Answer:
D- Release of dust during volcanic eruption
Explanation:
During major explosive eruptions huge amounts of volcanic gas, aerosol droplets, and ash are injected into the stratosphere. Injected ash falls rapidly from the stratosphere -- most of it is removed within several days to weeks -- and has little impact on climate change. But volcanic gases like sulfur dioxide can cause global cooling, while volcanic carbon dioxide, a greenhouse gas, has the potential to promote global warming.
answer:
a - decrease in the suns energy.
explanation:
although the other options do discuss climate, temperature, etc., the sun DIRECTLY influences the earth's climate and would most likely affect it on a larger scale. for example, warm and cold ocean currents would affect the temperature of the ocean and could touch bay cities or islands, but they would not dictate the overall climate of the earth :)
♡ hopefully my reply helped you come to an answer~ please keep in mind that my response is purely that... MY response! i still have lots to learn, so please correct/educate me if you have found otherwise ♡
ASAP
Which of the following gases will have the highest rate of effusion at a given temperature?
Cl2
He
O2
Ne
Answer:
chlorine Will be at highest
Plz help me with this question
Drawing of water molecular formulas
1.Draw molecular structure of water
Answer:
Here is your answer. I hope it will help you .ayo could u help me out
wer the following questio What is meant by a solutio What is a saturated solutio Define: give an example.
Answer:
A solution in which the maximum amount of solvent has been dissolved. Any more solute added will sit as crystals on the bottom of the container.
Explanation:
A solution in which the maximum amount of solvent has been dissolved. Any more solute added will sit as crystals on the bottom of the contain
er.
How does knowing the reactants and
help you classify a chemical reaction?
if you know what kind of chemical a reactant is, it can help you to quickly distinguish the chemical reaction.
Ex:
HCl + KOH <---> KCl + H2O
We can look at the reactants and identify that this reaction is an acid-base reaction because HCl is an acid (it gave a proton) and KOH is a base (it accepted the proton)
Answer:
Products
Explanation:
I just got it right.
Aniline involves an amine, which is a Choose... functional group. When an aqueous acid solution is added to an organic solution including aniline, the aniline appears in the Choose... layer in its Choose... form. Then, a base is added to Choose... the aniline.
Answer:
Basic
Aqueous
Protonated
Reconstitute
Explanation:
Aniline contains the -NH2 group in which the hydrogen atom bears a lone pair of electrons which is capable of accepting a proton hence aniline is basic.
This lone pair makes it possible for aniline to be protonated to yield an ionic substance which enters into the aqueous phase.
Addition of a base leads to the reconstitution of the aniline.
Question 5
1.00 g of He, 14.0g F2, and 19.0 g Ar are placed in a 13.0-L container at 20.0 °C.
The total pressure (in atm) in the container is _____ atm.
1 point
Answer:
2.03 atm
Explanation:
Number of moles of He = 1g/4g/mol = 0.25 moles
Number of moles of F2 = 14.0g/38 g/mol = 0.37 moles
Number of moles of Ar=19.0g/40g/mol = 0.48 moles
Total number of moles = 0.25 + 0.37 + 0.48 = 1.1 moles
From;
PV=nRT
P= pressure of the gas mixture
V= volume of the gas mixture
n= total number of moles of the gas mixture
R= gas constant
T= temperature of the gas mixture
P= nRT/V
P= 1.1 × 0.082 × 293/13
P= 2.03 atm
Balance the redox reaction by oxidation number or ion electron method and indicate oxidizing and reducing agent . KMno4 + KBr + H2SO4 approach K2SO4 + MnSO4 + H2O + Br2
Answer:
2KMnO₄ (aq) + 10KBr (aq) + 8H₂SO₄ (aq) -> 2MnSO₄ (aq) + 5Br₂ (aq) + 6K₂SO₄ (aq) + 8H₂O (l)
oxidizing agent = KMnO₄
reducing agent = KBr
Explanation:
KMnO₄ -> 2Mn⁷⁺ + 10e⁻ = 2Mn²⁺
KBr -> 10Br⁻⁺ - 10e⁻ = 10Br⁰
is magnetism, reactivity, and fluorescence used to identify minerals
hii pls help me to balance the equation and state the symbols thanksss
Answer:
First you have to write the chemical equation
Fe + Hcl----->FeCl2 + H
to balance this equation you have to put a 2 in front of hydrochloric acid and hydrogen
Fe + 2Hcl----->FeCl2 + 2H
I hope this helps
Answer:
I hope the above link will be of help
Tips for high school
Answer:
stoichiometry is hard but the rest is kinda easy if u pay attention
Explanation:
Answer:
study your tail off, chemistry requires it. I failed because I did not study.
Explanation:
A certain volume of gas S takes 180 secs to diffuse through a porous plug. An equal amount of gas Q takes 240 secs to diffuse the same plug. Calculate the molar mass of gas Q if the molar mass of gas S is 18.
Answer:
31.98g/mol
Explanation:
Using Graham's law of diffusion, which states that the rate of diffusion of a gas is inversely proportional to the square root of its molecular mass (M). Rate of diffusion = volume/time.
Since both gas S and Q have equal volumes, we can calculate molecular mass of gas Q as follows:
tQ/tS = √mQ /√mS
Where:
tQ = time of diffusion of gas Q
tS = time of diffusion for gas S
mQ = molar mass of gas Q
mS = molar mass of gas S
According to the information provided in this question;
tQ = 240s
tS = 180s
mQ = ?
mS = 18g/mol
Using tQ/tS = √mQ /√mS
240/180 = √mQ / √18
1.333 = √mQ / √18
Square both sides
1.333² = mQ/18
1.78 = mQ/18
mQ = 18 × 1.78
mQ = 31.98g/mol
Molar mass of Q = 31.98g/mol
Iron and chlorine form an ionic compound whose formula is FeCl3. The name of this compound is __________. Group of answer choices iron chlorine iron (III) chloride moniron trichloride iron (III) trichloride ferric trichloride
Answer:
Iron and chlorine form an ionic compound whose formula is FeCl3. The name of this compound is iron (III) chloride or iron trichloride.
Explanation:
Iron (III) chloride or Iron trichloride is also known as ferric chloride, it is a common compound of iron in the +3 oxidation state. The anhydrous compound is a crystalline solid with a melting point of 307.6 °C.
Explain which intermolecular force is primarily responsible for the unusually high boiling point of H2OH2O. Compare the strengths of intermolecular forces of attraction present in a sample of liquid water to the strengths of intermolecular forces of attraction present in liquid samples of H2SH2S, H2SeH2Se, and H2TeH2Te. Justify your answer using the information presented in both tables, and complete the statements below.
Answer:
See explanation
Explanation:
Intermolecular forces are forces of attraction that exist between molecules of a substance in a particular state of matter.
The dominant intermolecular force of attraction in H2O is the hydrogen bond. The hydrogen bond exists between molecules of a substance when the substance is made of hydrogen atoms bonded to atoms of a highly electronegative element. Hence, strong hydrogen bonding accounts for the high boiling point of water.
The magnitude of hydrogen bonding between molecules depends on the electro negativity of the atoms to which hydrogen is bonded.
The more the electro negativity of the atoms to which hydrogen is bonded, the greater the magnitude of intermolecular hydrogen bonding.
Since the electro negativity of elements decrease down the group, the strength of intermolecular hydrogen bonding between the molecules decreases as follows;
H2O> H2S> H2Se> H2Te
what is mean by measurement
Answer:
Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. ... Extent, quality, or size as determined by measuring; dimension. A waist measurement of 32 inches.
Explanation:
The comparison o unknown quantity with known standard quantity is called measurement.
PLZ HELP ME WITH MY WORK
Answer:
c. H2 andO2
I think this is the answer not sure ok
what is precipitating ???
anyone please tell me how to delete an I'd
Explanation:
Desposition of solid matter in a solution
what apparatus is used to investigate the conductivity of solutions
If 0.507J of heat leads to a 0.007 degree C change in water, what mass is present?
0.0337 g
17.3 g
0.239 g
0.300 g
Answer:
17.3 g
Explanation:
Given the following data;
Quantity of heat, Q = 0.507 JTemperature = 0.007°CSpecific heat capacity of water = 4.2 J/g°CMathematically, Heat capacity is given by the formula;
[tex] Q = MCT [/tex]
Where;
Q represents the heat capacity or quantity of heat. M represents the mass of an object. C represents the specific heat capacity of water. T represents the temperature.Making "M" the subject of formula, we have;
[tex] Mass, \ m = \frac {Q}{CT} [/tex]
Substituting the values into the formula, we have;
[tex] Mass, \ m = \frac {0.507}{0.007*4.2} [/tex]
[tex] Mass, \ m = \frac {0.507}{0.0294} [/tex]
Mass, m = 17.3 grams
what is chemical formula of water ? how it is composed
Answer:
H2O
Explanation:
it is composed of 2 atoms of Hidro and 1 atom Oxy
Answer:
The chemical formula for water is H2O..it is composed by the bonding of 2 molecules of hydrogen and one molecule of oxygen,a covalent bond to be specific.
I hope this helps
Which coefficient of O2 is needed to balance the equation C3H8 + O2 → 3CO2 + 4H2O?
A.
2
B.
3
C.
5
D.
6
The answer is C. 5
Hope I helped
When 4.2 gram of sodium bicarbonate reacts with 10.0 g of acetic acid, the product contains 2.2 g of carbon dioxide and residue cxontaining water and Sodium acetate. The mass of the residue will be:- *
Na2CO3+2HCl⟶2NaCl+H2O+CO2
Law of conservation of mass- It states that for any closed system, the mass of the system always remain constant over time, as mass of system cannot change. Therefore, (mass of Na2CO3+ mass of HCl) should be equal to (mass of residue + mass of CO2)
Mass of Na2CO3=4.2 g
Mass of HCl=10 g
Mass of residue =12 g
Mass of CO2=2.2 g
∴ Mass of Na2CO3+ Mass of HCl=14.2 g
and Mass of residue + Mass of CO2=14.2 g
Therefore, they follow law of conservation of mass.
What is the density of ammonia (NH3) at 273 K and 1.00 atm?
A - 0.7601 g/L
B - 0.982 g/L
C - 1.23 g/L
D - 2.43 g/L
Answer:
0.7602 g/L
Explanation:
We'll begin by calculating the molar mass of NH₃. This can be obtained as follow:
Molar mass of NH₃ = 14.01 + (3×1.01)
= 14.01 + 3.03
= 17.04 g/mol
Finally, we shall determine the density of ammonia, NH₃. This can be obtained as follow:
Temperature (T) = 273 K
Pressure (P) = 1 atm
Molar mass of NH₃ (M) = 17.04 g/mol
Gas constant (R) = 0.0821 atm.L/Kmol
Density (D) =?
D = PM / RT
D = (1 × 17.04) / (0.0821 × 273)
D = 17.04 / 22.4133
D = 0.7602 g/L
Answer:
It is A
Explanation:
During an experiment the students prepared three mixtures A)Starch in water B) Sodium chloride solution C) Tincture of Iodine. i) Students observed a visible beam of light through mixture A. Why? ii) Tincture of Iodine did not show Tyndall effect . Explain reason. iii) How can you relate particle size to Tyndall effect?
The question requires a good knowledge of the meaning of Tyndall effect or scattering of light by false solutions in chemistry
The student observed a beam of visible light through mixture A because A exhibits Tyndall effect
Tincture of Iodine does not show Tyndall effect because its solution consists of particles less than 1 nanometer in solution.
A solution may be classified as a true solution or a false solution. A true solution consists of particles which are less than 1 nanometer in solution. A true solution does not scatter visible light.
A false solution, on the other hand consists of particles larger than 1 nanometer and does scatter visible light.
Starch in water is an example of a false solution or colloid hence it exhibits Tyndall effect. The scattering of visible light by a solution is known as Tyndall effect.
Tincture of iodine and sodium chloride in water are all true solutions hence they do not scatter visible light.
https://brainly.com/question/23487849
breaking larger molecules into smaller molecules and carbon
Answer: catabolism
Explanation:
Catabolism refers to the set of metabolic pathways which is necessary for the breaking down of molecules into smaller units. This is then oxidized for the release of energy or can be used to perform other anabolic reactions.
Catabolism is regarded as the opposite direction of anabolism which is simply the building-up of molecules. It should be noted that anabolism and catabolism work together in every living organisms and perform functions such as the production of energy and the repair of cells.
In a synthesis experiment you obtain a sample of product on which you do a melting point determination and find a melting point range of 114 to 125 degrees Celsius. The sample is supposed to be acetylsalicyclic acid. What preliminary conclusion(s) can you reach from this one determination
Answer:
The melting point determination may need improvement- it may not have been done properly, and make sure it was repeated at least once.
Explanation:
Given that we know the actual melting point of pure acetylsalicyclic acid to be 135°, it follows that the process followed to obtain the melting point range of 114 to 125 degrees Celsius must be inaccurate.
Therefore, we can conclude that, the melting point determination may need improvement. It may not have been done properly, and we must make sure it is repeated at least once.
25.Which of the following reaction will not take place?
A. Zn+ FeSO4 → ZnSO4 + Fe
C. Fe + NiSO4 → FeSO4 + Ni
B. 2Al + 3MgSO4→ Al2(SO4)3 + 3Mg D.
Cu + 2AgNO3 → Cu(NO3)2 + 2Ag
Answer:
B
Explanation:
because Mg is stronger than Al
For each pair (4), choose the stronger bond:
1. H–F (single bond) or H–Cl (single bond)
2. C–C (single bond) or C=C (double bond)
3. F–F (single bond) or H–F (single bond)
4. O=O (double bond) or C=C (double bond)
Answer:
line 3
Explanation:
let me know if you have any questions
Molar mass of C^6H^12O^6
Answer:
The molar mass of C6 H12 O6 is 180.15588 g/mol.
Explanation:
The hydroboration of an alkene occurs in ___________ which places the boron of the borane on the ___________ carbon of the double bond. The oxidizing agent then acts as a nucleophile, attacking the electrophilic _____________ and resulting in the placement of a hydroxyl group on the attached carbon. Thus, the major product of the hydroboration oxidation reaction ______ follow Markovnikov's rule.
Answer: The hydroboration of an alkene occurs in TWO CONCERTED STEP which places the boron of the borane on the LESS SUBSTITUTED carbon of the double bond. The oxidizing agent then acts as a nucleophile, attacking the electrophilic BORON and resulting in the placement of a hydroxyl group on the attached carbon. Thus, the major product of the hydroboration oxidation reaction DOES NOT follow Markovnikov's rule.
Explanation:
Hydroboration is defined as the process which allows boron to attain the octet structure. This involves a two steps pathway which leads to the production of alcohol.
--> The first step: this involves the initiation of the addittion of borane to the alkene and this proceeds as a concerted reaction because bond breaking and bond formation occurs at the same time.
--> The second step: this involves the addition of boron which DOES NOT follow Markovnikov's rule( that is, Anti Markovnikov addition of Boron). This is so because the boron adds to the less substituted carbon of the alkene, which then places the hydrogen on the more substituted carbon.
Note: The Markovnikov rule in organic chemistry states that in alkene addition reactions, the electron-rich component of the reagent adds to the carbon atom with fewer hydrogen atoms bonded to it, while the electron-deficient component adds to the carbon atom with more hydrogen atoms bonded to it.
