Position graph and time looking for velocity on runners for time interval between 5 seconds and 10 seconds

Position Graph And Time Looking For Velocity On Runners For Time Interval Between 5 Seconds And 10 Seconds

Answers

Answer 1

The Position-Time graph is the graph where the time t and the particle's instantaneous position x are shown on the y-axis and x-axis, respectively.

What is Position -Time Graph?

A position-time graph, can be used to depict an object's motion. The y-axis of this sort of graph denotes position in relation to the starting point, while the x-axis denotes time. An object's distance from its beginning position at any given moment since it began moving is displayed on a position-time graph.

In a position-time graph, the slope, or steepness, of the graph line represents the velocity of the moving item. The slope and velocity are both zero if the graph line is horizontal. The object's position is staying the same. The greater the slope of the line and the faster the object's velocity changes, the steeper the line must be.A position-time graph makes it simple to determine the average velocity of a moving item. The change in location (represented by Δd) divided by the corresponding change in time (represented by Δt) is the average velocity:

Velocity=Δd/Δt

A position-time graph, which depicts time on the x-axis and location with relation to the beginning point on the y-axis, can be used to visualise motion.A position-time graph's slope is a measure of velocity. The rate of change of motion increases with slope steepness.A position-time graph can be used to determine average velocity, which is equal to the change in position divided by the corresponding change in time.

To know more about Position -Time Graph,Refer to:

https://brainly.com/question/29042050

#SPJ1


Related Questions

which of the following patterns would you observe if you started at sea level and traveled upward through the earth's atmosphere to an elevation of 100 km?

Answers

The patterns would you observe if you started at sea level and traveled upward through the earth's atmosphere to an elevation of 100 km are-

decreasing pressure decreasing density

In this case, Option B and F are correct.

The atmosphere is what?

The layer of gases that envelops the Earth and other planetary bodies is the atmosphere. It is made up of various gases, including nitrogen, oxygen, and others, as well as vaporized water, dust, and other materials. The atmosphere shields us from harmful solar radiation while also assisting in climate control on Earth. Life on Earth as we know it would not exist without it.You would notice a drop in temperature, an increase in air pressure, and a drop in the amount of oxygen available if you started your journey at sea level and rose through the Earth's atmosphere.As you ascended, you would also notice a reduction in the amount of dust, water vapor, and other atmospheric particulates.

To know more about atmosphere click-

brainly.com/question/30157320

#SPJ4

Which of the following patterns would you observe if you started at sea level and traveled upward through the Earth's atmosphere to an elevation of 100 km? Choose one or more:

A. a progressive decrease in temperature

B. decreasing pressure

C. changes from warming trends to cooling trends at distinct boundaries D. increasing pressure

E. increasing density

F. decreasing density

1. Why is it necessary to do a vector resolution problem using the force of Static Friction, in order to theoretically determine the Angle of Repose?
2. What does a very low Angle of Repose tell you about the kind of surface at play?
3. What does it tell you about the Coefficient of Static Friction?

Answers

Answer:

A stone is thrown up wards with an initial velocity of 25 m/s at an angle of 30 to the ground.

until he was in his seventies, henri lamothe excited audiences by belly-flopping from a height of 9 m into 31 cm. of water. assuming that he stops just as he reaches the bottom of the water and estimating his mass to be 60 kg, find the magnitudes of the impulse on him from the water.

Answers

The magnitude οf the impulse is  −1120 Ns.

How to calculate the magnitude of the impulse?

In its simplest form, an impulse is a fοrce that has been gradually integrated. By dividing the force's magnitude by the length of time it is applied, we can calculate the impulse's size for a force with a constant magnitude.

From the infοrmation given, the fοllowing can be deduced:

Height = 10m

Mass = 64kg

The kinetic energy is calculated as 1/2mv² while pοtential energy is calculated as mgh. Frοm the law of conversation:

[tex]\mathrm{ \dfrac{1}{2} mv^2 = mgh}[/tex]

[tex]\mathrm{v = \sqrt{2gh} }[/tex]

[tex]= \sqrt{2} \times \sqrt{9.8 } \times\sqrt{9}[/tex]

= 13.28 m/s

The change in velocity will be;

= 80(0 - 14)

= 80 × (-14)

= −1120 Ns

In cοnclusion, the magnitude οf the impulse is −1120 Ns.

Learn mοre about impulse on:

brainly.com/question/229647

#SPJ4

use the idea that vertical motion is independent of horizontal to predict which ball lands first. make sure that you base your prediction on the explanation that vertical motion is independent of horizontal motion.

Answers

A projectile moves both vertically and horizontally independently of one another. Therefore, regardless of their horizontal velocities, two objects falling under the influence of gravity from the same height will hit the ground at the same time.

Explain that vertical motion is independent of horizontal motion?

The vertical force acts perpendicular to the horizontal motion and has no effect on it because perpendicular components of motion are independent of one another. The projectile as a result moves with a decreasing vertical acceleration and a constant horizontal speed. The principle that horizontal and vertical motions are independent, or that they have no bearing on one another, is the most crucial one in projectile motion. The amount of time needed for an object to move initially horizontally is equal to the amount of time needed for the object to reach its final height. As a result, a ball dropped from the same height and thrown horizontally will both arrive at the ground simultaneously.

Here,

A projectile moves independently in both the vertical and horizontal axes. Therefore, two objects falling under the influence of gravity from the same height will hit the ground at the same time regardless of their horizontal velocities.

To know more about motion,

https://brainly.com/question/13966796

#SPJ4

As shown, a server at a restaurant is carrying a tray that has a glass of water resting on it. The glass and tray exert a force with magnitude F1 = 4.00 on the server's hand. If l1 = 1.45 ft, l2 = 1.15 ft, l3 = 0.500 ft, σ1 = 145o, and σ2 = 110o, what is the moment of force about the shoulder joint at point A? Assume that moments acting in the counterclockwise direction about point A are positive whereas moments acting in the clockwise direction are negative. ft
MA = ??? lbo ft

Answers

positive while seconds moving counterclockwise Direction are negative 1.18lb.ft

What is the most accurate way to define direction?

Direction is characterized as the course that anything follows, the route that needs to be taken to go to a particular location, the direction where something is beginning to take shape, or the direction you are facing. When you turn right instead of left, that is an illustration of direction.

WHY IS DIRECTION ESSENTIAL?

Directions explain how to perform an action or the proper sequence. You are provided instructions for a number of your activities and assessments. It's critical to comprehend the motivation behind the instructions. Before starting anything, it's also crucial to follow ALL of the instructions.

To know more about direction visit:

https://brainly.com/question/30173481

#SPJ4

Find the average power Pavg created by the force F. Express your answer in terms of the given quantities and, if necessary, appropriate constants. You may or may not use all of the given quantities (F, m, μk, t, s).
Let us now consider some questions that include numeric data.
A sled is being pulled along a horizontal surface by a horizontal force F⃗ of magnitude 600 N. Starting from rest, the sled speeds up with acceleration 0.08 m/s2 for 1 minute.
Part F
Find the average power Pavg created by the force F⃗ .
Express your answer in watts to three significant figures.
Find the instantaneous power P created by the force F⃗ at t=10s.
Express your answer in watts to three significant figures.

Answers

Average power Pavg created by the force F is 48 watts, instantaneous power P at t = 10s is 480 watts.

To find the average power created by the force F, we can use the formula:

Pavg = (Work done by the force) / (time interval)

The work done by the force F can be found using the formula:

Work = force x distance

The distance is the displacement of the sled, which can be found using the formula:

distance = (initial velocity + final velocity) / 2 * time

The sled starts from rest, so its initial velocity is 0 m/s.

We know that the acceleration of the sled is 0.08 m/s^2 and the time is 1 minute, which is 60 seconds.

So the final velocity is:

final velocity = 0 + 0.08 m/s^2 x 60s = 4.8 m/s

We know that the force F is 600 N, so the work done by the force is:

Work = F x distance = 600 N x (4.8 m/s) = 2880 J

We know that the time interval is 1 minute, which is 60 seconds.

So the average power created by the force F is:

Pavg = Work / time interval = 2880 J / 60s = 48 watts (to 3 significant figures)

To find the instantaneous power P at t = 10s, we can use the formula:

P = F x v

where v is the velocity of the sled at time t.

We can find the velocity of the sled at time t using the formula:

v = v0 + a*t

where v0 is the initial velocity (0 m/s), a is the acceleration (0.08 m/s^2) and t is the time (10s)

so we can substitute v = v0 + a*t

v = 0 + 0.08 m/s^2 x 10s = 0.8 m/s

We know that the force F is 600 N, so the instantaneous power P created by the force F at t=10s is:

P = F x v = 600 N x 0.8 m/s = 480 watts (to 3 significant figures)

To know more about average power please refer: https://brainly.com/question/14831024

#SPJ4

thurat the boiling point, the density of the liquid is and that of the gas is . how many liters of liquid nitrogen are produced when of nitrogen gas is liquefied at ? round your answer to significant figures.

Answers

When the melting point, liquid density, and gas density are specified, 1.360 L of liquid nitrogen is created.

We presume that the specified volume of gas is fully liquefied because no other requirements are provided (no equilibrium gas phase).

Determine the mass of nitrogen as follows:

241.0L * 4.566 g/L = 1100.406g.

Determine the amount of liquid nitrogen based on the mass determined in step 2:

Volume = mass/liquid density = 1100.406g/L = 1.360 L.

A liquid's density is a measurement of how heavy it is for the amount measured. When two liquids of identical weight or volume are weighed, the heavier liquid is more dense. A liquid that is less dense than water will float on the surface of the water if it is gently added to the surface.

The correct question is:

At the boiling point, the density of liquid nitrogen is 809 g/L and that of the gas is 4.566 g/L. How many liters of liquid nitrogen are produced when 241.0 L of nitrogen gas is liquefied at 77.36 K?

Learn more about Density here:

https://brainly.com/question/6329108

#SPJ4

A 60.-kilogram man is pushing a 30.-kilogram lawn mower. Compared to the magnitude of the force exerted on the lawn mower by the man, the magnitude of the force exerted on the man by the lawn mower is
answer choices
O one-quarter as great
O one-half as great
O the same
O twice as great
O the same

Answers

The magnitude of the force exerted on the man by the lawn mower is equal in magnitude to the force exerted by the man on the lawn mower, thus the answer is the third option i.e. the same.

Following are the three Newton's Law of Motion:

First Law - Newton’s first law of motion states that if a body or a object is at rest or moving at any constant speed in a straight line, it will remain at rest or keep moving in that straight line at that constant speed unless it is acted upon by a force. This law is known as Law of Inertia.

Second Law - Newton’s second law of motion is a quantitative description of the changes that any force can produce/insert on the motion of a body. It states that the timely rate of change of the linear momentum of a body is equal in both the magnitude and the direction to the force imposed on it.

Third Law - Newton’s third law of motion states that when two bodies interact, they both apply forces to one another that are equal in magnitude and opposite in direction. This third law of motion is also known as the law of action and reaction.

Using principles of third law of motion, we can make that the man pushing the lawn mower applies the same amount of force (in magnitude) as the lawn mower applies on him, thus the answer to the question is the third option i.e. the same.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ4

which of the following best describes why we have seasons on earth? view available hint(s)for part a which of the following best describes why we have seasons on earth? the tilt of earth's axis causes the northern hemisphere to be closer to the sun than the southern hemisphere in summer, and vice versa in winter. the tilt of earth's axis causes different portions of the earth to receive more or less direct sunlight at different times of year. earth's elliptical orbit means we are closer to the sun and therefore receive more intense sunlight at some times of year than at others. the varying speed of earth in its orbit around the sun gives us summer when we are moving fastest and winter when we are moving slowest.

Answers

Thee tilt of earth's axis causes the northern hemisphere to be closer to the sun than the southern hemisphere in summer, and vice versa in winter.

In this case, option A is correct.

Describe the seasons: Each season is a distinct time of year that can be recognized by special climatic characteristics. Every year, the seasons of spring, summer, fall, and winter follow one another. Each experiences cyclical patterns of light, climate, and weather every year.

Why are the seasons so important?

Soil saturation, precipitation patterns, river flows, lake concentrations, and snow cover are all impacted by seasonal variations in temperature and precipitation. Plants deteriorate and leaves fall as the wet and cold seasons approach. These alterations in the flora have an impact on the type and availability of food for humans and other animals.

To know more about seasons visit:

brainly.com/question/21698090

#SPJ4

Two horizontal forces, 225 and 165 N, are exerted on box. If these forces are applied on same direction, find the net horizontal force on the box.

Answers

When two forces are applied in the same direction, we can use the vector addition to find the net force. The net force is found by adding the magnitudes of both forces.

In this case, the two forces are 225 N and 165 N, and they are applied in the same direction.

Therefore, the net horizontal force on the box is:

Net force = force 1 + force 2 = 225 N + 165 N = 390 N

This means that the net force acting on the box is 390 N when two horizontal forces, 225 N and 165 N, are exerted on the box in the same direction.

What happens when a cold piece of metal is placed in hot water?

heat will flow from the water to the metal
heat will flow from the metal to the water
temperature will flow from the water to the metal
temperature will flow from the metal to the water

Answers

Heat will flow from hotter region to the colder region. When a cold piece of  metal is placed in hot water heat will flow from water to the metal.

What is heat transfer ?

Heat energy will transfer between regions over a temperature gradient. Heat flows from hotter regions to colder regions to balance the total heat energy.

In solids, heat transfer takes place by conduction mechanism where one hotter molecules transfers the energy to nearest molecules in the closely packed chain. In liquids and gases, heat transfers through convection.

When a cold piece of metal is paced in hot water, the heat energy from the water will flow to the colder metal. Hence, the temperature of water will reduce.

Find more on heat transfer;

https://brainly.com/question/13433948

#SPJ1

you are making a telephone out of two aluminum cans and some string. you can choose between two types of string: a 2-m length of thin cooking twine or a 2-m length of heavy rope, both used at the same tension. which type of string should you use so that you have the fastest wave speed in your telephone? (figure 1)

Answers

You should use the thin cooking twine to have the fastest wave speed in  telephone.

What is wave speed?

The wave speed in string is determined by tension in the string and the mass per unit length (linear density) of the string.

The speed of a wave in a string is given by ; v = sqrt(T/μ)

T -- tension and μ-- linear density.

When comparing the two types of string, thin cooking twine has smaller mass per unit length (linear density) than the heavy rope, so it would have  faster wave speed.

The thinner the string, the less the density of the string and the faster the wave speed will be. Therefore, you should use the thin cooking twine to have the fastest wave speed in your telephone.

To know more about wave speed, refer

https://brainly.com/question/29798763

#SPJ4

difference between speed and velocity, and describe how speed and velocity impact your acceleration.

Answers

Speed is the rate at which an object moves, while velocity is the speed of an object in a given direction, and acceleration is affected by both speed and velocity, as an increase in either can cause an increase in acceleration.

How is speed and velocity measured? Speed is the rate at which an object is travelling at any given moment, usually measured in units such as miles per hour (mph) or kilometers per hour (kph). Velocity is the rate of change in the object’s position over a period of time, typically measured in units such as meters per second (m/s).Speed can be measured directly, using devices such as radar guns, and is also inferred from distance and time measurements. Distance can be measured using a variety of methods, such as a ruler, a GPS device, or a map. Time can be measured using a stopwatch, a clock, or by measuring the amount of time it takes an object to travel a certain distance.Velocity is calculated by dividing the distance an object has traveled by the amount of time it took to travel that distance. For example, if an object moves a distance of 5 meters in 2 seconds, its velocity is 2.5 m/s.Speed and velocity can also be measured indirectly, using a variety of instruments such as accelerometers, gyroscopes, and other motion sensors. These instruments measure the object’s acceleration, which is the rate of change of its velocity over time. By combining the measurements of acceleration, distance, and time, speed and velocity can be calculated.

To learn more about speed and velocity refer to:

https://brainly.com/question/21729272

#SPJ4

The speed of light is ×2.998108/ms. How long does it take light to travel 90.cm?
Set the math up. But don't do any of it. Just leave your answer as a math expression.
Also, be sure your answer includes all the correct unit symbols.

Answers

Time=0.9/2.998*10^8 is the equation for how long it takes light to travel 90 cm.

What is speed?

Velocity is the rate and direction of an object's movement, whereas speed is the time rate at which an object is moving along a path. In other words, velocity is a vector, whereas speed is a scalar value. the speed at which an object's position changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined. The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate.

Here,

distance=90 cm=0.9 m

speed=2.998*10^8 m/s

thus time taken will be:

=distance/speed

time=0.9/2.998*10^8=0.10006 seconds

thus the expression is:

time=0.9/2.998*10^8

The expression for how long does it take light to travel 90 cm is time=0.9/2.998*10^8.

To know more about speed,

https://brainly.com/question/9998060

#SPJ4

A high fountain of water is located at the center of a circular pool as shown in the figure below. A student walks around the pool and measures its circumference to be 34.8 m. Next, the student stands at the edge of the pool and uses a protractor to gauge the angle of elevation of the top of the fountain to be = 60.0°. How high is the fountain?
m

Answers

The height of the fountain is 9.6 m.

What is the radius of the pool?

The radius of the pool is calculated by applying the formula for circumference of a circle.

P = 2πr

where;

r is the radius

r = ( P ) / ( 2π )

r = ( 34.8 ) / ( 2π )

r = 5.54 m

The height of the fountain is calculated as follows;

the angle of elevation, radius of the pool and the height of the fountain forms a right triangle.

let the height of the fountain = h

tan 60 = h / r

h = r x tan 60

h = ( 5.54 m ) x tan 60

h = 9.6 m

Learn more about height here: https://brainly.com/question/974651

#SPJ1

A spacecraft travels along a straight line from Earth to the Moon. At what distance from Earth does the force of gravity exerted by Earth on the coasting spacecraft cancel the force of gravity exerted by the Moon on the spacecraft? Use the Moon's orbit semimajor axis as a distance between planets. Express your answer to two significant digits and include the appropriate units.

Answers

The gravitational force between any two bodies is inversely proportional to the square of the distance between them. The distance from Earth at which the force of gravity exerted by Earth on the spacecraft cancels the force exerted by the Moon on the spacecraft is 384,400 km.

What is a gravitational force?

Gravitational force is a natural phenomenon by which all objects with mass attract each other. This force is one of the four fundamental forces of nature, and is the weakest of the four. It is the force that binds us to the Earth and keeps our feet firmly planted on the ground.

Part A: The gravitational force between any two bodies is inversely proportional to the square of the distance between them. Therefore, the force of gravity exerted by Earth on the spacecraft will be equal to the force of gravity exerted by the Moon on the spacecraft when the distance between them is equal to the Moon's orbit semimajor axis.

Part B: The Moon's orbit semimajor axis is 384,400 km. Therefore, the distance from Earth at which the force of gravity exerted by Earth on the spacecraft cancels the force of gravity exerted by the Moon on the spacecraft is 384,400 km.

To two significant digits, the answer is 384,400 km.

To know more about gravitational force, visit

brainly.com/question/12528243

#SPJ4

 A penny is dropped off of the top of the Statue of Liberty, which is 93 meters tall. How long will it take for the penny to hit the ground?

Answers

Answer:

About 4.4 seconds

Explanation:

[tex]h=1/2(gt^{2} )[/tex]

[tex]t^{2} =\frac{2h}{g}[/tex]

[tex]t=\sqrt{\frac{2h}{g} }[/tex]

[tex]t=\sqrt{\frac{2(93)}{9.8} } =\sqrt{18.98} =4.36[/tex]

Hope this helps

FILL IN THE BLANK it is illegal to follow an emergency vehicle at a distance of_____or to stop within ______ of where an emergency vehicle is responding to an alarm.

Answers

It is illegal to follow an emergency vehicle at a distance of less than 500 feet or to stop within 300 feet of where an emergency vehicle is responding to an alarm.

How does maintaining a safe distance from an emergency vehicle enhance the safety of both the emergency vehicle's crew and other drivers on the road?

Maintaining a safe distance from an emergency vehicle enhances the safety of both the emergency vehicle's crew and other drivers on the road by providing the emergency vehicle with the necessary space to maneuver and respond quickly to an alarm. When an emergency vehicle is responding to an alarm, it may need to make sudden stops, turns or change speed quickly, and if the vehicle behind is too close, it may not be able to react in time and cause an accident. By maintaining a safe distance, other drivers can react in a timely manner to the emergency vehicle's movements, reducing the risk of collisions and accidents. Additionally, maintaining a safe distance can also help to increase visibility for the emergency vehicle's crew, which can help them to navigate through traffic more safely and quickly. This ultimately contributes to the safety of all parties involved.

This statement is referring to laws and regulations regarding the distance that a driver must maintain from an emergency vehicle that is responding to an emergency call or alarm. Following an emergency vehicle too closely, or stopping too close to where an emergency vehicle is responding to an alarm, can impede the emergency vehicle's ability to respond quickly and safely.

It is illegal to follow an emergency vehicle at a distance of less than 500 feet because this distance is considered to be too close and can pose a safety hazard to the emergency vehicle and its crew. When an emergency vehicle is responding to an alarm, it may need to make sudden stops, turns or change speed quickly and if the vehicle behind is too close, it may not be able to react in time and cause an accident.

It is also illegal to stop within 300 feet of where an emergency vehicle is responding to an alarm. Stopping too close to the emergency vehicle can block the view of other drivers and make it difficult for the emergency vehicle to maneuver. Additionally, it can impede the flow of traffic and make it difficult for other vehicles to pass, which can cause a backup and delay the emergency vehicle's response time.

In summary, these regulations are put in place to ensure the safety of emergency vehicle's crews and other people on the road, and to make sure that emergency vehicles can respond to an alarm quickly and safely.

To know more about safety hazard, visit: https://brainly.com/question/30275814

#SPJ4

a space stationis being builtin such a way that it can mimic earths gravity with centripetal acceleration, if the maximum tangetial velocity the ship can handle is 455 m/s. what should the radius of the ship be so the astronauts experience near earth gravity

Answers

One way to provide gravity in space is to spin a cylinder. The centripetal acceleration is provided by the normal force of the outside wall .

Why gravity is a force?

However, in the broader sense, gravity is indeed a force because it describes the resulting interaction between two masses. Gravitational effects are fundamentally caused by the warping of spacetime and the motion of objects through the warped spacetime. However, the end result is as if a force was applied.

What unit is 9.8 gravity?

The numerical value for the acceleration of gravity is most accurately known as 9.8 m/s/s. There are slight variations in this numerical value (to the second decimal place) that are dependent primarily upon on altitude.

To know more about gravity visit

https://brainly.com/question/12008506

#SPJ1

The spinning of a cylinder is one method of creating gravity in space. The outer wall's normal force produces the centripetal acceleration.

What makes gravity a force?

But in a larger sense, gravity is a force because it represents the interaction that happens when two masses are in close proximity to one another. Fundamentally, the curvature of geometry and the passage of things through the stretched spacetime are what produce gravitational effects. However, the outcome appears to be the consequence of applying force.

What unit of gravity is 9.8?

The most precise measurement of the gravitational acceleration is 9.8 m/s/s. This number has small fluctuations (to the first significant digit) that are mostly determined by altitude.

To know more about gravity visit:

https://brainly.com/question/940770

#SPJ1

gantemede is jupiter's largest moon. determine the gravitational field strength on the surface of ganymede

Answers

The gravitational field strength on the surface of Ganymede is equal to 1.75 × 10^11 m/s^2. This is approximately 200 times the gravitational field strength of Earth.

What is gravitatonal field?

Gravitational field is a region of space that is affected by the gravitational force of a massive object, such as a planet or star. It is the region in which any mass inside it experiences the force of gravity, and any mass outside of it does not. Gravitational fields can be measured in units called Newtons per kilogram (N/kg). The strength of the gravitational field is proportional to the mass of the object, with more massive objects creating stronger fields. In general, gravity is the weakest of the four fundamental forces, but it still has a profound effect on the behavior of matter and energy.

The gravitational field strength on the surface of Ganymede can be determined using Newton's law of gravity. According to this law, the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. Therefore, the gravitational field strength on the surface of Ganymede is equal to the gravitational force of Jupiter divided by the square of the distance between them.

The mass of Jupiter is 1.898 × 10^27 kg and the distance between Jupiter and Ganymede is 1.07 × 10^9 meters. Therefore, the gravitational field strength on the surface of Ganymede is equal to 1.75 × 10^11 m/s^2. This is approximately 200 times the gravitational field strength of Earth.

To know more about gravitatonal field click-
https://brainly.com/question/28437652
#SPJ4

determine the average force that the fist exerts on the head. ccording to a report on traumatic brain injury, the force that a professional boxer's fist exerts on his opponent's head is equivalent to being hit with a 5.9 kg bowling ball traveling at 8.9 m/s that stops in 0.018 s .

Answers

The average force applied to the skull by the fist is 5.9 kg x 498 m/s2, or 2,945 N.

What is force?

Force is an action that can cause an object to change its motion and/or shape. It can be an external force, such as gravity, or an internal force, such as friction. Forces can be applied by a single object, such as pushing on a wall, or they can be the result of two objects interacting, such as when two objects collide. Newtons are used to measure force, which is a vector quantity both with magnitude and direction.

F = m x a

formula a = (Vf - Vi) / t

Therefore, the average force that the fist exerts on the head is 5.9 kg x 498 m/s2, which equals 2,945 N.

To learn more about force

https://brainly.com/question/13191643

#SPJ4

A large adult is teaching a small child to ice skate. The adult has five times the mass of the child. They stand facing each other on the ice and push against each other to coast backwards. Which of the following best describes the force of the adult on the child, the force of the child on the adult, and their initial velocities?
A. The forces form an action-reaction pair, and the child velocity is five times the velocity of the adult and in the opposite direction.
B. The forces form an action-reaction pair, and the adult velocity is five times the velocity of the child and in the opposite direction.
C. The forces do not form an action-reaction pair, and the child velocity is five times the velocity of the adult and in the opposite direction.
D. The forces form an action-reaction pair, and the adult and child coast away at velocities that are equal in magnitude but opposite in direction.

Answers

The answer to the question is Option A i.e. the forces form an action-reaction pair, and the child velocity is five times the velocity of the adult and in the opposite direction.

According to Newton’s third law of motion (every force has an equal and opposite reaction force), when two bodies interact, both of them apply forces on one another that are equal in magnitude but opposite in direction. This third law of motion by Newton is also known as the law of action and reaction and the forces form a action-reaction force.

Thus, when the adult pushes the child with a force of any magnitude, the child pushes the adult with the same magnitude force but in opposite direction thus the forces are a form of action-reaction pair.

as, F = ma and the forces are equal in magnitude for both, the velocity of the adult and that of the child have an inverse relation as that of masses of both, thus the velocity of child is five times that of the adult.

Thus, the answer to the question is Option A.

ALSO, the conditions follow the law only because the man and the child are standing on a frictionless floor i.e. ice so there is no static friction in play holding the heavier mass back for force to be nullified.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ4

Two objects are traveling around different circular orbits with constant speed. They both have the same acceleration but object A is traveling twice as fast as object B. The orbit radius for
object A is _____ the orbit radius for object B
A. one-fourth
B. one-half
C. the same as
D. twice
E. four time

Answers

The orbit radius for object A is B. one-half the orbit radius for object B

If the velocity only changes in direction (constant speed), then its acceleration has constant magnitude and is called centripetal.

Do elliptical orbits have constant velocities?

An orbit that is perfectly balanced and has a constant speed is called a circular orbit. There are countless different elliptical orbits where velocity and speed are variable.

The velocity of an item rotating in a circle at a constant speed changes. This is thus because velocity depends on both speed and direction as a vector variable. Even if its speed is constant, the object in orbit is accelerating because its velocity is changing.

Learn more about acceleration

https://brainly.com/question/460763

#SPJ4

Explain which of the four fundamental forces is responsible for a ball bouncing off the ground after it hits, and why this force has this effect.

Answers

The force responsible for the bouncing of the ball is the gravitational force.

According to Newton's law of universal gravitation, the gravitational force between any two bodies is directly proportional to the product of their masses and inversely proportional to the square of the distance between them. Gravity is the force with which objects are attracted to the earth. Example - Leaves and fruit fall from a tree to the ground due to gravity. Gravitational energy is the energy stored in an object due to its height above the Earth (for example, when the object is far from the ground or near it). It is a form of potential energy. An object's height above the ground gives it its gravitational energy. This force is responsible for the bouncing of the ball when it hits the ground.

Learn more about the fundamental forces in

https://brainly.com/question/14110395

#SPJ4

IS there an afterlife

Answers

Answer: Depends

Explanation:

It completely depends on your religion and beliefs. This is not a question you can truly answer since it's opiniative.

according to erikson, preschoolers' exuberant play and bold efforts to master new tasks break down when they .

Answers

Erikson believed that the adverse effect of early childhood was an excessively rigid superego that led to children feeling excessive guilt as a result of adults' excessive threats, criticisms, and punishments.

What is rigid?

A body that does not deform or change shape is idealized as a rigid body. Formally, it is described as a group of particles with the property that their distance from one another does not change as the body moves. A solid body that neglects deformation is referred to as a rigid body. In other words, regardless of the forces acting on a rigid body, the distance between any two points remains constant over time. A metal rod serves as an illustration of a rigid body.

Here,

Erikson thought that an excessively rigid superego, brought on by adults' excessive threats, criticisms, and punishments, was the negative effect of early childhood, which caused children to experience excessive guilt.

To know more about rigid,

https://brainly.com/question/17156004

#SPJ4

polly ester and ray ahn are doing the elastic collision lab on a low-friction track. cart a has a mass of 0.75 kg and is moving rightward at 14.7 cm/s prior to the collision with cart b. cart b has a mass of 2.00 kg and is moving leftward with a speed of 64.2 cm/s.

Answers

The post-collision speed and direction of cart B in cm/s is 32.5 cm/s in the right

From the law of conservation of momentum, the sum of initial momentum equals the sum of final momentum

Momentum, p-mv where m is the mass and v is the velocity

m1v1 + m2v2 = (M1V2 + M3V₁)

Let right direction be positive while left negative hence

1 x 27.6 + (0.5*-42.9) = 1 x -10.1 + 0.5v

16.25 = 0.5v

v = 16.25/0.5 = 32.5 cm/s in the right

Hence, post-collision speed and direction of cart B in cm/s is 32.5 cm/s in the right

Learn more about Speed here:

https://brainly.com/question/3004254

#SPJ4

When you park on a hill, the direction your ____ are pointed determines which direction your car will roll if the brakes fai

Answers

When you park on a hill, the direction your front wheel are pointed determines which direction your car will roll if the brakes fail

Option D is correct.

Adjust your front tires so that, in the event of a brake failure, all front wheels are always pushed away from or lightly contact the curb if there is no curb.

When you park on a hill, which direction is influenced by where you look?

When going uphill and coming close to a curb, turn the front tires against the curb. and make use of the curb as a barrier by letting your car slowly drift backward until the left rear wheel is resting there.

On a hill, how do you park gradually?

Turn the wheels to the curb.

Turn your vehicle away from the curb when parking uphill. Turn them so that they are facing the curb if you are parking downhill. Step on the brake while the vehicle is in neutral, then fully rotate the steering wheel in the desired direction.

Question incomplete:

When you park on a hill, the direction your ____ are pointed determines which direction your car will roll if the brakes fail.

A. Side mirror

B. doors

C.rear wheels

D.front wheels

Learn more about front wheel:

brainly.com/question/14040365

#SPJ4

failure of 'o-ring' seals led to the tragic explosion of the of the challenger space shuttlehallenger space shuttle

Answers

O-ring seal failure caused the fatal magnitude the of the An O-ring, a spherical gasket used to seal the right rocket booster, was found to be the primary culprit in the mishap.

What big was the Challenger's failed O-ring?

On the Challenger, the O-ring had a circumference of 12 feet. As the igniters ignite the fuel upon launch, there seems to be high pressure on the inside of the solid rocket boosters. The parts holding the O-ring flexed slightly as a result of the pressure.

Who of the following is best recognized for expressing grave worries about the O-ring months just before launch of the space shuttle Challenger?

He was required to appear before an executive panel, and when he did, he informed the commission's chairman, William Rogers, that Morton Thiokol had been so worried about the Aaaaa that they had advised NASA not to launch the spacecraft in conditions that were cooler than 53 degrees.

To know more about magnitude visit :

https://brainly.com/question/28173919

#SPJ4

A mass attached to a vertical spring causes the spring to stretch and the mass to move
downwards. What can you say about the spring’s potential energy (EPE) and the
gravitational potential energy (GPE) of the mass?
A) both EPE and GPE decrease
B) EPE increases and GPE decreases
C) both EPE and GPE increase
D) EPE decreases and GPE increases

Answers

The spring's elastic potential energy decreases and the gravitational potential energy increases.

What do you mean by potential energy?

Potential energy is the energy an object possesses because of its position or state. It is the energy an object has due to its height, position, or chemical composition. The unit of measurement for potential energy is usually Joules (J).

There are different types of potential energy, such as gravitational potential energy (GPE), elastic potential energy (EPE), and chemical potential energy.

When a mass is attached to a vertical spring, it causes the spring to stretch. As the spring stretches, it stores potential energy in the form of elastic potential energy (EPE). As the spring stretches, the potential energy stored in it increases.

At the same time, as the mass is attached to the spring and moves downward, it loses gravitational potential energy (GPE) due to the work done by gravity on the mass. Since the mass is moving downward, the gravitational force is acting in the opposite direction of the displacement, resulting in a decrease in GPE. Therefore, as the mass moves downward, the EPE of the spring increases and the GPE of the mass decreases.

Therefore, the spring's elastic potential energy decreases and the gravitational potential energy increases.

To learn more about potential energy from the given link:

https://brainly.com/question/24933254

#SPJ1

Other Questions
which clinical manifestations does the nurse identify as indicators suggesting a client has urinary retention and overflow after sustaining a cerbrovascular accident She is more intelligent than her brother change coparitive degre. What disease did Christopher Columbus' sailors bring to Europe after their voyage to America in the 1490's? (-6 , -6 ) and ( -9 , - 5 ) complete three repetitions of your simulation using the random digits below and use the results to estimate the probability described in part (c). A recent survey indicated that the mean time spent on a music streaming service is 210 minutes per week for the population of a certain country. A simulation was conducted to create a sampling distribution of the sample mean for a population with a mean of 210. The following histogram shows the results of the simulation.Which of the following would be the best reason why the simulation of the sampling distribution is not approximately normal?answer choicesThe samples were not selected at random.The sample size was not sufficiently large.The population distribution was approximately normal.The samples were selected without replacement.The sample means were less than the population mean. One month the actual unemployment rate in France was 13.4%. If during that month you took an SRS of 100 Frenchmen and constructed a confidence interval estimate of the unemployment rate, which of the following would have been true?A. The center of the interval was 13.4.B. The interval contained 13.4.C. A 99% confidence interval estimate contained 13.4.D. The z-score of 13.4 was between 2.576.E. None of the above are true statements.www.crackap.com---------------------Source Url:https://www.crackap.com/ap/statistics/question-606-answer-and-explanation.html The five major promotional tools (advertising, personal selling, sales promotion, social media, and public relations) are known collectively as the:a. communication model.b. advertising campaign.c. marketing mix.d. publicity four.e. promotional mix. What is the equation of the exponential graph below? How are Darwin's finches an example of natural selection?. What is the SI unit of linear momentum Mcq?. 3. What is implied by the statement "growth and development are predictable yet unique"? a. in the diagrams above, draw the production possibilities frontier for each country. instructions: use the tools provided 'ppfa' (for mexico) and 'ppfb' (for nicaragua) and plot only the endpoints such that the first point touches the vertical axis and the last point touches the horizontal axis (2 points for each graph). b. both countries want to consume 3 tons of chicken each year and as many vegetables as they can produce along with the 3 tons of chicken. find this point on each production possibilities frontier. instructions: use the tools provided 'pt 1' to plot the indicated points for each country (1 point for each graph). c. suppose the countries specialize. multiple choice mexico will produce chicken. nicaragua will produce chicken. d. once they specialize, suppose they work out a trade of 3 tons of chicken in exchange for 8 tons of vegetables. find the post-trade consumption point for each country. instructions: use the tools provided 'pt 2' to plot the indicated points for each country (1 point for each graph). e. after trade, mexico can consume 2 more tons of vegetables. after trade, nicaragua can consume 4 more tons of vegetables. Philosophy 203 how much importance do you think duty ought to have in relation to morality which of the following are examples of local laws in other countries and their associated penalties? (check all that apply.) A driver states that she was doing 80 when stopped by the police. What is the problem with this statement in terms of its clarity? the syllable level is where individual sounds are paired with a vowel. this level eases the transition from the isolation level to the ____ level. Based on this section of the reading, are humans more interested in cooperation or dominance? In the Lord of the Flies book chapter 4CFS:Claim is one on-topic, concise sentence that previews the evidence.2 pieces of evidence are concise, introduced with context, cited in APA, and support your claim with best evidence.Explanation is 1-2 sentences, includes a transitional phrase or paraphrase of the quote, and articulates why the evidence proves the claim.Link includes a transitional word or phrase (ex. Therefore) and uses fresh language. genotype-environment correlations occur because biological parents, who are genetically related to the child, provide a rearing environment for the child. multiple choice question. Suppose you want your audience to see how income per GDP for a set of countries has changed over thepast 50 years so you do a line graph.