For the following grammar given below, remove left recursion from it: S→ABC
A→Aa∣Ad∣b
B→Bd∣e
C→CC∣g
Given the following grammar S → ABC A → Aa | Ad | b B → Bd | e C → CC | g
We have to remove left recursion from the given grammar.
The given grammar has left recursion in the productions of A and C.
We will eliminate left recursion using the following process. A → Aa | Ad | b becomes
A → bA' A' → aA' | dA' | εC → CC | g
becomes C → gC' C' → CC' | ε
Let’s check if our grammar is correct.
S → ABC → bA'BC → bCgC'ABC → bCgABC → bCgCC'ABC → bCgCgABC → bCgCgBdABC → bCgCgBdeABC → bCgCgBde
The above grammar is now free from left recursion and can be used for further analysis. It can be represented in the following way:
S → ABC | bA'A' → aA' | dA' | εB → Bd | eC → CC' | gC' → CC' | ε
Note: While removing left recursion, the order of the non-terminals should be maintained.
To know more about grammar visit:
https://brainly.com/question/29582939
#SPJ11
9. Why are karyotypes useful diagrams? What can they show you about an organism? 10. Organisms have different numbers of chromosomes. Fill in the chart below about 5 different organisms. Species # of homologous # of chromosomes in # of chromosomes in diploid cells chromosome pairs in haploid cells diploid cells (2n) (n) Humans 46 23 pairs Bat 44 Monkey 21 pairs Camel 35 Dog 78 1 1. The number of chromosomes during meiosis is incredibly important. Why is that? Exercise 2.10.7: The Unit Circle In this program we are going to practice using the Math class by computing some important values on the unit circle. Using the angles 0, PI/2, and PI, print out the angle, the cosine of the angle, and the sine of the angle. Your output should look like this: Radians: (cos, sin) 0.0: 1.0, 0.0 1.5707963267948966: 0.0, 1.0 3.141592653589793: -1.0, 0.0 Hints: You'll need to use the Math.sin, Math.cos methods and the Math.PI constant! You can round a decimal to 2 decimal places by multiplying by 100, rounding to the nearest int using Math.round, and then dividing by 100. You will need to round the sine and cosine values. Here's an example: double angle = Math.PI/4; double cosine = Math.cos(angle); // 0.707106781 cosine = cosine * 100; // 70.7106781 cosine = Math.round(cosine); // 71.0 cosine = cosine / 100.0; // 0.71 // Or put it all on one line: cosine = Math.round(cosine * 100) / 100.0; Some Math Background The Java methods need the angles to be in radians, rather than degrees. PI/2 radians is equal to 90 degrees. PI radians is equal to 180 degrees. That's why we're using multiples of PI in this exercise. UnitCircle.java public class UnitCircle { public static void main(String[] args) { System.out.println("Radians: (cos, sin)"); // Put your code here! } }
Karyotypes show chromosomes, genetic abnormalities; meiosis is important for diversity and errors cause disorders.
Karyotypes are useful diagrams because they provide a visual representation of an organism's chromosomes. They show the number, size, and shape of chromosomes arranged in pairs according to their morphology. Karyotypes can be created using various techniques, such as staining and microscopic imaging.
Karyotypes provide important information about an organism's genetic composition. They can reveal the total number of chromosomes in a cell, the presence of any structural abnormalities or rearrangements, and the sex of an individual (in species with sex chromosomes). By analyzing karyotypes, scientists can identify chromosomal disorders, such as Down syndrome, Turner syndrome, or Klinefelter syndrome, as well as certain types of cancer-related chromosomal abnormalities.
Additionally, karyotypes can provide insights into evolutionary relationships and genetic diversity among different species. By comparing karyotypes across species, scientists can determine the similarities and differences in chromosome organization and identify evolutionary changes that have occurred over time.
Species Number of homologous chromosome pairs (2n) Number of chromosomes in haploid cells (n) Humans 23 pairs 46 23 Bat 22 pairs 44 Monkey 21 pairs 42 Camel 17 pairs 34 Dog 39 78 39
The number of chromosomes during meiosis is incredibly important because it determines how genetic material is divided and distributed to gametes (sex cells). Meiosis is a specialized cell division process that produces haploid cells (gametes) with half the number of chromosomes as the parent cell (diploid). During meiosis, homologous chromosomes pair up, exchange genetic material through recombination, and separate into different cells. This genetic shuffling and chromosome segregation during meiosis contribute to genetic diversity in offspring.
The correct number of chromosomes is crucial during meiosis to ensure the proper segregation of genetic material. Errors in chromosome number, such as nondisjunction, can lead to aneuploidy, where gametes or offspring have an abnormal number of chromosomes. Aneuploidy can result in developmental abnormalities, infertility, or genetic disorders, as observed in conditions like trisomy 21 (Down syndrome) or monosomy X (Turner syndrome).
Understanding the number and behavior of chromosomes during meiosis is vital for studying inheritance patterns, genetic disorders, and reproductive biology across different organisms.
learn more about Chromosomes and Meiosis.
brainly.com/question/31881886
#SPJ11
although the output resistance of most op amps is extremely low when negative feedback is used, a typical inexpensive op amp can supply only a maximum current of approximately 25 ma. calculate the maximum amplitude of a sinusoidal input (at low frequencies ~ 1
The maximum amplitude of a sinusoidal input can be calculated by dividing the maximum current that the op amp can supply by the output resistance.
In the given scenario, it is mentioned that the output resistance of most op amps is extremely low when negative feedback is used. However, an inexpensive op amp can only supply a maximum current of approximately 25 mA.
To calculate the maximum amplitude of a sinusoidal input, we need to divide this maximum current by the output resistance of the op amp. The output resistance represents the resistance seen by the load connected to the op amp's output.
By dividing the maximum current (25 mA) by the output resistance, we can determine the maximum amplitude of a sinusoidal input that the op amp can handle. This calculation provides an insight into the limitations of the op amp in terms of its current capability and helps ensure that the input signal stays within acceptable bounds.
Learn more amplitude
brainly.com/question/9525052
#SPJ11
Consider the Boolean expression
AB+A-B-
(a) Convert the expression to an equivalent expression using only the Boolean operator NAND.
(b) Diagram the circuit would realize (implement) the expression you just created.
(c) Which is better, the AND, OR, NOT version or the NAND version? Or is there no better of the two? Explain your answer.
When NAND gates are used, a minimal number of gates is used. In the circuit, NAND gates have a faster response than AND, OR gates. Therefore, the NAND version of the expression is better than the AND, OR, NOT version.
Given the Boolean expression is AB + A - B -We need to convert the given Boolean expression into an equivalent expression using only the Boolean operator NAND.(a) Conversion of the given expression AB + A - B - to an expression using NANDThe NAND is represented by a bar above the AND symbol. Using De Morgan's laws, AND and OR gates can be realized using the NAND gate.
NAND(x,y) = x⋅y + NAND(x,x) + NAND(y,y)
Using the above formula, we can convert the expression to its NAND form as follows:
AB + A - B -= NAND(NAND(A, NAND(A, B)), NAND(B, NAND(A, B)))
(b) Circuit realization of the NAND form of the given expression For the NAND form of the given Boolean expression AB + A - B -The circuit diagram realization for the NAND form of the expression is as shown below:
(c) Which is better, the AND, OR, NOT version or the NAND version? Or is there no better of the two? Explain your answer.The implementation of the circuit using the NAND gate is cheaper compared to the implementation using AND, OR, NOT gates.
To know more about expression visit:
https://brainly.com/question/28170201
#SPJ11
what is the maximum number of 4/0 awg thhn copper conductors permitted to be installed in a two-inch imc?
The maximum number of 4/0 AWG THHN copper conductors permitted to be installed in a two-inch IMC is twenty-four (24) wires.
The NEC sets the standards and requirements for electrical installations in the United States. The 4/0 AWG THHN copper conductor is frequently used in electrical installations because of its high ampacity and good electrical conductivity.
IMC (Intermediate Metal Conduit) is one type of metallic conduit that is usually used in electrical installations to offer mechanical protection for cables. The IMC is made of steel and coated with a zinc layer to protect against corrosion. The NEC mandates that the number of wires that can be installed in a conduit is determined by the diameter of the conduit and the cross-sectional area of the wires.
According to NEC Article 314.28, the maximum number of wires allowed in a conduit is based on the wire diameter and the conduit diameter.
In a two-inch IMC, the maximum number of 4/0 AWG THHN copper conductors that can be installed is 24 wires, which is the maximum allowable for that specific conduit size.
To know more about copper conductors visit :
https://brainly.com/question/32341230
#SPJ11
automated tools, frameworks, and processes for all stages of the data analytics process are part of the data engineer’s ecosystem. what role do data integration tools play in this ecosystem?
Data integration tools play a crucial role in the data engineer's ecosystem by facilitating the process of combining data from multiple sources into a unified and coherent format.
These tools are designed to streamline the data integration process, allowing data engineers to efficiently extract, transform, and load (ETL) data from various systems and prepare it for analysis.
One of the primary functions of data integration tools is to connect to different data sources, such as databases, data warehouses, cloud storage, or web services.
These tools provide connectors and adapters that enable seamless communication between disparate data systems, eliminating the need for manual data extraction and transformation.
Furthermore, data integration tools offer a range of transformation capabilities, including data cleansing, normalization, aggregation, and enrichment.
These transformations ensure that data is consistent, accurate, and in the desired format for analysis.
Additionally, data integration tools often provide scheduling and automation features, allowing data engineers to create and manage data integration workflows.
These workflows can be scheduled to run at specific intervals, ensuring that data is regularly refreshed and up-to-date for analytics purposes.
In summary, data integration tools streamline the process of collecting, combining, and preparing data from diverse sources, enabling data engineers to create a unified and consistent data environment for analysis.
By automating these tasks, these tools save time, reduce errors, and enhance the overall efficiency of the data analytics process.
For more such questions ecosystem,click on
https://brainly.com/question/30407878
#SPJ8
several luminaires are to be connected to a 12-volt lighting transformer (power supply). the luminaires draw a total of 23 amps. the circuit wiring is 68 feet of 2-conductor 12 awg mc cable. what is the voltage applied tothe luminaires? use k
The voltage applied to the luminaires is 276 volts.
How do we calculate the total resistance of the circuit wiring?To calculate the total resistance, we need to know the resistance per unit length of the 2-conductor 12 AWG MC cable. The resistance of a conductor can be determined using the formula R = ρ * (L / A), where R is resistance, ρ is resistivity, L is length, and A is cross-sectional area.
For 12 AWG MC cable, the resistivity (ρ) is a known constant. The length (L) of the cable is given as 68 feet. To find the cross-sectional area (A) of the cable, we can refer to a wire gauge table.
Once we have the resistance per unit length, we can multiply it by the total length of the circuit wiring (68 feet) to obtain the total resistance.
Learn more about: voltage applied
brainly.com/question/20815030
#SPJ11
What is really being outputted here? a=3 b=5.5 c=3.0 if (a>b) and (a==c): print("This is true.") else : print("This is false." ) a. This is false. b. Nothing c. False d. True e. This is true.
In this case, a = 3, b = 5.5 and c = 3.0.
Here is the given code snippet below:
if (a > b) and (a == c): print("This is true.") else:
print("This is false." )
In the first conditional statement, the value of a is compared with b to determine whether a is larger or not.
Since 3 is less than 5.5, the evaluation of the first condition is False.
Because the first condition is false, the entire if statement becomes False.
This implies that when we run the code, it will output False.T
he correct answer is "This is false." is outputted.
To know more about code visit:
https://brainly.com/question/15301012
#SPJ11
Unless installed parallel to framing members, NM wiring run in an attic accessed by a portable ladder shall be protected from damage where locating within _____ of the nearest edge of the attic entrance.
(a) 7 feet
(b) 6 feet
(c) 8 feet
(d) 10 feet
Unless installed parallel to framing members, NM wiring run in an attic accessed by a portable ladder shall be protected from damage where locating within 6 feet of the nearest edge of the attic entrance. Option (B) is correct.
When the portable ladder is used to gain access to an attic, the NM wiring in the attic must be protected from damage.
Unless parallel to framing members, NM wiring in an attic accessed by a portable ladder must be protected from damage when located within 6 feet of the nearest edge of the attic entrance. It's essential to ensure that the wiring does not fall into harm's way when using portable ladders to access attics.
Also, a portable ladder is a temporary ladder that can be quickly transported and installed to provide access to hard-to-reach areas.
Portable ladders come in a variety of sizes and styles, making them ideal for a variety of projects and applications. They may be made of aluminum, wood, or fiberglass and can hold varying amounts of weight depending on their design.
To know more about portable ladder visit :
https://brainly.com/question/28298385
#SPJ11
a vehicle is being aligned that has too much positive camber and too little positive caster on the left front wheel. The vehicle has an adjustable strut mount that allows for both caster and camber adjustment. In what direction should the mount be moved?
One of the direction the vehicle mount be moved is camber adjustment.
Direction calculation.
To correct the arrangement issue portrayed, where the vehicle has as well much positive camber and as well small positive caster on the cleared out front wheel, the flexible strut mount ought to be moved within the taking after directions:
Camber Adjustment: Since the vehicle has as well much positive camber (the beat of the wheel is tilted outward), the movable strut mount ought to be moved internal or towards the center of the vehicle. This alteration will offer assistance bring the best of the wheel closer to a vertical position, decreasing the positive camber.Caster Adjustment: As the vehicle has as well small positive caster (the controlling pivot is tilted in reverse), the movable strut mount ought to be moved forward or towards the front of the vehicle. This adjustment will increment the positive caster point, bringing the directing hub closer to a wanted position.By making these adjustments to the movable strut mount, the vehicle's camber and caster points can be rectified to the suitable details, guaranteeing appropriate arrangement and ideal taking care of characteristics. It's worth noticing that for precise adjustments and to attain the most excellent arrangement, it is prescribed allude to">to allude to a proficient technician or arrangement master who can perform the alterations precisely utilizing specialized hardware.
Learn more about direction below.
https://brainly.com/question/27854247
#SPJ4
3. 21 A three-phase load draws 120 kW at a power factor of 0. 85 lagging from a 40-V bus. In parallel with this load is a three-phase capacitor bank that is rated 50 VAR. Find (a) the total line current and (b) the resultant power factor
in oil-fired heating systems, fuel oil additives may be used to do all the following, except ____.
In oil-fired heating systems, fuel oil additives may be used to do all the following, except improve the odor.
What are fuel oil additives?Fuel oil additives are chemical substances that are added to fuel oil to improve the performance and reliability of fuel oil-fired boilers, furnaces, and other heating equipment.
These additives are classified into three categories: deposit control additives, stability improvers, and combustion improvers.
The addition of these chemical substances to fuel oil can help to reduce sediment and sludge buildup, prevent corrosion, and improve combustion efficiency.
Fuel oil additives can help extend the life of oil-fired heating systems, improve performance, and reduce maintenance costs.
They also help to reduce pollution by lowering emissions and improving air quality.In oil-fired heating systems, fuel oil additives may be used to do all the following, except improve the odor.
To know more about fuel oil visit :
https://brainly.com/question/15356734
#SPJ11
Using the table below, draw the network diagram and answer the questions. 1. How many paths are in the network, and what are they? (1 mark) 2. What is the critical path and its duration? (1 mark) 3. What is the float on activity U? (1 mark) 4. What is the impact to the project if activity B takes three weeks longer than planned? (1 mark) Activity Predecessor Estimate in Weeks Start - 0 C Start 6 B Start 4 P Start 3 A C,B,P 7 U P 4 T A 2 R A 3 N U 6 End T,R,N 9 Question 2 Your group was tasked to produce a research manual and listed the activities that must be completed, and the time estimates for each activity as shown in the table below: Note: You are required to use the last non-zero digit of your group leader’s student ID number for A,B,C,D,E. (where relevant based on your group size. Crash value cannot be ‘0’. Thus use the next bigger non zero digit from your ID number. Activity Immediate Predecessor Time (weeks) Cost (RM) Normal Crash Normal Crash A - a *a-1 700 800 B - 2 or b *b-1 1200 1900 C A 8 or c *c-2 1600 2200 D B 5 or d *d-2 1500 2300 E C 6 or e *e-2 2000 2800 F C,D 6 5 800 1200 G E,F 2 1 500 1000 (a) Draw a project network diagram. (1 mark) (b) Find the critical path.(1 mark) (c) What is the normal expected project completion time? (1 mark) (d) What is the total project cost using the normal time? (1 mark) (e) If the project is to be completed 2 weeks faster, determine which activities to crash at a minimum cost. What additional cost is incurred? What is the total cost? (3 marks) Question 3 Diddy Corp would like to develop an order quantity and reorder policy that would minimize their total costs of their inventory of printers. The probability distribution for demand for ace drill on a daily basis is shown below. Demand 0 1 2 3 4 5
The number of paths in the network is six.
The paths are:
C - A - T - N - EndC - A - T - R - N - EndC - B - P - U - N - EndC - B - P - U - T - R - N - EndC - B - P - A - T - N - EndC - B - P - A - T - R - N - End
2. The critical path is C - A - T - N - End with a duration of 24 weeks.
3. The float on activity U is 1 week.
4. If activity B takes three weeks longer than planned, it will affect the duration of path 3 and the entire project. It will elongate the project duration to 29 weeks.
2. b) The critical path is A-C-E-G with a duration of 18 weeks.
(c) The normal expected project completion time is 18 weeks.
(d) The total project cost using normal time is RM 7600.
(e) To complete the project two weeks faster, activities C and E can be crashed for the minimum cost.
The additional cost incurred will be RM 600.
The total cost is RM 8200.
3 The inventory cost that will minimize the total cost of inventory is obtained using the formula,
TAC = IC + OC + HCS
Where TAC
= Total Annual CostIC = Inventory CostOC = Ordering CostHCS = Holding and Carrying Cost.
The probability distribution is shown below. Demand 0 1 2 3 4 5Probability 0.20 0.15 0.25 0.20 0.10 0.10
To determine the optimal order quantity and reorder policy that would minimize total cost,
the EOQ (Economic Order Quantity) model will be used.
The EOQ can be determined using the formula,
Q = √((2DCO)/CH')
Where Q = Economic Order Quantity
D = Demand'
C0 = Cost per order
H = Holding cost
C = IC per unit
Let’s assume the cost per unit, C = RM 500,
the holding cost, H = 0.2,
and demand, D = 3 units per day.
Hence,CO = RM 800 (C0 = Cost per order, which is the same as ordering cost)
Then,Q = √((2 x 3 x RM 800)/RM 100)Q = 24 units per order
Then, the reorder level can be determined using the formula,
ROL = d * LWhere L = Lead time
ROL = 3 x 5 = 15 units
The total annual cost can be determined by substituting the values into the formula,
TAC = IC + OC + HCS
where IC = 0.5 x RM 500
= RM 250OC
= (365/EOQ) x C0OC
= (365/24) x RM 800OC
= RM 12133.33HCS
= (Q/2) x H x dHCS
= (24/2) x 0.2 x 3HCS
= RM 7.20
TAC = RM 250 + RM 12133.33 + RM 7.20TAC = RM 12390.53
Hence, the order quantity that will minimize the total cost of inventory is 24 units.
To know more about paths visit:
https://brainly.com/question/31522531
#SPJ11
Determining if brake fluid should be flushed can be done using which of the following methods?
A.
Test strip
B.
DVOM-galvanic reaction test
C.
Time and mileage
D.
All of the above
Determining if brake fluid should be flushed can be done using all of the above methods. The most effective way to check the need for a brake fluid flush is a DVOM-galvanic reaction test, test strips, time, and mileage.
A test strip or a simple test of boiling brake fluid in a jar is not enough for determining the need for a brake fluid flush.Time and MileageBrake fluid should be flushed every two years or 24,000 miles, whichever comes first. As the brake fluid absorbs water over time, it may become less effective and not perform as well as it should.
To maintain optimal performance, brake fluid should be flushed at the specified intervals. DVOM-Galvanic Reaction Test The DVOM-Galvanic Reaction Test is a method to test the brake fluid’s electrical conductivity and acidity. This test should be carried out by an experienced mechanic, and it is the most effective way to determine the need for a brake fluid flush. Test Strip The test strip is less effective than the DVOM-Galvanic Reaction Test.
It is used to determine the fluid’s boiling point, which can give an idea of the level of contamination present in the fluid. However, a boiling point test is not enough for determining the need for a brake fluid flush.
Therefore, all the above methods are used to determine the need for a brake fluid flush.
To know more about flushed visit:
https://brainly.com/question/12977992
#SPJ11
Highway safety engineer tests newly designed road signboards with the objective to increase the reflectivity so that the signboards will be more visible to drivers. Volunteers drive through a test course with new and old design signboards and they rate which design is more visible. Hypothesis testing is conducted and P-value of the difference between rate of visibility for new and old signboard sis found to be 0.04. i) Identify the possible parameter in the study. [1 Mark] ii) Is there enough evidence that the new improved design is helping in improving visibility? [5 Marks] iii) Identify the type of error in the study. Justify your answer. [2 Marks]
As 0.04 < 0.05, the null hypothesis can be rejected and the alternative hypothesis can be accepted.iii) Type of error in the study and its justification:Type I error is the incorrect rejection of a true null hypothesis, which is also known as a "false positive."
The answer to the given question is as follows:i) Possible parameter in the study:The possible parameter in the study is reflectivity.
ii) Is there enough evidence that the new improved design is helping in improving visibility?Yes, there is enough evidence that the new improved design is helping in improving visibility. P-value for the difference between rate of visibility for new and old signboards is found to be 0.04, which is less than 0.05.
As 0.04 < 0.05, the null hypothesis can be rejected and the alternative hypothesis can be accepted.iii) Type of error in the study and its justification:Type I error is the incorrect rejection of a true null hypothesis, which is also known as a "false positive."
In this study, a Type I error is possible. If the null hypothesis is true and there is no significant difference between the new and old signboard visibility, but we reject the null hypothesis in favor of the alternative hypothesis, it will result in a Type I error.
This means that we will conclude that the new signboard is better, even though there is no real difference between the two.
To know more about hypothesis visit :
https://brainly.com/question/14847724
#SPJ11
Design a Deterministic Finite State Machine to accept the language.
L = { w Î {0, 1}*: w ends with 101}
We will prove that the machine accepts w by demonstrating that it ends in state D when w is input. Because w ends with 101, it can be decomposed into three parts: w = xyz, where x and y are arbitrary (possibly empty) strings over {0,1}, and z = 101.
A deterministic finite state machine (DFSM) can be used to recognize the language L, which consists of all strings over the alphabet {0,1} that end with 101. The machine should have at least one accepting state, indicating that the input string is in the language.
For the language L, the following is the deterministic finite state machine (DFSM):The machine has four states, which are labeled A, B, C, and D. The machine starts in state A, which is the initial state. The machine accepts the input string if it ends in state D.
A transition from state A to state A is possible on input 0 or 1. A transition from state A to state B is possible only on input 1. A transition from state B to state B is possible on input 0 or 1. A transition from state B to state C is possible only on input 0. A transition from state C to state D is possible only on input 1. All other transitions are impossible.
We can now show that this machine accepts the language L.Let w be any string in L, so w ends with 101. We will prove that the machine accepts w by demonstrating that it ends in state D when w is input. Because w ends with 101, it can be decomposed into three parts: w = xyz, where x and y are arbitrary (possibly empty) strings over {0,1}, and z = 101.
The machine starts in state A. After reading x, it is still in state A. After reading y, it enters state B. After reading 10 (the first two digits of z), it is still in state B. Finally, after reading the digit 1, it enters state C.
After reading z, it is in state D, which is the accepting state. This completes the proof that the machine accepts w, so L is recognized by the machine. Provides the steps to design a deterministic finite state machine to accept the language L.
To know more about finite state visit :
https://brainly.com/question/32998825
#SPJ11
The mechanical drawing sheet identified by the letter _____ is 34" by 44".
a. A
b. B
c. D
d. E
The mechanical drawing sheet identified by the letter D is 34" by 44".The letter coding of drawing sheets is a standard used by architects, engineers, and designers to indicate the sizes and types of paper.
For the design and drafting of building plans, mechanical drawings, electrical schematics, and other technical drawings, different sizes and formats of paper are used. Different paper sizes are designated with letters, with each letter representing a specific size and format.
For instance, A size papers are the most widely used and most basic papers; B size papers are a little larger and provide more room for design and drafting work; C size papers are larger still, with D and E size papers providing the most space.In this case, the mechanical drawing sheet identified by the letter D is 34" by 44".
This is an exceptionally large size, and it is suitable for drawings and blueprints that require a lot of detail or are in large format. As an architect, engineer, or designer, it is important to understand the different paper sizes and their applications in order to produce accurate, detailed, and professional technical drawings.
To know more about identified visit:
https://brainly.com/question/9434770
#SPJ11
deliverables: you must use functions and classes to modularize your work. you should use exception handling where necessary as well. 50 points off for programs that crash on expected input. store and cart: in this assignment you will use classes and inheritance to create an application where user will input name and location of store and will start his/her grocery shopping by adding them to the cart. classes you will have to implement two classes with methods and attributes to finish up this program. the methods given here have to be implemented, however, you can add extra methods or attributes as needed. store the store class will include the following: - constructor - two instances attribute (name and location). - one setter method: to set the name and the location. - display method: to output all information from store class (the name and the location of the store).
To complete the assignment, modularize your code using functions and classes. Utilize exception handling and implement two classes: "Store" with a constructor, setter method, and display method. Test your program thoroughly to avoid crashes and deductions in points.
To complete this assignment, you will need to use functions and classes to modularize your work. Additionally, you should utilize exception handling where necessary to ensure that your program does not crash on expected input. Failure to do so will result in a deduction of 50 points.
The main goal of this assignment is to create an application where the user can input the name and location of a store and then start their grocery shopping by adding items to a cart. To accomplish this, you will need to implement two classes with methods and attributes.
The first class you will need to implement is the "Store" class. This class should have a constructor that initializes two instance attributes: "name" and "location". Additionally, you should include a setter method that allows you to set the name and location of the store.
Lastly, you will need to implement a "display" method in the Store class. This method should output all the information from the Store class, including the name and location of the store.
Here is a step-by-step breakdown of what you need to do:
1. Define the Store class with the following attributes:
- name
- location
2. Implement a constructor in the Store class that takes the name and location as parameters and assigns them to the corresponding attributes.
3. Implement a setter method in the Store class that allows you to set the name and location of the store.
4. Implement a display method in the Store class that outputs all the information from the Store class, including the name and location of the store.
Remember, you have the flexibility to add extra methods or attributes as needed to complete the program successfully. Make sure to test your program thoroughly to ensure it functions as expected and does not crash on expected input.
Learn more about code : brainly.com/question/28338824
#SPJ11
Consider a W12×79 tension member with end connections as shown below. Determine the member's available strength given 3/4 in. bolts at 3 in. on center. Assume adequate bolt strength. 2. Consider a W12×79 tension member with end connections as shown below. Determine the member's available strength given 3/4in. bolts at 3in. on center. Assume adequate bolt strength.
To determine the member's available strength, we need more information about the specific end connections and their design.
The provided description mentions a W12×79 tension member and end connections with 3/4 in. bolts at 3 in. on center, but without additional details, it is not possible to calculate the member's available strength accurately.
The available strength of a tension member depends on various factors, including the type and arrangement of the end connections, the load distribution, and the material properties. These factors need to be considered in the design and calculation of the member's strength.
If you provide more specific information about the end connections and their design, I can assist you in calculating the member's available strength.
Learn more about strength here
https://brainly.com/question/31719828
#SPJ11
1. Display all fields and all rows from titles 2. Display title and price from titles 3. Calculate the new price if all prices where cut 5% 4. Display all books that have a price of $20 5. Calculate the price if prices are cut by 5% for books costing more than $20 6. Display all books that have 'silicon' in the title 7. Display all books that don't have a price 8. Display all books that cost less than $15 and were published in 1995 9. Display all books that cost more than $10 and were published in the 1990s 10. Display the title of all books that were published more than 10 years ago
To perform various operations on the "titles" table, use SQL queries to select, update, and filter data based on specific conditions
The first step requires retrieving all fields and rows from the "titles" table, which can be achieved by using a simple SELECT statement without any conditions.
For the second step, you only need to display the "title" and "price" columns from the "titles" table. This can be done by specifying these two columns in the SELECT statement.
To calculate the new price after reducing all prices by 5%, an UPDATE statement is needed to modify the "price" column in the table. Each price value will be updated by multiplying it with 0.95.
The fourth step involves displaying all books with a price of $20. This can be accomplished by using a SELECT statement with a WHERE clause to filter the rows based on the price condition.
To calculate the price after reducing prices by 5% for books costing more than $20, an UPDATE statement with a WHERE clause is used to modify only the relevant rows.
The sixth step requires displaying all books that have the word "silicon" in the title. This can be achieved by using a SELECT statement with a WHERE clause and the LIKE operator to search for the desired text pattern.
Displaying all books without a price involves using a SELECT statement with a WHERE clause to filter rows where the price is NULL or empty.
To display all books costing less than $15 and published in 1995, a SELECT statement with a WHERE clause is used to specify both conditions.
The ninth step involves displaying all books costing more than $10 and published in the 1990s. This can be achieved by using a SELECT statement with a WHERE clause to specify the price and publication year range.
To display the titles of all books published more than 10 years ago, a SELECT statement with a WHERE clause and the DATEADD function is used to compare the publication date with the current date minus 10 years.
Learn more about SQL queries
brainly.com/question/31663300
#SPJ11
A ______ is a document that details various aspects of a building before an incident occurs.
A pre-incident plan is a document that outlines various aspects of a building before an incident occurs. The document may include key information such as the location of fire hydrants, gas and electric shut-off valves,
building access points, and other critical details that first responders may need to know in case of an emergency.
The purpose of a pre-incident plan is to provide critical information that can help emergency responders to respond to an incident safely and efficiently. The plan typically includes the building's physical layout, fire protection systems, hazardous materials storage, and other relevant information.
Pre-incident plans are often created for commercial and industrial buildings where the risk of an emergency is high. However, they can be created for any building, including residential homes. Pre-incident plans can be used by first responders to develop an effective emergency response plan, which includes evacuation procedures, rescue operations, and fire suppression techniques.
Having a pre-incident plan can help to reduce the risk of injury and loss of life in the event of an emergency.By having pre-incident plans, it is easier to identify the hazard and risks associated with the building. It allows emergency responders to access information related to the building that can save time and possibly lives during an emergency response.
To know more about various visit:
https://brainly.com/question/30929638
#SPJ11
g 3.3.0 bicylooctanebased on your current knowledge of three dimensional structure and strain which do you think is more strained trans or cis
The trans isomer of bicyclooctane is more strained than the cis isomer.
Why is the trans isomer of bicyclooctane more strained than the cis isomer?The strain in bicyclooctane arises from the steric interactions between the hydrogens on the bridgehead carbons. In the cis isomer, the hydrogens on the bridgehead carbons are oriented away from each other, resulting in less steric strain. However, in the trans isomer, the hydrogens on the bridgehead carbons are oriented towards each other, leading to significant steric strain.
The strain in the trans isomer of bicyclooctane can be understood by considering the angle strain and torsional strain. Angle strain arises from the deviation of bond angles from their ideal values, while torsional strain results from the eclipsing of bonds. The trans isomer has greater torsional strain and angle strain compared to the cis isomer. The presence of these strains destabilizes the molecule, making the trans isomer more strained.
Learn more about cis isomer
brainly.com/question/30640902
#SPJ11
\section*{Problem 2}
Use De Morgan's law for quantified statements and the laws of propositional logic to show the following equivalences:\\
\begin{enumerate}[label=(\alph*)]
\item $\neg \forall x \, \left(P(x) \land \neg Q(x) \right)\; \equiv \; \exists x \, \left(\neg P(x) \lor Q(x) \right)$\\\\
%Enter your answer below this comment line.
\\\\
\item $\neg \forall x \, \left(\neg P(x) \to Q(x) \right)\; \equiv \; \exists x \, \left(\neg P(x) \land \neg Q(x) \right)$\\\\
%Enter your answer below this comment line.
\\\\
\item $\neg \exists x \, \big(\neg P(x) \lor \left(Q(x) \land \neg R(x) \right)\big)\; \equiv \; \forall x \,\big( P(x) \land \left( \neg Q(x) \lor R(x) \right)\big)$\\\\
%Enter your answer below this comment line.
\\\\
\end{enumerate}
The last step follows from the double negation law:
$\neg\neg P(x)\equiv P(x)$ for any statement $P(x)$.
We can begin by writing the negation of the right-hand side of the required equivalence. [tex]\begin{align*}\neg\exists x\,\left(\neg P(x)\lor Q(x)\right)&\equiv \forall x\,\neg\left(\neg P(x)\lor[/tex]
[tex]Q(x)\right)\\&\equiv\forall x\,\left(\neg\neg P(x)\land\neg Q(x)\right)\\&\equiv\f[/tex]orall x\,\left(P(x)\land\neg Q(x)\right)\end{align*}
Thus, \begin{align*}\neg\forall x\,\left(P(x)\land\neg Q(x)\right)&\equiv\neg\left(P(1)\land\neg Q(1)\land\cdots\land P(n)
By De Morgan's laws, \begin{align*}
\neg\forall x\,\left(\neg P(x)\to Q(x)\right)&\equiv \exists x\,\neg\left(\neg P(x)\to Q(x)\right)\\&\equiv \exists x\,\neg\left(P(x)c
\equiv \forall x\,\left(P(x)\land\left(\neg Q(x)\lor R(x)\right)\right)\end{align*}
To know more about land visit:
https://brainly.com/question/28311828
#SPJ11
What is the result of the following Boolean expression, if x equals 3, y equals 5, and cequals 8?
<< y and z > x A) false B) 5 C) 8 D) true
The result of the given Boolean expression, with x = 3, y = 5, and c = 8, is false.
What is the evaluation of the expression "y and z > x"?To evaluate the expression "y and z > x", we need to substitute the given values into the expression. However, it seems that the variable z is not provided in the question, so we cannot determine its value. Therefore, we cannot accurately evaluate the expression.
Learn more about expression
brainly.com/question/28170201
#SPJ11
to be considered a complete warm up cycle, the engine must reach a temperature of
To be considered a complete warm-up cycle, the engine must reach a temperature that is optimal for its efficient and safe operation.
The specific temperature required for a complete warm-up cycle may vary depending on the engine type, fuel used, and other factors. Generally, the engine should reach its normal operating temperature, which is typically around 195-220 degrees Fahrenheit (90-105 degrees Celsius) for most gasoline-powered vehicles. This temperature allows the engine to operate efficiently, burn fuel effectively, and minimize wear and tear on engine components. However, it's important to consult the manufacturer's guidelines or the vehicle's owner's manual for the recommended warm-up temperature specific to your engine model.
Learn more about temperature here
https://brainly.com/question/7510619
#SPJ11
Which of the following are advantages of implementing cloud computing over services hosted internally? (Select THREE.) a. Rapid elasticity b. On-demand services c. Metered services d. Extensive technical configuration e. On-site servers f. No Internet connection required The accounting department has implemented thin clients and VDI. One of the users is complaining that each time she powers on her thin client, she has access only to a web browser. Which of the following is the most likely reason for this behavior? (Select TWO.) a. The user has been assigned a nonpersistent VDI account. b. The user has not signed in to the VDI server with her user account and password. c. The user has been assigned a persistent VDI account. d. The user has entered incorrect credentials to the VDI server. e. The user's thin client does not have an operating system configured.
Q1. The advantages of implementing cloud computing over services hosted internally are 1. Rapid elasticity. 2. On-demand services. 3. Metered services. Options A, B, and C. Q2. The user has not signed in to the VDI server. The user's thin client does not have an operating system configured. Options C and E.
The advantages of implementing cloud computing over services hosted internally are:
1. Rapid elasticity: Cloud computing allows for quick scalability, allowing businesses to easily increase or decrease their resources based on demand. This means that organizations can quickly adapt to changing needs without having to invest in additional infrastructure.
2. On-demand services: With cloud computing, users can access services and resources whenever they need them. This flexibility allows for more efficient resource allocation and can lead to cost savings by only paying for what is actually used.
3. Metered services: Cloud computing often offers a pay-per-use model, where users are billed based on the amount of resources they consume. This allows for better cost control and resource optimization, as organizations only pay for the exact amount of resources they need.
In the case of the user complaining about only having access to a web browser on her thin client after powering it on, the most likely reason for this behavior would be:
1. The user has not signed in to the VDI server with her user account and password. In order to access the full range of services and applications available on the thin client, the user needs to authenticate herself by signing in to the VDI server. This ensures that she has the necessary permissions to access all the resources assigned to her account.
2. The user's thin client does not have an operating system configured. Without a properly configured operating system, the thin client may only be able to provide basic web browsing functionality. To access additional applications and services, the thin client needs to have a fully functional operating system installed.
It's important to note that the other options mentioned in the question, such as nonpersistent or persistent VDI accounts, or incorrect credentials, may also cause issues with accessing services on the thin client. However, based on the information provided, the most likely reasons are the ones explained above.
Hence, the right answer is Options A, B, and C. Q2 and Options C and E.
Read more about Cloud Computing at https://brainly.com/question/32971744
#SPJ11
Which of the following is a reason that diesel engines should not be idled unnecessarily?
A.May interfere with communications systems
B.May cause hearing damage to those in the cab
C.May cause damage to internal engine components and emission systems
D.May cause the electrical system components to turn on and off intermittently
The reason that diesel engines should not be idled unnecessarily. It may cause damage to internal engine components and emission systems.The correct answer is option C.
The reason that diesel engines should not be idled unnecessarily is that it may cause damage to internal engine components and emission systems.Idling refers to the operation of an engine when the vehicle is stationary and the engine is running.
Idling wastes fuel and pollutes the air, and it can harm engine components and other parts of the vehicle over time. So, it is important to avoid unnecessary idling, particularly for diesel engines, because it can cause harm to engine components and emission systems.
During idling, the engine is operating at a low RPM and the engine's temperature is low, which can cause incomplete combustion of fuel, leading to the formation of carbon deposits and soot in the engine components and emission systems.
This, in turn, can cause wear and tear on the engine and the emission systems, reducing their efficiency and lifespan.Therefore, option C is the correct answer that explains
For more such questions engines,Click on
https://brainly.com/question/29496344
#SPJ8
g an ideal three phase voltage source supplies power s to two three phase parallel loads through a three phase line of impedenace z per phase. load 1 is balanced y connected load of impedance z1 load 2 is blanaced
The power supplied by an ideal three-phase voltage source to two parallel loads is influenced by the impedance of the three-phase line and the characteristics of the individual loads.
How does the impedance of the three-phase line affect the power supplied to the loads?The impedance of the three-phase line, denoted as "z" per phase, introduces a voltage drop and affects the power supplied to the loads. The impedance causes a voltage decrease as the current flows through the line. This voltage drop reduces the available voltage at the loads, consequently affecting the power delivered to them. The magnitude of the voltage drop depends on the impedance value and the current flowing through the line.
Learn more about impedance
brainly.com/question/30475674
Tag: #SPJ11
A set of function and call programs that allow clients and servers to
intercommunicate is a(n) ________ interface.
A) SQL B) relational database
C) middleware D) application programming
A set of function and call programs that allow clients and servers to
intercommunicate is a(n) middleware interface. so the correct option is c.
Middleware refers to a set of function and call programs that enable communication between clients and servers. It acts as an intermediary layer, facilitating interactions and data exchange between different applications and systems.
Middleware plays a crucial role in connecting various components of a computing system, allowing them to work together seamlessly. It abstracts the complexities of underlying systems, providing a standardized interface for communication.
In conclusion, middleware serves as a bridge between clients and servers, enabling intercommunication and facilitating the exchange of data and services. It plays a vital role in integrating different software components and systems, ultimately enhancing the interoperability and efficiency of an overall computing environment.
You can learn more about intercommunication between clients and servers at
https://brainly.com/question/29894454
#SPJ11
in migrationist and diffusionist explanations of the past, a "people" is defined as
In migrationist and diffusionist explanations of the past, a "people" is defined as a group of individuals who share a common cultural heritage, ancestry, language, or geographic origin.What is migrationism?Migrationism refers to a school of thought that asserts that cultural and technological progress are propelled by the migration of people and ideas.
When people migrate to new locations, they bring their culture and knowledge with them, allowing it to spread to new areas. Migrationism is linked to the concept of cultural diffusion, which refers to the spread of cultural elements, including religious and artistic ideas, from one culture to another.Migrationists believe that human civilization is constantly changing, evolving, and developing, with new ideas and innovations emerging as a result of human movement and interaction. This perspective acknowledges that societies are often formed and modified by external influences, including the migration of people from other cultures and geographic regions.
\What is diffusionism?Diffusionism, also known as cultural diffusionism, is the view that cultural elements, including religious and artistic ideas, originate from a single source and then spread to other cultures, often through trade, migration, and other forms of contact. According to diffusionism, all cultures can trace their origins back to a few ancient civilizations, such as those of Egypt, Greece, or China.Diffusionism was popular in the early twentieth century, particularly among anthropologists and archaeologists. However, its simplistic explanations for the origin and spread of cultural elements have been widely criticized.
To know more about language visit:
https://brainly.com/question/32089705
#SPJ11
