Assembly is essentially binary code written in a way that people can read it. The assembler then converts the assembly code, line by line, to the corresponding bit code.
What is the difference between Assembly and binary?In essence, assembly is binary code that has been translated into a language that people can read. Then, the assembler takes the assembly code and converts it bit-by-bit to the corresponding bit code.Imagine that there is a table with a line for each potential assembly statement. The statement itself is next on each line, followed by the corresponding bits that the computer can understand on the right.Even so, assemblers also have supplementary features like macros and other features, but the aforementioned functionality is their primary functionality.Binary is just a numbering scheme to programmers. For instance, base2 contains some 0s and 1s. These binary numbers are used by all computers. They interpret the instructions as a list of these numbers. They are not affected by the human-generated code, which is typically produced using a high-level programming language like Python, Java, and others.It is obvious that machine instructions in computers are not really human-readable - most people cannot determine the operational difference between 100010001... and 010001000... by simply looking at a binary or hex representation of the instruction bytes. Simply put, these instructions are machine codes.For instance, in the x86-16 architecture, the following instruction is used as the machine code for loading a value into a register: With a 2-bit addressing mode field and a 3-bit base register, the formula 8B 0E 34 12 denotes mov r16, r/m16, and which register the destination is (in this case, CX). For the avoidance of doubt, the Machine Code is represented using HEX code. Actually, it is simple to translate it to binary, and you have already mentioned that it is "10001011000011100011010000010010. Just like a string of ASCII 0 and 1 but more condensed, HEX is a text serialization format for binary numbers.Such binray/HEX instructions are readable by humans thanks to assembly, which is a higher level programming language than machine code. Using the machine code 8B 0E 34 12 as an example, MOV CX, [1234H] would be the result of decoding and disassembling the code.To Learn more about Assembly refer to:
https://brainly.com/question/1285060
#SPJ9
In the mesh created, you should have 1000 elements and 1111 nodes. How many values will Fluent have to determine directly by solving a system of algebraic equations? Please input answers as an integer (eg. 1, or 80, or 150, etc.)
The number of values that the Fluent will have when 1000 elements and 1111 nodes are created is 20
What will the number of values be?Number of elements along x direction is m and along y direction is n.
So, m × n = 1000 ( Elements)
And m × n + m + n + 1 = 1111 (Nodes)
Or, m + n = 1000
If m = 100 then n = 10. These values satisfy both the equations.
Now, for each element there will be one velocity component, pressure or temperature. So, 1000 algebraic simultaneous equations will be there for each case.
Learn more about node on:
https://brainly.com/question/28064122
#SPJ1
determine the tension in cable bd. (you must provide an answer before moving to the next part.) the tension in cable bd is
The tension in cable bd is = 357.807 N.
Moreover, Tension is the force exerted by a rope, string, cable, or similar object on one or more objects. Anything pulled, suspended, supported, or swung from a rope, string, cable, etc. is subject to a tensile force. Like all forces, tension can accelerate objects or cause them to deform.
The tension formula is formulated as. T = mg + ma. Where, T = tension (N or kg-m/s2) g = gravitational acceleration (9.8 m/s2)
You can learn more about this at:
https://brainly.com/question/29296746#SPJ4
14. when the rotor of a three-phase induction motor is blocked, its rotor frequency will be: a. zero
when the rotor of a three-phase induction motor is blocked, its rotor frequency will be same as the supplied frequency.
What is induction motors?An induction motor, also known as an asynchronous motor, is an AC electric motor in which the magnetic field of the stator winding is used to electromagnetically induct the electric current into the rotor necessary to produce torque.Therefore, it is possible to construct an induction motor without electrical connections to the rotor.When a load needs to be controlled in speed, they are used.Induction motors with wound rotors or slip rings are frequently used in conveyors, elevators, cranes, plunger pumps, crushers, and compressors.To learn more about Induction motor refer,
https://brainly.com/question/28852537
#SPJ4
what is the correct term for a flue stack when it is constructed as a part of the building or as a freestanding structure?
An example of a chimney is a flue-gas stack, which is often referred to as a smoke stack, chimney stack, or simply a stack.
Where on the chimney is the stack located?The brick or stone portion of a chimney that is located above a building's roof is called a chimney stack.The stack is the protruding portion, while the chimney is the entire structure (above the roof, usually).A chimney is a type of architectural ventilation system built of masonry, clay, or metal that separates hot, hazardous exhaust gases or smoke from places where people live. These gases or smoke are produced by a boiler, stove, furnace, fireplace, or other similar device.An example of a chimney is a flue-gas stack, which is often referred to as a smoke stack, chimney stack, or simply a stack.To learn more about Flue-gas stack refer to:
https://brainly.com/question/14267549
#SPJ4
in which type of situation would firefighters use a bill of lading or manifest to determine what type of flammable material is involved?
In the event of a bulk shipping fire, firefighters would consult a manifest or bill of
What does bulk transportation entail?(bulk traenspt) Noun. The movement of massive amounts of cargo or goods through rail, ship, or truck. However, most cells do have some sort of bulk transport system. These methods enable cells to selectively "grab" particular particles out of the extracellular fluid, take up nutrients from the environment, or release signaling chemicals to interact with nearby cells. Vesicles, which you might imagine as tiny membrane sacs that can fuse with the cell membrane, are used to transport larger substances or huge packages of small molecules through the cell membrane, also known as the plasma membrane, during bulk transport. A lipid bilayer makes up cell membranes.
To learn more about bulk transportation refer to
https://brainly.com/question/21468592
#SPJ4
A cylinder with a movable piston contains a sample of gas having a volume of 6. 0 liters at 293 k and 1. 0 atmosphere. What is the volume of the sample after the gas is heated to 303 k, while the pressure is held at 1. 0 atmosphere?.
After the gas is heated to 303 K, the sample's volume is 6.2 L.
Option (2) 6.2 L is the right response to the query.
From the aforementioned query, the following information was discovered:
6 L is the initial volume (V1).
(T1) The starting temperature is 293 K.
303 K is the final temperature (T2).
constant pressure
Complete volume (V2) =?
The final gas volume can be calculated using the Charles' law equation as follows:
Cross multiply 6 x 303 x 293 x V2 x 293 x V2 = 1818
293 V2 divided by both sides equals 6.2 L.
As a result, when the gas is heated to 303 K, the sample's volume is 6.2 L.
Option (2) 6.2 L is the right response to the query.
Learn more about heat here-
https://brainly.com/question/13155544
#SPJ4
Solve: cosine (x + pi) = one-half over the interval left-bracket startfraction pi over 2 endfraction, pi right-bracket. Startfraction pi over 2 endfraction startfraction 2 pi over 3 endfraction startfraction 3 pi over 4 endfraction startfraction 5 pi over 6 endfraction.
Answer:
2pi/3 - edge
Explanation:
trust
Answer:
2pi/3
Explanation:
(fill in the blank) is the process of designing a product for efficient production at the highest level of quality.
DFM is the process of designing a product for efficient production at the highest level of quality.
What is DFM explain?Design for Manufacturing (DFM) is the practice of creating parts, components, or entire products with the intention of constructing them more easily and at a reduced cost. By streamlining, improving, and perfecting the product design, this is accomplished.The process of designing a product for the most effective production at the greatest degree of quality is known as DFM. Designing for the Environment (DfE) refers to the explicit consideration of environmental issues throughout the design of products, services, and processes, and includes techniques like designing for recycling and disassembly.Designing for vertical assembly, in which components are put together straight down, is an illustration of the Design for Manufacturing principle.To learn more about DFM refer to:
https://brainly.com/question/28499698
#SPJ4
a centrifugal pump with a 6-in diameter impeller has the performance characteristics shown below when operating at 3500 rpm. if the pump speed is reduced by 20% while continuing to operate at peak efficiency, what are the new operating conditions for flow [gpm] and head [ft]?
A centrifugal pump's capacity for producing head is directly correlated with the impeller's diameter.
The Callisto module Voicemail is a modern, secure, and flexible voicemail system that offers a variety of choices for application, setup, notification, administration, and interception. To determine the impeller's diameter, stretch the tape measure across its center and align it with the very tip of the blade right across from the first blade. Two important factors that affect the centrifugal pump's performance are the flow rate and the pump head. The stability of centrifugal pump operation and the range of flow regulation are directly impacted by the shape of the H-Q curves. Additionally, a speed-based variable torque value is required for this pump.
Learn more about torque here
https://brainly.com/question/28988558
#SPJ4
water flows in a pipeline composed of 75-mm and 150-mm pipe. calculate the mean velocity in the 75-mm pipe when that in the 150-mm pipe is 2:5 m
which component in a truck cooling system requires that the coolant has some lubricating properties?
Answer:
The internal combustion engine has explosions inside of it regularly. Think about when you’re stepping on the gas pedal to accelerate quickly. How is the engine creating all that power for your vehicle to move faster?
There are an estimated 4,000 explosions taking place inside your engine every minute if you have a 4-cylinder engine and traveling at 50 mph. This is the process where the air and fuel mixture is ignited by the spark plugs to generate the power needed to move the wheels underneath your vehicle.
When you have so many explosions taking place this quickly, there is a lot of heat generated in the engine. These high temperatures could permanently damage the engine within minutes. The only thing which stops this from happening is the car’s cooling system.
The cooling system lowers the temperatures in the engine so that it doesn’t suffer any damage. Instead, it keeps the engine cooled enough to where it can keep operating smoothly.
Do not confuse the cooling system with the air conditioner because they’re actually two different systems in the car. The cooling system focuses specifically on cooling the engine, while the air conditioner focuses on cooling the people inside the vehicle.
If you had to choose which one was more important, then it would have to be the cooling system. You could possibly survive without air conditioning, but you cannot survive with a cooling system for your engine. If your cooling system doesn’t work, then your engine will die quickly.
quizzlet you are on a two-way street, stopped at an intersection. can you legally turn left on a red light into a one-way street?
Unless prohibited, you can legally turn left on a red light into a one-way street if traffic allows.
State some traffic rules?
Always use a seatbelt.Avoid distractions.Do not exceed the speed limit.Regularly service your car.Follow traffic signals.Maintain lane discipline.Be cautious in inclement weather.Maintain a safe distance.Slow down at road junctions, intersections, pedestrian crossings, and road corners, and wait until you are certain of a clear path ahead. If you are approaching the main road where traffic is not controlled, give way to vehicles passing on your right. Hand signals are required at times. These are some of the traffic rules.
Hence we can say that Unless prohibited, you can legally turn left on a red light into a one-way street if traffic allows.
To know more on traffic rules please find the link below:
https://brainly.com/question/24887597
#SPJ1
In order to test the reverse route back towards the original host, which of the following will you use? A Standard ping B Extended ping С Extended route O D Standard traceroute
The function that you will use in order to test the reverse route back toward the original host is known as Extended ping. Thus, the correct option for this question is B.
What is Ping and traceroute for?Ping and traceroute are the common commands you can effectively utilize in order to troubleshoot network problems. Ping is a simple command that can typically test the reachability of a device on the network. While traceroute is a command you use to 'trace' the route that a packet takes when traveling to its destination.
Extended ping permits a router's ping command to use The router's LAN IP address from within the subnet, fully testing the route back to the subnet. A standard ping often does not test the reverse route that you need to back toward the original host.
Therefore, the function that you will use in order to test the reverse route back toward the original host is known as Extended ping. Thus, the correct option for this question is B.
To learn more about Ping and traceroute, refer to the link:
https://brainly.com/question/28333920
#SPJ1
tech a says that semi-floating wrist pins can be pressed into the rods. tech b says that a rod heater can be used to install semi-floating wrist pins. who is correct?
The correct answer is both the tech are right that a rod heater can be used to install semi-floating wrist pins and semi-floating wrist pins can be pressed into the rods.
After some kind of friction secures the pin to the connecting, the piston can freely pivot inside the bosses of the piston pin. The most common method of attaching the semi-floating wrist pins to the rod is by press-fitting. The little end of the connecting rod is heated, which expands the metal and the diameter of the hole.If you're using high-level forced induction, nitrous oxide injection, high rpm or heavy sustained loading on your performance engine, upgraded semi-floating wrist pins represent the insurance deal of the century. Wall thickness is a critical factor based on application.
To learn more about semi-floating wrist pins click the link below:
brainly.com/question/24887891
#SPJ4
after installation of a rebuilt hydraulic hand pump, it is found that the handle cannot be moved in the pumping direction (pressure stroke). the most likely cause is an incorrectly installed
The most likely cause is an incorrect installation is Hand pump out-port check valve
What is a hydraulic hand pump?Hydraulic hand pumps combine pressure and flow to produce hydraulic energy, using human effort as the input. Under the straightforward premise that the handle gives an internal piston leverage, hydraulic fluid is provided under pressure that is directly applied from manual effort. The cylinder port is then forced to receive hydraulic fluid by the piston. The most typical fluids are water and hydraulic fluid, however other pressure media may also be utilized.The pressure created by the hydraulic energy is used to test, modify, and calibrate various measuring tools and instruments. When a precise level of tuning is demanded by the user, hydraulic hand pumps are frequently used to load and test machinery components. They are also utilized in lifting and lowering big things with materials handling equipment, which similarly calls for precise control over the objects' movements.
To learn more about hydraulic hand pump, refer to
https://brainly.com/question/13258111
#SPJ4
find the design stage uncertainty in the measurement when measuring a relatively higher pressure of 303 kpa
Uncertainty analysis at the design stage refers to a preliminary analysis carried out before the measurement.
Explain about the design stage uncertainty?
The causes of error that affect a measurement cannot be provided by design stage uncertainty analysis, but it can provide information and evaluate methods for instrument selection.
The precision and accuracy of the measuring device, as well as any other elements that can impair the experimenter's capacity to make the measurement, serve to restrict the uncertainty of a single measurement, and it is the experimenter's responsibility to calculate the uncertainty.
Zero-Order Uncertainty is a prediction of the anticipated uncertainty resulting from reading the data (interpretation error or quantization error). This fault is thought to be smaller than the instrumentation error.
To learn more about design stage uncertainty refer to:
https://brainly.com/question/16231258
#SPJ4
the tank is to be attached at the top using 4 mm diameter steel bolts. what is the minimum number of bolts needed if the tensile stress in each bolt is not to exceed 40 mpa
Bolts are placed around the pressure vessel's perimeter in a circle with a diameter of Dcircle = 800 mm. The bolts can withstand 245 MPa of tension stress.
It is difficult to distinguish between a bolt and a screw. According to Machinery's Handbook, the academic distinction lies in their intended design: bolts are made to fit through an unthreaded hole in a component and secure it with the help of a nut, though they can also be used to tighten into threaded components like screw or tapped housings without a nut.
In contrast, screws are used in components that already have an internal thread or to create an internal thread within them. The terms screw and bolt are frequently used by different people, so this definition permits ambiguity in the description of a fastener depending on the application it is actually used for.
To know more about bolts click here:
https://brainly.com/question/3163074
#SPJ4
A grocery store is expressing security and reliability concerns regarding the on-site backup strategy currently being performed by locally attached disks. The main concerns are the physical security of the backup media and the durability of the data stored on these devices Which of the following is a cost-effective approach to address these concerns?
A. Enhance resiliency by adding a hardware RAID.
B. Move data to a tape library and store the tapes off site
C. Install a local network-attached storage.
D. Migrate to a cloud backup solution
Please also explain why not other options
The option that is a cost-effective approach to address these concerns is option D. Migrate to a cloud backup solution
What is backup to the cloud?A service known as cloud backup backs up and stores the information and programs on a company's servers on a different server. When a system fails, there is an outage, or a natural disaster strikes, businesses choose to back up to the cloud to keep their files and data accessible.
There are different kinds of cloud backup services: you can set up an on-premises backup to save data to the cloud, use a dedicated cloud backup provider, backup data directly in the public cloud, backup data from one cloud to another, or backup data from one cloud to another.
Therefore, The reason why it is not the others is that the cost of backing up using the other options will be more expensive and also needs a lot of space and as such, cloud service is the best.
Learn more about cloud backup solution from
https://brainly.com/question/29453587
#SPJ1
a floor can be dented by the application of too much stress. who is more likely to dent your floor: a 50 kg woman in high-heeled shoes (assume a 6.0-mm-diameter heel) standing on one heel or a 5000 kg african elephant (40-cm-diameter foot pads) standing on all four legs?
The correct answer will be: (A) 24955495.07 N/m² (B) 97482.40 N/m². Assuming the high heels carry half of the body weight, each high heel bears a quarter of the weight.
This demonstrates that the stress under the heels of high-heel shoes is roughly 60 times greater than that under flat shoes. A normal adult elephant weighs around 5000 kg and has feet that are around in area. The pressure an elephant's foot puts on the ground is significantly less than what high heel shoes put on the ground.
The values are as follows:
mass,
m = 50 kg
diameter
= 0.50 cm
then,
radius,
r = 0.25 cm
= 0.0025 m
Learn more about pressure here-
https://brainly.com/question/16889220
#SPJ4
specify a quench rate necessary to ensure a hardness of at least rockwell c40 in a 4140 steel. (b) specify a quench rate necessary to ensure a hardness of no more than rockwell c40 in the same alloy
Water cooling was used to accomplish the greatest quenching rate (58.9 °C/s), and cooling air was used to control temperature and pressure for the remaining rates.
During solution treatment, the quenching rate of Al-Mg-Si alloys is a crucial metric for the automobile industry. Al-Mg-Si sheets' microstructures, mechanical characteristics, and response to paint bake-hardening were examined in this work in relation to various quenching rates. When a sample is quenched at a rate of 0.01 °C/s, large dimples appear on the fracture surface.
The dimples shrank when the quenching rate was raised to 58.9 °C/s. Quenching speeds greater than 1.9 °C/s had a slight impact on the recrystallized grains and texturing. As a result, samples with higher r values were obtained with slower quenching rates. Furthermore, in samples with a quick quenching rate, only the Al(FeMn)SiCr insoluble phases were seen. The precipitation kinetics improved due to sufficient solute atoms and vacancies.
To know more about quenching rate click here:
https://brainly.com/question/15708073
#SPJ4
a steel is known to contain 93.8 wt% fe, 6.0 wt% ni, and 0.2 wt% c. (a) what is the approximate eutectoid temperature of this alloy?
The eutectoid temperature of this alloy at 6.1 weight percent is approximately 650°C or 1,200°F.
What is meant by eutectoid point?a spot on a phase diagram that shows an alloy's eutectoid composition and eutectoid temperature.Additionally, the eutectoid point identifies the spot where three solid phases coexist. This point implies a temperature of 1333 F and a carbon concentration of 0.8% in the iron-carbon phase diagram.when a single solid phase separates into two distinct solid phases as it cools.At a specific temperature and composition, eutectoid transformations occur and typically result in a unique structure.Information given:
93.8 wt% Fe, 6.0 wt% Ni, and 0.2 wt% C make up the steel alloy.
Additionally, we also presum that Ni has been added but that the limits of positions with other phases have not changed.
According to the information above, the eutectoid temperature of this alloy at 6.1 weight percent is approximately 650°C or 1,200°F.
To learn more about Eutectoid temperature refer,
https://brainly.com/question/27433512
#SPJ4
a special stainless-steel cone sits on top of a cable television antenna. the cost of the stainless steel is per cm 3. the cone has a radius of 9 cm and a height of 10 cm. what is the cost of the stainless steel needed to make this solid steel cone? round to the nearest cent.
The correct answer is the cost of the antenna stainless steel is $8.00 per cubic centimeter.
Antennas are much more than simple devices connected to every radio. They're the transducers that convert the voltage from a transmitter into a radio signal. And they pick radio signals out of the air and convert them into a voltage for recovery in a receiver.plural antennae : one of a pair of slender, movable, segmented sensory organs on the head of insects, myriapods, and crustaceans see insect illustration. : a usually metallic device (such as a rod or wire) for radiating or receiving radio waves.
To learn more about antenna click the link below:
brainly.com/question/13068622
#SPJ4
if you were a landscape architect, what design choices would you use to reduce the urban island effect if you were designing a new shopping center?
By shading building surfaces, reflecting solar radiation, and releasing moisture into the air, trees, green roofs, and vegetation can help lessen the effects of urban heat islands.
How do trees lower urban heat island?The most obvious factor is shade first. Our skin and the ground are shielded from the sun's beams by leafy canopies. This is crucial in urban areas because man-made surfaces like asphalt, concrete structures, metal from vehicles and buses, and other artificial settings, absorb heat more quickly than their natural counterparts.Five basic strategies are being used by numerous localities to mitigate urban heat islands: Increasing the amount of trees and vegetation, adding green roofs, using cool roofing—mostly reflecting ones, adding cool pavements (either reflective or permeable), and implementing smart growth strategies are all examples of ways to reduce heat.By shading building surfaces, reflecting solar radiation, and releasing moisture into the air, trees, green roofs, and vegetation can help lessen the effects of urban heat islands.To learn more about Urban heat islands refer to:
https://brainly.com/question/12051381
#SPJ4
Determine the line load for the water heater in this residence. Water heater (28 kVA)
The line load for the water heater in this residence is 117 A.
What is the current concept?Electric current is the flow of electric charges caused by a potential difference. Electric current is the movement of electric charges, such as electrons, that occurs inside different materials, due to the application of a difference in electric potential.
The I is calculated as follows:I = P/E
I = 28,000VA/240V
I=28,000A/240
I = 116.67A = 117A
Therefore, the value for I is calculated as 117A.
See more about current at brainly.com/question/14287268
#SPJ1
A soda can has a strain gage mounted on the surface of the can. upon opening the can, the strain gage shows that in the circumferential direction, the can was released from a strain of 0.0010. if the can has a radius of 3 cm, a wall thickness of 0.13 mm, and was made from an aluminum alloy with modulus of elasticity 70 gpa, compute the pressure that was inside the can before it was opened. report your answer in kpa relative to atmospheric pressure (i.e., the difference in pressure between the inside of the can and the surrounding atmosphere).
A pressure gradient is the differential in pressure between high and low pressure areas. At sea level, the average air pressure is around 101,000 Pa, or 101 kPa (kiloPascals).
How do you determine a strain gauge's value?Pressure in thin walled pressure vessels must be continuously monitored, according to ASME boiler rules. A cylinder with thin walls has a wall thickness of r/10, where r is the cylinder's radius. In this case, just the membrane stresses are taken into account, and it is assumed that they remain constant over the entire t-value for the wall thickness.A stress study of the tank's cross section, such as one along the following line, can be used to determine the hoop stress.Remember that in this situation, the relationship between strain and stress is eHoop = (sHoop - n sLong)/E (3), which may be rearranged for pressure by replacing Eqs. 1 and 2 into 3:P is equal to ete/[r (1 - n/2)] (4) where elastic modulus E = 12.7 x 106 psi and Poisson's ratio n = 0.30.for the test pressure vessels we used. Consequently, the pressure inside the tank can be immediately determined by a strain gauge positioned externally in the circumferential direction of the vessel.To learn more about ASME boiler rules refer to:
https://brainly.com/question/15244988
#SPJ4
technician a says that hydrogen exists by itself in nature. technician b says that hydrogen has better specific energy than fossil fuels. which technician is correct?
Technician b says that hydrogen has better specific energy than fossil fuels. so technician b is correct.
Does hydrogen have the highest specific energy?Although hydrogen has the highest energy density per mass of any fuel, it has the lowest energy density per unit volume due to its low ambient temperature density, necessitating the development of new storage technologies with the potential for higher energy density.Hydrogen is utilized as a rocket fuel and in fuel cells to generate power on some spacecraft because it is beneficial as an energy source or fuel due to its high energy content per unit of weight.Since hydrogen has a significantly higher energy content than fossil fuels, less of it is required to carry out any given task.To learn more about energy refer to:
https://brainly.com/question/25959744
#SPJ4
an aircraft component is fabricated from an aluminum alloy that has a plane strain fracture toughness of . it has been determined that fracture results at a stress of
The correct answer is Plain strain fracture toughness for aluminum alloy.
The plane strain fracture toughness is 27.5 MPa m 1 2 . KIc values obtained from specimens of different crack plane orientations were found to remain constant, indicating the lack of anisotropy in the material.Features of strength and fracture in aluminum alloys. Since many second phase particles are contained, the fracture of aluminum alloys is the ductile fracture of the dimple formation type.
To learn more about strain fracture click the link below:
brainly.com/question/15348415
#SPJ4
technician a says that the front toe determines the thrust angle. technician b says that a tolerance adjustment involves removing and reinstalling subframe bolts. which technician is correct?
Answer:
Technician B
Explanation:
In the mesh created, you should have 1000 elements and 1111 nodes. How many values will Fluent have to determine directly by solving a system of algebraic equations? Please input answers as an integer (eg. 1, or 80, or 150, etc.).
Whenever 1000 elements and 1111 nodes are created, the Fluent will have a total of 20 values.
What are algebraic equations?An algebraic equation, also known as a polynomial equation, is a mathematical equation of the form P=0, where P is a polynomial with coefficients in some field, most commonly the field of rational numbers.
The number of elements along the x direction is m, and the number of elements along the y direction is n.
So,
m × n = 1000 ( Elements)
m × n + m + n + 1 = 1111 (Nodes)
m + n = 1000
If m = 100 then n = 10. These values satisfy both the equations.
Each element will now have one velocity, pressure, or temperature component. So, for each case, there will be 1000 algebraic simultaneous equations.
Thus, 20 values will be the answer.
For more details regarding nodes, visit:
https://brainly.com/question/28064122
#SPJ1
a food refrigerator is to provide a 15,000-kj/h cooling effect while rejecting 22400 kj/h of heat. calculate the cop of this refrigerator
The COP has a value of about 3.14. Lower levels of COP will be produced by higher warm temperature space than lower cold temperature space.
What does a freezer's COP stand for?A deep freeze unit will have a coefficient of performance (COP) that is closer to 1.0 than a residential refrigerator, which may have a COP of roughly 2.5. Lower levels of COP will be produced by higher warm temperature space than lower cold temperature space.The formula COP = ((T2)/(T2 - T1)) is used to compute the coefficient of performance, also referred to as COP. T2 stands for the hot temperature and T1 for the cold temperature. The same applies to these: COP = heat ejected / (heat ejected - heat provided)COP = 22,000 / (22,000 - 15,000) = 3.14 when the formula is changed.Consequently, the COP has a value of about 3.14.To learn more about COP refer to:
https://brainly.com/question/12950677
#SPJ4
