question 1
pls help asap

Enzymes can be reused. Because they are not reactants, enzymes are not depleted during a reaction. An enzyme can be employed for other reactions after it has catalysed a reaction and been freed from its binding to a substrate.

Our bodies include enzymes that function as catalysts to quicken processes by reducing the activation energy required to initiate a reaction. The substrate is a molecule that fits into a specific location on each enzyme molecule known as the active site. Like when you insert a key into a lock and the lock unlocks, the substrate undergoes a chemical reaction and transforms into a new molecule called the product.

Each cell in your body includes thousands of distinct enzymes since they are required for the majority of chemical processes. Chemical processes in the body can occur millions of times more quickly with the aid of enzymes than they would otherwise. Enzymes may be utilised over and over again because they are not a component of the final product. How productive!

Learn more about Enzymes here:

https://brainly.com/question/24811456

#SPJ4

The concept Boyle's law is used here to determine the volume of the gas at STP. The volume of dry gas at STP is 576.17 mL.

The Boyle's law states that at constant temperature, the volume of a given mass of gas is inversely proportional to its pressure. Mathematically the law can be expressed as:

PV = k (Constant)

For two different gases, the equation is:

P₁V₁ = P₂V₂

Then the new volume is:

V₂ = P₁V₁ /  P₂

= 115.4 × 350.0 / 70.1

= 576.17 mL

Thus the volume of the dry gas is 576.17 mL.

To know more about Boyle's law visit;

https://brainly.com/question/30367133

#SPJ1

If you wanted to make 25 grams of 18-karat white gold for a ring then grams of each metal will remain same.

Gold has the chemical symbol Au (from Latin: aurum) as well as the atomic number 79. As a result, it is one among the highest atomic number elements found in nature.

Some gold used for jewelry is called '18-karat white gold. This alloy is 75% gold (Au), 12.5% silver (Ag), and 12.5% copper (Cu). If you wanted to make 25 grams of 18-karat white gold for a ring then grams of each metal will remain same.

Therefore, if you wanted to make 25 grams of 18-karat white gold for a ring then grams of each metal will remain same.

To learn more about gold, here:

https://brainly.com/question/857882

#SPJ1

Henry Moseley used the analysis of X-ray spectra to determine the atomic number in the year 1913. He discovered that when the atomic number of an element is increased by one, certain lines in its x-ray spectra travel by the same amount each time.

In 1913–1914, English physicist Henry Moseley discovered and published the law. The "atomic number" of an element was previously only known as its position in the periodic table and had no known connection to any quantifiable physical property before Moseley's work. Chemical elements are identified exclusively by their atomic number. We owe Henry Moseley, a British physicist, credit for this discovery since he used physical rules to support this empirical and chemical understanding of the atomic number.

Learn more about atomic number here:

https://brainly.com/question/16858932

#SPJ4

In Benedict's experiment, sulfuric acid is utilised as a catalyst to speed up the reaction between the copper (II) ions in the reagent and the reducing sugars.

A laboratory technique called Benedict's test is used to find reducing sugars in a sample. The sample is heated after being mixed with Benedict's reagent, a blue solution containing copper (II) ions, in order to conduct the test. The copper ions in the reagent will be reduced if reducing sugars are present in the sample, which will result in the production of a reddish-brown precipitate. The quantity of reducing sugars in the sample is indicated by how strongly the colour changes. In the food sector, the Benedict's test is frequently used to estimate the content of reducing sugars including lactose, fructose, and glucose in foods.

Learn more about Benedict's test. here:

https://brainly.com/question/25800056

#SPJ4

At the same temperature, the gas has a 2.5 L volume at 7.0 atm. Volume in the context of gases is the quantity of space a gas takes up.

The ideal gas law, which connects a gas's pressure, volume, and temperature, can be used to solve this issue. PV = nRT. Assuming that the temperature stays constant, we may apply the ideal gas law in the following manner: P1V1 = P2V2. With the supplied values plugged in, we obtain (5.0 atm)(3.5 L) = (7.0 atm) (V2). We can calculate V2 as follows: V2 = (5.0 atm)(3.5 L) / (7.0 atm) = 2.5 L. As a result, the gas has a 2.5 L volume at the same temperature at 7.0 atm. In many industrial, scientific, and medical applications, accurate gas volume measurement and management are crucial.

Learn more about Volume here:

https://brainly.com/question/28368781

#SPJ4

The bonding that involves the transfer of electrons to form cations and anions is known as ionic bonding.

Ionic bond, additionally known as electrovalent bond, form of linkage fashioned from the electrostatic appeal among oppositely charged ions in a chemical compound. Such a bond paperwork while the valence (outermost) electrons of 1 atom are transferred completely to some other atom. Ionic bonding is the entire switch of valence electron(s) among atoms. It is a form of chemical bond that generates oppositely charged ions. In ionic bonds, the steel loses electrons to emerge as a undoubtedly charged cation, while the nonmetal accepts the ones electrons to emerge as a negatively charged anion.

To learn more about ionic bond check the link below:

https://brainly.com/question/957239

#SPJ4

You are experimenting with blood samples and you place a drop of rbcs into a solution of 300 millimoles of CaCl2, there is no efect on RBCs.

The reason why the cell would shrink further in CaCl2 result is because it has a advanced van't Hoff factor i.e. total number of separated ionic species per solute patch( it is 2 for NaCl whereas it's 3 for CaCl2).

Nonionic solutes don't disconnect and will thus have a van't Hoff factor of 1)

Bibulous pressure( and other colligative parcels) are commensurable to van't Hoff factor. thus bibulous pressure in CaCl2 result will be3/2 times of that in an equimolar NaCl result.

Note that the ionic chemical eventuality isn't what drives osmosis; it's the discriminational attention of water( or any other detergent) that drives it.

Learn more about RBCs:

brainly.com/question/14639342

#SPJ4

Using pure oxygen instead of air for combustion would result in a higher flame temperature.

This is because air contains a significant amount of nitrogen (about 78% by volume), which is not involved in the combustion reaction and therefore acts as a diluent, reducing the concentration of oxygen available for the reaction. By using pure oxygen, the concentration of oxygen is increased, allowing for more complete combustion and producing a higher flame temperature. The first law of thermodynamics, also known as the law of conservation of energy, states that energy cannot be created or destroyed, but it can be transformed from one form to another. In the case of combustion, the chemical energy stored in the fuel is transformed into thermal energy (heat) and other forms of energy, such as light and sound. The amount of heat released during combustion is determined by the enthalpy change of the reaction, which depends on the chemical composition of the reactants and products.

Learn more about combustion here:

https://brainly.com/question/15117038

#SPJ4

In the given sample, when the water level is rises from 23.8ml to 28.5 ml,  the density of the metal is 5.00 g/cm³

To find the density of the metal, we need to use the formula:

density = mass / volume

We are given the mass of the metal as 23.5 g. To find the volume of the metal, we need to subtract the initial volume of water in the cylinder from the final volume of water after the metal is added. The difference in volume is equal to the volume of the metal.

The initial volume of water is 23.8 ml, and the final volume of water is 28.5 ml, so the volume of the metal is:

volume = final volume - initial volume

volume = 28.5 ml - 23.8 ml

volume = 4.7 ml

Now we can substitute the values for mass and volume into the density formula:

density = mass / volume

density = 23.5 g / 4.7 ml

We need to convert the volume to cubic centimeters (cm³) because the units of density are expressed in g/cm³.

1 ml is equal to 1 cm³, so:

density = 23.5 g / 4.7 cm³

density = 5.00 g/cm³ (rounded to two decimal places).

Learn more about density here: brainly.com/question/26364788

#SPJ4

The correct option is d.)1s3  Explanation s- orbital can hold a maximum of 2 electrons.

1s3- There is only one s orbital per energy level, and each orbital can hold a maximum of two electrons, so there can not be 3s electrons at any energy level. The Aufbau principle dictates the manner in which electrons are filled in the atomic orbitals of an atom in its ground state.

It states that electrons are filled into atomic orbitals in the increasing order of orbital energy level. According to the Aufbau principle, the available atomic orbitals with the lowest energy levels are occupied before those with higher energy levels.

To know more about Aufbau principle please refer:

https://brainly.com/question/13393709

#SPJ4

Answer:

The concentration of N2(g) in parts per billion (ppb) in a solution can be calculated as follows:

(mass of N2(g) in solution / total mass of solution) * 10^9 ppb

Plugging in the given values, we have:

(1.5 * 10^-6 g / (7.5 g + 1.5 * 10^-6 g)) * 10^9 ppb = (1.5 * 10^-6 g / 7.5 g) * 10^9 ppb = 200 ppb

So, the concentration of N2(g) in the solution is 200 ppb.

Answer:

Chemists typically investigate questions related to the composition, structure, and properties of matter, as well as its interactions with energy and other substances. Some examples of questions that a chemist might investigate include:

What is the chemical composition of a given substance?

How does the structure of a molecule affect its properties?

How do different chemical reactions occur, and what are the conditions necessary for them to occur?

How do substances interact with one another in solution?

What is the rate at which a chemical reaction occurs, and how can it be influenced by various factors such as temperature, pressure, and concentration?

Explanation:

These are just a few examples of the types of questions that a chemist might investigate. In general, a chemist's research is focused on understanding the underlying principles and processes of matter and energy at the molecular and atomic level.

Freezing point depression requires a solution to occur. Brine starts as a solution, where solid salt must form a solution first. The brine solution can more evenly coat the surface of the road, making the ice prevention more widespread.

Brine solution is the NaCl solution in  water at very higher concentration. It forms in salt lakes and sea water. Brine solution is a commercially important one.

Brine solution is an effective solution to de-ice than traditional solid ice-melt. Normal solid salt crystals have to be dissolved first . Whereas, brine is already a solution.

Freezing point depression requires a solution to occur. The brine solution can more evenly coat the surface of the road, making the ice prevention more widespread.

Find more on brine solution:

https://brainly.com/question/7613599

#SPJ1

Molar mass of MgF2 = 62.30 g/mol and freezing point = 0 °C - 0.764 °C = -0.764 °C

a) To calculate the freezing point depression of a solution, we can use the formula:

ΔTf = Kf x molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent (water) and molality is the concentration of the solute (FeCl3) in moles per kilogram of solvent (water).

The molality of the solution can be calculated as follows:

mass of FeCl3 = 10.6 g

molar mass of FeCl3 = 162.2 g/mol

moles of FeCl3 = mass / molar mass = 10.6 g / 162.2 g/mol = 0.0654 mol

mass of water = 159 g

molality = moles of solute / mass of solvent (in kg) = 0.0654 mol / 0.159 kg = 0.411 mol/kg

The freezing point depression constant for water is 1.86 °C/m. Thus, the change in freezing point can be calculated as follows:

ΔTf = Kf x molality = 1.86 °C/m x 0.411 mol/kg = 0.764 °C

The freezing point of pure water is 0 °C, so the freezing point of the solution is:

freezing point = 0 °C - 0.764 °C = -0.764 °C

b) To calculate the boiling point elevation of a solution, we can use the formula:

ΔTb = Kb x molality

where ΔTb is the change in boiling point, Kb is the boiling point elevation constant for the solvent (water) and molality is the concentration of the solute (KCl) in moles per kilogram of solvent (water).

The molality of the solution can be calculated as follows:

mass of KCl = 3.9 g

molar mass of KCl = 74.55 g/mol

moles of KCl = mass / molar mass = 3.9 g / 74.55 g/mol = 0.0523 mol

mass of water = 100 g (assuming the total mass of the solution is 103.9 g, with 3.9 g KCl and 100 g water)

molality = moles of solute / mass of solvent (in kg) = 0.0523 mol / 0.1 kg = 0.523 mol/kg

The boiling point elevation constant for water is 0.52 °C/m. Thus, the change in boiling point can be calculated as follows:

ΔTb = Kb x molality = 0.52 °C/m x 0.523 mol/kg = 0.272 °C

The boiling point of pure water is 100 °C, so the boiling point of the solution is:

boiling point = 100 °C + 0.272 °C = 100.272 °C

c) To calculate the freezing point depression of a solution, we can use the formula:

ΔTf = Kf x molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent (water) and molality is the concentration of the solute (MgF2) in moles per kilogram of solvent (water).

The molality of the solution can be calculated as follows:

molarity of MgF2 = 0.168 mol/L

molar mass of MgF2 = 62.30 g/mol

mass of MgF2 in 1 L of solution = molarity x volume x m

Find out more about  freezing point

brainly.com/question/30675499

#SPJ4

The most oxygen atoms shared by pairs of neighbouring tetrahedra are found in double chain silicates, which is the most common kind of silicate.

This particular silicate consists of silicon atoms bound to other silicon atoms in a chain with oxygen atoms, with oxygen atoms forming the corners of the tetrahedra. As compared to other forms of silicates, these chains share oxygen atoms with neighbouring chains, leading to a higher percentage of oxygen atoms shared by pairs of adjacent tetrahedra. Due to the lack of connectedness between their tetrahedral units, other silicate types, such as sheet silicates and framework silicates, have a lower percentage of oxygen atoms shared by pairs of neighbouring tetrahedra. Because of this, double chain silicates have a tendency to be more dense and structurally complicated than other silicate kinds.

learn more about oxygen atoms here:

https://brainly.com/question/7695753

#SPJ4

The pioneers found that placing a large tub of water in a storage cellar would prevent their-food from freezing on really cold nights, it can absorb or lose quite a bit of energy.

Because water has a high specific heat, it can absorb or lose quite a bit of energy and not witness important change in temperature. The water would act as a means of precluding the temperature in the basement from varying important so that stored goods would neither indurate nor come too warm.

The high mass and specific heat of the barrel of water and its high heat of emulsion mean that a large quantum of energy would have to blunder out of the basement before the water and the yield set solid. Evaporation of the water keeps the relative moisture high to cover foodstuffs from drying out.

Learn more about Storage cellar problems:

https://brainly.com/question/13723748

#SPJ4

[tex]CCl_4[/tex] is the least soluble in water because it is a non-polar molecule that lacks a significant dipole moment and therefore does not interact well with  polar water molecules.

The term "dissolve" describes a substance's capacity to combine uniformly with another substance, usually a liquid like water. In order for a substance to dissolve in water, its molecules must engage in molecular interactions with the water molecules that enable the two substances to combine. In most cases, this entails the creation of hydrogen bonds between the molecules of the solute and the water, enabling the solute to be encircled by water molecules and dispersed uniformly throughout the solution. The polarity, molecular makeup, and intermolecular interactions of a substance, among other things, affect its capacity to dissolve in water.

Learn more about dissolve here:

brainly.com/question/29378913

#SPJ4

The actual question is:

Which of the following substances is least likely to dissolve in water?

[tex]CHCl_3[/tex], [tex]CCl_4[/tex], [tex]CH_3(CH_2)_8CH_2OH[/tex], [tex]HOCH_2CH_2OH[/tex], [tex]CH_3(CH_2)_9COH[/tex]

Separation of materials according to their acidic- basic properties is known as acid-base extraction method. This is commonly used in separating organic compounds.

Here we have to separate a basic compound from a mixture containing acidic, basic and neutral compounds. Usually these are dissolved in organic solvents. Basic compounds usually accepts protons from a strong acid. So a strong acid like HCl is used to provide protons. The bases reacts with the acids and ionic compounds are formed. But the acidic and neutral compounds do not react.

The ionic compounds are ionized and readily dissolved in water. We are adding aqueous solutions of acid. So while shaking vigorously, the basic compound, which is ionized dissolves in water layer. Unionized acidic and neutral compounds remains in organic solvent layer. The water layer and organic solvent layer separates according to density. We extract the basic compound along with water.

So acid-base extraction method is used here.

For more information regarding acid-base extraction method, kindly refer

https://brainly.com/question/29334954

#SPJ4

the molar mass of Mercury is 200.59 u

Answer:

There is just one stereoisomer that can exist. The product's structure is shown in the figure below, attached.

Below is a diagram illustrating the reaction's transition state. Because of this transition state, the trans alkene never produces trans product while the cis alkene always produces cis product.

According to a general definition, stereoisomers are isomers with the same composition (i.e., the same components), but different orientations in space. Enantiomers and diastereomers are the two different types of stereoisomers. Diastereomers are everything else, while enantiomers are mirror images, like one's hands. However, as was already said, timing and energy are crucial. It is useful to first think about a particular sort of stereoisomer, the conformational isomer, in order to comprehend these concerns.

Learn more about Stereoisomers here:

https://brainly.com/question/16986110

#SPJ4

The total mass of the products is 125 g

The law of conservation of mass, also known as the principle of mass conservation, states that the total mass of a closed system remains constant over time, regardless of the changes that may occur within the system. This means that the mass of the system can change form, but the total mass remains the same.

The law of conservation of mass is a fundamental principle in physics and is widely accepted as a basic law of nature. It is based on the idea that matter can be neither created nor destroyed, only transformed from one form to another.

Learn more about the conservation of mass:https://brainly.com/question/13383562

#SPJ1

Number of moles of O2 produced by  the decomposition of 6.2 moles of KCLO3 is 9.3 moles.

The mole idea is a useful way to indicate how much of a substance there is. Any measurement can be divided into two components: the magnitude in numbers and the units in which the magnitude is expressed.

Initial reaction,

KCLO3 ⇒ KCL + O2

The ratio is 1: 1 for KClO3 and O2

After balancing the equation we get,

2KClO3 ⇒ 2KCl + 3O2

So ratio of  KClO3 and O2  is now 2:3

For every 2 moles of KClO3 we have 3 moles of O2 so

For  6.2 moles of KCLO3,

Number of moles of O2 = 6.2x3/2

= 9.3 moles

Therefore, number of moles of O2 produced by  the decomposition of 6.2 moles of KCLO3 is 9.3 moles.

Learn more about Moles;

https://brainly.com/question/28037816

#SPJ4

For this reaction, the appropriate equilibrium relation is x = (Kc)1/4.

Write the reaction's equilibrium constant expression. To find x, substitute the final concentrations and the known K value. Determine each substance's final concentration in the reaction mixture. By adding these values to the expression for the equilibrium constant to get K, you may verify your answers.

Nickel tetracarbonyl, Ni(CO)4, decomposes in an equilibrium reaction that is:

Ni(CO)4(g) ⇌ Ni(s) + 4CO(g)

which is given by the expression:

Kc = [Ni(s)] [CO]4 / [Ni(CO)4(g)]

The initial concentration of nickel tetracarbonyl gas is also given as 1.0 M.

Let x be the equilibrium concentration of CO gas, then the equilibrium expression can be written as:

Kc = (1) (x)4 / (1.0)

Simplifying the expression gives:

Kc = x4

Taking the fourth root of both sides gives the equilibrium relation:

x = (Kc)1/4

To know more about equilibrium reaction visit:-

https://brainly.com/question/15118952

#SPJ1

When 1-bromopropane is subjected to magnesium, 1-pentanol results, which is then followed by ethylene oxide and aqueous acid.

A Grignard reagent is created when 1-bromopropane reacts with magnesium to begin the process. Then, the ethylene oxide and the Grignard reagent combine to create an intermediary molecule. Aqueous acid is then used to transform this intermediate chemical into 1-pentanol.

To turn alkenes into alcohols, a technique known as the "Wacker oxidation" or "Wacker process" is utilized. It is significant to remember that Wacker oxidation is a multi-step procedure that calls for particular reagents and circumstances in order to be properly carried out. To produce the desired product, the reaction must be carried out in an inert environment at high temperatures.

To learn more about 1-bromopropane click here https://brainly.com/question/21286023

#SPJ4

compete question: when 1-bromopropane is exposed to magnesium, followed by ethylene oxide, and then aqueous acid, what is the resulting product? a.) 2-pentanol b.) 2-methyl-2-pentanol c.) 2-methyl-2-hexanol d.) 1-pentanol

The molality of HCl in the solution is[tex]0.00122 mol/kg[/tex]

Molality is defined as the number of moles of a solute in one kilogram of a solvent. In this case, the solvent is water.

To calculate the molality, we first need to calculate the molarity of the solution. Molarity is defined as the number of moles of a solute in one liter of solution.

To calculate the molarity, we need to know the mass of the solute (HCl) and the volume of the solution. The mass of the solute can be calculated using the density of the solution (1.22 g/ml):

Mass of HCl =[tex]Density * Volume[/tex]

Volume = [tex]\frac{Mass}{Density }[/tex]

Volume =[tex]\frac{(12.0 mol/L) }{ (1.22 g/ml) }= 9.839 L[/tex]

Molarity = [tex]\frac{ (12.0 mol/L) }{(9.839 L) }= 1.22 mol/L[/tex]

Now, we can calculate the molality:

Molality = [tex]\frac{ (1.22 mol/L) }{(1000 g/kg) }= 0.00122 mol/kg[/tex]

Therefore, the molality of HCl in the solution is [tex]0.00122 mol/kg[/tex].

learn more about Molality Refer:brainly.com/question/26921570

#SPJ4

Cis-jasmone is a natural product with a molecular formula of C11H16O. It has a cyclopentenone ring and an unsaturated side chain with a cis double bond. The structure of cis-jasmone can be drawn as follows:

     H

      |

   H--C--O

      |  |

H--C--C--C--CH3

   |  |  |

   H  H--C=C

          |

          H

The synthesis of cis-jasmone from alkyne A using H2 in the presence of the Lindlar catalyst involves the hydrogenation of the alkyne to form a cis-alkene, followed by cyclization to form the cyclopentenone ring.

Cis-jasmone is a natural organic compound with the molecular formula C11H16O. It has a cyclopentenone ring and an unsaturated side chain with a cis double bond. Cis-jasmone is a fragrant compound that is responsible for the characteristic aroma of jasmine flowers. It is used in perfumes and as a flavoring agent in the food industry.

To know more about Cis-jasmone: https://brainly.com/question/11853259

#SPJ4

By titration, it is found that the 11.9 ml of the 0.101 M NaOH(aq) is needed to neutralize the 25.0 ml of HCl(aq).The concentration of the HCl solution is 0.048 M.

The reaction is as follows :

NaOH + HCl ---->  NaCl  +  H₂O

The concentration of the NaOH = 0.101 M

The volume of the NaOH = 11.9 mL = 0.0119 L

The moles of the NaOH = molarity ×volume

                                        = 0.101 × 0.0119

                                        = 0.0012 mol

The Volume of the HCl = 25 mL = 0.025 L

The moles of the HCl = 0.0012 mol

The concentration of the HCl = moles / volumes in L

                                                 = 0.0012 / 0.025

                                                 = 0.048 M

To learn more about concentration here

https://brainly.com/question/19738563

#SPJ4

Ans) d- 1s3

The s- orbital can accommodate up to two electrons. The aforementioned configuration is faulty because there are three "s" electrons, which is not conceivable.

Since there are two electrons, 2s2 is conceivable.

The greatest number of electrons in the d orbital is 10. Thus, 5d9 is also conceivable.

The p orbital can accommodate up to 6 electrons. So 3p4 is also a possibility.

To know more about electron visit:

https://brainly.com/question/1255220

#SPJ1