The average atomic mass of the element is calculated to be 69.7256 amu.
What is average atomic mass?The average atomic mass of an element is the weighted average mass of atoms in naturally occurring sample of the element.
Given, atomic mass of isotope-1 = 68.926 amu ; percent abundance of isotope-1 = 60.00% ; atomic mass of isotope-2 = 70.925 amu ; percent abundance of isotope-2 = 40.00%
Fractional abundance of isotope-1 = 0.6000
Fractional abundance of isotope-2 = 0.4000
Average atomic mass of an element = A
A = ∑ [Atomic mass of an isotope + fractional abundance of isotope]
A= 69.7256 amu
So, the average atomic mass of the element is equal to 69.7256 amu.
To know more about average atomic mass, refer
https://brainly.com/question/24666479
#SPJ4
In the following reactions: C3H8 + 5O2--> 3 CO2 + 4 H2O If you wanted to produce 9 moles of CO2, how many moles of C3H8 would you need
9 moles of CO2 would require 9 moles of C3H8 since the ratio of C3H8 to CO2 is 1:3. This is because the balanced chemical equation for the reaction is C3H8 + 5O2 --> 3CO2 + 4H2O. This equation shows that for every 1 mole of C3H8, there will be 3 moles of CO2 produced.
Furthermore, the stoichiometric coefficients of the reactants and products indicate the relative amounts of each reactant and product in the reaction. Hence, reaction stoichiometry can be used to calculate the amount of each reactant or product needed to produce a desired amount of product.
This is especially useful in determining the amount of a reactant needed to produce a certain amount of product. In this case, the stoichiometry of the equation indicates that 9 moles of C3H8 would be needed to produce 9 moles of CO2.
To know more about balanced chemical equations refer to the link brainly.com/question/28294176
#SPJ4
If you find a chemical in the lab and are unsure ofits identity, what is the best way to find out what itis?
The best way to find out what a chemical is in the lab is to consult the safety data sheet (SDS) for the chemical. An SDS will provide detailed information about the chemical, including its identity, hazards, and safe handling instructions.
If an SDS is not available, contact the supplier to request an SDS or consult a professional chemical reference book. Additionally, if there is a label on the container, it may provide the chemical identity. If the chemical is a mixture of multiple components, the best way to identify it is to run a chromatography analysis to separate and identify the components.
To know more about chemicals refer to the link brainly.com/question/13145357
#SPJ4
As the number of bonds between two carbon atoms increases, which one of the
following decreases?a. number of electrons between the carbon atoms
b. bond energy
c. bond length
d. all of these
e. none of these
As the number of bonds between two carbon atoms increases, bond length decreases
The bond length is the separation among two bound atoms' centres. It represents the separation of the two atoms inside each nucleus along the potential energy curve at the lowest potential energy state of the system. Since there are more bonds between two carbon atoms, the electrons are shared more tightly and the bond length is shortened.
As an illustration, the average bond length for a single bond is about 154 pm, while the average bond length for a triple bond is about 120 pm. This is because numerous bonds have shorter bond lengths because of the stronger attraction of the electrons to the atom nuclei.
Read more about bond length on:
https://brainly.com/question/28666623
#SPJ4
plese hurrry Which of the following best describes a predator/prey relationship in the forest? 100 points.
Question 8 options:
mistletoe growing on a Mesquite tree
a deer eating the green leaves and berries on a holly bush
bacteria and mold break down fallen leaves on the forest floor
a spotted owl swoops down and captures a mouse
Answer: A spotted owl swoops down and captures a mouse
Explanation: The owl is the predator and the prey is the mouse. :)
Answer:
A spotted owl swoops down and captures a mouse best describes a predator/prey relationship in the forest.Starting with one molecule of isocitrate and ending with fumarate what is the maximum number of ATP molecules that could be made through substrate-level phosphorylation?
Starting with one molecule of isocitrate and ending with fumarate the maximum number of ATP molecules that could be made through substrate-level phosphorylation is one
Cells primarily employ adenosine triphosphate, or ATP, as their source of energy. It can be broken down to liberate the energy held in its phosphate bonds, which have a lot of energy. In the first stage of the citric acid cycle, isocitrate is changed into alpha-ketoglutarate, which causes substrate-level phosphorylation to produce one molecule of NADH.
The remaining phases of the citric acid cycle use the NADH and FADH2 created during the cycle to make ATP through the electron transport chain rather than substrate-level phosphorylation. Therefore, one isocitrate molecule can only be converted into one ATP molecule through substrate-level phosphorylation.
Read more about ATP on:
https://brainly.com/question/14796956
#SPJ4
the activation energy for a reaction is changed from 237 kj/mol to 57.9 kj/mol at 653 k by the introduction of a catalyst. of the uncatalyzed reaction takes about 2290 years to occur, about how long will the catalyzed reaction take? assume the frequency factor a is constant and assume the initial concentrations are the same.
The activation energy for a reaction is changed from 237 kj/mol to 57.9 Kj/mol at 653 k by the introduction of a catalyst. of the uncatalyzed reaction takes about 2290 years to occur then about 1.64 * 10³yr⁻¹ will be consumed by uncatalyzed reaction if we assume the frequency factor a is constant and assume the initial concentrations are the same.
Activation energy for uncatalyzed energy,
Eₐ(1) = 237kJ/mol
Activation energy for catalyzed reaction,
57.9 kJ/mol
Time taken by uncatalyzed reaction,
t₁=2290 years
Temperature, T=653 K
First, we will find the rate constant for the uncatalyzed reaction:
k ∝ 1/t
k₁ = 1/2290yr=0.00040 yr⁻¹
The rate constant the catalyzed reaction (k2) is calculated as follows:
[tex]ln\frac{K_{2} }{K_{1} }[/tex] = [tex]\frac{E_{a(1) -E_{a(2)} } }{RT_{} }[/tex]
R=8.314 J/K⋅mol
K₂ = -6.08 * 10⁻⁴ yr⁻¹
Now, we will find time taken by catalyzed reaction:
t₂ = 1/k₂
t₂ = 1.64 * 10³yr⁻¹
Learn more about uncatalyzed reaction visit:
brainly.com/question/13059657
#SPJ4
3. When atoms bond, the electron configuration of each atom in the bond
resembles those of the nearest
1.Halogen
2.Noble Gas
3.Alkaline earth metal
4.Alkali metal
Answer:
Noble gas
Explanation:
Noble gases are the most stable elements on the periodic table, so every element aims to bond in a way that will make them have the same number of valence electrons as the noble gases. Valence electrons are the electrons in the outer ring of an element. Noble gases have eight valence electrons, which is the most possible. All elements aim to be unreactive in this manner. Hope this helps!
A 25.0-mL sample of 0.125 M pyridine is titrated with 0.100 MHCl.
Part A
Calculate the pH at 0 mL of added acid.
Part B
Calculate the pH at 10 mL of added acid.
Calculate the pH at 20 mL of added acid.
Calculate the pH at equivalence point.
Calculate the pH at one-half equivalence point.
Calculate the pH at 40 mL of added acid.
Calculate the pH at 50 mL of added acid.
pH in Part A is 9.16, pH in Part B is 5.56, and pH in Part C is 4.98.
The meaning of pHa method for determining how basic or acidic something is. pH is measured on a scale from 0 to 14. On this scale, a pH of 7 denotes neutrality, meaning it is neither acidic nor basic. If the pH is less than or equal to 7, it is more acidic, and if it is greater than 7, it is more basic.
What causes the pH scale to range from 0 to 14?A pH value of no greater than 0 is produced by a hydrogen ion concentration of no more than 1M at the far end. On the opposite extreme, there are no more than 1M hydroxide ions, resulting in a pH of no more than 14.
To know more about pH visit:
https://brainly.com/question/15289741
#SPJ4
State 4 evidences to show
that matter Consists of particles
Answer:
All matter are composed of small particle which is known as atom.The atom cannot be divided into smaller particle, atom can neither be created nor can destroyed.All atoms in same element have same mass and properties.More that one atom combine to form compound.What is the force that exists between two atoms within a single molecule?
Answer:Intermolecular forces
Explanation:See in a molecule these intermolecular forces hold the atoms together which decides the rigidity of the material.
I hope the answer was helpful
locate the main groups of elements in each column on the periodic table, and identify the number of valence electrons there are in each element in a particular group. infer why some elements are more reactive than others due to their number of valence electrons. interpret and describe an example of a chemical formula. summarize the two parts a chemical formula must have. why do atoms bond? describe examples of the two ways elements complete their valence shell through bonding.
Number of valence electrons determine how fast/easy for an atom to gain stability. Either by gaining electrons or losing electrons. Group 1 & 7 elements react fast because they only have 1 electron to gain or lose.
What does the term "element" mean to you?A chemical substance is a species of atoms, such as the pure substance made entirely of that species, with a specific amount of protons in their nuclei. Chemical elements, in contrast to compounds, cannot be converted either by chemical reaction into simpler substances.
What are the 20 crucial elements?The first twenty elements include metals such as lithium, beryllium, sodium, potassium, magnesium, aluminum, and calcium. The non-metals in the first twenty are hydrogen, helium, carbon, nitrogen, oxygen, fluorine, neon, phosphorus, sulphur, chlorine, and argon.
To know more about elements visit :
https://brainly.com/question/14347616
#SPJ4
Calculate the percent ionization of 8.0×10−3 M butanoic acid (Ka=1.5×10−5) B. Calculate the percent ionization of 8.0×10−3 M butanoic acid in a solution containing 8.0×10−2 M sodium butanoate.
4.325% of 8.0 × [tex]10^{-3}[/tex] M butanoic acid be ionised, while only 0.018% of 8.0 ×[tex]10^{-3}[/tex] M butanoic acid be ionised in a solution that contains 8.0 ×[tex]10^{-2}[/tex] M sodium butanoate.
Ionization: What is it?Ionization is any process that involves adding or removing electrons to change electrically neutral molecules or atoms (ions) into electrical charges atoms or molecules (ions).
A. [Butanoic acid] = 8.0*10−3 M
Ka = 1.5*10∧-5
Butanoic acid ionizes as:
HA ⇄ H+ + A-
Initially 8.0*10−3 0 0
Finally 8.0*10−3 - x x x
Ka = x*x / 8.0*10−3 - x
1.5*10−5 = x*x / 8.0*10−3
1.2*10^-7 = x*x
x = 3.46*10^-4 M
Percent ionization = (3.46*10^-4 / 8.0*10−3) * 100
= 4.325 %
B). [Sodium butanoate] = 8.0*10^-2 M
HA ⇄ H+ + A-
Initially 8.0*10−3 0 0
Finally 8.0*10−3 - x x 8.0*10^-2 + x
Ka = x*(8.0*10^-2 + x) / 8.0*10−3 - x
1.5*10−5 = x*8.0*10^-2 + x*x / 8.0*10−3
1.2*10^-7 = x*x + x*8.0*10^-2
x*x + x*8.0*10^-2 - 1.2*10^-7 = 0
x = 1.49*10^-6 M
Percent ionization = (1.49*10^-6 / 8.0*10−3) * 100
= 0.018 %
To know more ionization visit :
https://brainly.com/question/1534353
#SPJ4
if 25 milliliters of 0.80 m hcl is used to completely neutralize 40 milliliters of naoh solution, what is the molarity of the base? group of answer choices 5.0 m 50 m 0.05 m 0.50 m
The base has a molarity of 0.5M if 25 milliliters of 0.80M HCl are used to fully neutralize 40 milliliters of NaOH solution.
How do you determine molarity?The following expression can be used to determine a solution's molarity:
M1V1 = M2V2
Where M1 is the acid's molarity.
M2 stands for the base's molarity.
V1 is equal to the acid's volume.
V2 is the volume of the base.
25 × 0.80 = 40 × M2
20 = 40M2\sM2 = 20/40\sM2 = 0.5M
As a result, the molarity of the base is 0.5M if 25 milliliters of 0.80 M HCl are used to totally neutralize 40 milliliters of NaOH solution.
To know more about molarity visit:
https://brainly.com/question/2817451
#SPJ4
A solution contains 2.2 x 10^-4 M Ag+ and 1.3 x 10^-3 M Pb^2+.
If NaI is added, will AgI (Ksp = 8.3 x 10^-17) or PbI2 (Ksp = 7.9 x 10^-9) precipitate first?
Specify the concentration of I- needed to begin precipitation.
The concentration of I- needed to begin precipitation will be [I⁻] = 3.77 x 10⁻¹³ M and (I)⁻² = 6.07 x 10⁻⁶.
Concentration is termed as the amount of a substance in a defined space.
2.2 x 10⁻⁴ M Ag⁺ (1)
1.3 x 10⁻³ M Pb₂⁺ (2)
1) Ag⁺ + NaI → AgI + Na⁺ (Ksp = 8.3 x 10⁻¹⁷)
2) Pb²⁺ + NaI → PbI₂ + Na+ (Ksp = 7.9 x 10⁻⁹)
Ksp = [Ag⁺] [I⁻] = (2.2 X 10⁻⁴ M) (I⁻)
Ksp = [Pb²⁺] [I]² = (1.3 X 10⁻³M) (I⁻)²
(1) 8.3 X 10⁻¹⁷ = (2.2 X 10⁻⁴M) (I⁻)
(I-) = 3.77 X 10⁻¹³ M
(2) 7.9 X 10⁻⁹ = (1.3 X 10⁻³M) (I⁻)²
6.07 X 10⁻⁶ = (I⁻)²
(I⁻)² = 6.07 X 10⁻⁶
To know more about concentration here
https://brainly.com/question/10725862
#SPJ4
at a certain time, the partial pressure of the gases in the reaction mixture represented above had the values shown in the table below. based on the information above, which of the following occurred as the reaction mixture moved toward equilibrium? (a) morewas produced because the rate of the forward reaction was higher than the rate of the reverse reaction. (b) more was produced because the rate of the reverse reaction was higher than the rate of the forward reaction. (c) morewas produced because the total pressure of the and combined was higher than that of the products; thus the reaction shifted to the side with the fewest number of moles of gas. (d) more was produced because the pressure of was the least and the reaction shifted to the side with the smaller number of moles of gas
A partial pressure of a gases inside the reaction mixture depicted above reached the levels based on (a) more at a certain point because the forward reaction's rate was greater than its reverse reaction's rate.
What is a mixture?A mixture is a substance created by mixing two or more distinct ingredients without causing a chemical reaction to take place. Usually, a combination may be broken down again into its constituent parts. When two or more substances come together physically rather than chemically, a mixture is created. Basic characteristics of a mixture: The components of a combination can be easily separated. The components each preserve their original properties. The components' relative weights vary.
What is a mixture example?A combination of organic substances known as crude oil (mainly hydrocarbons) Seawater is a combination of different salts and water. An amalgam of different gases, including oxygen, carbon dioxide, nitrogen, argon, neon, etc., is called air. A blend of colored dyes is called ink. Carbon, potassium nitrate, and sulfur are the main ingredients in gunpowder.
To know more about Mixture visit:
https://brainly.com/question/24898889
#SPJ4
For a fixed amount of gas at a fixed temperature, what will happen if the volume is doubled? Will the pressure be doubled, remain unchanged, quadruple, or be halve?
For a fixed amount of gas at a fixed temperature, if the volume is doubled, the pressure will be doubled.
It is because according to the Ideal Gas Law, pressure and volume are directly proportional to each other. As one goes up, the other one goes up by the same degree. Formula for Ideal Gas Law is PV = nRT.
What is the Ideal Gas Law?The Ideal Gas Law is the law in which the product of the pressure and the volume of one gram molecule of an ideal gas is equivalent to the product of the absolute temperature of the gas and the universal gas constant.
Learn more about Ideal Gas Law at: https://brainly.com/question/28257995
#SPJ4
• The vapour preure of the ketone carvone (M= 150. 2 g
mol-1), a component of oil of pearmint, i a follow:
θ/°C 57. 4 100. 4 133. 0 157. 3 203. 5 227. 5
p/Torr 1. 00 10. 0 40. 0 100 400 760
What are (a) the normal boiling point and (b) the enthalpy
of vaporization of carvone?
Carvone boils at 227 °C when its vapour pressure reaches 760 mmHg, which is normal pressure
What does vapour pressure mean?Vapour pressure rises with temperature and is a measurement of a substance's propensity to transform into a gaseous or vapour state. The boiling point of a liquid is the temperature at which the pressure exerted by its surroundings equals the vapour pressure present at the liquid's surface.
What makes vapour pressure so crucial?An indicator of a chemical's volatility is vapour pressure. Authorities and professionals frequently use it to forecast airborne chemical concentrations, occupational exposure, and environmental releases to the atmosphere. Data on vapour pressure is also necessary as a prerequisite for studies involving animals and the environment.
To know more about vapour pressure visit:
https://brainly.com/question/25699778
#SPJ4
.
if 4.0 l of a 4.9 m srcl2 solution is diluted to 40. l , what is the molarity of the diluted solution?
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.49M is the molarity of the diluted solution.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
According to the neutralization law,
M₁V₁=M₂V₂
where,
M₁ = molarity of stock solution =4.9 M
V₁ = volume of stock solution = 4.0l
M₂ = molarity of dilute solution =M₂
V₂ = volume of dilute solution = 40l
substituting all the given values we get
M₁V₁=M₂V₂
4.9 ×4.0=M₂×40
M₂=0.49M
Therefore, 0.49M is the molarity of the diluted solution.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ1
taking into account which direction the meter points, what is being reduced and what is being oxidized in the zinc and copper galvanic cell?
Taking into account the direction the meter points will be from left to right, the copper (||) ions are being reduced and Zn is being oxidized in the zinc and copper galvanic cell.
The direction of the flow of elections will be indicated by the direction of the needle, which will move from left to right. At this point, oxidation takes place at the Zn electrode, resulting in the release of e-, whilst the reduction of Cu+2 ion takes place at the Cu electrode, leading to the movement of electrons from left to right.
The correct answer is that the copper (||) ions are being reduced while the zinc ions are being oxidized.
You can also learn about oxidation from the following question:
https://brainly.com/question/16976470
#SPJ4
A 0.1 m solution is diluted by three orders of magnitude. what is the new concentration?
0.1 m solution is diluted by three orders of magnitude. The new concentration is 0.0001M.
What is meant by solution?A homogenous mixture of one or more solutes that have been dissolved in a solvent is referred to as a solution. A solute dissolve in a solvent to form a homogenous mixture. Solute: A material that dissolves in a solvent to form a homogenous mixture.
In chemistry, a solution is a homogeneous mixture of two or more compounds in relative proportions that can be constantly changed up to what is referred to as the limit of solubility. Although the term "solution" is frequently used to refer to the liquid state of matter, solutions of gases and solids are also possible.
Calculation:The new concentration will be 0.1/10x10x10 = 0.0001 m
To learn more about concentration visit:
brainly.com/question/2194077
#SPJ4
what information is provided in the study guide found at the end of the chapter? how to read a chemistry text
A study guide found at the end of a chemistry chapter typically provides a summary of the key concepts and information presented in the chapter, as well as a list of key terms and definitions.
study guide may also include review questions and exercises designed to help students test their understanding of the material and identify areas where they may need additional practice or review. Additionally, it may also include some sample problems, tips for solving problems, and explanations of key concepts, as well as a summary of the key equations, formulas, and laws that were discussed in the chapter.In general, a study guide is a useful tool for students to use as they work their way through a chemistry textbook. It can help students to identify the most important information in the chapter, focus their study efforts, and check their understanding of the material. Additionally, it can also serve as a useful reference for students as they review for exams or complete homework assignments.
learn more about chemistry here:
https://brainly.com/question/13428382
#SPJ4
At constant pressure which of these systems do work on the surroundings? Check all that apply.a. A(g) + B(g) → C (g)b. 2A (g) + B(g) → C (g)c. A (g) + B(g) → 3C (g)d. A(s) + B(g) → 2C(g)
At constant pressure the one of these systems do work on the surroundings is the : C) A(g) + B(g) ----> 3C.
The reaction is :
A(g) + B(g) ----> 3C
The number of the moles of gaseous reactants :
n = 1 + 1 = 2
The number of the moles of gaseous of the products :
n = 3
Δn = 3 - 2 = 1
The work done is given as :
W = -Δn RT
W = - RT
Thus, the work is negative , so the systems do work on the surroundings. Therefore the system that works on the surroundings is the correct option is C) A(g) + B(g) ----> 3C.
To learn more about work here
https://brainly.com/question/14050190
#SPJ4
when water changes from solid to liquid, the h2o particles present in the solid form become h2o particles in the liquid form. during this process there is in the chemical composition of the substance. this is defined as a(n) change.
Because HNO3 is a potent acid, it totally ionizes to produce the H+ and NO3- ions. Phenolphthalein's base color is pink, while its acid color is less colorful. ·
Which of the following describes hno3's characteristics?Nitric acid (HNO3) is an industrial chemical used in the production of fertilizers and explosives. It is a colorless, fuming, and extremely corrosive liquid with boiling and freezing points of 83 and 42 degrees Celsius, respectively. It is poisonous and can result in serious burns.
HNO3 undergoes what kind of reaction?Neutralization is a chemical process that happens when an acid is put to a base. Nitric acid, HNO3, reacting with the basic potassium hydroxide, KOH, is one example.
To know more about phenolpthalein visit:
https://brainly.com/question/1405327
#SPJ4
HNO3 is a strong acid, therefore it completely ionizes to form the ions H+ and NO3-. The acid hue of phenolphthalein is less vibrant and has a pink base tone.
If any of the following best sums up the traits of hno3?An industrial chemical called nitric acid (HNO3) is used to make explosives and fertilizers. It has a boiling point of 83 degrees Celsius and a freezing point of 42 degrees Celsius. It is a translucent, fuming, and exceedingly corrosive liquid. It is noxious and highly burning.
What sort of reaction occurs with HNO3?When such an acid is added to a base, a chemical reaction called neutralization takes place. One example is the reaction of nitric acid (HNO3) and the basic caustic soda (KOH).
To know more about phenolpthalein visit:
brainly.com/question/1405327
#SPJ4
At 700 K, CCl4 decomposes to carbon and chlorine. The Kp for the decomposition is 0.76.Find the starting pressure of CCl4 at this temperature that will produce a total pressure of 1.2 atm at equilibrium.P=?
The starting pressure of CCl₄ at this temperature that will produce a total pressure of 1.2 atm at equilibrium pressure P is 0.69atm.
In terms of pressure, what is equilibrium constant?It is described as the ratio of the partial pressures of the reactants to those of the products, both raised to a power that is equal to the coefficients of the respective reactants and products in a balanced chemical equation. This indicates by Kp.
CCl₄ ⇄ C (s) + 2Cl₂
Initial p 0 0
equilibrium p-x 0 2x
Total pressure at equilibrium = p - x + 2x = p + x = 1.2---eq(1)
Kp = 076 = Pc ×P²cl/Pccl₄
Kp = 0×(2x)²/p-x
Kp = 4x²/p-x ---eq(2)
Solving equation (1) and (2). we get x = 0.51
p + x = 1.2
p = 1.2 - 0.51 = 0.69 atm
The starting pressure of CCl₄ is 0.69 atm.
To know more about pressure visit:
https://brainly.com/question/3329450
#SPJ4
The chemical reaction that causes aluminum to corrode in air is given by
4Al+3O2?2Al2O3
in which at 298 K
?Hrxn? = ?3352 kJ
?Srxn = ?625.1 J/K
What is the standard Gibbs free energy for this reaction? Assume the commonly used standard reference temperature of 298 K?
What is the Gibbs free energy for this reaction at 5975K ? Assume that ?H and ?S do not change with temperature.
At what temperature, Teq, do the forward and reverse corrosion reactions occur in equilibrium?
This reaction has a standard gibbs free energy of 3538.2798 kJ. The reaction's Gibbs free energy at 5975 K is 7086.97 kJ.
What is gibbs free energy?The Gibbs free energy is a thermodynamic potential in thermodynamics that can be used to determine the maximum amount of work that a thermodynamically closed system is capable of performing at constant temperature and pressure.
Here,
The formula for the gibbs free energy is:
ΔG° = ΔH° - T * ΔS°
⇒with ΔG° = the gibbs free energy for this reaction = TO BE DETERMINED
⇒with ΔH° = the standard enthalpy of the reaction =3352 kJ
⇒with T = the temperature of the reaction in Kelvin = 298 K
⇒with ΔS° = standard entropy of the reaction = 625.1 J/K
ΔG° = 3352 kJ - 298 K* (0.6251 kJ/K)
ΔG° = 3352 kJ + 186.28kJ
ΔG° = 3538.2798 kJ
Gibbs free energy for this reaction at 5975K,
ΔG° = 3352 kJ - 5975K* (0.6251 kJ/K)
ΔG° = 3352 kJ + 3734.97kJ
ΔG° =7086.97 kJ
The standard gibbs free energy for this reaction is 3538.2798 kJ. Gibbs free energy for this reaction at 5975K is 7086.97 kJ.
To know more about gibbs free energy,
https://brainly.com/question/15565959
#SPJ4
Translate the given conformer from the wedge-and-dash drawing into its Newman projection. (Hint: first decide whether the confirmation is staggered or eclipsed) Select the correct Newman projection below, and drag the three groups (X, Y, and Z) to their correct locations.
The given conformer from the wedge-and-dash drawing into its Newman projection is attached below.
What is Newman projection?With the front atom represented by the point where three lines intersect (a dot) and the back atom represented by a circle, a Newman projection shows how a chemical bond will behave from front to back. The front atom is referred to as proximal, and the back atom as distal.
With a line representing the front atom and a circle representing the back carbon, the Newman projection, which is helpful in alkane stereochemistry, shows how a chemical bond will behave from front to back. It is referred to as proximal for the carbon atom in the front and distal for the one in the back.
To know more about Newman projection visit:
https://brainly.com/question/24608677
#SPJ4
Complete question is attached below.
a. What is the electron-domain (charge-cloud) geometry of BrF5? Enter the electron-domain geometry of the molecule.
b. What is the molecular geometry of BrF5?
c. Ignoring lone-pair effects, what is the smallest bond angle in BrF5?
d. Which choice best describes the polarity of BrF5?
The molecule is polar and has polar bonds.
The molecule is nonpolar and has polar bonds.
The molecule is polar and has nonpolar bonds.
The molecule is nonpolar and has nonpolar bonds.
(a) Electron domain geometry - Octahedral. (b) Molecular geometry - Square pyramidal. (c) Smallest bond angle - 90° (d) The polarity of BrF₅, best choice is: The molecule is polar and has polar bond. (e) AsH₃ is polar molecule.
A molecule's valence shell electrons are shown in a very simple manner via a Lewis structure. It serves as a visual representation of how the electrons surrounding certain molecules' atoms are positioned.
It demonstrates the bonds that exist between a molecule's atoms and its lone pairs of electrons. When used in conjunction with hybrid orbitals, Lewis structures can also be helpful in predicting molecular geometry.
(a) Electron domain geometry - Octahedral.
(b) Molecular geometry - Square pyramidal.
(c) Smallest bond angle - 90°
(d) The polarity of BrF₅, best choice is: The molecule is polar and has polar bond.
(e) AsH₃ is polar molecule.
Your question is incomplete most probably your full question was
a. What is the electron-domain (charge-cloud) geometry of BrF5? Enter the electron-domain geometry of the molecule.
b. What is the molecular geometry of BrF5?
c. Ignoring lone-pair effects, what is the smallest bond angle in BrF5?
d. Which choice best describes the polarity of BrF5?
The molecule is polar and has polar bonds.
The molecule is nonpolar and has polar bonds.
The molecule is polar and has nonpolar bonds.
The molecule is nonpolar and has nonpolar bonds.
e. Of the molecules below, only ________ is polar.
H2
SiS2
CH4
AsH3
PF5
To know more about geometry refer to:
brainly.com/question/20274710
#SPJ4
balance the following sodium borohydride reduction equation below.
Therefore, C₁₄H₁₀O₂ + NaBH₄ = C₁₄H₁₄O₂ + Na₂ + B₄ is the balanced equation for sodium borohydride reduction.
Why is sodium borohydride used?Aldehydes, ketones, or acid chlorides can be reduced using sodium borohydride when other easily reducible functional groups are present. 32 The solvents employed for the reduction are indicative of sodium borohydride's comparatively low reactivity. converts ketones and aldehydes to the corresponding alcohols. Esters, epoxides, lactones, carboxylic acids, nitro compounds, and nitriles are not reactive to sodium borohydride; nonetheless, it decreases acyl chlorides.
What is sodium borohydride made of?In chemistry, sodium borohydride is a widely used reducing agent. Its formula is NaBH4, and its constituent elements are sodium (Na), boron (B), and hydrogen (H). Since it is a safer reagent for reduction than other options, it is frequently employed in chemistry labs. NaBH4 is primarily utilised in the production of Na2S2O4 (sodium dithionite), a bleaching agent for wood pulp that is also used to convert aldehydes and ketones to alcohols, from SO2.
To know more about Sodium Borohydride visit:
https://brainly.com/question/28563915
#SPJ4
A small generic section of the primary structure of an a helix is given below. ?amino acid1 ?amino acid2 ?amino acid3 ?amino acid4 ?amino acid5 ?amino acid6 ?amino acid7? (a) Which amino acid residue?s backbone forms a hydrogen bond with the backbone of the sixth (6th) residue? Choose the correct residue from the drop-down menu. amino acid Select answer (b) Which of the following peptide segments is most likely to be part of a stable a helix at physiological pH? (c) How many hydrogen bonds can be formed within the backbone of 7 residues? Do not count the hydrogen bonds between this section and outside the section.
The an alpha helix amino fundamental structure Amino acid 1 two amino acids acid three −Glu−Leu−Ala−Lys−Phe− is the answer and three hydrogen bonds with water.
What are amino acids from helix?On a polypeptide chain, a -helix is a correct helix of amino-acid residues that normally has between 4 & 40 residues. The oxygen of the top coil (C=O) and the protons of the bottom coil (N-H) form hydrogen bonds that keep this coil together.
What makes proline the "helix breaker"?Alpha-helical and beta-sheet architectures of soluble (globular) proteins are known to be easily broken by the amino acid proline. This creates a structural conundrum because the Pro residue is frequently found in the presumed transmembrane helices of membrane proteins, deliver excellent proteins.
To know more about helix amino visit:
https://brainly.com/question/14775670
#SPJ4
at a certain temperature, the solubility of n2 gas in water at 2.04 atm is 48.0 mg of n2 gas/100 g water . calculate the solubility of n2 gas in water, at the same temperature, if the partial pressure of n2 gas over the solution is increased from 2.04 atm to 6.00 atm .
According to henry's law, The solubility of n2 gas in water, at the same temperature is, 141 mg/100 g water.
What qualities make up solubility?The maximum amount of a chemical which will dissolves in a volume of solvent at a given temperature is referred to as its solubility. Varying compounds have quite different solubilities, which is a characteristic of a specific solute-solvent pair.
Henry's Law says that the solubility of a gas is directly proportional to the pressure so:
S1/P1 = S2/P2
48 mg/100g / 2.04 atm = S2/6 atm
S2 = 141 mg/100 g water
solubility of n2 gas is 141 mg/100 g water
To know more about solubility visit :
https://brainly.com/question/9098308
#SPJ4
