Questions 1-10: Complete the Bohr
Mode for each following elements.

The substance has a molar mass of 122.11 g/mol, an empirical formula of C2H5O2, and a molecular formula of C4 H10 O4.

We can determine the relative atomic ratios in a compound using an empirical formula.

The ratios also hold true at the molar level. H2O is made up of two hydrogen atoms and one oxygen atom.

The same is true for the mole of H2O, which is made up of 1.0 moles of oxygen and 2.0 moles of hydrogen.

Example: The chemical structure of glucose is C6H12O6. Every mole of carbon and oxygen is accompanied by two moles of hydrogen.

Glucose has the empirical formula CH2O.

Ribose has the chemical formula C5H10O5, which can be simplified to the empirical formula CH2O.

To learn more about empirical formula , refer

https://brainly.com/question/14854985

#SPJ4

1 molecule of glutamate can form 7.6 ATP can be formed by oxidative phosphorylation .

In the process of oxidative phosphorylation, oxygen is consumed as electrons are transferred through the mitochondrial electron transport chain and ATP is produced.

The bulk of the ATP required for higher animals and plants to sustain life is produced by oxidative phosphorylation, which is also in charge of creating and preserving metabolic equilibrium.

The glutamate carrier recycles glutamate outside of mitochondria (T9). One aspartate and 7.6 ATP are made at the best return for each glutamine.

To learn more about oxidative phosphorylation, refer to the below link:

https://brainly.com/question/25765324

#SPJ4

The ratio of the deprotonated form to protonated form is 1 : 100.

Henderson–Hasselbalch equation: pH = pKa + log(cs/ck)

pH = 4.75; pH of buffer solution

pKa = 6.75

4.75 = 6.75 + log(cs/ck)

log(cs/ck) = 4.75 - 6.75 = -2.0

cs/ck = 10⁻² = 0.01; ratio of the deprotonated form to protonated form

A buffer can be defined as a substance that prevents the pH of a solution from changing by either releasing or absorbing H⁺ in a solution.

Buffer is a solution that can resist pH change upon the addition of an acidic or basic components and it is able to neutralize small amounts of added acid or base, pH of the solution is relatively stable.

More about buffer: brainly.com/question/4177791

#SPJ4

When water molecules interact, the positively charged hydrogen end of one molecule is attracted to the negatively charged oxygen end of another molecule.

Hydrogen bonding is a type of dipole-dipole attraction between molecules, it was not all the time that a covalent bond to a hydrogen atom.

The attractive force will be very strong between a hydrogen atom and the electronegative atoms i.e., N, O, or F atom, etc., as it was covalently bonded to electronegative atom.

Any molecule that has a hydrogen atom directly attached to an oxygen or nitrogen atom is capable of hydrogen bonding. When hydrogen is bonded to fluorine, the attraction of covalent bond was very well.

So, When water molecules interact, the positively charged hydrogen end of one molecule is attracted to the negatively charged oxygen end of another molecule.

Thus, the answer is positively and negatively respectively.

Learn more about Hydrogen bonding,

https://brainly.com/question/10904296

#SPJ4

The molecular geometry is seesaw.

The molecule has the seesaw geometry when it has the central atom with four single bonds with other atoms and one lone pair of electrons (AX4E1 in AXE notation).

VSEPR theory (The Valence Shell Electron Pair Repulsion Theory) uses the AXE notation.

The seesaw geometry is similar to a trigonal bipyramid.

Difference is that in the seesaw geometry one of the atoms is replaced by a lone pair of electrons.

A lone pair of electrons in the seesaw geometry is always in an equatorial position (see the picture below).

Some examples of the molecules with seesaw geometry are sulfur tetrachloride (SF4) and sulfur tetrafluoride (SF4).

More about bond angles: brainly.com/question/25425872

#SPJ4

The name of the CO32 polyanion is Carbonate.

It frequently appears in limestone. It is found bonded to metals in groups I and II of the periodic table because it cannot exist on its own. The name of the metal to which the compound is bonded is given first, followed by the word carbonate, as in calcium carbonate, sodium carbonate, and so forth. Calcite, also known as limestone, and dolomite, also known as dolostone, are the two different types of carbonates.

Calcite, aragonite, and dolomite are the three groups of common anhydrous (water-free) carbonates that are separated based on their different structural types. The only notable hydrous types are the copper carbonates azurite and malachite.

Anything with more than one negatively charged anion. Any compound with multiple anion moieties, particularly one that is based on a polymer.

To know more about polymer :

https://brainly.com/question/14600435

#SPJ9

The solubility of barium carbonate, BaCo₃ is 4.5 x 10⁻⁵ M.

To find the solubility, the given values are,

Ksp = 2.0·10⁻⁹.

Here, s(BaCO₃) = ?M.

In chemistry, Solubility is the ability of a substance, the solute, to form a solution with another substance, the solvent.

Formula for solubility is,

                           Ksp = [A^+]^a [B^-]^b

Ksp = solubility product constant

A^+ = cation in an aqueous solution

B^- = anion in an aqueous solution

a, b = relative concentrations of a and b

The Chemical reaction of Barium carbonate is :

BaCO₃(s) → Ba²⁺(aq) + CO₃²⁻(aq).

s(BaCO₃) = s(Ba²⁺) =s(CO₃²⁻) = x.

Ksp = s(Ba²⁺) · s(CO₃²⁻).

Ksp = x · x.

2.0·10⁻⁹ = x².

x = √2.0·10⁻⁹

  = 4.47x10⁻⁵ M.

So, The solubility of Barium carbonate is 4.5x10⁻⁵ M.

Hence, Option D is the correct answer.

Learn more about Solubility,

https://brainly.com/question/28170449

#SPJ4

Answer:

Structure:

Differences-  A polymer is a collection of a large number of molecules whereas a monomer is a single molecule.

A monomer is a single molecule, which has the ability to chemically bond with other monomers in a long chain. A polymer is a chain that is made when monomers bind with other monomers.

Similarities-  They are both molecules

Properties:

Differences- Monomers have polyfunctionality, which is the capacity to form chemical bonds to at least two other monomer molecules. Polymers are chemically unreactive, solids at room temperature, malleable, tough, and are electrical insulators.

Similarities- They both makeup larger forms of matter.

Intermolecular Forces

Differences: Polymers are held together by covalent bonds, hydrogen bonds, and dispersion bonds. Monomers are only held together by hydrogen bonds.

Similarities: They can both be bonded together by hydrogen bonds.

The expected value of the total volume of the liquuid in the test tube is 23 mL

From the question given above, the following data were obatined:

The total volume of the liquid in the test tube can be obtained by adding the volume of the red liquid and the volume of the liquid in the test tube together. This is illustrated below:

Total volume = Volume of red liquid + volume of liquid in test tube

Total volume = 14 + 9

Total volume = 23 mL

Thus, we can conclude that the expected value of the total volume of the liquid is 23 mL

Learn more about volume:

https://brainly.com/question/9523268

#SPJ1

The average  atomic mass of the element = 14.0135 amu and the element is Nitrogen

14.00 × 98.632 % + 15.00 × 1.3668 %

= 1,401.35 %

average atomic mass = [tex]\frac{1401.35}{100}[/tex]

             = 14.0135 amu

Isotopes are part  of a family of an element that  have all  the same number of protons but different numbers of neutrons. The number of protons in a nucleus defines the element's atomic number on the Periodic Table.  Taking example, carbon  is having  six protons and it's atomic number 6.

The average atomic mass (generally known as  atomic weight) of an element is the weighted average mass of the atoms in a naturally participating  sample of the element. Average masses are generally determined  in unified atomic mass units (u), where 1 u is equal to one-twelfth of  the mass of a neutral atom of carbon-12.

Learn more about atomic mass :

brainly.com/question/24666479

#SPJ9

Explanation:

b) .000035

f) .000005

g) .000000009823

i) .00026

j) 800000000

The empirical formula of the compound is [tex]CH_{4}N[/tex].

We calculate the empirical formula by calculating the mass of every individual element in the compound and then calculating the corresponding moles.

0.458 g CO2 / 44 g/mol = 0.0104 mol ⇒ 0.0104 mol of C ⇒ 0.0104 mol x 12 g/mol = 0.125 g of C

0.374 g H2O / 18 g/mol = 0.0208 mol ⇒ 0.0416 mol of H ⇒ 0.0416 mol x 1 g/mol = 0.0416 g of H

0.486 g : 0.226 g = 0.312 g : X

X = 0.145 g of N

0.145 g / 14 g/mol = 0.0104 mol of N

0.0104 mol of C
0.0416 mol of H
0.0104 mol of N

When divided by 0.0104 mol, we get the C : H : N ratio of 1 : 4 : 1, giving us the empirical formula of [tex]CH_{4}N[/tex].

You can learn more about empirical formulas here:
brainly.com/question/14425592

#SPJ4

Molecules which increase neurotransmitter formation and release are termed as calcium.

The release of neurotransmitter molecules is triggered by an increase in calcium. When a neuron becomes depolarized and reaches a threshold, it sends an electrical signal called the action potential down the axon. When the action potential reaches the terminal, voltage gated calcium channels open. This causes an influx of calcium, which binds to proteins and allows the fusion of neurotransmitter-filled vesicles with the membrane. This results in the release of increased level of neurotransmitter into the synapse, where it can cause changes in the postsynaptic cell.

What are Neurotransmitters?

Neurotransmitters are chemicals that neurons release in order to communicate with other neurons or effector tissues such as muscle. There are various types of neurotransmitters, each with a unique effect on the postsynaptic cell.

Find more on neurotransmitters at : brainly.com/question/26387085

#SPJ4

Density = mass/volume

  ρ=[tex]=m/v[/tex]

density = 4.726/128.9

density = 0.0366 g/cm3.

The term "density" refers to the quantity or mass per unit of volume in a particular substance. Mass divided by volume is the formula for calculating density.

Absolute density and relative density are the two main types of density. Relative density, also known as specific gravity, is the ratio of a substance's density to the density of a reference material. The reference substance is often water.

The formula to calculate density is the mass of an object divided by its volume. The standard units are kg/m3.

To learn more about density from the given link:

brainly.com/question/15164682

#SPJ4

Sample methane gas of contains more hydrogen atoms at STP.

At STP a 22.4 liter sample of gas contains the same number of molecules as one mole.

At standard temperature and pressure 1 mol of gas occupied 22.4 liters.

Vm = 22.4 L/mol; molar volume at STP (Standard Temperature and Pressure).

V(CH4) = 1 L; volume of methane gas

n(CH4) = V(CH4) ÷ Vm.

n(CH4) = 1 L ÷ 22.4 L/mol.

n(CH4) = 0.045 mol; amount of methane

In one methane molecule, there are four hydrogen atoms.

n(H) = 4 × 0.045 mol

n(H) = 0.18 mol; amount of hydrogen atoms in 1 liter of methane

n(H2) = 1 L ÷ 22.4 L/mol.

n(H2) = 0.045 mol; amount of hydrogen molecule

In one hydrogen molecule, there are two hydrogen atoms.

n(H) = 2 × 0.045 mol

n(H) = 0.090 mol; amount of hydrogen in 1 liter of hydrogen gas

More about STP: brainly.com/question/18914403

#SPJ4

This rule is used to quickly determine protonation, and hence charge state, and is extremely important to know (and easy to derive).

In many stoichiometric and catalytic reactions, protonation—a fundamental chemical reaction—takes place as a first step. Many biological macromolecules, including certain ions and molecules that can undergo more than one protonation, are classified as polybasic. Most acid-base reactions result in protonation and deprotonation (the removal of a proton), which are at the center of most theories relating to these reactions.

An element that protonates another element is referred to as a Brnsted-Lowry acid. In some analytical processes, such as electrospray mass spectrometry, protonation of a substrate is a necessary step since it causes the species' mass and charge to both increase by one unit. In addition to changing the charge and mass of a molecule or ion, protonation and deprotonation can also alter many other chemical properties.

To learn more about protonation from the given link:

https://brainly.com/question/15215343

#SPJ4

The ph of the resulting solution Ka = 1.8x10-5 /0.036-x

The e letters pH stand for the potential of hydrogen since pH is effectively a measure of the concentration of hydrogen ions.

a solution is a special type of homogeneous mixture composed of two or more substances.

3 ml x 3.00 M = 250 ml * x M

x = 0.036 M HAc

Ka = 1.8x10-5 /0.036-x

For more information on ph click on the link below:

https://brainly.com/question/22390063

#SPJ4

The pH of given  solution is 8.77. It can be calculated by the pka value of NH₄/NH₃ and molar concentrations of both the ionic compounds.

A solution containing 0.12 NH₄Cl and 0.03 moles of NaOH undergoes a reaction in which NaOH reacts with NH₄Cl to form NaCl, producing NH₃ and H₂O.

NH₄Cl + NaOH = NH₃ + NaCl + H₂O

The pH is therefore equal to the sum of the pKa and the logarithm of the base concentration divided by the acidity. In both cases the base concentration is 0.03 molar. When sodium hydroxide is added, 1 mole of ammonia is produced for each mole added. The result is less ammonium with each addition of hydroxide.

This is how we come to a solution.

pH = pKa + log [base]/log [acid]

pH = 9.25 + log 0.03/log 0.12

pH = 8.77

To learn more on Calculation of pH, please refer:

Brainly.com/question/28343443

#SPJ4

The weight of the column is 1273.85 pounds.

r = 370 mm/2 = 185 mm

r = 0.185 m; a radius of a concrete column

l = 2.2 m; a length of a concrete column

d = 2.45 Mg/m³; density of a concrete

V = r² × π × l

V = (0.185 m)² × 3.14 × 2.2 m

V = 0.236 m³; volume of a column

m = d × V

m = 2.45 Mg/m³ × 0.236 m³

m = 0.578 Mg

1 Mg = 1000 kg

m = 578.2 kg; mass of concrete

W = 578.2 kg × 9.8 m/s²

W = 5666.36 N

W = 5666.36 N × 0.225 Ibf/N

W = 1273.85 Ibf; weight of a concrete

The weight of an object is the amount of force acting on the object due to gravity. SI unit for weight is newton (N).

More about weight: brainly.com/question/17306051

#SPJ4

0.8 is the density of an unknown gas in g/l that has a volume of  10.9 l and  has a mass of 8.72 g.

What is density?

The definition of a material's density is the mass per unit volume of that substance. The ratio of mass to volume is known as density, or mass per unit volume. It calculates an object's material content in relation to its volume (cubic metre or cubic centimeter). Density is essentially a measurement of how tightly matter is packed.
Mass of the unknown gas = 8.72g

Volume of the gas = 10.9 l

Density of the gas = mass/volume = 8.72/10.9 g/l = 0.8g/l.

Thus, An unidentified gas with a volume of 10.9 l and a mass of 8.72 g has a density of 0.8 in g/l.

To learn more about density from the given link below,

https://brainly.com/question/18019548

#SPJ4

No chemical reaction occurs on combination of sodium sulfate and iron (III) nitrate.

This chemical reaction does not occur since none of the products are solids, insoluble gases, or water. Just aqueous iron (III), sodium, nitrate and sulfate ions are present.

Thus, iron (III) nitrate and sodium sulfate do not interact.

One or more substances, known as reactants, are changed into one or more new substances, known as products, during a chemical reaction. Substances are made up of chemical components or chemical elements. The atoms that constitute the reactants of a chemical reaction are rearranged to create different products.

Combustion, decomposition, neutralization, redox, precipitation or double-displacement, and synthesis are some of the numerous types of chemical reactions that can occur depending on the product that is produced.

Learn more about Chemical reactions here:

https://brainly.com/question/12276877

#SPJ4

A+bare+helium+nucleus+has+two+positive+charges+and+a+mass+of+6.64+10-27+kg.+  7.57×105 eV.

When you look at a photograph of a cell, the nucleus is among the elements that is most evident. The nucleus, located in the centre of the cell, is home to all of the chromosomes, which are responsible for encoding the genetic material. Consequently, it is crucial to safeguard this area of the cell.

The membrane that surrounds the nucleus maintains all of the chromosomes inside and distinguishes between the chromosomes being inside the nucleus and the other organelles and parts of the cell remaining outside. There are pores in the nuclear membrane that enable molecules to enter and exit the nucleus as necessary, such as when RNA needs to move between the nucleus and the cytoplasm.

to learn more about nucleus from the given link:

https://brainly.com/question/141626

#SPJ4

The wasteful side reaction of o2 with rubisco takes place under increased temperature and intense light conditions.

In the Calvin cycle, photorespiration refers to the chemical reaction that takes place between enzyme rubisco and oxygen by using ATP under light conditions and increased temperature.

The resultant products of this reaction are phosphoglycolate and PGA.

Moreover, phosphoglycolate and PGA can not be utilized for the synthesis of RUBP instead these newly manufactured compounds are processed into a 3-PGA reaction to continue the Calvin cycle where they are consumed to generate glycolate which is ultimately transformed into glycerate.

To put it simply, photorespiration is a reaction in which oxygen combines with rubisco to form 3-PG and 2 phosphoglycolates.

If you need to learn more about rubisco click here:

https://brainly.com/question/13735126

#SPJ4

In Dalton Theory  the atom of the same element has same mass found also wrong because some elements show different atoms having different masses.

That postulate of the Dalton atomic theory was changed that atom is indivisible particle and can be subdivided into smaller particles was later changed and then this statement comes forward that because the atoms can be divided into three more particles which are electron, proton and neutron.

1. The first statement of the Dalton's theory got wrong because due to the indivisibility of the atom.

2. The atom is the smallest particle also found wrong because the atom is further divided in the proton, electron and neutron.

3. The atom of the same element has same mass found also wrong because some elements show different atoms having different masses.

So we can conclude that in Dalton theory  the atom of the same element has same mass found also wrong because some elements show different atoms having different masses.

Learn more about Dalton Atomic Model here: https://brainly.com/question/13157325

#SPJ1

The number of seconds in a 40-hour work week can be  c. 40 h x

You work a regular 40-hour workweek (eight hours a day).

That persisted up until 1926, when Henry Ford let his workers off the hook for one day of obligatory labour. Eight-hour days and six-day weeks totaled 48 hours of labour each week for Ford employees. The 40-hour workweek, as it is currently known, was created by eliminating one day and replacing it with five days of eight-hour shifts.

Four nine-hour days followed by an eight-hour Friday is the most typical pattern for doing this. The next week consists of four nine-hour days and a Friday off.

A full-time employee is one who works an average of at least 30 hours per week for the duration of a calendar month in order to qualify under the employer shared responsibility laws.

learn more about  40-hour workweek refer

https://brainly.com/question/14241463

#SPJ4

The speed of the fluid in the pipe through the cross-section of 0.105 m² is 5.21 m/s.

The area of the first cross-section is A1.

A1 = 0.70 m²

The area of the second cross-section is A2.

A2 = 0.105 m²

The velocity of the fluid at the first cross-section is V1.

V1 = 3.50 m/s

Let the velocity of the fluid at the second cross-section be V2.

The speed of the fluid in the pipe through the cross-section of 0.105 m² is,

Area of the first cross-section × Velocity of the fluid through the first cross-section = Area of the second cross-section × Velocity of the fluid through the second cross-section

A1 × V1 = A2 × V2

0.070 × 3.50 = 0.047 × V2

[tex]V2 = \frac{0.070 × 3.50}{ 0.047} [/tex]

= 5.21 m/s

Therefore, the speed of the fluid in the pipe through the cross-section of 0.105 m² is 5.21 m/s.

To know more about velocity, refer to the below link:

https://brainly.com/question/16379705

#SPJ4

It is the name given to the combination of strong and weak nuclear forces.

We know that the nucleus of the atom is the place that houses the greatest amount of energy. We could obtain the highest energy by ripping open the nucleus of an atom. There is a huge energy that holds the particles in the nucleus together and this called the nuclear binding energy.

This energy must also be required to break the nucleus as is the case in the operation of the atomic bond and in nuclear reactors. The true statement about the nuclear energy is that; It is the name given to the combination of strong and weak nuclear forces.

Learn kore about nuclear energy:https://brainly.com/question/2240073

#SPJ1

C₁₂H₁₂BrO₁N₁ is the molecular formula.

An analytical technique used to measure the mass to charge ratio of the ions is known as mass spectrometry. This is one of the best technique used to analyse the structure of a molecule.  It is used in a a lot of applications such as carbon dating, food contamination detection, isotope detection, protein identification etc.

We have given that,

molecular ion at 265 m/z

another ion seen at 267 m/z

their ratio is 1:1

C₁₃H₉Cl₂ON₁ in this in here Cl have two isotopes that are

36 and 37 but   m/z is not equal to 265

in here C₁₂H₁₂BrO₁N₁  Br have  two isotopes

Br-79,  Br-81 and  m/z equals to 256 and 257

so the molecular formula is therefore  C₁₂H₁₂BrO₁N₁

Learn more about mass spectrum here https://brainly.com/question/14700447

#SPJ4

your question is incomplete, below you will find the missing content

here the options are not given, so options are

a. C₁₃H₉Cl₂ON₁ b. no isotopic atom  c. C₁₂H₁₂BrO₁N₁