Receptacle is defined as a point in
the electrical system where
electrical energy is
A. Uninstalled
C. Installed
B. Supplied for electrical use
D. Supplied for direct wiring

Answer:

a=2 m/s²

Explanation:

v=u+at

25=15 +5a

5a=10

a=2 m/s²

The correct option B) The object continues to roll without slipping, and the actual force of static friction doesn't change.

When an object experiences static friction, its frictional force resists any applied force, causing the object to stay at rest until the static frictional force is removed. The frictional force opposes an object's motion in kinetic friction.

When an object and surface have twice as much friction as is required to prevent slippage, the object rolls onto the surface without slipping.

Thus, the ensuing motion is that the object keeps rolling without slipping, and the static friction's actual force remains constant.

To know more about the static friction, here

https://brainly.com/question/13680415

#SPJ4

option b) dorsal ramus of a spinal nerve, is correct answer.

Describe the spinal nerve.

In order to modulate motor and sensory information from the body's periphery, spinal nerves, which are mixed nerves, directly communicate with the spinal cord. Each nerve is made up of fila radicular, or nerve fibers, that originate from the ventral and dorsal roots of the spinal cord.

What are the functions of spinal nerves?

Between your brain, spinal cord, and the rest of your body, your spinal nerves transmit electrical messages. You may move your body and perceive feelings thanks to these electrical nerve signals (sensory nerve) (motor nerves).

What 31 spinal nerves are there?

There are 31 pairs in humans, including 8 cervical, 12 thoracic, 5 lumbar, 5 sacral, and 1 coccygeal. Each pair joins a certain part of the body to the spinal cord. Each spinal nerve splits into two roots close to the spinal cord.

To know more about Spinal nerves visit:

https://brainly.com/question/29803860

#SPJ4

The simple machines that are used in the tool or device include all of the following:

In Science, a simple machine can be defined as a type of machine that is designed and developed with no moving parts, but can be used to perform a specific work.

Additionally, there are six (6) simple machines and these include the following;

Generally speaking, a simple machine allows for the transformation of energy into work.

Read more on simple machine here: https://brainly.com/question/28750066

#SPJ1

The gravitational force is inversely proportional to the distance from the surface of earth. Thus, value of g will be lower at higher altitudes.

Gravitational force is a kind or force by which an object attracts other objects into its center of mass. It is dependent on the mass of the objects and distance between them.

According to the law of universal gravitation, the force of gravitation g is written as:

g = Gm/ r²

Here. m is the mass, G be the gravitational constant and r be the distance from the surface.

Thus, as per this equation g is inversely proportional to the square of the distance from earth's surface. Therefore, at higher altitudes, the gravity will be slightly lower,

To find more on gravitational force, refer here:

https://brainly.com/question/12528243

#SPJ1

The amount of seconds elapse for the distant observer will be 16.66sec.

To understand more about neutron star -

https://brainly.com/question/28271936

#SPJ4

The magnitude of their gravitational force of attraction is: GM² /(4R²)

The gravitational force, which is what pushes mass-containing objects toward one another. Gravitational pull from Earth is a topic that we frequently consider. Body is held firmly in place by this force. However, every mass-bearing item pulls everything else with mass toward it through gravity.

Mass M = M

radius R = R

Separation of the two centers of the spheres when they are touch each other, r = 2R

Thus, the magnitude of their gravitational force of attraction,

F = GMM/r²

or, F = GM² /(2R)²

or, F = GM² /(4R²)

To know more about gravitational force refer to:

https://brainly.com/question/24783651

#SPJ1

In the problem, it was stated that "a box of mass m slides at a speed v along a horizontal, smooth table", the word "smooth" allow us to assume that the table is frictionless.

Frictionless surface is a surface with little to almost none friction. Frictionless surface alllows the force acting on any object which makes it difficult fo the object to slide or the friction force is almost zero or negligible. In the real world, there is no such a thing called frictionless surface, artificially the smoothest surface will have some friction at some locations.

Friction force is the force that opposes the sliding movement of an object accross another object or surface. The friction force direction will always be the opposite of the motion of an object. Friction force can be divided into 2 kinds:

Static friction is the friction force working on an object when an object is not moving. Static friction keeps an object stay still and resists any force working on an object. However, when the force given to an object increase and the object start to move, static friction is no longer working in the system.

Kinetic friction is the friction force working on an object when an object is moving. Kinetic friction allows an object to slow down when the force is released.

Generally, static friction is greater than kinetic friction.

Learn more about Friction Force here: https://brainly.com/question/1714663

#SPJ4

Complete Question:

In this problem, we will consider the following situation as depicted in the diagram (Figure 1) : A block of mass m slides at a speed v along a horizontal, smooth table. It next slides down a smooth ramp, descending a height h, and then slides along a horizontal rough floor, stopping eventually. Assume that the block slides slowly enough so that it does not lose contact with the supporting surfaces (table, ramp, or floor).

You will analyze the motion of the block at different moments using the law of conservation of energy.

(Please refer to the diagram below)

Which word in the statement of this problem allows you to assume that the table is frictionless?

Chris puts PPE in order to protect from: chemical, physical, or biological waste site hazards.

What is PPE?

Personal protective equipment (PPE) is protective clothing, helmets, goggles, or other clothing or equipment designed to protect the wearer's body from injury or infection. Hazards encountered by protective equipment include physical, electrical, thermal, chemical, biohazards, and airborne particulate matter. Protective equipment can be worn as part of occupational health and safety and during sports and other leisure activities. Protective clothing is used for traditional clothing categories, and protective clothing applies to items such as pads, guards, shields, masks, etc. PPE suits may resemble cleanroom suits in appearance.

The purpose of personal protective equipment is to reduce employee exposure when engineering and administrative controls are not feasible or effective and to mitigate these risks to acceptable levels. He needs PPE when the danger exists. PPE does not eliminate hazards at their source and has the serious limitation that employees can be endangered in the event of equipment failure.

Therefore, Chris puts PPE in order to protect from: chemical, physical, or biological waste site hazards.

To know more about PPE, visit:

https://brainly.com/question/28178938

#SPJ4

Our understanding of gravity is wrong for great distances  is an alternate explanation of the rotation curve.

Astronomers classify galaxies into three basic categories: elliptic, spiral, and irregular. These galaxies come in a wide range of sizes, from star clusters with as few as 25 million stars to massive galaxies with more than a trillion stars.

Massive gas clouds that collapse + rotate are the starting point for galaxies. Stars develop within them as they develop. The collision of entire galaxies can alter their appearance. We can view planets at earlier stages of evolution by gazing deep into space, which helps us understand how galaxies evolve.

To know more about Galaxies visit:

https://brainly.com/question/14602132

#SPJ4

Hope this Helps ;)

1. Aldebaran/ Alpha Tauri

2. Bootes

3. Hyades

4. Magnitude

5. Polaris

6. Refractor Telescope

7. Luminosity

8. Reflector Telescope

9. Summer

10. Winter

11. Cassiopeia

12. Astrolabe

13. Nebula

The acceleration of the cat to reach its maximum velocity of 10 m/s in 2 seconds is 5m/s².

according to the first equation of motion,

[tex]v-u=a t[/tex]

Given to us

Time is taken by the cat to reach the final velocity = 2 seconds

Final velocity of the cat = 10 m/s

The initial velocity of the cat = 0 m/s

Substitute the values in the equation,

[tex]\begin{aligned}& v-u=a t \\& 10-0=a(2) \\& a=5 \mathrm{~m} / \mathrm{s}^2\end{aligned}[/tex]

What is the velocity?

A vector dimension of the rate and direction of motion. Put easy, velocity is the speed at which something gaits in one direction is called velocity.

To know more about the velocity, visit:-

https://brainly.com/question/121429

#SPJ4

Metals are used for conductors for all of the above conductor applications.

option D is the correct answer.

Metals are excellent conductors of electricity and heat because their atoms form a matrix through which outside electrons can easily move.

Electrical conduction in metals must follow Ohm's Law, which states that the current flowing in an Ohmic conductor is directly proportional to the potential difference across the metal conductors or wires.

V = IR

where;

Metals are used for conductors for the following;

Learn more about metal conductors here: https://brainly.com/question/14667270

#SPJ1

Answer: B) unbalanced forces

Explanation:

        500 N and 600 N are not equal to each other. The two people are also pulling on the chain in opposite directions. Using these given pieces of information, we can decide that the answer is unbalanced forces acting upon the chain.

                 500 N ≠ 600 N

The distance to the cluster is 2.86 billion lightyears. So the correct answer is B. 2.86 billion lightyears.

Distance is a measure of how far apart two objects are from each other. It can be expressed in a variety of units, such as meters, kilometers, miles, or lightyears. In physics and astronomy, distance is often used to describe the separation between two objects in space, such as planets, stars, or galaxies. Distance is an important concept because it helps us understand the size and scale of the universe and how objects within it are related to each other.

To calculate the distance to the cluster of galaxies, we can use the formula:

Distance = (Recessional velocity) / (Hubble constant)

Plugging in the values:

Distance = (60,000 km/s) / (21 km/s/million lightyears)

Distance = 2,857,142.857 million lightyears

Distance = 2.86 billion lightyears

The missing part in the question is shown below.

A cluster of galaxies is observed to have a recessional velocity of 60,000 km/s. find the distance to the cluster. (Assume a hubble constant of 21 km/s per million lightyears).

A. 2.70 billion lightyears

B. 2.86 billion lightyears

C. 1.30 million lightyears

D. 1.26 billion lightyears

Learn more about distance, here https://brainly.com/question/30034748

#SPJ4

The Mass of second cart , speed after impact and speed of Centre of Mass is 110kg , 1.88m/s respectively.

The Center of Mass of an object or system of objects is a location that is specified in relation to those objects. The Center of Mass of a system is the average location of all components that are weighted in accordance with their masses.

The centroid serves as the location of the center of mass for simple rigid objects with uniform densities. The Center of Mass of an object might not always lie over it. The Center of Mass of a uniform disc would be on its Center, whereas the Center of Mass of a ring would be on its Center but without any material.

For complex shapes, the Center of Mass is the singular location where the product of the weighted position vectors of all the components equals zero.

(a) To obtain the mass of the second cart m2, substitute 342 g for mass of first cart m,

1.24 m/s for vii and 0.636 m/s for vir in the equation mm l(Vi- Vid (Vi+

mm [(Vi-Vid (Vi+ Vid]

=342 g [(1.24 m/s-0.636 m/s) (1.24 m/s + 0.636 m/s)]

(342 g103 kg/1 g) [(1.24 m/s -0.636 m/s)/ (1.24 m/s +0.636 m/s)]

0.110 kg

(b) From the above observation, we conclude that, the mass of the second cart would

be 0.110 kg

(c) To obtain the speed of the second cart after impact V26, substitute 342 g for mass of first

cart m, 1.24 m/s for vii and 0.110 kg for m in the equation V2(2m1/ m tma) Vi

V2r277/ m +m2) Vi

=(2(342 g342 g+0.110 kg)) (1.24 m/s)

2342 g(103 kg/1 g)V(342 g (103 kg/1 g) +O.110 kg)] (1.24 m/s)

{2(0.342 kg)/(0.342 kg+0.110 kg)](1.24 m/s)

=1.88 m/s

From the above observation we conclude that, the sped of the second cart after impact v2r would be 1.88 m/s.

To understand more about position vectors -

https://brainly.com/question/14552074

#SPJ4

While lighting the rocket you should ensure D) decreasing the length of the stick

When lighting fireworks, avoid holding them in your hand or placing any part of your body over them. Don't carry fireworks in your pocket since the friction could set them off; instead, use eye protection. Keep pyrotechnics away from flammable objects, such as brush, leaves, and dwellings.

The continuous smoke from cracker explosions may sting or wet the eyes. Because bottle rockets are thought to be the riskiest cracker type, it's crucial to avoid them, keep a safe distance from the burning crackers, wear safety goggles, and avoid wearing contact lenses while popping crackers.

To know more about rockets you may visit the link:

https://brainly.com/question/15061209

#SPJ4

The reactivity phenomenon of self-monitoring procedures has been shown to Option C:both increase desired behaviors and decrease undesired behaviors.

Self-monitoring, a term coined by Mark Snyder in the 1970s, refers to the degree to which individuals keep an eye on how they come across, how they act expressively, and how they act emotionally nonverbally. According to Snyder, human beings generally differ significantly in their capacities and motivations for engaging in expressive controls (see dramaturgy).

Self-monitoring is a personality feature that is used to describe the capacity to control conduct to meet social circumstances. In order to assure proper or desired public appearances, people who are concerned with their expressive self-presentation (see impression management) prefer to pay great attention to their audience. Self-monitors make an effort to comprehend how other people and groups will view their behaviour. Some personality types commonly act spontaneously (low self-monitors) and others are more apt to purposely control and consciously adjust their behavior (high self-monitors).

To learn more about the Self-monitoring Please visit the below link.

https://brainly.com/question/14226475

#SPJ4

In a capacitor, no energy is lost because the capacitor alternately stores charge and then gives it back again.

To know more about circuits visit:

https://brainly.com/question/15088605

#SPJ4

The intensity of the beam is 1.21*10^7  W/m^2 and the intensity is define as number of photons per unit time.

Radiation beam is energy in the form of waves of particles. There are two forms of radiation which are  non-ionizing and ionizing.

Non-ionizing radiation has less energy than ionizing radiation; it does not possess enough energy to produce ions.

Ionizing radiation is capable of knocking electrons out of their orbits around atoms, upsetting the electron/proton balance and giving the atom a positive charge.

Alpha radiation consists of alpha particles that are made up of two protons and two neutrons each and that carry a double positive charge. Due to their relatively large mass and charge, they have an extremely limited ability to penetrate matter.

We know that,

Iabsorbed=P/A ------(1)

where P is the power and A is the area.

P= E/t-------(2)

using (2) and (1)

Iabsorbed=E/tA-----(3)

Now area,

A=πr^2 = 1.19*10^-5 m^2

putting in (3), we get

Iabsorbed = 1.09*10^7 W/m^2

Given only 90% of the beam is absorbed So,

I/100=1.19*10^-5/90

Now the intensity is,

I=1.19*10^-5*100/90

I=1.21*10^7 W/m^2.

To know more about intensity here

https://brainly.com/question/7068958

#SPJ4

If the skier is moving at a speed of 6.0 m/s when she is 2.0 m up the hill,  she will not make it to the top of the hill.

Speed is distance travelled by the object per unit time. Due to having no direction and only having magnitude, speed is a scalar quantity With SI unit meter/second.

According to question,

Speed of the skier: v = 6.0 m/s.

Acceleration due to gravity: g  = 9.8 m/s^2.

Height distance she can move = v²/2g =  1.84 m.

But she have to go (4-2) = 2 m.

So, she can't make it to the top of the hill.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ1

The average kinetic energy of the particles in both objects is now the same.

What is  kinetic energy ?

The energy an item has as a result of motion is known as kinetic energy in physics. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.

The description of the given question is described in the explanation section below.

The metallic temperatures drop as well as the level or temperature of water rises, as the temperature including both water & steel is almost the same, zero heat transfer takes place.

Molecules of liquid (water) will give energy benefit equivalent to either the energy lost via metal. Even before two entities interacted around the same degree they seem to be in thermodynamic equilibrium.

To learn more about kinetic energy  visit:https://brainly.com/question/15764612

#SPJ4

The position versus time graph for a mass on a spring looks like this. What can you tell us about the velocity and the net force at the moment the dotted line appears. Net force is to the right and velocity is zero.

How steep will the location versus time graph and the velocity versus time graph be?

A position graph's slope is a representation of an object's velocity. As a result, the slope's value at a certain moment corresponds to the object's velocity at that moment.

What information about an object's motion is revealed by the slope of a position vs. time graph?

A position-time graph's slope is a measure of velocity. The rate of change of motion increases with slope steepness. A position-time graph can be used to determine average velocity, which is equal to the change in position divided by the corresponding change in time.

To know more about velocity versus time graph visit;

https://brainly.com/question/2695120

#SPJ4

The terms volume flow rate, flow speed, and cross-sectional area are all relevant to this query. Fuel is moving through the nozzle at a speed of 1.09 m/s.

The term "force" has a specific meaning in science. At this level, calling a force a push or a pull is quite appropriate. It is not possible for an item to contain a force. One thing experiences a force from another. These would both be fascinating creatures & non-living items in the conception of a strength.

Energy is a term that represent a bodies natural inclination to change or transform its configuration as both a result about an external entity. When force is applied, the body can also alter shape, size, and direction.

To know more about Force visit;

https://brainly.com/question/13191643

#SPJ4

C-type asteroids correspond to carbonaceous chondrites. S-type asteroids are similar to the most common stony meteorites. M-type asteroids are similar to iron meteorites.

Asteroids are classified into three broad composition classes: C-, S-, and M-types.

The most common asteroids are C-type (chondrite). They are dark in appearance and are most likely made of clay and silicate rocks. They are among the solar system's oldest objects.

The S-types ("stony") are composed of silicates and nickel-iron.

M-types are metallic (nickel-iron). The composition of asteroids changes according to the distance from the Sun. After they formed and partially melted, some experienced high temperatures, with iron sinking to the centre and forcing basaltic (volcanic) lava to the surface.

To learn more about asteroids refer here

https://brainly.com/question/29777540

#SPJ4

The magnitude of the magnetic field at the center of semicircles is

B= ½ [U₀I/2a-U₀I/2b) out= U₀I/4 [1/a – 1/b] out = B

The magnetic field from the circle of a wire is B = U₀I/2R

Therefore there are 2 half circles. The outer circle makes the B field into the page at the point P and the inner circle is making the field out of the page. To easily see this, the best thing to use is an RHR. Thus, subtraction is applied. The two straight wire lengths are not contributing to this field because they seem to be running into/out of P. This means that r and I are parallel, thus the cross-product in Biot-Savart calculation will got to zero.

The answer be written down (this is after discovering that there are 2 half circles):

B= ½ [U₀I/2a-U₀I/2b) out= U₀I/4 [1/a – 1/b] out = B

Read more about the magnetic field from https://brainly.com/question/29780731?

#SPJ4

This means that the installation of signals would save 1800 vehicles/hour * 20 seconds/vehicle = 36000 seconds of control delay per hour during the morning and evening peaks.

As A four-leg urban stop-controlled intersection is experiencing high control delays during peak hours. The traffic analysis showed that installing signals would reduce control delay by 20 seconds per vehicle during the morning peak (6-9 am) and evening peak (4-7 pm) hours.  This can be translated to a reduction of control delay by 600 minutes per hour, or 10 hours per day during the peak hours. The installation of signals can greatly improve the traffic flow and reduce congestion and wait times for drivers at this intersection.

Learn more about delay here:

https://brainly.com/question/29490806

#SPJ4

The work done by the person is -1905.15 J.

Work is defined in a way that takes into account both the forces applied to the body and the total displacement of the body. A constant force F comes before this block. This force's objective is to move the body a specified amount (d) of distance in a straight line in the force's direction.

F = [tex]\mu_{k}[/tex]N

N = mgcos(25°)

So, the work done by force of friction is given as

W= f· BC cos (180°)

= - [tex]\mu_{k}[/tex] mg cos(25°) ×BC

= -0.65 ×(100+10)9.8 ×cos(25°) ×3

= -1905.15 J

To know more about work done, visit:

https://brainly.com/question/13662169

#SPJ1

The time elapses between a moment of maximum speed and the next moment of maximum acceleration.   0.4750 s

Speed is the fee at which an item's position adjustments, measured in meters in keeping with 2d. as an example, if an object starts at the origin, after which movements 3 meters in 3 seconds, its velocity is one meter in step with second. The equation for pace is simple: distance divided by using time.

Calculation:-

X (+) = ASm (wt)

V (+) = Aw cos (wt)

a (+) = - Aw²sin (wt)

Aw/Aw² = (max) (v)/max (v)

= 2.23 ms/7.37 ms²

= 0.302578

w = 1/ 0.302578

= 3.3049 rad/sec

t = 2π/4w

= 0.475 sec.

Acceleration, price at which velocity adjustments with time, in phrases of both speed and course. A factor or an item transferring in a directly line is increased if it hurries up or slows down. movement on a circle is expanded even supposing the rate is steady, due to the fact the route is constantly changing.

Learn more about acceleration here :-

brainly.com/question/460763

#SPJ4