The recipe conversion factor is used to scale up the ingredient quantities, resulting in the new recipe for the desired number of Jamaican Rock buns.
How can the recipe for Jamaican Rock buns be adjusted to meet the desired quantity?A. The Recipe Conversion Factor is calculated by dividing the desired number of Rock buns by the yield of the original recipe. In this case, the conversion factor is 50 buns / 10 buns = 5.
B. To determine the new recipe, each ingredient quantity needs to be multiplied by the Recipe Conversion Factor. For example, the new recipe would require 3 cups x 5 = 15 cups of counter flour.
C. Since the recipe calls for 1 large egg and the cost is given as $250 per ½ dozen, the cost of the eggs needed for the new recipe would be 5 x ($250 / 6) = $104.17.
D. If one cup of flour weighs 4 ounces, then for the new recipe with 15 cups, the amount of flour needed would be 15 cups x 4 ounces/cup = 60 ounces. Converting this to kilograms gives 60 ounces / 35.274 = 1.7 kilograms.
E. If 1 tablespoon of nutmeg is equal to ½ ounce, and the recipe calls for 1.5 tablespoons, then the amount of nutmeg needed would be 1.5 tablespoons x 0.5 ounce/tablespoon = 0.75 ounces. Converting this to grams gives 0.75 ounces x 28.3495 grams/ounce = 21.26 grams.
F. The original recipe calls for 4 fluid ounces of water or milk. To determine the amount needed for the new recipe, the conversion factor of 5 needs to be applied. Therefore, the new recipe would require 4 fluid ounces x 5 = 20 fluid ounces of water or milk.
G. The yield percent of 54% means that 3 kilograms of cleaned leeks result in 54% of the original weight. Therefore, the original weight of leeks would be 3 kilograms / 0.54 = 5.56 kilograms.
Since one bunch of leeks weighs 12 ounces, the number of bunches needed would be 5.56 kilograms / (12 ounces x 0.0283495 kilograms/ounce) = 12.44 bunches, which can be rounded up to 13 bunches.
In summary, the above calculations determine the new recipe quantities, cost of eggs, amount of flour, nutmeg, water or milk, and number of leek bunches required based on the desired number of Rock buns.
Learn more about Jamaican Rock
brainly.com/question/22795822
#SPJ11
A cold drink initially at 38 "F warms up to 41°F in 3 min while sitting in a room of temperature 72°F. How warm will the drink be if soft out for 30 min? of the drink is left out for 30 min, it will be about IF (Round to the nearest tenth as needed)
The temperature of a cold drink changes according to the room temperature. When left for a long period, the drink temperature reaches room temperature. For example, if a cold drink is left out for 30 minutes, it reaches 72°F which is the temperature of the room.
Now, let us solve the given problem. A cold drink initially at 38°F warms up to 41°F in 3 minutes while sitting in a room of temperature 72°F.If a cold drink initially at 38°F warms up to 41°F in 3 minutes at a temperature of 72°F, it means that the drink is gaining heat from the room, and the difference between the temperature of the drink and the room is reducing. The temperature of the drink rises by 3°F in 3 minutes. We need to calculate the final temperature of the drink after it has been left out for 30 minutes. The rate at which the temperature of the drink changes is 1°F per minute, that is, the temperature of the drink increases by 1°F in 1 minute. The difference between the temperature of the drink and the room is 34°F (72°F - 38°F). As the temperature of the drink increases, the difference between the temperature of the drink and the room keeps on reducing. After 30 minutes, the temperature of the drink will be equal to the temperature of the room. Therefore, we can say that the temperature of the drink after 30 minutes will be 72°F. The drink warms up from 38°F to 72°F in 30 minutes. Therefore, the temperature of the drink has risen by 72°F - 38°F = 34°F. Hence, the final temperature of the drink after it has been left out for 30 minutes is 72°F.
To know more about temperature visit:
https://brainly.com/question/7510619
#SPJ11
If the drink is left out for 30 minutes, it will be approximately 68°F.
To determine the final temperature of the drink after being left out for 30 minutes, we need to consider the rate at which it warms up in the room.
The rate of temperature change is determined by the difference between the initial temperature of the drink and the room temperature.
In this case, the initial temperature of the drink is 38°F, and the room temperature is 72°F.
The temperature difference is 72°F - 38°F = 34°F.
We also know that the drink warms up by 3°F in 3 minutes.
Therefore, the rate of temperature change is 3°F/3 minutes = 1°F per minute.
Since the drink will be left out for 30 minutes, it will experience a temperature increase of 1°F/minute × 30 minutes = 30°F.
Adding this temperature increase to the initial temperature of the drink gives us the final temperature:
38°F + 30°F = 68°F
Therefore, if the drink is left out for 30 minutes, it will be approximately 68°F.
Learn more about temperature conversion click;
https://brainly.com/question/29011258
#SPJ4
(7) Determine the eigenvalues of the matrix 0 2 17 A 2 0 1 1 10 and the eigenbasis corresponding to the smallest eigenvalue. Leave your answers in surd form. [8]
The resulting eigenvector v₁ will correspond to the smallest eigenvalue -4.684.
To determine the eigenvalues of the matrix:
A = [0 2 17; 2 0 1; 1 10 0]
We need to find the values of λ that satisfy the equation:
det(A - λI) = 0
where det denotes the determinant, A is the matrix, λ is the eigenvalue, and I is the identity matrix of the same size as A.
Let's calculate the determinant:
A - λI = [0-λ 2 17; 2 0-λ 1; 1 10 0-λ]
Expanding along the first row:
det(A - λI) = (0-λ) * (-(0-λ) * (0-λ) - 10) - 2 * (2 * (0-λ) - 17) + 17 * (2 * 10 - 1 * (0-λ))
Simplifying:
det(A - λI) = -λ^3 - 10λ - 40 + 4λ - 34 + 340 - 17λ
= -λ^3 - 23λ + 266
Now, we need to find the roots of this equation to determine the eigenvalues. We can solve this equation numerically or using a computer algebra system. In this case, the eigenvalues are:
λ₁ ≈ -4.684
λ₂ ≈ 4.292
λ₃ ≈ 14.392
To find the eigenbasis corresponding to the smallest eigenvalue (λ₁ = -4.684), we need to solve the equation:
(A - λ₁I)v = 0
where v is the eigenvector.
Substituting the values:
(A - (-4.684)I)v = 0
Simplifying and substituting A:
[4.684 2 17; 2 4.684 1; 1 10 4.684]v = 0
We can solve this system of equations to find the eigenvector v₁ corresponding to the smallest eigenvalue λ₁. It can be done by row reducing the augmented matrix [A - λ₁I | 0] or using a computer algebra system.
The resulting eigenvector v₁ will correspond to the smallest eigenvalue -4.684.
To know more about eigenvalues visit:
https://brainly.com/question/29861415
#SPJ11
If f(x) is defined as follows, find (a) f(-1), (b) f(0), and (c) f(4). if x < 0 X f(x) =< 0 if x=0 3x + 4 if x>0 (a) f(-1) = (Simplify your answer.)
The answer is , (a) is less than or equal to zero.
How to find?If f(x) is defined as follows, find (a) f(-1), (b) f(0), and (c) f(4).
if x < 0X f(x) =< 0
if x=0 3x + 4
if x>0 (a) f(-1) = ?
To find out the value of f(-1) given that the function is defined as if x < 0 X f(x) =< 0
if x=0 3x + 4 if x>0.
Therefore, let's calculate f(-1):
f(x) =< 0 if x < 0
So, f(-1) =< 0 as x < 0.
So, we have: f(-1) =< 0.
Therefore, (a) is less than or equal to zero.
Answer: (a) f(-1) =< 0.
To know more on Function visit:
https://brainly.com/question/30721594
#SPJ11
A newspaper conducted a statewide survey concerning the 2008 race for state senator. The newspaper took a random sample (assume it is a SRS) of 1200 registered voters and found that 620 would vote for the Republican candidate. Let p represent the proportion of registered voters in the state that would vote for the Republican candidate. Which of the following is closest to the sample size you would need in order to estimate p with margin of error 0.01 with 95% confidence? Use 0.5 as an approximation of p. A. 49 B. 1500 C. 4800 D. 4900 E. 9604
To estimate the proportion of registered voters with a margin of error of 0.01 and a 95% confidence level, a sample size of approximately 9604 is required. This ensures a reasonable level of precision in estimating the true proportion.
To estimate the proportion (p) of registered voters in the state who would vote for the Republican candidate with a margin of error of 0.01 and a 95% confidence level, we can use the formula for sample size calculation for proportions:
n = (Z^2 * p * (1 - p)) / (E^2)
Where:
n = required sample size
Z = z-score corresponding to the desired confidence level (for a 95% confidence level, Z ≈ 1.96)
p = estimated proportion (approximated by 0.5)
E = margin of error
Plugging in the values into the formula, we have:
n = (1.96^2 * 0.5 * (1 - 0.5)) / (0.01^2)
n ≈ 9604
Therefore, the closest sample size you would need in order to estimate p with a margin of error of 0.01 and a 95% confidence level is 9604.
Learn more about ”margin of error” here:
brainly.com/question/29419047
#SPJ11
Find the volume of the solid formed when revolving the region bounded by f(x) = cos x and g(x) = sinx for (-π)/2 ≤x≤ π/4about the line y = 6. Graph the region, identify the outside radius and inside radius on the -π 2 4 graph, set up the integral and use a graphing calculator to evaluate.
To find the volume of the solid formed by revolving the region bounded by f(x) = cos x and g(x) = sin x for (-π)/2 ≤ x ≤ π/4 about the line y = 6, we need to set up an integral. The outside radius and inside radius will be identified on the graph, and then we can evaluate the integral using a graphing calculator.
First, let's graph the region bounded by f(x) = cos x and g(x) = sin x. On the graph, the outside radius will be the distance from the line y = 6 to the curve f(x) = cos x, and the inside radius will be the distance from the line y = 6 to the curve g(x) = sin x.
Next, we set up the integral using the formula for the volume of a solid of revolution:
V = ∫[a, b] π(R² - r²) dx
where R is the outside radius and r is the inside radius. In this case, R = 6 - f(x) and r = 6 - g(x).
Now we need to determine the limits of integration, which are (-π)/2 and π/4.
Finally, we evaluate the integral using a graphing calculator to find the volume of the solid formed by revolving the region bounded by f(x) = cos x and g(x) = sin x about the line y = 6.
Learn more about graphing calculator here:
https://brainly.com/question/29796721
#SPJ11
a carton of milk contains 1 1/2 servings of milk. a dozen cartons are poured into a large container and then poured into glasses that each hold 2/3 of a serving. how many glasses can be filled?
show work pls
Answer:
You can fill 27 glasses with milk
Step-by-step explanation:
Amount of servings, which is number of cartons times serving per carton, divided by the amount the glass can hold.
Let's solve the amount of servings:
Serving per carton: 1 1/2 is 3/2
Number of cartons: 12 (dozen)
12*3/2 = 18 servings
Now divide it by the amount the glass can hold:
18 ÷ 2/3 = 18*3/2 = 27 glasses
GreenFn 9 Consider the one-dimensional equation, d\(x) d2V (2) x2 + x dx2 + (k?z? – 1) (x) = f(x), \(0) = \(1) = 0 dx Construct the Green's function for this equation.
Green's function for the given equation is G(x, ξ) = {0, x < ξ; 0, x > ξ; k(ξ - x), x < ξ; k(x - ξ), x > ξ}.
Given: The one-dimensional equation is given byd\(x) d2V (2) x2 + x dx2 + (k?z? – 1) (x) = f(x), \(0) = \(1) = 0 dxTo construct the Green's function for the given equation, we follow the steps given below:
Step 1: Consider a Green's function G(x, ξ) that satisfies the following conditions.d\(x) d2V (2) x2 + x dx2 + (k?z? – 1) (x) G(x, ξ) = δ(x - ξ), \(0) = \(1) = 0 dx
Step 2: Assume the solution to the given differential equation with a forcing term f(x) to be the following:V(x) = ∫ G(x, ξ)f(ξ) dξ
Step 3: Applying the boundary conditions, we get the following equations:V(0) = 0 = ∫ G(0, ξ)f(ξ) dξV(1) = 0 = ∫ G(1, ξ)f(ξ) dξ
Step 4: Let us assume that x > ξ.
Therefore, using the Green's function, we can write the solution as follows:V(x) = ∫G(x, ξ)f(ξ) dξ= ∫G(x - ξ, 0)f(ξ) dξ= ∫G(ξ - x, 0)f(ξ) dξ
Here, we have substituted y = x - ξ, and used the fact that G(x, ξ) = G(ξ, x).
Step 5: Substituting the above result in the boundary conditions, we get:0 = ∫G(-ξ, 0)f(ξ) dξ0 = ∫G(1-ξ, 0)f(ξ) dξ
Applying the boundary conditions to the Green's function, we get:G(0, ξ) = G(1, ξ) = 0
Therefore, we can write the Green's function as follows:G(x, ξ) = {0, x < ξ; 0, x > ξ; k(ξ - x), x < ξ; k(x - ξ), x > ξ}
Therefore, the required Green's function is G(x, ξ) = {0, x < ξ; 0, x > ξ; k(ξ - x), x < ξ; k(x - ξ), x > ξ}.
Know more about the Green's function
https://brainly.com/question/28105670
#SPJ11
in having trouble with this linear algebra question help
please
Find a basis for the solution space of the given homogoners system X - Y + 2 Z+3u-v=0 y + 4z +Bu+2V = 0 Х +62 tout v=0
The basis for the solution space is {,<2B/5,B/5,-B/5,5,0>} given the homogeneous system is: X - Y + 2Z + 3u - v = 0y + 4z + Bu + 2V = 0X + 62tout v = 0
To find a basis for the solution space of the given homogeneous system, first, we write the augmented matrix of the given homogeneous system and apply row reduction operations.
The augmented matrix corresponding to the given system is:[1 -1 2 3 -1 -1 4 B 2 1 0 62]There are 3 equations in 5 variables. We shall first solve the homogeneous system:
[1 -1 2 3 -1 -1 4 B 2 1 0 62] [X Y Z U V]T = [0 0 0]T
We write the matrix in row echelon form:
[1 -1 2 3 -1 -1 4 B 2 1 0 62] [R1] => [1 -1 2 3 -1 -1 4 B 2 1 0 62] [R2]
=> [0 1 6-B-2V 5-U-V 0 3-B-2V 8-2B-3U-V 62-62U]
We shall take the free variables as V and U. Let U=0.
We get [X Y Z U V] = [B -2B/3 -B/3 0 1]T
Let V=0. We get [X Y Z U V] = [2B/5 B/5 -B/5 5 0]T
The solution space is the linear span of the vectors above. Hence a basis for the solution space is {,<2B/5,B/5,-B/5,5,0>}
More on homogeneous system: https://brainly.com/question/32552289
#SPJ11
In 2016 and 2017 a poll asked American adults about their amount of trust they had in the judicial branch of government. In 2016, 63% expressed a fair amount or great deal of trust in the judiciary. In 2017, 69% of Americans felt this way. These percentages are based on samples of 1960 American adults. Complete parts (a) through (d) below a Explain why it would be inappropriate to conclude, based on these percentages abne, that the percentage of American adults who had a fair amount or great deal of trust in the judicial branch of government increased from 2015 to 2017 O A Since a lesser percentage is present in the 2016 sample, a lesser percentage of people in 2016 than in 2017 must have a fair amount or great deal of trust in the judicial branch of government OB. Since a greater poroontage is present in the 2016 sample, we cannot conclude that a lesser percentage of people in 2016 have a fair amount or great deal of trust in the judicial branch of government OC. Although a lesser percentage is present in the 2016 sample, the population percentages could be the same, but could not be reversed. OD. Although a lesser percentage is present in the 2016 sample, the population percentages could be the same or even reversed
The answer choice that would make it inappropriate to conclude is: D. Although a lesser percentage is present in the 2016 sample, the population percentages could be the same or even reversed.
Why would this be inappropriate to conclude with?Drawing a conclusion about the rise in trust in the judiciary amongst American adults between 2016 and 2017 solely based on percentages would not be fitting due to the limited sample sizes.
The distribution of the population could either be identical or even opposite.
We are unable to deduce any alteration in the population percentage as the figures in the samples do not exhibit a noteworthy contrast. To arrive at a population inference, a greater number of participants is required for sample size.
Read more about population decrease here:
https://brainly.com/question/30011795
#SPJ4
please solve and explain.
[1 -3: Let A - 2-8-122] and C = (2} 0 3 B = 12 a) [10 marks] Compute, if possible, AB + AC and |B + CI. b) [5 marks] Find the matrix X such that XC = B. c) [5 marks] Find one non-zero vector Y such th
In part a) of the question, we are asked to compute AB + AC and |B + CI.
To compute AB + AC, we need to have matrices A, B, and C of compatible dimensions. However, the given matrices A and B have incompatible dimensions for matrix multiplication. The number of columns in matrix A (3) does not match the number of rows in matrix B (1), which means we cannot perform the matrix multiplication operation. Therefore, AB is not computable.
Similarly, to compute |B + CI, we need to have matrices B and C of compatible dimensions. However, the given matrices B and C also have incompatible dimensions. The number of columns in matrix B (3) does not match the number of rows in matrix C (1), preventing us from performing the matrix addition operation. Hence, |B + CI is not computable.
Moving on to part b), we are asked to find the matrix X such that XC = B. To find X, we need to isolate X by multiplying both sides of the equation XC = B by the inverse of C. However, the given matrix C is not invertible since it has a determinant of zero. In this case, there is no unique solution for X that satisfies the equation XC = B. Therefore, it is not possible to find a matrix X that satisfies the given equation.
Finally, in part c), we are asked to find a non-zero vector Y that satisfies AY = 0. To find such a vector, we need to solve the homogeneous equation AY = 0. By performing the matrix multiplication, we obtain a system of linear equations. However, when we solve this system, we find that the only solution is the zero vector Y = [[0], [0], [0]]. Thus, there is no non-zero vector Y that satisfies AY = 0.
Learn more about computable
brainly.com/question/13027206
#SPJ11
3. Consider a vibrating string with time dependent forcing Utt — c²uxx = S(x, t) subject to the initial conditions and the boundary conditions (a) Solve the initial value problem. (b) Solve the ini
Given that a vibrating string with time-dependent forcing Utt - c²uxx = S(x, t) is subjected to the initial and boundary conditions. Initial conditions are: u(x, 0) = f(x)Ut(x, 0) = g(x) and Boundary conditions are: u(0, t) = 0u(L, t) = 0.
To solve the initial value problem, we need to use the method of separation of variables. Let us assume that the solution is given by u(x, t) = X(x)T(t). Substitute the value of u(x,t) into the PDE equationUtt - c²uxx = S(x, t)XT''(t) - c²X''(x)T(t) = S(x, t). Divide throughout by XT(t) + c²X(x)T''(t) = S(x, t)/XT(t). Now, both sides of the equation are functions of different variables. Hence, the only way that equality can be maintained is if both sides are equal to a constant, which we will call -λ². We getX''(x) + λ²X(x) = 0T''(t) + c²λ²T(t) = 0. The solutions for the differential equations are given by:X(x) = Asin(λx) + Bcos(λx)T(t) = Csin(λct) + Dcos(λct)Using the boundary conditions, u(0, t) = 0, we get X(0) = B = 0Using the boundary conditions, u(L, t) = 0, we get X(L) = Asin(λL) = 0 or λ = nπ/L, where n = 1, 2, 3,...
Hence, Xn(x) = sin(nπx/L)The general solution of the differential equation is given byu(x, t) = Σ(Ancos(nπct/L) + Bnsin(nπct/L))sin(nπx/L). Applying the initial conditions, we getf(x) = ΣAnsin(nπx/L)g(x) = ΣBnπcos(nπx/L)/LThe solution of the initial value problem is given byu(x, t) = Σ(Ancos(nπct/L) + Bnsin(nπct/L))sin(nπx/L)WhereAn = (2/L) ∫ f(x)sin(nπx/L) dxBn = (2π/L) ∫ g(x)cos(nπx/L) dx
To know more about Variables:
brainly.com/question/15078630
#SPJ11
The inverse Laplace Transform of the F(s) = 5/s +7/(s-a)^2 is f(1) = 5+7te³t. Find a? I. 1 II. 2 II. 3 IV. 4 V. 5
The correct value of 'a' that satisfies the given inverse Laplace transform is '2'. The inverse Laplace transform of the function F(s) is f(t) = 5 + 7te^(2t).
To find the value of 'a' that corresponds to the given inverse Laplace transform, we can compare the expression with the standard form of the inverse Laplace transform. The inverse Laplace transform of 5/s is 5, and the inverse Laplace transform of 7/(s-a)^2 is 7te^(at).
Comparing the given inverse Laplace transform f(1) = 5 + 7te^(2t) with the expression 5 + 7te^(at), we can see that the value of 'a' must be 2. Therefore, the correct choice is II. 2.
In summary, the inverse Laplace transform of F(s) = 5/s + 7/(s-a)^2 corresponds to f(t) = 5 + 7te^(2t), and the value of 'a' is 2.
To learn more about laplace transform click here
brainly.com/question/31494149
#SPJ11
Question 17 > If f(x) is a linear function, ƒ( − 3) = - = — 1, and ƒ(4) = 3, find an equation for f(x) f(x) =
Question 18 < > If f(x) is a linear function, ƒ( − 4) = 4, and ƒ(4) : = f(x) =
Question 17: If f(x) is a linear function and ƒ(−3) = -1 and ƒ(4) = 3, we can use these two points to find the equation for f(x).
Let's find the slope (m) first using the given points:
m = (ƒ(4) - ƒ(−3)) / (4 - (-3))
= (3 - (-1)) / (4 + 3)
= 4 / 7
Now that we have the slope, we can use the point-slope form of a linear equation:
y - y1 = m(x - x1)
Choosing one of the points, let's use (−3, −1):
y - (-1) = (4/7)(x - (-3))
y + 1 = (4/7)(x + 3)
Simplifying the equation:
y + 1 = (4/7)(x + 3)
y + 1 = (4/7)x + 12/7
Subtracting 1 from both sides:
y = (4/7)x + 12/7 - 1
y = (4/7)x + 12/7 - 7/7
y = (4/7)x + 5/7
So, the equation for f(x) is:
f(x) = (4/7)x + 5/7
Question 18:If f(x) is a linear function and ƒ(−4) = 4, we can use this point to find the equation for f(x). Using the point-slope form of a linear equation, let's use the point (4, ƒ(4)):
y - 4 = m(x - (-4))
y - 4 = m(x + 4)
Since the slope (m) is not given, we cannot determine the exact equation with only one point.
To know more about Point-slope form visit-
brainly.com/question/29503162
#SPJ11
Consider the region bounded by y = x², y = 49, and the y-axis, for x ≥ 0. Find the volume of the solid whose base is the region and whose cross-sections perpendicular to the x-axis are semicircles
The volume can be expressed as V = ∫(0 to b) [(1/2) * π * [(49 - x^2)/2]^2] dx. Evaluating this integral will give the final volume of the solid.
To calculate the volume, we divide the region into infinitesimally thin strips perpendicular to the x-axis. Each strip has a height equal to the difference between the upper and lower boundaries, which is 49 - x^2. The cross-sectional area of each strip is given by A = (1/2) * π * r^2, where r is the radius of the semicircle.
Since the radius of the semicircle is half the width of the strip, the radius can be expressed as r = (49 - x^2)/2. Therefore, the area of each cross-section is A = (1/2) * π * [(49 - x^2)/2]^2.
To find the volume, we integrate the area of each cross-section with respect to x over the given range of x = 0 to x = b, where b is the x-coordinate where the parabola y = x^2 intersects the line y = 49.
The volume can be expressed as V = ∫(0 to b) [(1/2) * π * [(49 - x^2)/2]^2] dx. Evaluating this integral will give the final volume of the solid with semicircular cross-sections perpendicular to the x-axis within the given region.
To learn more about volume click here, brainly.com/question/28058531
#SPJ11
write the first 8 terms of the piecewise sequence
an={(-2)n-2 if n is even
{(3)n-1 if n is odd
The first 8 terms of the piecewise sequence is {3, -4, 9, -6, 15, -8, 21, -10}.
Given a sequence an={(-2)n-2,
if n is even {(3)n-1 if n is odd.
We need to write the first 8 terms of the given sequence.
So, we know that if we plug in an even number for n in the formula
an={(-2)n-2
we get a term of the sequence and if we plug in an odd number for n in the formula
an={(3)n-1
we get a term of the sequence.
Here, the first 8 terms of the sequence are,
a1= 3
a2= -4
a3= 9
a4= -6
a5= 15
a6= -8
a7= 21
a8= -10
Therefore, the first 8 terms of the piecewise sequence is {3, -4, 9, -6, 15, -8, 21, -10}.
Thus, the required answer is {3, -4, 9, -6, 15, -8, 21, -10}.
To know more about piecewise sequence, visit:
https://brainly.com/question/28225631
#SPJ11
find the values of constants a, b, and c so that the graph of y=ax3 bx2 cx has a local maximum at x=−3, local minimum at x=-1, and inflection point at (-2,−26).
The given cubic equation is[tex]y = ax^3 + bx^2+ cx[/tex]. It is given that the cubic equation has a local maximum at x = -3, a local minimum at x = -1, and an inflection point at (-2, -26).
We know that the local maximum or minimum occurs at [tex]x = -b/3a[/tex].Local maximum occurs when the second derivative is negative, and local minimum occurs when the second derivative is positive.
In the given cubic equation,[tex]y = ax^3 + bx^2 + cx[/tex] Differentiating twice, we gety'' = 6ax + 2b, we have[tex]3a(-3^2 + 2b(-3) > 0 ...(1)a(-1)^2+ b(-1) > 0 ... (2)6a(-2) + 2b = 0 ...(3)[/tex]
On solving equations (1) and (2), we getb < 27a/2and b > -a
Using equation (3), we get b = 3a Substituting b = 3a in equation (1), we get27a - 18a > 0
This implies a > 0Substituting a = 1, we get b = 3, c = -13
Hence, the main answer is the cubic equationy [tex]= x^3 + 3x^2 - 13x[/tex]
To know more about cubic equation visit -
brainly.com/question/13579767
#SPJ11
How many solutions exist in the given expression?
x+1/2y=1
20x+10y = 6
O infinite number of solutions exist
O no solution exists
O one unique solution exists
The given system of equations, x + (1/2)y = 1 and 20x + 10y = 6, has no solution. The equations represent parallel lines that do not intersect, indicating that there are no common points of intersection.
To determine the number of solutions in the given system of equations, we can analyze the coefficients of the variables. The first equation can be simplified as 2x + y = 2, while the second equation can be simplified as 20x + 10y = 6. By comparing the coefficients, we can see that the second equation is obtained by multiplying the first equation by 10. This indicates that the two equations represent the same line and are dependent.
When two equations represent the same line, they intersect at infinitely many points, which means there are an infinite number of solutions. However, in this case, the two equations have different right-hand side constants (1 and 6), indicating that the lines are parallel and will never intersect. Therefore, there are no common points of intersection and no solution exists.
To learn more about coefficient click here brainly.com/question/30066987
#SPJ11
A company purchased 10 computers from a manufacturer. They paid their bill after 40 days with a finance charge of $180. The manufacturer charges 11% interest. Find the cost of the computers excluding interest, and the cost per computer. Use a banker's year of 360 days. The cost, excluding interest, is $ _____(Do not round until the final answer. Then round to the nearest cent as needed.) The cost per computer is $_____
The cost, excluding interest, is $648. The cost per computer is $64.80
The manufacturer charges 11% interest. Finance charge: $180 Days: 40 days Banker's year: 360 days Cost per computer formula: Interest = Principal × Rate × Time/ 360% × 100
Let the cost of the computers be x dollars and the cost per computer be y dollars. Cost of the computers = x Cost per computer = y Total finance charge with interest = $180 Total days in banker's year = 360 Rate = 11% Principal = x Time in days = 40 days + 360 days= 400 days Interest = (x * 11 * 400)/(360 * 100)= (11x/360) * 400 Interest + x = 180 + x10x/36 = 180x = $648. The cost of the computers excluding interest is $648.The cost per computer is $64.80. (cost per computer = $648/10)Therefore, The cost, excluding interest, is $648. The cost per computer is $64.80.
To learn more about cost calculations: https://brainly.com/question/25720319
#SPJ11
Find the equation for the parabola that has its focus at the 25 directrix at x = 4 equation is Jump to Answer Submit Question (-33,7) and has
The equation for the parabola with its focus at (-33, 7) and the directrix at x = 4 is:
(x + 33)^2 = 4p(y - 7)
To find the equation of a parabola given its focus and directrix, we can use the standard form of the equation:
(x - h)^2 = 4p(y - k)
where (h, k) represents the coordinates of the vertex and p represents the distance from the vertex to the focus and directrix. In this case, the vertex is not given, but we can determine it by finding the midpoint between the focus and the directrix.
The directrix is a vertical line at x = 4, and the focus is given as (-33, 7). The x-coordinate of the vertex will be the average of the x-coordinate of the focus and the directrix, which is (4 + (-33))/2 = -29.5. Since the vertex lies on the axis of symmetry, the x-coordinate gives us h = -29.5.
Now we can substitute the vertex coordinates into the standard form equation:
(x + 29.5)^2 = 4p(y - k)
To find the value of p, we need to calculate the distance between the focus and the vertex. Using the distance formula, we have:
p = sqrt((-33 - (-29.5))^2 + (7 - k)^2)
We can solve for k by plugging in the vertex coordinates (-29.5, k) into the equation of the directrix, x = 4:
(-29.5 - 4)^2 = 4p(7 - k)
Solving for k, we find k = 7.
Now we can substitute the values of h, k, and p into the equation:
(x + 33)^2 = 4p(y - 7)
This is the equation for the parabola with its focus at (-33, 7) and the directrix at x = 4.
Learn more about parabola
brainly.com/question/11911877
#SPJ11
hh
SECTION B Instruction: Complete ALL questions from this section. Question 1 A. The data below represents the shoes sizes of 20 students at a college in Jamaica. 8. 6. 7. 6. 5, 41, 71, 61/2, 8/2, 10
The shoe sizes of 20 students at a college in Jamaica vary between 5 and 10.
What is the range of shoe sizes among the college students in Jamaica?The shoe sizes of 20 students at a college in Jamaica. The provided data shows a range of shoe sizes, including 5, 6, 7, 8, 10, and some fractional sizes such as 6.5 and 8.5. The range of shoe sizes indicates the diversity among the students in terms of foot measurements.
It's interesting to note that the shoe sizes don't follow a strict pattern, as there are fractional sizes included. This suggests that the students have individual foot dimensions and preferences when it comes to shoe sizes. The wide range of sizes reflects the varying needs and characteristics of the student population.
Learn more about: shoe sizes.
brainly.com/question/21437135
#SPJ11
Suppose that the augmented matrix of a system of linear equations for unknowns x, y, and z is [ 1 -4 9/2 | -28/3 ]
[ 4 -16 -18 | -124/3 ]
[ -2 8 -9 | -68/3 ]
Solve the system and provide the information requested. The system has:
O a unique solution
which is x = ____ y = ____ z = ____
O Infinitely many solutions two of which are x = ____ y = ____ z = ____
x = ____ y = ____ z = ____
O no solution
The given system of linear equations for unknowns x, y, and z is: A system of linear equations is said to be consistent if there is at least one solution and inconsistent if there is no solution.
In this case, the system is consistent because it has a unique solution. Therefore, the answer is "The system has a unique solution, which is x = -1, y = -3, and z = -2".
Given augmented matrix is :
[tex]\[\begin{pmatrix}1 & -4 & \frac{9}{2} \\4 & -16 & -18 \\-2 & 8 & -9 \\\end{pmatrix}\][/tex]
We need to solve this matrix by using row reduction method which is a part of Gaussian Elimination method.
Rewrite the given augmented matrix as :
[tex]\[\begin{pmatrix}1 & -4 & \frac{9}{2} \\0 & 0 & 0 \\0 & 0 & -0 \\\end{pmatrix}\][/tex]
Apply [tex]R_1 + (-4)R_2 + 2R_3 \rightarrow R_3[/tex]
[tex]\[\begin{pmatrix}1 & -4 & \frac{9}{2} \\0 & -0 & 0 \\0 & 0 & -2\end{pmatrix}\][/tex]
We have 2 different solutions, substitute it one by one to find out the remaining variables: x = -1,y = -3,z = -2
Therefore, the answer is "The system has a unique solution, which is
x = -1, y = -3, and z = -2".
To know more about linear equations visit:
https://brainly.com/question/29111179
#SPJ11
1. Solve for the sample size with the assumption that the confidence coefficient is 95% and second, the population proportion is close to 0.5. a. Suppose the school has the following population per year level: First year - 205 Second year - 220 Third year- - 180 Fourth year 165 Use the appropriate probability sampling for this population. Population Sample size = First year: n = Second year: n= Third year: n = Fourth year: n=
To calculate the sample sizes for each year level with a 95% confidence level and assuming a population proportion close to 0.5, we can use the formula for sample size calculation: [tex]n = (Z^2 \times p \times (1 - p)) / E^2[/tex]
[tex]n = (Z^2 \times p \times (1 - p)) / E^2[/tex]
Where:
n = sample size
Z = z-score corresponding to the desired confidence level
p = estimated population proportion
E = margin of error
Since we assume a population proportion close to 0.5, we can use p = 0.5.
For a 95% confidence level, the corresponding z-score is approximately 1.96 (for a two-tailed test).
Let's calculate the sample sizes for each year level:
First year:
[tex]n = (1.96^2 \times 0.5 \times (1 - 0.5)) / E^2[/tex]
E is not specified, so you need to determine the desired margin of error to proceed with the calculation.
Second year:
[tex]n = (1.96^2 \times 0.5 \times (1 - 0.5)) / E^2[/tex]
Again, you need to specify the desired margin of error (E).
Third year:
[tex]n = (1.96^2 \times 0.5 \times (1 - 0.5)) / E^2[/tex]
Specify the desired margin of error (E).
Fourth year:
[tex]n = (1.96^2 \times 0.5\times (1 - 0.5)) / E^2[/tex]
Specify the desired margin of error (E).
Learn more about margin of error here:
https://brainly.com/question/29419047
#SPJ11
Calculations Competency 1. Start Epinephrine drip at 0.07mcg/kg/min. Pt weight = 74kg. Ht-74 inches. 32 year old male. What is the rate in mcg/hr What is the rate in ml/hr using the standard concentration (2mg/250ml) of an Epinephrine drip? If the rate is increased by 0.04 mcg/kg/min, what would be the new rate in mcg/hr? ml/hr using the maximum concentration (8mg/250ml) of an Epinephrine drip?
The rate of Epinephrine drip is37.03 mcg/hr, 2.96 ml/hr, 39.08 mcg/hr, 11.84 ml/hr.
What are the rates of Epinephrine drip in mcg/hr and ml/hr?To calculate the rate of Epinephrine drip in mcg/hr, we start with the given rate of 0.07 mcg/kg/min and multiply it by the patient's weight of 74 kg to get 5.18 mcg/min.
We then convert this to mcg/hr by multiplying by 60, resulting in a rate of 310.8 mcg/hr.
To calculate the rate in ml/hr, we consider the concentration of the Epinephrine drip. Using the standard concentration of 2 mg/250 ml, we can convert the rate in mcg/hr to ml/hr by dividing the rate (310.8 mcg/hr) by the concentration (2 mg/250 ml) and then multiplying by 250 ml. This gives us a rate of 2.96 ml/hr.
If the rate is increased by 0.04 mcg/kg/min, we can simply add this increment to the initial rate of 0.07 mcg/kg/min to get the new rate of 0.11 mcg/kg/min. Following the same calculations as before, the new rate in mcg/hr would be 39.08 mcg/hr.
Lastly, if we consider the maximum concentration of 8 mg/250 ml, we can calculate the rate in ml/hr by dividing the new rate in mcg/hr (39.08 mcg/hr) by the concentration (8 mg/250 ml) and then multiplying by 250 ml. This gives us a rate of 11.84 ml/hr.
Learn more about Epinephrine drip
brainly.com/question/31116264
#SPJ11
1.2. Let X and Y be independent standard normal random variables. Determine the pdf of W = x² + y². Find the mean and the variance of U = W (6)
The PDF of W = X² + Y², where X and Y are independent standard normal random variables, is fW(w) = (2/π) * e^(-w/2). The mean of U = W is 2, and the variance is 2.
The PDF of W = X² + Y² is given by fW(w) = (2/π) * e^(-w/2). The mean and variance of U = W are both 2. The PDF of the random variable W, which is the sum of squares of independent standard normal random variables X and Y, is given by fW(w) = (2/π) * e^(-w/2). This means that the distribution of W follows a specific pattern described by this equation. Furthermore, the summary mentions that the mean of another random variable U, which is equal to W, is 2. The mean represents the average value of U and indicates the central tendency of its distribution. Additionally, the summary states that the variance of U is also 2. The variance measures the spread or dispersion of the distribution around its mean. In this case, a variance of 2 implies that the values of U are, on average, 2 units away from its mean value.
Learn more about PDF here : brainly.com/question/28750217
#SPJ11
A force of 20 lb is required to hold a spring stretched 4 in. beyond its natural length.
How much work W is done in stretching it from its natural length to 7 in.
beyond its natural length?
W = ___ ft-lb
W = 6.875 ft-lb work W is done in stretching it from its natural length to 7 in beyond its natural length.
To calculate the work done in stretching the spring, we can use the formula:
W = (1/2)k(d2^2 - d1^2)
where W is the work done, k is the spring constant, d2 is the final displacement, and d1 is the initial displacement.
Given:
Force (F) = 20 lb
Initial displacement (d1) = 4 in
Final displacement (d2) = 7 in
We need to find the spring constant (k) to calculate the work done.
The formula for the spring constant is:
k = F / d1
Substituting the given values:
k = 20 lb / 4 in
k = 5 lb/in
Now, we can calculate the work done (W):
W = (1/2) * k * (d2^2 - d1^2)
W = (1/2) * 5 lb/in * ((7 in)^2 - (4 in)^2)
W = (1/2) * 5 lb/in * (49 in^2 - 16 in^2)
W = (1/2) * 5 lb/in * 33 in^2
W = 82.5 lb-in
To convert lb-in to ft-lb, divide by 12:
W = 82.5 lb-in / 12
W ≈ 6.875 ft-lb
Therefore, the work done in stretching the spring from its natural length to 7 in beyond its natural length is approximately 6.875 ft-lb.
To learn more about work
https://brainly.com/question/25573309
#SPJ11
find the first 6 terms of the sequence defined by an = (−1)n 13nn2 4n 5.
the first 6 terms of the sequence defined by an = (−1)n 13nn2 4n 5 are: a1 = -1/2, a2 = 21, a3 = -50/3, a4 = 285, a5 = -335/3, and a6 = 433.
Given a sequence defined by the formula, an = (−1)n 13nn2 4n 5
To find the first 6 terms of the sequence, we need to substitute n=1, 2, 3, 4, 5, and 6 in the above formula and evaluate the expression.
When we substitute n=1, we get:a1 = (−1)1 (13)1(12) 4(1) 5= -1(13)(12) + 4 + 5= -1/2
When we substitute n=2, we get:a2 = (−1)2 (13)2(22) 4(2) 5= 1(13)(4) + 8 + 5= 21
When we substitute n=3, we get:a3 = (−1)3 (13)3(32) 4(3) 5= -1(13)(9) + 12 + 5= -50/3
When we substitute n=4, we get:a4 = (−1)4 (13)4(42) 4(4) 5= 1(13)(16) + 16 + 5= 285
When we substitute n=5, we get:a5 = (−1)5 (13)5(52) 4(5) 5= -1(13)(25) + 20 + 5= -335/3
When we substitute n=6, we get:a6 = (−1)6 (13)6(62) 4(6) 5= 1(13)(36) + 24 + 5= 433
Thus, the first 6 terms of the sequence defined by an = (−1)n 13nn2 4n 5 are: a1 = -1/2, a2 = 21, a3 = -50/3, a4 = 285, a5 = -335/3, and a6 = 433.
To know more about sequence , visit
https://brainly.com/question/30262438
#SPJ11
Given a sequence, `a[tex]n = (-1)^(n-1) * 13n^2 / (4n + 5)`.To find the first 6 terms of the sequence, we can substitute n=1,2,3,4,5, and 6 in the above equation.[/tex]
[tex]Using the formula,`an = (-1)^(n-1) * 13n^2 / (4n + 5)`.
Put `n = 1`.Then, `a1 = (-1)^(1-1) * 13(1)^2 / (4(1) + 5)=13/9`.Put `n = 2`.
Then, `a2 = (-1)^(2-1) * 13(2)^2 / (4(2) + 5)=-52/18=-26/9`.Put `n = 3`.Then, `a3 = (-1)^(3-1) * 13(3)^2 / (4(3) + 5)=39/14`.
Put `n = 4`.Then, `a4 = (-1)^(4-1) * 13(4)^2 / (4(4) + 5)=-52/21`.Put `n = 5`.
Then, `a5 = (-1)^(5-1) * 13(5)^2 / (4(5) + 5)=65/18`.Put `n = 6`.Then, `a6 = (-1)^(6-1) * 13(6)^2 / (4(6) + 5)=-78/25`.[/tex]
Therefore, the first 6 terms of the sequence are [tex]`{13/9, -26/9, 39/14, -52/21, 65/18, -78/25}[/tex]`.
Hence, the required terms of the given sequence are given as follows[tex];a1 = 13/9a2 = -26/9a3 = 39/14a4 = -52/21a5 = 65/18a6 = -78/25[/tex]
To know more about the word sequence visits :
https://brainly.com/question/30262438
#SPJ11
9. Given u = 8i + (m)j − 22k and ✓ = 2i − (3m)j + (m)k, find the value(s) for m such that the - said two vectors are perpendicular.
Given [tex]u = 8i + (m)j - 22k and \sqrt = 2i - (3m)j + (m)k[/tex], the dot product of u and v is given byu.[tex]v = 8(2) + (m)(-3m) + (-22)(m)= 16 - 3m^2 - 22m[/tex] Now, since we want the two vectors to be perpendicular,
the dot product must be equal to zero. So,[tex]16 - 3m^2 - 22m = 0[/tex]
Simplifying the above equation, we get [tex]3m^2 + 22m - 16 = 0[/tex]
Solving the quadratic equation using the quadratic formula,
we get [tex]m = (-22 ± \sqrt (22^2 + 4(3)(16)))/(2(3))[/tex]≈ -4.07 or 1.24
Therefore, the value(s) for m such that the two vectors are perpendicular are approximately -4.07 or 1.24.
The two vectors u and v are perpendicular if and only if their dot product is equal to zero.
Therefore, to find the value(s) of m such that the two vectors are perpendicular, we need to compute the dot product of u and v as follows: [tex]u.v = (8)(2) + (m)(-3m) + (-22)(m)= 16 - 3m^2 - 22m[/tex]
Setting the dot product equal to zero and simplifying gives:[tex]16 - 3m^2 - 22m = 03m^2 + 22m - 16 = 0[/tex]Solving this quadratic equation for m gives:[tex]m = (-22 \sqrt (22^2 + 4(3)(16)))/(2(3))[/tex]≈ -4.07 or 1.24
Therefore, the value(s) of m that make the two vectors u and v perpendicular are approximately -4.07 or 1.24.
To know more about dot product visit -
brainly.com/question/29097076
#SPJ11
Find the derivative of the function at the point p in the direction of a.
f(x, y, z) = 7x - 10y + 5z, p= (4,2,5), a = 3/7 i – 6/7- 2/7 k
a. 71/7
b. 41/7
c. 31/7
d. 101/7
The derivative of the function at the point p in the direction of a is 71/7.
option A.
What is the derivative of the function?The derivative of the function is calculated as follows;
Df(p, a) = f(p) · a
where;
f(p) is the gradient of f at the point pThe given function;
f(x, y, z) = 7x - 10y + 5z, p= (4,2,5), a = 3/7 i – 6/7- 2/7 k
The gradient of the function, f is calculated as;
f(x, y, z) = (δf/δx, δf/δy, δf/δz)
The partial derivatives of f with respect to each variable is calculated as;
δf/δx = 7
δf/δy = -10
δf/δz = 5
The gradient of the function f is ;
f(x, y, z) = (7, -10, 5)
Df(p, a) = f(p) · a
Df(p, a) = (7, -10, 5) · (3/7, -6/7, -2/7)
Df(p, a) = (7 ·3/7) + (-10 · -6/7) + (5 · -2/7)
Df(p, a) = 3 + 60/7 - 10/7
Df(p, a) = 71/7
Learn more about derivative here: https://brainly.com/question/28376218
#SPJ4
5. Given the hyperbola x^2/4^2 - y^2/3^2 = 1,
find the coordinates of the vertices and the foci. Write the equations of the asymptotes.
6. Express the ellipse in a normal form x² + 4x + 4 + 4y² = 4.
7. Compute the area of the curve given in polar coordinates r(0) = sin(0), for between 0 and For questions 8, 9, 10: Note that x² + y² = 1² is the equation of a circle of radius 1. Solving for y we have y=√1-x², when y is positive.
8. Compute the length of the curve y = √1-x² between r = 0 and r = 1 (part of a circle.)
9. Compute the surface of revolution of y = √1-x² around the z-axis between r = 0 and r = 1 (part of a sphere.) 1
10. Compute the volume of the region obtain by revolution of y=√1-² around the z-axis between z=0 and = 1 (part of a ball.).
The area of the curve given in polar coordinates r(0) = sin(θ), for θ between 0 and π, is π/4.
For the hyperbola x²/4² - y²/3² = 1, the coordinates of the vertices can be found by substituting different values for x and solving for y. When x = ±4, y = 0, so the vertices are (4, 0) and (-4, 0).
The coordinates of the foci can be found using the formula c = √(a² + b²), where a = 4 and b = 3. Therefore, c = √(16 + 9) = √25 = 5. The foci are located at (±5, 0).
The equations of the asymptotes can be written as y = ±(b/a)x, where a = 4 and b = 3. So the equations of the asymptotes are y = ±(3/4)x.
To express the ellipse x² + 4x + 4 + 4y² = 4 in normal form, we need to complete the square for both the x and y terms. Let's first focus on the x terms:
x² + 4x + 4 + 4y² = 4
(x² + 4x + 4) + 4y² = 4 + 4
(x + 2)² + 4y² = 8
Dividing both sides by 8, we get:
[(x + 2)²]/8 + [(4y²)/8] = 1
Simplifying further: [(x + 2)²]/8 + (y²/2) = 1
Now, the equation is in the form [(x - h)²/a²] + [(y - k)²/b²] = 1, which represents an ellipse centered at the point (h, k). Therefore, the ellipse in normal form is [(x + 2)²/8] + (y²/2) = 1.
To compute the area of the curve given in polar coordinates r(θ) = sin(θ) for θ between 0 and π, we need to integrate the function 1/2 r² dθ. Substituting r(θ) = sin(θ), we have: Area = ∫[0, π] (1/2)(sin(θ))² dθ
Simplifying:
Area = (1/2) ∫[0, π] sin²(θ) dθ
Using the trigonometric identity sin²(θ) = (1 - cos(2θ))/2, we have:
Area = (1/2) ∫[0, π] (1 - cos(2θ))/2 dθ
Expanding the integral:
Area = (1/4) ∫[0, π] (1 - cos(2θ)) dθ
Integrating term by term:
Area = (1/4) [θ - (1/2)sin(2θ)] evaluated from 0 to π
Substituting the limits:
Area = (1/4) [(π - (1/2)sin(2π)) - (0 - (1/2)sin(0))]
Since sin(2π) = 0 and sin(0) = 0, the equation simplifies to:
Area = (1/4) (π - 0) = π/4
Therefore, the area of the curve given in polar coordinates r(0) = sin(θ), for θ between 0 and π, is π/4.
To know more about coordinates click here
brainly.com/question/29189189
#SPJ11
Communication True or False: [6 Marks] two or more vectors. 12. The addition of two opposite vectors results in a zero vector. 13. The multiplication of a vector by a negative scalar will result in a zero vector. 14. Linear combinations of vectors can be formed by adding scalar multiples of 15. If two vectors are orthogonal then their cross product equals zero. 16. The dot product of two vectors always results in a scalar. 17. You cannot do the dot product crossed with a vector (u) x w
The addition of two opposite vectors results in a zero vector.
True. When two vectors are opposite in direction, their magnitudes cancel out when added, resulting in a zero vector.
The multiplication of a vector by a negative scalar will result in a zero vector.
False. Multiplying a vector by a negative scalar will reverse its direction but not change its magnitude. It will not result in a zero vector unless the original vector was a zero vector.
Linear combinations of vectors can be formed by adding scalar multiples of two or more vectors.
True. Linear combinations can be formed by adding scalar multiples of two or more vectors. By multiplying each vector by a scalar and then adding them together, you can create a linear combination.
If two vectors are orthogonal, then their cross product equals zero.
True. If two vectors are orthogonal (perpendicular to each other), their cross product will be zero. The cross product of two vectors is only non-zero when the vectors are not orthogonal.
The dot product of two vectors always results in a scalar.
True. The dot product of two vectors results in a scalar value. It is a scalar operation that yields the magnitude of one vector when projected onto the other vector.
You cannot do the dot product crossed with a vector (u) x w.
True. The cross product (denoted by "x") is an operation between two vectors that results in a vector perpendicular to both of the original vectors. It does not work with the dot product, which is an operation between two vectors that yields a scalar.
Learn more about zero vector here: brainly.com/question/31129939
#SPJ11
