Give a nonlinear programming algorithm the task of locating the seam with the least amount of disruption. Your algorithm's utilization of space must be O (mn).
What purposes do algorithms serve today?A set of guidelines or commands known as an algorithm is used to solve difficult problems. Algorithms are utilized by computer software to speed up procedures in many STEM domains. However, algorithms are employed in a wide variety of fields outside of STEM.
The algorithm formula is what?A equation is a collection of numbers or symbols that correlate to a phrase in a language, whereas an engine is a technique for addressing a problem. Due to the fact that it is a technique for resolving quadratic problems, the cubic formula is an algorithm. Formulas almost solely use numbers, whereas algorithms might not even require math.
To know more about algorithm visit:
https://brainly.com/question/22984934
#SPJ4
What are two reasons for physical layer protocols to use frame encoding techniques? (Choose two.) O to reduce the number of collisions on the media to provide better media error correction to increase the media throughput to identify where the frame starts and ends to distinguish data from control information 2. V
To reduce the number of collisions on the media. Frame encoding techniques are used to reduce the number of collisions on the media
By encoding the frames with specific patterns, the receiving device can easily identify when a frame is being transmitted and can avoid collisions with other frames.
To provide better media error correction: Frame encoding techniques also provide better media error correction. By encoding the frames with specific patterns, the receiving device can easily identify when a frame is corrupted and can take corrective action to recover the data. This helps to ensure that the data is transmitted accurately and reliably.
For more questions like Protocols click the link below:
https://brainly.com/question/10983797
#SPJ4
nintendo super mario kart 24 volt battery operated 3-speed drifting ride-on racer up to 8 mph
Answer:
You can get it on ebay
Explanation:
which data link layer protocol defines the process by which lan devices interface with upper network layer protocols? a. mac b. llc c. physical layer d. ip
The correct answer is MAC (Media Access Control).
What is data link layer protocol?
The data link layer is the protocol layer in a program that handles the moving of data into and out of a physical link in a network. The data link layer is Layer 2 in the Open Systems Interconnection (OSI) architecture model for a set of telecommunication protocols.
What is MAC?
The Media Access Control (MAC) protocol is a data link layer protocol that defines the process by which local area network (LAN) devices interface with upper network layer protocols, such as the Internet Protocol (IP).
The MAC protocol is responsible for controlling access to the shared communication medium of the LAN and for providing a reliable link between devices on the LAN. It does this by defining a set of rules and procedures for how devices on the LAN can detect and avoid collisions when transmitting data, as well as for how they can recover from errors that may occur during transmission.
The MAC protocol is typically implemented in hardware, such as in the network interface controller (NIC) of a computer, and is an essential part of the LAN communication process.
Thus, MAC is the correct answer.
To know more about MAC:
https://brainly.com/question/29313724
#SPJ4
Which of the following is an example of a C++ primitive data type? (check all that apply) int Employee struct unsigned int string char
The following is an example of a C ++ primitive data type
intunsigned intchar
All variables in C++ have a data type that specifies the size, range, and type of values that can be stored in the variable. C++ has about seven primitive data types. These include shorts, ints, longs, chars, floats, doubles, and some variants of these data types.
What are C++ primitive and non-primitive data types?
A primitive data structure is a type of data structure that stores only one type of data. A non-primitive data structure is a type of data structure that can store multiple types of data. Examples of primitive data structures are integer, character, and float.
Learn more about primitive data type :
brainly.com/question/179886
#SPJ4
Which of the following services only requires a single port be opened on the firewall?
DHCP
SSH
DNS
RDP
SNMP
FTP
HTTP
Answer:
SSH
Explanation:
what is the difference between protecting against eavesdropping and protecting against a man-in-the-middle (mitm) attack?
Using strong passwords and PINs can guard against MITM attacks, while disabling NFC when in public can stop eavesdropping.
Eavesdropping is made possible by a MitM attack, however MitM can also be used for other malicious tasks including data theft and communication manipulation. It is also possible to allow eavesdropping using various attack methods. Within a local area network, VPNs can be utilized to establish a secure environment for sensitive data. To establish a safe subnet for communication, they employ key-based encryption. In this manner, even if a hacker manages to access a shared network, he won't be able to decrypt the traffic in the VPN.
Learn more about network here-
https://brainly.com/question/14276789
#SPJ4
what would make the motion in a video look smoother
Answer:
There are several techniques that can be used to make the motion in a video look smoother. Here are a few:
Increasing the frame rate: One of the most effective ways to make motion in a video look smoother is to increase the frame rate. This involves capturing and displaying more frames per second, which can help reduce the appearance of "choppiness" or "judder" in the video.
Using a higher shutter speed: Another way to smooth out motion in a video is to use a higher shutter speed. This involves taking shorter exposures when capturing the video, which can help reduce blur and make the motion appear more fluid.
Using a tripod or other stabilizing device: Using a tripod or other stabilizing device can help keep the camera steady and reduce the appearance of camera shake in the video. This can make the overall motion in the video look smoother and more stable.
Applying image stabilization: Many cameras and video editing software have image stabilization features that can help smooth out motion in a video. These features use algorithms to analyze the video and automatically correct for any camera shake or other motion artifacts.
Using motion graphics: Motion graphics can be used to smooth out transitions between shots or to add visual interest to a scene. This can help make the overall motion in the video look more polished and professional.
Explanation:
one of these features, when enabled, associates event data collected from users on their app or website with the accounts of users who are signed in and have agreed to share this information. which is it?
app or website with the accounts of users who are signed in and have agreed to share this information is called cross-device tracking.
What does this feature do?This feature allows app or website developers to track the actions of users across multiple devices and associate them with the user's account, provided that the user has agreed to share their data and is signed in to their account.
This can be useful for providing a seamless and personalized experience for users across different devices, and for gathering insights about user behavior.
However, it is important to obtain user consent and to handle user data in a responsible and transparent manner when using cross-device tracking.
To Know More About device tracking, Check Out
https://brainly.com/question/28234334
#SPJ4
how many subnets are there? suppose that we only want to support a maximum of 16 hosts (with 16 assignable ips) on a subnet, list those subnets in the form a.b.c.d/x where x is the subnet mask.
192 subnets are there if we only want to support a maximum of 16 hosts (with 16 assignable ips) on a subnet.
What is subnet?A subnet, sometimes known as a subnetwork, is a segment of a larger network. Subnets are logical divisions of an IP network that divide it into numerous smaller network parts. The Internet Mechanism (IP) is a protocol that allows data to be sent from one computer to another through the internet. A subnet, often called a subnetwork, is a network within a network. Subnetworks increase network efficiency. Subnetting allows network traffic to go a shorter distance without passing through unnecessary routers.
To know more about subnet,
https://brainly.com/question/15055849
#SPJ4
the scan scheduling algorithm . a) services the request with the minimum seek time b) services the request next to the current head position in the direction of the head movement c) chooses to service the request furthest from the current head position d) services the request next to the current head position in the opposite direction of the head movement
The scan scheduling algorithm is services the request with the minimum seek time
What is meant by Scan scheduling algorithm ?A disc scheduling method called the scan responds to requests made by the memory management unit. An elevator algorithm is another name for it. This algorithm requires the read and write heads to travel in unison while completing all requests up until they reach the disk's edge.
Elevator algorithm is another name for the SCAN disc scheduling technique. This allows the head or pointer to move in either direction, with the disc arm moving from one end of the disc to the other and handling all requests along the way.
The Elevator Algorithm is another name for it. The disc arm in this method moves in a specific direction till the very end.
To learn more about Scan scheduling algorithm refer to :
https://brainly.com/question/13013797
#SPJ4
the it director at your organization has asked you to come up with a way to provide a secure connection to the network for employees that work from home. what should you recommend?\
There are several options for providing a secure connection for remote employees to connect to the network like Virtual Private Network (VPN), Remote Desktop Protocol (RDP), Cloud-based solutions.
Explanation in Detail:
Virtual Private Network (VPN): A VPN creates a secure, encrypted connection between the employee's device and the organization's network. This allows the employee to access network resources as if they were on-site.Remote Desktop Protocol (RDP): RDP allows employees to remotely access a desktop on the organization's network. This can be a good option for employees who need to use specific applications that are only available on-site.Cloud-based solutions: Cloud-based solutions such as Microsoft Azure or Amazon Web Services (AWS) can provide secure remote access to network resources. These solutions allow employees to access network resources through a web browser or client application.It's important to consider the security implications of each option and choose the one that best fits the needs of the organization. It may also be a good idea to implement multiple solutions to provide flexibility and redundancy for remote access.
To learn more about Virtual Private Network (VPN), visit: https://brainly.com/question/29571668
#SPJ4
ciara has created a shell script that works just fine in the shell where she developed it. however, when she tries to execute it in a subshell some of the environment variables don't seem to be correct. how can she resolve this issue?
Answer:
There are several potential reasons why environment variables might not be set correctly in a subshell when running a shell script. Here are a few potential solutions that Ciara could try to resolve this issue:
Check the syntax of the script: Ciara should make sure that the script is correctly formatted and that there are no syntax errors that might be causing problems.
Use the "source" command: Ciara can try running the script using the "source" command, which will execute the script in the current shell rather than in a subshell. This can help ensure that the environment variables set by the script are available in the current shell.
Export the environment variables: If Ciara wants to set environment variables that will be available in subshells, she can use the "export" command to make the variables available in subshells. For example, she can use "export MYVAR=value" to set the MYVAR environment variable.
Use absolute paths: If the script references files or directories using relative paths, these paths might not be correct when the script is run in a subshell with a different working directory. Ciara can try using absolute paths to ensure that the script can find the correct files and directories.
Check the permissions: Ciara should make sure that the script has the correct permissions and that she has permission to execute it.
I hope these suggestions help you. Let me know if you have any other questions.
write a recursive method to find the gcd write a test program that prompts the user to enter two integers
To write a recursive method to find the GCD and to write a test program that prompts the user to enter two integers, check the code given below.
What is recursive method?a process or algorithm that uses one or more loops to repeat steps. recursive method or algorithm that calls itself once or more with various arguments. Basic case a circumstance that prevents a recursive method from calling itself again.
//C program for adding the sum of series 1+1/2+1/3+1/4+.............
#include <stdio.h>
//Recursive function
float m(int i,int x, float sum)
{
//float Series_Sum=0;
if(i > x)
return sum;
else
sum=sum+(float)1/i;
return m(i+1,x,sum);
}
//Main function
int main()
{
int x;
float Sum=0;
printf("Enter numbers of terms of the series to be added : ");
scanf("%d",&x);
//function call
Sum=m(1,x,0.0);
printf("The Sum of terms = %.2f",Sum);
return 0;
}
Learn more about recursive method
https://brainly.com/question/29309558
#SPJ4
100base-tx can be configured as either half-duplex or full-duplex. when operated in the full-duplex switched configuration, csma/cd is not required. true false
Both half-duplex and full-duplex configurations are possible with 100base-tx. Csma/cd is not necessary when operating in the full-duplex switching setup. So the statement is true.
What is full duplex ?A point-to-point duplex communication system consists of two or more connected parties or devices that are capable of two-way communication.Full-duplex data transmission allows for simultaneous data transmission in both directions along a signal carrier. Full-duplex transmission calls for a bidirectional line that can carry data simultaneously in both directions.Half-duplex. The systems at either end of the connection must alternate delivering data over the communication medium for these channels to enable bidirectional conversations. A walkie-talkie-style push-to-talk radio connection is the most well-known example of a half-duplex communication channel. In this sort of connection, communicating parties take turns sending and signal when their transmissions are finished before the other can communicate.To learn more about full-duplex refer :
https://brainly.com/question/15219093
#SPJ1
What method is used to manage contention-based access on a wireless network?
CSMA/CD
priority ordering
CSMA/CA
token passing
The method that is used to manage contention-based access on a wireless network is option C: CSMA/CA.
Can you use CSMA CD on a wireless network?CSMA/CA is the ideal management protocol for connection-based networks. Major applications of CSMA/CD include Ethernet and Token Ring connections in wired networks.
Instead of attempting to prevent collisions, CSMA/CD directs network users on what to do if one does happen. The CSMA/CD protocol is embedded into half-duplex Ethernet networks to stop collisions before they happen.
This is due to the fact that several stations in wireless networks frequently have access to the same access point but not to one another. The installation of a Wireless Access Point (WAP) is essential. Request to Send/Clear to Send (RTS/CTS) is a CSMA/CA feature that is used in conjunction with a WAP.
Therefore, In wired networks, CSMA/CD is utilized but CSMA/CA is frequently used in wired networks, It merely cuts down on healing time.
Learn more about wireless network from
https://brainly.com/question/26956118
#SPJ1
when the final value of an expression is assigned to a variable, it will be converted to
When an expression is evaluated, the result is a value which can be of any data type (e.g. number, string, boolean, etc.). When this value is assigned to a variable, it is converted to the data type of the variable.
When the final value of an expression is assigned to a variable, it will be converted to:
The data type of the variable.This value can then be assigned to a variable, in which case it will be converted to the data type of the variable. This is an important concept to understand, as it can have a big impact on how a program functions, as variables of different data types can behave differently. Knowing when and how to convert an expression result to the correct data type can help make a program more efficient and accurate.
Learn more about Data variable: https://brainly.com/question/16397886
#SPJ4
what is the purpose of a method? group of answer choices store the data for all objects created by the same class enables changes in the implementation without affecting users of a class provide comments about the program implementation to access the instance variables of the object on which it acts
A method is an area of code that only runs when it is called. A method can accept parameters that are data.
Explain about the method in code?
A method in object-oriented programming is a computer program that is defined as a component of a class and is present in every object that belongs to that class. It is possible for a class to contain many methods.
A section of code known as a method only executes when it is called. Parameters are pieces of information you can pass into a method. Functions are another name for methods, which are used to carry out certain operations.
In classes, methods are similar to functions, subroutines, and algorithms. While loops, for loops, and other programming constructs can all be used as methods. A method can change an object's attribute values.
To learn more about method in code refer to:
https://brainly.com/question/27415982
#SPJ4
5.2.4 calculate the total number of bits required for the cache listed above, assuming a 32-bit address. given that total size, find the total size of the closest direct-mapped cache with 16-word blocks of equal size or greater. explain why the second cache, despite its larger data size, might provide slower performance than the first cache.
Number of bits in a cache = 2588672 bits
Cache with 16- word block of equal size or greater =4308992
What is bits?
Beginning with Windows 2000, the Background Intelligent Transfer Service (BITS) is a feature of Microsoft Windows that enables both peer-to-peer file transfers and the downloading of content from servers.
To calculate the number of bits required for the cache containing 32- bit address.
formula to calculate the bits is :
Number of bits in a cache
( 2indexbits) * ( validbits + tagbits + ( databits * 2 f f setbits )
total bits = 215 ( 1 + 14 + ( 32 * 2¹ ) = 2588672 bits
Cache with 16- word block of equal size or greater
total bits = 2¹ 3 ( 1 + 13 + ( 32 * 2⁴ ) = 4308992
Learn more about bits
brainly.com/question/2545808
#SPJ4
Division by zero when the program is executing is an example of a _____________ error.
Division by zero when the program is executing is an example of a runtime error.
Since dividing by zero is not a specified operation, the program cannot be performed at runtime since it lacks the necessary valid code, which results in a run-time error. Runtime errors are errors that happen while a program is being executed.
There are various forms of runtime errors, such as logic errors that result in inaccurate output. Runtime errors also include memory leaks.
These mistakes—also referred to as "bugs"—can be corrected with quick updates or minor patches created just for the purpose.
Know more about runtime error here:
https://brainly.com/question/13106116
#SPJ4
you are trying to connect from outside the company network to a server inside the company network using rdp (remote desktop connection). however, the connection is failing.which network device does your network administrator most likely need to configure to allow this connection?
To check the connectivity to the remote computer, you can use ping, a Telnet client, and PsPing on your local computer. Remember that if ICMP is prohibited on your network, ping will not function.
What is ICMP ?Error reporting is the main function of ICMP. When two devices connect over the Internet, the ICMP creates errors to share with the transmitting device in the case that any of the data did not arrive to its intended destination.
For instance, if a data packet is too big for a router, the router will drop the packet and return the data source with an ICMP message.
Network diagnostics are another application of the ICMP protocol; ICMP is used by the widely-used terminal programs traceroute and ping.
The routing path between two Internet devices is seen using the traceroute tool.
Hence, To check the connectivity to the remote computer, you can use ping, a Telnet client, and PsPing on your local computer. Remember that if ICMP is prohibited on your network, ping will not function.
learn more about ICMP click here:
https://brainly.com/question/10124043
#SPJ4
To achieve server scalability, more servers may be added to a configuration and make use of:
layer 2 routing
reverse proxying
load balancers
proxy caching
layer 3 switching
Answer:
To achieve server scalability, more servers may be added to a configuration and make use of load balancers.
buffering in i/o is used to a) cope with a speed mismatch between the producer and consumer of a data stream. b) provide adaptations for devices that have different data-transfer sizes. c) support copy semantics for application i/o. d) all of the above.
Buffering in i/o is used to cope with a speed mismatch between the producer and consumer of a data stream.
What is the purpose of buffering?Reasons for Buffering:As communicated data travels between devices or between a device and an app, the buffer temporarily stores information. In a computer system, a buffer refers to a specific quantity of data that will be saved in order to preload the necessary data just before the CPU uses it. Buffering I/O the act of transmitting data between a CPU and a peripheral and temporarily storing it. The common goal is to even out the disparity between the two devices' data handling speeds. An electronic dictionary,Buffering I/O.Buffering in i/o is used to cope with a speed mismatch between the producer and consumer of a data stream.To learn more about Buffering refer to:
https://brainly.com/question/9853169
#SPJ4
how can you clear a check from a checkbox object?
The is Selected() function over the checkbox element can be used to determine whether a checkbox is ticked or unchecked. If the checkbox is selected, the is Selected method returns a Boolean value of true; otherwise, it returns a false value.
How is a checkbox unchecked?If this attribute already exists, we may alter its value to checked=true to make the checkbox checked and checked=false to make the checkbox unchecked by using the jQuery function prop().
In what way does one check a box?To select the checkbox, first use a DOM method like getElementById() or querySelector(). Next, access the checked attribute of the checkbox element. If the checked property's value is true, the checkbox is selected; if not, it is not.
To know more about checkbox object visit:-
https://brainly.com/question/28404884
#SPJ4
u are using windows 10 professional and you have a hardware component that is no longer needed. you do not want to delete the drivers but you do not want them active. what can you do to the drivers?
Make use of Device Manager to upgrade the drivers.
How do I remove and reinstall Windows 10 drivers?Enter "device manager" into the taskbar's search box, and then select "Device Manager." Select Uninstall by right-clicking (or pressing and holding) the device's name. Reboot your computer. The driver will be reinstalled by Windows.
How would I drive a gadget to uninstall?Start by typing Remove into the Windows+ I keyboard shortcut to open Settings. Choose to add or remove applications. Select uninstall if the driver or device package you want to remove is on the program list.
How do I remove Windows 10 without having to reinstall it?Follow the wizard to complete the process by selecting "Settings" from the Windows menu, then selecting "Update & Security," "Reset this PC," "Get started," "Remove everything," and "Remove files and clean the drive."
To learn more about Device Manager here
https://brainly.com/question/11599959
#SPJ1
the investigation phase of the sdlc involves specification of the objectives, constraints, and scope of the project.
The inquiry phase of the systems development life cycle(SDLC) involves specification of the objectives, constraints, and scope of the project.
Which of the following SDLC phases is typically regarded as the longest?The Implementation phase is the longest and most expensive step of the systems development life cycle (SDLC) The inquiry phase of the systems development life cycle (SDLC) involves specification of the objectives, constraints, and scope of the project. A data custodian is accountable for the preservation, upkeep, and security of the data and collaborates directly with data owners.The Operations and Maintenance Phase is the most time-consuming and expensive phase of the system's lifespan because it is during this time that the information system is most valuable to the organization.To learn more about systems development life cycle refer to:
https://brainly.com/question/15696694
#SPJ4
What is the first thing you should do to get toner dust off your clothes?
clean immediately with hot water
use a hot hair dryer to blow it off
throw the clothes in the dryer set on high heat
use a can of compressed air to blow off the toner
use a can of compressed air to blow off the toner is the first thing you should do to get toner dust off your clothes.
What is toner?Toner is a powder combination that is used in laser printers and photocopiers to generate printed text and images on paper, often via a toner cartridge. While ink is still quite expensive to replenish or replace, toner powder has become significantly less expensive over time. Because inkjet cartridges frequently need users to replenish or replace them before they are totally empty, this makes it more efficient and less wasteful. Ink or toner is used by printers to create pictures on paper or other media. The most significant distinction between ink and toner is that each operates with a different type of printer. Inkjet printers use ink, whereas laser printers use toner, but the distinctions don't end there.
To know more about toner,
https://brainly.com/question/14528219
#SPJ1
When a function is called, flow of control moves to the function's prototype.
Select One:
TRUE
False
False The prototype of a function receives control when it is invoked. Sequential flow or sequence logic
Control structures are only a means of defining the direction of control in programmes. Any algorithm or function or programme that makes use of self-contained modules known as logic or control structures will be easier to understand and comprehend. On the basis of particular criteria or situations, it essentially examines and selects the direction in which a programme runs. The three fundamental categories of logic, or flow of control, are as follows:
Sequential flow or sequence logic
Conditional flow or selection logic
Repetitive flow or iteration logic
As the name implies, sequential logic follows a serial or sequential flow, and the flow is determined by the set of instructions that are delivered to the computer. The modules are performed in the obvious order unless further instructions are specified.
Learn more about Function here:
https://brainly.com/question/28939774
#SPJ4
a smart home design requires the use of an iot device called a smoke detector. you add the device but you need information about the features and usage of this device. how would you get that information?
In the URL box, enter 192.168.25.1 and then press the Go button to connect to the Home Gateway. Click Submit after entering admin as the login and password.
What makes a home a smart home?Residents of a smart house can remotely manage lighting, appliances, thermostats, and other devices by using a smartphone, tablet, and an internet connection. Smart homes can be set up via wireless or hardwired systems. Thanks to smart home technologies, homeowners can experience convenience and financial savings.
A smart house is one that uses internet-connected devices to enable remote monitoring and control of systems and appliances, such as lighting and heating.
When not in use, TVs and appliances can turn themselves off. Additionally, programmable thermostats can be set to maintain comfort levels and turn off when they are being used excessively. Smart home systems boost energy efficiency, making homeowners feel more responsible and allowing them to save more money.
To learn more about Smart home refer to :
https://brainly.com/question/17471512
#SPJ4
your orchestration tool allows you to enter through its api the desired app contrainer infrastructure documentation. it later uses this documentation for build automation. what is this process of documenting called?
The process of documenting the desired infrastructure for an application container is often referred to as infrastructure as code (IaC). Using an orchestration tool that allows you to enter the desired infrastructure documentation through its API is a common way to manage IaC.
What is Infrastructure as code (IaC)?
IaC refers to the practice of using code to define and manage the infrastructure for an application, rather than manually configuring the infrastructure through a web interface or by running commands. This documentation can be used to automate the build and deployment process for the application container.
IaC is a powerful technique that can help organizations to improve the reliability, security, and scalability of their applications, while also reducing the time and effort required to manage the infrastructure. It is an important part of many modern software development practices, and is widely used in the deployment of containerized applications.
To know more about Infrastructure as code (IaC), visit: https://brainly.com/question/29558640
#SPJ4
. an index such as the p that indexes ptbr[ p ] is using 12 bit. how many different index values can be sustained ? an index value is a non-negative integer starting with 0 through the max possible value it can sustain.
The page is 256 bytes in size; There are 256 pages in the 64-bit space; Additionally, an 8-bit page offset and an 8-bit page number are part of a 16-bit address.
How many entries are there in the page tables for the first and second levels?256 entries are contained in the first level page table using the aforementioned subdivision, with each entry linking to a second level page table. Each entry in a page table at the second level points to a table at the third level. There are 256 entries on a third-page table, each pointing to a different page.
How many entries are required for a linear page table with one level?Each page requires one entry for the page table. We can see that the 232 byte address space needs to be divided into 220 pages if we assume a 4GB virtual and physical address space and a page size of 4kB (2,12 bytes). As a result, there must be 220 entries in the page table.
To learn more about page table here
https://brainly.com/question/29455328
#SPJ1
