Select the ΔH values associated with the dissolution of lithium chloride that are exothermic.
Check all that apply.
ΔH1: energy associated with the separation of water molecules
ΔH2: energy associated with the separation of LiCl ions
ΔH3: energy associated with the formation of water-ion interactions
ΔHsoln: the enthalpy of solution

Solution b has a hydronium ion concentration of 1.9 x 10-4m has has the greater hydronium ion concentration. The pH value increases with the concentration of hydronium ions in a solution.

Acidic chemicals result from high hydrogen ion concentrations, while alkaline substances come from low hydrogen ion concentrations (basic substances). The pH scale can be used to quantify the overall concentration of hydrogen ions, which is inversely related to pH. When an acid dissolves in water, the hydronium ion is always produced. Always interacting with the nearby water molecule to generate H3O+, the acid's H+. Consider the hydronium ion from the perspective of the proton (H+), which is another way to perceive it. Hydration is the process of adding water to something.

pH equals -log[H3O+]. The reverse of the mathematical method used to determine the pH can be used to determine the hydronium ion concentration from the pH.

Learn more about hydronium ion here:

brainly.com/question/14619642

#SPJ4

The reactants are in the aqueous phase, while the product is in the solid phase and water is in the liquid phase.

Aqueous phase is a term used to describe a solution in which water is the solvent. This type of solution is commonly used in chemistry, as water is an excellent solvent for many different types of compounds. In an aqueous solution, the molecules of the solute are dissolved into the water molecules and are then evenly distributed throughout the solution. This process is driven by the strong intermolecular forces between water molecules, which allows them to attract and form strong bonds with other molecules.

Mo^3+(aq) + 3e⁻ → Mo(s)
The balanced redox reaction takes place in an acidic solution, so H+ ions are also consumed in the process. Therefore, the balanced equation is:
Mo^3+(aq) + 3H+(aq) + 3e⁻ → Mo(s) + 3H2O(l)
The reactants are in the aqueous phase, while the product is in the solid phase and water is in the liquid phase.

To learn more about aqueous phase
https://brainly.com/question/13184491
#SPJ4

Sort the atoms in order of proximity to one another. The atom with the lowest group number should be positioned in the middle since it has the lowest electronegativity. If the group number of two atoms is the same

Of Lewis structures, the valence electrons of the atoms in a molecule are shown. They are also known as electron dot structures or Lewis dot structures.

The valence electrons of atoms and molecules are easier to visualize using these Lewis symbols and structures. An extremely simplified representation of a molecule's valence shell electrons is provided by a Lewis Structure. It serves to illustrate how certain atoms are surrounded by electrons in a molecule.

To know more about Lewis structure visit:

https://brainly.com/question/4144781

#SPJ4

NaCl is an ionic compound, as stated in the second sentence on each of the substances.

Intermolecular forces operate between molecules. In contrast, intramolecular pressures are produced by molecules themselves. Intermolecular forces are less powerful than intramolecular forces. Intermolecular forces include the Interatomic force, particle contact, ion-dipole involvement, and interactions by van der Waals to name a few.

The two primary categories of intermolecular interactions are attracting forces as well as repulsive forces. Electrostatic forces are principally responsible for the attraction. The connection between four or more material elements, nevertheless, could also be caused by other factors.

To know more about Intermolecular force visit:

https://brainly.com/question/12243368

#SPJ4

Option C: Neutron is the subatomic particles that could be changed without changing the identity of the atom.

The number of protons in an atom is indicated by the atomic number. As a result, when the amount of protons changes, the atomic number also changes, changing the element's identity. An element's atomic mass changes when its neutron count is altered, but its identity is preserved. An element's charge changes as its electrons are lost or acquired, but its identity is unaffected. Thus, option C is the correct choice.

Protons, neutrons, and electrons are the three subatomic particles that make up an atom. Neutrons are neutrally charged particles, whereas protons are positively charged. The opposite of this is true of electrons, which have a negative charge. Protons and neutrons are found in the nucleus of an atom. An element's atomic number allows it to be recognised from other elements.

To know more about subatomic particles, refer to the following link:

https://brainly.com/question/18490374

#SPJ4

Complete question is:

In order to change the mass number of a given atom, which of the subatomic particles below could we change the number of without changing the identity (element) of the atom

a. electron

b. proton

c. Neutron

Answer:

Mg + CuO2 = MgO + Cu+

Zn + MgO= ZnO + Mg

Zn + Cuso4 = ZnS + SO2 + Cu

what are the conditions for reaction like are they cocentrated?

Answer: The concentration fluctuates between high and low during the reaction.

Explanation: In a chemical reaction, the reactants are converted into products and the concentrations of the species involved in the reaction change over time. The proposed mechanism describes how the reaction occurs, and it can give an insight into how the concentrations of the species change during the reaction.

When the reaction starts, the concentration of reactants is high, and the concentration of products is low. As the reaction progresses, the reactants are consumed, and the products are formed. The concentration of reactants decreases, and the concentration of products increases.

At some point, the rate of the forward reaction is equal to the rate of the reverse reaction, and the reaction reaches equilibrium. At equilibrium, the concentrations of the reactants and products remain constant, and the reaction proceeds at a steady state.

Therefore, based on the proposed mechanism, the concentration of the species represented in the equation fluctuates between high and low during the reaction, as the reactants are consumed, and the products are formed, until reaching the equilibrium state.

100g of ice will require 33,400 J to melt because the specific heat required to melt ice is 334 J/g. Since water has a specific heat of vaporization of 2230 J/g, evaporating 100g of water will require 223,000 J.

Heat is the result of the movement of kinetic energy from one media or item to another, or from the energy source to either a medium or object. Radiation, conduction, & convection are the three possible mechanisms for this type of energy transmission.

The equation q = mcT, where m is the sample mass, c is the specific heat, and T is the temperature change, can be used to determine how much heat is absorbed or lost by a sample (q).

To know more about Heat visit:

https://brainly.com/question/1429452

#SPJ4

Classification of given amino acids are done according to question.

Part A: Leucine: Neutral nonpolar

Asparagine: Neutral polar

Glutamine: Neutral Polar

Alanine: Neutral Nonpolar

Arginine: Basic

Part B:

Methionine: neutral nonpolar

Proline: Neutral Nonpolar

Serine: Neutral polar

Lysine: Basic

Phenylalanine: neutral nonpolar

Unlike non-essential amino acids, your body cannot make BCAAs, so they are regarded as essential. As a result, it is imperative to include them in your diet. Leucine, isoleucine, and valine make up the trio of BCAAs. They are all thought to be necessary for the human body and all have branched molecular structures.

More than one -COO⁻ group can be found in the structures of basic amino acids, while more than one NH₃⁺ group can be found in the structures of acidic amino acids. An amino acid becomes polar when it contains polar side chains like -OH or amide.

To know more about amino acids visit:

https://brainly.com/question/28474317

#SPJ4

Answer:

infinitely solutions

Explanation:

if it's the same thing on both sides its infinitely solutions

The one among the following aqueous salts will electrolysis produce hydrogen gas and oxygen gas is the B) NaF.

The electrolysis is the process in which the electricity to split the water in to the hydrogen and the oxygen is takes place. The decomposing of the ionic compounds in to the elements by passing through the electricity.

The reaction at the cathode : 2H⁺ + 2e⁻  -->   H₂

The reaction at the anode : 2H₂O ---->   O₂  +   4H⁺  +  4e⁻

The hydrogen gas is liberated at the cathode. The Oxygen gas is liberated at the anode.

Thus, the correct option is B) NaF.

To learn more about electrolysis here

https://brainly.com/question/29751161

#SPJ4

1 mole of argon and 16.0g of oxygen gas has 6.02 x 10^23 atoms. Thus Option A and Option D are the answers.

A mole is a unit of measurement used in chemistry to represent the amount of a substance. It is defined as the number of entities (atoms, molecules, ions, etc.) in a substance that is equal to Avogadro's number, which is 6.02 x 10^23.

This number is the same for any substance, regardless of its atomic or molecular weight. The mole is used to convert between mass and number of atoms or molecules.

For example, 1 mole of a substance contains 6.02 x 10^23 atoms or molecules, and the mass of 1 mole of a substance is its molar mass, which can be found from its chemical formula or atomic weight. In the case of the options presented, 1 mole of argon and 16.0g of oxygen gas both contains 6.02 x 10^23 atoms, which is the Avogadro's number.

Learn more about Atoms:

https://brainly.com/question/13654549

#SPJ4

The one would from a precipitate when mixed with the aqueous solution of Ba(NO₃)₂ is Na₂SO₄.

The  Na₂SO₄ with the Ba(NO₃)₂ would form the precipitate when mixed in the aqueous solution. The reaction is given as :

Ba(NO₃)₂(aq)  +  Na₂SO₄(aq)   ---->    BaSO₄(s)  +  2NaNO₃(aq)

The BaSO₄ is the  insoluble specie form in this reaction. The ionic equation is written as follows :

Ba²⁺  +  2NO₃⁻  +  2Na⁺  +  SO₄²⁻  ---->   BaSO₄  +  2Na⁺  +   NO₃⁻

The BaSO₄ is insoluble and form as a precipitate . It does not froms the ions in the solid state.

Thus , the correct option is A)  Na₂SO₄.

To learn more about precipitate here

https://brainly.com/question/30245583

#SPJ4

Two factors determine how strong the coulombic attraction is: the dimensions of an atom. the atom's overall charge.

Why do smaller ions coulombically attract water more strongly than larger ions?

using the law of Coulomb. The water molecules find it more difficult to separate the ions from one another the smaller the ions are and the closer together they are. The more charged the ions are, the more difficult it is for the water to also remove them.

How does the size of an atom change due to coulombic attraction?

The atomic radius will shrink when the valence electrons are drawn in closer to the nucleus due to a higher force of attraction between the nucleus and the valence electrons.

To know more about coulombic attraction vist:

https://brainly.com/question/15173422

#SPJ4

Answer:4.7374*10^23 atoms

Explanation:

Number of atoms in 144.6g tungsten,

Moles=Given mass/molecular mass

n=144.6/183.84

n=0.7865

Number of atoms=n*Na

Number of atoms=0.7865*6.023*10^23

Number of atoms=4.7374*10^23

He (c). He has the highest average kinetic energy per mole at 298 K.

Kinetic energy is the energy of motion. It is energy that an object has because of its motion. Kinetic energy can be found in both moving objects and particles, such as a ball rolling down a hill, a car moving down a highway, or electrons moving around an atom. Kinetic energy is determined by the mass of the object and its velocity.

Because it has the most number of atoms per mole compared to the other gases listed (2 atoms per mole for He, compared to 2 atoms per mole for H2, 16 atoms per mole for H2O, and 32 atoms per mole for CO2). The higher number of atoms per mole means more kinetic energy per mole, resulting in He having the highest average kinetic energy per mole.

To learn more about kinetic energy
https://brainly.com/question/7694005
#SPJ4

Answer:

Explanation:

15.0 mL of vinegar is equivalent to 15.0 g of vinegar, since the density of vinegar is 1.0 g/mL. Vinegar is composed of mostly acetic acid (CH3COOH) and water. The density of acetic acid is 1.05 g/mL, so 15.0 mL of vinegar is equivalent to approximately 14.3 g of acetic acid.

The balanced equation for the reaction between sodium bicarbonate (baking soda) and acetic acid is:

NaHCO3 + CH3COOH → NaCH3COO + H2O + CO2

For every mole of acetic acid, we need one mole of sodium bicarbonate. We can use the molar mass of acetic acid (60.05 g/mol) and sodium bicarbonate (84.01 g/mol) to calculate the amount of baking soda needed.

14.3 g of acetic acid x (1 mol/60.05 g) = 0.238 mol acetic acid

0.238 mol acetic acid x (84.01 g/mol) = 19.9 g baking soda

Therefore, 19.9 g of baking soda is needed to react with the 15.0 g of acetic acid in 15.0 mL of vinegar.

A positron is a particle emitted from the nucleus that has a positive charge and same mass as an electron.

An electron is a subatomic particle with a negative charge that can be free or bound to an atom. One of the three primary types of particles found within an atom is an electron that is bound to it; the other two are protons and neutrons.

A positron is the antiparticle of an electron. This means that it has the same mass as an electron but has the opposite charge. The mass of a particle is determined by the properties of the particle itself, while the charge is determined by the interaction of the particle with other particles or fields. The fact that positrons have the same mass as electrons but have a positive charge is a fundamental property of the universe and is a result of the symmetries that govern the behavior of subatomic particles.

To know more about subatomic particles, visit:

https://brainly.com/question/29765133

#SPJ4

Electron domain geometry of the central chlorine atom in this molecule has one lone pair on the core Cl atom, due to it's existence the structure of HClO3 has a trigonal pyramidal.

Trigonal planar bond angle is 1200. But because there are numerous double bonds and lone pairs, the bond angle around the core Cl atom is less than 1200.

Two single bonds and two nonbonding lone pairs make up the four domains of H2O. The steric number is another name for the electron domain. The configuration of the electron domains that surround the primary atom in a molecule or ion is known as the electron domain geometry.

The formal precursor of chlorate salts is chloric acid, often known as HClO3, which is an oxoacid of chloride.

Learn more about Electron domain geometry here:

brainly.com/question/18612295

#SPJ4

The potential energy of CO2 just increases.

Potential energy is the energy that exists in an object because of the object's location in a force field.

The elements that influence the existence of potential energy are gravity, the mass of objects, and the height of objects.

The characteristics of potential energy are as follows.

- Every object that has gravitational potential energy can do work or work, if the object is towards the surface of the Earth.

- Potential energy is affected by the acceleration due to gravity and the height of the object.

- The higher and the greater the mass of an object, the greater the potential energy.

- If the object is above the ground, then the potential energy is zero.

- Potential energy possessed by objects because of their position relative to the earth.

Learn more about potential energy at https://brainly.com/question/24284560.

#SPJ4

The group 1 has a higher efficiency because group 1 has a higher output power.

Efficiency in chemistry is a comparison of the energy input and output in a specific system. Its definition is given by the equation and is expressed as the proportion of output to input energy: The representation of energy in the form of heat or power using this equation is quite common.

Efficiency is a function of input and output. Including waste and spoilage, output is the total amount of productive work completed (or work output). To create a percentage, efficiency is simply multiplied by 100.

To know more about power visit:

https://brainly.com/question/287674

#SPJ4

Sea level rise, ocean heat waves, coral bleaching, and the melting of ocean-terminating glaciers and ice sheets around Greenland and Antarctica are all effects of rising ocean heat content.

About 90% of the heat produced by growing emissions has already been absorbed by the ocean as of today. Unprecedented cascade repercussions result from the ocean's temperature shift as a result of the extra heat and energy.

Sea surface temperatures are rising and the sea level is rising as a result of the oceans absorbing more heat as a result of greenhouse gas emissions. Climate patterns will shift as a result of changes in ocean temperatures and currents brought on by climate change.

To know more about terminating visit :

https://brainly.com/question/15298320

#SPJ4

Answer:

Unlike protons and neutrons, which are located inside the nucleus at the center of the atom, electrons are found outside the nucleus. Because opposite electric charges attract each other, negative electrons are attracted to the positive nucleus.

Al2O3 does not use Greek prefixes since it is an ionic compound, while N2O3 does use Greek prefixes since it is a molecular compound.

A molecular compound is a chemical compound consisting of two or more atoms held together by covalent bonds. Covalent bonds are formed when atoms share one or more of their electrons with another atom in order to complete their outer electron shell.

The main difference between Al2O3 (aluminum oxide) and N2O3 (dinitrogen trioxide) is that Al2O3 is an ionic compound (made up of charged ions) and N2O3 is a molecular compound (made up of covalently bonded molecules). Therefore, the naming conventions for these two types of compounds are different. For ionic compounds, the name includes the names of the cation and anion (aluminum and oxide, respectively) and their charges (Al2+ and O3-). For molecular compounds, the prefixes are taken from the Greek language to indicate the number of atoms of each element in the molecule (di- for two nitrogen atoms and tri- for three oxygen atoms). Therefore, Al2O3 does not use Greek prefixes since it is an ionic compound, while N2O3 does use Greek prefixes since it is a molecular compound.

To learn more about molecular compound
https://brainly.com/question/2671865
#SPJ4

8.0 grams are created when 2.5 grams pure hydrogen gas and 7.0 gram of carbon monoxide react.

Colorless and odorless, monoxide (CO) seems to be a gas. It is emitted by a number of combustion, including as cars, electric utilities, wildfires, and incinerators, and it is caused by the fuel burning of carbon-containing fuels like oil and gas, gasoline, etc wood.

A substance called carbon cyanide is created when shale gas or other carbon-containing materials are burned partially. This includes production emissions, fires, malfunctioning heaters, and exhaust.

Gram to mole conversion,

Grams * (1 mol)/ grams "

Moles of CO,

= 7.0 g*(1 mol)/(28.01 g)

= 0.249 mol CO

Moles of H2,

= 2.5 g*(1 mol)/(2.016 g)

= 1.240 mol O2

Mass of methanol,

0.249 mol CO * (1 mol CH3OH) /mol CO*

= 1mol CH3OH /32.04gCHOOH

=0.0077 mol CH3OH

= 0.008 molCH3OH

= 8.0 grams

To know more about carbon monoxide visit:

https://brainly.com/question/2484413

#SPJ4

Answer:

8.0

Explanation:

I took the test

[tex]\boxed{\boxed{\Large\textsf{$\sf mass = 3.4 \times 63.02=214.3$ g (4 s.f)}}}[/tex]

The mass of nitric acid (HNO₃) can be determined by considering the relationship between number of moles, mass, and molar mass:

[tex]\boxed{\large\textsf{$\sf\displaystyle number\ of\ moles\ (mol)=\frac{mass\ present\ (grams)}{molar\ mass\ (g/mol)}$}}[/tex]

Rearranging this formula to find mass, therefore, mass present = number of moles ÷ molar mass:

[tex]\boxed{\large\textsf{$\sf\displaystyle mass=moles\times molar\ mass$}}[/tex]

Since we are already given the number of moles of HNO₃ present, we just need the molar mass. The molar mass of elements can be found on any standard periodic table, and the molar mass of a compound is just the sum of all the molar masses of the elements in the compound.

∴ molar mass HNO₃ = H (1.008) + N (14.01) + O₃ (3×16.00) = 63.02 g/mol.

Now plugging in all our values into the formula:

[tex]\boxed{\boxed{\large\textsf{$\therefore \sf mass = 3.4 \times 63.02=214.3$ g (4 s.f)}}}[/tex]

[tex]\hrulefill[/tex]

https://brainly.com/question/34932079

The statement that is not a step used for the balancing chemical equations is : a. always change subscripts to balance an equation.

The steps used for the balancing  chemical equation is given as :

The equation is said to be balanced when the number of the atom in the product side is equals to the number of the atoms in the products side.

Thus, the incorrect statement is always change subscripts to balance an equation.

To learn more about balancing chemical equation here

https://brainly.com/question/13008546

#SPJ4

The majority of water's life-supporting qualities are explained by its polarity and the hydrogen bonds that connect its molecules.

A molecule is the smallest unit of any substance that is capable of existing on its own while maintaining all of the substance's physical and chemical characteristics. A molecule can be made up of one or more components. Atoms can be separated much further from molecules. For instance, oxygen atoms and molecules are denoted by the letters O and O2, respectively.

To create molecules, atoms combine. Two hydro (H) atoms or one oxygen (O) atom make up a water molecule's three atoms. H2O is a common abbreviation for water because of this. Millions of water molecules make up a single drop of liquid.

To know more about Molecules visit:

https://brainly.com/question/19922822

#SPJ4

To balance the redox reaction in basic solution between cyanide and silver, first write the unbalanced equation containing all the reactants and products of the chemical reaction.

Ag(s) + CN-(aq) + O2(aq) → Ag(CN)2- + OH-(aq)

Subsequently, the redox reaction is divided into partial reactions, that is, the oxidation and reduction reactions are indicated, determining the oxidation numbers of each atom that appears in the reaction.

Ag0 + C+2N-3- + O02 → Ag+1(C+2N-3)2- + O-2H+1-

The redox pairs of all atoms that have been oxidized and all atoms that have been reduced are then identified.

Subsequently, the redox couples combine in two partial reactions: one oxidation and one reduction.

Then the atoms in the partial equations are balanced by adding the appropriate coefficient in front of the formula.

Ag0 + 2CN- → Ag+1(C+2N-3)2- + e-

Next, the number of electrons lost and received is equalized, we will multiply the two equations by the factor that will give the least common multiplier.

Add the partial equations so that on one side are all the products and on the other are all the reactants.

4Ag0 + O02 + 8CN- + 4e- + 4H2O → 4Ag+1(C+2N-3)2- + 2H+12O-2 + 4e- + 4OH-

The equation is reduced by dividing by the greatest common divisor so that the coefficients are the minimum possible.

4Ag0 + O02 + 8CN- + 2H2O → 4Ag+1(C+2N-3)2- + 4OH-

Finally, the balance of charges and elements is verified.

Learn more about the redox reaction at https://brainly.com/question/13293425

#SPJ4