select the number of moles of co2 formed by the reaction of 0.153 mol c3h8 with excess (non-limiting) o2.

The statement "Temperature rise of a furnace is the temperature difference between the air entering the furnace and leaving the furnace" is true.

The temperature rise of a furnace is defined as the difference in temperature between the air entering the furnace and the air leaving the furnace. This temperature rise is a key parameter in determining the performance of a furnace. It reflects the amount of heat that is being transferred from the furnace to the air passing through it.

In HVAC (heating, ventilation, and air conditioning) systems, the temperature rise is used to measure the efficiency of a furnace. A higher temperature rise indicates that more heat is being transferred to the air, which means that the furnace is operating more efficiently.

Thus, the temperature rise is an important parameter in designing, operating, and maintaining furnaces and HVAC systems, and it is essential for ensuring optimal performance and energy efficiency.

To know more about the HVAC systems refer here :

https://brainly.com/question/28235245#

#SPJ11

An aqueous solution of ammonium hypochlorite is a soluble salt. Ammonium hypochlorite is an ionic compound formed by the reaction between ammonium and hypochlorite ions.

When this salt dissolves in water, it dissociates into ammonium and hypochlorite ions, both of which are highly soluble in water. Therefore, the resulting solution is also soluble and can conduct electricity.

Ammonium hypochlorite is a weak acid salt. This means that the resulting solution will be slightly basic. The ammonium ion can undergo hydrolysis in water, producing ammonium hydroxide and hydrogen ions. The hydrogen ions combine with the hypochlorite ions to form hypochlorous acid, which is a weak acid. This reaction results in a slight increase in the pH of the solution, making it basic.

Therefore, an aqueous solution of ammonium hypochlorite is a soluble salt, and the resulting solution is slightly basic.

To know more about hypochlorite please visit...

brainly.com/question/27548463

#SPJ11

Enthalpy change of atomization is always endothermic, as it requires energy to break chemical bonds and separate atoms into individual gaseous atoms.

When a substance is atomized, its chemical bonds are broken and its constituent atoms are separated into individual gaseous atoms. This process requires energy, as the bonds between the atoms must be broken. Therefore, the enthalpy change of atomization is always endothermic, meaning it absorbs heat from the surroundings. The magnitude of the enthalpy change of atomization depends on the strength of the chemical bonds within the substance, as stronger bonds require more energy to break. This property is important in understanding the reactivity and stability of substances, as well as in the design and optimization of chemical reactions.

learn more about enthalpy change here:

https://brainly.com/question/29556033

#SPJ11

The pair of reactants is responsible of the formation of the azo salt in the diazotization of an aromatic primary amine is NaNO₂ and HCl, option D.

Diazotization is the name given to the chemical reaction that transforms a primary aromatic amine into its equivalent diazonium salt. The first person to record such a reaction was the German industrial scientist Peter Griess in 1858. He continued to find several other diazonium salt-based reactions. These diazonium salts are often made by reacting an aromatic amine with nitrous acid in the presence of another acid. Below is a description of a diazotization reaction.

As a result, the necessary nitrosonium ion is created. The aromatic ring that the NH₂ group is now connected to reacts with this. As a result of the formation of a new nitrogen-nitrogen bond, the positive charge of the nitrosonium ion is now transferred to the nitrogen that is directly bonded to the aromatic ring. The n-nitrosamine is produced by the following deprotonation.

Learn more about Diazotization:

https://brainly.com/question/9654525

#SPJ4

To answer this question, we need to use the concept of vapor pressure and the Clausius-Clapeyron equation. At 50°C, the vapor pressure of water is 12.3 kPa. When the water is introduced into the evacuated flask, it will start to evaporate until the pressure of the water vapor reaches 12.3 kPa, at which point the system will reach equilibrium.

Using the ideal gas law, we can calculate the number of moles of water vapor present in the flask when equilibrium is reached:

PV = nRT

where P is the vapor pressure of water (12.3 kPa), V is the volume of the flask (5.00 L), n is the number of moles of water vapor, R is the gas constant (8.31 J/mol*K), and T is the temperature in Kelvin (50°C + 273.15 = 323.15 K).

Solving for n, we get:

n = PV/RT
 = (12.3 kPa * 5.00 L) / (8.31 J/mol*K * 323.15 K)
 = 0.0211 mol

Since the total mass of water in the flask is 1.00 g, we can use the molar mass of water (18.02 g/mol) to calculate the mass of water vapor present:

mass of water vapor = n * molar mass of water
                         = 0.0211 mol * 18.02 g/mol
                         = 0.380 g

Therefore, the mass of water present as liquid when equilibrium is reached is:
mass of water liquid = total mass of water - mass of water vapor
                          = 1.00 g - 0.380 g
                          = 0.620 g

So 0.620 g of water is present as liquid when equilibrium is established.
When 1.00 g of water is introduced into a 5.00 L evacuated flask at 50°C, an equilibrium is established between the liquid water and its vapor. To determine the mass of water present as liquid at equilibrium, you'll need to use the vapor pressure of water at 50°C and the Ideal Gas Law.

At 50°C, the vapor pressure of water is approximately 12.3 kPa. The Ideal Gas Law equation is:

PV = nRT

Where:
P = pressure (in this case, the vapor pressure of water, 12.3 kPa)
V = volume of the flask (5.00 L)
n = moles of water vapor
R = gas constant (8.314 J/mol·K for SI units, but we will use 8.2057×10⁻³ L·kPa/mol·K to match the pressure and volume units)
T = temperature in Kelvin (50°C + 273.15 = 323.15 K)

Now, you can solve for n:

n = PV / RT
n = (12.3 kPa)(5.00 L) / (8.2057×10⁻³ L·kPa/mol·K)(323.15 K)
n ≈ 0.0235 mol

To find the mass of water vapor, multiply moles by the molar mass of water (18.015 g/mol):

mass_water_vapor = n × molar_mass
mass_water_vapor = 0.0235 mol × 18.015 g/mol
mass_water_vapor ≈ 0.423 g

Since 1.00 g of water was initially introduced, the mass of water present as liquid at equilibrium can be found by subtracting the mass of water vapor:

mass_water_liquid = initial_mass - mass_water_vapor
mass_water_liquid = 1.00 g - 0.423 g
mass_water_liquid ≈ 0.577 g

Therefore, at equilibrium, approximately 0.577 g of water is present as liquid in the flask.

To know more about ideal gas law visit:

https://brainly.com/question/28837405

#SPJ11

The hydrolysis constant of a base is a measure of how much it undergoes hydrolysis in water. In the case of NaNO2, it is the salt of a weak acid (HNO2) and a strong base (NaOH), which means that it undergoes hydrolysis in water to some extent. The answer is (b) 2.2 × 10−11.

The hydrolysis reaction of NaNO2 can be represented as follows:
NaNO2 + H2O ↔ NaOH + HNO2
Since HNO2 is a weak acid, its hydrolysis constant (Ka) is known to be 4.5 × 10−4. The hydrolysis of NaNO2 produces HNO2, which means that the hydrolysis constant of NaNO2 (Kb) can be calculated using the relationship:
Kw = Ka x Kb
Where Kw is the ion product constant of water, which is equal to 1.0 × 10−14 at 25°C.
Rearranging the equation, we get:
Kb = Kw/Ka = 1.0 × 10−14/4.5 × 10−4 = 2.2 × 10−11

To know more about hydrolysis

https://brainly.com/question/4352413

#SPJ11

The term "dry cell" best fits the description of a low-moisture primary battery typically made of zinc and carbon.

A dry cell is a type of electrochemical cell that uses a paste electrolyte instead of a liquid electrolyte, which eliminates the need for a liquid-tight seal.

The zinc-carbon dry cell is the most common type of dry cell, and it is widely used in portable electronic devices such as flashlights, radios, and calculators.

The dry cell has a longer shelf life than other types of batteries because the electrolyte paste is less prone to leaking or drying out.

In contrast, secondary batteries consist of multiple cells that can be recharged, and a redox reaction that takes place directly between two solids, rather than in solution, is called a solid-state reaction.

To know more about electrochemical cell, refer here:

https://brainly.com/question/12034258#

#SPJ11

a) The process of gasoline burning in a car is exothermic. This is because the combustion of gasoline releases energy in the form of heat and light.

b) The process of isopropyl alcohol evaporating from the skin is endothermic. This is because the evaporation of a liquid requires energy to break the intermolecular bonds between the molecules, and this energy is absorbed from the surroundings.

c) The process of water condensing as dew during the night is exothermic. This is because when water vapor in the air comes into contact with a cooler surface, such as a blade of grass, it releases energy in the form of heat, causing the water vapor to condense into liquid water droplets.

To learn more about Exothermic click here

https://brainly.com/question/4768494

#SPJ11

The percent ionization of a weak acid, HA, is defined as the ratio of the equilibrium H₃O⁺ concentration to the initial HA concentration, multiplied by 100%.

It is a degree of the power of an acid is its percentage ionization. The percentage ionization of a susceptible acid is the ratio of the awareness of the ionized acid to the preliminary acid awareness, instances 100. Strong acids (bases) ionize absolutely so their percentage ionization is 100%. The percentage ionization for a susceptible acid (base) desires to be calculated. It may be extra intuitive whilst considering way to consider the percentage ionized as opposed to the concentrations or the equilibrium constant.

To learn more about percentage ionization check the link below-

https://brainly.com/question/14919550

#SPJ4

Law of Conservation of Energy: Amount of Heat Consumed in a Reaction is Equal to Amount of Heat Lost by Solution.

What is the relationship between the amount of heat consumed in a chemical reaction and the amount of heat lost by the solution?

The total amount of energy in a closed system remains constant, according to the rule of conservation of energy. In the case of a chemical reaction, this means that the total energy of the reactants must be equal to the total energy of the products. Heat is a form of energy, and it can either be consumed or lost during a chemical reaction.

Therefore, the amount of heat consumed by a reaction must be equal to the amount of heat lost by the solution, as long as the system is closed and no external energy is added or removed. This principle is known as the first law of thermodynamics and is essential for understanding energy transformations in chemical reactions.

To learn more about Law of Conservation of Energy, visit: https://brainly.com/question/24772394

#SPJ4

The H-bonding of water results in the molecule's capacity to be an effective cooling agent weak associations between the partially positive and partially negative ends of the molecules.

A coolant is a material that is normally liquid and is used to lower or regulate a system's temperature. High thermal capacity, low viscosity, low cost, non-toxic, chemically inert, and neither causes nor encourages cooling system corrosion are characteristics of the perfect coolant. The coolant must also be an electrical insulator for some applications.

In industrial processing, heat-transfer fluid is a technical word that is more frequently used in high temperature as well as low temperature manufacturing applications, despite the fact that the phrase "coolant" is regularly used in automotive and HVAC applications. Cutting fluids are also included by the phrase. Water-soluble coolant and plain cutting fluid are two general categories for industrial cutting fluid. Oil in water emulsion serves as a water-soluble coolant. Its oil content ranges from zero to variable amounts (synthetic coolant).

This coolant has two options: it may either maintain its phase, remaining liquid or gaseous, or it can go through a phase change, increasing the cooling efficiency. The second is more often referred to as refrigerant when it is utilised to attain temperatures below ambient.

Learn more about Cooling agent:

https://brainly.com/question/29629075

#SPJ4

The solubility product constant (Ksp) for Mg(OH)₂ is 5.61 x 10⁻¹². This means that the product of the molar concentrations of the ions that make up the compound must be equal to.

Solubility is a physical property of a substance, which determines its ability to dissolve and form a solution with another substance. It is the maximum concentration of a solute in a solution at a given temperature, pressure and solvent.

In this case, the molar concentration of Mg²⁺ ions is 0.10 M, so the product of the molar concentrations should be equal to or less than 0.10 x 5.61 x 10⁻¹² = 5.61 x 10⁻¹³.
The molar concentration of OH⁻ ions can be calculated by taking the square root of the Ksp value and dividing by the molar concentration of Mg²⁺ ions: √(5.61 x 10⁻¹²) / 0.10 = 5.11 x 10⁻⁷
Therefore, the pH at which Mg(OH)₂ begins to precipitate from a solution containing 0.10 M Mg²⁺ ions is the negative log of the molar concentration of OH⁻ ions, or -log(5.11 x 10⁻⁷), which is 6.30.

To learn more about solubility

https://brainly.com/question/23946616

#SPJ4

The pressure of the sample of the gas occupy the 8.06 L if it occupies the 3.84 L at 4.06 atm is 1.93 atm.

The relation between the pressure and the volume is as :

P₁ V₁ = P₂ V₂

Where,

The initial pressure of the gas, P₁ = ?

The final pressure of the gas, P₂ = 4.06 atm

The initial volume of the gas, V₁ = 8.06 L

The final volume of the gas, V₂ = 3.84 L

P₁ = ( P₂ V₂ ) / V₁

P₁ = ( 4.06 × 3.84 ) / 8.06

P₁ = 1.93 atm

The initial pressure of the gas is the 1.93 atm with the initial volume of the gas 8.06 L. The final pressure is 4.06 atm.

To learn more about pressure here

https://brainly.com/question/31295049

#SPJ1

This means that 238UF6 diffuses slightly slower than 235UF6, with a ratio of 0.976.

The ratio of the rates of diffusion of 238UF6 to 235UF6 can be calculated using Graham's law of diffusion, which states that the rate of diffusion of a gas is inversely proportional to the square root of its molar mass.

Rate of diffusion of 238UF6/Rate of diffusion of 235UF6 = Square root of (molar mass of 235UF6/molar mass of 238UF6)

Rate of diffusion of 238UF6/Rate of diffusion of 235UF6 = Square root of (235.0439/238.0508)

Rate of diffusion of 238UF6/Rate of diffusion of 235UF6 = 0.976

This means that 238UF6 diffuses slightly slower than 235UF6, with a ratio of 0.976. This difference in diffusion rates can be used to separate the isotopes using a diffusion-based process.

To know more about Graham's law of diffusion, refer here:

https://brainly.com/question/24553716#

#SPJ11

If pure NO2 gas was placed in a syringe with a moveable piston, the plunger would be expected to move inwards towards the gas. This is because the gas particles in the syringe would be under pressure, due to the presence of other gas particles in the confined space.

As the plunger is pushed in, the volume of the gas particles would decrease, resulting in an increase in pressure. This increase in pressure would push the moveable piston inwards, as it tries to compensate for the reduction in volume.

The plunger of the syringe acts as a barrier between the NO2 gas and the external environment. As the plunger is pushed in, the volume of the gas particles decreases, resulting in an increase in pressure. This increase in pressure causes the moveable piston to move inwards, which is a response to the increased force exerted on it by the gas particles. Thus, the movement of the plunger is a result of the gas particles exerting pressure on the moveable piston, as the volume of the gas is reduced.
When pure NO2(g) is placed in a syringe with a movable piston and the plunger is pushed in, you can expect the gas to become compressed. This happens because the plunger reduces the volume available for the gas particles, causing them to occupy a smaller space. As a result, the pressure within the syringe will increase due to more frequent collisions between gas particles and the syringe walls. This is based on the principles of Boyle's Law, which states that the pressure and volume of a gas are inversely proportional when the temperature and the amount of gas are constant.

For more information on Boyle's Law visit:

brainly.com/question/1437490

#SPJ11

The lattice energy of an ionic compound is inversely proportional to the size of the ions and directly proportional to the charges of the ions. As the charge of the cation increase s, the lattice energy becomes more negative (exothermic) due to increased electrostatic attraction between the ions. As the size of the cation increases, the lattice energy becomes less negative (endothermic) due to decreased electrostatic attraction between the ions.

Explanation:

Lattice energy is the energy released when an ionic solid is formed from its gaseous ions. It depends on the charges and sizes of the ions involved. The lattice energy is directly proportional to the charges of the ions because higher charges lead to stronger electrostatic attraction between the ions, resulting in a more stable ionic compound. For example, the lattice energy of MgO is greater than that of NaCl because Mg2+ has a higher charge than Na+.

On the other hand, lattice energy is inversely proportional to the size of the ions involved. Larger ions have weaker electrostatic attraction between them due to increased distance, leading to a less stable ionic compound. For example, the lattice energy of LiF is greater than that of KBr because Li+ and F- are smaller than K+ and Br-.

In summary, the lattice energy of an ionic compound is influenced by both the charge and size of the ions involved. Higher charges lead to more negative (exothermic) lattice energies, while larger sizes lead to less negative (endothermic) lattice energies.

Learn more about ions  here:

https://brainly.com/question/14982375

#SPJ11

With the production of Jacopo Peri's mostly forgotten Dafne in Florence in 1598, opera began in Italy at the end of the 16th century.

Particularly from Claudio Monteverdi's L'Orfeo and quickly spread throughout Europe: Jean-Baptiste Lully in France, Henry Purcell in England, and Heinrich Schütz in Germany

The first nation where opera gained popularity was Italy. Claudio Monteverdi and Jacopo Peri called it home. This exciting form of entertainment eventually spread throughout the remainder of Europe. Italy, France, and Germany are the primary producers of opera.

Learn more about Producer:

brainly.com/question/29391287

#SPJ4

Amount of reactant in moles is 0.000693 mol.

Amount of sodium borohydride in moles is 0.000556 mol.

Product obtained in moles is 0.000693 mol.

Product theoretical yield is  0.000693 mol.

Product percent yield is 59.1%.

We can use the given masses of benzil and sodium borohydride to calculate the amount of each reactant in moles. Then, we can use the stoichiometry of the reaction to determine the theoretical yield of the product in moles.

Finally, we can calculate the percent yield of the product using the actual yield (given as 0.144 g) and the theoretical yield.

The balanced chemical equation for the reaction is:

[tex]C_14H_{10}O_2 + 4 H_3BCN - C_14H_12O_2 + 4 B(OH)^3 + 2 H_2[/tex]

From the molecular formula of benzil [tex](C_{14}H_{10}O_2)[/tex], we can calculate its molar mass:

Molar mass of benzil = 2(12.01 g/mol) + 10(1.01 g/mol) + 2(16.00 g/mol)

                                   = 212.24 g/mol

Amount of benzil in moles = 0.147 g / 212.24 g/mol

                                           = 0.000693 mol

From the molecular formula of sodium borohydride [tex](NaBH_4)[/tex], we can calculate its molar mass:

Molar mass of [tex]NaBH_4[/tex] = 22.99 g/mol + 4(1.01 g/mol) + 4(1.01 g/mol)

                                     = 37.83 g/mol

Amount of sodium borohydride in moles = 0.021 g / 37.83 g/mol

                                                                    = 0.000556 mol

According to the balanced chemical equation, the reaction produces one mole of product (benzoin) for every one mole of benzil reacted. Therefore, the theoretical yield of benzoin in moles is equal to the amount of benzil used in moles:

Product obtained in moles = 0.000693 mol

Product theoretical yield = 0.000693 mol

Product percent yield = (actual yield / theoretical yield) x 100%

Product percent yield = (0.144 g  / (0.000693 mol x 212.24 g/mol)) x 100%                                                                                    

                                    ≈ 59.1%

The melting point of the product (132-134°C) falls within the expected range for benzoin, so the product is likely pure.

Learn more about Sodium borohydride at

brainly.com/question/31321350

#SPJ4

The key assumption underlying the use of numbers for measuring utility.

What is the fundamental assumption underlying the use of numbers to measure utility?

The key assumption that accompanies the use of numbers for measuring utility is that utility can be quantified and compared between individuals or situations. This assumption is based on the idea that people make rational choices by weighing the costs and benefits of different options, and that these costs and benefits can be expressed numerically.

The use of numbers for measuring utility allows us to make precise comparisons between different alternatives and to identify the option that provides the greatest net benefit. However, it is important to note that this assumption is not universally accepted and some argue that utility cannot be reduced to a single numerical value.

To learn more about numerical value, visit: https://brainly.com/question/30371221

#SPJ4

Based on the complete photoelectron spectra of elements x and y shown below, it can be inferred that element x has a higher atomic number than element y.

This is because the photoelectron spectra of element x show more energy levels and higher binding energies compared to element y. Additionally, element x has more peaks in its spectrum, indicating that it has more electrons and therefore a higher atomic number. Therefore, the best-supported statement comparing elements x and y is that element x has a higher atomic number than element y.

Learn more about photoelectron here,

https://brainly.com/question/1359033

#SPJ11

The mole fraction of gas b is 0.33, the total pressure in kPa is 76 kPa, and the partial pressure of gas c is 17.3 kPa.

To find the mole fraction of gas b, we first need to calculate the total number of moles of all gases present in the mixture. From the diagram, we can see that the total number of moles is 2 + 3 + 4 = 9 moles. To find the mole fraction of gas b, we divide the number of moles of gas b by the total number of moles:

Mole fraction of gas b = Number of moles of gas b / Total number of moles
Mole fraction of gas b = 3 / 9
Mole fraction of gas b = 0.33 (rounded to two decimal places)

To find the total pressure in kPa, we add up the partial pressures of all gases:

Total pressure = Partial pressure of gas a + Partial pressure of gas b + Partial pressure of gas c
Total pressure = 12.4 kPa + 46.3 kPa + 17.3 kPa
Total pressure = 76 kPa

Finally, to find the partial pressure of gas c, we simply look at the diagram and see that it is 17.3 kPa.

Therefore, the mole fraction of gas b is 0.33, the total pressure in kPa is 76 kPa, and the partial pressure of gas c is 17.3 kPa.

Learn more about partial pressure here:

https://brainly.com/question/13199169

#SPJ11

In a student's titration, the correct prediction of NaOH(aq) volume is (B) Iodoacetic acid will need the smallest volume of NaOH(aq) to reach the equivalence point.

Iodoacetic acid is needed because iodoacetic acid is a stronger acid than fluoroacetic and chloroacetic acids due to the presence of the larger iodine atom, which stabilizes the negative charge on the carboxylate ion formed during the titration.

Therefore, iodoacetic acid will require less NaOH(aq) to neutralize all of the acid present, reaching the equivalence point faster than the other haloacetic acids.

Find out more on acids here: https://brainly.com/question/25148363

#SPJ1

Answer:

All of the acids will need the same volume of NaOH(aq) to reach the equivalence point.

Explanation:

The equivalence point of a weak acid-strong base titration is reached when only the conjugate base of the weak acid remains. Since all the weak acids use the same reaction equation, they would all use the same amount of NaOH to react with all the present weak acids.

The distillation flask should be filled no more than two-thirds full to prevent boiling liquid from splattering and potentially causing injury.

This also ensures that there is enough room for vapor to form and travel up the distillation column. A distillation flask, also known as a boiling flask, is a type of laboratory glassware used for separating and purifying mixtures of liquids by heating and vaporizing the components with different boiling points. It is typically made of heat-resistant borosilicate glass and has a round bottom to allow for efficient heating and mixing of the liquid.

The flask is usually attached to a condenser and a receiver flask to collect the purified liquid. The volume of the distillation flask can vary depending on the amount of liquid being distilled, but it should not be filled more than two-thirds full to prevent splattering and ensure efficient vapor formation.

To know more about distillation flask, please click on:

https://brainly.com/question/15187318

#SPJ11

According to the question the reaction quotient (Qc) is 0.099 in scientific notation.

The reaction quotient, often referred to as Q, is a mathematical expression used to calculate the equilibrium concentrations of reactants and products in a chemical reaction. It is obtained by substituting the actual concentrations of reactants and products into the equilibrium expression for the reaction. The reaction quotient can be used to determine the direction in which the reaction will proceed in order to reach equilibrium. If the reaction quotient is greater than the equilibrium constant (K), the reaction will proceed in the forward direction, and if the reaction quotient is less than the equilibrium constant, the reaction will proceed in the reverse direction.

Qc = exp[(E0 - E) (nF/RT)]
= exp[(0.45 - 0.92) (2 x 96,485/8.314 x 298)]
= exp(-2.3475)
= 0.099
Therefore, the reaction quotient (Qc) is 0.099 in scientific notation.

To learn more about reaction quotient
https://brainly.com/question/12693045
#SPJ4

In this case, H3O+ is not an acid that donates a proton to OH- to form a pair, and OH- is not a base that accepts a proton from H3O+ to form a pair.

All of these are conjugate acid-base pairs. All the pairs listed in options 2), 3), 4), and 5) are conjugate acid-base pairs because they differ only in the presence or absence of a proton (H+). The H3O+/OH- pair is the conjugate acid-base pair that represents the autoionization of water.

To determine which of the following is not a conjugate acid-base pair,   a conjugate acid-base pair is. A conjugate acid-base pair consists of two substances related to each other by the transfer of a proton (H+). The acid donates a proton, while the base accepts it.

Here are the given options:

1) All of these are conjugate acid-base pairs.
2) H3O+/OH-
3) H2SO3/HSO3-
4) C2H3O2-/HC2H3O2
5) NH4+/NH3

Option 2 (H3O+/OH-) is not a conjugate acid-base pair. In a conjugate acid-base pair, the acid must differ from the base by one proton. In this case, H3O+ is not an acid that donates a proton to OH- to form a pair, and OH- is not a base that accepts a proton from H3O+ to form a pair.

Learn more about acid-base pairs

brainly.com/question/13409907

#SPJ11

A tripeptide is a molecule composed of three amino acids linked by peptide bonds.

A molecule is a combination of multiple atoms held together by covalent or ionic bonds. Molecules can range in size from diatomic molecules, consisting of two atoms, to very large molecules such as proteins and polysaccharides, which can contain thousands of atoms. Molecules can be either organic or inorganic, and can exist as solids, liquids, or gases. Molecules are essential components of all living organisms, and are also found in many non-living substances.

The number of tripeptides that can be created from the amino acids glutamine, threonine, and histidine is 6. This is because each amino acid can be linked to the other two in any order, resulting in 3! (3 factorial) or 6 possible tripeptides. The possible tripeptides are Gln-Thr-His, Gln-His-Thr, Thr-Gln-His, Thr-His-Gln, His-Gln-Thr, and His-Thr-Gln.

To learn more about molecule
https://brainly.com/question/30375112
#SPJ4

In order to classify a compound as an Arrhenius acid or base, we need to consider its behavior in aqueous solutions. An Arrhenius acid is a compound that donates a hydrogen ion (H+) in water, while an Arrhenius base is a compound that donates a hydroxide ion (OH-) in water.

If a compound does not exhibit these behaviors in water, it is classified as "neither" an Arrhenius acid nor base.

For example:
- Hydrochloric acid (HCl) donates H+ ions in water, making it an Arrhenius acid.
- Sodium hydroxide (NaOH) donates OH- ions in water, making it an Arrhenius base.
- Carbon dioxide (CO2) does not donate H+ or OH- ions in water, so it is neither an Arrhenius acid nor base.

To know more Arrhenius base visit:

https://brainly.com/question/9936252

#SPJ11

The answer is (d) MgC2O4. This is because the solubility of a salt depends on its lattice energy and the energy required to dissociate the salt into its ions.

In the case of MgC2O4, it has a high lattice energy due to the presence of a divalent cation (Mg2+) and a polyatomic anion (C2O4 2-), which makes it difficult for the water molecules to overcome the strong electrostatic forces and separate the ions. As a result, MgC2O4 is insoluble in water.

On the other hand, the other compounds listed are soluble in water. Mn(NO3)2, K2SO4, and Ca(C2H3O2)2 are soluble in water because they are ionic compounds that dissociate into their respective ions in water.

To know more about lattice energy , click here:-

https://brainly.com/question/31730061

#SPJ11

The correct answer is d. 2-methyl-2-hexanol.

The Grignard Reaction occurs when an organomagnesium halide (Grignard reagent) is added to a ketone or aldehyde to generate a tertiary or secondary alcohol. A primary alcohol is formed as a result of the reaction with formaldehyde.

The Grignard reaction of n-butylmagnesium bromide with acetone would produce 2-methyl-2-hexanol.

The reaction mechanism involves the formation of a carbon-carbon bond between the carbonyl carbon of acetone and the alkyl magnesium bromide to form a tertiary alcohol. The Grignard reagent adds to the carbonyl group of acetone, followed by protonation of the alkoxide intermediate to yield the alcohol.

The reaction can be represented as follows:

CH₃COCH₃ + CH₃(CH₂)₃MgBr → CH₃(CH₂)₃CH(OH)CH(CH₃)₂ + MgBrOAc

The product formed has a branched chain with a methyl group on the second carbon atom and a butyl group on the fourth carbon atom, which corresponds to 2-methyl-2-hexanol. Therefore, the correct answer is d. 2-methyl-2-hexanol.

Learn more about grignard reaction on:

https://brainly.com/question/30624804

#SPJ4