A Bronsted-Lowry acid is any species that may transfer a proton (H+) to another molecule. Any species that may take a proton from a different molecule is referred to as a Bronsted-Lowry base. Proton acceptors (PA) are Bronsted-Lowry bases, and proton donors (PD) are Bronsted-Lowry acids.
The connection it establishes between acids and bases is a crucial aspect of the Bronsted theory. There is a conjugate base for every Bronsted acid, and the opposite is true. A measure of an acid's strength is its Ka magnitude, while a measure of a base's strength is its conjugate base's Kb value.
The net-ionic equations of the following species which act as a Bronsted- Lowry acid are given as:
A. [tex]H_{3}O^{+} _{(aq)}[/tex] ⇄ [tex]H^{+} _{(aq)} + H_{2} O_{(l)}[/tex]
B. [tex]HCl_{(l)}[/tex] ⇄ [tex]H^{+} _{(aq)} + Cl^{-} _{(aq)}[/tex]
C. [tex]NH_{3(aq)}[/tex] ⇄ [tex]H^{+}_{(aq)} + NH_{2} ^{-}[/tex]
D. [tex]CH_{3}COOH_{(aq)}[/tex] ⇄ [tex]H^{+} _{(aq)} + CH_{3}COO^{-}[/tex]
E. [tex]NH_{4(aq)} ^{+}[/tex] ⇄ [tex]H^{+}_{(aq)} + NH_{3} _{(aq)}[/tex]
F. [tex]HSO_{4(aq)} ^{-}[/tex] ⇄ [tex]H^{+} _{(aq)} + SO_{4}^{2-} _{(aq)}[/tex]
Learn more about Bronsted- Lowry acid:
https://brainly.com/question/16036170
#SPJ4
How do boimler and rutherford convince the ferengis not to poach mugatos?.
Boimler and Rutherford convince the Ferengis not to poach Mugatos by appealing to their sense of profit and offering a more lucrative alternative.
Step 1: Boimler and Rutherford engage in a conversation with the Ferengis and learn about their motivation for poaching Mugatos, which is primarily financial gain.
Step 2: They research and analyze the potential profit of poaching Mugatos and the potential consequences or risks associated with it, such as legal penalties or environmental damage.
Step 3: Boimler and Rutherford propose a more profitable and sustainable alternative for the Ferengis to consider, such as breeding and conserving Mugatos for a wildlife sanctuary or ecotourism business.
Step 4: They present their proposal to the Ferengis, outlining the financial benefits, reduced risks, and long-term sustainability of their alternative plan.
Step 5: The Ferengis, driven by their desire for profit, agree to abandon their poaching activities and pursue the more lucrative option proposed by Boimler and Rutherford.
Boimler and Rutherford manage to convince the Ferengis not to poach Mugatos by understanding their motivation for profit and presenting a more profitable and sustainable alternative. This solution not only protects the Mugatos but also benefits the Ferengis in the long run, showing that a collaborative approach can lead to a win-win situation for all parties involved.
To know more about Rutherford visit:
brainly.com/question/7151882
#SPJ11
gold-198 has a half-life of 2.7 days. how much of a 263.1 mg gold-198 sample will remain after 13.5 days?
After 13.5 days, 7.03125 mg of the 263.1 mg gold-198 sample will remain.
Gold-198 has a half-life of 2.7 days, which means that every 2.7 days, half of the amount of gold-198 present will decay.
To solve this problem, we can use the formula for radioactive decay:
N = N₀ * (1/2)^(t/h)
Where:
N = final amount
N₀ = initial amount
t = time elapsed
h = half-life
Plugging in the given values:
N₀ = 263.1 mg
t = 13.5 days
h = 2.7 days
N = 263.1 * (1/2)^(13.5/2.7)
N = 263.1 * (1/2)^5
N = 263.1 * 0.03125
N = 8.221875
Therefore, after 13.5 days, approximately 8.22 mg of the gold-198 sample will remain. However, the question asks for how much will remain, which means we need to round to the nearest hundredth.
Rounding to the nearest hundredth gives us:
7.03125 mg
So, after 13.5 days, 7.03125 mg of the 263.1 mg gold-198 sample will remain.
To know more about half-life visit:
https://brainly.com/question/24710827
#SPJ11
Consider a drop of water that is put into a flask, sealed with a cap and heated until the droplet vaporizes. Is the mass of the container and water different after heating.
No, the mass of the container and water is not different after heating. This is because of the Law of Conservation of Mass, which states that matter cannot be created or destroyed, only converted from one form to another.
When the water droplet is heated and vaporized, its molecules become gaseous and spread out evenly throughout the flask, but the total mass of the water molecules remains the same. Therefore, the total mass of the system (the container and the water) before and after heating should be equal.
It is important to note that during the heating process, there may be some loss of mass due to evaporation or other factors, such as the escape of gas molecules through a small leak in the container. However, if the container is properly sealed and the heating process is controlled, the mass of the container and water should remain the same before and after heating.
To know more about Law of Conservation,
https://brainly.com/question/3164144
#SPJ11
What is the ph of a 0. 025 m solution of hydrobromic acid, hbr? ka = 1. 00 x 109 what is the ph of the solution if we double the concentration of hydrobromic acid, hbr? ka = 1. 00 x 109 36
The pH of HBr is 3.30. if we double the concentration of hydrobromic acid, the pH is 2.15
Molarity of hydrobromic acid = 0. 025 M
ka = [tex]1. 00 * 10^{9}[/tex]
The pH of HBr can be calculated using the dissociation constant, Ka:
Ka = [H+][Br-]/[HBr]
Ka = [tex][H+]^2[/tex] / [HBr]
[tex][H+]^2[/tex] = Ka*[HBr]
[H+] =[tex]\sqrt{(Ka*[HBr])}[/tex]
[H+] = [tex]\sqrt{1.00*10^9 * 0.025}[/tex]
[H+] = 5000
pH = [tex]-log_{H+}[/tex]
pH = [tex]-log_{5000}[/tex]
pH = 3.30
Therefore, the pH of HBr is 3.30.
If we double the concentration of HBr to 0.050 M, the new concentration of Hydrogen ions will be:
[H+] = [tex]\sqrt{(Ka*[HBr])}[/tex]
[H+] =[tex]\sqrt{ (1.00*10^9 * 0.050)}[/tex]
[H+] = 7071
pH = -log[H+]
pH = [tex]-log_{7071}[/tex]
pH = 2.15
Therefore, we can conclude that the pH of the solution, if we double the concentration is 2.15.
To learn more about the pH of Hydrobromic acid
https://brainly.com/question/14123720
#SPJ4
When spotting the TLC plate, it is best to keep the spots small and concentrated.True / False
True. When spotting the TLC plate, it is best to keep the spots small and concentrated. This is because large and diffuse spots may lead to inaccurate results and poor resolution. In TLC, the separation of compounds is based on their different affinities for the stationary and mobile phases.
When a large, diffuse spot is applied to the plate, it may result in overlapping of the compounds, making it difficult to distinguish between them.
Additionally, a large spot may take longer to develop, which can lead to prolonged exposure to the developing solvent and possible degradation of the compounds.
Therefore, it is important to apply small, concentrated spots to the TLC plate to ensure optimal separation and accurate results. This can be achieved by using a fine pipette or micro-syringe to apply the sample.
To know more about TLC plate please visit...
brainly.com/question/30925141
#SPJ11
State the number of electrons, protons, and neutrons (in order) for N.
Nitrogen has 7 electrons, 7 protons, and 7 neutrons in its most common isotope.
What are the number of electrons, protons, and neutrons in nitrogen?
Nitrogen (N) is a chemical element with an atomic number of 7, which means it has 7 protons in its nucleus. Since nitrogen is a neutral element, it also has 7 electrons orbiting around the nucleus, balancing out the positive charge of the protons. The most common isotope of nitrogen has 7 neutrons in its nucleus, giving it a mass number of 14 (since the mass number is equal to the sum of protons and neutrons in the nucleus).
However, there are other isotopes of nitrogen that can have different numbers of neutrons. The presence or absence of neutrons in an atom's nucleus can affect its stability and reactivity, making isotopes important in various scientific and industrial applications.
To learn more about isotope, visit: https://brainly.com/question/14220416
#SPJ4
2 Ethyl-1-hexanol is needed for the synthesis of the sunscreen octyl p-methylcinnamate. It can be synthesized by aldol condensation, with the following mechanism 1. Deprotonation of butanal to yield enolate 1: 2. Reaction of enolate I with butanal to yield addition 2: 3. Protonation of addition to yield intermediate 3: 4. Dehydration of intermediate 3 to yield condensation 4 5. Catalytic hydrogenation of condensation 4 to yield the final product. Write out the mechanism on a separate sheet of paper and then draw the structure of addition 2 • You do not have to consider stereochemistry • Draw enolate anions in their carbation form • Do not include counter-son, N 1, in your answer • Do not draw organic or inorganic by products
1. Deprotonation of butanal to yield enolate 1: In this step, the hydrogen (H) atom present on the carbon alpha to the carbonyl group in butanal is removed and replaced with a base such as sodium hydride (NaH) or potassium hydroxide (KOH).
What is butanal?Butanal is an organic compound belonging to the aldehyde family of chemicals. It is composed of a single carbon atom bonded to an oxygen atom and two hydrogen atoms, and is most commonly found in its gaseous form.
This results in a conjugate base, known as an enolate anion, which is stabilized by resonance.
2. Reaction of enolate I with butanal to yield addition 2:
In this step, the enolate anion formed in the previous step reacts with butanal to form an adduct. This reaction is an aldol condensation and the product is an α,β-unsaturated aldehyde.
3. Protonation of addition to yield intermediate 3:
In this step, the proton from the α-carbon of the aldehyde is replaced by acid. This results in an intermediate ketone in the form of a tertiary alcohol.
4. Dehydration of intermediate 3 to yield condensation 4:
In this step, the tertiary alcohol is treated with a strong base such as sodium methoxide (NaOMe), which removes the proton from the α-carbon of the ketone and results in an α,β-unsaturated ketone.
5. Catalytic hydrogenation of condensation 4 to yield the final product:
In this step, the α,β-unsaturated ketone is treated with a catalyst such as palladium on charcoal and hydrogen gas. This results in the reduction of the double bond and the formation of the desired product, ethyl-1-hexanol.
The structure of addition 2 is shown below:
To learn more about butanal
https://brainly.com/question/9943463
#SPJ4
Why does H2O have a normal meniscus while Hg has an inverted meniscus?
H₂O have a normal meniscus while Hg has an inverted meniscus because the attraction between mercury molecules is greater than that between a molecule
And the container's walls, mercury forms a convex meniscus. The water molecules are drawn to the molecules in the glass beaker's wall.
A sunken meniscus, which is what you ordinarily will see, happens when the particles of the fluid are drawn to those of the holder. With water and a glass tube, this happens. A curved meniscus happens when the particles have a more grounded fascination with one another than to the holder, similarly as with mercury and glass.
What distinguishes the upper and lower meniscus from one another?The upper meniscus is the reverse U bend on the highest point of the outer layer of a fluid while the lower meniscus is the U bend on the highest point of the fluid's surface. By looking at the liquid's surface, the lower and upper meniscus are typically visible to the eye.
Learn more about Meniscus:
brainly.com/question/10868896
#SPJ4
why do we allow the crystals to form slowly?
In many chemical processes, it is important to allow crystals to form slowly to obtain the desired crystal size and quality. There are several reasons for this:
Purity: Slow crystal formation allows for the removal of impurities that may be present in the solution. As the crystals form, the impurities are often excluded from the crystal lattice, resulting in a purer product.
Crystal size and shape: By controlling the rate of crystal formation, it is possible to influence the size and shape of the crystals. Slow crystallization generally results in larger crystals with well-defined shapes, which can be important for certain applications such as in the pharmaceutical industry.
Yield: Slow crystal formation can also improve the yield of the final product. By allowing the crystals to form slowly, more of the product can be extracted from the solution, resulting in a higher yield.
Safety: Rapid crystal formation can result in the buildup of pressure, which can be dangerous in certain situations. Allowing the crystals to form slowly can help to prevent this.
Overall, allowing crystals to form slowly can help to produce a higher quality and more pure product, while also increasing yield and improving safety.
To know more about crystallization
brainly.com/question/14252791
#SPJ11
What are the straight-chain structural isomers of C6H12?
There are five straight-chain structural isomers of C6H12: hexane, 2-methyl pentane, 3-methyl pentane, 2,2-dimethylbutane, and 2,3-dimethylbutane.
These isomers have the same molecular formula (C6H12) but different arrangements of atoms in their structures. Structural isomers are molecules with the same molecular formula but different arrangements of atoms. In other words, they have the same number and types of atoms, but the atoms are bonded together in different ways. This results in differences in the physical and chemical properties of the isomers, such as boiling points, melting points, and reactivity. There are three types of structural isomers: chain isomers, position isomers, and functional group isomers. Chain isomers have the same functional group but differ in the arrangement of the carbon chain. Position isomers have the same functional group and carbon chain but differ in the position of the functional group on the chain. Functional group isomers have different functional groups, but the same molecular formula. For example, butane and 2-methylpropane are chain isomers because they have the same formula (C4H10) but different arrangements of the carbon chain. Ethanol and dimethyl ether are functional group isomers because they have the same formula (C2H6O) but different functional groups (alcohol vs ether). Finally, 1-chlorobutanol and 2-chloroquine are position isomers because they have the same formula (C4H9Cl) and the same functional group (alkyl halide), but the chlorine atom is in a different position on the carbon chain.
Learn more about structural isomers here:
https://brainly.com/question/13422357
#SPJ11
Assuming that you could make the molecule CTe2, select all of the following that are true for that molecule. C is more electronegative than Te
The electron geometry is tetrahedral
The electron geometry is trigonal planar
The electron geometry is linear
The electron geometry is bent
The molecule geometry (shape) is T-shaped
The molecule geometry (shape) is bent (109.5 degrees)
The molecule geometry (shape) is linear
The molecule is polar
The molecule is nonpolar
C would have a partial negative charge
Te would have a partial negative charge
the molecule geometry is bent (120 degrees)
The electron geometry is tetrahedral, The molecule geometry (shape) is bent (109.5 degrees), The molecule is polar, C would have a partial negative charge, Te would have a partial negative charge.
What is tetrahedral ?Tetrahedral is a type of geometry which is based on the shape of a regular tetrahedron. A regular tetrahedron is a four-sided polyhedron which has four equilateral triangles as its faces. This type of geometry is used in many different applications, such as in the construction of buildings, in chemistry, and in mathematics. In chemistry, the tetrahedral shape is used to describe the shape of molecules, as the atoms which make up the molecule are arranged in a tetrahedral shape. In mathematics, the tetrahedral shape is used in various geometric calculations, such as determining the volume of a tetrahedron or calculating the angles between the faces of a tetrahedron. In architecture, the tetrahedral shape is often used to construct strong, stable structures.
To learn more about tetrahedral
https://brainly.com/question/20274710
#SPJ4
How many grams of bircarbonate will produce 40 ml of co2 gas?.
0.109 grams of bicarbonate will produce 40 mL of CO2 gas when reacted with an acid.
The number of grams of bicarbonate that will produce 40 mL of CO2 gas depends on the reaction being considered. The balanced chemical equation for the reaction between bicarbonate (HCO3-) and an acid to produce CO2 gas is:
HCO3- + H+ -> CO2 + H2O
In this reaction, one mole of HCO3- produces one mole of CO2. The volume of one mole of any gas at standard temperature and pressure (STP) is 22.4 liters, or 22,400 mL. Therefore, one mole of CO2 gas occupies 22,400 mL at STP.
To calculate the number of moles of CO2 gas produced by 40 mL of CO2 gas, we can use the following conversion factor:
1 mol CO2 / 22,400 mL CO2 = x mol CO2 / 40 mL CO2
Solving for x, we get:
x = 40 mL CO2 x (1 mol CO2 / 22,400 mL CO2) = 0.00179 mol CO2
Since one mole of HCO3- produces one mole of CO2, we need 0.00179 moles of HCO3- to produce 40 mL of CO2 gas. The molar mass of HCO3- is 61.01 g/mol, so 0.00179 moles of HCO3- is equal to:
0.00179 mol HCO3- x 61.01 g/mol = 0.109 g HCO3-
To learn more about bicarbonate visit:
brainly.com/question/8560563
#SPJ11
Evaluate the (base) hydrolysis constant for sodium cyanate, NaOCN.
a. 3.7 × 10−12
b. 6.4 × 10−9
c. 2.9 × 10−11
d. 4.0 × 10−10
e. 6.8 × 10−10
To determine the base hydrolysis constant for sodium cyanate (NaOCN), we need to understand the hydrolysis process it undergoes in water. Sodium cyanate dissociates into sodium ions (Na+) and cyanate ions (OCN-) when dissolved in water. The correct answer is c. 2.9 × 10^-11
The cyanate ion then reacts with water to form bicarbonate ions (HCO3-) and hydroxide ions (OH-), as shown below: OCN- + H2O → HCO3- + OH-
To evaluate the hydrolysis constant (Kb), we need to consider the ionization constants of the species involved. The ionization constant for cyanate ion (Ka) is given as 3.7 × 10^-4. To find Kb, we use the relationship between Ka, Kb, and Kw (the ion product constant of water, 1.0 × 10^-14 at 25°C): Kw = Ka × Kb
Solving for Kb, we get:
Kb = Kw / Ka
Kb = (1.0 × 10^-14) / (3.7 × 10^-4)
Kb = 2.7 × 10^-11
To know more about hydrolysis
https://brainly.com/question/4352413
#SPJ11
Which statement about greenhouse gases is TRUE?
They only come from human activities.
They trap heat radiated from the Earth.
They are harmless to humans.
They are not needed for life on Earth.
What volume, in milliliters, of distilled water is needed to make an 8. 40 m solution of hcl acid using 180. Grams of hcl?.
To prepare an 8.40 m (molality) solution of HCl using 180 grams of HCl, you need to determine the volume of distilled water required.
First, calculate the moles of HCl:
Moles of HCl = mass (grams) / molar mass of HCl
Moles of HCl = 180 g / (1.007 g/mol + 35.453 g/mol) ≈ 4.90 moles
Next, use the molality formula:
molality = moles of solute / mass of solvent (kg)
Rearrange the formula to find the mass of solvent:
mass of solvent (kg) = moles of solute / molality
mass of solvent (kg) = 4.90 moles / 8.40 m ≈ 0.583 kg
Convert the mass of solvent to milliliters, assuming the density of water is 1 g/mL:
Volume of distilled water (mL) = mass of solvent (kg) × 1000
Volume of distilled water (mL) ≈ 0.583 kg × 1000 ≈ 583 mL
So, you will need approximately 583 mL of distilled water to make an 8.40 m solution of HCl using 180 grams of HCl.
To know more about molality, visit:
https://brainly.com/question/26921570
#SPJ11
"A 100.0 mL sample of 0.10 M NH 3 is titrated with 0.10 M HNO 3. Determine the pH of the solution after the addition of 50.0 mL of HNO 3. The K b of NH 3 is 1.8 × 10^ -5.
7.05
9.26
7.78
10.34
4.74"
pH of a 0.10 M NH3 solution after the addition of 50.0 mL of 0.10 M HNO3 is 9.26.
What is the pH of a 0.10 M NH3 solution after the addition of 50.0 mL of 0.10 M HNO3?
The balanced chemical equation for the reaction of NH3 and HNO3 is as follows:
NH3 + HNO3 → NH4+ + NO3-
Before any HNO3 is added, the solution contains NH3 and its conjugate acid, NH4+. NH3 is a weak base and reacts with water to produce OH- ions. The equilibrium expression:
NH3 + H2O ⇌ NH4+ + OH-
The K b expression for NH3 is:
Kb = [NH4+][OH-] / [NH3]
At the beginning of the titration, the concentration of NH3 is 0.10 M and the concentration of OH- is x (unknown). The concentration of NH4+ is also x because they are both produced in a 1:1 ratio.
Kb = [x][x] / [0.10 - x]
Since the volume of the solution does not change during the titration, we can use the following expression to relate the initial moles of NH3 to the moles of NH3 remaining after the addition of HNO3:
moles NH3 = 0.10 mol/L × 0.100 L = 0.010 mol
At the equivalence point, all of the NH3 has reacted with HNO3 to form NH4+ ions. Therefore, the number of moles of HNO3 added to reach the equivalence point is also 0.010 mol.
Before the equivalence point, the reaction between NH3 and HNO3 consumes one mole of NH3 for every mole of HNO3 added. Therefore, after adding 50.0 mL of 0.10 M HNO3 (which contains 0.0050 mol of HNO3), the number of moles of NH3 remaining is:
0.010 mol - 0.0050 mol = 0.0050 mol
The volume of the solution after adding 50.0 mL of HNO3 is:
V = 100.0 mL + 50.0 mL = 0.150 L
The concentration of NH3 at this point is:
[ NH3 ] = (0.0050 mol) / (0.150 L) = 0.033 M
The concentration of NH4+ is also 0.033 M because they are produced in a 1:1 ratio with NH3.
To calculate the concentration of OH- ions, we can use the Kb expression and solve for [OH-]:
Kb = [NH4+][OH-] / [NH3]
1.8 × 10^-5 = (0.033 M)(x) / (0.033 M)
x = 1.8 × 10^-5
Therefore, the concentration of OH- ions is 1.8 × 10^-5 M.
The pH of the solution can be calculated from the concentration of OH- using the expression:
pH = 14 - pOH
pOH = -log[OH-] = -log(1.8 × 10^-5) = 4.74
pH = 14 - 4.74 = 9.26
Therefore, the pH of the solution after the addition of 50.0 mL of HNO3 is 9.26. The correct answer is B.
To learn more about NH3 solution, visit: https://brainly.com/question/29489884
#SPJ4
"A 25.0-mL sample of 0.150 M hydrazoic acid is titrated with a 0.150 M NaOH solution. What is the pH after 13.3 mL of base is added? The K a of hydrazoic acid is 1.9 × 10^ -5.
4.78
1.34
3.03
4.45
4.66"
According to the question the pH after 13.3 mL of base is added is 4.66.
What is pH?pH is a measure of the acidity or alkalinity of a solution. It is measured on a scale from 0 to 14, with 0 being the most acidic and 14 being the most alkaline. A neutral pH is 7. Solutions with a pH lower than 7 are considered acidic, while solutions with a pH higher than 7 are considered alkaline. pH is important to the environment because it impacts the availability of nutrients to organisms and determines the types of organisms that can live in an area. pH also affects water chemistry, which can have an impact on aquatic life.
In this case, [base] = 0.150 M and [acid] = 0.150 M - (13.3 mL x 0.150 M)/25.0 mL = 0.106 M.
Plugging these values into the equation gives us:
pH = 1.9 x 10⁻⁵ + log(0.150/0.106) = 4.66
Therefore, the pH after 13.3 mL of base is added is 4.66.
To learn more about pH
https://brainly.com/question/172153
#SPJ4
"A 25.0-mL sample of 0.150 M butanoic acid is titrated with a 0.150 M NaOH solution. What is the pH before any base is added? The K a of butanoic acid is 1.5 × 10^ -5.
1.5 × 10-3
1.0 × 104
2.83
4.00
4.82"
The pH of the solution before any base is added is 4.82. The answer is option (E).
What is Solution?
A solution is a homogeneous mixture of two or more substances, in which the components are uniformly distributed on a molecular level. In a solution, the solute is the substance that is dissolved in the solvent, which is the substance in which the solute is dissolved.
At the beginning of the titration, before any base is added, the solution contains only butanoic acid and its conjugate base in equilibrium with each other. Since the solution contains a weak acid, we can assume that the initial concentration of [[tex]H_{3} O^{+}[/tex]] is negligible compared to the initial concentration of butanoic acid. Therefore, we can assume that the [[tex]H_{3} O^{+}[/tex]] initially present in the solution comes only from the ionization of butanoic acid.
Using the expression for Ka, we can solve for [H3O+] as:
Ka = [[tex]CH_{3} CH_{2} CH_{2} OO^{-}[/tex]][[tex]H_{3} O^{+}[/tex]] / [[tex]CH_{3} CH_{2} CH_{2} COOH[/tex]]
[[tex]H_{3} O^{+}[/tex]] = Ka [[tex]CH_{3} CH_{2} CH_{2} COOH[/tex]] / [[tex]CH_{3} CH_{2} CH_{2} OO^{-}[/tex]]
[[tex]H_{3} O^{+}[/tex]] = (1.5 × [tex]10^{-5}[/tex]) (0.150 M) / 0.150 M
[[tex]H_{3} O^{+}[/tex]] = 1.5 × [tex]10^{-5}[/tex] M
The pH of the solution before any base is added can be calculated using the equation:
pH = -log[H3O+]
pH = -log(1.5 × [tex]10^{-5}[/tex])
pH = 4.82
Therefore, the pH of the solution before any base is added is 4.82. The answer is option (E).
Learn more about Solution from the given link
https://brainly.com/question/25326161
#SPJ4
how would you know if your sample contained impurities when taking the melting point?
The presence of impurities in a sample can be detected by observing changes in the melting point of the substance.
When an impure sample is heated, its melting point range becomes broader and its melting point decreases. This is because the impurities disrupt the crystal lattice structure of the substance, making it easier to break apart and melt. In contrast, a pure substance will melt at a sharp and well-defined melting point.
Therefore, if the melting point range of a sample is broad and has a lower melting point than the expected value of the pure substance, it may contain impurities. Additionally, the appearance of a plateau or depression on the melting point curve is also indicative of impurities.
To confirm the presence of impurities, one can perform a mixed melting point test. This involves mixing a small amount of the sample with a known pure compound and taking the melting point of the mixture. If the melting point of the mixture is depressed and has a lower range than that of the pure compound alone, then the sample contains impurities. If the melting point range remains the same and is sharp, then the sample is likely pure.
To learn more about Melting Point click here
https://brainly.com/question/5753603
#SPJ11
What is the hydroxide ion concentration of a solution at 25∘C with a pH=9.90?
The hydronium concentration, [H₃O⁺] = 0.9957 M which is calculated in the below section.
The pH = 9.90
In the autoionization of water, a proton is transferred from one water molecule to another to produce a hydronium ion (H₃O⁺) and a hydroxide ion (OH⁻). The equilibrium expression for this reaction is Kw = [H₃O⁺][OH⁻],
The concentration of hydronium ion and hydroxide ion when a water molecule dissociates is the same which is 1 mol.
The pH can be calculated as follows-
pH = -log [H₃O⁺]
9.90 = log [H₃O⁺]
[H₃O⁺] = 0.9957 M
To learn more about hydronium ion check the link below-
brainly.com/question/27586088
#SPJ4
what alcohols are obtained from the reduction of the following compounds with sodium borohydride?
The reduction of carbonyl compounds, such as ketones and aldehydes, using sodium borohydride (NaBH4) results in the formation of primary and secondary alcohols, respectively.
For example, reduction of propanal with NaBH4 leads to the formation of 1-propanol, while reduction of acetone results in the formation of 2-propanol.
Additionally, NaBH4 can also reduce esters to primary alcohols and acid chlorides to primary alcohols. For instance, the reduction of ethyl acetate with NaBH4 yields ethanol, while the reduction of benzoyl chloride results in the formation of benzyl alcohol.
It is important to note that NaBH4 is a selective reducing agent, meaning it only reduces carbonyl groups and does not reduce other functional groups such as alcohols, nitro groups, or halogens.
Furthermore, the reduction with NaBH4 typically occurs under mild conditions and in the presence of a protic solvent, such as methanol or ethanol. Overall, NaBH4 is a useful reagent for the synthesis of alcohols in organic chemistry.
To know more about aldehydes refer here:
https://brainly.com/question/30665943#
#SPJ11
The technique of paper chromatography is based on the relative solubility of the pigments to the chromatography __ and their affinity or attraction to the chromatography __.
The technique of paper chromatography is based on the relative solubility of the pigments to the chromatography solvent and their affinity or attraction to the chromatography paper.
Paper chromatography is a powerful analytical technique that is used to separate and identify different compounds in a mixture. It involves placing a small sample of the mixture onto a strip of chromatography paper, which is then placed in a container containing a solvent. As the solvent travels up the paper, it carries the various compounds with it.
The separation occurs because the different compounds have different solubilities in the solvent and different affinities for the paper. Compounds that are more soluble in the solvent will travel farther up the paper than those that are less soluble.
Compounds that have a stronger affinity for the paper will tend to stick to the paper and not travel as far. By comparing the relative distances that the different compounds travel up the paper, it is possible to identify the compounds present in the mixture.
Learn more about Paper chromatography
brainly.com/question/8937853
#SPJ11
Group the electronic configurations of neutral elements in sets according to those you would expect to show similar chemical properties.
The electronic configurations of neutral elements can be grouped into sets based on their similar chemical properties. These sets are determined by the number of valence electrons present in the outermost shell of the atom.
The valence electrons are the electrons in the outermost shell of an atom, and they are responsible for determining the chemical properties of an element. Atoms with the same number of valence electrons tend to exhibit similar chemical behavior, as they have the same electron configuration in their outermost shell.
For example, the elements in Group 1 of the periodic table (lithium, sodium, potassium, etc.) all have one valence electron, which makes them highly reactive and likely to form ions with a +1 charge. Similarly, the elements in Group 17 (fluorine, chlorine, bromine, etc.) all have seven valence electrons, which makes them highly reactive and likely to form ions with a -1 charge.
By grouping elements with similar numbers of valence electrons, we can predict their chemical behavior and properties.
To know more about configurations, visit;
https://brainly.com/question/26084288
#SPJ11
explain how using the mass of the anhydrous salt instead of the hydrated salt effects the % water in your sample.
Using the mass of the anhydrous salt instead of the hydrated salt can have a significant effect on the percentage of water in the sample.
When we calculate the percentage of water in a sample, we typically use the mass of the hydrated salt because it includes the mass of the water molecules present in the sample. However, if we use the mass of the anhydrous salt instead, we are essentially ignoring the mass of the water molecules and assuming that they are not present. This can lead to an inaccurate calculation of the percentage of water in the sample.
For example, let's say we have a hydrated salt with a mass of 10 grams, and we want to calculate the percentage of water in the sample. If we assume that the salt is anhydrous and use its mass instead, we might end up with a much lower percentage of water than is actually present in the sample.
In conclusion, it is important to use the mass of the hydrated salt when calculating the percentage of water in a sample, as this will give a more accurate representation of the amount of water present. Using the mass of the anhydrous salt instead can lead to an underestimation of the percentage of water in the sample.
To know more about anhydrous salt, visit:
https://brainly.com/question/31198226
#SPJ11
you will be using the voltage of an electrochemical cell to measure the ksp of copper(ii) carbonate, a solid that is practically insoluble. would you expect the voltage to be positive, negative, or zero? explain your answer.
The voltage of the electrochemical cell for measuring the Ksp of copper(II) carbonate would be positive.
An electrochemical cell consists of two half-cells, one for oxidation and one for reduction.
The overall cell potential (voltage) is calculated by subtracting the oxidation half-cell potential from the reduction half-cell potential. I
n this case, copper(II) carbonate will undergo a reduction process, forming copper and carbonate ions. Since copper(II) carbonate is practically insoluble, its equilibrium will lie far to the left, and the concentration of copper ions in solution will be very low.
This low concentration of copper ions will result in a more positive reduction potential for the copper half-cell, according to the Nernst equation.
Considering the low concentration of copper ions and the resulting positive reduction potential, the overall cell voltage for measuring the Ksp of copper(II) carbonate will be positive.
For more information on electrochemical cell kindly visit to
https://brainly.com/question/31812648
#SPJ11
benedict's test shows the presence of reducing sugars . a positive benedict's test appears as a reddish precipitate . a negative benedict's test appears as a blue solution .
Benedict's test is a chemical test that can be used to check to see if a sample contains reducing sugars. As a result, simple carbohydrates with a free ketone or aldehyde functional group can be identified with this test.
Benedict's reagent, also known as Benedict's solution, is a compound mixture of sodium citrate, sodium carbonate, and the pentahydrate of copper(II) sulphate that serves as the basis for the test. When Benedict's reagent and reducing sugars interact, a brick-red precipitate indicates that the test was successful.
A lessening sugar is changed into an enediol (a respectably powerful decreasing specialist) when warmed within the sight of a soluble base. Benedict's reagent's cupric particles (Cu²⁺) are switched over completely to cuprous particles (Cu⁺) while decreasing sugars are available in the analyte. These cuprous particles join with the response blend to deliver copper(I) oxide, which hastens as a block red substance.
Learn more about Benedict's test:
https://brainly.com/question/27987066
#SPJ4
Complete question:
Benedict's test shows the presence of
Choose...reducing sugars, alcohols, amino acids
A positive Benedict's test appears as
Choose...a reddish precipitate, a blue solution ,a color change to purple
A negative Benedict's test appears as
Choose...a blue solution, a white precipitate, a colorless solution
2..The iodine test shows the presence of
Choose...proteins, sugars, starch
A positive iodine test appears as
Choose...a color change to blue-black, a yellowish precipitate ,a colorless solution
A negative iodine test appears as
Choose...a yellowish solution, a green solution, a white precipitate
Which lists the diameter of the planets in order from smallest to largest?.
The planets listed in order from smallest to largest in terms of diameter are Mercury, Mars, Venus, Earth, Neptune, Uranus, Saturn, and Jupiter.
The diameter of a planet is one of the key characteristics used to classify and compare celestial bodies. In terms of this measurement, Mercury is the smallest planet in our solar system with a diameter of 3,030 miles. It is followed by Mars, which has a diameter of 4,212 miles, and Venus, which measures 7,520 miles. Earth is the fourth smallest planet with a diameter of 7,926 miles.
The larger planets in our solar system include Neptune (30,599 miles), Uranus (31,763 miles), Saturn (75,299 miles), and Jupiter (86,881 miles). Knowing the relative sizes of planets is important for understanding how they interact with each other and their environments, and for making predictions about their behavior and characteristics.
Learn more about planets here:
https://brainly.com/question/15268075
#SPJ11
An aqueous ammonium chloride solution rather than sulfuric acid is used in the hydrolysis of the magnesium complex of 1,1-diphenylethanol to ensure that no acid-catalyzed dehydration occurs. Write the chemical structure of the dehydration product from 1,1-diphenylethanol. (grignard lab)
The dehydration product of 1,1-diphenylethanol is 1,1-diphenylethene, also known as stilbene. The chemical structure of 1,1-diphenylethene is:
H3C-C=C-CH3 where the two phenyl (C6H5) groups are attached to the terminal carbon atoms of the double bond.
What is stilbene?
Stilbene is an organic compound with the chemical formula C14H12. It is a hydrocarbon that consists of a central trans-stilbene unit, which is composed of two phenyl (C6H5) groups attached to each end of a central double bond (C=C). Stilbene is a colorless solid that is soluble in organic solvents like benzene, ether, and chloroform.
In the presence of acid, such as sulfuric acid, 1,1-diphenylethanol can undergo dehydration to form 1,1-diphenylethene by eliminating a molecule of water. However, in the presence of ammonium chloride, which acts as a weak acid, the hydrolysis reaction of the magnesium complex of 1,1-diphenylethanol proceeds without dehydration occurring.
Learn more about stilbene from the given link
https://brainly.com/question/29408048
#SPJ4
Suppose 100 ml of perchloric acid is neutralized by exactly 46. 9 ml of 0. 75 m lithium hydroxide. What is the concentration of the perchloric acid?.
The concentration of the perchloric acid in the solution when neutralized by lithium hydroxide is 0.76 mol/L
Concentration in chemistry is calculated by dividing a constituent's abundance by the mixture's total volume. Mass concentration, molar concentration, number concentration, and volume concentration are four different categories of mathematical description. Any type of chemical mixture can be referred to by the term "concentration," but solutes and solvents in solutions are most frequently mentioned.
There are many types of molar (quantity) concentration, including normal concentration and osmotic concentration. By adding a solvent to a solution, for example, dilution is the lowering of concentration. The opposite of dilution is concentration increase, which is the meaning of the word concentrate.
The most common way to solve this problem is to use the formula
c₁V₁=c₂V₂
In your problem,
c₁ = 4.2 mol/L; V₁ = 45.0 mL
c₂ = ?; V₂ = 250 mL
c₂ = c₁ × V₁V₂ = 4.2 mol/L × 45.0mL250mL = 0.76 mol/L.
Learn more about Concentration:
https://brainly.com/question/26255204
#SPJ4
The reaction of (CH3)3CBr with hydroxide ion proceeds with the formation of (CH3)3COH.(CH3)3CBr (aq) + OH- (aq) → (CH3)3COH (aq) + Br- (aq)The following data were obtained at 55°C.What will the initial rate (in mol/L • s) be in Experiment 4?
In Experiment 4, the concentration of [tex](CH_3)_3CBr[/tex] is 0.30 M and the concentration of hydroxide ion is 0.10 M. We can calculate the initial rate as follows: Initial rate = [tex]k[(CH_3)3CBr]^1[OH-]^1[/tex]
What is hydroxide?Hydroxide is an ion with the chemical formula OH-. It is composed of one oxygen atom and one hydrogen atom, and is the conjugate base of water. Hydroxide is a strong base and is responsible for the alkalinity of solutions. In aqueous solutions, hydroxide is the source of hydronium ions, which are responsible for pH. Hydroxide is also a versatile ligand, forming complexes with a wide range of metal ions. It is found in many natural and synthetic compounds, and is used in many industrial applications.
where k is the rate constant.
Substituting the values, we get
Initial rate = [tex]k(0.30 M)^1(0.10 M)^1[/tex]
Initial rate = k(0.30) (0.10)
Initial rate = 0.03k mol/L · s
Therefore, the initial rate (in mol/L · s) in Experiment 4 is 0.03k mol/L · s.
To learn more about hydroxide
https://brainly.com/question/21393201
#SPJ4
