Soils in a soil hydrologic group will have: a constant infiltration rate constant saturated hydraulic conductivity constant depth to water table the same runoff potential under similar rainstorms and surface conditions

Answers

Answer 1

The same runoff potential under similar rainstorms and surface conditions.

Soils in a soil hydrologic group share similar characteristics related to their water-holding capacity, infiltration rate, and drainage properties. This means that they will have a similar response to rainfall and surface conditions, resulting in the same runoff potential. The factors mentioned in the question, such as infiltration rate, saturated hydraulic conductivity, and depth to water table, may vary within a soil hydrologic group but will still lead to similar runoff potential when other conditions are held constant.

Soils within the same soil hydrologic group exhibit similar runoff potential under similar rainstorms and surface conditions. This means that their ability to absorb and retain water, as well as their drainage properties, contribute to a consistent response to rainfall and surface conditions, resulting in similar runoff characteristics.

To know more about soil hydrologic group, visit

https://brainly.com/question/31780707

#SPJ11


Related Questions

A large dig found a uranium mineral containing the Pb isotopes 204Pb, 206Pb, and 207Pb in the ratio of
2:2000:900. Estimate the age of this mineral.

Answers

A mineral's age can be estimated using the concept of radioactive decay. the estimated age of the uranium mineral containing the Pb isotopes 204Pb, 206Pb, and 207Pb in the ratio of 2:2000:900 is approximately 500 million years.

The uranium decay series starts with the isotope 238U and eventually leads to the formation of lead isotopes. 238U decays into 206Pb through a series of radioactive decays. Therefore, the ratio of 206Pb to 238U can be used to estimate the age of the mineral.

In this question, we are given the ratios of 204Pb, 206Pb, and 207Pb isotopes as 2:2000:900. However, to estimate the age of the mineral, we need the ratio of 206Pb to 238U.

To calculate the ratio of 206Pb to 238U, we need to make some assumptions. Let's assume that the initial ratio of 206Pb to 238U in the mineral was 0. Therefore, the ratio of 206Pb to 238U after the decay would be equal to the given ratio of 206Pb to 204Pb.

Let's calculate the ratio of 206Pb to 238U using the given information:
206Pb / 238U = (206Pb / 204Pb) * (204Pb / 238U)
206Pb / 238U = (2000 / 2) * (2 / 900)
206Pb / 238U = 2000 / 900
206Pb / 238U = 2.22

Now, we can use this ratio to estimate the age of the mineral. The ratio of 206Pb to 238U can be compared to a reference table or graph that shows the relationship between the ratio and age. This table or graph is usually based on experimental data and calibration.

Let's say the reference table shows that a ratio of 2.22 corresponds to an age of 500 million years. Therefore, the estimated age of this mineral would be 500 million years.

It's important to note that the accuracy of this estimation depends on the accuracy of the reference table or graph used. Additionally, this method assumes that the decay rate has remained constant over time, which may not always be the case.

In conclusion, the estimated age of the uranium mineral containing the Pb isotopes 204Pb, 206Pb, and 207Pb in the ratio of 2:2000:900 is approximately 500 million years.

To know more about radioactive decay visit: brainly.com/question/9932896

#SPJ11

in what type of oceans would productivity be highest?

Answers

Ocean productivity is highest in regions with favorable nutrient availability, sunlight, and oceanographic conditions, such as coastal upwelling zones and tropical/subtropical waters. These areas experience high nutrient inputs, ample sunlight for photosynthesis, and beneficial mixing and circulation patterns, leading to thriving marine ecosystems.

Productivity in the oceans is influenced by various factors, including nutrient availability, temperature, sunlight, and oceanographic conditions.

In general, the highest productivity is observed in regions where these factors are favorable for the growth of marine organisms.

One of the key factors determining oceanic productivity is nutrient availability. Nutrients like nitrogen, phosphorus, and iron are essential for the growth of phytoplankton, which form the base of the marine food web.

Areas with high nutrient inputs, such as coastal upwelling zones or regions where ocean currents bring nutrients to the surface, tend to have high productivity.

Another important factor is sunlight. Sunlight is necessary for photosynthesis, the process by which phytoplankton convert carbon dioxide and nutrients into organic matter.

Therefore, regions with ample sunlight, such as tropical and subtropical waters, tend to have high productivity.

Additionally, oceanographic conditions like mixing and circulation patterns can affect productivity. Upwelling zones, where cold, nutrient-rich waters rise to the surface, often support high levels of productivity.

Coastal areas influenced by river runoff can also have elevated productivity due to nutrient inputs from the land.

Overall, regions with a combination of favorable nutrient availability, sunlight, and oceanographic conditions, such as coastal upwelling zones or tropical/subtropical waters, are typically associated with the highest productivity in the oceans.

To know more about productivity refer here:

https://brainly.com/question/28347869#

#SPJ11

PLEASE ANSWER THE QUESTON BELOW WITH MINIMUM 260 WORDS;
Describe how evolution produces species diversity.
Discuss how species interactions shape biological communities.
Explain the dynamic nature of biological communities and some ecosystem services they provide.
Discuss the role of disturbance and resilience in ecosystems.

Answers

Evolution is a fundamental process that contributes to the production of species diversity.

Natural selection, proposed by Charles Darwin, is a major driver of species diversity. It operates by favoring individuals with advantageous traits that increase their chances of survival and reproduction. This process leads to the accumulation of genetic variations within a population, eventually giving rise to new species. Additionally, genetic drift, which refers to random changes in allele frequencies, and gene flow, the transfer of genetic material between populations, can also contribute to species diversity by introducing new genetic variations.

Species interactions play a crucial role in shaping biological communities. These interactions can be classified into various categories, including predation, competition, mutualism, commensalism, and parasitism. Predation, for example, drives the evolution of adaptations for capturing prey and avoiding predators. Competition occurs when individuals or species compete for limited resources, leading to niche differentiation and the development of unique traits. Mutualism involves mutually beneficial interactions between species, while commensalism describes relationships where one species benefits and the other is unaffected. Parasitism involves one species benefiting at the expense of another.

Biological communities are dynamic and constantly changing. They undergo succession, which refers to the process of community development over time. Succession can be primary, starting with bare substrates, or secondary, occurring after disturbances. Ecosystems provide a range of essential services, known as ecosystem services, which include regulating climate, purifying water and air, supporting pollination, and providing habitat for biodiversity. They are vital for human well-being and the functioning of the planet.

Disturbances play a crucial role in shaping ecosystems and can include natural events like fires, storms, or volcanic eruptions, as well as human activities such as logging or urban development. Disturbances can lead to changes in species composition, alter the physical environment, and create opportunities for new species to establish. Ecosystems also possess resilience, which refers to their ability to recover from disturbances and return to a state of equilibrium. Resilience is influenced by factors such as species diversity, functional redundancy, and connectivity between ecosystems.

In conclusion, evolution contributes to species diversity through mechanisms such as natural selection, genetic drift, mutation, and gene flow. Species interactions shape biological communities through predation, competition, mutualism, commensalism, and parasitism. Biological communities are dynamic, providing essential ecosystem services such as climate regulation, water purification, and habitat provision. Disturbances and resilience are integral components of ecosystems, influencing species composition, ecosystem structure, and the ability of ecosystems to recover from disturbances.

Learn more about ecosystem:

https://brainly.com/question/30187156

#SPJ11

the rock cycle shows that rock is transformed after partial melting during metamorphism into

Answers

During metamorphism, rock is transformed through partial melting into magma.

Metamorphism is a geological process that involves the transformation of existing rocks into new types of rocks due to changes in temperature, pressure, and chemical conditions. One of the key mechanisms by which this transformation occurs is partial melting. When rocks are subjected to high temperatures and pressures during metamorphism, certain minerals within the rock may begin to melt while others remain solid. This partial melting creates a mixture of solid and liquid material known as magma.

Magma is a molten rock substance that is less dense than the surrounding solid rocks. It is highly mobile and can migrate through the Earth's crust due to its lower density. As the magma rises through the crust, it can accumulate in magma chambers or ascend to the Earth's surface through volcanic activity. When the magma cools and solidifies, it forms new igneous rocks, such as granite or basalt, depending on its composition and cooling conditions.

The rock cycle illustrates the continuous transformation of rocks between the three main rock types: igneous, sedimentary, and metamorphic. Metamorphic rocks, which are formed through the alteration of pre-existing rocks under high temperatures and pressures, can undergo partial melting during the metamorphic process. This transformation into magma represents a critical stage in the rock cycle, as it allows for the formation of new igneous rocks through the solidification of the molten material.

Learn more about metamorphism

brainly.com/question/32914798

#SPJ11

An important difference between confined and unconfined aquifers is that
a. the saturated zone can rise and fall only in confined aquifers
b. the saturated zone can rise and fall only in unconfined aquifers
c. wells can be created only in confined aquifers
d. wells can be created only in unconfined aquifers

Answers

The correct answer is a. The saturated zone can rise and fall only in confined aquifers.


Confined aquifers are bounded by impermeable layers above and below, which create pressure that keeps the water in the aquifer under confinement. This means that the water level in the saturated zone of a confined aquifer can rise and fall as the pressure changes.

On the other hand, unconfined aquifers do not have impermeable layers above them, allowing the water level in the saturated zone to freely rise and fall based on natural processes such as precipitation and groundwater recharge.

Therefore, the main difference between confined and unconfined aquifers is that the saturated zone can rise and fall only in confined aquifers.

To know more about Water visit .

https://brainly.com/question/28465561

#SPJ11

Which of the following best describes "urban morphology"? the high population density in cities the two dimensional nature of cities the three dimensional structure of the buildings in a city the lack of large bodies of water QUESTION 2 10 points How does the National Weather Service define a heat wave? two or more days in a row of daytime temperatures of at least 105 degrees and nighttime low temperature of at least 80 degrees one 24-hour period of daytime temperatures of at least 105 degrees and nighttime low temperautre of at least 80 degrees two days in a row of daytime temperatures of at least 100 degrees and nighttime low temperature of at least 90 degrees two or more days in a row of daytime temperatures of at least 95 degrees and nighttime low temperature of at least 80 degrees
Previous question
N

Answers

Urban morphology" refers to the three-dimensional structure of buildings in a city.

It encompasses the physical layout, design, and arrangement of urban spaces, including the arrangement of streets, buildings, parks, and other urban features. It focuses on the form and organization of urban areas and how they shape the overall character and function of a city.

The National Weather Service defines a heat wave as "two or more days in a row of daytime temperatures of at least 95 degrees Fahrenheit (35 degrees Celsius) and nighttime low temperatures of at least 75 degrees Fahrenheit (24 degrees Celsius)."

To know more about   Urban morphology   here

https://brainly.com/question/28341148

#SPJ4

The inhabitants of Quito have been known to proclaim that their city has one of the best climates in the world. These advocates claim that it is "always spring in Quito" Can you suggest what the physical basis of this claim might be?

Answers

The physical basis for the claim that it is "always spring in Quito" lies in the city's location near the equator, high elevation, and surrounding topography.

Equatorial Location: Quito is situated near the equator, which means it experiences relatively consistent sunlight throughout the year. This results in more balanced temperatures and fewer extreme seasonal variations compared to regions farther from the equator.

High Elevation: Quito is located at an elevation of around 2,850 meters (9,350 feet) above sea level. Higher elevations generally have cooler temperatures due to the decrease in atmospheric pressure and the associated drop in temperature with altitude. As a result, Quito enjoys mild and comfortable temperatures throughout the year.

Topography: The city of Quito is surrounded by mountains, including the Pichincha volcano. The surrounding topography contributes to the city's microclimate by providing a natural barrier to weather systems, influencing cloud formation, precipitation patterns, and wind circulation. This can create a more stable and pleasant climate.

The combination of Quito's equatorial location, high elevation, and surrounding topography contributes to its mild and spring-like climate. The city experiences relatively stable temperatures with average highs ranging from 18°C to 24°C (64°F to 75°F) year-round, providing residents with a comfortable and enjoyable climate.

The physical basis for the claim that it is "always spring in Quito" stems from the city's equatorial location, high elevation, and the influence of surrounding topography. These factors contribute to a mild and pleasant climate with relatively consistent temperatures throughout the year, resembling the characteristics of spring.

To know more about Quito, visit

https://brainly.com/question/14191869

#SPJ11

which of the following statements best describes globular clusters?

Answers

Globular clusters contain from hundreds of thousands to millions of stars and have a typical size of about 50 parsecs.

Globular Clusters:

Globular clusters are dense, spherical collections of stars that orbit around the galactic core. They are typically found in the outer regions of galaxies, including our Milky Way. These clusters contain thousands to millions of stars that are gravitationally bound together.

The stars in globular clusters are generally very old and have a similar age and composition, indicating that they formed together from the same molecular cloud.

Due to their tightly packed nature, globular clusters have a characteristic spherical shape and exhibit a high concentration of stars toward their centers. They are considered some of the oldest objects in the universe and provide valuable insights into the early stages of galaxy formation and stellar evolution.

Know more about Globular Clusters here:

https://brainly.com/question/29944733

#SPJ4

The given question is incomplete. Hence, the complete question is:

"Which of the following statements best describes globular clusters?

Its temperature, luminosity, and radius remain essentially constant for the next 10 billion years.An onion-like set of layers forms, with the heaviest elements in the innermost shells surrounded by progressively lighter ones.They typically contain a few hundred stars and are a few parsecs across.They contain from hundreds of thousands to millions of stars and have a typical size of about 50 parsecs."

the point on earth's surface where an earthquake occurred. is called

Answers

The point on earth's surface where an earthquake occurs is called the epicenter.

Hence, the correct answer is epicenter.

The epicenter is the location directly above the focus or hypocenter, which is the actual point within the Earth where the earthquake originates. When an earthquake occurs, seismic waves radiate outward from the hypocenter, and the epicenter is the point on the surface that is directly above this origin.

Determining the location of the epicenter is crucial in earthquake monitoring and reporting. By analyzing the arrival times of seismic waves at different seismograph stations, scientists can triangulate the epicenter's position. This information helps in assessing the earthquake's magnitude, depth, and potential impact on surrounding areas.

Learn more about epicenter here:

https://brainly.com/question/28136716

#SPJ4

the principle that tells geologists the landscape formed before the lava flow formed, as shown in the illustration, is called

Answers

The principle that geologists use to determine what the landscape looked like before the lava flow formed is known as superposition.

Superposition states that in an undisturbed sequence of sedimentary rocks, each layer is deposited on top of older rocks. This principle acknowledges the oldest rocks at the bottom of the sequence and the youngest rocks at the top. So, in the illustration, looking at the layers of rock above the lava flow, geologists can infer that whatever landscape was present before the lava flow formed was eventually covered by it.

This helps give geologists a better understanding of the Earth’s history and changes that have occurred over time. Additionally, superposition is useful for determining tectonic activity or tectonic boundaries. By comparing the composition and age of rocks on either side, geologists can make very detailed conclusions about the land’s history.

To know more about Superposition , click here:

https://brainly.com/question/12493909

#SPJ4

KJMS 241715Z AUTO 19023G32KT 2SM TSRA BR BNK040 BNK060

OVC110 19/18 A3003 RMK AO2 PK WND 19032/1714 LTG DSNT SW-NW P004

Station _______ Date ______ Time ________

Sky condition ______________________________________________________

Current weather ____________________________________________________

Hourly precipitation _________" Visibility _________ statute miles

Peak wind direction ____________ deg Peak wind time __________

A)AUTO / 17/ 19023 / cloudy, broken clouds, overcast / TSRA tossing raindrops / 0.40" / 20SM / 190 / 1714z

B)KJMS / 24 / 1715z / cloudy, broken clouds, overcast / TSRA thunderstorm BR mist / 0.04" / 2SM / 190 / 1714z

Answers

A) The station is KJMS.

  The date is 24.

  The time is 1715z.

B) The station is KJMS.

  The date is 24.

  The time is 1715z.

The given information provides details about the weather conditions at station KJMS. The sky condition is described as cloudy with broken clouds and overcast at an altitude of 11000 feet. The current weather includes thunderstorms with rain, mist, and tossing raindrops. The hourly precipitation is 0.04 inches, and the visibility is 2 statute miles. The peak wind direction is 190 degrees, and the peak wind time is 1714z.

The weather report indicates a significant weather event with thunderstorms and reduced visibility at station KJMS. The given information helps understand the current weather conditions and their impact on visibility and precipitation at the specified time.

To know more about weather conditions click here:

https://brainly.com/question/28166791

#SPJ11

the jovian planets have retained most of their atmospheres because

Answers

The jovian planets have retained most of their atmospheres because of their high gravitational pull and large mass.

The majority of the atmospheres on the jovian planets, which include Jupiter, Saturn, Uranus, and Neptune have been preserved for a variety of reasons. First of all they can retain a sizable amount of gas due to their large mass and powerful gravitational pull. The atmosphere can't escape into space because of gravitational force. The jovian planets have lower temperatures because they are farther from the Sun than the terrestrial planets are.

Gas molecules move more slowly in colder temperatures which makes it more difficult for them to reach escape velocity. In addition, lighter gases like hydrogen and helium which are less likely to escape than heavier molecules, are abundant in the composition of the Jovian planets. The jovian planets ability to preserve their atmospheres is a result of these factors working together.

Learn more about Jovian planets at:

brainly.com/question/32848859

#SPJ4

The use of color to draw the map-reader's eye to the most important information on a map is an example of a. rasterization b. animation c. visual hierarchy

Answers

Visual hierarchy is an important concept when creating a map. It involves using color, size, and other design techniques to draw the reader’s attention to the most important information.

Correct option is c. visual hierarchy.

For instance, colors can be used to separate sections of a map or highlight important features such as roads, national parks, or bodies of water. Additionally, size can be used to make a more prominent element stand out more.

For instance, a map might have many cities, but the capital city might be represented by a larger dot to draw the eye. By employing visual hierarchy, cartographers can make even complex maps easier and more intuitive to read.

know more about techniques here

https://brainly.com/question/31591173#

#SPJ11

Both midlatitude cyclones and hurricanes (or typhoons) in the Northern Hemisphere experience winds that spiral outward from a center of low pressure. True or false

Answers

Both mid-latitude cyclones and hurricanes (or typhoons) in the Northern Hemisphere experience winds that spiral outward from a center of low pressure. Hence, the statement is true. However, there are some differences between these two types of storms.

Midlatitude cyclones, also known as extratropical cyclones, are large-scale weather systems that occur in the middle latitudes, typically between 30° and 60°. They are formed due to the interaction between warm and cold air masses. These cyclones are characterized by a well-defined center of low pressure and have a frontal structure, with warm and cold fronts extending outward from the center. The winds in midlatitude cyclones circulate counterclockwise in the Northern Hemisphere, spiraling outward from the low-pressure center. These storms are responsible for much of the day-to-day weather we experience, including rain, snow, and strong winds.

On the other hand, hurricanes (or typhoons) are tropical cyclones that form over warm ocean waters near the equator. These storms are characterized by a more symmetrical structure and a distinct eye at the center. Hurricanes are fueled by the heat and moisture from the warm ocean surface, and they rotate counterclockwise in the Northern Hemisphere. The winds in hurricanes are much stronger than those in midlatitude cyclones, reaching speeds of over 74 mph (119 km/h). They can cause widespread destruction, including heavy rainfall, storm surges, and strong winds.

In summary, both midlatitude cyclones and hurricanes in the Northern Hemisphere have winds that spiral outward from a center of low pressure, but they differ in terms of location, size, structure, and intensity.

To know more about hurricanes visit: brainly.com/question/18221136

#SPJ11

Living and dead particles of organic matter are collectively called: major constituents minor constituents or trace elements dissolved organic matter particulate organic matter

Answers

Living and dead particles of organic matter are collectively called particulate organic matter (POM).

POM refers to the solid or semi-solid organic material found in ecosystems, including living organisms and their remains. These particles can come from various sources, such as plants, animals, and microorganisms.

Some examples of POM include leaves, branches, animal carcasses, feces, and dead microorganisms. These particles can be of different sizes, ranging from large debris to microscopic particles.

POM plays a crucial role in ecosystems as it serves as a source of energy and nutrients for various organisms. When POM decomposes, it releases organic compounds, such as sugars, proteins, and lipids, which can be used by other organisms for growth and metabolism. Additionally, POM can also provide physical structures and habitats for different organisms, such as shelter and protection.

In summary, living and dead particles of organic matter are collectively called particulate organic matter (POM). POM is an essential component of ecosystems, providing energy, nutrients, and physical structures for organisms.

To know more about organic matter visit: brainly.com/question/4618039

#SPJ11

machu picchu has survived through what type of natural disaster?

Answers

Machu Picchu has faced the threat of earthquakes, landslides, and flooding, its robust construction techniques, strategic positioning, and relative isolation have contributed to its survival through various types of natural disasters over the centuries.

Machu Picchu, the ancient Inca citadel located in the Andes Mountains of Peru, has endured various natural disasters throughout its existence. Despite being situated in a region prone to geological and meteorological events, Machu Picchu has remarkably withstood the test of time and survived several types of natural calamities.

One of the significant threats to Machu Picchu is seismic activity.

The region experiences frequent earthquakes due to its location along the tectonic plate boundaries.

Over the centuries, numerous earthquakes have shaken the area, but Machu Picchu's solid construction and strategic placement on a ridge have helped it withstand these tremors.

Another potential hazard is landslides, which can be triggered by heavy rainfall, slope instability, or seismic activity.

The steep terrain surrounding Machu Picchu makes it susceptible to such events.

The Inca engineers employed sophisticated terracing and drainage systems, which have helped mitigate the risk of landslides and minimize their impact on the site.

Additionally, the region encounters intense rainfall and occasional flooding, particularly during the wet season.

The Vilcanota-Urubamba River flows nearby, and although it has the potential to cause floods, the elevated location of Machu Picchu provides some protection against inundation.

It is worth noting that Machu Picchu's remote and hidden location in the mountains played a significant role in its preservation.

The site remained relatively unknown to the outside world until its rediscovery in 1911, which helped protect it from potential human-induced damages and natural disasters.

For similar questions on natural disasters

https://brainly.com/question/13800641

#SPJ8

Other Questions
Hii have tried this question a few tim but it keep telling me thatthere is no output come out . Please helpJump to level 1 Write an if-else statement for the following: If user_tickets is equal to 8 , execute award_points \( =1 \). Else, execute award_points = user_tickets. Ex: If user_tickets is 3 , then oligopolistic behavior implies that oligopolists prefer competition ______. multiple select question. a) through product development. b) through advertising. c) through pricing over collusion. d) through cartels. a specific learning disorder in reading is most likely to manifest in fluency.T/F What event had the immediate effect of causing Germany to declare war on the allies Write an equation for a line that contains point P and isparallel to the given line.1. Y = 5x + 1; P (1,3)2. -x + 3y = 6; P (-3,5)3 .Y = 1/2x: P (4,0)4. 5x + 3y = 9; P(7,-6) corporate governance revolves around the relationship between which two parties? Personal Finance Which of the following will give the borrower an advantage on interest payments? Find the minimum value of f(x,y)=68x^2+23y^2 subject to the constraint x^2+y^2= 400________ what is the definition of environmental and economy as a concernwithin the supply chain? [The following information applies to the questions displayed below.] Clearview Window Company manufactures windows for the home-building industry. The window frames are produced in the Frame Division. The frames are then transferred to the Glass Division, where the glass and hardware are installed. The company's best-selling product is a three-by-four-foot, doublepaned operable window. The Frame Division also can sell frames directly to custom home builders, who install the glass and hardware. The sales price for a frame is $190. The Glass Division sells its finished windows for $430. The markets for both frames and finished windows exhibit perfect competition. The standard variable cost of the window is detailed as follows: *Not including the transfer price for the frame. Assume that there is no excess capacity in the Frame Division. Required: 1-a. Use the general rule to compute the transfer price for window frames. 1-b. Calculate the transfer price if it is based on standard variable cost with a 10 percent markup. The indoor temperature is 65F; the outdoor temperature is 48F. Find the thermal transmittance of a building wall, which has a total area of 20,000 ., when the heat loss is 115,600 Btu/hr. (5 Question 4: 15 marks 4.1 Consider a buck converter with the following circuit parameters: V = 20 V, Vo = 15 V, and Io = 5A, for f = 50 kHz. Design the values of the capacitor, the inductor and the load resistance for an output ripple voltage (AV) of 1% of V, and an inductor ripple current (AI) of 10% of the load current. (15) You are tasked with creating a Flower class for a graphics editing program so that users can select the flower they want to use in their picture from a menu of options. Which of the following would be an appropriate attribute for that context?Select one:a. Genderb. Petal colorc. Speciesd. Genus research has shown that adolescents tend to apply formal logic: 1. On January 1, 2019 Denny's Burgers sold a 20 year Bond issue of $1,500,000. The Bonds were issued at a sale price of 95 . The Bonds require semiannual interest payments on July 1 and January 1 at a stated rate of 8%. Required: a. Journalize the issuance of the bonds on January 1, 2019. b. Journalize the interest payment of July 1 , 2019 and any amortization of discount or premium. c. Journalize the accrual of interest on December 31,2019 and any amortization of discount or premium. d. Journalize the payment of interest on January 1, 2020. Submit your journal to instructor an organization can try to make its workplace safer by For the single-phase circuit with an inductive load, (resistor and inductor), the angle between the supply voltage and supply current c ranges from 0 to 180 d. ranges from 0 to 90 Fall 2016 Time allowed: 30 minutes ------ Name: 2- How long does it take to go from zero voltage to next zero voltage on a 50 Hz power line? a. 5 ms b. 2.5 ms C20 ms d. 10 ms 3- Is the active power supplied to a motor affected by placing of capacitors parallel with the motor? a. yes at all operating conditions b. yes if the motor is working at rated condition Cyes if the capacitors are connected in delta d. no Program and Course/Topic: BSCS CompilerConstructionWhat are the four important ways of code optimizationtechniques used in compiler? Explain each with the help of anexample. Alternative dispute resolution is favored in international disputes because of questions surrounding:(all that apply)-awards-jurisdiction-timing How do you measure the output of a thermocouple?