State the Ld50 for the insecticide carbonsulfan again C. quinquefasciatus

State the LD50 for the insecticide permethrin against C. quinquefasciatus

Which insecticide is the most effect? Explain why

Study the does response curves above for chemicals A and B. How would you describe the difference between the two?

State The Ld50 For The Insecticide Carbonsulfan Again C. QuinquefasciatusState The LD50 For The Insecticide

Answers

Answer 1

Permethrin is moreeffective than carbonsulfan against Culex quinquefasciatus, and chemical   A is more effective at lower doses than chemical B.

How is this so?

Carbonsulfan has an LD50 of 0.012 mg/kg against   Culex quinquefasciatus, while permethrin has an LD50 of 0.002 mg/kg.

This means that permethrin is more potent,as it takes a lower dose to kill 50% of the mosquitoes compared to carbonsulfan.

When comparing the dose-response curves   of chemicals A and B,it is evident that chemical A is more effective at lower doses, but at higher doses, chemical B surpasses its effectiveness

This difference may be attributed to the potential for resistance development with chemical A.

Learn more about Insecticide at:

https://brainly.com/question/6589507

#SPJ1

State The Ld50 For The Insecticide Carbonsulfan Again C. QuinquefasciatusState The LD50 For The Insecticide

Related Questions

Before turning left, the right-of-way should be
given to oncoming cars:
Until most cars have passed
That are more than 500 ft away
Unless they are turning right
Until it is safe to turn

Answers

Answer:

The correct option is:

Until it is safe to turn.

Explanation:

Before turning left, the right-of-way should be given to oncoming cars, but this doesn't necessarily mean waiting for all cars to pass or specifically considering the distance of the cars. The primary consideration should be ensuring it is safe to turn without impeding or causing a collision with oncoming traffic. It is important to assess the speed and distance of oncoming cars, along with any other factors such as intersections, traffic signals, or road conditions, to determine when it is safe to make the left turn.

Before turning left, the right-of-way should be E. Until it is safe to turn.

How to explain the safety

Before turning left, the right-of-way should be given to oncoming cars, but this doesn't necessarily mean waiting for all cars to pass or specifically considering the distance of the cars.

The primary consideration should be ensuring it is safe to turn without impeding or causing a collision with oncoming traffic. It is important to assess the speed and distance of oncoming cars, along with any other factors such as intersections, traffic signals, or road conditions, to determine when it is safe to make the left turn.

The correct option is E

Leaen more about safety

https://brainly.com/question/29618609

#SPJ1

Dual enrollment courses offer:

A Credit for two high school classes

B Weighted college credits

C Weighted high school credits

D both high school and college credits

Answers

Answer:

D) Both high school and college credits.

Explanation:

Dual enrollment courses are designed to provide students with the opportunity to earn credits that count toward both their high school graduation requirements and college degree requirements. By successfully completing a dual enrollment course, students typically earn credits that apply to their high school transcript and can also be transferred to a college or university. This allows students to get a head start on their college education while still in high school. Therefore, dual enrollment courses offer both high school and college credits.

D.both high school and college credits

Urgent Help Please!?! Statisticians prefer large samples. Describe briefly the effect of increasing the size of a sample (or the number of subjects in an experiment) on each of the following:


a) The width of a level C confidence interval.

b) The P-value of a test, when H sub 0 is false and all facts about the population remain unchanged as n increases.

A simple explanation is fine

Answers

a) Increasing the size of the sample generally results in a narrower confidence interval. This means that as the sample size increases, the estimate of the population parameter becomes more precise, and we can be more confident that the true population parameter lies within our estimated confidence interval.

b) The P-value of a test is the probability that the observed result (or more extreme) could have occurred by chance alone, assuming the null hypothesis is true. As the sample size increases, this probability decreases, because with a larger sample size, we have more statistical power to detect a difference between the sample mean and the population mean, if such a difference exists. Therefore, as the sample size increases, the P-value of a test decreases, making it less likely that the observed result occurred by chance alone.

Some insects have become resistant to various types of pesticides. Suggest a way that this resistance and future development of resistance might be reduced. Explain your claim.

Answers

Reducing resistance and preventing the future development of resistance in insects can be achieved through integrated pest management (IPM) strategies.

IPM is an eco-friendly and sustainable approach that combines multiple tactics to control pests, including insects, while minimizing the reliance on pesticides.

Firstly, crop rotation can be implemented to disrupt the life cycles of pests and reduce their population. By alternating crops, pests that rely on specific plants for survival are deprived of their food source, thus reducing their numbers.

Additionally, this practice promotes a healthier soil ecosystem, which can naturally suppress pests.

Secondly, biological control methods can be employed, such as introducing natural predators or parasites that feed on the target pests. This helps maintain a balanced ecosystem and provides long-term control without the need for chemical intervention.

Furthermore, cultural practices like maintaining good hygiene, removing crop residues, and practicing proper sanitation can discourage the buildup of pest populations.

By eliminating favorable conditions for pests, their survival and reproduction can be limited.

Lastly, the judicious use of pesticides is essential. Instead of relying solely on a single type of pesticide, a rotation of different chemical classes can be employed to reduce the likelihood of resistance development.

Targeted application techniques and monitoring systems can help ensure that pesticides are used only when necessary and in the most effective manner.

By implementing these IPM strategies, we can minimize the selective pressure on insects, thus reducing resistance development and prolonging the efficacy of pesticides.

This integrated approach promotes sustainable pest management while minimizing negative impacts on the environment and human health.

For more such questions on resistance,click on

https://brainly.com/question/17142188

#SPJ8

Other Questions
True or False?The option for a blended sentence may be given to juveniles who have received a direct file, mandatory or a prosecutorial waiver, to the adult court. A solid rectangular box with height 4 m and square base with side lengths 4 m is built using a lightweight material whose density is 400 Constructing this box requires work against gravity. Recall that the gravitational constant is g = 9.85- The required work is 250880 J (include units in your answer). (If you are unable to figure this problem out, you will receive a hint after 3 tries) Hint: ****** kg m (1 point) A solid cylinder with height 6 m and base with radius 1.5 m is built using a lightweight material whose density is 400 Constructing this cylinder requires work against gravity. Recall that the gravitational constant is g = 9.8m. The required work is (include units in your answer and write "pi" (without quotes] to enter ). (If you are unable to figure this problem out, you will receive a hint after 3 tries) kg m Why the water saturation of shale layer is 0. Which of the following is not commonly found in a stack frame? (a) return address (b) static variables (c) saved registers parameters (d) [1 marks] 11. Why is tail recursion so important in functional languages? [2 marks] 12. Why do functional languages make such heavy use of lists? [4 marks] 13. List the three defining characteristics of object-oriented programming. [3 marks] 14. What additional features do objects have over modules as types? [3 marks] 15. What is the connection among template instantiation in C++, type inference in ML, and program execution in Prolog? [3 marks] 16. Which language is most commonly used to write server-side scripts embedded in web pages (i.e., executed by an interpreter the web server, rather than via CGI)? [2 marks] 17. Which of the following is not a distinguishing characteristic of scripting languages? (a) dynamic scoping (b) pattern matching (c) high-level data types (d) easy interaction with/access to other programs [1 mark] 18. What are the pros and cons of declarative languages over imperative languages? [4 marks] 19. What is the scope of a variable in Prolog? A triangle has ankle \( A=39= \), angle \( C=123^{-} \), and side \( a=10 \) meters. Find side \( c \) to the nearest tenth of a meter. a) \( 7.5 \) b) \( 13.3 \) c) \( 5.3 \) d) \( 31.5 \) Evaluate the following integral. \[ \int_{1}^{2} 2^{-\theta} d \theta \] \[ \int_{1}^{2} 2^{-\theta} d \theta= \] Alberta Inc. (AI) pays an annual dividend of $1.9 per share. If AI's stock is currently trading at $25.89 per share, and AI's expected growth rate is 5%, what is AI's expected return? ROUND YOUR ANSWER TO AT LEAST TWO DECIMAL PLACES WITHOUT ANY SIGNS: I.E. 9.65% WILL BE ENTERED AS 9.65 Find the true sentence. A.) Not every nondeterministic pushdown automaton has an equivalent determin- istic pushdown automaton, but every nondeterministic finite automaton has an equiv- alent deterministic finite automaton. B.) Not every nondeterministic pushdown automaton has an equivalent determin- istic pushdown automaton, and not every nondeterministic finite automaton has an equivalent deterministic finite automaton. C.) Every nondeterministic pushdown automaton has an equivalent deterministic pushdown automaton, and every nondeterministic finite automaton has an equivalent deterministic finite automaton. D.) Every nondeterministic pushdown automaton has an equivalent deterministic pushdown automaton, but not every nondeterministic finite automaton has an equiva- lent deterministic finite automaton. Question 3 (25 Marks)Elaborate on the systems theory and highlight why it is suitable in explaining the characteristic of the management environment. Determine the maximum horizontal and vertical velocity at adepth of 2.0m for a wave with the following characteristics: wavePeriod is 9s and wave height is 3m. The water depth at the site is5m.Not Suppose that:c=a+b2abcos()Solve the equation above forc, given that=140,a=17,b=12, andc>0. CalcPad symbol drawer or type deg. For example,sin(30deg).c= Using beta and gamma functions, prove that C Vsin 8 de x de Vsin 8 = IT Need help with this one Suppose you sample one value from a uniform distribution with a = 0 and b= 10. a. What is the probability that the value will be between 7 and 9? b. What is the probability that the value will be between 1 and 4? c. What is the mean? d. What is the standard deviation? a. The probability that the value will be between 7 and 9 is (Type an integer or a decimal.) b. The probability that the value will be between 1 and 4 is (Type an integer or a decimal.) c. The mean of the given uniform distribution is u (Type an integer or a decimal.) d. The standard deviation of the given uniform distribution is a (Round to four decimal places as needed.) scientific notation of 5,810 +2,3 10 Write the required ASM program as under:1)Define a integer array and its elements (integers) without any duplicates.2)Define the integer to be searched(X) and a variable FOUND to indicate finding of required data.3)Loop through the array to determine if X is in the array.4)If X is found, the FOUND should be set , the index should be set to location of X and the rest of array need not be searched. If X is not found FOUND should be reset, and the index should be set to one greater than elements in the array.Note: program should be in 62 bit assembly languageeg: ecx, eax, edx etc. Find two solutions of the equation. Give your answers in degrees (0 0 360) and radians (0 s Doctor Jones and Doctor Garcia recently decided that the practice needs a modern information system to support its business and health information management needs. The new system would replace a mix of paper-based and legacy systems. Dr. Jones asked you to design an information system that could support the clinics current operations and future growth. In your first meeting, Dr. Jones provided an overview of the clinics business processes and staff members. He told you that Anita Davenport, who has been with New Century since its inception, is the office manager. She supervises the support staff of seven people. Fred Brown handles human resources and employee benefits. Corinne Summers reports directly to Fred and works with payroll, tax reporting, and profit distribution among the associates. Susan Gifford is responsible for the maintenance of patient medical records. Tom Capaletti handles accounts receivables and Tammy Alipio is the insurance billing specialist. Lisa Sung is responsible for managing appointments. Her duties include reminder calls to patients and preparing daily appointment lists. Carla Herrera is concerned primarily with ordering and organizing office and medical supplies. After studying this information, you start to prepare for your next meeting with Dr. Jones.Tasks:1. Use the background information to create a business profile for New Century, and indicate areas where more information will be needed. The profile should include an organization chart of the office staff. You can create the chart using Microsoft Word or a similar program, or you can draw it by hand. In Word 2010, click the Insert tab on the Ribbon, then Smart Art, then Organization Chart.2. Identify six business processes that New Century performs, and explain who has primary responsibility for each process. Also describe what data is required and what information is generated by each process.3. Based on what you know at this point, is it likely that you will recommend a transaction processing system, a business support system, or a user productivity system? What about an ERP system? Explain your reasons.4. Describe the systems development method you plan to use, and explain the pros and cons of using this method. In a high-pressure, high-temperature chemical reaction, which thermodynamic primitive will reach its minimum value at the equilbirium state?EnthalpyEntropyHelmholtz free energyGibbs free energy it takes 56 minutes for 7 printing machine to produce a batch of newspapers. how many minutes would it take 1 machine