Answer:
complementary colour
Explanation:
The complementary colors are used for the light that is transmitted when complex ions absorb wavelength of visible light.
What is complementary colors?
Complementary colors are color pairs that cancel each other whenever combined and mixed, resulting in a grayscale color either white or black. They offer the most contrast for the those two hues when put adjacent to each other. Colors that are complementary are sometimes known as "opposite colors."
What is light?Light, often known as visible light, is electromagnetic radiation that falls within the region of the electromagnetic spectrum which the human eye can perceive.
Therefore, the complementary colors are used for the light that is transmitted when complex ions absorb wavelength of visible light.
To know more about complementary colors and light
https://brainly.com/question/15200315
#SPJ2
doy CORONITA a quien me ayude rapido que es un examen porfaaa
Answer:
thank you for the points
please guys help me with number 1
Answer:
Paracetamol
Formula
C8H9NO2
Two cars leave from Houston to go to different destinations. Car 1 travels at 62 mph for 30 minutes. How far did car 1 travel?
Answer:
31 miles lol
Explanation:
30 mins is half of an hour and they went 62 miles per hour so divide 62 by 2
What is atomic mass? the mass of the atom based on the mass of an atom of hydrogen-1 the mass of an atom based on the mass of an atom of carbon-12 the mass of the atom based on the mass of an atom of oxygen-16 the mass of an atom based on the number of electrons
Answer:
The mass of an atom based on the mass of an atom of carbon-12
Explanation:
an atom of ordinary hydrogen consists of an electron and a
Answer: hydrogen atom is an atom of the chemical element hydrogen. The electrically neutral atom contains a single positively charged proton and a single negatively charged electron bound to the nucleus by the Coulomb force.
Explanation:
An atom of ordinary hydrogen consists of one electron and one proton and zero neutrons.
What is a hydrogen atom?Hydrogen is a chemical element placed at the top of group 1 in the periodic table and is represented by the chemical symbol H and atomic number 1.
A hydrogen atom is the lightest atom of the element in the whole periodic table. Hydrogen exists as a gas of diatomic molecules having the formula H₂ at standard conditions. Hydrogen gas is tasteless, colorless, odorless, non-toxic, and highly combustible.
Hydrogen is constituting roughly 75% of all normal matter and is the most abundant chemical substance in the universe. Most of the hydrogen element on Earth exists in forms like water and organic compounds. Each atom of hydrogen (¹H) has one proton, one electron, and no neutrons.
Hydrogen element is nonmetallic and easily forms a single covalent bond with most nonmetallic elements, forming compounds like water.
Learn more about hydrogen, here:
https://brainly.com/question/28060590
#SPJ6
what is the difference in chemical energy between organic and inorganic materials?
Answer:
the difference is the presence of a carbon atom
Explanation:
How many moles are present in 1.39 grams of carbon?
C
R. F. M (Relative Formula Mass) of C=12
12g of C=1 mole
1.39g of C=(1*1.39)/12
=0.1158 moles
What is the common name for N2O? mononitrogen dioxide dinitrogen monoxide nitrogen oxide nitrous oxide.
Considering the IUPAC name, the common name for N₂O is nitrous oxide
IUPAC (International Union of Pure and Applied Chemistry), is the recognized authority in the development of standards for the naming of chemical compounds, through their Interdivisional Commitee on Nomenclature and Symbols.
The IUPAC name to N₂O is nitrous oxide. Nitrous oxide is commonly known as the laughing gas is a colorless gas with a pleasant, sweetish odor and taste that, when breathed, causes placidity to pain.
Learn more:
https://brainly.com/question/25759961https://brainly.com/question/23036094?referrer=searchResultshttps://brainly.com/question/25759613Answer:
on e2020 the first one is dinitrogen monoxide second one is nitrous oxide
Explanation:
How do you find the frequency of a recorder?
Answer:
Modern recorders are most commonly pitched at A=440 Hz, but among serious amateurs and professionals, other pitch standards are often found. For the performance of baroque music, A=415 Hz is the de facto standard, while pre-Baroque music is often performed at A=440 Hz or A=466 Hz.
Explanation:
How many deciseconds are
in 554 seconds?
Give your answer in standard form.
Answer:
5540
Explanation:
Answer:
5,440
Explanation:
10 deciseconds = 1 seconds
554 seconds = 5,440 seconds
Which liquid will evaporate more rapidly? Explain your answer in terms of intermolecular forces
acer
The electron configuration of na atom is 2,8,1. Give the electronic configuration of C D G H
Answer:
Explanation:
Record the letters in your triangle from left to right A MAGNESIUM CHLORATE B MAGNESIUM SULFATE C MAGNESIUM HYPOCHLORIDE D MAGANESE PERCHLORATE E MN C10 F MGMNO G MANGANESE CHLORIDE
list of charge of elements that do not form compound easily
Answer:
The highlighted words in the explanation.
Explanation:
A clue comes by considering the noble gas elements, the rightmost column of the periodic table. These elements—helium, neon, argon, krypton, xenon, and radon—do not form compounds very easily, which suggests that they are especially stable as lone atoms. What else do the noble gas elements have in common?
TRUE or FALSE the term “anti-inflammatory” likely means “against inflammation”
Answer:
True
ANTI MEANS AGAINST
Explanation:
2. What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?
Answer:
Q = mcT ...you can either substitute the molar heat capacity of water in the place of c or the specific heat capacity of water.
Explanation:
How does a phase change from solid to liquid occur in a substance?
A. Heat energy is released from the substance, weakening the electrical attraction between molecules.
B. Heat energy is released from the substance, strengthening the electrical attraction between molecules.
C. Heat energy is added to the substance, weakening the electrical attraction between molecules.
D. Heat energy is added to the substance, strengthening the electrical attraction between molecules.
Answer:
see below
Explanation:
1. Heat energy is added to the substance, weakening the electrical attraction between molecules.
2. Both the melting point and boiling point are lower.
3. dipole
4. Water and ethanol have different molecular structures.
5. The lone pairs of electrons in the oxygen atom causes the molecule to be bent; the oxygen atom has a partial negative charge, while the hydrogen atoms have partial positive charges.
[quizlet: captncrun]
Heat is a form factor that changes the solid from light to light to gaseous mediums. The phases take place in a cyclic manner.
The solid to liquid changes take place due to the melting or fusion, solid to gas take lace through the sublimation, liquid to gas is by vaporization, and gas to liquid is condensation. Thus the heat is added and leads to the weakening of the electrical attraction within the molecules.Hence the correct option is C.
Learn more about the phase change from solid to liquid occur in a substance
brainly.com/question/25664350.
Hurry Answer for a Brainlist
Answer:
The most accurate and percise player was Josh
how long do fresh cranberries last in the refrigerator?
Answer:
Three to four weeks
Explanation: I had cranberries and In like four weeks my mom forced me to get rid of them. They do stink when rotten ;(
The half-life of Palladium-100 is 4 days. After 16 days a sample of Palladium-100 has been reduced to a mass of 6 mg. What was the initial mass (in mg) of the sample
Answer:
96mg
Explanation:
Since the half-life of Palladium-100 is 4 days and the sample has been reduced after 16 days, that means the sample has undergone four half-lives. To find the intial mass, just work backwards:
6 x 2= 1212 x 2= 2424 x 2= 48 48 x 2= 96As you see, I've worked backwards from the four half-lives. So the initial mass after 16 days is 96 mg.
make short notes on all the form of energy
Answer:
The forms of energy are:
Radiant energyMechanical energyThermal energyNuclear energyElectrical energyChemical energyThese are the six forms hope you can write short notes on them.
an atom with 3 protons that loses an electron becomes…
Answer:
A +1 Ion of Lithium
Explanation:
Lithium has the atomic number of 3, therefore it has 3 protons
An electron has a negative charge, so losing an electron gives an atom a positive charge.
Answer:
Positive 1 ion of lithium
Explanation:
hope this helps!
Electrical Bonding and Kinetic Energy Quick Check
2. Which statement describes the effect of adding more energy to a system, assuming a phase change does not occur?(1 point)
A. The particles within the system will have greater motion, and the temperature will decrease.
B. The particles within the system will have less motion, and the temperature will increase.
C. The particles within the system will have less motion, and the temperature will decrease.
D. The particles within the system will have greater motion, and the temperature will increase
3. Which statement correctly describes how attractions that hold particles break?(1 point)
A. Attractions occur due to gravitational forces. When particles have low enough energy, these forces can no longer keep particles together.
B. Attractions occur due to electrostatic forces. When particles have low enough energy, these forces can no longer keep particles together.
C. Attractions occur due to electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.
D. Attractions occur due to gravitational forces. When particles move fast enough, these forces can no longer keep particles together.
4. Which statement explains why a rubber band analogy is not a perfect comparison for bonds in a substance when considering phase changes?(1 point)
A. For a phase change from solid to liquid, the bonds break completely and particles can move independently of each other.
B. For a phase change from solid to liquid, the bonds do not break completely and particles can still slide past each other.
C. For a phase change from liquid to gas, the bonds do not break completely and particles can still slide past each other.
D. For a phase change from liquid to gas, the bonds break completely and particles can move independently of each other.
5. The boiling point of benzene is 80ºC. Which pair of samples will have the same average kinetic energy as benzene molecules?(1 point)
A. a sample of liquid benzene at 70ºC and a sample of gaseous benzene at 90ºC
B. two samples of liquid benzene, one at 70ºC and the other at 80ºC
C. two samples of gaseous benzene, one at 80ºC and the other at 90ºC
D. a sample of liquid benzene at 80ºC and a sample of gaseous benzene at 80ºC
When particles move fast enough, these forces can no longer keep particles together.
Recall that the particles of a substance are in constant random motion. Hence, when more energy is added to the system, the particles within the system will have greater motion, and the temperature will increase.
The forces that keep molecules together in a particular state of matter are electrostatic forces. When particles move fast enough, these forces can no longer keep particles together.
It is common to use the analogy of an elastic material to represent the bonding between atoms in molecules. However, this analogy is not apt in a phase change because, for a phase change from liquid to gas, the bonds break completely and particles can move independently of each other.
We know that the average kinetic energy of the molecules of a substance depends on the temperature of the body. Therefore, a sample of liquid benzene at 80ºC and a sample of gaseous benzene at 80ºC will have the same average kinetic energy as benzene molecules.
Learn more: https://brainly.com/question/6284546
When a bat hits a ball, what is the impulse?
a. the change in velocity multiplied by the force
b. the force multiplied by the time objects are in contact
c. the mass multiplied acceleration
d. the mass multiplied by the force
Answer:
The answer is B.
Explanation:
the force multiplied by the time objects are in contact
In a star, nuclear fusion occurs in the
A. core
B. radiative zone
C. photosphere
D. corona
Answer:
A. Core
Explanation:
The collisions which occur between the hydrogen atoms starts to heat the gas in the cloud. Once the temperature reaches 15,000,000 degrees Celsius, nuclear fusion takes place in the center, or core, of the cloud. The tremendous heat given off by the nuclear fusion process causes the gas to glow creating a protostar.
In a star, nuclear fusion which is a type of nuclear reaction occurs in the core.
What are nuclear reactions?There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.
In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.
In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.
Learn more about nuclear reactions,here:
https://brainly.com/question/12786977
#SPJ5
What is the maximum number of electrons in the following energy level? n = 1
Maximum number of electrons in nth energy level
[tex]\\ \sf\longmapsto 2n^2[/tex]
Now
n=1Max electrons
[tex]\\ \sf\longmapsto 2(1)^2[/tex]
[tex]\\ \sf\longmapsto 2e^-[/tex]
what is the periodic trend for electronegativity
Answer:
mark me brainlest
Explanation:
Electronegativity values generally increase from left to right across the periodic table. Electronegativities generally decrease from top to bottom of a group. The highest electronegativity value is for fluorine.
Answer:
"Electronegativity increases as you move from left to right across a period because the number of charges on the nucleus increases." (sstudy30 on Quizlet)
Explanation:
It explains itself haha!
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
If you have 1 mol xe and 1 mol f₂, how many moles of xef₄ can you create in the following chemical reaction? xe (g) 2 f₂ (g) → xef₄ (g).
The number of moles of XeF4 that can be created would be 0.5 moles.
From the equation of the reactiobn:
Xe (g) 2 F₂ (g) ---> XeF₄ (g)
The mole ratio of Xe to F2 is 1:2. Hence, in the presence of 1 mole Xe and 1 mole F2, F2 would be limiting the reaction.
This means that the amount of F2 would determine the amount of XeF4 that would be produced from the reaction.
The mole ratio of F2 to XeF4 according to the equation is 2:1. This means that for every 1 mole of F2 introduced into the reaction, 0.5 moles of XeF4 will be produced.
In this case, 1 mole of F2 is introduced. Thus, the mole of XeF4 that would be produced would be:
1/2 = 0.5 moles.
More on stoichiometric calculations can be found here: https://brainly.com/question/8062886?referrer=searchResults
NaCl express your answer as an Ion
Does anyone know what the answer for this would be
Answer:
iconic compound
Explanation:
Why do metals form cations and nonmetals form anions?
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Metals have tendency to loose electrons in order to get noble gas configuration, therefore they loose electrons to form Cations (positively charged ions)
for example ~ Sodium forms Na+
And
Non - metals have tendency to gain electrons in order to attain noble gas configuration , hence they gain electron from somewhere and bears a negative charge forming Anion.
for example ~ Chlorine forms Cl-
Why can’t you split an element in half?
Answer:
It depends on the atom, or more specifically, on the size of its nucleus. There is a competition between the electrical repulsion of the protons (that drives the nucleus apart) and the attraction of the protons and neutrons (due to chromodynamics). For nuclei above a certain size, the repulsion tends to win
Explanation:
hope this helps
