Steel stirrups in reinforced concrete beams help to resist ________________. Select one: a. Bending b. Deflection c. Shear d. Tension

Answers

Answer 1

Answer:

Shear is the answer

hope it helps!


Related Questions

1.Which thematic group uses technology to direct the behavior of dynamical systems, ensuring that they behave in a predictable manner?
2.Which thematic group creates circuits with miniature, packaged components that directs and control electricity?

a.Communication Systems
b.Control Systems
c.Computer Systems
d.Energy Systems
e.Electronic Systems

Answers

Control systems govern the behavior of dynamic systems, while electronic systems are the ones that package the tiny components needed to conduct electricity. Thus, option E is correct.

What exactly are thematic groups?

Thematic groups are made up of individuals who focus on the same theme or idea. Thematic teams working on various initiatives and concepts are made up of individuals with experience in various systems.

The function of the control system has been to regulate dynamic systems in order to bring about the desired result.

The function of the electronic system thematic group is to package electronic miniatures in systems that play the job of directing electricity. Thus, option E is correct.

Learn more about thematic group, here:

https://brainly.com/question/32731

#SPJ1

the plastic region of the stress-strain curve for a metal is characterized by:

Answers

The plastic region of the stress-strain curve for a metal is mainly characterized by a power function known as the flow curve.

What is the plastic region?

The plastic region of a stress-strain curve can be defined as the portion where some permanent deformation occurs in a material, even if the load is removed.

Based on scientific information and records, the plastic region of the stress-strain curve for a metal is mainly characterized by a power function known as the flow curve.

Read more on plastic region here: https://brainly.com/question/6869400

#SPJ12

An open tank contain oil of specific gravity 0.75 on top of
water. If the depth of oil is 2m and the depth of water is 3m.
calculate the gauge and absolute pressures at the bottom of the
tank when the atmospheric pressure is 1bar

Answers

Let's not take into account atmospheric pressure.

Pressure P = Pressure of oil column + Pressure of water column

= h1 . d1.g + h2.d2. g

=( 0.5 x 800 x 9.8) + ( 1x 1000x 9.8) = 3920+ 9800 = 13720

Hence guage pressure at bottom is

P= 13720 N/ m^2

Silicon chips are used primarily in ?

Answers

Answer:

4th generation computers

Silicon chips are used primarily in relays. The correct option is B.

What are silicon chips?

The brain of the device is made up of silicon chips, which control all of its internal mechanisms. Tablets, smartphones, and laptops are a few examples.

The invention of silicon chips led to the revolutionization and miniaturization of technology, as well as the creation of the contemporary computer.

Instead of the slow computers that used to take up entire rooms, it made it possible to create fast computers that fit in people's homes and eventually portable computers.

Relays are electrically powered switches that operate by receiving electrical signals from other sources to open and close circuits.

Therefore, the correct option is B. relays.

To learn more about silicon chips, refer to the link:

https://brainly.com/question/11077408

#SPJ5

The question is incomplete. Your most probably complete question is given below:

A. integrated circuits

B. relays

C. motors

D. transformers

Refrigerant 134a passes through a throttle valve as part of a refrigeration cycle. The fluid enters the valve as compressed liquid at a pressure of 0.8 MPa and a temperature of 25 C. It exits the valve at -20 C. Find the exit pressure and the exit specific internal energy.

Answers

The exit pressure will be 1.3273 bar = 0.1327 MPa and the exit specific internal energy 228.61 KJ/Kg .

1.) In graph,

1-2 = Compressor

3-4 = Throttle value

[tex]T_{1} \\[/tex] = [tex]T_{4}[/tex] = -20°C = 253 K

[tex]T_{3}[/tex] = 25°C = 298 K

[tex]P_{3}[/tex] = 0.8 MPa

Assuming saturated fluid is entering the value at point (3),

using table of R-134a properties

∵ [tex]h_{3} =h_{4}[/tex] = 234.49 KJ/Kg (at 25°C,8 bar)

at [tex]T_{3}[/tex] = 25° , [tex]P_{3}[/tex] = 0.8 MPa =8 bar

At -20°C,   [tex]hf_{4}[/tex] = 173.6 KJ/Kg

                 [tex]hg_{4}[/tex] = 386.6 KJ/Kg

[tex]h_{4} = hf_{3} + n_{4} ( hg_{4} - hf_{4} )[/tex] = 234.49

173.6 + [tex]n_{4}[/tex] [386.6 - 173.6] = 234.49

             [tex]n_{4}[/tex] = 0.285

[tex]P_{4} = P_{1} = P_{sat}[/tex] = 1.3273 bar = 0.1327 MPa

2.)

Exit specific internal energy, using table R-134a

[tex]U_{4} = uf_{4} + n_{4} (ug_{4} - uf_{4} )[/tex]

at -20°c, [tex]uf_{4}\\[/tex] = 173.65, ufg = 192.85 KJ/ Kg

[tex]U_{4}[/tex] = 173.65 + 0.285 (192.85)

[tex]U_{4}[/tex] = 228.61 KJ/Kg

Learn more about Refrigerant here https://brainly.com/question/26395073

#SPJ10

A 7-hp (shaft) pump is used to raise water to an elevation of 15 m. If the mechanical efficiency of the pump is 82 percent, determine the maximum volume flow rate of water.

Answers

The maximum volume flow rate of water is determined as 0.029 m³/s.

Power of the pump

The power of the pump is watt is calculated as follows;

1 hp = 745.69 W

7 hp = ?

= 7 x 745.69 W

= 5,219.83 W

Mass flow rate of water

η = mgh/P

mgh = ηP

m = ηP/gh

m = (0.82 x 5,219.83)/(9.8 x 15)

m = 29.12 kg/s

Maximum volume rate

V = m/ρ

where;

ρ is density of water = 1000 kg/m³

V = (29.12)/(1000)

V = 0.029 m³/s

Learn more about volume flow rate here: https://brainly.com/question/21630019

#SPJ12

Chemicals pose a variety of hazards. Name six (6) types of health hazards.

Answers

Chemicals pose a variety of hazards the six (6) types of health hazards are Corrosives, Irritants, Sensitizers, Carcinogens, Mutagens,Flammable.

How do you become aware of chemical dangers?

To become aware of if a substance is dangerous, test the product's box label and/or the SDS that is to be had from the supplier. If a product isn't categorized as a dangerous chemical beneathneath the Work Health and Safety Act 2011, a SDS isn't required and consequently might not be availableIn the workplace, we discover  varieties of chemical dangers: fitness dangers and physicochemical dangers.1Asphyxiants.

There are many varieties of dangerous chemicals, such as neurotoxins, immune agents, dermatologic agents, carcinogens, reproductive toxins, systemic toxins, asthmagens, pneumoconiotic agents, and sensitizers.

Read more about the health :

https://brainly.com/question/1382377

#SPJ1

When starting a vehicle with an automatic transmission, be sure the gear selector is set in (P)ark or ________.

Answers

When starting a vehicle with an automatic transmission, be sure the gear selector is set in (P)ark or (D)rive.

What are automatic cars?

Automatic cars are those who have automatic options for shifting of gears. We do not have to adjust the gears by ourselves.

These cars have mode of Park, if we are moving the car, to start the car we must change it from Park to drive mode.

Thus, the fill the blank is Drive.

Learn more about automatic cars

https://brainly.com/question/14646065

#SPJ1

Role of energy consumption in formulating energy policies.

Answers

The Role of energy consumption in formulating energy policies are:

It is the regulatory framework on which global attractiveness is built.It helps widen access to electricity.It helps improve clean cooking fuels.It helps in elimination of deadly air pollution.

What is the importance of energy policy?

Energy policy is known to be a vital factor in economic development as it is known to be the total regulatory framework that helps to know the boast in global attractiveness and others.

Note that he Role of energy consumption in formulating energy policies are:

It is the regulatory framework on which global attractiveness is built.It helps widen access to electricity.It helps improve clean cooking fuels.It helps in elimination of deadly air pollution.

Learn more about Energy policy from

https://brainly.com/question/10732684

#SPJ1

what is the last item on the vehicle starting checklist

Answers

The last item on the vehicle starting checklist before a driver begins to travel is for the driver to release the service brake.

What does it mean to release the brake?

The Release Parking Brake message implies that your parking brake is said to be currently engaged and as such one needs to  release the parking brake before one can be able to drive the vehicle.

Therefore, The last item on the vehicle starting checklist before a driver begins to travel is for the driver to release the service brake.

See full question below

what is the last item on the vehicle starting checklist before a driver begins to travel?

Learn more about checklist from

https://brainly.com/question/16041035

#SPJ11

The selective thickness shims are measured with a(n): Group of answer choices hydraulic press. outside micrometer. dial indicator. depth micrometer.

Answers

The selective thickness shims are measured with an outside micrometer.

What is a micrometer?

It should be noted that a micrometer simply means an instrument for making precise linear measurement of dimensions.

In this case, the selective thickness shims are measured with an outside micrometer.

Learn more about micrometer on:

brainly.com/question/2176082

#SPJ12

When reassembling a locking hub mechanism, it is a good idea to replace the: Group of answer choices retaining plate. all snap rings. bearing seal. axle shafts.

Answers

When reassembling a locking hub mechanism, it is a good idea to replace the bearing seal.

What is a bearing seal?

It should be noted that the bearing seal is used to prevent contaminants from reaching the inside of the parts and also from preventing the lubricant leaking.

In this case, when reassembling a locking hub mechanism, it is a good idea to replace the bearing seal.

Learn more about bearing on:

brainly.com/question/22719608

#SPJ12

A prairie house built by Frank Lloyd Wright. The house has rectangular angles, close to the ground, and a bank of windows. The building is made of brick. The house above has an overall __________ emphasis. a. vertical b. horizontal c. diagonal

Answers

The house has an overall horizontal emphasis.

What is emphasis?

Emphasis in architecture is the strategy that is used to draw the viewer's attention to a design.

Here, the house has rectangular angles, close to the ground, and a bank of windows. This depicts a horizontal axis.

Learn more about architecture on:

brainly.com/question/9760486

#SPJ12


(a)Identify the relevant population for the below foci, and suggest the appropriate sampling
design to investigate the issues, explaining why they aare appropriate. Wherever necessary
identify the sampling frame as well.
A public relations research department wants to investigate the initial reactions of heavy soft-
drink users to a new all-natural soft drink

Answers

The relevant population for the below foci example is a small population and:

When a firm wants to investigate the first response of heavy fruit drink uses to a new all natural fruit drink and the best sampling to use random sampling.

What is Simple random sampling?

This is known to be a kind of probability sampling where the researcher randomly takes a subset of participants from a given population.

Note that the member of the population has an equal chance of being selected and as such, in the case above, The relevant population for the below foci example is  small population and:

A firm wants to investigate the first response of heavy fruit drink uses to a new all natural fruit drink and the best sampling to use random sampling.

Learn more about population from

https://brainly.com/question/25630111

#SPJ1

You should have at least a ___ mph speed advantage when passing another vehicle

Answers

A driver should have at least a 10 mph speed advantage when overtaking (passing) another vehicle.

What is a speed limit?

A speed limit refers to the maximum amount of speed that is legally permitted or allowed in a specific area for safety. Thus, this limit must be abided and strictly adhered to by all road users such as drivers of a vehicle.

According to the highway traffic code and regulations, a driver should have at least a 10 mph speed advantage when overtaking (passing) another vehicle.

Read more on safety here: https://brainly.com/question/14751268

#SPJ12

The complete stress distribution obtained by superposing the stresses produced by an axial force and a bending moment is correctly represented by _______.

Answers

The complete stress distribution obtained by superposing the stresses produced by an axial force and a bending moment is correctly represented by F/A - (My)/(Iz).

What is the distribution of pressure at some stage in bending?

Compressive and tensile forces expand withinside the path of the beam axis beneath neath bending loads. These forces set off stresses at the beam. The most compressive pressure is observed on the uppermost fringe of the beam whilst the most tensile pressure is positioned on the decrease fringe of the beam.

The bending pressure is computed for the rail through the equation Sb = Mc/I, wherein Sb is the bending pressure in kilos in keeping with rectangular inch, M is the most bending second in pound-inches, I is the instant of inertia of the rail in (inches)4, and c is the space in inches from the bottom of rail to its impartial axis.

Read more about beam;

https://brainly.com/question/25329636

#SPJ1

____ lanes give drivers the time and space to reduce their speed to what is posted and/or prepare for the sharpness of the curve

Answers

Exit lanes give drivers an ample time and space to minimize (reduce) their speed to what is posted and prepare them for the sharpness of the curve.

What is a speed limit?

A speed limit is the maximum amount of speed that is legally permitted in an area for safety. Hence, this limit must be abided and strictly adhered to by all road users such as drivers of a vehicle.

As a safety precaution, Exit lanes are constructed to give drivers an ample time and space to minimize (reduce) their speed to the required  speed limit posted and prepare them for the sharpness of the curve.

Read more on safety here: https://brainly.com/question/14751268

#SPJ12

What line separates two lanes traveling in the same direction

Answers

Answer:

White lane lines separate lanes of traffic moving in the same direction. (UK)

In the US, we tend to have white lines separating lanes that go in the same direction, & yellow lines that separate opposing traffic.

5. A 15-nC point charge is at the origin in free space. Calculate V₁ if point P, is located at
P₁(-2,3,-1) and
(a) V0 at (6,5,4).
(b) V-0 at infinity.
(c) V5 V at (2,0,4).

Answers

I don’t know lm so sorry

. In the counter-current heat exchanger, the liquid food is cooled from 73°C to 38°C at the rate of 2500 kg h', using water at 15°C which leaves the heat exchanger at 40°C. The pipework 2.5cm in diameter is constructed from stainless steel 3mm thick; the surface film heat transfer coefficients are 1200 Wm³K on the liquid food side and 3000Wm³K-¹ on the water side of the pipe. Calculate the Overall heat transfer coefficient and the length of pipe required (Note: specific heat of water and liquid food is 4.18 kj/kg°C and 3.17 kj/kg C respectively) (6marks).

Answers

The Overall heat transfer coefficient and the length of pipe required was 9.48x10 J and the length of pipe required is 57m.

What is the supposed via way of means of heat transfer?

Warmness transfer, all or any of numerous forms of phenomena, taken into consideration as mechanisms, that deliver power and entropy from one place to another. The unique mechanisms are commonly known as convection, thermal radiation, and conduction.

1/U= 1/ha+x/k+1/hk=1/1200+3/21+1/3000= 1.31 x 10^-3.Now U= 763.6 Wm^-2-C-1.To length of pipe required= Q = UAdelta m.= A=3.142xDl= l =4.48/3.142x0.025=57 m.

Read more about the length :

https://brainly.com/question/2217700

#SPJ1

What are the minimum and maximum required footing projections for a concrete footing having a thickness of 8 inches

Answers

The minimum and maximum required footing projections for a concrete footing having a thickness of 8 inches will be 4 inches and 8 inches.

What is projection?

It should be noted that footing projections are important for construction purposes

In this case, the minimum and maximum required footing projections for a concrete footing having a thickness of 8 inches will be 4 inches and 8 inches.

Learn more about projection on:

brainly.com/question/3703881

#SPJ12

A cantilever beam AB of length L has fixed support at A and spring support at B.
The spring behaves in a linearly elastic manner with stiffness k. If a concentrated
load P is applied at B, use any type of method to find:
(i) the force in the spring
Fb
,
(ii) the downward displacement
B 
of end B. (15%)

Answers

The force in the spring will be [tex]F =\dfrac{KPl^3}{3EI}[/tex].

The deflection of the beam will be [tex]\rho[/tex] = [tex]0.15(\dfrac{KPL^3}{3EI})[/tex]

What is a cantilever beam?

A rigid, horizontally extending structural member known as a cantilever is supported at only one end. Typically, it extends from a solidly affixed flat vertical surface, such as a wall.

Given that:-

A cantilever beam AB of length L has fixed support at A and spring support at B.The spring behaves in a linearly elastic manner with stiffness k. If a concentrated load P is applied at B.

The spring force will be calculated as:-

[tex]F = kx[/tex]

Deflection will be given by:-

[tex]x = \dfrac{PL^3}{3EI}[/tex]

The spring force will be calculated by:-

[tex]F = \dfrac{KPL^3}{3EI}[/tex]

The deflection of the beam will be given as:-

[tex]\rho = \dfrac{0.15KPL^3}{3EI}[/tex]

Therefore the force in the spring will be [tex]F =\dfrac{KPl^3}{3EI}[/tex]..The deflection of the beam will be [tex]\rho[/tex] = [tex]0.15(\dfrac{KPL^3}{3EI})[/tex]

To know more about Cantilever beam follow

https://brainly.com/question/16791806

#SPJ1

The elbow joint is designed to allow flexing (bending) and extension (straightening) of the forearm. What specific structural combination at the elbow joint prevents it from hyperextension (bending backward)

Answers

The specific structural combination at the elbow joint that prevents it from hyperextension is olecranon process and olecranon fossa on humerus.

What is olecranon process?

Olecranon process of the ulna forms the outer bump of the elbow and fits into the fossa of the humerus when the arm is extended.

What is olecranon fossa on humerus?

The olecranon fossa is a deep triangular depression on the posterior side of the humerus, superior to the trochlea.

It provides space for the olecranon of the ulna during extension of the forearm.

Thus, the specific structural combination at the elbow joint that prevents it from hyperextension is olecranon process and olecranon fossa on humerus.

Learn more about olecranon process here: https://brainly.com/question/15380444

#SPJ12

Suppose that out of 500 lottery tickets sold, 200pay off at least the cost of the ticket. Now supposethat you buy 5 tickets. Find the probability that youwill win back at least the cost of 3 tickets.

Answers

The probability that one will win back at least the cost of three tickets is approximately 0.31744. This is solved using Binomial Distribution Model.

What is the Binomial Distribution Model?

The Binomial Distribution Model is a mathematical model of probability that allows one to decipher the probability of success of a group of possibilities within a range of specifically repeated processes.

What is the calculation for the above?

Given that non-losing tickets (n) is: 5

Tickets gotten with non-losing probability p = 2/5 = 0.4

Note that probability here is given as:

Pr [X ≥ 3] = [tex]\sum_{x=3}^{5}.[/tex][tex]\binom{n}{x}[/tex] pˣ (1-p)ⁿ⁻ˣ

→ [tex]\sum_{x=3}^{5}.[/tex][tex]\binom{n}{x}[/tex] (0.4)ˣ (0.6)⁵⁻ˣ

= 992/3125

= 0.31744

Learn more about binomial distribution at:
https://brainly.com/question/14565246
#SPJ1

You will get 50 points after giving proper answer

Answers

Answer:

i don't know

please mark me brainlist

a set of several wires wrapped in tape or enclosed in a plastic sheath is referred to as

Answers

Answer:

A. Wire Harness

____ grinders are used to grind diameters, shoulders, and faces much like the lathe is used for turning, facing, and boring operations.

Answers

Answer:

Cylindrical

Explanation:

A cylindrical grinder is a tool for shaping the exterior of an item. Although cylindrical grinders may produce a wide range of forms, the item must have a central axis of rotation. Shapes such as cylinders, ellipses, cams, and crankshafts are examples of this. Cylindrical grinding machines are specialized grinding machines that are used to process cylinders, rods, and similar workpieces. The cylinders revolve in one direction between two centers, while the grinding wheel or wheels are close together and rotate in the other direction.

The velocity of the water jet discharging from the orifice can be obtained from v=\12ih, where h = 2 m is the depth of the orifice from the water surface. Determine the time for a particle of water leaving the orifice to reach point B and the horizontal distance x where it hits from surface.

Answers

The time for a particle of water leaving this orifice to reach point B and the horizontal distance are 0.553 seconds and 3.46 meters respectively.

How to calculate the time?

First of all, we would determine the velocity of the water jet discharging from the orifice by using this formula:

V = √(2gh)

V = √(2 × 9.81 × 2)

V = 6.264 m/s.

Next, we would determine the time taken to reach point B as follows:

S = Sa + Uy(t) + ½at²

-1.5 = 0 + 0(t) + ½ × (-9.81) × t²

t = 0.553 seconds.

Now, we can determine the horizontal distance:

x = xa + Vt

x = 0 + 6.264(0.553)

x = 3.46 meters.

Read more on horizontal distance here: https://brainly.com/question/17372548

#SPJ1


20. A spur gear pinion and gear shown on a drawing have a diametral pitch of 12. The pitch radius of the pinion is 1.500 inches and the gear ratio is
specified to be 1:3. On the print, you would expect the pitch diameter of the gear to be
OA. 9.00 inches.

Answers

On the print you would expect the pitch diameter of the gear to be 9.00 inches. Option A is right.

How to solve for the diameter

Gear ratio = 1/3

This is solved as number of teeth on pinion / teeth on gear

= Np/Ng

The pitch diameter = 1.5 x 2

= 3

Diametral pitch = 12

NP = 3 x 12 = 36

This is the teeth on piston

Ng = 3NP

Ng = 3 * 36

= 108

Hence pitch diameter = 108/12 = 9

Read more on pitch diameter here:

https://brainly.com/question/13039932

#SPJ1

A composite wall is composed of two layers, each with constant properties. the thermal conductivity of layer 1 is twice that of layer 2. for steady-state conduction with no thermal generation, the correct temperature distribution is:

Answers

Given the indices stated above, the correct temperature distribution is: k1 = 2k2. See the definition of temperature distribution below.

What is temperature distribution?

The Solution to the linear heat flow equation is what is known as thermal distribution.

It measures heat transfer with respect to normal or natural phenomena such as:

Irradiationconduction; andconvection.

Learn more about temperature distribution at:
https://brainly.com/question/15199818
#SPJ1

Other Questions
What is the scale factor of a drawing if the scale is 1 inch equals 4 feet A 2-column table with 3 rows. Column 1 is labeled x with entries 2, 4, 5. Column 2 is labeled y with entries 5, 10, 12.5.Use the information in the table to find the constant of proportionality and write the equation.The constant of proportionality is .The equation that represents this proportional relationship is Write a discussion with can argument - a claim or thesis statement - that you can support with historical evidence. The historical evidence may come from the chapter (the image above), Please make sure you re-write all information into your own words, and make sure your original post is at least 250 words. Which technique is used with network address translation (nat) where a source port chosen by a client is the same port used by a router? a sample contains 100 g of radioactive isotope. How much radioactive isotope will remain in the sample after 1 half-life? in tabular form differentiate the first four generations of computer How does the narrator in "Top of the Food Chain" help advance the story's idea of thoughtless decisions leading to unintended consequences?A. He is cold-hearted so that readers feel morally superior to him.B. He provides commentary on the false science used in the story.C. He is unreliable, leading readers to question what he is saying.D. He is clearly a powerful person, leading the story to be taken more seriously. Identify each statement that describes a benefit of the scientific method. (Select all choices that apply)Group of answer choicesa) It provides an answer to questions immediately.b) It gives scientists a standardized way to approach a problem.C) It gives scientists a common vocabulary for sharing information.D) It reduces bias and judgment from personal experiences. A resistor has a resistance of 8.2 k. If a voltage of 15.9 V were placed across it, what would be the current, in mA? Give the answer to two decimal places; don't worry if the computer adds zeroes. There are three types of unemployment: frictional, structural, and cyclical. Which one is the worst for workers and what could they do to avoid it? Explain Ruthe lost her job last year, and she's fallen three months behind on the mortgage payments for her baltimore home. she seeks the services of chuck, a foreclosure consultant. chuck charges ruthe $1,000 up front, then disappears and fails to return ruthe's calls. phifa permits ruthe to ______. Read the rough-draft paragraph.More than likely, fellow volunteers will have many common interests and ideals. After all, volunteers usually seek opportunities to use their time and talents for issues they care about, and this is often a good starting point for many friendships. As co-volunteers, hours will be spent together learning from one another and inspiring each other while working to achieve a common goal. Teaming up with others to solve community problems and making changes for the better, not surprisingly, often leads to long-lasting bonds.Which topic sentence should be added to this body paragraph?Local community programs provide opportunities for volunteers to share their expertise.Volunteering for local community programs enables people to establish new friendships.Acquaintances made while volunteering for a project are rarely continued beyond the projects conclusion.Every community has programs that will gladly accept the services of enthusiastic volunteers. Which group within the United States would most likely have supported theworldview represented in the diagram?OA. SuffragistsB. NativistsOC. PopulistsD. Settlers What is the slope of this line? 4 34 34 3 Number graph ranging from negative 5 to 5 on both the x and y axis. A line passes through the point begin ordered pair 0 comma 2 end ordered pair and the point begin ordered pair 4 comma negative 1 end ordered pair Why was the Persia ultimately unsuccessful in conquering Greece at the battle of marathon Question 9 of 20Which action would the Enlightenment philosopher Baron Charles deMontesquieu most strongly support?A. A country adopts a constitution that divides its government intobranches with equal power.B. A government places high taxes on wealthy citizens andredistributes the money to the poor.C. A political leader serves as both a legislator and a judge for acountry's highest court.D. A president implements several popular laws after the legislaturerefuses to approve them.SUBMIT submit Can someone help me out with this, its urgent. Its geometry Are the equations -11(x-2)=8 and x-2=8+11 equivalent? PLEASE HELP WITH THIS PROBLEM! Robin thicke and pharrell williams were ordered to pay $5 million for copying part of which marvin gaye song in their hit blurred lines?.