Step 1

Start with a circle with a center O and a point on the circle P.

Step 2

Using a straight edge draw a line that starts at O and goes through P.

Step 3

Put your compass on P and draw two points, Q and R, on the line OP. These points should be the same distance from P.

Step 4

Measure out the distance from Q to R.

Step 5

Draw the point S by creating two
arcs from points Q and R. Use the distance measured in Step 4.

Step 6

Draw the tangent line PS.

The degrees of freedom for a two-sample t-test with equal variances depend on the sample sizes of the two populations being compared.

The degrees of freedom for this scenario, we need to first understand the statistical test that would be used to compare the average errors of the two processes.

In this case, the appropriate test would be a two-sample t-test, assuming equal variances.
The formula for calculating the degrees of freedom for a two-sample t-test with equal variances is as follows:

df = n1 + n2 - 2

where n1 and n2 are the sample sizes of the two populations being compared. In this case, since process A is the first population, we can assume that n1 represents the sample size for process A.

To know more about degrees visit:-

https://brainly.com/question/26006191

#SPJ11

The function y = 14(1.49)ˣ is categorized as growth with 49% percentage increase

From the question, we have the following parameters that can be used in our computation:

y = 14(1.49)ˣ

An exponential function is represented as

y = abˣ

If b > 1, then it is a growth function

Otherwise, it a decay function

Using the above as a guide, we have the following:

y = 14(1.49)ˣ is a growth function because 1.49 is greater than 1

The percentage increase is then calculated as

percentage increase = 1.49 - 1

percentage increase = 0.49

Express as percentage

percentage increase = 49%

Hence, the percentage increase is 49%

Read more about exponential functions at

brainly.com/question/2456547

#SPJ1

The value of the length of the hypotenuse is,

⇒ c = √85

Since, Three vertices and three angles totaling 180 degrees make up a triangle, a three-sided polygon with three sides.

And, Two rays (half-lines) that share a terminal make up an angle. The rays serve as the angle's sides, occasionally serving as the angle's legs and occasionally serving as its arms, while the latter is referred to as the vertex of the angle.

We have to given that;

In triangle ,

Perpendicular side = 9 mm

Base = 2 mm

Since, We know that;

The Pythagorean theorem states that the square of the hypotenuse of a right triangle equals the sum of the squares of its two opposite sides.

Hence, By Pythagoras theorem we get;

⇒ Hypotenuse² = Perpendicular² + Base²

⇒ c² = 9² + 2²

⇒ c² = 81 + 4

⇒ c = √85

Thus, The length of the hypotenuse is,

⇒ c = √85

Learn more about the triangle visit;

brainly.com/question/1058720

#SPJ1

The best simulation to model the scenario of randomly selecting widgets and recording them as defective or working is a Bernoulli trial simulation.

A Bernoulli trial simulation is used when there are only two possible outcomes, such as success or failure. In this case, the two outcomes are defective or working widgets. The simulation involves randomly selecting a widget and recording whether it is defective or working. This process is repeated multiple times to generate a sample of widgets. The probability of success, or the proportion of defective widgets, is known and remains constant throughout the simulation. This type of simulation is appropriate for modeling the scenario because it allows for the calculation of the probability of selecting a defective widget and can be used to estimate the proportion of defective widgets in the factory's production.

Learn more about Bernoulli trial simulation here: brainly.com/question/31825823

#SPJ11

The probability that the first grape candy chosen from the bag will be, at least, the third candy chosen overall is 0.5608.

To solve this problem, we need to use the probability formula:
P(at least third grape candy) = P(first candy is not grape) x P(second candy is not grape) x P(third candy is grape) + P(first candy is not grape) x P(second candy is grape) x P(third candy is grape) + P(first candy is grape) x P(second candy is not grape) x P(third candy is grape) + P(first candy is grape) x P(second candy is grape) x P(third candy is grape)

From the given information, we know that the probability of choosing a grape candy from the bag is 26%. Therefore, the probability of choosing a non-grape candy is 74%.

Using this information, we can substitute the values into the formula:

P(at least third grape candy) = 0.74 x 0.74 x 0.26 + 0.74 x 0.26 x 0.26 + 0.26 x 0.74 x 0.26 + 0.26 x 0.26 x 0.26

Simplifying this expression, we get:

P(at least third grape candy) = 0.4524 + 0.0508 + 0.0508 + 0.0068

P(at least third grape candy) = 0.5608

Therefore, the probability that the first grape candy chosen from the bag will be, at least, the third candy chosen overall is 0.5608.

To know more about Probability visit:

https://brainly.com/question/32004014

#SPJ11

A. From the stem and leaf plot below, there are about 28,000 cars manufactured before 2000.

B. lower quartile (Q1) is between the 7th and 8th values (1995+1997)/2 = 1996. Upper quartile is  the 23rd and 24th values (2009 + 2010) = 2009.5.

C. The number of cars in the city that were manufactured between 1996 and 2009.5 is 37100.

D. To determine the number of car manufactured in 1996 and 2009.5, first determined the relevant proportions from the sample data. Then, multiply the proportion by the total number of cars in the city to estimate the number of cars manufactured before between 1996 and 2007.5,

A. To find the number of cars manufactured at the given period, we find the number of cars sampled that were created before 2000. From the stem-and-leaf plot, we can see that there are 12 cars manufactured before 2000.

Proportion of cars = 12/30 = 0.4.

Using the proportion, we find the number of cars manufactured before 2000.

70,000 × 0.4.

=28,000

B The  lower quartile (Q1) is the 25th percentile, and the upper quartile (Q3) is the 75th percentile.

= 0.25×(n+1)              

= 0.25×(30+1)

= 7.75 Therefore the lower quartile is between 7th and 8th values.

Q1 = (1995+1997)/2 = 1996.

0.75×(n+1)

= 0.75×(30+1)

= 23.25  Therefore the upper quartile is between 23rd and 24th values.

(2009+2010)/2 = 2009.5

C. There are 16 cars manufactured between 1996 and 2009.5

16/30 = 0.53

= 70,000×0.53

= 37100

The answer provided is based on the stem and leaf plot below

3. Brittney randomly selected 30 cars in a parking lot and determined each car's year of manufacture. She made this stem- and-leaf plot to show the results.

CARS IN PARKING LOT-YEAR OF MANUFACTURE

197 | 1

198 | 26

199 | 345577899

200 | 12455677899

201 | 0011222

Key: 197 |1 = 1971

A There are about 70,000 cars in the city where Brittney lives. According to Brittney's data, about how many of the cars in her city were manufactured before the year 2000?

Find more exercises on stem-and-leaf plot;

https://brainly.com/question/15880485

#SPJ1

The percent of Lan's budget that will go towards savings is 35%

The correct option is; 35%

A percentage is a representation of a ratio as a fraction with a denominator of a hundred, 100.

The amount Lan's income is = $1,000

Lan's budget obtained from a similar question on the internet can be presented as follows;

Expense         [tex]{}[/tex]                     Amount ($)

Car Payment [tex]{}[/tex]                     $350

Car Insurance [tex]{}[/tex]                   $100

Fuel [tex]{}[/tex]                                   $120

Cell Phone [tex]{}[/tex]                        $80

Therefore, Lan's total budget is; $350 + $100 + $120 + $80 = $650

The amount Lan's has to save is; $1,000 - $650 = $350

The percentage of his budget he saves is therefore;

Percent savings = $350/($1,000) × 100 = 35%

Learn more on percentages here: https://brainly.com/question/24304697

#SPJ1

Mindy's pay depends on the number of boots she produced. According to the given pay scale, we can break down her pay as follows:

For the first 50 boots, Mindy earns $1.65 per boot. So, for the first 50 boots, her pay is 50 * $1.65 = $82.50.

For the next 100 boots (51-150), Mindy earns $3.30 per boot. So, for these 100 boots, her pay is 100 * $3.30 = $330.

For the next 50 boots (151-200), Mindy earns $4.95 per boot. So, for these 50 boots, her pay is 50 * $4.95 = $247.50.

In total, Mindy has produced 200 boots so far, and her pay for these boots is $82.50 + $330 + $247.50 = $660.

Now, for the remaining 192 - 200 = -8 boots (less than 200), Mindy earns $6.00 per boot. Since she hasn't produced any additional boots beyond 200, we don't need to consider this part.

Therefore, Mindy's pay for producing 192 boots is $660 (according to the breakdown above).

So, the correct answer is E. None of these.

To learn more about scale : brainly.com/question/32457165

#SPJ11

Answer:

[tex]\pi 5[/tex]

Step-by-step explanation:

Use the formula [tex]C=\pi d[/tex].

[tex]C=\pi 5[/tex]

So your answer is [tex]\pi 5[/tex].

The coordinates of the point B of vector is B ( -5 , -3 )

Given data ,

To find the coordinates of the terminal point B, we can start with the initial point of vector AB and add its components.

Initial point of AB: (-9, 8)

x-component of AB: 4

y-component of AB: -11

To find the coordinates of the terminal point B, we add the x-component and y-component to the corresponding coordinates of the initial point.

x-coordinate of B = x-coordinate of initial point + x-component of AB

x = -9 + 4

x = -5

y-coordinate of B = y-coordinate of initial point + y-component of AB

y = 8 + (-11)

y = -3

Hence , the coordinates of the terminal point B are (-5, -3)

To learn more about component form of vector click :

https://brainly.com/question/25138765

#SPJ1

The value of x is 35 degree.

We know,

The angle sum property of a quadrilateral states that the sum of the interior angles of any quadrilateral is always equal to 360 degrees.

In other words, if you add up the measures of all the interior angles of a quadrilateral, the total will always be 360 degrees.

So, applying angle sum property in Trapezium

145 + 110 + 70 + x = 360

325 + x = 360

x = 360 - 325

x = 35 degree

Thus, the value of x is 35 degree.

Learn more about Angle Sum Property here:

https://brainly.com/question/30557617

#SPJ1

Rounding to two decimal places, the relative frequency of male students who are chemistry majors is approximately 0.23.Therefore, the answer is 0.23.

To find the relative frequency of male students who are chemistry majors, we need to divide the number of male chemistry majors by the total number of male students in the sample.

According to the contingency table, there are 35 male chemistry majors.

To calculate the relative frequency, we divide the number of male chemistry majors by the total number of male students:

Relative Frequency = Number of Male Chemistry Majors / Total Number of Male Students

Relative Frequency = 35 / (35 + 34 + 38 + 42)

Relative Frequency ≈ 35 / 149

Relative Frequency ≈ 0.2349.

For such more questions on Relative frequency:

https://brainly.com/question/1094036

#SPJ11

The probability that the point chosen is inside the right triangle outlined is approximately 0.3, or 8.33%, rounded to 2 decimal places.

To find the chance that a factor chosen in the ordinary polygon is likewise in the proper triangle mentioned, we need to examine the areas of the two shapes. The location of the everyday polygon may be determined using the formulation:

Area of everyday polygon = (variety of facets × period of 1 side × apothem)/2

The region of the right triangle can be found using the system:

Area of proper triangle = (base × top)/2

The probability is then given by way of the ratio of the 2 areas:

Probability = Area of proper triangle / Area of normal polygon

However, to apply this formulation, we need to recognize some values that aren't given within the query, inclusive of the range of facets, the duration of one facet, the apothem, and the base and peak of the triangle. Without those values, we can't calculate the exact opportunity. We can most effectively estimate it by looking at the discernment and making a few assumptions.

One possible way to estimate the chance is to anticipate that the everyday polygon is a hexagon (has six aspects) and that the right triangle is 1/2 of one among its facets. Then we will approximate the length of one facet as 1 unit and the apothem as 0.866 units (the use of trigonometry). The base and height of the triangle would then be zero. 5 units and 0.866 units respectively.

Using those values, we are able to estimate the areas as follows:

Area of regular polygon ≈ (6 × 1 × 0.866)/2 ≈ 2.598 devices² Area of right triangle ≈ (0.5 × 0.866)/2 ≈ 0.2165 devices²

Probability ≈ 0.2165 / 2.598 ≈ 0.0.33

Therefore, the opportunity is approximately 0.3, or 8.33%, rounded to 2 decimal places.

Note: This is best an estimate primarily based on a few assumptions and approximations. The actual possibility might also vary depending on the actual values of the parameters worried.

To know more about probability,

https://brainly.com/question/24756209

Let's visualize the parallelogram-shaped land with sides of 240m and 160m. We know that the distance between the 240m sides is 40m. Let's denote this distance as "d".

To find the distance between the 160m sides, we can use the concept of similar triangles. The triangles formed by the sides of the parallelogram are similar. In the smaller triangle, the base is 160m, and the corresponding side in the larger triangle is 240m. Similarly, the height of the smaller triangle is "d", and the corresponding side in the larger triangle is 40m. Using the property of similar triangles, we can set up the following proportion:

160m / 240m = d / 40m

Simplifying the proportion, we get:

2/3 = d / 40m

Cross-multiplying, we have:

d = (2/3) * 40m

Calculating the value, we find:

d = 26.67m

Therefore, the distance between the 160m sides of the parallelogram-shaped land is approximately 26.67m.

Learn more about  parallelogram here: brainly.com/question/31017296

#SPJ11

Finally, we need to subtract one-half the original number, which is $\frac{x}{2}$. So the final expression is:$$\frac{x+100}{2} - \frac{x}{2} = 50$$

1. Let's call the original number x.
2. Double the number: 2x
3. Add 200: 2x + 200
4. Divide the answer by 4: (2x + 200) / 4
5. Subtract one-half the original number: ((2x + 200) / 4) - (x / 2)

Now let's simplify the expression:

((2x + 200) / 4) - (x / 2)

= (2x/4 + 200/4) - (x / 2)

= (x/2 + 50) - (x / 2)

= x/2 - x/2 + 50

= 0 + 50

So, the value of the result is 50.

To know more about final expression visit:

https://brainly.com/question/29264271

#SPJ11

The probability of choosing 3 men and 1 woman at random for a 4 person committee can be calculated using the combination formula.

We want to choose 3 men from a pool of 10 men, which can be done in 10 choose 3 ways. We also want to choose 1 woman from a pool of 6 women, which can be done in 6 choose 1 ways. The total number of ways to choose a 4 person committee from a pool of 16 people is 16 choose 4. Therefore, the probability of choosing 3 men and 1 woman at random for a 4 person committee is:

(10 choose 3) * (6 choose 1) / (16 choose 4) = 120 * 6 / 1820 = 0.3956

So, the probability of choosing 3 men and 1 woman at random for a 4 person committee is approximately 0.3956 or 39.56%. This means that if we randomly choose a 4 person committee from a pool of 10 men and 6 women, there is a 39.56% chance that the committee will consist of 3 men and 1 woman.

To know more about Probability visit :

https://brainly.com/question/32004014

#SPJ11

Answer:

C(t) = 10,500(1 + 0.07)^t

Step-by-step explanation:

Answer:

sin²θ

Step-by-step explanation:

* trig identities are sin²θ + cos²θ = 1, sin²θ = 1 - cos²θ.

tan²θ = sin²θ/cos²θ.

sec²θ = 1/cos²θ.

Now we can begin to work it out.

(sec²θ - 1) / (1 + tan²θ)

Simplify sec and tan

((1/cos²θ) - 1) / (1 + (sin²θ/cos²θ))

now multiply every term by cos²θ

((cos²θ/cos²θ) - cos²θ) / ((cos²θ + sin²θ))

= (1 - cos²θ) / 1

= 1 - cos²θ

= sin²θ

The radius of the circle is 13.

To find the radius of the circle with the center at the origin and passing through the point (-12, 5), we can use the distance formula.

The distance formula between two points (x1, y1) and (x2, y2) is given by:

Distance = √[(x2 - x1)² + (y2 - y1)²]

In this case, the center of the circle is at the origin (0, 0), and the given point is (-12, 5). Plugging these values into the distance formula, we get:

Distance = √[(-12 - 0)² + (5 - 0)²]

= √[(-12)² + 5²]

= √[144 + 25]

= √169

= 13

Know more about circle here:

https://brainly.com/question/12930236

#SPJ11

Answer:

Step-by-step explanation:

You want the values of the variables x and y, and the measure of angle Q in the given figure when ∆QPR ≅ ∆SPR.

The triangles are congruent by the ASA postulate when the angles at P are congruent and the angles at R are congruent.

  (2x +1)° = (x +18)°

  x = 17 . . . . . . . . . . . divide by °, subtract x+1

  (x +18)° = (17 +18)° = 35° . . . . the measures of the angles at P

  (8y -4)° = (4y +28)°

  4y = 32 . . . . . . . . . . . divide by °, add 4-4y

  y = 8 . . . . . . . . . divide by 4

  (4y +28)° = (32 +28)° = 60° . . . . . . the measures of the angles at R

The sum of angles in ∆QPR is 180°, so ...

  Q +35° +60° = 180°

  Q = 85° . . . . . . . . . . . subtract 95°

For x = 17 and y = 8, the triangles are congruent. m∠Q = 85°.

#95141404393

Answer:

105.6 ft

Step-by-step explanation:

1 acre = 43,560 ft²

2/3(43,560) = 29,040

x = width of the lot

Area = (275 ft)(x) = 29,040 ft²

x = 29040/275 = 105.6 ft

Answer:

[tex] {2}^{ \frac{2}{7} } \times {2}^{ \frac{2}{7} } = {2}^{ \frac{2}{7} + \frac{2}{7} } [/tex]

[tex] {2}^{ \frac{2}{7} } \times {2}^{ \frac{2}{7} } = {2}^{ \frac{4}{7} } [/tex]

If a flag pole that is 15 feet tall casts a shadow that is 22 feet long. at the same time of day, the shadow of a nearby tree is 52.3 feet long then the tree is 35.5 feet tall

To determine the height of the tree, we need to use ratios and proportions. We know that the flagpole is 15 feet tall and casts a shadow of 22 feet. Using these values, we can create a proportion:
15/22 = x/52.3
To solve for x, we can cross-multiply:
15 x 52.3 = 22 x
x = (15 x 52.3)/22
x = 35.5
Therefore, the tree is 35.5 feet tall.
In mathematics, proportions are often used to compare two quantities. In this case, we used the ratio of the height of the flagpole to the length of its shadow to create a proportion and find the height of the nearby tree. It's important to note that this calculation assumes that both the flagpole and tree are standing vertically and that the angle of the sun's rays is constant. Understanding and using proportions is a valuable skill in many areas of math and science, including geometry, physics, and engineering. By using ratios and proportions, we can compare different quantities and make calculations that help us better understand the world around us.

To know more about ratios & proportions visit :

https://brainly.com/question/14023900

#SPJ11

The equation of the circle in standard form is (x - 5)² + (y + 4)² = 36

The center of the circle is the midpoint of the diameter.

Using the midpoint formula, we can find the center as follows:

x-coordinate of center = (x-coordinate of endpoint 1 + x-coordinate of endpoint 2)/2

= (-1 + 11)/2

= 5

y-coordinate of center = (y-coordinate of endpoint 1 + y-coordinate of endpoint 2)/2

= (-4 - 4)/2

= -4

So the center of the circle is (5, -4) and the radius is half the length of the diameter:

radius = distance between endpoints of diameter/2

= √(11 - (-1))² + (-4 - (-4))²]/2

= 6

Therefore, the equation of the circle in standard form is (x - 5)² + (y + 4)² = 36

To learn more on Circles click:

https://brainly.com/question/11833983

#SPJ1

It takes 7 hours to travel 385 miles at a constant speed.

To solve this problem, we need to use the direct variation formula, which states that distance traveled is directly proportional to time spent driving. This means that if we double the time spent driving, the distance traveled will also double.

Using this formula, we can set up a proportion to find the answer. We know that the car travels 330 miles in 6 hours, so we can write:

330/6 = 385/x

Where x is the time it takes to travel 385 miles.

To solve for x, we can cross-multiply and simplify:

330x = 2310

x = 7


It's important to note that this problem assumes that the car maintains a constant speed throughout the entire trip. If the car speeds up or slows down at any point, the distance traveled and time spent driving will not follow a direct variation relationship.

To learn more about : constant speed

https://brainly.com/question/30220638

#SPJ11

Answer:

Answer: 1/7 as a decimal is 0.143

1-7-as-a-decimal

Let us understand the division method to write 1/7 as a decimal.

Explanation:

To convert any fraction to its decimal form, we just need to divide the numerator by the denominator.

Here, the fraction is 1/7 which means we need to divide 1 by 7 (1 ÷ 7)

This gives the answer as 0.14285714... which can be rounded off and written as 0.143. So, 1/7 as a decimal is 0.143

Irrespective of the methods used, the answer to 1/7 as a decimal will always remain the same.

Answer:

B. (1, -2)

Step-by-step explanation:

In order to for it to be a function, the inputs need to have only one output.

The table shows:

(-1, 2), (0, -4), (1, -2), (1, 5), (2, 0), (3, 2), (4, 9)

If a x-value is repeating it is not a function.

The slope of the line above include the following: 1/5.

In Mathematics and Geometry, the slope of any straight line can be determined by using the following mathematical equation;

Slope (m) = (Change in y-axis, Δy)/(Change in x-axis, Δx)

Slope (m) = rise/run

Slope (m) = (y₂ - y₁)/(x₂ - x₁)

By substituting the given data points into the formula for the slope of a line, we have the following;

Slope (m) = (3 - 0)/(7 + 8)

Slope (m) = (3)/(15)

Slope (m) = 1/5.

Based on the graph, the slope is the change in y-axis with respect to the x-axis and it is equal to 1/5.

Read more on slope here: brainly.com/question/3493733

#SPJ1

8 cups = 64cm

From the catalog, we know that a stack of 2 cups is 16 cm tall, and a stack of 4 cups is 20 cm tall.

To find the height of a stack of 8 cups, we can use proportionality.

Let x be the height, in cm, of a stack of 8 cups. Then, we can set up the following proportion:

2 cups / 16 cm = 8 cups / x cm

Cross-multiplying, we get:

2 cups * x cm = 16 cm * 8 cups

Simplifying, we get:

2x = 128

x = 64 cm

Therefore, the height of a stack of 8 cups is 64 cm.