Sunlight is reflected, absorbed, and transmitted by earth's atmosphere. Which are the chief constituents of the electromagnetic energy that reaches earth's surface? select the two correct answers. (1 point).

Latency lag is due to distance, processing time, quality of server ,etc

1. Distance: The physical distance that data has to travel is one of the main causes of latency. The further the data has to travel, the longer the latency will be.

2. Network Congestion: When there is too much data trying to travel through a network at the same time, it can cause delays and increase latency.

3. Number of hops: Data packets often have to pass through multiple routers and other devices before reaching their destination. Each hop adds a small amount of latency.

4. Processing time: Data packets have to be processed by various devices and networks along the way. The time taken for processing can add to the latency.

5. Quality of the network: The quality of the network also plays a role in latency, older networks and equipment may not be able to handle data as efficiently as newer technologies.

6. Interference: Interference from other devices, such as cordless phones, can disrupt the signal and increase latency.

7. Malware: Malware can slow down your computer and increase the latency.

8. Quality of the Server: the location of the server, the server's processing power, and the workload of the server can affect the latency.

These are some of the factors that can cause latency lag. In some cases, multiple factors can contribute to latency lag and it may be difficult to pinpoint the exact cause.

To know more about Latency click here:

https://brainly.com/question/28234702#

#SPJ4

Answer:

the acceleration due to gravity on earth or the value of g on earth is 9.8.

To find acceleration of a ball down a ramp you have to:

Acceleration is a condition where the object are moving in different velocity each time where the value of difference has to be positive. Basic formula for velocity is ΔV : t. The opposite of acceleration is deceleration where the first velocity is higher than the second.

Learn more about acceleration here

brainly.com/question/605631

#SPJ4

Answer Relative Atomic Mass is - 39. 99

What is Relative Mass ?

-- Relative atomic mass, also known by the deprecated synonym atomic weight, is a dimensionless physical quantity defined as the ratio of the average mass of atoms of a chemical element in a given sample to the atomic mass constant.

--  The atomic mass constant is defined as being 1/12 of the mass of a carbon-12 atom

What is Molar mass

-- The mass of  mole of a substance is called its molar mass.

What Is absolute mass ?

-- The absolute mass of an electron is, however, 9 x 10-28 gram.

-- The electron in an atom possesses a certain amount of energy to maintain its distance from the oppositely charged nucleus.

--  Without this energy, the electron would collapse into the nucleus.

Learn more about Bohr model from https://brainly.in/question/5300694.

#SPJ4

The net force required to maintain a particle in a circle route is F = m (v2/R), where v2/R is the velocity of an item moving uniformly in a circle.

To do this, multiply the vector's magnitude by its angle's cosine or sine to find the linear acceleration and its magnitude by its angle's sine or cosine to obtain the vertical component.

A verticals line is defined as a line that really is perpendicular towards the x-axis of cartesian coordinate system and has the equation y = b, where b is a constant. a line that is perpendicular to a y-axis and with the equation x = a, where 'b' is a constant.

To know more about velocity visit :

https://brainly.com/question/18084516

#SPJ4

Physicists use the term "magnitude" to refer to the "distance or quantity" of anything. In the context of motion, it represents the direction and/or scale of such motion.

It's a great way to emphasize how large or extensive something is. Magnitude is a physics term for either distance or quantity. We can establish a relationship between the size and velocity of a moving object and its overall magnitude. Magnitude refers to how big something is or how much money there is. Magnitude can serve a variety of purposes. Some examples are the size of an earthquake or the charge on an electron. force, displacement, and acceleration can all be measured in terms of their respective magnitudes.

To learn more about magnitude, click here:

https://brainly.com/question/2596740

#SPJ4

Work done when a 100 lb rock is lifted to height of 3 ft is 9652.215 ft-lb.

The work done on an object is equal to the force applied to it multiplied by the distance over which the force is applied. In this case, the force applied is the weight of the rock, which is equal to the force of gravity acting on it.

The weight of an object is given by the formula:

W = mg

Where m is the mass of the object (in this case, 100 lb) and g is the acceleration due to gravity (approximately 9.8 m/s^2 or 32.17405 ft/s^2).

So the weight of the rock is:

W = (100 lb)(32.17405 ft/s^2) = 3,217.405 ft-lb

The work done on the rock is equal to the force applied (its weight) multiplied by the distance it is lifted (3 ft), so the work done is:

Work = (3,217.405 ft-lb) x (3 ft) = 9652.215 ft-lb

Therefore, the work done when a 100 lb rock is lifted to a height of 3 ft is 9652.215 ft-lb.

To know more about work done, refer

https://brainly.com/question/8119756

#SPJ4

As the height of the hole increases, the velocity of the stream increases, results in a higher distance from the beaker. Therefore, the distance of the stream from the hole Y will be less than that from X thus, less than 5 cm is correct.

The speed of stream can be determined using the height and acceleration due to gravity g. We can use the equation for velocity using the parameters g and h.

v = √2gh

Therefore, as the height h increases, v increases.

Similarly the distance s = vt

therefore, the distance increases with v.

Here, the hole x is above the hole Y. Then the stream from X will have the greater speed and it covers greater distance (5 cm )from the beaker. Stream from Y slow compared to that in X hence covers a distance less than 5 cm. Hence, option 2 is correct.

Find more on stream speed:

https://brainly.com/question/24166543

#SPJ1

By moving processing and data storage closer to the edge of the network, where the data is created and utilized, edge computing increases application performance.

How edge computing improves the performance of applications:

Applications become quicker and more responsive as a consequence of first reducing the latency and bandwidth problems related to transmitting data to and from centralized data centers or cloud servers.

Edge computing lowers latency by reducing the quantity of data that has to be transferred over the network by processing data close to the edge of the network. This is because data can be processed and evaluated more quickly and locally rather than having to travel as far.

Applications are more dependable and robust when they can operate offline or with restricted connection thanks to edge computing. This is due to the possibility of local data storage and processing, as opposed to depending on a network connection to a centralized data center or cloud server.

Additionally, edge computing enables real-time data processing, which is crucial for applications like autonomous cars, industrial automation, and IoT that call for quick answers.

To summarize, edge computing brings processing and data storage closer to the edge of the network, where data is created and utilized, improving application performance by lowering latency and bandwidth constraints. Applications become quicker and more responsive, more dependable and robust, and process data in real time as a consequence.

Learn more about edge computing here:

https://brainly.com/question/23858023

#SPJ4

The increase in internal energy will be 1760.42 J.

To learn more about kinetic energy refers to:

brainly.com/question/20658056

#SPJ1

Levers come in three varieties.First-rate lever with the fulcrum situated between the exertion and the load.The load lies midway between both the pivot and the effort of a second-class lever.

Third-class lever: the effort is distributed evenly between the load and the fulcrum.

First-order levers are devices with the fulcrum situated halfway between the input and output forces. Imagine a see-saw. In this instance, the distances of the input and output forces from the fulcrum are equal .

The most prevalent form of lever in the body is the velocity lever (third class). The bicep curl is an illustration of a 3rd leverage system in the body. The biceps brachi has a short force arm because its insertion is near to the axis of the joint.

to know more about lever visit:

https://brainly.com/question/19732425

#SPJ4

At a distance of 0.640 d, the 61.1 kg mass feels a net force of zero, with the exception of infinitely distant objects, leaving a mixed distance between the 212 kg and 673 kg masses.

A essential quality of a body is its mass. It was widely believed to be connected to the volume of matter in a physical body before to the atom's discovery and the development of particle physics. It was found that different atoms and elementary particles, although if they theoretically have the same amount of substance, have distinct masses. A distance between two points or things can be measured quantitatively or sporadically qualitatively. either scientifically or generally

R = D * ((M2)^1/2)/[tex]\sqrt{M1} +\sqrt{M2}[/tex]

R = d * [tex](\sqrt{673})/\sqrt{212}+\sqrt{673}[/tex]

r = 0.640d

Learn more about mass here

https://brainly.com/question/18064917

#SPJ4

A change in the magnetic field surrounding the conductor induces a voltage in the conductor, this induced voltage is known as Self-Inductance.

In order to cause a current to flow as a result of a shifting magnetic field, a process known as electromagnetic induction must be used.

A current will be induced in a coil of wire if the coil is placed in a magnetic field that is changing. Since there is an electric field causing the charges to be forced around the wire, current is flowing as a result. Since the charges are initially stationary, it cannot be the magnetic force.

To know more about magnetic field visit:

https://brainly.com/question/23096032

#SPJ4

Perform genetic screening step is a physician most likely to take first with a patient who has family history of obesity.

Genetic testing is helpful in many medical specialties and may alter the treatment you or a member of your family receives. Genetic testing, for instance, can diagnose a genetic disorder like fragile X-syndrome or reveal your risk of contracting cancer. Genetic testing come in a wide variety of forms. the process of screening people in a population to find out who is more likely to have or develop a certain genetic condition or to carry a genetic variation for that disorder. Sickle cell disease, Tay-Sachs disease, duchenne muscular dystrophy, haemophilia, Huntington's disease, and neurofibromatosis are a few conditions that may be screened for genetically.

To know more about obesity refer to:

https://brainly.com/question/3827878

#SPJ4

The complete question is as follows:

Which step is a physician most likely to take first with a patient who has a family history of obesity?

A. Perform blood tests

B. Perform genetic screening

C. Give diet recommendations

D. Perform surgery

To determine the average velocity in meters/second, we need to convert the distance from miles to meters and the time from minutes to seconds.

To convert miles to meters, we multiply by 1609.34.

To convert minutes to seconds, we multiply by 60.

So, distance = 25 miles * 1609.34 meters/mile = 40233.5 meters

time = 25 minutes * 60 seconds/minute = 1500 seconds

Average velocity = distance / time = 40233.5 meters / 1500 seconds = 26.856 meters/second

To determine the average velocity, we need to calculate the total distance traveled and divide it by the total time taken.

Distance = 35 meters + 45 meters + 65 meters = 145 meters

Time = 85 seconds

Average velocity = distance / time = 145 meters / 85 seconds = 1.71 meters/second

To determine the average speed, we just need to calculate the total distance traveled / total time taken.

Average speed = distance / time = 145 meters / 85 seconds = 1.71 meters/second

To determine the distance traveled, we need to add the distance traveled in each direction: 75 kilometers + 25 kilometers + 75 kilometers = 175 kilometers.

To determine the displacement, we need to calculate the final position of the car relative to its initial position. Displacement is a vector quantity, so it takes into account the direction of the motion. The car traveled north 75 kilometers, then west 25 kilometers, then south 75 kilometers. So, the final position of the car is 25 kilometers west of its initial position. Therefore, the displacement of the car is 25 kilometers west.

Answer:

Physics problem solutions

1 To determine the average velocity of the car, you will need to divide the distance traveled (in meters) by the time it took to travel that distance (in seconds).

First, you will need to convert the distance from miles to meters.

1 mile = 1609.344 meters

So 25 miles = 40,233.6 meters

Then, you will need to convert the time from minutes to seconds.

1 minute = 60 seconds

So 25 minutes = 1500 seconds

Average velocity = distance traveled / time = 40,233.6 meters / 1500 seconds = 26.822 m/s

2 To determine the average velocity and average speed, you will need to divide the distance traveled (in meters) by the time it took to travel that distance (in seconds).

Distance traveled: 35 meters + 45 meters + 65 meters = 145 meters

Average velocity = distance traveled / time = 145 meters / 85 seconds = 1.71 m/s

Average speed = total distance / total time = (35 + 45 + 65) / 85 = 2.71 m/s

3 To determine the distance the car travelled, you will need to add up the distance traveled in each direction.

Distance traveled = 75 km + 25 km + 75 km = 175 km

To determine the displacement of the car, you will need to find the straight-line distance and direction from the starting point to the ending point.

Displacement = sqrt(75km^2 + 75km^2) = sqrt(5625 + 5625) = sqrt(11250) = 105.8 km, this is the north-south distance,

It's important to notice that the displacement is a vector quantity that has a magnitude and direction, and displacement is not the same as distance.

An application is defined by an AngularJS module. The module is a container for the various components of an application. The module serves as a home for the application controllers. Controllers are always associated with a module.

An application is defined by an AngularJS module. A module is a container for the various components of an application. The module houses the application controllers. Controllers are always associated with a module. In AngularJS, a Controller is specified via a JavaScript constructor function, which is used to expand the AngularJS Scope. Controllers can be linked to the DOM in several ways. Controllers are often used in AngularJS applications to govern the flow of data. In essence, it handles data in AngularJS apps, and the controller is a Javascript object constructed with a typical JavaScript object constructor.

Here,

An AngularJS module defines an application. A module is a container for an application's various components. The application controllers are housed in the module. Controllers are always linked to a module.

To know more about angular controller,

https://brainly.com/question/3336752

#SPJ4

The deceleration of Laura is obtained as - 5m/s^2.

We know that the deceleration would have to be the rate of the decrease in the speed of the object with time. We would use the formula for the acceleration to be able to obtain the deceleration of the object as follows;

a = v - u/t

a = deceleration

v = final velocity

u = initial velocity

t = time taken

Then;

a = 0 - 15/3

a = - 5m/s^2

Thus she would have a deceleration of - 5m/s^2 from the calculation that we have done above.

Learn more about deceleration:https://brainly.com/question/4403243

#SPJ1

Force multiplied by distance is nothing but work done. It can also be described as work done is the dot product of force and distance.

A force is a quantity which is a vector because it has both a magnitude and a direction. According to Newton's laws, the force acting on an item is what causes it to move or cease moving.  

Force multiplied by distance equals work. Work is a form of energy that is expended as an object moves along certain distance. However, note that this particular formulation:

W = F d

The above equation works only if force is constant and if the movement is entirely linear on a flat surface. General formula for determining work can be done through calculus as:

W = ∫ F ds

where the distance becomes differential from d to ds, and allows us to evaluate the work done even for non-linear paths or on paths that are inclined at angles above the horizontal plane.

To know more about distance:

https://brainly.com/question/8693401

#SPJ4

Two parallel forces that are equal in strength, sense-opposite, and do not share an action path make comprise a couple force. Only rotation is produced; there is no translation. A couple's resulting force is zero.

Two parallel forces may be moving in the same direction or in opposition to one another. Two forces combine when they move in the same direction. Balanced forces are two equal forces acting in opposition to one another. Couple: A couple is a pair of opposing, parallel, equal forces that have lines of action that are parallel to one another and act in different directions. When two forces engage in opposition to one another, the lesser force is subtracted from the larger force to form the combined force. The direction of the larger original force is the direction of the generated force (resultant).

To know more about couple force, visit: https://brainly.com/question/26491162

#SPJ4

A) water medium is usually used for determining the refractive index.

In physics, refraction is the direction change brought on by a wave's speed change as it travels through a medium. For instance, waves move more quickly in deep water than they do in shallow.

The most often investigated characteristic in the forensic analysis of glass pieces is refractive index since it is easily evaluated on the minuscule shards typically found in casework.

Glass is the ideal real-world illustration of light refraction. A glass jar will make an object appear smaller and a little elevated when viewed through it. The text on a piece of paper or a document will appear closer to the surface if a slab of glass is placed over it due to the different angle the light is bending at.

To know more about refraction visit

brainly.com/question/14760207

#SPJ1

The complete question is:

Forensic scientists immerse glass evidence into a medium to determine its refractive index. Which medium is usually used for determining the

refractive index?

A. water

B. Air

C. Gel

D. Oil

Yes, more bandwidth reduce latency.

Bandwidth reduces latency because there is a wider pipeline through which more data passes, reducing the chance of data packets being delayed. On the other hand, high latency can create bottlenecks and reduce effective bandwidth, at least until the delayed data packets get through.

Maximum amount of data sent over an Internet connection in a given period of time. Bandwidth is often confused with internet speed. It is actually the amount of information that can be transmitted over a connection in a given amount of time, calculated in megabits per second (Mbps) or wireless communication links for transmitting data over network connections. The period specified for the transfer. Bandwidth is usually expressed in the number of bits, kilobits, megabits, or gigabits that can be transmitted per second.

To know more Bandwidth click here:

https://brainly.com/question/13440320#

#SPJ4

To find the perpendicular components of the force, we need to use the trigonometric functions sine and cosine.

The horizontal component of the force is given by Fx = F * cos(theta), where F is the force applied, and theta is the angle between the force and the horizontal axis.

The vertical component of the force is given by Fy = F * sin(theta)

In this case, the force applied is F = 50 N and the angle is theta = 60 degrees.

So, the horizontal component of the force is:

Fx = F * cos(theta) = 50 N * cos(60) = 25 N

The vertical component of the force is:

Fy = F * sin(theta) = 50 N * sin(60) = 43.3 N

Therefore, the correct answer is B. 25N, 43.3N

The boy is pulling a box with a force of 50N which makes an angle of 60 with the ground And Its perpendicular components are 25N, 43.3N

The force of 50N can be broken down into two components: the horizontal component and the vertical component.

To find the horizontal component, we use the formula:

Fx = F * cos(theta)

where F is the force (50N), theta is the angle (60 degrees), and Fx is the horizontal component.

To find the vertical component, we use the formula:

Fy = F * sin(theta)

where F is the force (50N), theta is the angle (60 degrees), and Fy is the vertical component.

Therefore, the horizontal component is:

Fx = 50N * cos(60) = 25N

And the vertical component is:

Fy = 50N * sin(60) = 43.3N

So, the answer is option B: 25N, 43.3N

Learn more about horizontal component:

https://brainly.com/question/5923576

Pluto was downgraded to a dwarf planet by the International Astronomical Union (IAU) in 2006 because it failed to meet the three requirements for the definition of a full-sized planet.

Who originally demoted Pluto?

In a decision to more narrowly define a planet on August 24, 2006, the International Astronomical Union downgraded Pluto from the ninth planet from the sun to a dwarf planet, igniting a scientific and cultural debate.

Pluto was demoted in 2006; why?

Pluto is presently regarded as a dwarf planet because, while being huge enough to have grown spherical, it lacks the power to dominate its orbit and clear the area around it.

To know more about dwarf planet visit:

brainly.com/question/2274077

#SPJ4

Answer:

2006

Explanation:

No, mass cannot exist without gravity. Gravity is a fundamental force of nature that acts on all matter, including mass. Without gravity, the mass could not exist because it is the force that holds matter together.

Gravity is a relativistic force that is described by the curvature of space-time. It is the force that binds the universe together and causes objects to move and interact with each other. Without gravity, the universe would be an empty void, devoid of all matter and energy.  

Gravity is the force that keeps objects orbiting each other and it is the force that keeps planets in their orbits around stars. Without gravity, the universe would be chaotic and unstable. The planets, stars, and galaxies that we currently observe would not exist.  

Gravity is also responsible for the formation and evolution of galaxies, stars, and planets. Without gravity, stars and planets would never form and exist.

To know more about gravity refer to the link  brainly.com/question/14874038

#SPJ4

Momentum is a measure of an object's motion.

Momentum is the product of an object's mass and velocity, and is represented by the symbol "p." In physics, momentum is considered to be a vector quantity, meaning it has both magnitude and direction.

The basic equation for momentum is p = m*v, where "m" is the object's mass and "v" is its velocity. This equation states that the momentum of an object is directly proportional to its mass and velocity. In other words, an object with a greater mass or a greater velocity will have a greater momentum.

An important concept in physics is that momentum is conserved. This means that in a closed system, the total momentum before a collision or any other interaction is the same as the total momentum after the collision. It also means that the momentum of an object or system of objects cannot be created or destroyed, it can only be transferred or exchanged.

Momentum also plays an important role in many areas of our everyday lives, for example in sports, where a player has to transfer a lot of momentum to hit a ball with a bat. It also plays a role in transportation, where vehicles have to have a certain amount of momentum to move and maintain the velocity.

In summary, momentum is a measure of an object's motion, and it is directly proportional to the mass and velocity of the object. It is a vector quantity and conserved in closed systems. It plays an important role in many areas of physics, and in our everyday lives.

To know more about momentum click here:

https://brainly.com/question/24030570#

#SPJ4

Quantum mechanics is the study of the motion of atomic or subatomic sized bodies, demonstrating the duality of waves and particles.

Quantum mechanics is the basic theory of physics that explains the physical properties of nature at the atomic and subatomic particle level. It is the basis of all quantum physics, including quantum chemistry, quantum field theory, quantum technology, and quantum information science. Applications of quantum mechanics include explaining phenomena that occur in nature and developing technologies based on quantum effects, such as integrated circuits and lasers. Quantum mechanics is also important for understanding how individual atoms are covalently attached to molecules.

Learn more about Quantum mechanics

brainly.com/question/23780112

#SPJ4

Torque is calculated using the formula, τ = r × F, where, r is the perpendicular distance, F is the force.

It is also described as the cross product of distance vector and force vector. Mathematically, τ = r × F = r F sinθ, where, θ is the angle between r and F.

For example, a force is applied to a particle free to rotate about a fixed axis. Force is shown divided into perpendicular and parallel components. Torque is pointed outward from the page and has the magnitude

τ = r F sinθ.

Newton-meters, sometimes known as N.m, are the SI units for torque. Although these units are the same as joules, torque isn't considered to be work or energy, therefore N.m should be used instead.

To know more about torque:

https://brainly.com/question/30187149

#SPJ4

There are three laws of motion described by Sir Isaac Newton. These laws describe the behavior of objects in motion and form the foundation of classical mechanics. The laws are as follows:

1. The first law states that an object at rest will remain at rest, and an object in motion will continue in motion with a constant velocity unless acted upon by an external force. This is often referred to as the law of inertia.

2. The second law states that the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass. The acceleration of an object is given by the equation F = ma, where F is the net force, m is the mass of the object, and a is the acceleration.

3. The third law states that for every action, there is an equal and opposite reaction. This means that if an object exerts a force on another object, the second object will exert an equal and opposite force on the first object.

To learn more about Newton's laws:

https://brainly.com/question/28171613

#SPJ4