Suppose f is a quadratic function that has roots at x = − 2 and x = 8 , and f ( 0 ) = 16. We will write a function formula for f. Sketch a garph of f based on information you are given

The alternative hypothesis for this scenario is option E) OH3 > M, which suggests that the mean list price of three bedroom homes is greater than the mean list price of four bedroom homes.

What is the mean and standard deviation?

The standard deviation is a summary measure of the differences of each observation from the mean. If the differences themselves were added up, the positive would exactly balance the negative and so their sum would be zero. Consequently, the squares of the differences are added.

Based on the question, the alternative hypothesis would be one of the following:

d) μ3 < μ4 (i.e., the mean list price of a three bedroom home is less than the mean list price of a four bedroom home)

or

e) μ3 > μ4 (i.e., the mean list price of a three bedroom home is greater than the mean list price of a four bedroom home)

Which alternative hypothesis to choose depends on the research question and the context of the problem.

Hence, The alternative hypothesis for this scenario is option E) OH3 > M, which suggests that the mean list price of three bedroom homes is greater than the mean list price of four bedroom homes.

To learn more about the mean and standard deviation visit:

brainly.com/question/475676

#SPJ4

The largest number of fence post that can possibly be cut from the log is 23.8( nearest tenth)

A word problem in math is a math question written as one sentence or more. This statements are interpreted into mathematical equation or expression.

For us to know the number of fence post that can be obtained from the log, we need to convert the length of the log into cm

Therefore;

1m = 100cm

16m = 16× 100 = 1600 cm

Therefore the maximum number of fence post that can be obtained is

1600/70 = 160/7

= 23.8 ( nearest tenth)

learn more about word problem from

https://brainly.com/question/21405634

#SPJ1

The correct equation that represents the factorial function is:

n! = n(n-1)(n-2)...(2)(1)

What is binomial?

Binomial refers to a type of probability distribution that describes the number of successes in a fixed number of independent trials, where each trial has only two possible outcomes (success or failure) and the probability of success is constant across all trials.

This equation means that the factorial of a number n is equal to the product of all positive integers from 1 to n, inclusive. For example, 5! = 5 x 4 x 3 x 2 x 1 = 120.

Note that the ellipsis (...) in the equation denotes that the sequence continues until the factor 1 is reached.

Therefore, The correct equation that represents the factorial function is:

n! = n(n-1)(n-2)...(2)(1).

To learn more binomials from the given link:

https://brainly.com/question/12932568

#SPJ4

a. The z-score is approximately 0.43.

Draw the Normal curve and shade the area to the left of the z-score.

b. The corresponding z-score is approximately -1.10.

Draw the Normal curve and shade the area to the left of the z-score.

A standard Normal distribution means that we have a bell-shaped curve with a mean of 0 and a standard deviation of 1. A Normal curve, we can use a graphing calculator or a standard Normal distribution table.
a. The z-score that gives a left area of 0.6768, we need to look up the value in the Standard Normal distribution table. A printed table or an online calculator to find that the z-score is approximately 0.43.

Draw the Normal curve and shade the area to the left of the z-score.
b. To find the z-score that gives a left area of 0.1332, we can again use the Standard Normal distribution table.

This time, we look up the area that corresponds to 0.1332 and find that the closest value is 0.1335.

The corresponding z-score is approximately -1.10.

We can then draw the Normal curve and shade the area to the left of the z-score.
To draw a well-labeled Normal curve for each part, we first need to find the corresponding z-score using a Standard Normal distribution table.

The z-score to shade the area to the left of the curve and label the mean and standard deviation on the x-axis.

Drawing the Normal curve helps us visualize the distribution and calculate probabilities for various events.

For similar questions on Normal Curve

https://brainly.com/question/27271372

#SPJ11

The experiment compared the fracture toughness of high-purity 18 Ni maraging steel with commercial-purity steel of the same type. For 32 high-purity specimens, the sample average toughness was X=65.5, while for 38 commercial-purity specimens, the sample average toughness was y=59.8.

The high-purity steel is more expensive, and its use for a certain application can be justified only if its fracture toughness exceeds that of commercial-purity steel by more than 5. Both toughness distributions are assumed to be normal with σ1 = 1.2 and σ2 =1.1. Using α=.001, the relevant hypotheses are tested. β is then computed for the test when μ1 – μ2 = 6.
In the experiment, the fracture toughness of high-purity 18 Ni maraging steel (X = 65.5, m = 32, σ1 = 1.2) was compared to commercial-purity steel (Y = 59.8, n = 38, σ2 = 1.1). The goal is to justify the use of high-purity steel if its toughness exceeds commercial steel by more than 5. Both toughness distributions are assumed to be normal.

a. To test the relevant hypotheses using α = .001, we perform a two-sample t-test. The null hypothesis (H0) is that the difference in means (μ1 - μ2) is less than or equal to 5, and the alternative hypothesis (H1) is that the difference is greater than 5.

b. To compute β for the test conducted in part (a) when μ1 - μ2 = 6, we need to determine the probability of a Type II error, which is the likelihood of failing to reject the null hypothesis when it is false. Calculating β requires knowledge of the sampling distributions and the specific alternative value (μ1 - μ2 = 6).

In summary, to justify the use of high-purity steel, a two-sample t-test can be conducted using the given parameters. Additionally, calculating β helps understand the likelihood of a Type II error in this hypothesis test.

Learn more about steel gauge here : brainly.com/question/29222140

#SPJ11

Answer: 4

Step-by-step explanation:

Answer:

Step-by-step explanation:

there u go

Based on the information given, we can assume that when a coin is tossed 50 times, the difference between the number of heads and the number of tails is x. Additionally, we are told that the probability function p(x) is equal to 12.

To understand this better, we need to consider the probability of getting different values of x.

For example, if we get 25 heads and 25 tails, then x is equal to 0. If we get 30 heads and 20 tails, then x is equal to 10.

If we get 20 heads and 30 tails, then x is equal to -10.

Since we are told that p(x) is equal to 12, we can assume that the probability of getting any value of x is 12%. This means that the probability of getting x = 0, x = 10, or x = -10 is all 12%.

To find out the actual number of times we can expect to get each value of x, we need to use the binomial distribution formula.

This formula takes into account the number of trials (in this case, 50 coin tosses), the probability of success (getting heads), and the value of x.

Overall, the information given tells us that we can expect to get a difference of 10 more heads than tails or 10 more tails than heads about 12% of the time when tossing a coin 50 times.

learn more about probability here :brainly.com/question/30034780

#SPJ11

The maximum number of mites in the peach orchard as 1901.

The maximum number of mites in the peach orchard, we need to find the maximum value of the function N(t) over the interval 0 < t < 100.To do this, we can take the derivative of N(t) with respect to t and set it equal to zero:

N'(t) = -3ln(0.131) + 5 = 0

Solving for t, we get:

t = (3ln(0.131))/5 ≈ 0.469

To confirm that this value corresponds to a maximum, we can take the second derivative of N(t) with respect to t:

N''(t) = -3/(tln(10)) < 0 for 0 < t < 100

We may infer that the function is concave down and that the critical point we discovered corresponds to a maximum because the second derivative is negative for every t in the interval.

Finally, we can substitute t = 0.469 back into N(t) to find the maximum number of mites:

N(0.469) ≈ 1901

Rounding to the nearest whole number, we get the maximum number of mites in the peach orchard as 1901

To know more about peach orchard

https://brainly.com/question/29667039

#SPJ4

The new length of the string is 13.25 feet.

Ed needed to extend the string on his kite. The current string was eight and three fourths feet.

He cut a piece of string that measured 4.5 feet and added it to the existing string.

Therefore, the new length of the string can be calculated as follows:

current string length = 8 3 / 4 = 35 / 4 feet

string added = 4.5 feet

Hence,

new length of the string = 8.75 + 4.5

new length of the string = 13.25 feet

learn more on length here: https://brainly.com/question/28634009

#SPJ1

A Z-score (z-mult) for a 70% confidence interval can be found using a standard normal distribution table or a calculator.

For a 70% confidence interval, the Z-score is approximately 1.04. This means that the interval will capture the true population mean 70% of the time within 1.04 standard deviations from the sample mean.

The mean of your estimate plus and minus the range of that estimate constitutes a confidence interval. Within a certain level of confidence, this is the range of values you anticipate your estimate to fall within if you repeat your test.

In statistics, confidence is another word for probability. If you create a confidence interval, for instance, with a 95% level of confidence, you can be sure that 95 out of 100 times, the estimate will fall between the upper and lower values indicated by the confidence interval.

Visit here to learn more about confidence interval  : https://brainly.com/question/29680703
#SPJ11

Answer:

freindly

Step-by-step explanation:

The values of x, y, and z in a rectangle with area 24 cm² is 3.6 cm, 6.67 cm, and 14.2 cm, use the fact that the area of a rectangle is the product of its length and width and with the Pythagorean theorem

Area = x * y = 24

Next, we can use the Pythagorean Theorem to relate x, y, and z

z² = x² + y²

We can substitute the value of y from the first equation into the second equation

z² = x² + (24/x)²

Simplifying

z² = x² + 576/x²

We can solve for x by finding the value that makes the derivative of the right-hand side of this equation equal to zero

d/dx (x² + 576/x^2) = 2x - 1152/x³ = 0

Solving for x

2x = 1152/x³

x⁴ = 576

x = 3.6 cm

Now that we know x, we can find y from the first equation:

y = 24/x = 6.67 cm

Finally, we can use the Pythagorean Theorem to find z:

z² = x²  + y²  = 14.2 cm

Therefore, the values of x, y, and z are approximately 3.6 cm, 6.67 cm, and 14.2 cm, respectively.

To know more about Pythagorean theorem:

https://brainly.com/question/14930619

#SPJ4

--The given question is incomplete, the complete question is given

" Find the values of x, y, and z in the figure "--

Attached figure shows the triangle pairs which can be mapped to each other using a single translation.

What are Transformation and Reflection?

Single or multiple changes in a geometrical shape or figure are called Geometrical Transformation.

A geometrical transformation in which a geometrical figure changes his position to his mirror image about some point or line or axis is called Reflection.

The translation is a rigid transformation that creates a congruent image as that of the original figure such that the distance between the each point of the original figure and the image is fixed and the same.

The translation mapping is given by (x,y)→(x+h,y+k), where h is the distance of the x coordinate of the each point of the original figure to the image and k is the distance of the y coordinate of each point of the original figure to the image.

In the attached figure we can see that the distance between each point of ΔCED is equal to the distance between each point of ΔMPN. Thus it shows the triangle pairs which can be mapped to each other using a single translation.

Attached figure shows the triangle pairs which can be mapped to each other using a single translation.

To learn more about Geometric Transformation visit:

brainly.com/question/24394842

#SPJ4

Complete Question:

'Which of these triangle pairs can be mapped to each other using a single translation? pls help need it fast '

B. Translation and C. Rotation are the transformations that can be used to justify that the squares are congruent.

The translation is a rigid transformation that preserves distance and orientation, so if we translate one square to overlap with the other square, the two squares will be congruent.

Rotation is also a rigid transformation that preserves distance and orientation. By rotating one square around the shared side until it matches the orientation of the other square, the two squares will be congruent.

Reflection and dilation do not preserve orientation, so they cannot be used to show that the squares are congruent. And rotating and then dilating would change the size of one of the squares, so this transformation cannot be used to show that the squares are congruent.

Learn more about transformations:

https://brainly.com/question/1548871

#SPJ4

Here are the amounts of weight change (in pounds) for the 12 women:

-1, -3, -8, 7.

What is statistics?

Statistics is a branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of numerical data.

The list represents the amount of weight change (in pounds) for 12 women during their first year of work after graduating from college. The values in the list can be positive or negative. A positive value indicates that a woman gained weight during the year, while a negative value indicates that she lost weight.

Looking at the list, we can see that the first three women lost weight, with weight changes of -1, -3, and -8 pounds respectively. The fourth woman gained weight, with a weight change of 7 pounds, and the fifth woman gained even more weight, with a weight change of 15 pounds.

The sixth woman also gained weight, but only by 3 pounds. The next woman on the list lost weight, with a weight change of -11 pounds, and the following woman lost weight as well, with a weight change of -6 pounds.

The last four women on the list all gained weight. The eighth woman gained 12 pounds, the ninth woman did not experience any weight change, the tenth woman lost 4 pounds, and the final woman on the list lost 11 pounds.

Therefore, Here are the amounts of weight change (in pounds) for the 12 women:-1, -3, -8, 7.

Learn more about weight here,

https://brainly.com/question/31582508

#SPJ4

Correct question is " Listed below are the amounts of weight change (in pounds) for 12 women during their first year of work after graduating from college. Positive values correspond to women who gained weight, and negative values correspond to women who lost weight -1 -3 -8 7 15 3 -11 -6 12 0 -4 -11

Find the amounts of weight change (in pounds) for the 12 women?"

Answer: 32ft

Step-by-step explanation:

In order to find the perimeter of a rectangle, you need to add up all the edges.

12+12+4+4=32

The mathematical terms that are originated from the Arabic mathematician, al-Khwarizmi are algebra, root, and fraction (option a, c and f)

Algebra is one of the most prominent mathematical terms that originated from the work of al-Khwarizmi. The term "algebra" comes from the Arabic word "al-jabr," which means "reunion of broken parts." In his book "Kitab al-Jabr wa al-Muqabala," al-Khwarizmi introduced the concept of balancing equations and solving for unknown variables. This concept forms the basis of algebra as we know it today.

The concept of fractions is also attributed to al-Khwarizmi. In his book "Kitab al-Jam'a wal-tafriq bi-ḥisab al-Hind," he introduced the concept of breaking down quantities into smaller parts. This concept forms the basis of fractions, which are essential in mathematics and everyday life.

Lastly, the term "root" also has its origins in al-Khwarizmi's work. In his book "Kitab al-Jabr wa al-Muqabala," he introduced the concept of finding the square root of a number. This concept forms the basis of the square root function in mathematics.

Hence the options (a), (c), and (f).

To know more about mathematician here

https://brainly.com/question/30613154

#SPJ4

Complete Question:

Which mathematical terms originated from the Arabic mathematician, al-Khwarizmi?

Check all that apply.

A) algebra

B) decimal

C) fraction

D) perfect square

E) remainder

F) root

To find the cost of one bottle of water, we need to divide the total cost of the case by the number of bottles in the case, which is 24.

So,

Cost of one bottle of water = Total cost of case / Number of bottles in case

= $2.99 / 24

= $0.1246

Rounding this to two decimal places, we get:

Cost of one bottle of water = $0.12

Therefore, one bottle of water costs $0.12.

Learn more about Cost here:- brainly.com/question/29509552

#SPJ11

The domain is all non negative real numbers [0, +∞).

The range of the function is all real numbers ≥ 1.3.

h(t) = 1.3 + 0.01t

models the height of the rock formation after t years.

t ≥ 0 since rock formation grows over time

The domain is all non negative real numbers [0, +∞).

At t = 0, the height of the rock formation =

h(0) = 1.3 + 0.01(0)

= 1.3 meters.

The range of the function is all real numbers ≥ 1.3.

In interval notation, the range is [1.3, +∞).

Read more on domain and range here:

https://brainly.com/question/26098895

#SPJ4

A scientist discovered a rock formation that grows at a rate of 0. 01 meters per year. To predict the height, h, of the rock formation after t years, she used the formula h(t)=1. 3+0. 01t

what is the domain and the range if the function

Theorem 5.5B is a helpful theorem that relates the measures of angles in a triangle to the lengths of the sides opposite those angles. Specifically, it states that if one angle in a triangle has a greater measure than another angle, then the side opposite the angle with the greater measure will be longer than the side opposite the angle with the smaller measure.

This theorem can be useful in a variety of situations, such as when solving for unknown side lengths or angles in a triangle.

To understand why this theorem works, it can be helpful to think about the relationship between the measures of angles and the lengths of sides in a triangle. For example, we know that in any triangle, the sum of the measures of the three angles is always 180 degrees. We also know that the length of one side of a triangle is related to the measures of the angles opposite that side, according to the Law of Sines or the Law of Cosines.

Using these relationships, we can see why Theorem 5.5B makes sense. If one angle in a triangle is larger than another angle, then the remaining angle must be smaller to ensure that the sum of the angles adds up to 180 degrees. This means that the side opposite the larger angle must be longer than the side opposite the smaller angle, since the length of a side is related to the measure of the angle opposite that side.

In summary, Theorem 5.5B provides a helpful way to relate the measures of angles and the lengths of sides in a triangle. By understanding this theorem, we can solve problems involving unknown side lengths or angles with greater ease and accuracy.

learn more about theorem here: brainly.com/question/21571509

#SPJ11

Complete statement : Two events are said to be mutually exclusive if they can not occur at the same time. Two events are said to be Independent  if the occurrence of one does not influence the probability of occurrence for the other.

What are Independent events?

Independent events are events for which the occurrence (or non-occurrence) of one event does not affect the probability of the other event occurring.

Two events are said to be mutually exclusive (or disjoint) if they cannot occur at the same time. In other words, if one event occurs, the other event cannot occur simultaneously.

For example, if we toss a coin, the events "getting a heads" and "getting a tails" are mutually exclusive. If we get a heads, we cannot get a tails at the same time.

Two events are said to be independent if the occurrence of one event does not influence the probability of occurrence of the other event. In other words, the probability of both events occurring together is equal to the product of their individual probabilities.

For example, if we roll a dice twice, the events "getting a 2 on the first roll" and "getting a 4 on the second roll" are independent. The probability of getting a 2 on the first roll is 1/6, and the probability of getting a 4 on the second roll is also 1/6. The probability of getting a 2 on the first roll and a 4 on the second roll is (1/6) x (1/6) = 1/36.

To learn more about Independent events, visit the link:

https://brainly.com/question/27665211

#SPJ4

Answer: A critical value of a function f(x) is a point x in the domain of f(x) where either the derivative is equal to zero or the derivative is undefined.

In this case, the derivative of f(x) is given by:

f'(x) = (cos^2(x))/x - 1/5

To find the critical points of f(x) on the interval (0, 10), we need to solve for x when f'(x) = 0 or f'(x) is undefined.

Setting f'(x) equal to zero, we get:

(cos^2(x))/x - 1/5 = 0

(cos^2(x))/x = 1/5

cos^2(x) = x/5

Taking the square root of both sides, we get:

cos(x) = sqrt(x/5)

This equation has solutions on the interval (0, 10) where x/5 is less than or equal to 1, since the range of the cosine function is between -1 and 1. Therefore, we can write:

0 < x/5 <= 1

0 < x <= 5

So we need to find the values of x between 0 and 5 that satisfy the equation cos(x) = sqrt(x/5).

To do this, we can graph the two functions y = cos(x) and y = sqrt(x/5) on the same set of axes and look for their intersection points between 0 and 5.

Using a graphing calculator or a software, we can see that there is only one intersection point between the two functions on the interval (0, 5). This intersection point is approximately x = 0.433.

Therefore, the function f(x) has only one critical point on the interval (0, 10), which is located at x = 0.433.

The main  Miguel's statement about rotating, reflecting, or translating a trapezoid to produce another trapezoid resulting in two similar trapezoids is correct.

However, his statement about dilating a trapezoid to produce another trapezoid resulting in two similar trapezoids is incorrect.


Similar figures have the same shape but not necessarily the same size. When a trapezoid is rotated, reflected, or translated, its angles and sides remain the same, and therefore, the resulting trapezoid is similar to the original.

On the other hand, when a trapezoid is dilated, its sides are stretched or shrunk by a scale factor, which changes the ratios of the sides and angles, making the resulting trapezoid not similar to the original.

Therefore, Miguel's statement about rotating, reflecting, or translating a trapezoid to produce another trapezoid resulting in two similar trapezoids is correct, while his statement about dilating a trapezoid to produce another trapezoid resulting in two similar trapezoids is incorrect.

To know more about trapezoids  visit:

brainly.com/question/8643562

#SPJ11

the height of the cylinder is 88 inches. By using the formula of  volume of cylinder we can find the height because volume and diameter are given.

Given the volume (V) of a cylinder is 2,200π cubic inches and the diameter of the circular base is 10 inches, we will find the height (h) of the cylinder using the formula:

V = πr²h

First, we need to determine the radius (r) of the base, which is half of the diameter:

r = diameter / 2
r = 10 inches / 2
r = 5 inches

Now, plug in the given values into the volume formula and solve for the height (h):

2,200π = π(5²)h
2,200π = π(25)h

To solve for h, divide both sides by 25π:

h = (2,200π) / (25π)

The π on both numerator and denominator cancels out:

h = 2,200 / 25
h = 88 inches

To know more about cylinder Visit:

https://brainly.com/question/16134180

#SPJ11

The solution to the equation is x = 4.

The act of deleting items from a collection is represented by subtraction. Subtraction is denoted by the minus sign.

The given equation is:

x + 6 = 10

To isolate x, we can subtract 6 from both sides of the equation:

x + 6 - 6 = 10 - 6

Simplifying, we get:

x = 4

Therefore, the solution to the equation is x = 4.

Learn more about subtraction on:

https://brainly.com/question/13378503

#SPJ4

The complete question is:

Solving for x in the equation x + 6 = 10 yields x = 4.

To find the total possible collective outcomes for the first two rounds, simply multiply the possible outcomes of each round: 2^16 * 2^8 = 2^(16+8) = 2^24 possible collective outcomes.

In the first round, there are 16 pairs playing against each other, resulting in 16 winners and 16 losers. In the second round, the 16 winners are paired up again, resulting in 8 winners and 8 losers.

So, there are a total of 16 x 8 = 128 possible collective outcomes for the first two rounds. Each outcome is determined by the combination of 16 winners and 16 losers in the first round, and then the combination of 8 winners and 8 losers in the second round.
In the first round of a knockout tournament involving 32 players, there are 16 pairs playing a game. Each pair has 2 possible outcomes: either player A wins or player B wins. So, there are 2^16 possible collective outcomes for the first round.

For the second round, there are now 16 winners, forming 8 pairs. Each pair still has 2 possible outcomes: either player A wins or player B wins. So, there are 2^8 possible collective outcomes for the second round.

To find the total possible collective outcomes for the first two rounds, simply multiply the possible outcomes of each round: 2^16 * 2^8 = 2^(16+8) = 2^24 possible collective outcomes.

Visit here to learn more about possible outcomes brainly.com/question/19567251

#SPJ11

If an exam was worth 30 points and your score was at the 60th percentile, it means that you scored better than 60% of the people who took the exam.

To calculate the exact score, we would need to know the distribution of scores and the mean score. However, if we assume that the distribution is normal, we can estimate that your score would be around 18 points (60th percentile corresponds to a z-score of 0.25, which translates to a raw score of approximately 18 points).

If an exam was worth 30 points and your score was at the 60th percentile, it means that you scored higher than 60% of the test-takers. However, without knowing the specific distribution of scores, it's not possible to determine the exact number of points you earned.

Visit here to learn more about  percentile : https://brainly.com/question/13638390
#SPJ11

Using division operation, since the family buys a pool pass every two months, Renaldo's family buys a pool pass 6 times a year.

There are 12 months in a year.

The family buys the pool pass every two months.

Using division operation, which involves the dividend (12), the divisor (2), and the quotient (6), we can determine the number of times that Renaldo's family buys a pool pass for the park district swimming pools.

12 months ÷ 2 = 6 times.

Thus, based on division operation, we can conclude that the family purchases the pool pass 6 times every year.

Learn more about division operations at https://brainly.com/question/4721701.

#SPJ1

The requried, 140% is equivalent to 7/5 as a fraction, 1 2/5 as a mixed number, and 2 as a whole number.

To write 140% as a fraction, we first recognize that "percent" means "per hundred," so 140% can be written as the fraction 140/100. We can simplify this fraction by dividing both the numerator and denominator by their greatest common factor (GCF), which is 20:

140/100 = 7/5

To write 7/5 as a mixed number, we divide the numerator by the denominator and express the result as a whole number plus a fraction. In this case:

7 ÷ 5 = 1 with a remainder of 2

So 7/5 can be written as the mixed number 1 2/5.

To write 7/5 as a whole number, we can round it to the nearest whole number. Since 7/5 is greater than 1.5 and less than 2.5, it rounds to 2.

Learn more about fractions here:

https://brainly.com/question/10708469

#SPJ1