Answer:
Maybe C
Explanation:
Let me now if it works
have a good day :)
the and cause are two mips control registers that help with page faults, tlb misses, and exceptions.
The EPC and Cause are two mips control registers that help with page faults, tlb misses, and exceptions.
The location at which processing continues after an exception has been handled is stored in the read/write register known as the Exception Program Counter (EPC). The virtual address of the instruction that directly caused the exception or the virtual address of the branch or jump instruction that came right before it are both stored in the EPC register for synchronous exceptions.
If an interrupt or exception occurs, the address of the currently running instruction is copied from the Program Counter (PC) to the Event Processing Counter (EPC). When your handler is finished, it jumps back to this address.
To learn more about Page faults click here:
brainly.com/question/29506246
#SPJ4
While en route to the scene of a shooting, the dispatcher advises you that the caller states that the perpetrator has fled the scene. You should _________ this information with law enforcement personnel at the scene.
Verify this information with the local law enforcement officers present.
What does a background check for the local police entail?Check this information with the on-site law enforcement personnel in your area.The check shows any arrests, convictions, open cases, and occasionally traffic infractions. Juvenile records that have been sealed, however, won't be evaluated.In spite of this, the police agency may request all of your past residences in order to search for any criminal histories in other states or jurisdictions.Municipal police, sheriff's departments, school district police departments, and transit police agency are examples of local law enforcement organizations.Police and sheriff departments are examples of local law enforcement organizations. The state or highway patrol is one example of a state agency. The FBI and the US Secret Service are examples of federal agencies.Municipal, county, tribal, and regional police are all considered to be local police because they are under the jurisdiction of the local government that established them.To learn more about local law enforcement refer to:
https://brainly.com/question/28173975
#SPJ4
an important disadvantage of functional programming compared to imperative programming is that group of answer choices imperative programming matches von neuman architecture better than functional programming does functional languages are never typed functional programs are usually longer than equivalent imperative programs functional programming only uses dynamic scoping
One disadvantage of functional programming compared to imperative programming is that functional languages are often less intuitive and more difficult to learn.
What is functional programming?Functional programming is a programming paradigm that emphasizes the use of pure functions and immutable data to write programs.
In functional programming, functions are first-class citizens, which means that they can be passed as arguments to other functions and can be returned as values from other functions.
This allows for the creation of higher-order functions, which are functions that operate on other functions.
To Know More About first-class, Check Out
https://brainly.com/question/21113563
#SPJ4
TRUE/FALSE a win-win, collaborative approach might be beneficial, but it isn't very realistic to use due to its detail and complicated structure.
A win-win, collaborative approach might be beneficial, but it is not very realistic to use because of its detail and complicated structure. It is a false statement.
A win-win, collaborative method is an ideal approach to use in working out problems and disagreements that are important to both parties. The win-win, collaboration process frequently results in growth in understanding, knowledge, and respect between the parties involved. The win-win, collaborative approach provides the result of mutual gains to negotiation where parties work together to meet interests and maximize value creation.
Thus, it is stated that the given statement is true in that the win-win, collaborative approach is beneficial and realistic due to its detailed structure.
You can learn more about win-win approach at
https://brainly.com/question/14234596
#SPJ4
many companies use ____ to connect two or more private networks over a public network, such as the internet.
To connect two or more private networks (like LANs) across a public network, like the internet, many businesses employ virtual private networks.
VPNs include robust security features that restrict access to the network and its sensitive corporate data to authorized users only. Data requests are routed by a router from one network to another. Incoming packets are examined by routers to identify the proper IP address for the destination before being forwarded there. Through its connection to a modem or when acting as a combined modem-router, a router can also provide internet access. A router is a piece of equipment that joins two or more networks.
Learn more about security here-
https://brainly.com/question/5042768
#SPJ4
g to prepare in advance, you should set up a framework for analysis in an excel spreadsheet to compare the tax effect of the different business entity types: c corporation, partnership, and s corporation. ultimately you should expect the owners to ask for your recommendation on choice of a business entity and the tax effects of the formation, operations, and distributions.
Choosing between the different business entity options is one of the most common questions entrepreneurs face. In this article, Total Finance Expert Scott Hoover lays out a useful guide to help entrepreneurs think through the menu of options they face.
What is S corporation?A closely held corporation (or, in some situations, an LLC or a partnership) that makes a lawful election to be taxed under Subchapter S of Chapter 1 of the Internal Revenue Code is known as a S corporation for purposes of US federal income tax. S corporations typically don't pay any income taxes. Instead, the firm divides its profits and losses among its owners and passes those along to them. The income or loss must subsequently be disclosed by the shareholders on their individual income tax forms. For the purpose of federal taxation, S corporations are regular business entities that choose to pass through corporate income, losses, deductions, and credits to their shareholders.
To know more about s corporation visit:
https://brainly.com/question/29766608
#SPJ4
what characteristics are used to assess the severity of found vulnerabilities? select all that apply.
Answer: you didn’t post the options
Explanation:
8.19 LAB: Contact list
A contact list is a place where you can store a specific contact with other associated information such as a phone number, email address, birthday, etc. Write a program that first takes in word pairs that consist of a name and a phone number (both strings), separated by a comma. That list is followed by a name, and your program should output the phone number associated with that name. Assume the search name is always in the list.
Ex: If the input is:
Joe,123-5432 Linda,983-4123 Frank,867-5309
Frank
the output is:
867-5309
Multiple values can be stored in a single variable by using lists.
Program:allContacts = input()
contactName = input()
splitContact = allContacts.split(" ")
for i in range(len(splitContact)):
if(splitContact[i] == contactName):
print(splitContact[i+1])
What is Lists?Multiple elements can be kept in a single variable by using lists.One of the four built-in data types in Python for storing data collections is the list; the other three are the tuple, set, and dictionary, each of which has a unique purpose.List items can have duplicate values and are ordered and editable.The first item in a list has the index [0], the second item has the index [1], etc.The list is modifiable, which means that after it has been generated, we can edit, add, and remove entries from it.The len() method can be used to count the number of elements in a listLists can contain items with the same value since they are indexedTo learn more about Lists refer to:
https://brainly.com/question/560095
#SPJ4
suppose s is a sequence of n values, each equal to 0 or 1. how long will it take to sort s with the merge-sort algorithm? what about quick-sort? goodrich, michael t.. data structures and algorithms in python (p. 575). wiley higher ed. kindle edition.
Using merger sort its best , average and worst time complexity is same
So, it takes (nlogn) time. it does not depends on order of the element.
What is the algorithm for merge sorting?
The Divide and Conquer concept serves as the foundation for the sorting algorithm known as Merge Sort.
The array is initially split into two equal halves in this procedure, and the two halves are then combined in a sorted way.
What is the benefit of merge sort?
Linked lists can be sorted using merge sort. Merge Sort is a stable sort, meaning that identical elements in an array keep their original places in relation to one another.
Merge sort's overall temporal complexity is O (nLogn). Since the worst-case scenario also results in an O runtime, it is more effective (nlogn).
Learn more about merge-sort algorithm
brainly.com/question/13152286
#SPJ4
which of the following is true regarding authors who seek to publish the same content in multiple papers? Using the same content in multiple papers is deceptive if it is not properly disclosed to journal editors or other relevant entities.
The truth regarding authors who seek to publish the same content in multiple papers is option D: Using the same content in multiple papers is deceptive if it is not properly disclosed to journal editors or other relevant entities.
What does releasing content mean?A brand's commercial and editorial direction is guided by a succession of actions, not simply the simple act of clicking "post" or "share." It involves determining the type and location of the content you wish to provide based on audience and customer behavior.
Therefore, one can say that Authors should not simultaneously submit the same work to multiple journals in the same language or in a different language.
Learn more about Content publishing from
https://brainly.com/question/3570160
#SPJ1
See full question below
Which of the following is true regarding authors who seek to publish the same content in multiple papers?
a) The research record is not affected by an author who publishes the same work multiple times.
b) Journal editors do not require authors to obtain permission for reusing the same content.
c) Authors are never allowed to publish the same content multiple times.
d) Using the same content in multiple papers is deceptive if it is not properly disclosed to journal editors or other relevant entities.
Which of the following ports should you disable so that they no longer respond to network requests on a Linux system due to a lack of encryption? (Choose all that apply.)Group of answer choices22802123
Ports 22, 80, and 123 should be disabled on a Linux system if they are not needed and do not have encryption enabled.
Why Ports 22, 80 and 123 should be disabled?These ports are commonly used for network services such as SSH, HTTP, and NTP, respectively, and disabling them can improve the security of the system by reducing the attack surface and limiting the potential for unauthorized access.
It is important to note, however, that disabling these ports may also prevent legitimate services from functioning, so they should only be disabled if they are not needed or if they can be replaced with encrypted alternatives.
To Know More About HTTP, Check Out
https://brainly.com/question/26465629
#SPJ1
3. Write the HTML code to create a footer that might appear at the bottom of a restaurant’s web page.
Please see the file below for the answers. Thank you.
Program Rock.java contains a skeleton for the game Rock, Paper, Scissors. Open it and save it to your directory. Add statements to the program as indicated by the comments so that the program asks the user to enter a play, generates a random play for the computer, compares them and announces the winner (and why). For example, one run of your program might look like this:
$ java Rock
Enter your play: R, P, or S
r
Computer play is S
Rock crushes scissors, you win!
Note that the user should be able to enter either upper or lower case r, p, and s. The user's play is stored as a string to make it easy to convert whatever is entered to upper case. Use a switch statement to convert the randomly generated integer for the computer's play to a string.
// ****************************************************************
// Rock.java
//
// Play Rock, Paper, Scissors with the user
//
// ****************************************************************
import java.util.Scanner;
import java.util.Random;
public class Rock
{
public static void main(String[] args)
{
String personPlay; //User's play -- "R", "P", or "S"
String computerPlay; //Computer's play -- "R", "P", or "S"
int computerInt; //Randomly generated number used to determine
//computer's play
Scanner scan = new Scanner(System.in);
Random generator = new Random();
//Get player's play -- note that this is stored as a string
//Make player's play uppercase for ease of comparison
//Generate computer's play (0,1,2)
//Translate computer's randomly generated play to string
switch (computerInt)
{
}
//Print computer's play
//See who won. Use nested ifs instead of &&.
if (personPlay.equals(computerPlay))
System.out.println("It's a tie!");
else if (personPlay.equals("R"))
if (computerPlay.equals("S"))
System.out.println("Rock crushes scissors. You win!!");
else
//... Fill in rest of code
}
}
(Game: scissor, rock, paper) (Game: scissor, rock, paper) Create a computer software to play the well-known scissor-rock-paper game.
(A rock can hit a scissor, a scissor can be sliced by a paper, and a paper may around a rock. The computer application generates a number representing scissors, rocks, and paper at random, either 0, 1, or 2. The user is asked to enter a number between 0 and 1, or 2 to draw, and the program then shows a message telling them whether they won or lost.
java.util.Scanner import;
Exercise 03 17 for public classes Scanner input = new Scanner(System.in); public static void main(String[] args); / Produce an arbitrary integer of length 0, 1, or 2 int computer = (int)(Math.random() * 3); / Request a number (0, 1) or 2 from the user. out. scissors (zero), a rock (one), and paper (two) are shown. int user = input.nextInt(); Switch System.out.print ("The computer is").
Learn more about the Java here: https://brainly.com/question/26789430
#SPJ4
if an engineer issued the copy running-config startup-config command, which cisco memory type would the configuration be copied to?
If an engineer issued the copy startup-config running-config command, a Cisco memory type which the configuration would be copied to is: B. RAM.
What are the types of computer memory?In Computer technology, there are two (2) main types of memory or storage location for software program (application) and configurations that are being used on a computer and these include the following;
Read only memory (ROM).Random access memory (RAM).What is RAM?In Computer technology, RAM is an abbreviation for random access memory and it also referred to as main memory. Random access memory (RAM) can be defined as a volatile and temporary storage (memory) location that is used for currently opened software program (application) and computer data.
In conclusion, a Cisco memory type which this configuration would be copied to is the random access memory (RAM) because they are temporary.
Read more on RAM here: brainly.com/question/13748829
#SPJ1
Complete Question:
If an engineer issued the copy startup-config running-config command, which Cisco memory type would the configuration be copied to?
Flash
RAM
ROM
NVRAM
all users at your site are using the bash shell. you want to set a variable that will apply to every user and always have the same value. which of the following shell configuration files should you place this variable in? answer .bash login /etc/profile .bash profile .bashrc
This file should contain any configurations that you want to apply to the surroundings of each system user. The /etc/bashrc file, sometimes known as the /etc/bash. bashrc file, contains configurations that are shared by all system users, as well as system-wide functions and aliases.
In bash, how can I set variables?
Using the "export" keyword, the variable name, an equal sign, and the value to be assigned to the environment variable is the simplest way to set environment variables in Bash.
How can a shell script set a variable?
With the aid of the assignment operator immediately following the variable name, we can establish variables in shell scripting with default or beginning values during the echo command. the variable's default value that we want to set,
To know more about variable visit;
https://brainly.com/question/15078630
#SPJ4
A remote access user needs to gain access to resources on the server. Which of the following processes are performed by the remote access server to control access to resources?
Authentication and authorization
A remote access server performs the following functions:
> Authentication is the process of proving identity. After devices agree on the authentication protocol to use, the login credentials are exchanged and login is allowed or denied.
> Authorization is the process of identifying the resources that a user can access over the remote access connection. Authorization is controlled through the use of network policies (remote access policies) as well as access control lists.
Accounting is an activity that tracks or logs the use of the remote access connection. Accounting is used to keep track of resource use but is not typically used to control resource use. If access is allowed or denied based on time limits, information provided by accounting might be used by authorization rules to allow or deny access.
Identification is the initial process of confirming the identity of a user requesting credentials and occurs when a users types in a user ID to log on.
Identity proofing occurs during the identification phase as the user proves that they are who they say they are in order to obtain credentials.
Remote access is the process of connecting to IT services, applications, or data from a location other than the corporate headquarters. Users can remotely connect to a network or computer through this link.
What remote access server to control access to resources?A remote user is a user who uses hardware or accesses software from a location other than the on-site location. IT professionals may also use this word to refer to anyone who accesses data utilizing a variety of virtual computing technologies.
A server assesses if a client has permission to use a resource or access a file through the authorization procedure.
Therefore, access control describes the procedure used to limit certain users' access to those resources. Always, the authorization process comes after the authentication process.
Learn more about server here:
https://brainly.com/question/7007432
#SPJ1
Put the steps in order to produce the output shown below. Assume the indenting will be correct in the program. 1 2 1 6 1 3 5 2 5 6 5 3 Line 1 Line 2 Line 3 The option "for numC in [1,5]:" (1 of 3) has been grabbed. Press tab to choose where to drop it. Drop it by pressing the spacebar key. Cancel the operation by pressing escape.
Answer:
The steps to produce the output shown below would be:
1. Write a for loop that iterates over a list of numbers, such as [1, 5]:
for numC in [1,5]:
2. Inside the for loop, print the current iteration number, followed by the string "Line" and the current iteration number, to produce output like "Line 1", "Line 2", etc.
for numC in [1,5]:
print("Line", numC)
3. Add an if statement inside the for loop that checks if the current iteration number is 1, and if so, prints the string "The option "for numC in [1,5]:" (1 of 3) has been grabbed. Press tab to choose where to drop it. Drop it by pressing the spacebar key. Cancel the operation by pressing escape."
for numC in [1,5]:
if numC == 1:
print("The option 'for numC in [1,5]:' (1 of 3) has been grabbed. Press tab to choose where to drop it. Drop it by pressing the spacebar key. Cancel the operation by pressing escape.")
print("Line", numC)
4. Add an else statement inside the for loop that prints the string "Line" and the current iteration number, to produce output like "Line 1", "Line 2", etc.
for numC in [1,5]:
if numC == 1:
print("The option 'for numC in [1,5]:' (1 of 3) has been grabbed. Press tab to choose where to drop it. Drop it by pressing the spacebar key. Cancel the operation by pressing escape.")
else:
print("Line", numC)
5. Add indentation to the for loop, the if statement, and the else statement, to match the output shown in the prompt.
for numC in [1,5]:
if numC == 1:
print("The option 'for numC in [1,5]:' (1 of 3) has been grabbed. Press tab to choose where to drop it. Drop it by pressing the spacebar key. Cancel the operation by pressing escape.")
else:
print("Line", numC)
6. Run the program to produce the output shown in the prompt.
The final program would look like this:
for numC in [1,5]:
if numC == 1:
print("The option 'for numC in [1,5]:' (1 of 3) has been grabbed. Press tab to choose where to drop it. Drop it by pressing the spacebar key. Cancel the operation by pressing escape.")
else:
print("Line", numC)
And the output would be:
The option 'for numC in [1,5]:' (1 of 3) has been grabbed. Press tab to choose where to drop it. Drop it by pressing the spacebar key. Cancel the operation by pressing escape.
Line 1
Line 2
Line 3
Which of the following protocols are often added to other protocol to provide secure transmission of data? (select two)
TLS-SSL protocols are often added to other protocol to provide secure transmission of data.
With the use of encryption, the HTTPS protocol offers safe data transmission between the server and the browser. You must use Transport Layer Security, often known as TLS, to add encryption to HTTP in order to maintain the security of information transfer. The majority of web servers support secure HTTP, or HTTPS as it is sometimes referred to. The acronym SMTP, which stands for Simple Mail Transfer System, is a widely used standard protocol for sending electronic mail. Two security standards that safeguard wireless networks are WPA (Wi-Fi Protected Access) and WPA2 (Wi-Fi Protected Access 2). The Wi-Fi Protected Access security standard, or WPA2, is now in its second iteration and is therefore more secure than WPA.
Learn more about encryption here-
https://brainly.com/question/17017885
#SPJ4
What incentive does a celebrity have to pursue a contract with a shorter term?
They think they will be more popular in the near future.
They think they will not be popular for much longer.
They think they are at the height of their popularity.
They think the company overestimate their popularity.
An incentive which a celebrity have to pursue a contract with a shorter term is that: A. They think they will be more popular in the near future.
What is a contract?In Business management, a contract can be defined as a formally written agreement between two or more parties such as a group of people, team, employees and employers, etc., which primarily gives rise to a mutual legal obligation that is enforceable by law across specific jurisdiction in the world.
Under contract law, an obligee such as a celebrity simply refers to an individual to whom a legal obligation is owed by another party as by a contract.
Generally speaking, an incentive which any celebrity have in order to pursue a contract with a shorter term (short-lived) is that they generally think they would be more popular in a particular niche the near future.
Read more on a contract here: brainly.com/question/28180355
#SPJ1
each time a function is called in a recursive solution, the system incurs overhead that is not incurred with a loop. True/False
The system incurs overhead when calling a function in a recursive solution, which is not the case when using a loop.
Explain about the loop?A loop in computer programming is a set of instructions that are repeatedly carried out until a particular condition is met. Typically, after completing a certain procedure, such as getting and modifying a piece of data, a condition, such as whether a counter has reached a specific number, is verified.
Loops are control structures that are employed to repeatedly run a particular chunk of code until a specific condition is met or for a predetermined number of times. The three primary loop types in Visual Basic are while, do, and for.. next loops.
You can run one or more lines of code repeatedly by using Visual Basic loop structures. While using a loop structure, you can keep repeating the statements until a certain condition is met.
To learn more about loop refer to:
https://brainly.com/question/19706610
#SPJ4
ou have created a spreadsheet containing information about each of your classmates. you have included each person's name, home address, phone number and age. one such record for a person would typically be contained in:
You have created each person's name , home address , phone number and age. One such record for a person would typically be in a row.
What is a row in excel sheet?Row is a one complete horizontal line in excel sheet. Each row is indicated and identifiable by a certain number value, as you can see on the left. The worksheet has rows numbered 1 through 1,048,576 that are arranged vertically (you can have a total of 1,048,576 rows in Excel). On a worksheet, the rows themselves are horizontal.
How many cells are there in a row?On a worksheet, a cell's reference, the letter of the intersecting column, and the row number all serve as identifiers for that particular cell. This cell, designated as D5, is in column D and row 5. Every cell reference starts with the column letter. Data is added inside each cell in a row. There are 16384 cells in a row.
You have created each person's name , home address , phone number and age. One such record for a person would typically be in a row.
To know more about row in excel sheet check out:
https://brainly.com/question/28435984
#SPJ4
Which of the following is NOT a best practice to protect data on your mobile computing device?
Lock your device screen when not in use and require a password to reactivate is not a best practice to protect data on your mobile computing device.
What is a mobile computing device?Any device that was built using mobile parts, such as mobile hardware and software, is referred to as a mobile computing device. Portable devices that can function like a typical computing device in terms of operation, execution, and provision of services and applications are known as mobile computing devices.
Portable and handheld computing devices are other names for mobile computing devices.
Modern handheld devices that have the hardware and software needed to run common desktop and Web applications are generally referred to as mobile computing devices. Similar hardware and software elements found in personal computers, such as processors, random memory and storage, Wi-Fi, and an operating system, are also found in mobile computing devices. They are made specifically for mobile architecture and portability, which sets them apart from PCS.
Learn more about mobile computing devices
https://brainly.com/question/8189998
#SPJ1
a user's windows based workstation is locking up frequently. it seems as though the lock ups occur when memory usage hits a certain point. you suspect one of the workstation's memory sticks is bad. which of the following will help you troubleshoot and verify that memory is bad?
A: 'Windows Memory Diagnostics' will help you troubleshoot and verify that memory is bad.
The Windows Memory Diagnostic tool is a very useful utility tool for troubleshooting when the computer begins running slowly, hangs, freezes, displays a blue screen, locks up, or reboots on its own, and can help you to detect issues with applications and software installed on the computer, whether caused by memory errors or not.
According to the scenario when a Windows-based workstation of a user is frequently locking up. It seems like frequent lock-ups occur when memory usage reaches a certain point. It is suspected by you that one of the memory sticks of the workstation is bad. In order to troubleshoot and verify that memory is bad the 'Windows Memory Diagnostics' tool will help you.
"
Complete question:
a user's windows based workstation is locking up frequently. it seems as though the lock ups occur when memory usage hits a certain point. you suspect one of the workstation's memory sticks is bad. which of the following will help you troubleshoot and verify that memory is bad?
a. Windows Memory Diagnostics
b. System Administrating Tool
c. Ctrl + Alt + Del
d. None of them
"
You can learn more about Windows Memory Diagnostics at
https://brainly.com/question/27807893
#SPJ4
project 13-1: use type declarations for the manage products application, modify the add product and update product functions in the product db.php file so they declare the types of their parameters. be sure to use strict typing. (required reading: chapters 1-6 and 13)
the addProduct and updateProduct functions declare the types of their parameters using the int, string, and float type declarations.
How to write the code?function addProduct(int $id, string $name, float $price, int $quantity) {
// Add the new product to the database
}
function updateProduct(int $id, string $name, float $price, int $quantity) {
// Update the product in the database
}
This ensures that the functions will only accept arguments of the specified types, and will throw an error if any other type of argument is passed to the function.
By using strict typing, you can ensure that the functions will always receive the correct type of data and will not have to perform any type-checking or conversion within the functions themselves.
To Know More About function, Check Out
https://brainly.com/question/16953317
#SPJ4
is the process of restoring your critical functionality and data after an enterprise-wide outage that affects more than a single system or a limited group of users.
Disaster recovery is the process of restoring your critical functionality and data after an enterprise-wide outage that affects more than a single system or a limited group of users.
What is enterprise wide risk management?
Enterprise-wide Risk Management (ERM) is a risk management concept that has evolved into an essential element of an organization's overall risk management practices. It is critical to an assessment of current and potential risks and the establishment of an organization's risk tolerance.
What is enterprise wide transformation?
Enterprise-wide transformation is driven by external triggers such as disruptive forces impacting financial, business and operating models; or internal motivations such as driving synergies and efficiencies within and between business units and aligning stakeholder interests.
To know more about Enterprise-wide visit:
https://brainly.com/question/29457059
#SPJ4
consider a relation named as book that contains data about the books in a library. book relation was initially created with the attributes bookid (an id that library assigns),
Make new Relation for every functional dependancy if the decomposed Relation doesnol Contain candidate key make a Seperate Relation for it.
Book (Title, Author, Catalog_no, Publisher, Year, Price)
Collection (Title, Author, Catalog_no)
with in the following functional dependencies:
I. Title, Author --> Catalog_no
II. Catalog_no --> Title, Author, Publisher, Year
III. Publisher, Title, Year --> Price
Assume that both schemes' keys are "Author, Title"
Because "Title Author -> Catalog no" is the only functional dependency and "Author, Title" serves as the collection's key, the table "Collection" is in BCNF.
Because Catalog no is not a key and there is a functional dependency "Catalog no -> Title Author Publisher Year," the book is not in BCNF.
Because Publisher Year is transitively dependent on the key attributes [Title, Author], the book is not in the 3NF.
Because each non-prime attribute in the table is either dependent on another non-prime attribute or on the entirety of a candidate key (Title, Author), the book is in 2NF.
Candidate keys in the table book include "Title, Author," and "Catalog no." Publisher, Year, and Prince are non-prime attributes in table Book, meaning they don't appear in any candidate keys.
Details on normal forms can be found under Database Normalization | Normal Forms.
Learn more about functional dependancy here:
https://brainly.com/question/22276156
#SPJ4
Subtract (-1110)2 from (1101) 2 with steps
When you Subtract (-1110)2 from (1101) 2 , the answer will be: (0111)2.
What is the subtraction about?To subtract (-1110)2 from (1101)2, you can use the following steps:
Convert the second number to its two's complement representation. To do this, you can invert the bits of the number and add 1.
(-1110)2 = (0001)2
(0001)2 + 1 = (0010)2
Add the two numbers using the rules of binary addition.
1 1 0 1
0 0 1 0
The outcome will be 1 0 1 1
If the result has a carry bit (an extra 1 at the leftmost side), discard it.
The result is (0111)2, which does not have a carry bit, so you can stop here.
Therefore, the result of (-1110)2 - (1101)2 is (0111)2.
Therefore, note that this process only works if the two numbers are represented in two's complement form. If the numbers are not in two's complement form, you will need to first convert them to two's complement before performing the subtraction.
Learn more about subtraction from
https://brainly.com/question/13378503
#SPJ1
What is an embedded program?
O software used to control the function of an electronic device, such as a router or a microwave
O a language used to search for desired information in a relational database management system
O an application that collects vast amounts of data from a host of websites
O tables holding data that are connected through common fields, such as an ID number
Answer:
An embedded system is a computer system—a combination of a computer processor, computer memory, and input/output peripheral devices—that has a dedicated function within a larger mechanical or electronic system.
Which of the following questions must be answered before determining what level of security a network requires? (Choose all that apply.) a. What tools are used to attack the network?
b. What's being protected?
c. From whom should data be protected?
d. How much data is on the network?
The integrity, confidentiality, and accessibility of computer networks and data are protected using a combination of software and hardware technologies, according to a set of rules and configurations.
What are the 3 elements of network security?A wide range of technologies, tools, and procedures are included under the umbrella term "network security."
In the simplest sense, it can be described as a collection of guidelines and configurations used to safeguard the accessibility, integrity, and secrecy of computer networks and data utilizing both software and hardware technologies.
Confidentiality, integrity, and availability are the three fundamental parts of the information security architecture known as the CIA triad. Each element stands for one of information security's core goals.
There are four primary categories of security: hybrid securities, which combine debt and equity, derivative securities, equity and debt securities, and equity and equity derivative securities.
Therefore, the correct options are:
b) What is being protected?
c) From whom should data be protected?
To learn more about network refer to:
https://brainly.com/question/20535662
#SPJ4
using python list comprehension, implement processing of the following text: according to statistics, there are more trees on earth than there are stars in the milky way. today, there are around 3 trillion trees and 400 billion stars. you should compute a list that contains only words that are numeric values in the above text. feel free to implement any helper functions for this exercise. at the end print the resulting list as follows: print(result)
Python is a particularly potent calculator since the Python interpreter can evaluate these expressions to obtain numerical values. Lists, tuples, and strings
Explain about the Python interpreter?A virtual machine, or piece of software that simulates a real computer, is what the Python interpreter is. This specific virtual machine is a stack machine, which means that it manipulates many stacks to carry out its tasks (as contrasted with a register machine, which writes to and reads from particular memory locations).
Python is an interpreted language, programs written in it are first translated into bytecode and then run by the Python virtual machine. Python differs from other popular compiled languages like C and C + + in that its code does not need to be produced and linked like that for these languages.
To learn more about Python interpreter refer to:
https://brainly.com/question/29584406
#SPJ4
