The form of a strategic alliance that the Managing Director of Batelco is referring to is an equity strategic alliance. Equity strategic alliance is a form of alliance where companies cooperate and create a separate entity, usually a joint venture, by investing in each other or forming a new entity. Two or more companies unite their resources and expertise to achieve mutual benefits.
Advantages of Equity Strategic Alliance1. Risk sharing: In an equity strategic alliance, all the involved companies share risks, hence each company can take on a larger project without incurring significant risks.2. Increased expertise: The equity strategic alliance creates opportunities for companies to share their knowledge, skills, and expertise in different areas of their operation. As a result, the partners can improve their operations, and performance, and achieve better results.
Disadvantages of Equity Strategic Alliance1. Complexity: Equity strategic alliances require significant time and resources to negotiate and set up.2. Partner conflict: Partner conflict can arise, especially when one partner dominates the other or when partners fail to agree on a common direction.
Learn more about equity strategic alliance-
https://brainly.com/question/29574839
#SPJ11
Because capital is subject to diminishing returns, higher saving and investment do not lead to higher:
a. growth in the long run.
b. growth in the short run.
c. income in the long run.
d. income in the short run.
Higher saving and investment do not lead to higher income in the long run due to diminishing returns.
The concept of diminishing returns suggests that as more capital is accumulated, the incremental benefits derived from additional units of capital decrease over time. In the short run, an increase in saving and investment can indeed lead to higher economic growth as more capital is available for production, resulting in increased output and income. However, in the long run, the effects of diminishing returns become prominent.
As the capital stock increases, the marginal productivity of each additional unit of capital diminishes. This means that the extra output generated by investing in additional capital becomes smaller and smaller. Eventually, a point is reached where the cost of acquiring and maintaining additional capital outweighs the incremental benefits it brings. Consequently, higher saving and investment do not lead to sustained higher income in the long run.
To achieve sustained economic growth in the long run, other factors such as technological advancements, innovation, and improvements in human capital become crucial. These factors can help overcome the limitations imposed by diminishing returns and drive sustainable increases in income and economic prosperity. Therefore, while saving and investment are important for short-term growth, their impact on long-term income growth is limited by the phenomenon of diminishing returns.
Learn more about investment here:
https://brainly.com/question/15865445
#SPJ11
berlioz’s symphonie fantastique is connected to the composer’s personal life.
The answer is true. The composer's personal life is related to Berlioz's Symphonie Fantastique.
Music historians deem Berlioz's Symphonie fantastique to be the perfect illustration of programmatic music, which is music that depicts a situation or follows a certain narrative. He made four entries for the Prix de Rome before taking home the prize. Shakespeare's plays, which served as the inspiration for three significant works, and the actress Harriet Smithson, whom he admired, pursued, and eventually married after an odd relationship, were among his most significant influences. The first movement of Symphonie Fantastique is a dream, while the second is a ball where the artist is haunted by visions of his sweetheart. The fourth movement transitions from a rural setting into a nightmare: "Convinced that his love is spurned, the artist poisons himself with opium," as Berlioz put it.
Read more about berlioz’s symphonie at
https://brainly.com/question/28273837
#SPJ4
The full question is:
berlioz’s symphonie fantastique is connected to the composer’s personal life.
True or False
What type of account is your farm mortgage?
Group of answer choices
Long-term Liability
Fixed Asset
Intermediate Liability
Current Liability
The farm mortgage is classified as a long-term liability. This categorization helps provide a comprehensive view of the farm's financial structure and obligations.
A long-term liability is a type of financial obligation that extends beyond one year from the reporting date. In contrast to current liabilities, which are due within a year, long-term liabilities represent debts or obligations that do not require immediate repayment. Farm mortgages typically fit into this category because they involve significant amounts borrowed to finance the purchase of farmland, agricultural equipment, or other substantial investments related to farming operations.
When a farm owner takes out a mortgage, they receive funds from a lender to support their farming activities. The loan is then repaid over a predetermined period, often with regular installments, such as monthly or annually, depending on the terms of the mortgage agreement. Since the repayment period is generally more extended, it is classified as a long-term liability in the farm's financial statements.
Categorizing farm mortgages as long-term liabilities is crucial for financial reporting and analysis. It allows stakeholders, such as investors, creditors, and farm managers, to assess the farm's long-term financial obligations separately from its short-term debts. It also provides insight into the farm's ability to meet its long-term financial commitments and helps assess its overall financial health and stability. By understanding the composition of long-term liabilities, farm owners can better plan for their financial future, manage cash flows effectively, and make informed decisions regarding additional borrowing or investment in farm assets.
Learn more about financial here: https://brainly.com/question/30166281
#SPJ11
A farm mortgage would typically be classified as a Long-term Liability.
A farm mortgage is a type of loan that is used to finance the purchase of a farm or agricultural property. It is a long-term financial obligation that is repaid over an extended period, usually spanning several years or even decades.
The classification of the farm mortgage as a long-term liability is based on the nature of the loan and its repayment terms. Long-term liabilities are financial obligations that are not expected to be settled within the normal operating cycle of a business, which is typically one year. Instead, they are obligations that extend beyond the current operating period.
Farm mortgages typically have repayment terms that span many years, often ranging from 10 to 30 years or more. The extended repayment period allows farmers to spread out the cost of purchasing the farm or agricultural property over time, making it more manageable for them to afford.
Learn more about Long-term Liability here:
https://brainly.com/question/30930576
#SPJ11
Program engagement and design is key to the success of any wellness initiative. Briefly describe at least 3 ways of measuring wellness program engagement. Discuss the importance of incentives to drive engagement and which you believe to be most effective and why. How should an employee wellness program and strategy evolve over time to ensure increasing and sustained engagement, which will ultimately lead to desired health outcomes?
Three ways to measure wellness program engagement are participant surveys, program utilization metrics, and health outcome data analysis. Incentives are important to drive engagement, with personalized incentives being the most effective due to their tailored approach. To ensure increasing and sustained engagement, an employee wellness program should evolve by assessing employee needs, incorporating new trends and technologies, and offering ongoing support and resources.
Measuring wellness program engagement is essential to understand the level of participation and involvement of employees. Participant surveys can provide valuable insights into employee perceptions, satisfaction, and motivation regarding the wellness program. These surveys can assess factors like program awareness, perceived benefits, and barriers to participation.
Tracking program utilization metrics helps quantify engagement by monitoring the frequency and duration of employee interactions with program components. This can include tracking the usage of wellness apps, attendance at wellness events, or participation in health screenings.
Analyzing health outcome data is another critical measure of program engagement. By assessing changes in employee health metrics like biometric screenings, health risk assessments, or claims data, organizations can determine if the wellness program is effectively improving health outcomes and reducing health risks.
Incentives play a significant role in driving engagement by providing motivation and rewards for participation. Personalized incentives, tailored to individual employee needs and preferences, tend to be the most effective. They can include financial rewards, gift cards, additional time off, or access to special perks. Personalized incentives acknowledge and address the diverse motivations and goals of employees, increasing their likelihood of engagement.
To ensure increasing and sustained engagement, an employee wellness program should evolve over time. This can be achieved by regularly assessing employee needs and preferences through surveys or focus groups. The program should adapt to incorporate new trends and technologies in the wellness industry, such as wearable devices or virtual coaching platforms. Additionally, offering ongoing support, resources, and educational opportunities can help employees maintain their engagement and continue to improve their health outcomes. Regular communication and feedback channels should be established to keep employees informed and involved in the program's evolution, fostering a sense of ownership and commitment.
Learn more about wellness program engagement here :
https://brainly.com/question/31308263
#SPJ11
An owner of real estate who engages a property manager to manage his property must receive a copy of the signed property management agreement when?
An owner of real estate who engages a property manager to manage their property must receive a copy of the signed property management agreement at the time it is signed by both parties. The owner should have a copy of the agreement for their records and to ensure clarity on the terms and responsibilities outlined in the agreement.
When an owner of real estate decides to hire a property manager to handle the management of their property, it is essential for them to receive a copy of the signed property management agreement. This agreement outlines the terms and conditions of the property management arrangement, including the responsibilities of both parties, the duration of the agreement, and any fees or compensation involved.
Receiving a copy of the signed agreement is crucial because it serves as a legal document that establishes the agreement between the owner and the property manager. It ensures that both parties are aware of their rights and obligations and helps prevent any potential misunderstandings or disputes in the future.
By having a copy of the signed property management agreement, the owner can refer to it whenever necessary to confirm the agreed-upon terms or to address any issues that may arise during the course of the property management relationship. It serves as a reference point for both parties to ensure that they are fulfilling their respective roles as outlined in the agreement.
Overall, receiving a copy of the signed property management agreement at the time it is signed provides the owner with documentation of the agreement and establishes a clear understanding of the responsibilities and expectations involved in the management of their property.
Learn more about agreement here:
https://brainly.com/question/29441269
#SPJ11
You are considering an impstment in 30-yeat bonds lasued by Moore Corporation, The bonds have no speciel covenants. The Wall Street Joumal feports that lyear Thins are currenty earning 040 percent. Your brokel has determined the following intormation about economic nctivity and Moore Corporation bonds a. What is the inflation premiurn? b. What is the fait interest rate on Moote Corporation 30 year bonds? (For all requirements, round your percentage answers to 2 decimal places. (e.9,32.16) )
To calculate the inflation premium, you need to find the difference between the nominal interest rate and the real interest rate.
The nominal interest rate is the reported interest rate of 4.0%, and the real interest rate is the inflation-adjusted interest rate. However, the question does not provide the real interest rate, so it is not possible to calculate the inflation premium without that information.
Similarly, to determine the fair interest rate on Moore Corporation's 30-year bonds, you would need more information. The question does not provide any specific information about the bond's yield or risk, which are factors that influence the fair interest rate. In summary, without additional details such as the real interest rate or specific information about the bond's yield and risk, it is not possible to calculate the inflation premium or the fair interest rate on Moore Corporation's 30-year bonds.
Know more about inflation premium:
https://brainly.com/question/32230547
#SPJ11
Akers Inc. maintains average inventory of $1,600,000 (at cost). Last year, Akers' sales volume was $16,000,000 and cost of goods sold was $8,500,000. Akers has determined that its inventory carrying cost is 18 percent annually. (1) What was the inventory turnover rate? (Round your answer to 2 decimal places.) Inventory turnover rate times (2) How much was the inventory carrying cost for the year?
The inventory carrying cost for the year is $288,000 which is obtained by multiplying the average inventory by the carrying cost rate
To calculate the inventory turnover rate, we can use the formula:
Inventory Turnover Rate = Cost of Goods Sold / Average Inventory
In this case, the Cost of Goods Sold (COGS) is given as $8,500,000 and the Average Inventory is $1,600,000.
Inventory Turnover Rate = $8,500,000 / $1,600,000 = 5.31
Rounding to two decimal places, the inventory turnover rate is 5.31.
To calculate the inventory carrying cost for the year, we can multiply the average inventory by the carrying cost rate:
Inventory Carrying Cost = Average Inventory * Carrying Cost Rate
The Average Inventory is $1,600,000 and the Carrying Cost Rate is given as 18% annually.
Inventory Carrying Cost = $1,600,000 * 0.18 = $288,000
To know more about inventory carrying cost visit
https://brainly.com/question/30583094
#SPJ11
1.1 Identify any organisation of your choosing, actual or fictitious, and perform the following tasks for the company: 1.1.1 Describe the industry the company operates in as well as the company's vision and mission. 1.1.2 Develop a comprehensive Quality Policy Document that conforms to all the criteria of a good quality policy and controlled document for the company, should a Quality Policy Document already exist then improve upon it and clearly indicate your improvements. 1.1.3 Choose three departments within the company and develop three quality objectives for each of the departments to enable the realisation of the goal/s set forth in the Quality Policy. In table form, state each quality objective in one column, how exactly said quality objective enables the realisation of the Quality Policy goal/s in the next column, and detail how each quality objective is to be measured in the third column. [53] Total Marks =[53]
ABC Manufacturing Company operates in the manufacturing industry with a vision to become a leader in producing high-quality products while promoting sustainability.
1.1.1 ABC Manufacturing Company operates in the manufacturing industry. Its vision is to become a leader in producing high-quality products that meet customer needs while promoting sustainable practices. The company's mission is to deliver innovative and reliable solutions to its customers while maintaining a commitment to quality, customer satisfaction, and continuous improvement.
1.1.2 The existing Quality Policy Document for ABC Manufacturing Company states the commitment to meet customer requirements, comply with applicable regulations, and continuously improve the effectiveness of the quality management system. To improve upon it, we can incorporate the following points:
- Emphasize the importance of employee involvement and empowerment in quality management.
- Highlight the company's commitment to environmentally sustainable practices.
- Define specific quality objectives and targets to drive continuous improvement.
- Establish a process for regularly reviewing and updating the Quality Policy Document.
1.1.3 Let's choose three departments within ABC Manufacturing Company and develop three quality objectives for each department to enable the realization of the Quality Policy goals:
Department: Production
1. Quality Objective: Reduce manufacturing defects by 20% within the next six months.
- This objective enables the realization of the Quality Policy goal of meeting customer requirements and improving product quality.
- Measurement: Track the number of defects per unit produced and conduct regular quality audits.
2. Quality Objective: Increase production efficiency by 10% through process optimization and waste reduction.
- This objective enables the realization of the Quality Policy goal of continuous improvement and sustainable practices.
- Measurement: Monitor production cycle time, waste generated, and implement lean manufacturing principles.
3. Quality Objective: Enhance employee training and development programs to improve product knowledge and skills.
- This objective enables the realization of the Quality Policy goal of employee involvement and empowerment.
- Measurement: Conduct regular training evaluations, track employee performance, and seek feedback from employees.
Department: Sales and Marketing
1. Quality Objective: Increase customer satisfaction ratings by 15% through effective communication and timely response to customer inquiries.
- This objective enables the realization of the Quality Policy goal of meeting customer requirements and satisfaction.
- Measurement: Monitor customer satisfaction surveys, track response time to inquiries, and conduct regular customer feedback sessions.
2. Quality Objective: Improve market share by 5% through targeted marketing campaigns and competitive pricing strategies.
- This objective enables the realization of the Quality Policy goal of delivering innovative and reliable solutions.
- Measurement: Monitor sales data, track market share, and analyze customer feedback on product features and pricing.
3. Quality Objective: Enhance customer relationship management processes to ensure proactive engagement and personalized support.
- This objective enables the realization of the Quality Policy goal of meeting customer requirements and satisfaction.
- Measurement: Monitor customer retention rates, conduct regular customer satisfaction surveys, and track customer feedback on service quality.
Department: Research and Development
1. Quality Objective: Increase the number of new product launches by 10% annually through efficient research and development processes.
- This objective enables the realization of the Quality Policy goal of delivering innovative solutions.
- Measurement: Track the number of new product ideas generated, monitor the progress of product development projects, and evaluate customer feedback on new products.
2. Quality Objective: Reduce product development cycle time by 20% through streamlined processes and effective cross-functional collaboration.
- This objective enables the realization of the Quality Policy goal of continuous improvement and meeting customer requirements.
- Measurement: Monitor the time taken at each stage of the product development process, conduct regular project evaluations, and track customer feedback on development speed.
3. Quality Objective: Enhance the effectiveness of the quality control system by implementing advanced testing methodologies and ensuring regulatory compliance.
- This objective enables the realization of the Quality Policy goal of meeting customer requirements and compliance.
- Measurement: Monitor the accuracy and reliability of testing results, track compliance with industry standards and regulations, and conduct regular quality control audits.
For more such questions on high-quality
https://brainly.com/question/14299982
#SPJ11
If expansionary monetary policy pushed interest rates into negative territory, then money would be a ___________________ asset that would not be saved. Such a policy would likely increase the risk of asset bubbles. depreciating
If expansionary monetary policy pushes interest rates into negative territory, money would become a depreciating asset that discourages saving.
When interest rates are pushed into negative territory, it means that the return on holding money becomes negative. In such a scenario, individuals and investors are incentivized to seek alternatives to holding money, as it would result in a loss of value over time. The negative interest rates discourage saving because individuals would prefer to invest or spend their money rather than keeping it idle.
By discouraging saving, expansionary monetary policy aims to stimulate economic activity and boost spending. However, this policy can also lead to an increased risk of asset bubbles. When interest rates are extremely low or negative, investors may turn to riskier assets such as stocks, real estate, or commodities in search of higher returns. This increased demand for these assets can drive up their prices to unsustainable levels, creating a speculative bubble that may eventually burst, resulting in financial instability.
Therefore, negative interest rates can have implications for both the behavior of money as an asset and the potential risks in the financial markets.
Learn more about financial markets here:
https://brainly.com/question/28481995
#SPJ11.
The Diversified Growth Co. Has three different divisions. Its low-risk division accounts for $5 million of its assets and has a beta of 0. 8. Its middle-risk division accounts for $10 million of its assets and has a beta of 1. 1, while its high-risk division has assets worth $15 million and a beta of 1. 8. Diversified’s overall firm beta is therefore equal to _____. (Do not round intermediate computations. )
The Diversified Growth Co. has three divisions with different risk levels and asset values. The low-risk division has $5 million in assets and a beta of 0.8, the middle-risk division has $10 million in assets and a beta of 1.1, and the high-risk division has $15 million in assets and a beta of 1.8. To determine the overall firm beta, we need to calculate the weighted average of the division betas based on their asset values.
To calculate the overall firm beta, we need to take into account the asset values and betas of each division. The formula to calculate the weighted average beta is as follows:
Overall Firm Beta = (Beta of Low-Risk Division x Asset Value of Low-Risk Division + Beta of Middle-Risk Division x Asset Value of Middle-Risk Division + Beta of High-Risk Division x Asset Value of High-Risk Division) / Total Asset Value
Using the given information, the calculation would be as follows:
Overall Firm Beta = (0.8 x $5 million + 1.1 x $10 million + 1.8 x $15 million) / ($5 million + $10 million + $15 million)
To know more about overall firm beta here: brainly.com/question/29524207
#SPJ11
Laurel Enterprises expects earrings next year of $3.52 per share and has a 50% retention rate, which is plans to keep constant. Its equity cost of capital is 9%, which is also its expected retum on new investment. Its earnings are expected to grow forever at a rate of 4.5% per year. If its next dividend is due in one year, what do you estimate the firm's current stock price to be? The ourent stack perce will be 1 (Round to the nearest cent)
Based on the given information, the estimated current stock price of Laurel Enterprises is $39.11.
Based on the given information, to estimate the current stock price of Laurel Enterprises, we can use the Gordon Growth Model, also known as the Dividend Discount Model (DDM). This model assumes that the stock price is the present value of all future dividends.
Step 1: Calculate the dividend per share expected next year. The given earnings per share is $3.52, and the retention rate is 50%. So, the dividend per share is $3.52 * (1 - 0.50) = $1.76.
Step 2: Calculate the expected dividend growth rate. The given growth rate is 4.5% per year.
Step 3: Calculate the cost of equity capital. The given equity cost of capital is 9%, which is also the expected return on new investment.
Step 4: Apply the Gordon Growth Model formula to estimate the current stock price. The formula is: Stock price = Dividend per share / (Cost of equity capital - Dividend growth rate).
Substituting the values: Stock price = $1.76 / (0.09 - 0.045).
Calculating: Stock price = $1.76 / 0.045 = $39.11 (rounded to the nearest cent).
Learn more about the retention rate: https://brainly.com/question/30100220
#SPJ11
If you have a data set that consists of the following three values 1, 2, and 3,
which of the following statements are true:
a) The sample standard deviation is equal to sample variance
b) The sample standard deviation equals the sample average.
c) The sample mean is rigid
d) The standard deviation will be the best dispersion method
e) The Range of the data is 3
The correct statements are:
a) The sample standard deviation is equal to the sample variance.
d) The standard deviation will be the best dispersion method.
e) The range of the data is 3.
The correct statements are:
a) The sample standard deviation is equal to the sample variance. This is true because the sample standard deviation is the square root of the sample variance.
d) The standard deviation will be the best dispersion method. This is true because the standard deviation provides a measure of how spread out the data points are from the mean. It takes into account the individual differences between the data points and is a commonly used measure of dispersion.
e) The range of the data is 3. This is true because the range is the difference between the maximum and minimum values in the data set. In this case, the maximum value is 3 and the minimum value is 1, so the range is 3 - 1 = 2.
The other statements (b and c) are not true:
b) The sample standard deviation does not equal the sample average. The sample standard deviation measures the dispersion or spread of the data, while the sample average (mean) is a measure of central tendency.
c) The sample mean is not rigid. The sample mean is a measure of the central location of the data points and can change if the data set is modified or new data points are added.
For more such questions on variance
https://brainly.com/question/25397585
#SPJ4
1. Below is a simplified circular-flow diagram for the economy of Micronia. (Note that there is 1. Below is a simplified circular-flow diagram for the eco a. What is the value of GDP in Micronia? b. W
The value of GDP in Micronia can be determined by summing up the total value of all goods and services produced within the country's borders during a specific time period. GDP stands for Gross Domestic Product and serves as a measure of the overall economic activity of a country.
To calculate the value of GDP, Consumption (C): This includes the spending by households on goods and services. It represents the largest component of GDP. Investment (I): This includes spending by businesses on capital goods, such as machinery and equipment, as well as residential and non-residential construction.
Government Spending (G): This includes the expenditure by the government on goods and services, such as defense, education, and infrastructure. Net Exports (NX): This represents the difference between the value of a country's exports and imports. If exports exceed imports, it contributes positively to GDP.
know more about GDP:
https://brainly.com/question/30504843
#SPJ11
Changing policies and rules within an established business require consideration and planning. Whether the changes are minor procedural changes or distinctive rules adjustments, the company should provide appropriate information or training to all staffs.
(a) Explain how the members of training interventions will be targeted. (10 MARK)
(b) Choose one training activity and identify FIVE aspects of a good training strategy.
The members of training interventions can be targeted through several methods, depending on the nature of the changes and the specific needs of the organization.
Here are some approaches to consider:
Job Roles and Responsibilities: Identify the specific job roles and responsibilities that will be affected by the policy or rule changes.
Target the training interventions towards employees who hold those positions or are directly involved in the affected processes.
Needs Assessment: Conduct a thorough needs assessment to understand the existing knowledge and skill gaps related to the changes. This can be done through surveys, interviews, focus groups, or performance evaluations.
Skill Levels: Consider the skill levels of employees and target the training interventions accordingly.
Change Champions: Identify employees who are enthusiastic about the changes and have a positive influence on their peers.
Learn more about organization here:
https://brainly.com/question/20114993
#SPJ11
In an economy, full employment output is equal to $22 billion and current output is equal to $20.4 billion. The marginal propensity to consume is equal to 0.75. Instructions: Enter a number rounded to two decimal places
a. This economy is
in a long-run equillbrlum.
not in equillbrlum.
experiencing a recessionary gap.
experiencing an inflationary gap
b. If autonomous expenditur (Click to select) $ billion, then current output would be equal to full employment output. (increases ordecreases)
a. This economy is experiencing a recessionary gap.
b. If autonomous expenditure decreases by $1.72 billion, then current output would be equal to full employment output.
In this scenario, where full employment output is $22 billion and current output is $20.4 billion, we can observe that the economy is operating below its full employment level.
The difference between full employment output and current output represents a recessionary gap. This indicates that the economy is not in equilibrium as it is producing below its potential.
To determine the change in autonomous expenditure required to achieve full employment output, we can use the concept of the expenditure multiplier. The marginal propensity to consume (MPC) represents the proportion of an increase in income that is spent on consumption. In this case, the MPC is given as 0.75.
To calculate the change in autonomous expenditure, we can use the formula:
Change in autonomous expenditure = (Recessionary gap) / (MPC)
Plugging in the values, we have:
Change in autonomous expenditure = ($22 billion - $20.4 billion) / 0.75
= $1.6 billion / 0.75
≈ $2.13 billion
Since the question asks for the change in autonomous expenditure required to reach full employment output, we need to find the decrease in autonomous expenditure. Therefore, the change in autonomous expenditure is approximately $1.72 billion (rounded to two decimal places).
By reducing autonomous expenditure by $1.72 billion, the economy would increase its output to reach full employment output of $22 billion, closing the recessionary gap.
To learn more about economy click here: brainly.com/question/18461883
#SPJ11
15. (2 points) What is Purchasing Power Parity (PPP), what does it show, and what is it used for? What are some of the criticisms and shortcomings of PPP?
Purchasing power parity (PPP) is a measure of the relative purchasing power of different currencies. It is calculated by comparing the prices of a basket of goods and services in different countries.
The basket of goods and services is typically chosen to be representative of the consumption patterns of a typical household.
PPP is used to compare the standards of living between different countries. It is also used to adjust for differences in price levels when comparing economic data between countries.
For example, if the PPP exchange rate between two countries is 1:1, then a dollar in one country will have the same purchasing power as a dollar in the other country.
There are a number of criticisms and shortcomings of PPP. One criticism is that the basket of goods and services used to calculate PPP is often not representative of the consumption patterns of all households. Another criticism is that PPP can be sensitive to changes in prices, especially for non-traded goods and services.
Despite these criticisms, PPP is a useful tool for comparing the standards of living between different countries. It is also a useful tool for adjusting for differences in price levels when comparing economic data between countries.
Here are some of the criticisms and shortcomings of PPP:
The basket of goods and services used to calculate PPP is often not representative of the consumption patterns of all households.PPP can be sensitive to changes in prices, especially for non-traded goods and services.PPP does not take into account differences in taxes and transportation costs.PPP is not a perfect measure of the standard of living, as it does not take into account factors such as access to education and healthcare.Overall, PPP is a useful tool for comparing the standards of living between different countries. However, it is important to be aware of its limitations and to use it in conjunction with other tools when making comparisons.
To learn more about PPP click here; brainly.com/question/28199500
#SPJ11
makes up the waxy outer layer that prevents water loss.
makes up the waxy outside layer that stops water evaporation. All plant species have a waxy covering on their leaves called the cuticle. Water loss from the surface of leaves is slowed down by the cuticle.
The waxy, water-repellent material called "cutin" is found in the plant's aerial parts and is in charge of shielding the underlayers by limiting water loss through transpiration. As a result, the epidermis on the outside of stems and leaves has a waxy layer composed of cutin. On the two surfaces of the leaf, the epidermis secretes a waxy covering known as the cuticle. It serves to stop water from the leaf surface from evaporating. The main defence of higher plants against unchecked water loss from leaves, fruits, and other essential sections is the cuticle.
Read more about water loss at
https://brainly.com/question/24133907
#SPJ4
The following activities are based on a current or recently completed group project that you are (were) involved in. This project may be a student project, a work project, or an extracurricular project. - How strong is the team identity on this project and why? - What could participants do to strengthen team identity? - What kind of informal activities could be used to rejuvenate the team? Why would these activities work?
Team identity can be strengthened by fostering a sense of belonging and open communication, while informal activities can rejuvenate the team by promoting social connections and providing a break from work-related stress.
Team identity refers to the shared sense of belonging and collective identity among project participants. It is influenced by factors such as shared goals, effective communication, trust, and collaboration.
To strengthen team identity, participants can focus on fostering a sense of belonging by creating an inclusive and supportive environment where everyone feels valued and heard.
Open communication is crucial, as it encourages the exchange of ideas, resolves conflicts, and builds trust among team members. Establishing shared values and a common vision helps align individuals towards a common purpose.
To further strengthen team identity, participants can engage in team-building activities. These activities can range from icebreaker exercises, team retreats, or collaborative problem-solving sessions. Informal activities, such as social gatherings or team outings, can also play a role in rejuvenating the team.
These activities provide opportunities for team members to bond, relax, and build interpersonal relationships outside of the project context. They create a positive and enjoyable atmosphere, fostering camaraderie and boosting team morale.
Hence, by focusing on fostering a sense of belonging, promoting open communication, engaging in team-building activities, and incorporating informal rejuvenation activities, participants can strengthen team identity and enhance the overall dynamics of the project.
Learn more about Team identity here:
https://brainly.com/question/32013642
#SPJ11
The trains of the Transcontinental Railway Company, when shipping goods, sometimes emit sparks that start fires along the tracks and damage the property of others. If Transcontinental does not pay for the damage it causes, what has occurred?
A. positive externality
B. negative externality
C. demand-rise externality
D. all of the above
If Transcontinental does not pay for the damage it causes, occurred is negative externality (option B).
A negative externality occurs when the actions of a party impose costs or harm on others who are not directly involved in the transaction. In this case, the sparks emitted by the trains of the Transcontinental Railway Company cause fires and damage the property of others along the tracks.
Since the company is not paying for the damages it causes, it results in a negative externality as the costs are borne by individuals or property owners who are not responsible for the emissions. The correct option is B.
To know more about Transcontinental;
https://brainly.com/question/15124415
#SPJ11
A and B form a partnership; each contributes $500. They share all profits and losses equally. AB's initial Book Basis balance sheet is as follows: Assets Liabilities & Capital Cash $1,000 Capital - A $500 Capital - B $500Initial Transaction - The partnership buys a building for $1,200, paying $300 cash and giving an $900 mortgage for the balance. AB also invested some of the cash in some stock ($200) and bonds ($200). What does AB's balance sheet look like after these transactions?
After the initial transaction, where the partnership buys a building for $1,200, pays $300 in cash, and takes a $900 mortgage for the balance, the new balance sheet for AB would be as follows:
Assets:
Cash: $1,000 - $300 = $700
Building: $1,200
Stock: $200
Bonds: $200
Liabilities & Capital:
Mortgage: $900
Capital - A: $500
Capital - B: $500
Revised Balance Sheet for AB:
Assets:
Cash: $700
Building: $1,200
Stock: $200
Bonds: $200
Liabilities & Capital:
Mortgage: $900
Capital - A: $500
Capital - B: $500
Please note that the values for cash, building, stock, and bonds have been adjusted based on the transactions, while the values for mortgage and the capital accounts remain the same.
Learn more about partnership here;
brainly.com/question/33558718
#SPJ11
Suppose that you have a job interview at a consulting company. Youe industry knowledge is 7 out of 10 and your academic linowledge is 9 aet of 10 Yoir main rrial for the pasition scores 9 for industry knowledge and 7 for acidemic knowedge. The firin will interview you, your rival and ore other candidate. According to the decoy effect. which characteristics would youlike the other candidate to have fo you want to get the joble 8 for industry knowledge and 6 for academic knowledge. 6 for industry knowiedge and 8 for ac ademic knowledse. 6 for industry knowledge and 6 for academicknowledge 8 for industry knowledge and 8 for academic knowledge.
the decoy effect would favor your rival over you in this scenario.
According to the decoy effect, if you have a job interview at a consulting company, and your industry knowledge is 7 out of 10 and your academic knowledge is 9 out of 10, and your rival's score for industry knowledge is 8 out of 10 and academic knowledge is 6 out of 10, then the decoy effect would favor your rival over the other candidate with 6 for industry knowledge and 8 for academic knowledge.
This is because the decoy effect is a phenomenon where consumers change their preference between two options when presented with a third, less attractive option.
The less attractive option is called a decoy, and it is used to make one of the other options more appealing.In this scenario, the third candidate with 6 for industry knowledge and 8 for academic knowledge acts as a decoy. His/her score is less attractive in terms of industry knowledge than your rival's score, but more attractive than yours.
Similarly, his/her score is more attractive in terms of academic knowledge than your rival's score but less attractive than yours. Therefore, the decoy effect would favor your rival over you in this scenario.
learn more about the decoy effect
https://brainly.com/question/33118411
#SPJ11
Explain the two approaches firms use to report accounting changes. A. I he two approaches are the retrospective method and the prospective method. In a retrospective change, all prior years' financial
The retrospective method restates prior years' financial statements, while the prospective method applies accounting changes only to current and future periods.
The retrospective method is used when a firm decides to change its accounting policies. Under this approach, the firm restates its prior years' financial statements as if the new accounting policy had always been in place. This means that the effects of the accounting change are applied retrospectively to all relevant prior periods. The restated financial statements allow for comparability across periods and provide a more accurate representation of the firm's financial position and performance.
On the other hand, the prospective method is used when a firm adopts a new accounting policy but does not make adjustments to prior years' financial statements. The change is applied only to the current and future periods going forward. This approach is simpler and less time-consuming than the retrospective method but may result in a lack of comparability with prior periods.
Hence, the retrospective method adjusts prior years' financial statements to reflect the accounting change, while the prospective method applies the change only to current and future periods, without restating prior years' financial statements. The choice between the two approaches depends on the nature of the accounting change and the impact it has on the firm's financial statements.
Learn more about financial statements here:
https://brainly.com/question/14951563
#SPJ11
in the circular flow model, which group purchases most of the factors of production
In the circular flow model, the group that purchases most of the factors of production is the business sector.
This sector includes firms and corporations that utilize resources such as labor, capital, and natural resources to produce goods and services.
The circular flow model depicts the flow of goods, services, and money in an economy. It consists of two main sectors: the household sector and the business sector. The household sector represents individuals and families who supply factors of production, such as labor, land, and capital, to the business sector. In return, households receive income in the form of wages, rent, interest, and profit.
On the other hand, the business sector purchases the factors of production from the household sector to produce goods and services. This sector includes various types of businesses, ranging from small enterprises to large corporations. These businesses employ labor to work with capital and other resources to produce goods and services. They also engage in purchasing raw materials, machinery, equipment, and other inputs required for production.
Therefore, it is the business sector that primarily purchases the factors of production in the circular flow model. By utilizing these factors, businesses generate income and create output, which is then distributed back to the households in the form of wages and profits. This continuous flow of production, income, and expenditure forms the basis of economic activity within the circular flow model.
Learn more about economy here:
brainly.com/question/18461883
#SPJ11
what is the most popular botanical used in cosmetic formulations?
The most popular botanical used in cosmetic formulations is Aloe vera. It is known for its soothing and hydrating effects on the skin, making it a popular ingredient in moisturizers, lotions, and other skincare products.
Botanicals are plant-derived ingredients that are commonly used in cosmetic formulations for their various beneficial properties. One of the most popular botanicals used in cosmetics is Aloe vera. Aloe vera is a succulent plant that has been used for centuries for its medicinal and skincare properties. It is known for its soothing and hydrating effects on the skin, making it a popular ingredient in moisturizers, lotions, and other skincare products.
Aloe vera contains vitamins, minerals, and antioxidants that help nourish and protect the skin. It has anti-inflammatory properties that can help calm irritated skin and promote healing. Additionally, aloe vera has moisturizing properties that can help hydrate and soften the skin.
Other popular botanicals used in cosmetics include chamomile, lavender, green tea, and rosemary. Chamomile is known for its calming and anti-inflammatory properties, lavender has soothing and balancing effects on the skin, green tea is rich in antioxidants that help protect the skin from damage, and rosemary has antimicrobial properties that can help cleanse and purify the skin.
Learn more:About popular botanical here:
https://brainly.com/question/28522723
#SPJ11
Draw a Business Process Model for BahnMi2U with all relevant
pool lanes, seperate participants and their processes
The Business Process Model for BahnMi2U can be represented using pool lanes to separate the participants and their processes.
Here is a step-by-step explanation:
1. Identify the main participants: In this case, the main participants would include BahnMi2U, customers, and suppliers.
2. Create a pool lane for BahnMi2U: This pool lane represents the processes carried out by BahnMi2U. For example, it could include activities such as receiving customer orders, preparing food, managing inventory, and delivering orders.
3. Create a pool lane for customers: This pool lane represents the processes carried out by customers. For example, it could include activities such as placing orders, making payments, and providing feedback.
4. Create a pool lane for suppliers: This pool lane represents the processes carried out by suppliers. For example, it could include activities such as supplying ingredients, managing deliveries, and invoicing.
5. Connect the processes: Use arrows to connect the processes between the pool lanes. For example, an arrow could represent the flow of customer orders from the customers' pool lane to BahnMi2U's pool lane. Another arrow could represent the flow of food deliveries from the suppliers' pool lane to BahnMi2U's pool lane.
6. Include relevant details: Add additional information as needed, such as decision points, data flows, or any other relevant details that are specific to BahnMi2U's business processes.
In conclusion, the Business Process Model for BahnMi2U should include pool lanes for BahnMi2U, customers, and suppliers, representing their respective processes. The model should clearly show the flow of activities and information between the participants. Remember to include relevant details and make sure the model accurately represents BahnMi2U's business processes.
To know more about Process Model visit:
brainly.com/question/28156876
#SPJ11
describe bob ewell's meeting with atticus at the post office.
In the novel bob ewell's meeting with atticus at the post office as Atticus wiped his face and began to walk away after the man spat in his face and threatened to kill him. When Bob Ewell questioned Atticus about his fear of conflict, Atticus responded, "No, too old."
After being spit on and threatened by Bob Ewell in Harper Lee's "To Kill a Mockingbird," Atticus wipes his face and leaves. When Bob asks Atticus if he is afraid of conflict, he answers coolly, "No, too old." This conversation demonstrates Atticus maturity and composure in the face of hostility.
Atticus opts to keep his cool and uphold his morals rather than get into a physical altercation. His reply suggests that he has learned the futility of violence through experience and wisdom. Atticus sets a powerful example of dignity in the face of adversity by refusing to lower himself to Bob Ewell's level.
Learn more about To Kill a Mockingbird at:
brainly.com/question/21896852
#SPJ4
The complete question is "In the novel To Kill A Mockingbird- describe bob ewell's meeting with atticus at the post office."
Metal Fabricators, Inc. manufacturers gas grill tanks, Model 1420, for four original equipment manufacturers (OEMs). Demand is forecast to be as follows: Quarter 1 - 3,000 tanks, Quarter 2 - 3,600, Quarter 3 - 3,800, and Quarter 4 - 3,100. Due to a hedging program for sheet steel and increases in International tariffs, production cost per quarter vary as follows: Quarter 1 - $25.00 per tank, Quarter 2 - $29.50, Quarter 3 - $27.40, and Quarter 4 - 530.50. Due to production contracts with the OEM, no shortages are allowed. Beginning inventory for Quarter 1 400 tanks. At the end of each quarter, inventory holding costs are $5.25 per tank. Formulate this as a linear optimization model but do not solve. Round your answers for the coefficients for objective function to two decimal places and round other answers to the nearest whole number. Use a minus sign where appropriate and do not leave any fields blank. If the constantia one or minus one, enter '1' or correspondingly. P = number of units produced in month, I inventory at the end of month 8 Minimal 363 62 62 32.9 PI total cost 39.2 P2 6.2 1 P P4 1: Is The constraints are as follows: P, number of units produced in month, I inventory at the end of month 3 X 6.2 X- 6.2 6.2 Minimal total cost 32.9 P: 39.2 P2 36.3 P3 1: PA IS 1) The constraints are as follows: + » .1 3900 Week 11 11 + + g Week 21 1 P2 .1 4800 1 g ♡ g 1 -1 Week 3: 5000 13 + 4100 Week 4 15 14 PI 2 O fort 1, 2, 3
The formulation of the model requires identifying the decision variables, defining the objective function, and determining the constraints based on the given information.
The given information presents the demand forecast, production cost, inventory holding costs, and beginning inventory for each quarter of the year for Metal Fabricators, Inc. The objective is to formulate this as a linear optimization model without solving it.
To formulate the model, we need to identify the decision variables, objective function, and constraints. The decision variable in this case is the number of units produced in each quarter, denoted as P1, P2, P3, and P4 for Quarters 1, 2, 3, and 4, respectively.
The objective function is the total cost, which includes the production cost, inventory holding costs, and any other relevant costs. The total cost can be calculated as follows:
Total Cost = (Production Cost x Number of Units Produced) + (Inventory Holding Cost x Inventory at the end of the quarter)
The constraints for the model can be derived from the given information. The constraints include the demand forecast for each quarter, the beginning inventory, and any restrictions on shortages. Since no shortages are allowed, the production should be sufficient to meet the demand, taking into account the beginning inventory.
To formulate the linear optimization model using the decision variables, objective function, and constraints mentioned above. However, the question is not complete and contains irrelevant information, making it difficult to provide a more detailed answer.
The formulation of the model requires identifying the decision variables, defining the objective function, and determining the constraints based on the given information.
To know more about Cost visit:
brainly.com/question/17120857
#SPJ11
Adjusted WACC.??Ashman Motors is currently an? all-equity firm. It has two million shares? outstanding, selling for ?$47 per share. The company has a beta of 1.4?, with the current? risk-free rate at 4.1?% and the market premium at 8.5?%. The tax rate is 15?% for the company. Ashman has decided to sell ?$47 million of bonds and retire half its stock. The bonds will have a yield to maturity of 10.8?%. The beta of the company will rise to 1.9 with the new debt. What was? Ashman's adjusted WACC before selling the? bonds? What is its new WACC after selling the bonds and retiring the stock with the proceeds from the sale of the? bonds???Hint?: The weight of equity before selling the bond is? 100%.
round to two decimal places
The adjusted WACC for Ashman Motors before selling the bonds was X%. After selling the bonds and retiring the stock with the proceeds, the new WACC is Y%.
To calculate the adjusted WACC before selling the bonds, we need to consider the all-equity capital structure of the company. The formula for WACC is WACC = (E/V) * Ke + (D/V) * Kd * (1 - T), where E is the market value of equity, V is the total market value of the firm, Ke is the cost of equity, D is the market value of debt, Kd is the cost of debt, and T is the tax rate. Since Ashman Motors is an all-equity firm, the weight of equity before selling the bonds is 100%. Therefore, the weight of debt is 0%. The cost of equity can be calculated using the Capital Asset Pricing Model (CAPM): Ke = Rf + β * (Rm - Rf), where Rf is the risk-free rate, β is the beta of the company, and Rm is the market premium.
To find the adjusted WACC after selling the bonds and retiring half the stock, we need to incorporate the new capital structure. The weight of equity will be 50% and the weight of debt will be 50%. The beta of the company will rise to 1.9 with the new debt, which will affect the cost of equity. We will recalculate Ke using the new beta value and the CAPM formula. Once we have the new weights and the adjusted cost of equity, we can calculate the new WACC using the same formula as before.
Please note that without specific values for the market value of equity and the market value of the firm, it is not possible to provide the exact values for the adjusted WACC before and after selling the bonds.
Learn more about bonds here: brainly.com/question/31358643
#SPJ11
The adjusted WACC before selling the bonds is [Adjusted WACC] and the new WACC after selling the bonds and retiring the stock is [New WACC].
To find the adjusted WACC (Weighted Average Cost of Capital) before selling the bonds, we need to calculate the weights of equity and debt. Since Ashman Motors is currently an all-equity firm, the weight of equity is 100%.
The formula for WACC is:
WACC = (Weight of Equity * Cost of Equity) + (Weight of Debt * Cost of Debt * (1 - Tax Rate))
1. Calculate the weight of equity:
Weight of Equity = 100%
2. Calculate the weight of debt:
Weight of Debt = (Total Debt) / (Total Debt + Total Equity)
Since Ashman Motors is selling $47 million of bonds and retiring half of its stock, the new total equity will be $47 million (half of the original equity). Therefore:
Weight of Debt = (47 million) / (47 million + 47 million) = 0.5
3. Calculate the cost of equity:
Cost of Equity = Risk-Free Rate + Beta * Market Premium
= 4.1% + 1.4 * 8.5%
= 4.1% + 11.9%
= 16%
4. Calculate the cost of debt:
Cost of Debt = Yield to Maturity of Bonds
= 10.8%
5. Calculate the adjusted WACC before selling the bonds:
Adjusted WACC = (Weight of Equity * Cost of Equity) + (Weight of Debt * Cost of Debt * (1 - Tax Rate))
= (100% * 16%) + (0.5 * 10.8% * (1 - 15%))
Now, to find the new WACC after selling the bonds and retiring the stock, we need to calculate the new weight of equity and debt.
6. Calculate the new weight of equity:
New Weight of Equity = (Total Equity) / (Total Debt + Total Equity)
Since Ashman Motors is retiring half of its stock, the new total equity will be $47 million (half of the original equity). Therefore:
New Weight of Equity = (47 million) / (47 million + 47 million) = 0.5
7. Calculate the new weight of debt:
New Weight of Debt = (Total Debt) / (Total Debt + Total Equity)
Since Ashman Motors is selling $47 million of bonds, the new total debt will be $47 million. Therefore:
New Weight of Debt = (47 million) / (47 million + 47 million) = 0.5
8. Calculate the new WACC after selling the bonds:
New WACC = (New Weight of Equity * Cost of Equity) + (New Weight of Debt * Cost of Debt * (1 - Tax Rate))
= (0.5 * 16%) + (0.5 * 10.8% * (1 - 15%))
Round the values to two decimal places.
Therefore, the adjusted WACC before selling the bonds is [Adjusted WACC] and the new WACC after selling the bonds and retiring the stock is [New WACC].
To know more about WACC refer here:
https://brainly.com/question/33116653#
#SPJ11
GSK is planning to spin off its Consumer Healthcare division. Analysts expect its dividends to start at £0.5 per year per share in the spin-off year and grow at a rate of 4% per year afterwards. Comparable Consumer Healthcare firms have an asset beta of 0.7. Assume a debt-to-capital ratio of 70% for the spin-off and a debt beta of 0. Risk free rate is 3.0%, market risk premium 8.0%.
A. Valuation.
(i) Estimatethefairinitialsharepriceofthespin-off.
(ii) How would your answer change if the new firm cuts its dividend next year to £0.1 per
share but recovers it again to the expected level in the year after?
[20 marks]
B. Risk. GSK has an asset beta of 0.4 and a debt-to-capital ratio of 0.7 now, prior to the spin-off. Analyst estimate the Consumer Healthcare division to account for 50% of its £100 billion enterprise value.
(i) WhatisGSK’scurrentequitybeta?
(ii) What will be GSK’s equity beta after the spin-off?
A. (i) The fair initial share price of the spin-off is estimated to be £37.49 per share. (ii) If the new firm cuts its dividend next year, the fair initial share price would be £7.49 per share.B. (i) GSK's current equity beta is not provided in the information given.(ii) GSK's equity beta after the spin-off is also not calculable based on the given information.
A. Valuation:
(i) To estimate the fair initial share price of the spin-off, we need to calculate the equity beta of the new firm and determine the cost of equity.
Step 1: Calculate the equity beta of the new firm:
The asset beta of comparable Consumer Healthcare firms is given as 0.7. Since the spin-off will have a debt-to-capital ratio of 70%, we need to unlever the asset beta to find the equity beta of the new firm.
Unlevered equity beta = Asset beta / (1 + (1 - tax rate) * (Debt / Equity))
Given:
Asset beta (β_a) = 0.7
Debt-to-capital ratio (D / C) = 70%
Tax rate = Not provided
Assuming a corporate tax rate of 30%:
Unlevered equity beta = 0.7 / (1 + (1 - 0.3) * (0.7 / 0.3)) = 0.7 / (1 + 1.4) = 0.7 / 2.4 = 0.2917
Step 2: Calculate the cost of equity:
The cost of equity can be calculated using the Capital Asset Pricing Model (CAPM):
Cost of Equity = Risk-Free Rate + Equity Beta * Market Risk Premium
Given:
Risk-Free Rate (R_f) = 3.0%
Market Risk Premium (R_m) = 8.0%
Equity Beta (β_e) = Unlevered equity beta = 0.2917
Cost of Equity = 3.0% + 0.2917 * 8.0% = 3.0% + 2.3336% = 5.3346%
Step 3: Estimate the fair initial share price:
The fair initial share price can be estimated using the dividend discount model (DDM). Since the dividends are expected to grow at a rate of 4% per year, we can use the Gordon growth model.
Fair initial share price = Dividend / (Cost of Equity - Dividend Growth Rate)
Given:
Dividend = £0.5 per year per share
Fair initial share price = £0.5 / (5.3346% - 4%) = £0.5 / 1.3346% = £37.49 (rounded to the nearest penny)
The fair initial share price of the spin-off is estimated to be £37.49 per share.
(ii) If the new firm cuts its dividend next year to £0.1 per share and recovers it to the expected level in the year after:
The fair initial share price would be affected by the change in dividends. We need to recalculate the fair initial share price using the new dividend figures.
Given:
Dividend next year = £0.1 per share
Dividend growth rate = 4%
Fair initial share price (with reduced dividend) = Dividend next year / (Cost of Equity - Dividend Growth Rate)
= £0.1 / (5.3346% - 4%) = £0.1 / 1.3346% = £7.49 (rounded to the nearest penny)
The fair initial share price, in this case, would be £7.49 per share.
B. Risk:
(i) To calculate GSK's current equity beta, we need to use the asset beta, debt-to-capital ratio, and the percentage of enterprise value accounted for by the Consumer Healthcare division.
Given:
Asset beta of GSK (β_a_GSK) = 0.4
Debt-to-capital ratio (D / C) = 0.7
Percentage of enterprise value accounted for by the Consumer Healthcare division
learn more about share price here:
https://brainly.com/question/31470248
#SPJ11
Mary saw an advertisement on Gumtree posted by Susan. Susan offered a motorbike for sale. Mary contacted Susan indicating that she is interested in purchasing the motorbike. They agree to meet at Menlyn Mall in order to conclude the deal. While having coffee at Wimpy, Mary offers to pay Susan R7, 000 for the motorbike, and for Susan to hand over the motorbike to Susan immediately upon payment. They agree the same afternoon at 16:00 to conclude the deal. Mary fails to show up at 16:00. When Susan phones her, Mary says that she found another motorbike for a cheaper price and that she no longer wishes to purchase the motorbike from Susan. Mary approaches you for advice.
Which ONE of the following statements is CORRECT?
a.
The contract is valid because both parties were of sound mind and were not minors (over the age of 18).
b.
The contract is valid because it came into being at the time and place when the offer and acceptance was made and communicated to one another.
c.
The contract is void because the parties were not in each other’s presence since Mary failed to show up to the deliver the R7, 000.
d.
The contract is void because the offer was rejected by Mary when she indicated over the telephone that she is no longer interested in purchasing the motorbike.
The statement is:d. The contract is void because the offer was rejected by Mary when she indicated over the telephone that she is no longer interested in purchasing the motorbike.
In this scenario, Mary and Susan entered into negotiations for the sale of the motorbike, but the contract was not yet concluded. He made an offer to purchase the motorbike for R7,000 and for immediate handover, which Susan presumably accepted. However, the contract was still conditional upon Mary's payment and receipt of the motorbike at the agreed time and place.
Since Mary failed to show up at the designated time and informed Susan over the telephone that she no longer wishes to purchase the motorbike, it can be considered as a rejection of the initial offer. As a result, the contract is void, and both parties are released from their obligations under the agreement.
Learn more about purchase here:
https://brainly.com/question/31035675
#SPJ11