t what speed does a 2000 kg compact car have the same kinetic energy as a 16000 kg truck going 24 km/hr

The principle that describes the uniform nature of pressure throughout a fluid is Pascal's Principle.

What does Pascal's principle state?

Pascal's principle states that when a pressure is applied to a confined fluid, the pressure is transmitted undiminished and equally in all directions throughout the fluid. This means that if an external force is applied to a confined fluid (like a gas or liquid), this force will be evenly distributed throughout the entire container, no matter where it is applied. For example, if you were to press down on a piston in a cylinder filled with oil, the same pressure would be felt on the other side of the cylinder as well.

This principle states that "pressure applied at any point in a confined incompressible fluid is transmitted undiminished to every part of the fluid and to the walls of the containing vessel." This explains why pressure is constant throughout a fluid since any applied pressure is distributed evenly to every portion of the fluid.

Therefore, Pascal's Principle is the correct answer.

To learn more about Pascal's Principle from the link

https://brainly.com/question/13094863

#SPJ4

You will be drawn toward the sun at midday, but the world will also be drawn in that direction. You will be lifted off your feet at midnight, but the moon also lifts you.

The gravitational attraction causes any two grain particles to be drawn toward one another. It mentions the gravitational pull. The force will constantly be generated along the line joining the two loads in the direction towards the other mass, as indicated by the formula F=Gm1m2r2.

Anything with mass is subject to gravity. Higher mass objects are subject to stronger gravity. Gravity lessens as distance increases as well. Because of this, objects are more attracted to one another when they are closer to one another.

To know more about Gravitational force visit:

https://brainly.com/question/72250

#SPJ4

Forces on object must be concurrent. Object must not deform under the forces. Object must not change shape. Object must not be large. Object must not rotate.

Force is a physical quantity that represents the interaction between two objects. Force can cause an object to accelerate or change its velocity. It can also cause a change in an object's shape or orientation. There are several types of force, such as gravitational force, electromagnetic force, and nuclear force.

An object can be treated as a particle under the following conditions:

Forces on object must be concurrent. Object must not deform under the forces. Object must not change shape. Object must not be large. Object must not rotate.

It's important to note that the concept of treating an object as a particle is a simplifying assumption used in some branches of physics, such as mechanics, and is only valid under certain conditions.

When an object is treated as a particle, it is assumed to have no internal structure, and that all forces acting on it act at a single point. The object is also assumed to be small enough that its deformation or shape change under forces can be ignored. Additionally, it is also assumed that the object does not rotate.

To know more about force, visit:

brainly.com/question/13191643

#SPJ4

The kinetic energy of the electron orbits a lithium nucleus that contains three protons ( 3e) whose radius of the orbit is 1.76x10-11 m is 123eV.

Given the lithium nucleus contains 3 protons also 3 electrons

The radius of orbit (r) = 1.76x10-11 m

We know the resultant force acting on the nucleus is F.

F = k x q(nu) x q(e)/r^2 = k x (3e) x(e) /r^2 = 3ke^2/r^2

This force is equal to centripetal force = mv^2/r where m is mass of electron, v is velocity

Then 3ke^2/r^2 = mv^2/r

3ke^2/r = mv^2

The kinetic energy is taken as (KE) = 1/2mv^2 = 3ke^2/2r

Here k = 8.99 x 10^9 Nm^2/C^2 and the charge on electron

(e) = 1.6 x 10^-19C

Then KE = 3 x 8.99 x 10^9 x ( 1.6 x 10^-19)^2 / 2 x 1.76x10-11

KE = 1.96 x 10^-17J = 122.6eV

Hence the required kinetic energy of the electron is 123eV.

To learn more about velocity click here https://brainly.com/question/18084516

#SPJ4

False. There does not have to be equal amounts of mass on both sides of the center of mass of an object.

Mass is a fundamental physical property of an object or system that measures its resistance to being accelerated by a force. Mass is measured in kilograms, grams, or pounds. It is also a measure of the amount of matter present in an object or system. Mass is related to the inertia of an object; the greater the mass, the greater the inertia. In physics, mass is also used to describe the amount of energy stored in an object due to its motion.

This is because the center of mass is determined by the balanced distribution of mass across the object. If a point mass is located far away from the center of mass, the gravitational pull of that mass does not need to be countered by an equal amount of mass on the opposite side of the center of mass for the object to be balanced. Instead, the influence of the point mass on the center of mass is much smaller than the influence of the mass close to the center of mass.

To know more about mass click-
https://brainly.com/question/19385703
#SPJ4

(a) The line density of the given grating is calculated to be 4831 lines / cm.

(b) There are two additional pares of bright spots beyond the first bright spot. θ₂ = 37.7° and θ₃ = 66.5°

(a) Given that,

λ = 632.8 nm = 632.8 × 10⁻⁹ m

θ₁ = ± 17.8

We know that the brilliant fringes' angle is determined by,

sin θ = mλ/d

For first bright fringe, m = ± 1

sin θ₁ = λ/d  ----(1)

Line density of this grating is given by, N = 1/d ----(2)

Making d as subject in (1), we have,

d = λ/ sin θ₁ ----(3)

Putting (3) in (2), we have,

N = sin θ₁/ λ = sin 17.8/(632.8 × 10⁻⁹) = 4.831 × 10⁵ line/m = (4.831 × 10⁵ lines/ 1m) × (1 m/100 cm) = 4831 lines / cm

(b) We know, d sin θ = m λ

So, d = m λ/sin θ = (632.8 × 10⁻⁹/sin 17.8) = 2067.4 × 10⁻⁹ m

Line density = 10⁻² / (2067.4 × 10⁻⁹) = 4830 lines/cm

To get additional bright spots, we take the condition sin θm < 1 which gives,

sin θ₂ = 2 sin θ₁ = 2× 0.3056 = 0.62

θ₂ = 37.7°

sin θ₃ = 3 sin θ₁ = 3 × 0.31 = 0.93

θ₃ = 66.5°

To know more about laser light:

https://brainly.com/question/10095891

#SPJ4

This is the description of a force vector diagram or force vector. This type of diagram is used in physics and engineering to represent the forces acting on an object and the direction in which they are acting.

They are commonly used in dynamics, mechanics, and physics to analyse the motion of objects and the forces that cause them to move.

A force vector diagram is a visual representation of the forces acting on an object in a given situation. It shows the direction and magnitude of each force and how they interact with one another.

These diagrams are commonly used in physics and engineering, particularly in the study of dynamics and mechanics. They help analysts understand the motion of an object and the forces causing that motion, making it easier to predict how the object will behave under different conditions.

Force vector diagrams are essential tools for understanding the physics behind the motion of objects and for designing structures and machines that can withstand various forces.

Learn more about force:

https://brainly.com/question/28875770

#SPJ4

The complete question is-

Which diagram is used to show the relative magnitude and direction of all forces acting upon an object in a given situation?

Since the relative velocity of the sound source and the blood flow is zero, the beat frequency is zero.

The expected beat frequency can be calculated using the Doppler shift formula, which states that the beat frequency (f) is equal to the difference between the emitted frequency (f0) and the received frequency (f) multiplied by the speed of sound in the medium (c) divided by the relative velocity of the blood flow (v) and the sound source.

f = (f0 - f) * c / (v + c)

Plugging in the given values:

f = (500 kHz - 500 kHz) * 1540 m/s / (2.0 cm/s + 1540 m/s)

f = 0 Hz

Since the relative velocity of the sound source and the blood flow is zero, the beat frequency is zero.

bund waves are similar to radar waves in that they both use sound waves to measure the distance and speed of objects. However, radar uses radio waves instead of sound waves, and it is typically used for detecting objects at a greater distance and at a higher speed than ultrasound.

Learn more about radar waves in brainly.com/question/20756411?

#SPJ1

Light is a type of electromagnetic radiation with a wavelength that the human eye can perceive. Kinetic energy is what it is. There needs to be a conversion during this process.

Is light energy kinetic or potential?

Kinetic energy must be transformed into the following forms of energy: (1) light energy, (2) nuclear energy, (3) gravitational potential energy, and (4) internal energy.

Can you describe nuclear energy as potential energy?

Kinetic and potential energy can take on a variety of shapes. The energy of gravity is one of them, along with mechanical, chemical, heat, electrical, optical, and nuclear energy.

To know more Light about visit : https://brainly.com/question/15200315

SPJ4

The direction of the airplane when it encounters the wind is approximately northeast. determine the direction of the airplane when it encounters the wind.

What is airplane ?

An airplane is a powered, fixed-wing aircraft that is propelled forward by thrust from a jet engine or propeller. Airplanes come in a variety of sizes, shapes, and wing configurations. The airplane is one of the most important forms of transportation, allowing for rapid and efficient travel across distances both near and far.

Airplanes are used for commercial air travel, military operations, private aviation, cargo transport, and leisure activities. To fly an airplane, a pilot must be knowledgeable in aviation regulations, safety protocols, and aircraft mechanics. With advances in technology, airplanes have become increasingly sophisticated, providing a safe and comfortable way to travel.

To learn about more airplane

https://brainly.com/question/24208048

#SPJ4

The maximum Current is 19.57 ohm, as mentioned inside the paragraph preceding.

A circuit in electronics is a totally circular path that electricity passes through. A current source, wires, and a load are the components of a basic circuit. Any ongoing channel for the conveyance of energy, info, or a signal is referred to as a "circuit" in a wide sense.

Voltage across the left 10 ohm resistance is V = IR = 0.92A * 10 ohm = 9.2 V

Thus this is the voltage across the 15 ohm and R

Therefore the current in the 15 ohm = 9.2/15 = 0.61 A

Kirchoff's current law states that current in = current out

So, from the 10 ohm & 15 ohm resistors, 2A is entering, while 0.92 + 0.61 are exiting.

Let current from R resistance is I₁

So, 2A = 0.92 + 0.61 + I₁

I₁ = 0.47A

For Resistance R,

V = I₁R

R = V/I₁ = 9.2/0.47

R = 19.57 ohm

To know more about Circuit visit:

https://brainly.com/question/1176850

#SPJ4

The frequency of the green light is approximately 5.45×10¹⁴ Hz, for wavelength 550nm.

Frequency is the dimension of the number of times that a repeated event occurs per unit of time.

The frequency of wave-like patterns including sound, electromagnetic waves (similar as radio or light), electrical signals, or other swells, expresses the number of cycles of the repetitious waveform per second.

In SI unit is 1 Hz means one cycle (or wave) per second.

The frequency of a wave can be calculated by using the equation:

frequency (f) = velocity (v) / wavelength (λ)

In the case of green light, the velocity is given as 299,792,458 m/s and the wavelength is given as 550 nm (0.00000055 meters). upon placing the values in the equation,

f = 299,792,458 m/s / 0.00000055 m

To get the frequency of the green light in hertz (Hz), which is the unit of frequency in the International System of Units (SI).

f = 5.454545454545454545454545454545e+14 Hz

So, the frequency of the green light will be approximately 5.45×10¹⁴ Hz.

To know more about wavelength, visit:

https://brainly.com/question/13533093

#SPJ4

This magnet may be divided in half to create two separate magnets, each featuring their own arrays of northern and southern magnetic poles. This is due to the absence of magnetic monopoles in nature.

Any substance that can draw iron and create a magnetic field around itself is a magnet. All known elements and several compounds had been investigated for magnetism by the end of 19th century, and it was discovered that every one of them has some sort of magnetic characteristic.

This demonstrates that magnetic monopoles cannot be created from a bar magnet. It is impossible for a bar to be split in two in order that one half possesses the magnetic north pole and the other the magnetic south pole. Instead, the east and west poles of each magnet will be unique.

To know more about Magnet visit:

https://brainly.com/question/14997726

#SPJ4

The equation allows you to calculate acceleration using the force and mass is F=m. Where m is mass and a is acceleration.

According to Newton's second rule of motion, a body's rate of momentum change is directly proportional to the force being applied to it, and momentum change occurs in the direction the force is being applied.

Acceleration is the rate at which velocity changes over time in both speed and direction. Acceleration refers to the change in speed or direction of an item or point travelling straight forward. Due to the constantly changing direction of motion around a circle, motion even at constant speed accelerates.

Learn more about force here:

brainly.com/question/1046166

#SPJ4

The relationship between the height of a ramp and the time it takes to complete one skate cycle (i.e. the time it takes to go from the top of the ramp to the bottom) is that as the height of the ramp increases, the time it takes to complete one cycle also increases.

This relationship is based on the principle of conservation of energy, which states that the total energy in a closed system remains constant. In the case of a skater on a ramp, the initial potential energy at the top of the ramp converts to kinetic energy as the skater descends and then back to potential energy as the skater reaches the bottom of the ramp. Since the initial potential energy is directly proportional to the height of the ramp, and the final potential energy must be equal to the initial potential energy, the time it takes to complete one cycle will also be directly proportional to the height of the ramp.

To know more about principle of conservation of energy visit:

https://brainly.com/question/9530080

#SPJ4

The distance has the car traveled during the 6 seconds is 90 m.

The rate during which velocity change is called acceleration. Acceleration usually indicates a change in speed, but not often. An object that pursues a circular route while keeping a constant speed is still moving forward because the vector of its motion is altering.

Given -

Mass m = 500kg

Initial velocity ,u = 0

Final velocity ,v = 30 m/s

Time , t = 6s

So, acceleration , a =?

By using first equation of motion = v= u+at

= 30 = 0+ a ×6

=30 = 0+6a

=6a = 30 = a = 30/6 = a = 5m/s^2

So, distance travelled = s= ?

By using second equation of motion = s = ut+ 1/2 at^2

= s = 0× 6+1/2×5×6×6

s = 0+90

s= 90 m

so the answer is = 90m

To know more about acceleration visit :

https://brainly.com/question/980919

#SPJ4

Answer:

Hope this helps :)

Explanation:

Look at the attached image

The resultant force will be 50pound .

A force is an influence that has the power to alter an object's motion. A force can cause an object with mass to accelerate when it changes its velocity, for as when it moves away from rest. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction. It is calculated using the newton SI unit (N).

We are given that,

F₁ = 40pound

F₂ = 30 pound

Fr = ?

The square root of the sum of the squares of the two forces can be used to determine the resultant of the two forces as follows,

Fr = √F²₁ + F²₂

Putting the value in above equation ,

Fr = √40² + 30²

Fr = √1600 + 900

Fr = 50pound

Therefore , the resultant force would be 50pounds.

To know more about force

https://brainly.com/question/12140804

#SPJ4

Answer:

5 sec

Explanation:

[tex]99 \div 21.8 [/tex]

"An astronomer observes the light of a galaxy that is 600 million light-years away. The age of light is 18.92 × 10¹⁵ s."

Given that,

Distance to the galaxy = 600 million light years = 600× 10⁶ light years = 6×10⁸ light years

We know the speed of light as, c = 3 × 10⁸ m/s

The relation between distance, speed and time is known to be,

Distance = Speed × Time

So, to know the age of time, let us make time as subject,

Time = Distance/Speed

1 light year = 9.46 × 10¹⁵ m

Putting in the above values,

Time = (6×10⁸ × 9.46 × 10¹⁵)/(3 × 10⁸) = 18.92 × 10¹⁵ s

Thus, the age of light is 18.92 × 10¹⁵ s.

To know more about light:

https://brainly.com/question/30019713

#SPJ4

Answer:

Explanation:

The amount of time it would take for a conveyor belt to do 40 J of work using a 15 W motor can be calculated by dividing the amount of work (40 J) by the power (15 W). This gives us a time of 2.67 seconds. Rounded to one decimal, this would be 2.7 seconds.

v = 22.492 k ms-1 is the escape speed of an electron that is initially at rest on the surface of a sphere.

The bare minimum speed required to reach infinity and escape the gravitational pull of a massive body is known as escape velocity. The orbital velocity of a body around which a small object revolves is referred to as orbital velocity. The link between orbital velocity and escape velocity is proportional.

The minimal speed necessary for an object to disengage from the gravitational pull of a large object is known as escape speed, often referred to as escape velocity. For instance, if we think of the earth as a large body.

1/2mv²= kqQ/r

        v= √2kqQ/rm

        v= √2×(9×10⁹)×(1.6×10⁻¹⁹)×(1.6×10⁻¹⁵)/(0.01)×(9.109×10⁻³¹)

        v = 22492 ms^-1

        v = 22.492 k ms^-1

To know more about escape speed visit:

https://brainly.com/question/15318861

#SPJ4

Answer:

They move and collide faster.

Explanation:

This is because increasing the temperature increases the kinetic energy of the gas particles. As a result they move rapidly having more more frequent collisions.

Answer:

When the temperature of the container increases, the kinetic energy of the gas molecule becomes high.

Explanation:

This means the collision rate of the particles increases. Due to the collision of gas particles, the pressure increases across the wall of the container.

The multiplicative factor rk for the initial kinetic energy is 2, as the kinetic energy doubles when the mass doubles.

Kinetic energy is the energy possessed by an object due to its motion. It is equal to the work done to accelerate the object from rest to its current velocity. Kinetic energy is associated with the motion of an object and is measured in joules (J). Kinetic energy is one of the most important forms of energy, as it is involved in many physical and chemical processes. Kinetic energy is also related to velocity, and can be calculated using the formula KE = ½ mv2, where m is the mass of the object and v is its velocity.

The multiplicative factor rw for the work done by the force is 1, as the work done by the force does not change when the mass of the particle changes.

To know more about kinetic energy click-
https://brainly.com/question/25959744
#SPJ4

The acceleration of the ball when it reaches its maximum height is approximately 9.8 m/s2.

Acceleration is the rate of change of velocity over time. It is a vector quantity, meaning it has both magnitude and direction. Acceleration can be caused by forces, such as gravity, friction, or thrust. It is a measure of how quickly an object is speeding up, slowing down, or changing direction. Acceleration can be positive, negative, or zero. Positive acceleration means an object is speeding up, while negative acceleration means an object is slowing down. Zero acceleration means an object is going at a constant speed in a straight line.

The acceleration of a ball thrown vertically upward when it reaches its maximum height is approximately equal to the acceleration due to gravity, or 9.8 m/s2. This is because the ball is no longer being propelled upwards and is instead falling back down to the ground. Thus, the acceleration of the ball when it reaches its maximum height is approximately 9.8 m/s2.

To know more about acceleration click-
https://brainly.com/question/605631
#SPJ4

Your first response to reduced visibility should be reducing your speed.

The term "visibility" refers to how far or well you are seeing in a certain meteorological scenario. Poor visibility prevailed. 2. a noncount noun When something is said to be visible, such as a situation or an issue, it refers to how much it is observed or observed by other people.

Visibility can indicate both "how well you can see" and "how well others will see something." Your running leggings' reflective stripes make you visible in the dark as they make you more visible to others.

To know more about visibility visit:

https://brainly.com/question/9724632

#SPJ4

The strength lens to be prescribed to correct this vision problem is 2.61 diopters.

Near point = 72cm

Normal point = 25cm

Using the lens formula -

1/f = 1/u + 1/v

where

f is the focal length

v is the image distance

u is the object distance

Substituting the values in the formula -

1/f = 1/25 + 1/(-72)

1/f = 0.0261

f = 1/0.0261

Therefore,

f = 38.31

f = 0.383m

Now, since the dioptric power is inverse of the focal length strength;

Therefore,

D = 1/f

= 1/ 0.383

= 2.61

Read more about the lens on:

brainly.com/question/3225974

#SPJ4

The blood that is leaving at B has a lower concentration of carbon dioxide.

We know that the blood can be shown to be a very important part of the circulatory system of the body of the individual. We know that the circulatory system is in charge of the movement of the blood and the lymph in the body.

Let us also recall that there is a very important interplay between the circulatory system and the respiratory system because in the both systems, there is the exchange of materials as we can see in the image.

Learn more about blood:https://brainly.com/question/14781793

#SPJ1

Centripetal force is the force that prevents an object from travelling in a straight line while it is moving due to its speed in a particular direction, or its velocity.

While an object moves because of its speed in a certain direction, or its velocity, centripetal force is the force that keeps the object moving in a circular motion. By pushing an object in the direction of the circle's centre, it achieves this.

The friction between the tyres and the road causes the centripetal force that makes the car turn in a circular motion. The car will move in a larger-radius curve and exit the road if the coefficient of friction is not at a minimum.

The rotating motion known as circular motion involves a rigid body moving in a plane while maintaining a constant distance between its centre of mass and its axis of rotation.

To learn more about circular path refer to:

https://brainly.com/question/106339

#SPJ1

It is possible to measure a material's density by how closely it is packed. The mass per unit volume is how it is formally defined.

Examples of dense materials include iron, platinum, and lead. Dense material can be found in many different rock and mineral kinds. The relationship between a substance's mass and volume is what is referred to as its density. kilograms per cubic metre (kg/m3) is used to measure density in the SI system.

density = mass/ volume

rearranging formula we get

mass = density / volume

From the question

side of cube of gold = 2.50 g

volume of cube of gold = (2.50)³

Density = 19.3 g/cm³

Fill in the variables in the formula above to find the mass.

Mass is equal to 19.3 / (2.50)3 = 48.25.

Consequently, the gold cube's weight is 48.25 g.

To know more about density click here

https://brainly.com/question/29775886

#SPJ4