tan(sin^-1(x-1)) find the exact value of the expression i nterms of x with the help of a reference triangle g

51.1% of the qualified applicants were accepted into the magnet school programs, 15.4% were waitlisted, and 33.5% were turned away due to a lack of space.

To find the relative frequency for each decision made by the school district's magnet school programs, we need to divide the number of applicants for each decision by the total number of qualified applicants.

Accepted applicants: 986 / 1928 = 0.511 or 51.1%

Waitlisted applicants: 297 / 1928 = 0.154 or 15.4%

Turned away applicants: 645 / 1928 = 0.335 or 33.5%

In summary, 51.1% of the qualified applicants were accepted into the magnet school programs, 15.4% were waitlisted, and 33.5% were turned away due to a lack of space.

for such more question on word problem

https://brainly.com/question/1781657

#SPJ11

Answer: The volume of the light sphere is 3052in³

Step-by-step explanation; diameter of sphere= 18in

therefore, the radius of the sphere = diameter/2

R = 18/2 = 9in

now, the volume of the light sphere = 4/3 πr³

Therefore volume = 4/3*3.14*9*9*9

                              =3052.08 in³  ≈ 3052in³

a) The simple harmonic motion of the bobber can be modeled by the equation:

y(t) = A sin(ωt + φ)

where y is the displacement of the bobber from its equilibrium position at time t, A is the amplitude of the oscillation, ω is the angular frequency, and φ is the phase angle.

From the given information, we know that the amplitude A of the oscillation is 1.5 inches and the period T is 3 seconds. The angular frequency is related to the period by the formula:

ω = 2π/T

Substituting the values, we get:

ω = 2π/3

The phase angle φ can be determined from the initial condition that the bobber is at its high point at t = 0. At the high point, the displacement is maximum and positive, so we have:

y(0) = A sin(φ) = A

Substituting the values, we get:

1.5 = 1.5 sin(φ)

Solving for φ, we get:

φ = sin⁻¹(1) = π/2

Substituting the values of A, ω, and φ in the equation for simple harmonic motion, we get:

y(t) = 1.5 sin(2πt/3 + π/2)

b) The midpoint between the high point and the low point of the bobber corresponds to a displacement of 0.5*A = 0.75 inches.

The bobber reaches this point twice during each period, once while going up and once while going down. We need to find the time t when the bobber is going down and reaches the midpoint for the first time.

At the midpoint, the displacement of the bobber is given by:

y(t) = 0.75

Substituting the equation for y(t), we get:

1.5 sin(2πt/3 + π/2) = 0.75

Simplifying, we get:

sin(2πt/3 + π/2) = 0.5

Using the identity sin(π/6) = 0.5, we can rewrite the equation as:

sin(2πt/3 + π/2) = sin(π/6)

The general solution for this equation is:

2πt/3 + π/2 = π/6 + 2πk or 2πt/3 + π/2 = 5π/6 + 2πk

where k is an integer.

Solving for t in each case, we get:

t = (π/18 - π/2)/ (2π/3) + k or t = (5π/6 - π/2)/ (2π/3) + k

Simplifying, we get:

t = 1/4 + k/3 or t = 5/4 + k/3

The first solution corresponds to the time when the bobber is going down and reaches the midpoint for the first time, so we have: t = 1/4 seconds.

Visit here to learn more about harmonic motion brainly.com/question/30404816
#SPJ11

(L3) The orthocenter will lie at the vertex of the right angle in a(n)  right  triangle.

. In a right triangle, the orthocenter will not always lie at the vertex of the right angle. The location of the orthocenter depends on the type of right triangle. If the right triangle is also an isosceles triangle, then the orthocenter will lie at the vertex opposite the hypotenuse. If the right triangle is a scalene triangle, then the orthocenter will not lie at any vertex of the triangle. Instead, it will lie outside the triangle on the extension of one of the sides.

Learn more about orthocenter

https://brainly.com/question/29576583

#SPJ4

The variance is approximately 177.5 and the standard deviation is approximately 13.32.

The standard deviation (SD, also written as the Greek symbol sigma or the Latin letter s) is a statistic that is used to express how much a group of data values vary from one another.

To find the variance and standard deviation of the data set {91, 101, 75, 90, 88, 87, 90, 60}, we first need to find the mean:

mean = (91 + 101 + 75 + 90 + 88 + 87 + 90 + 60) / 8 = 85.5

Next, we need to calculate the deviation of each data point from the mean:

91 - 85.5 = 5.5

101 - 85.5 = 15.5

75 - 85.5 = -10.5

90 - 85.5 = 4.5

88 - 85.5 = 2.5

87 - 85.5 = 1.5

90 - 85.5 = 4.5

60 - 85.5 = -25.5

Then, we square each deviation:

5.5² = 30.25

15.5² = 240.25

(-10.5)² = 110.25

4.5² = 20.25

2.5² = 6.25

1.5² = 2.25

4.5² = 20.25

(-25.5)² = 650.25

The variance is the average of these squared deviations:

variance = (30.25 + 240.25 + 110.25 + 20.25 + 6.25 + 2.25 + 20.25 + 650.25) / 8 = 177.5

Finally, the standard deviation is the square root of the variance:

standard deviation = sqrt(variance) = √(177.5) = 13.32 (rounded to the nearest hundredth)

Therefore, the variance is approximately 177.5 and the standard deviation is approximately 13.32.

Learn more about variance on:

https://brainly.com/question/9304306

#SPJ4

Answer: Type I error and Type II error are associated with hypothesis testing, where we test a hypothesis by collecting data and analyzing it.

For the given hypothesis, we can set up the null hypothesis as follows:

H0: The percentage of households with Internet access is less than or equal to 60%.

And the alternative hypothesis as:

Ha: The percentage of households with Internet access is greater than 60%.

Now, a Type I error occurs when we reject the null hypothesis (i.e., conclude that the percentage of households with Internet access is greater than 60%) when it is actually true. This means that we would be making a false claim that the percentage of households with Internet access is greater than 60%, when it is not.

On the other hand, a Type II error occurs when we fail to reject the null hypothesis (i.e., conclude that the percentage of households with Internet access is less than or equal to 60%) when it is actually false. This means that we would be missing the truth that the percentage of households with Internet access is greater than 60%.

So, in the context of the given hypothesis, a Type I error would be to conclude that the percentage of households with Internet access is greater than 60% when it is actually less than or equal to 60%, and a Type II error would be to fail to conclude that the percentage of households with Internet access is greater than 60% when it is actually greater than 60%.

There is not sufficient evidence to reject the claim that the mean weight of the cereal packets is at least 14 oz.

Η0 : μ = 14 (Null hypothesis)

H1 : μ < 14 (Alternative hypothesis)

At least sign is ≥ therefore, it should be in null hypothesis. Null Hypothesis, the mean weight of the individual serving boxes of the cereal company is 14 oz or less.

But, we can consider = sign instead of ≥ : Alternative Hypothesis, the mean weight of the individual serving boxes of the cereal company is greater than 14 oz.

Therefore, There is not sufficient evidence to reject the claim that the mean weight of the cereal packets is at least 14 oz.

To know more about hypothesis check below link:

https://brainly.com/question/25263462

#SPJ4

Complete question:

A cereal company claims that the mean weight of the cereal in its packets is at least 14 oz. Express the null and alternative hypotheses in symbolic form.

The average value of the function [tex]f(x) = x^{(1/2)[/tex] on the interval [0, 25] is 50.

An input and an output are connected by a function. It functions similarly to a machine with an input and an output. Additionally, the input and output are somehow connected. The traditional format for writing a function is f(x) "f(x) =... "

To find the average value fave of the function [tex]f(x) = x^{(1/2)[/tex] on the interval [0, 25], we need to use the following formula:

fave = (1/(b-a)) * ∫(a to b) f(x) dx

where a and b are the endpoints of the interval [0, 25].

Substituting the values for a, b, and f(x), we get:

fave = (1/(25-0)) * ∫(0 to 25) [tex]x^{(1/2)[/tex] dx

Using the power rule of integration, we can simplify the integral:

fave = (2/50) * [[tex]x^{(3/2)/(3/2)[/tex]] from 0 to 25

fave = (4/50) * [[tex]25^{(3/2)[/tex] - [tex]0^{(3/2)[/tex]]

fave = (4/50) * ([tex]25^{(3/2)[/tex])

fave = 10√25

fave = 10(5)

fave = 50

Therefore, the average value of the function [tex]f(x) = x^{(1/2)[/tex] on the interval [0, 25] is 50.

Learn more about function on:

https://brainly.com/question/10439235

#SPJ4

there are 70 simple random samples of size 4 that can be selected from a population of size 8. Your answer is 70.by using combination concept

There are 70 simple random samples of size 4 that can be selected from a population of size 8.
To determine how many simple random samples of size 4 can be selected from a population of size 8, we can use the combination formula, which is:

C(n, k) = n! / (k!(n-k)!)

where C(n, k) is the number of combinations, n is the total population size, and k is the sample size.

In this case, n = 8 and k = 4. Plugging the values into the formula:

By following function

C(8, 4) = 8! / (4!(8-4)!)

C(8, 4) = 8! / (4!4!)

C(8, 4) = (8×7×6×5) / (4×3×2×1)

C(8, 4) = 1680 / 24

C(8, 4) = 70

To  know more about combination Visit:

https://brainly.com/question/4546043

#SPJ11

The coordinates of point R is (1.5, 0)

In coordinate geometry, we use two perpendicular lines called axes to locate a point. The horizontal axis is called the x-axis, while the vertical axis is called the y-axis. The point where the two axes meet is called the origin, and it has coordinates (0,0).

To find the coordinates of point R, we need to know its distance from the x-axis and the y-axis. The distance from the x-axis is called the y-coordinate, and the distance from the y-axis is called the x-coordinate.

Looking at the given diagram, we can see that point R is located at the intersection of the vertical line x= 1.5 and the horizontal line y = 0. This means that the x-coordinate of point R is -1, and the y-coordinate is 2.

Therefore, the coordinates of point R are (1.5,0).

To know more about coordinates here

https://brainly.com/question/27749090

#SPJ4

We do not have sufficient evidence to conclude that the mean pressure produced by the valve is greater than 4.3 pounds/square inch at a level of significance of 0.01.

What is the mean and standard deviation?

A concise measurement of how far each observation deviates from the mean is the standard deviation. If the differences themselves were tallied up, the positive would perfectly balance the negative and their aggregate would be zero. In order to combine the squares of the differences.

The null hypothesis is that the true mean pressure produced by the valve is equal to the designed mean pressure of 4.3 pounds/square inch:

H₀: µ = 4.3

The alternative hypothesis is that the true mean pressure produced by the valve is greater than 4.3 pounds/square inch:

Ha: µ > 4.3

We will use a one-sample t-test to test this hypothesis. The test statistic is calculated as:

[tex]t = (x - \mu) / (s / \sqrt(n))[/tex]

where x is the sample mean, µ is the hypothesized population mean, s is the sample standard deviation, and n is the sample size.

Plugging in the given values, we get:

t = (4.5 - 4.3) / (0.8 / √(19)) = 1.84

Using a t-distribution table with 18 degrees of freedom (n-1), and a significance level of 0.01 (one-tailed test), the critical t-value is 2.552.

Since our calculated t-value of 1.84 is less than the critical t-value of 2.552, we fail to reject the null hypothesis.

Therefore, there is not enough evidence to conclude that the valve performs above the designed specifications at a significance level of 0.01.

To learn more about the mean and standard deviation visit:

brainly.com/question/475676

#SPJ4

Part (a)  K is a normal extension of E, but not of F.

Part (b) L is a normal extension of F, but L' is not.

Part (a)

Let E = KG(K,F). Since E is a field extension of F and K is a finite extension of F, then K is a normal extension of E. This is because F[K] is a finite separable extension and hence normal.

However, K is not a normal extension of any field F ⊆ E. This is because K is not a normal extension of F by assumption.

Part (b)

(a) L is a normal extension of F. This is because K is a normal extension of F (by assumption) and L is a splitting field of a polynomial over F, and so is a finite extension of K. Hence, L is a normal extension of F.

(b) Let L be any field such that K ⊆ L and L ≠ L'. Then L is not a normal extension of F. This is because K is a normal extension of F, and if L were a normal extension of F, then L' would also be a normal extension of F by transitivity. Because  L ≠ L', L is not a typical extension of F.

Complete Question:

Suppose that the characteristic of F is 0, and that K is a finite, but not normal, extension of F. (a) Let E = KG(K,F). Show that K s a normal extension of E, but not of any field F ES E. Solution. Proof (b) Suppose K -F(a) for some aE K. Let L be the splitting field of the minimal polynomial of a over F, with K C L. Prove that: (a) L is a normal extension of F Solution. Put your answer here... (b) For any field L, such that K L, Ç L, L' is not a normal extension of F. (L is called the normal closure of F in K.) Solution. Put your answer here...

To learn more about normal extension visit:

https://brainly.com/question/2833285

#SPJ4

For a NaCl crystal has six slip systems,

A) The exact slip planes are [tex][\bar 1 1 0] [/tex], [tex][0 \bar1 1] [/tex], [tex][\bar 1 0 1] [/tex], [ 1 1 0], [0 1 1] and [ 1 0 1] and slip direction are (110), (011), ( 101) , [tex]( \bar 1 1 0) [/tex], [tex](0 \bar 11 ) [/tex] and [tex]( \bar1 0 1) [/tex] of te six systems.

B) The sketch of the slip plane and slip direction for each slip system is present in attached figure.

C) Slip systems (ii), (iii), (v) & (vi) are the suitable ones.

We have a NaCl crystals has slip on {110} < 110 > slip systems. Total number of possible systems = 6

The slip plane refers to the plane of maximum atomic density, and the slip direction is the closest folded direction in the slip plane.

A) For six possible systems, slip planes and slip directions are the following:

plane : [tex][\bar 1 1 0] [/tex].

Plane : [tex][0 \bar1 1] [/tex]

plane : [tex][\bar 1 0 1] [/tex]

plane : [ 1 1 0]

plane : [0 1 1]

plane : [ 1 0 1]

B) Using the standard cubic representations, the slip plane and slip direction of each system is present in attached figure.

C) Shear is y stress would at assis ; suitable 21 be highest in the direction which either x axis and y axis parallel to system (ii), (iii), (v) & (vi) are the suitable ones. Hence, we resolved all parts.

For more information about slip plane, visit :

https://brainly.com/question/31631295

#SPJ4

P is the centroid of triangle ABC, and we have AP = CP = BP, which is what we needed to prove.

Since â„“, m, and n are perpendicular bisectors of the sides of triangle ABC, they intersect at the circumcenter O of triangle ABC.

Since O is the circumcenter of triangle ABC, it lies on the perpendicular bisectors of all three sides. Therefore, OA = OB = OC.

Now, consider triangle AOC. Since OA = OC and â„“ is the perpendicular bisector of AC, â„“ passes through the midpoint of AC, which we will call D. Therefore, AD = CD.

Similarly, consider triangle BOC. Since OB = OC and n is the perpendicular bisector of BC, n passes through the midpoint of BC, which we will call E. Therefore, BE = CE.

We know that â„“, m, and n intersect at point P, so P is the intersection of lines AD, BE, and OC. Therefore, P is the centroid of triangle ABC, and we have AP = CP = BP, which is what we needed to prove.

for such more question on centroid

https://brainly.com/question/1214333

#SPJ11

Answer:

Step-by-step explanation:

√2+√2= 2√2=√8

-2√18+2√2= -2√9*2 +2√2= -6√2+2√2=-4√2=-√32

To find a parametrization of the surface 3x^2 + 8xy, we can use two parameters u and v, such that x = u and y = v.

Substituting these values into the equation gives us z = 3u^2 + 8uv. Therefore, a parametrization of the surface is (u, v, 3u^2 + 8uv).

To find the tangent plane at x = 1, y = 0, z = 3, we need to first find the partial derivatives of the parametric equation with respect to u and v. These are:

∂/∂u (u, v, 3u^2 + 8uv) = (1, 0, 6u + 8v)
∂/∂v (u, v, 3u^2 + 8uv) = (0, 1, 8u)

Evaluating these partial derivatives at the point (1, 0, 3), we get:

∂/∂u (1, 0, 3) = (1, 0, 6)
∂/∂v (1, 0, 3) = (0, 1, 8)

Using the cross product of these two vectors, we can find the normal vector to the tangent plane:

(1, 0, 6) x (0, 1, 8) = (-6, -8, 1)

Therefore, the equation of the tangent plane is:

-6(x-1) - 8y + (z-3) = 0

To compare this with the graph, we can plot the surface using a software such as WolframAlpha, and then plot the tangent plane at the given point.

The tangent plane should appear as a flat surface tangent to the original surface at that point.

learn more about tangent here:brainly.com/question/19064965

#SPJ11

The value of the given integral ∫ x³dx +y²dy +z dz is 81.

What is line origin?

The point of departure. It is zero on a number line. Where the X and Y axes cross on a two-dimensional graph, like in the graph shown here: O is sometimes used as a symbol.

Here, we have

Given; x³dx +y²dy +zdz, where c is the line from the origin to the point (4, 3, 4).

Let x =4t , y =3t ,z =4t ,0≤t ≤1

dx =4dt , dy =3dt , dz =4dt

∫ x³dx +y²dy +zdz

=[tex]\int\limits^1_0 {x} \, dx[/tex][(4t)³4dt +(3t)²3dt +(4t)4dt]

=[tex]\int\limits^1_0 {x} \, dx[/tex][(256t³ +27t² +16t] dt

=[tex]\int\limits^1_0 {x} \, dx[/tex][([64t⁴ +(9)t³ +8t²]

= [64×1⁴ +(9)×1³ +8×1²​]  - [64×0⁴ +(9)×0³ +8×0²​]

= 81

∫ x³dx +y²dy +z dz = 81

Hence, the value of the given integral ∫ x³dx +y²dy +z dz is 81.

To learn more about the line origin from the given link

https://brainly.com/question/29112504

#SPJ4

Step-by-step explanation:

You are looking for the LCM of  15 and 42

The volume of the solid is 12sqrt(3).

To find the volume of the solid whose base is the region inside the circle x² + y² = 9, we need to integrate the area of each square cross-section perpendicular to the y-axis.

Let's consider a cross-section of the solid taken at y = k, where k is a value between -3 and 3 (the range of y-values for the circle x² + y² = 9). The width of the cross-section is the distance between the x-coordinates of the intersection points of the circle with the line y = k. These intersection points are (sqrt(9 - k²), k) and (-sqrt(9 - k²), k). Since the cross-section is a square, its area is equal to the square of the width, which is sqrt(9 - k²) - (-sqrt(9 - k²)) = 2sqrt(9 - k²).

Therefore, the volume of the solid is given by the integral of the area of each cross-section as follows:

V = ∫(-3 to 3) 2sqrt(9 - y²) dy

To evaluate this integral, we can use the substitution u = 9 - y², du = -2y dy:

[tex]V = \int (9 to 0) \sqrt{u} du/(-2)\\= -1/2 \times [2/3 \times u^{(3/2)}](9, 0)\\= 2/3 \times (27\sqrt{3} - 9\sqrt{9} )\\= 2/3 \times 18\sqrt{3} \\= 12\sqrt{3}[/tex]

for such more question on volume

https://brainly.com/question/6204273

#SPJ11

The approximate volume of the sphere with a radius of 3 inches is 113.04 cubic inches.

A sphere is simply a three-dimensional geometric object that is perfectly symmetrical in all directions.

The volume of a sphere is expressed as:

Volume =  (4/3)πr³

Where r is the radius of the sphere and π is the mathematical constant pi (approximately equal to 3.14).

Given that: radius r = 3 in

Substituting r = 3 inches and π = 3.14

Volume =  (4/3)πr³

Volume =  (4/3) × 3.14 × (3 in)³

Volume =  (4/3) × 3.14 × 27 in³

Volume =  113.04 in³

Therefore, the volume is 113.04 cubic inches.

Learn more about volume of hemisphere here: https://brainly.com/question/22886594

#SPJ1

If Janet provides 4 waiting spaces, the expected fraction of potential customers that will be lost due to inadequate waiting space is 0.0042, or about 0.42%.

What is the fraction?

A fraction is a mathematical representation of a part of a whole, where the whole is divided into equal parts. A fraction consists of two numbers, one written above the other and separated by a horizontal line, which is called the fraction bar or the vinculum.

To determine the expected fraction of potential customers that will be lost due to inadequate waiting space, we need to use queuing theory to model the car wash operation.

Let's consider the two scenarios:

(a) 2 waiting spaces:

In this case, we can model the system as an M/M/2 queue, where arrivals follow a Poisson process with a rate λ = 1/5 customers per minute and service times follow an exponential distribution with rate μ = 1/4 cars per minute.

The utilization factor of the system is ρ = λ/2μ = (1/5)/(2*(1/4)) = 0.4, which is less than 1, so the system is stable.

Using Little's Law, we can calculate the expected number of customers in the system:

L = λ * W

where L is the expected number of customers in the system, λ is the arrival rate, and W is the expected time a customer spends in the system (i.e., waiting time plus service time).

The expected waiting time in an M/M/2 queue can be calculated as:

Wq = (2ρ)/(2 - ρ) * (1/λ)

where Wq is the expected waiting time in the queue.

The expected time in the system can be calculated as:

W = Wq + (1/μ)

Substituting the values, we get:

Wq = (2*0.4)/(2-0.4) * (1/1/5) = 1 minute

W = 1 + 1/4 = 1.25 minutes

The expected fraction of potential customers that will be lost due to inadequate waiting space can be calculated as:

P(lost) = ρ² / (1 - ρ) * (1 - 2ρ⁽ⁿ⁻¹⁾ + ρⁿ)

where n is the number of waiting spaces. In this case, we have n = 2, so:

P(lost) = 0.4² / (1 - 0.4) * (1 - 2*0.4⁽²⁻¹⁾+ 0.4²) = 0.196

Therefore, if Janet provides 2 waiting spaces, the expected fraction of potential customers that will be lost due to inadequate waiting space is 0.196, or about 19.6%.

(b) 4 waiting spaces:

In this case, we can model the system as an M/M/4 queue, where arrivals follow a Poisson process with rate λ = 1/5 customers per minute and service times follow an exponential distribution with rate μ = 1/4 cars per minute.

The utilization factor of the system is ρ = λ/4μ = (1/5)/(4*(1/4)) = 0.25, which is less than 1, so the system is stable.

Using the same formulas as before, we can calculate:

Wq = (4*0.25)/(4-0.25) * (1/1/5) = 0.625 minute

W = 0.625 + 1/4 = 0.875 minutes

P(lost) = 0.25² / (1 - 0.25) * (1 - 2*0.25⁽⁴⁻¹⁾ 0.25⁴) = 0.0042

Therefore, if Janet provides 4 waiting spaces, the expected fraction of potential customers that will be lost due to inadequate waiting space is 0.0042, or about 0.42%.

To learn more about the fraction visit:

brainly.com/question/30154928

#SPJ4

Two values result in a perimeter of 48 and an area of 108, the rectangle must have two dimensions of 18 and 6. The garden's dimensions are 18 meters and 6 meters because we use meters.

We can use these two facts to set up our equations because perimeter is the sum of all four sides (X, X, Y, Y) and area is the product of length and width (X × Y).

Given  :                  Perimeter = 2 X + 2 Y  = 48

                              Area = X × Y  = 108

We can determine the values of x and y by solving this system of equations because we have two equations and two unknown variables. To isolate x, let's reorder the area equation as follows:

                              X × Y    = 108

                                  X = 108/Y

The following expression should be used in place of X in the perimeter equation:

                               2 X + 2 Y = 48

                           2(108/Y) + 2 Y = 48

By multiplying everything by Y and solving the quadratic equation, we can now determine Y's value:

                        2(108/Y) + 2 Y = 48

                       216/Y + 2 Y = 48

                      216 + 2 Y² = 48 Y

                    2 Y² - 48 Y + 216 = 0

                      Y² - 24 Y + 108 = 0

                         (Y-18)(Y-6) = 0

So y can be 18 or 6. To determine the value of x, we plug these individually into the area equation and observe that x can also be 18 or 6:

                         X × Y = 108

                             X × 18 = 108

                                 x = 6

                                X × Y = 108

                                   X × 6 =108

                                     X = 18

Since these two values result in a perimeter of 48 and an area of 108, the rectangle must have two dimensions of 18 and 6. The garden's dimensions are 18 meters and 6 meters because we use meters.

Learn more about perimeter of rectangle  :

brainly.com/question/24571594

The degree of freedom is 2 and the p-value is between 0.0005 and 0.001.

To calculate the degrees of freedom, we need to first determine the number of rows and columns in the table. Here, we have 3 rows and 2 columns, so the degrees of freedom will be (number of rows - 1) x (number of columns - 1) = 2 x 1 = 2.

To calculate the chi-squared statistic, we need to first calculate the expected values for each cell assuming the null hypothesis of independence. The expected value for the cell in the first row and first column can be calculated as follows:

Expected value = (row total x column total) / grand total

Expected value = (172 x 147) / 291

Expected value = 86.93

Similarly, we can calculate the expected values for the other cells:

Expected value for cell (1,2) = (172 x 144) / 291 = 85.07

Expected value for cell (2,1) = (171 x 147) / 291 = 86.07

Expected value for cell (2,2) = (171 x 144) / 291 = 84.93

Expected value for cell (3,1) = (167 x 147) / 291 = 84.93

Expected value for cell (3,2) = (167 x 144) / 291 = 82.07

Using these expected values, we can calculate the chi-squared statistic as follows:

[tex]X^{2}[/tex] = Σ[[tex](O-E)^{2}[/tex] / E]

[tex]X^{2}[/tex]  = [[tex](79-86.93)^{2}[/tex] / 86.93] + [[tex](93-85.07)^{2}[/tex] / 85.07] + [[tex](103-86.07)^{2}[/tex] / 86.07] + [[tex](44-84.93)^{2}[/tex] / 84.93] + [[tex](68-84.93)^{2}[/tex] / 84.93] + [[tex](99-82.07)^{2}[/tex] / 82.07]

[tex]X^{2}[/tex]  = 19.46

To find the exact P-value, we can use a chi-squared distribution table with 2 degrees of freedom. From the table, we see that the probability of getting a chi-squared value of 19.46 or higher with 2 degrees of freedom is between 0.0005 and 0.001. Therefore, the exact P-value for this test is between 0.0005 and 0.001.

To learn more about degree of freedom here:

https://brainly.com/question/31424137

#SPJ4

The second number in terms of n is x = n - 8.

Let the second number be x.

The fact that the first number is eight more than the second number is clear.

n = x + 8.    ...(1)

It is given that the third number is five more than the first number

n + 5 = y     ...(2)

We want to solve for x in terms of n, so we can use the first equation to get x in terms of n:

From equation 1 and 2

n + 5 = y = (x + 8) + 5

n + 5 = x + 13

x = (n + 5) - 13

x = n - 8

Therefore, the second number in terms of n is x = n - 8.

Learn more about Arithmetic problems here

https://brainly.com/question/10171217

#SPJ4

The volume of the completed rectangular prism that have a height of 7 cubes will be 63 cubic units.

The volume of a rectangular prism is given by the formula V = lwh, where l is the length, w is the width, and h is the height of the prism. In this case, the base of the prism has 3 x 3 cubes, which means the length and width are both 3 cubes.

Therefore, l = 3 and w = 3. The height of the prism is given as 7 cubes. Thus, h = 7.

Substituting the given values in the formula for volume, we get:

V = lwh

= 3 x 3 x 7

= 63

To learn more about volume click on,

https://brainly.com/question/16842258

#SPJ1

FALSE. The number of dots in a dotplot of a bootstrap distribution is equal to the size of the bootstrap sample, not the original sample.

In a bootstrap analysis, multiple samples of the same size are drawn from the original sample with replacement, creating a distribution of sample statistics. The dotplot of this distribution represents the frequency of the sample statistics and can help us understand the variability of the original sample.

The number of dots in the dotplot reflects the number of bootstrap samples, which can be much larger than the original sample size. Therefore, the number of dots in the bootstrap distribution can be different from the size of the original sample.

Learn more about bootstrap distribution

https://brainly.com/question/24113161

#SPJ4

In a case whereby the middle of {1, 2, 3, 4, 5} is 3 and the middle of 1, 2, 3, 4} is 2 and 3 the true statements are;

A statement  can be considerd to be true ,in a case whereby if what it asserts is the case,  in the same dimension it can be considered to be  false if what it asserts is not the case.

Instance of this can be seen above whereby An odd number of data values will always have one middle value and An even number of data values will always have two middle numbers.

Learn more about true statements at:

https://brainly.com/question/31215049

#SPJ1

The orthogonal projection of vector v = (7,-4) onto the subspace w spanned by vector u1 = (1,1) is (3/2, 3/2).

To find the orthogonal projection of v onto w, we need to find the projection vector p, where p is the closest vector in w to v.

Since the vectors ui are orthogonal, the subspace w is the span of u1 only. Therefore, we need to find the scalar projection of v onto u1

proj_u1(v) = ((v·u1) / ||u1||²) * u1

where · denotes the dot product, and ||u1|| denotes the norm of u1.

We have

v·u1 = (7)(1) + (-4)(1) = 3

||u1||² = (1)² + (1)² = 2

So,

proj_u1(v) = (3 / 2) * u1 = (3/2, 3/2)

Therefore, the orthogonal projection of v onto w is p = proj_u1(v) = (3/2, 3/2).

To know more about orthogonal projection:

https://brainly.com/question/2292926

#SPJ4

When talking about a scale drawing or model, the scale factor is determined by the ratio of a given length on the drawing or model to its corresponding length on the actual object.

This can be written as a fraction, with the length on the drawing or model as the numerator and the corresponding length on the actual object as the denominator. For example, if a drawing of a building has a scale factor of 1:100 and the length of a wall on the drawing is 5 cm, the corresponding length on the actual building would be 500 cm (5 cm x 100). Therefore, the scale factor can be written as 5/500 or simplified to 1/100.

When talking about a scale drawing or model, the term you're looking for is "scale factor." It is determined by the ratio of a given length on the drawing or model to its corresponding length on the actual object. To write this as a fraction, you would place the length on the drawing or model as the numerator and the corresponding length on the actual object as the denominator. For example, if the scale factor is 1:10, you would write it as 1/10.

Visit here to learn more about  fraction : https://brainly.com/question/10354322
#SPJ11