Tech a says that a direct tpms system uses a pressure sensor located in each wheel. Tech b says that an indirect tpms system uses wires to connect the pressure sensor located in each wheel to the pcm. Who is correct?.

Answers

Answer 1

Tech a says that a direct TPMS system uses a pressure sensor, but tech b says that an indirect TPMS system uses wires to connect the pressure sensor. Only Tech A is correct.

What is a tire-pressure monitoring system (TPMS)?

An electronic device called a tire-pressure monitoring system (TPMS) is used to keep track of the air pressure in pneumatic tires on different kinds of automobiles.

A TPMS provides the driver of the vehicle with real-time tire pressure data via a gauge, a pictogram display, or a straightforward low-pressure warning light.

Therefore, only Tech A is correct.

To learn more about (TPMS), refer to the link:

https://brainly.com/question/15202666

#SPJ1


Related Questions

Karl listed the steps involved when information is sent from transmitters to receivers. 1 - a signal is produced. 2 - radio waves are modulated and amplified. 3 - an antenna sends modulated waves through the air. 4 - an antenna captures the modulated waves. 5 - a signal is heard, seen, or used. Which describes the missing step? after step 5, radio waves are amplified and demodulated. Before step 5, radio waves are amplified and demodulated. After step 3, radio waves are amplified and demodulated. Before step 3, radio waves are amplified and demodulated.

Answers

After the number 4, there is a missing step. Because the antenna must first demodulate the waves it has captured before the signal can be heard, seen, or used.

What do you mean by demodulation?

The process of demodulation involves separating a carrier wave's original information-carrying signal. In a software-defined radio, a demodulator is an electrical circuit that extracts the information content from a modulated carrier wave.

Demodulators come in a wide variety of forms due to the diversity of modulation. An analog audio signal, an analog video signal, or binary data may be included in a demodulator's output signal (a digital signal).

For instance, a demodulator is used in a modem—a contraction of the terms modulator and demodulator—to separate a serial digital data stream from a carrier signal that is used to send the data across a phone line, coaxial cable, or optical fiber.

To learn more about demodulator, use the link given
https://brainly.com/question/14825566
#SPJ4

a user complains that his usb scanner no longer works. you check device manager and see an icon with a black down arrow through it. what should you do?

Answers

We should Remove and then reinstall the device.

What is USB scanner?

A USB barcode scanner is, to put it simply and plainly, a scanner that uses software that is easily transferred to your computer and connects directly to a PC or Mac via a USB port.

Start by typing Remove in Settings once you've opened it with the Windows+I keyboard shortcut. Select Programs to add or remove. Select uninstall if the device or driver package you want to remove shows in the list of programs.

You must use Device Manager to uninstall the device if your device or driver package is not listed. The driver package can also be deleted using Device Manager if that device is the only one using it. Select the Start button, type Device Manager, and then press Enter to start Device Manager.

Then take these actions:

Turn on Show Hidden Devices under the View menu.Right-click the device entry for the device you wish to uninstall, pick Uninstall from the context menu, then expand the node that represents the type of device you want to uninstall.If you want to uninstall the device and the driver package at the same time, choose the Delete the driver software for this device option on the Confirm Device Removal dialog box. Select OK when you're ready to finish the operation.

To learn about Remove and reinstall click here:

https://brainly.com/question/17506968

#SPJ4

What is the advantage of using CSS?
O A.
O B.
O c.
OD.
It stores data separately.
It streamlines the HTML document.
It creates a better-structured document.
It allows clickable actions.

Answers

b It streamlines the HTML document.

Give an example of a positive emotion, a negative emotion, and a neutral emotion. Then give an example of how a game can make you feel each of these emotions.
Think about a good game story that made you feel a mix of positive and negative emotions. What was the story, what emotions did you feel, and how did the game make you feel them? Why did those emotions draw you into the story?
We usually think of conflict as bad or something to be avoided. How can conflict be used to a game’s advantage in game design? Include an example.
Think about what you do each weekday evening, starting with dinner and ending when you go to bed. Describe your activities as a sequence of at least five instructions. Describe at least one way that changing the order of that sequence might mess up your night.
Describe common gaming tasks that would use each of the following: a forever Loop, a conditional-controlled loop, a count-controlled loop.

Answers

Answer:

Explanation:

The give an examples of how a game can make you feel each of these emotions. ... good game story that made you feel a mix of positive and negative emotions.

1. Happy, angry and bored, a game can make you happy if you win, if it is too hard you could get angry and want to rage and if the game just keeps repeating it will get boring !

2.  Well in Scratch there was a game that was very interesting. It played a song that made me happy and it was very relaxing. I was so surprised by the game when it started playing funky sounds!

3. For the dungeon dash it wasn't pretty easy to do, but the part that was so cool is that it made some epic sounds and the more time you play the game the fireballs will increase!  

4.  1. Brushing my teeth, 2. Eating breakfast, 3.Going to school, 4. Eat lunch, 5. Do homework, 6. Eat Dinner. 7. Go to sleep!

5.  A forever loop is a loop that repeat FOREVER, a conditional-controlled loop is a loop that is controlled by the words you gave it, a count-controlled loop is telling it to repeat in numbers!

a bluetooth network is called a(n) , which consists of no more than slave devices, in addition to a master device.

Answers

Piconet, 7 a bluetooth network is called a(n) , which consists of no more than slave devices, in addition to a master device.

What is piconet?

A piconet is a tiny Bluetooth network that creates a personal area network by employing ultra-high frequency (UHF) radio waves to link mobile devices wirelessly over a 10-meter radius (PAN).

Eight stations can make up a piconet, with one serving as the master node and the others as slave nodes. As a result, it may hold up to 7 slaves. The main station in charge of running the little network is called the master node. Secondary stations that are synchronized with the parent station are called slave stations.

One-to-one or one-to-many communication between a master node and a slave node is possible. However, there is no direct interaction between slaves.

Hence to conclude piconet has slave devices

To know more on pico net follow this link

https://brainly.com/question/10479017

#SPJ4

three common storage options discussed in your text are hard disk, blank, and solid-state storage.

Answers

Three common storage options discussed in your text are hard disk, blank, and solid-state storage. are called optical.

What is Storage?

A computer can store data either momentarily or permanently using this approach. Most digital gadgets need storage components like flash drives and hard disks because they let users store all types of data, including films, documents, photographs, and raw data.

What is Optical disk?

An optical disk is typically utilized as a supplemental storage option that is portable. It has a substantially longer lifespan and can store more data than the previous generation of magnetic storage media. The three types of optical disks that are currently most often used are compact disks (CD), digital versatile/video disks (DVD), and Blu-ray disks. Typically, these disks are used for:

Customer software distributionKeep a lot of data, including music, pictures, and videos.moving data between computers or devicesback up information from a nearby computer

Learn more about Optical disk click here:

https://brainly.com/question/28066311

#SPJ4

Using the examples found in the readings for this week, create a simple, yet unique graphic using SVG. The graphic should incorporate shape transformation methods and animation. Share both the code and screen capture of the graphic.

Answers

SVG on the web offers benefits beyond just producing graphics that are independent of resolution. You can add cool animations and effects to your front end with a little CSS and JavaScript without asking the user to download large plugins. The code is given below:

index.html

<!DOCTYPE html>

<html>

<head>

 <meta charset="utf-8">

 <title>SVG lines with transform/rotate</title>

</head>

<body>

<svg width="500" height="350">

 <circle id="circle orange" r="30" cx="50" cy="50" fill="orange" />

 <rect id="rectangle blue" width="50" height="50" x="25" y="200" fill="#0099cc"></rect>

 

 <animate

          xlink:href="#circle orange"

          attributeName="cx"

          from="50"

          to="450"

          dur="5s"

          begin="click"

          fill="freeze"

          id="circ-anim"/>

 

 <animate

          xlink:href="#rectangle blue"

          attributeName="x"

          from="50"

          to="425"

          dur="5s"

          begin="circ-anim.begin + 1s"

          fill="freeze"

          id="rect-anim"/>

 

</svg>

<p>Click on the circle and rectangle to animate.</p>

SVG.css

svg {

 border: 3px solid #eee;

 display: block;

 margin: 1em auto;

}

p {

 color: #aaa;

 text-align: center;

 margin: 2em 0;

}

Scalable Vector Graphics (SVGs) highly useful in some situations, despite their limits, and if you have a skilled design team, you can also produce a more aesthetically attractive experience without unduly taxing the web browser or delaying load times.

To learn more about Scalable Vector Graphics (SVGs) click here:

brainly.com/question/20748542

#SPJ4

if you need to go beyond simple system resource monitoring, what windows utility will allow you to check current file use by applications; and start, restart, pause, and end services?

Answers

Utilize the Performance Monitor graphical tool to assess SQL Server's performance if you are using the Microsoft Windows server operating system. The behavior of various objects, including processors, memory, cache, threads, and processes, as well as performance counters are all available to view.

How can software performance be tracked?A system and performance monitoring tool called SysGauge allows users to keep an eye on things like CPU and memory usage, network transfer rate, operating system performance, the status and resource usage of processes that are currently running, file system performance, USB performance, disk space usage, disk read and write activity, disk...A relational database management system (RDBMS) called Microsoft SQL Server serves a wide range of business intelligence, analytics, and transaction processing applications in corporate IT environments.Utilize the Performance Monitor graphical tool to assess SQL Server's performance if you are using the Microsoft Windows server operating system. The behavior of various objects, including processors, memory, cache, threads, and processes, as well as performance counters are all available to viewers.    

To learn more about SQL Server refer to:

https://brainly.com/question/5385952

#SPJ4

a device which has the mac address of fc99:3845:2201 is using the eui-64 process to create an ipv6 address. what will be the interface id it creates?

Answers

The process used by an IPv6 SLAAC equipped host to generate its own unique Interface ID using the host's MAC address is known as EUI-64 or the modified Extended Unique Identifier.

What is IPv6 ?The most recent iteration of the Internet Protocol, a communications standard that directs data across the Internet and offers a method for identifying and localizing machines on networks, is version 6.Data transfers and communication over networks are made possible by the network layer protocol known as Internet Protocol Version 6 (IPv6). In 1998, IPv6 was created with the sole intent of eventually superseding and replacing IPv4 protocol.It is preferable to continue enabling IPv4 and IPv6 addresses whenever possible. Because only roughly one-third of the internet supports IPv6 addresses, using exclusively IPv6 can have some accessibility problems.

To learn more about IPv6 refer to:

https://brainly.com/question/28837313

#SPJ4

using the celsiustokelvin function as a guide, create a new function, changing the name to kelvintocelsius, and modifying the function accordingly.

Answers

After modifying the function, the code is:
double kelvintocelsius(double valuekelvin)  
kelvintocelsius

{

         double valuecelsius = valuekelvin - 273.15;

     return valuecelsius;

}

What is the use of a funtion in Javascript?

A procedure in JavaScript is a collection of statements that executes an action or calculates a value. However, for a procedure to be considered a function, it must take an input and return an output with an obvious relationship between the input and the output.

Because the function can appear anywhere an expression can appear in the code, we can write concise, easily understandable code as a result. A function can help you avoid cluttering your code with names that aren't necessary when a function isn't going to be used repeatedly.

To learn more about a function, use the link given
https://brainly.com/question/179886
#SPJ4

In microsoft access, when you have the field name firstname display as first name, you are changing what field property?.

Answers

In Microsoft access, when you have the field name firstname display as first name, you are changing the "Caption" property.

What is a field in access?

There are fields in every table in Access. The traits and behavior of data entered into a field are described by the field's properties.

The data type of a field controls the types of data that can be stored in that field, making it the most significant feature. A field might contain details about the employee, such as their name, the date they were hired, or their social security number.

To learn more about a field in access, use the link given
https://brainly.com/question/25266819
#SPJ4

what types of information would be included in a human resource relational database? (select all that apply)

Answers

Human resource databases are collections of information about businesses, employees, etc. Employee information, including personal data, training, salary information, reimbursement information, worksheet information, and time chart information, is stored in the HR database.

What is HR?
The department of a company tasked with finding, vetting, hiring, and training job applicants is known as human resources (HR). Additionally, it manages benefit plans for employees. In the twenty-first century, HR is critical to helping businesses adapt to a business environment that is changing quickly and to the increased demand for qualified workers. The term "human resource" was first used by American institutional economist John R. Commons in his 1893 book The Distribution of Wealth. However, it wasn't until the 20th century that HR divisions were formally established and given the responsibility of resolving disputes between workers and their employers.

To learn more about HR
https://brainly.com/question/10583893
#SPJ4

which of the following best describes robot sentries? robot sentries are robots that have access to an enterprise's secret data. robot sentries are robots that act as fire suppressors. robot sentries are robots that have an internal cctv system installed. robot sentries are robots that have access to all the confidential data of an enterprise.

Answers

The best description of robot sentries is robot sentries are robots that act as fire suppressors. The correct option is b.

What are robot sentries?

Robot sentries are teams of autonomous mobile security robots known as the Sentry Bots that can be easily incorporated into current security systems.

These mobile security robots are energy independent due to their ability to recharge their batteries without human intervention. They can also navigate on their own.

Therefore, the correct option is b. robot sentries are robots that act as fire suppressors.

To learn more about robot sentries, refer to the link:

https://brainly.com/question/9605765

#SPJ1

Name the wireless technology that may work with one device and not with another.

Answers

The wireless technology that may work with one device and not with another is:

b. None of the above

What is wireless technology?

Wireless technology refers to a way of connecting devices to share the same network. Wireless fidelity is designed to work with other devices while the cellular network is able to make connections through radio frequencies.

The common factor among all of the technologies listed is the fact that they can connect with devices. So, none of the options fit the description of the technology that may work with one device and not with another. So, option B is right.

Options

a. 802.11n

b. none of the above

c. Wi-Fi

d. Cellular

Learn more about wireless technology here:

https://brainly.com/question/27975067

#SPJ1

What careers are usually unchanged by market factors?

Answers

The careers that are usually unchanged by market factors are:

BankingTeachingIT work, etc.What does "market factors" mean?

Economists refer to all of the resources that firms utilize to buy, rent, or hire the equipment they use to generate goods or services as the "factor market." The factors of production—raw materials, land, labor, and capital—are what are required to meet these needs.

Note that the types of market factors are:

Government regulations international circumstancesInvestment speculating.Supply and demand for products.Buying age.employment expansion.lack of certain skills.Job switching.

Learn more about careers  from

https://brainly.com/question/1199865
#SPJ1

how can a business make a wide area network secure? (check all that apply). multiple select question. use a local area network use dedicated leased lines use a virtual private network

Answers

The best way to maintain WAN security is to mandate that all users connecting to your WAN do so via a virtual private network (VPN).

What is Wide Area Network (WAN) ?

Broadband Network (WAN) : A computer network that covers a wide geographic area is called a WAN. A wide area network often comprises of two or more local area networks (LANs).

Public networks like the Internet are frequently used to connect computers to a wide area network. They can also communicate via satellites or leased lines.

Network Security : WAN Security covers not only the residences of your employees but also your company buildings.

The best way to maintain WAN security is to mandate that all users connecting to your WAN do so via a virtual private network (VPN).

With the use of a VPN, you may transit any voice or data traffic via a public WAN as though it were on a private circuit or local area network (LAN). This secure tunnel safeguards your data.

By gaining access to a Microsoft employee's home computer, a hacker was able to penetrate Microsoft security.

The employee who was using the VPN to connect to the corporate office and the hacker could both access Microsoft by simply using the same connection. The PC that connects from home is typically one of your network security's weakest points.

The Total Computer Solutions (TCS) team advises that all devices join your network and do so using a VPN. It's important to secure and manage the gadgets.

Full domain security should be implemented, corporate anti-malware software should be deployed, and security patches that are up to date should be required.

Even though it may be an employee's personal computer and not business property, once a VPN connection is established with it, the home computer has now joined your corporate network as a node. It can propagate malware, ransomware, and viruses on the LAN as a node.

To Learn more About WAN security Refer To:

https://brainly.com/question/15285146

#SPJ4

write a method to remove all of the elements from the 'stack' (one by one) and add them to a queue. create a new queue of type queuearray. if stack is null, then just return an empty queue. otherwise, return a queue that contains all the elements that were popped off the stack. make sure you use the interfaces above to solve the problem.

Answers

The last-in first-out (LIFO) principle is used to insert and remove items from a stack of objects.

What is a stack a LIFO structure?The stack is known as a Last In First Out (LIFO) list because the element at the top of the stack is the most recent element to be added using the insert operation and it is also the element that will be deleted first by the delete operation.Keeping items on a stack data structure is intended to ensure that the most recent item is found first. It only allows access to the stack's top element (the most recent element). The last-in, first-out (LIFO) sequence is used to handle the objects.A stack data structure is designed to store objects so that the most recent item is found first. Only the top element in the stack is accessible (the most recent element). Items are therefore handled in a last-in, first-out (LIFO) order.

To Learn more About last-in first-out Refer To:

https://brainly.com/question/26428647

#SPJ4

which cisco ios command is used to advertise a default route into ospf regardless of whether a default static route is configured?

Answers

The "default-information originate" command is used to advertise a default route into OSPF regardless of whether a default static route is configured.

What is static routes?
When a router uses a manually configured routing entry rather than data from dynamic routing traffic, this is known as static routing. Though it's not always the case, static routes are frequently manually set up by a network administrator besides adding entries to a routing table. Static routes have been fixed and remain the same regardless of network changes or configurations, in contrast to dynamic routing. Dynamic routing and static routing are not incompatible. In order to maximise routing efficiency and provide fallbacks in the event that dynamic routing information cannot be exchanged, a router typically uses both dynamic routing and static routing. Static routing may also be employed in stub networks or as a last-resort gateway.

To learn more about static routes
https://brainly.com/question/6783973
#SPJ4

Instructions:
Choose 2 of the following questions and answer fully and include examples and details to convey your understanding of the information you learned in this unit. You will be graded based on the rubric included with this lesson. You will need to include the essay questions with your answer and save in a separate Word document and submit when completed.

1. What are the laws of supply and demand? Which factors cause supply and demand to shift? Explain with details and examples.

2. Market structures are determined by the amount of competition. What are the key characteristics of each market? Explain the characteristics for the following: monopoly, oligopoly, perfect competition, and monopolistic competition.

3. What does it mean that an item or service is elastic versus inelastic? Give three examples of each and explain how each influences your choices?

Answers

Two fundamental laws in economics that can be used to describe market behaviour, in general, are the Law of supply and the Law of demand.

What are the laws of supply and demand?

The law of supply is the first law. According to the law of supply, vendors will be eager to sell more goods for more money.

The law of demand is the second law. Consumers will be willing to buy more at cheaper prices, according to the law of demand. In other words, the relationship between the cost and the amount consumed is negative. The demand curve slopes downward.

Which factors cause supply and demand to shift?

Changes in tastes, population, income, the cost of substitute or complementary goods, and expectations regarding future conditions and prices are just a few of the variables that can cause the demand curve for goods and services to shift, resulting in a different quantity being demanded at any given price.

What are the key characteristics of the following?

Monopoly: One Good, One firm, No entry

Oligopoly: Differentiated goods, Few firms, Battery to entry

Perfect Competition: Homogeneous goods, Numerous firms, Free Entry and Exit.

Monopolistic Competition:  Differentiated goods, Many firms, Free entry and exit.

What does that an item or service is elastic or inelastic?

Demand elasticity, often known as the elasticity of demand, gauges how consumers react to changes in price or income.

While demand for a commodity or service remains constant when its price or another factor changes, inelasticity of demand is present.

Some examples are Luxury products and particular foods and beverages are elastic goods because demand is influenced by price changes for them.

Products like nicotine and prescription medications may be considered inelastic goods since the demand for them frequently remains constant despite price fluctuations.

Hence, the solution is given.

To learn more about the Law of supply from the given link

https://brainly.com/question/1222851

#SPJ1

in what type of communication does a single source transmit a message to a large number of receivers?

Answers

Mass communication. ​It is also known as Public communication. In other words, it is the process of disseminating information via written and verbal means to large audiences.

What is Mass communication ?

The process of disseminating and exchanging information with large populations through mass media is known as mass communication. Since its technologies are used for the dissemination of information, of which journalism and advertising are a part, it is typically understood to relate to various forms of media.

Multiple media, including radio, television, social networking, billboards, newspapers, magazines, books, film, and the Internet, are used to conduct mass communication. Mass communication is employed in the modern period to spread information quickly, frequently regarding politics and other contentious subjects.

The development of mass communication dates back to the earliest forms of art and writing, around 800 AD, and includes the invention of the Gutenberg printing press in 1455, the first printed weekly newspaper in Antwerp in 1605, radio by Marconi in 1895, and television by John Logie.

To learn more about Mass communication refer :

https://brainly.com/question/18363250

#SPJ4

What ip feature limits how many times a packet can bounce between the two routers?.

Answers

TTL or “Time to Live” is the IP feature that limits how many times a packet can bounce between the two routers.

Define a packet. State the significance of IP packets.

A network packet in telecommunications and computer networking is a structured data unit transported over a packet-switched network. User data commonly referred to as the payload, and control information makes up a packet. For data that travels over networks, including the Internet, Internet Protocol (IP) transfers are employed.

The most essential and basic elements of the protocol are IP packets. In addition to carrying data during transmission, they have a header that provides data that enables them to navigate and reassemble themselves after transmission.

To learn more about packet, use the link given
https://brainly.com/question/27243365
#SPJ4

A security administrator has discovered that workstations on the LAN are becoming infected with malware. The cause of the infections appears to be users receiving phishing emails that are bypassing the current email-filtering technology. As a result, users are being tricked into clicking on malicious URLs, as no internal controls currently exist in the environment to evaluate their safety. Which of the following would be BEST to implement to address the issue?Forward proxyHIDSAwareness trainingA jump serverIPS

Answers

The  implement to address the issue is forward proxy .

What is meant by forward proxy?

Between one or more user devices and the internet, a forward proxy acts as an intermediate. A forward proxy server reviews a client request, takes any necessary actions, and routes the request to the destination on the client's behalf rather than validating the request and delivering it directly to a web server.

Between users on a private network and online resources, including SaaS apps, is the forward proxy mode. Traffic that requests access to resources on a private network is intercepted by a reverse proxy mode.

There are forward proxies (also known as tunnel proxies or gateways) and reverse proxies (used to manage and safeguard user access to a server for caching, load-balancing, authentication, or decryption).

To learn more about forward proxy refer to:

https://brainly.com/question/13147459

#SPJ4

"fifa uncovered," a documentary exploring the behind-the-scenes workings of soccer’s global governing body debuts nov. 9 on which network?.

Answers

Answer:

Netflix

Explanation:

This does not require an explanation, it has been announced that it will be streaming only on Netflix.

Murphy communications has been running a vlan-managed network to connect different devices. you as a network analyst want to assign a name to the vlan network, but you are unable to do so. what kind of vlan is most likely being used in the organization?

Answers

The kind of VLAN likely to be used in this organization is  Default VLAN

VLAN stands for Virtual Local Area Network. Default VLAN

Following the switch's initial bootup, all switch ports join the default VLAN. The broadcast domain is shared by all of these ports because they participate in the default VLAN. As a result, any device on any port can communicate with devices on other switch ports.

Any untagged data packets will be tagged with the default VLAN tag on ports with a configured default VLAN. Also, before leaving these ports, incoming data packets with the default VLAN tag will be untagged.

Configuring all switches' ports to be associated with VLANs other than VLAN 1 is a security best practice. Usually, to do this, all open ports are given to a black hole VLAN that is not used for any network activities.

learn more about Default VLAN here: https://brainly.com/question/5789383

#SPJ4

write an sql query that retrieves all pairs of suppliers who supply the same product, along with their product purchase price if applicable.

Answers

The sql query that retrieves all pairs of suppliers who supply the same product, along with their product purchase price if applicable is illustrated below:

select sr.supnr as "Supplier No.",sr.supname as "Supplier Name", p.prodnr as "Product No.", p.prodname as "Product Name",s.purchase_price as "Purchase Price" from supplier as sr,supplies as s,product as p where sr.supnr=s.supnr and s.prodnr=p.prodnr and p.prodnr in(select s1.prodnr from supplies as s1 group by s1.prodnr having COUNT(s1.supnr) > 1)

What is Structured Query Language (SQL)?

Structured Query Language (SQL) is a programming language designed for managing data in a relational database management system or for stream processing in a relational data stream management system.

A query is a request for information or data from a database table or tables. This data may be generated as Structured Query Language (SQL) results or as pictorials, graphs, or complex results, such as trend analyses from data-mining tools.

Learn more about SQL on:

https://brainly.com/question/25694408

#SPJ1

What technology that was developed in the early 1880s was used for both mining reclaiming land in the california delta?.

Answers

The technology that was developed in the early 1880s ,that was used for both mining reclaiming land in the california delta is hydraulic mining.

A type of mining known as hydraulic mining involves moving silt or displacing rock material with the help of high-pressure water jets. The resulting water-sediment slurry from placer mining for gold or tin is sent through sluice boxes to extract the gold. Kaolin and coal mining both use it.

Ancient Roman practices that employed water to remove soft subsurface minerals gave rise to hydraulic mining. Its contemporary form, which makes use of pressured water jets generated by a nozzle known as a "monitor," was developed in the 1850s in the United States during the California Gold Rush. Despite being effective in extracting gold-rich minerals, the process caused significant environmental harm due to increased flooding and erosion as well as sediment blocking water ways and covering farmland.

To know more about hydraulic mining click here:

https://brainly.com/question/13970465

#SPJ4

the adjusted trial balance section of the worksheet is computed by combining which sections of the worksheet:

Answers

The adjusted trial balance section of the worksheet is computed by combining  adjustments sections of the worksheet.

What is Trail balance?

A trial balance is a financial report that displays the general ledger's closing balances for all accounts at a certain point in time. The first stage in closing the books at the conclusion of an accounting month is to create a trial balance.

What is worksheet?

Cells in a worksheet (sometimes referred to as a spreadsheet) can be used to enter and compute data. Columns and rows have been used to arrange the cells. A workbook is where a worksheet is always kept. Many worksheets can be found in a workbook. Consider it a book.

A worksheet can be made smaller or larger to fit on printed sheets. To do that, select the window launcher button in Page Setup. To use a percentage of the normal size, enter it after clicking Scaling > Adjust to.

Learn more about worksheet click here:

https://brainly.com/question/27871440

#SPJ4

What is the abbreviated name for a 'tunnel interface' in the output of your vpn boot-up sequence output?.

Answers

Answer: tun (no capitalization needed)

__________ requires that controls are put in place to secure the corporate network, prevent unauthorized access to systems and data, and ensure data integrity and availability in the event of a disaster or other disruption of service.

Answers

The sarbanes-oxley act requires that controls are put in place to secure the corporate network, prevent unauthorized access to systems and data, and ensure data integrity and availability in the event of a disaster or other disruption of service.

What do you mean by Disruption of services?

An interruption or degradation in the delivery of one or more Services by NOVOSERVE to CLIENT is referred to as a service disruption, provided that the interruption or degradation is not brought on by an exclusion. Service Credit refers to a credit that has been applied to the client's account and utilized as a credit against future charges, as determined by the SLA Agreement.

What is The sarbanes-oxly act?

The U.S. Congress passed the Sarbanes-Oxley Act of 2002 on July 30 of that year in an effort to safeguard investors against misleading financial reporting by businesses.Also referred to as the SOX Act of 2002, it required stringent updates to current securities laws and placed severe new penalties on offenders.

The Sarbanes-Oxley Act of 2002 was passed in reaction to early 2000s financial crises affecting publicly traded businesses like WorldCom, Tyco International plc, and Enron Corporation.

The high-profile thefts undermined investor faith in the reliability of corporate financial statements and prompted many to call for an update to long-standing regulatory norms.

Learn more about The sarbanes-oxly act click here:

https://brainly.com/question/24214720

#SPJ4

what is the function of C:\> Copy *. doc B :​

Answers

Answer:

I can't say for now but I have a friend who can help you with ut

Other Questions
Every month, Theresa sets aside $410.60 of her paycheck to use as spending money. This month, she plans to use of her spending money for groceries.How much money would Theresa have this month to 2/5 spend on items other than groceries? Trace the steps involved in ecological succession in an area completely destroyed by a catastrophic event, such as a volcano. marbles are sold in boxes in bags or single marbles each has 10 bags or marbles in it each bad has 10 in it IXL Help Fast ! Please And Thank You For Helping Me :) Match the following phases:Column A1.Chromatids remain attached at their centromeres as the spindle fibers move the homologous chromosomes to opposite poles of the cell.: 2.A nuclear envelope forms around each set of chromosomes, the spindle breaks down and the cytoplasm divides, resulting in 4 haploid cells.: 3.Chromosomes gather at the poles; the cytoplasm divides.: 4.The nuclear envelope breaks down; genetic material is exchanged through crossing over: 5.Chromosomes line up at the equator.: 6.Pairs of homologous chromosomes line up at the equator.: Column Ba. Telophase Ib. Metaphase Ic. Anaphase IId. Metaphase IIe. Telophase IIf. Prophase I a bond that has fixed, semi-annual coupon payments and the principal is due in-full at the end of the term is best described as: all of the following uses of applied behavior analysis are especially important except: question 4 options: increasing desirable behavior. using prompts and shaping behavior. decreasing undesirable behavior. modifying involuntary responses. If the area of AABC is 288in, and if DB = 15in, and CD = 9in, what is the length of AD This question I need help with asap If 35s was found in progeny phages rather than 32p, hershey and chase would have concluded that. Help me Understand how 12 + 5 = 169 = 13 Using the Pythagorean Theorem Michael's mom loves Bright Scents candles. A 4-inch candle will burn for 8 hours. Michael bought his mom a 10-inch candle for Mother's Day.If Bright Scents candles all burn at the same rate, how many hours will the 10-inch candle burn? Researchers are investigating whether people who exercise with a training partner have a greater increase, on average, in targeted exercise intensity compared with people who exercise alone. Two methods of collecting data have been proposed. Method i: recruit volunteers who are willing to participate. Randomly assign each participant to exercise with a training partner or to exercise alone. Method ii: select a random sample of people from all the people who exercise at a community fitness center. Ask each person in the sample whether they use a training partner, and use the response to create the two groups. Child-FILL IN THE BLANK kindergartens focus on educating the whole child by focusing on his or her physical, cognitive and socioemotional needs Describe, in your own words, how tensions in the movement to expand thevote ultimately pitted the white women's suffrage movement against theAfrican American suffrage movement. the lifetimes of lightbulbs of a particular type are normally distributed with a mean of 392 hours and a standard deviation of 9 hours. find the 90th percentile. a minor's (under age 17) driver license will be suspended for a first-time offense of driving under the influence of alcohol by a minor for . A bacteria culture initially contains 2000 bacteria and doubles every half hour.Find the size of the baterial population after 80 minutes. Find the size of the baterial population after 8 hours. I need BOTH questions answered pls! in which spatial technique do objects placed lower on the picture plane appear to be closer than objects placed higher on the picture plane? as a product owner, you need to add estimates to your backlog items. you and your team have over 100 items to estimate and less than one hour to do it. because of the time limit, you need a technique that will help your team quickly sort items by complexity. which effort estimation technique should you use? 1 point