T/F All amino acid based hormones are lipid soluble and can cross the plasma membrane.

Answers

Answer 1

False All the amino acid based hormones are not lipid soluble and can not cross the plasma membrane.

Amino acid-derived as well as polypeptide hormones are water-soluble and insoluble in lipids. These hormones cannot pass through the plasma membranes of the cells; therefore, their receptors are found on the surface of the target cells.

Amino acids are those molecules which will combine to form proteins.  When the proteins are digested or broken down, amino acids will be left. The human body uses amino acids to make proteins to help out the body: Repair body tissue, Grow, and Perform many other body functions.

Amino acids are also be used as a source of energy by the body.

To know more about amino acid here

https://brainly.com/question/15823799

#SPJ4


Related Questions

what is the limiting reagent when 16 grams of ch4 is reacted with 64 grams of o2? what remains after the reaction?

Answers

CH4 is limiting reagent and H20 remains after the reaction.

What is limiting reagent?

A limiting reagent is a reactant that entirely consumes itself before any other reactants are used up in a chemical reaction, hence restricting the amount of product that may be created. It can be found by comparing the proportions of each component in the reaction and its stoichiometry. Once the limiting reagent has been determined, the amount of product that can be generated can be computed using the reaction's stoichiometry.

[tex]CH_4+2O_2- > CO_2+2H_2O[/tex]  

number of moles of CH4= given mass/atomic mass

=> 16/16

so the number of moles of CH4 is 1

number of moles of O2 = 64/32

=2

so CH4 1 mole get vanished after the reaction and the gases like CO2 and O2 fly away so the limiting reagent is CH4  

To know more about  limiting reagent click below:

https://brainly.com/question/11848702#

#SPJ4

which of these minerals would be the main component in the cement slab in your house?

Answers

The main component in a cement slab in a house is typically Portland cement.

Key points:

Portland cement is a type of hydraulic cement that is commonly used in the construction of buildings, bridges, roads, and other structures.It is made by heating a mixture of limestone and clay to high temperatures, a process known as calcination.The resulting material is ground into a fine powder, which can be mixed with water, sand, and gravel to form concrete.The concrete is then poured and leveled to form the slab.The cement reacts with water to form a paste that binds the other materials together, creating a strong and durable building material.Portland cement is also used in other types of construction, such as in the production of mortar and stucco.Other types of cement such as blended cement can be used too, depending on the requirement and the availability of the raw materials.

Learn more about cement slabs here:

https://brainly.com/question/5842807

#SPJ4

What did I do wrong and how would I do this correctly?

Answers

The mass of the hydrogen gas produced is equal to 0.368 g, not 0.322 this is wrong mass .

The reaction between calcium and water yields the following balanced chemical equation: 2 Ca  + 2 H₂O  →  2 CaOH + H₂

Given :

that the mass of calcium is 14.7 g,

the number of moles of calcium is 14.7/40, which equals 0.3675 mol.

The number of moles of water is 11.5/18, which equals 0.638 mol.

Two moles of calcium react with two moles of water.

Calcium is therefore a limiting reagent.

What is the chemical equation?

The mass of 0.1838 mol of hydrogen gas is 0.368 g, and 0.3675 mol of Ca produces hydrogen gas. A balanced chemical equation is one in which both sides of the equation have the same number of atoms.

In chemistry, what is a limiting reagent?

The reactant that is consumed first in a chemical reaction, also known as the limiting reagent, limits the amount of product that can be produced.

Learn more about chemical equation:

brainly.com/question/23877810

#SPJ1

When a student squeezes a balloon, it changes shape. In which state of matter is the substance inside the balloon?
A. It could be either a liquid or a gas, because these states can change shape.
B. It could only be a liquid, because only liquids can change shape
C. It could only be a gas, because only gases can change shape.
D. It could not be a liquid or a solid, because neither of these states can change shape.​

Answers

The answer is A.
If you think about it, you have two balloons, a helium filled ballon and a water balloon. When you squeeze them, they will change shape. So yes liquid and gas changes. So you can cross out B and C. Now let’s look at D. D says it could not be a liquid or solid because neither can change. Well we just said liquid can change. But half of D is correct, solid cannot change shape. Think about a frozen water balloon. It’s ice instead of water on the inside. (I’m not sure if it’s even possible to have a frozen water balloon.) if you squeeze that ice balloon, it won’t change.

which size of micropipette would you select to deliver 215 microliters?

Answers

A micropipette of size P1000 (can read upto 1ml) would be required or selected to deliver or transfer 215 microliters of liquid.

A micropipette is an instrument used to transfer small amounts (<= 1 ml) of liquids. The scales on a micropipette are in microliters (1000µl = 1 ml). These are very delicate and expensive instruments costing between $150-300 a piece. These instruments come in three sizes which are capable of pipetting three ranges of volumes:

P20 type can transfer liquids between the range of 5- 20 µl,

P200 type can transfer liquids between the range of 20-200 µl, and

P1000 type can transfer liquids between the range of 200-1000 µl.

These instruments are used in conjunction/simultaneously with disposable and often sterile plastic tips.

A fixed volume micropipette is a pre-set instrument to measure only a specific volume. Although the volume transferred/delivered by a given pipet cannot be changed, this pipet is operated analogously to the variable micropipette. A fixed volume micropipette often does not have a tip ejector button, so the tips are to be removed manually while the required steps of the process.

It is of utmost importance to use the correct pipettor available for the volume that is to be dispensed. As going below or above the range provided for a micropipette, may damage the instrument.

Thus, a micropipette of type P1000 only should be used to deliver any liquid of volume 215 microliters.

Learn more about micropipette here:

https://brainly.com/question/23793716

#SPJ4

How would I balance this?

Answers

The balanced chemical equation is as follows:

4KClO₃ ₍s₎ ⇒ 3KClO₄ ₍s₎ + 3KCl

What is balance chemical equation ?

The term balanced chemical equation is defined an equation where the number of atoms of each type in the reaction is the equal on both reactants and product sides.

The chemical equation must be balanced in order to obey the law of conservation of mass. When the number of different atoms of elements in the reactants side equals the number of atoms in the products side, the chemical equation is balanced.

Thus, The balanced chemical equation is as follows:

4KClO₃ ₍s₎ ⇒ 3KClO₄ ₍s₎ + 3KCl

To learn more about the balanced chemical equation, follow the link;

https://brainly.com/question/28294176

#SPJ1

what effect does the coriolis effect have on global winds?

Answers

The Earth's rotation means that we experience an apparent force known as the Coriolis force. This deflects the direction of the wind to the right in the northern hemisphere and to the left in the southern hemisphere.

What is coriolis force?

The Coriolis effect describes the deflection pattern of objects that are not firmly attached to the ground as they travel long distances around the Earth. This effect is responsible for many large-scale weather patterns.The key to this effect lies in the Earth's rotation. Specifically, the Earth rotates faster at the equator than at the poles.

To know more about ccoriolis force, click the link given below:

https://brainly.com/question/29801913

#SPJ4

How many mL of butane would you
add to hexane to make 750 mL of a
25.0% by volume butane solution?

Answers

In order to create a 750 mL solution that is 25.0% by volume butane, hexane must have 1.8891687657 mL of butane added to it.

How can the quantity of solute required to create a solution be calculated?

Given that water has a density of 1 g/ml, the following equation can be used to determine how much solute need be added to create a solution with a weight percentage, grams of solute are calculated as follows (wt% solution) x (ml of water) (100 - wt% solution)

% of Volume, When a solute's volume and a solution's volume are both known, the concentration of the solution is expressed as a volume percent: Volume%=Volume of Solute The solution's volume is 100% Se.

Grams of solute are calculated as follows (wt% solution) x (ml of water) (100 - wt% solution).

Explanation:

(25% * 750)/(100 - 25%)

(0.25 * 750) / (100 - 0.25)

187.5 / 99.25 = 1.8891687657.

To learn more about Volume of a solution refer to:

https://brainly.com/question/19379932

#SPJ1

Answer: 190

Explanation: 190/750 = 0.25333333333

Why i carbon an element and not a compound?

All carbon atom have the ame number of proton. Carbon bond eaily with oxygen, but not helium. Carbon i found in all living organim. All carbon atom have the ame number of electron

Answers

Carbon is an element and not a compound because a) all carbon atom have the same number of protons.

Carbon is an element and not a compound because all of its atoms have the same number of protons.

This unique characteristic sets it apart from compounds, which are made up of two or more different types of atoms.

Carbon's atomic structure is composed of a nucleus surrounded by electrons and protons.

The nucleus is made up of protons and neutrons, and the protons determine the element's identity. Because all carbon atoms have six protons, they are all the same element.

To learn more about carbon, click here:

https://brainly.com/question/22530423

#SPJ4

A buffer is made by dissolving HC2H3O2 and NaC2H3O2 In water.
a) Write an equation that shows how this buffer neutralise added acid
b) Write an equation that shows how this buffer neutralises added base

Answers

A buffer is made by dissolving HC₂H₃O₂ and NaC₂H₃O₂ In water. The equation that shows how this buffer neutralise  acid added is

H⁺ + CH₃COO⁻ ⇄ CH₃COOH. The equation that shows how this buffer neutralises added base is H⁺ +OH⁻  ⇄ H₂O

Processes of dissociation in the solution containing weak CH₃COOH acid and its salt:

CH₃COOH ⇄ H⁺ + CH₃COO⁻                   Ka = 1.8 X 10⁻⁵

CH₃COONa ⇄ Na⁺ + CH₃COO⁻

At addition of acid in solution ions of hydrogen comunicate in weak acid:

H⁺ + CH₃COO⁻ ⇄ CH₃COOH.

At addition of the basis in solution ions of hydroxide comunicate in weak electrolyte - water: H⁺ +OH⁻  ⇄ H₂O

Therefore, the equation that shows how this buffer neutralise  acid added is H⁺ + CH₃COO⁻ ⇄ CH₃COOH. The equation that shows how this buffer neutralises base added  is H⁺ +OH⁻  ⇄ H₂O

Learn more about buffer at https://brainly.com/question/17350370

#SPJ4

A football player runs in a straight line down the field, crossing the 20-yard line when the stopwatch reads 12 seconds and crossing the 70-yard line when the stopwatch reads 17 seconds. What is his speed in yards per second?

Answers

Answer: 10y/s

Explanation:

According to the law of conservation of mass, which statement about chemical reactions is always true?(1 point)
Responses

The number of molecules in the reactants is the same as the number of molecules in the products.
The number of molecules in the reactants is the same as the number of molecules in the products.

The number of substances in the reactants is the same as the number substances in the products.
The number of substances in the reactants is the same as the number substances in the products.

The number of atoms of each element in the reactants is the same as the number of atoms of each element in the products.
The number of atoms of each element in the reactants is the same as the number of atoms of each element in the products.

The states of the substances in the reactants is the same as the states of the substances in the products.

Answers

According to the law of conservation of mass, Statement A. The number of atoms of each element in the reactants is the same as the number of atoms of each element in the products is true about chemical reactions.

What is the law of conservation of mass?

The law of conservation of mass is a model indicating that matter cannot be created or destroyed, but it can be changed from one form to another.

Therefore, with this data, we can see that the law of conservation of mass indicates that the total mass of the system or number of atoms remains constant over time.

Learn more about the law of conservation of mass here:

https://brainly.com/question/1992248

#SPJ1

What is temperature?
A. Electromagnetic waves
B. The measure of an object's "hotness"
OC. A type of heat transfer
D. The energy transferred between objects

Answers

Answer:

the measure of an object s hotness

As the temperature of a gas at 500 K is changed to 380 K at constant pressure, will the
volume of gas increase, decrease, or remain the same? Explain why in terms of how the
molecules are moving.

Answers

The movement of atomic or molecular building blocks in a certain direction is referred to as molecular motion.

What makes the molecules move?

The movement of atomic or molecular building blocks in a certain direction is referred to as molecular motion. Temperature and heat both have an impact on molecular mobility. This is so because the measurement of temperature, which reflects molecular motion and average kinetic energy, is used to determine molecular motion.

The atoms and molecules of a substance accelerate as it is heated. It doesn't matter if the substance is a solid, liquid, or gas; this still occurs. We'll attempt it with a liquid and a gas instead because it's harder to see it happen in a solid. See if you can identify the movement of molecules caused by heat.

To learn more about molecules move refer to:

https://brainly.com/question/22690377

#SPJ1

29. Identify which is a property of nonmetals *
good insulator
good conductor of electricity
have luster
Omalleable
(2 Points)

Answers

Answer:

Omalleable

Explanation:

Non-metals are very brittle, and cannot be rolled into wires or pounded into sheets. Conduction: They are poor conductors of heat and electricity. Luster: These have no metallic luster and do not reflect light.

A sample of gas has a volume of 2.0 L at a temperature of 0°C. When the volume is
increased to 4.0 L at constant pressure, what is the new temperature?

Answers

This is an illustration of Boyle's law, which states that when mass and temperatures are held constant, a gas's volume changes inversely with pressure at 0.05 atm.

What is the fundamental idea behind Boyle's law?

According to Boyle's law, pressure and volume of a gas are always inverse proportion at a specific temperature. It states that the pressure inside the lung will drop as the size of the lungs expands during inhalation.

Which scenario best illustrates Boyle's Law?

When you inflate your bicycle tires, you can see how Boyle's Law is used in practice. The gasses inside a tire are squeezed and crammed closer together when air is pumped into it. This raises the gas's pressure, and It starts to press up against the tire walls.

To know more about Boyles law visit:

https://brainly.com/question/1437490

#SPJ1

one mole of magnesium has the same number of atoms as one mole of lithium. True/False ?

Answers

True. That is because every element has 6.022 x 10^23 atoms/particles in one mole.

Soil erosion is a problem that is caused by many different factors. What can humans do to prevent soil erosion? To address this question, first think locally. What industries and businesses in your area may contribute to the erosion problem? What could be done to reduce these contributions? What happens in your state? What happens in your country? Once you have ideas about what can be done, who should be responsible for carrying out these actions? Should the government regulate these activities? Should individual companies take responsibility?

Answers

humans can prevent soil erosion by planting shrubs and grass, adding rocks to the ground and Constructing retaining walls.

What is soil erosion?

Erosion is a surface process that involves the removal of soil, rock, or dissolved material from one area on the Earth's crust and the subsequent transport and depositing of the material at a different location. Weathering doesn't involve movement, unlike erosion, which does.

The two main drivers of erosion, wind and water, can easily carry bare soil away. While their leaves deflect rain and prevent it from tearing the earth apart, plant roots retain the soil together. this is why planting shrubs and cover crops is very important in preventing soil erosion.

Learn more about erosion here https://brainly.com/question/26766508

#SPJ1

After a recrystallization, a pure substance will ideally appear as a network of?

Answers

When observed under a microscope, an impure substance is a non-homogeneous mixture in which some components have various colours or textures.

A process called recrystallization is used to clean an impure chemical in a solvent. The idea put forward here is that as temperature rises, most solids become more soluble. The process of fractional crystallisation is also known as recrystallization. A pure substance should ideally show up as a network of big crystals after recrystallization. If not, it might be beneficial to reheat the flask and let the contents cool more gradually. The appearance of the pure substances is homogenous A homogeneous combination (a pure substance) manifests as regularity. For example, a pure substance will have the same colour or texture on all sides, regardless of its size, when viewed. Steel and pure water are two examples of pure things.  

Learn more about Recrystallization here:

https://brainly.com/question/20912804

#SPJ4

please help me!!!! 26 pointz

Answers

Answer:

Electron = negative; Proton = positive; Neutron = no charge

Explanation:

5xy=9
15x3y=27 Determine if the following ytem of equation ha no olution, infinitely many olution, or exactly one olution

Answers

The equations will have only one solution.

The y-coefficients are opposites, so you can eliminate the y-variable by adding the equations:

 (2x -y) + (3x +y) = (2) + (-6)

 5x = -4

 x = -4/5 = -0.8

Substituting this into the second equation, we have ...

 3(-0.8) +y = -6

 y = -3.6 . . . . . . . add 2.4 to both sides

The solution is (x, y) = (-0.8, -3.6).

What is an equation?

The word equation and its cognates in other languages ​​can have subtly different meanings; for example, in French, an equation is defined as containing one or more variables,

To know more about equations, click the link given below:

https://brainly.com/question/12788590

#SPJ4

PLEASE HURRY!!

Question- Convert the 3.40 x 1022 formula units of table salt, NaCl, to its mass in grams.
Answers:
A. 0.0565 g NaCl
B. 58.4 g NaCl
C. 3.30 g NaCl
D. 6.02 g NaCl

Answers

To solve this we must be knowing each and every concept related to mole.  Therefore, the correct option is option C among all the given options.

What is mole?

A mole is merely a measuring unit. In reality, it is one of International System of Units' seven foundation units (SI). When basically determines are insufficient, new units are created.

Chemical reactions frequently occur at levels that use grams would be inappropriate, but using actual figures of atoms/molecules/ions would also be misleading.

It's much easier to write' mole' than '6.02x10²³' whenever you wish to refer to a huge number of things. That is essentially why and how this particular component was created.

number of mole =given number of atoms ÷ 6.022×10²³(Avogadro number)

number of atoms = 3.40 x 10²² atoms

number of mole=3.40 x 10²² ÷ 6.022×10²³

                         =0.056moles

mass of NaCl=0.056moles ×58.44

                     =3.27g

Therefore, the correct option is option C among all the given options.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ1

Rank these acids according to their expected pKa values.ClCH2COOHClCH2CH2COOHCH3CH2COOHCl2CHCOOH

Answers

The expected pKa values of the acids listed, in increasing order, are:

Cl2CHCOOH < ClCH2COOH < CH3CH2COOH < ClCH2CH2COOH

The pKa value is a measure of the acidity of a substance and is defined as the negative logarithm of the acid dissociation constant (Ka). A lower pKa value indicates a stronger acid, as it dissociates more readily in water to release hydrogen ions.

The alkyl chain length and the presence of functional groups can influence the pKa value of an acid. In this case, the longer the alkyl chain, the higher the pKa value.

Therefore, The expected pKa values of the acids listed, in increasing order, are:

Cl2CHCOOH < ClCH2COOH < CH3CH2COOH < ClCH2CH2COOH

To know more about pKa refer to:

brainly.com/question/13178964

#SPJ4

a student begins the boiling point determination, for the oil bath they turn on the hot plates heat but forget to turn on the stirrer. what will happen?

Answers

The water is gonna heat up from the bottom up when you stir it, it lets the water heat up uniform.

In general, stirring helps in spreading of heat evenly in the mixture. the solid present inside disturb the evenness of heat in water. During the process of heating, an fundamental stream of bubbles or air is expelled and then, a little later, a rapid and continuous stream of bubbles emerges out of the inverted capillary tube. During this stage it stops heating. Very soon the stream of bubbles will slow down and stop.

If you will not stir the mixture the substance substance may get burned due to the high amount of heat supplied. Stirring can also be used when their is a need to mix the substance with a solvent properly.

To learn more about Stirring  , here

brainly.com/question/9655111

#SPJ4

scientists have reached a key milestone in learning how to reverse aging

Answers

The given statement "scientists have achieved a core milestone in learning how to reverse aging" is true because scientific research has explored that lifestyle interventions, such as proper and healthy diet, supplements and exercise can reverse aging.

Scientific analyses reveal that lifestyle interventions, including proper diet, routine exercise, and supplements can reverse aging people. For instance, in one of the studies, people were put on a healthy diet, had to take certain supplements, and exercised. After eight weeks of following the plan, their epigenetic age was found to be reversed by almost two years.

Thus the given statement is true because it correctly specifies that scientists have achieved a key milestone to reduce aging.

"

Complete question

scientists have reached a key milestone in learning how to reverse aging

True

False

"

You can learn more about Scientific studies at

brainly.com/question/28145780

#SPJ4

The positively charged center of the atom consisting of protons and neutrons is called

Answers

It’s called the nucleus

Which of the following is reduction reduction reaction? A. 2Mg(s)+O2→2Mg(s)B. S(s)+O2(g)→SO2(g)C. 2HgO(s)→2Hg(l)+O2(g)D. Mg(s)+S(s)→MgS(s)

Answers

The reduction reaction is given as :

2Mg  +  O₂   --->  2MgO2HgO  ---->  2Hg  +  O₂Mg  +  S   --->   MgS

The reduction reaction is the reaction in which the addition of the hydrogen takes place and the addition of the electropositive element and the removal of the oxygen or any of the electronegative atom.

The reduction reaction is given below as :

2Mg  +  O₂   --->  2MgO2HgO  ---->  2Hg  +  O₂Mg  +  S   --->   MgS

The gain of the electron is also called as the reduction reaction. The one which is reduce will acts as a oxidizing agent.

To learn more about reduction reaction here

https://brainly.com/question/9029792

#SPJ4

A general formula for a double-displacement reaction is written as:

Answers

General formula of double displacement reaction is:

AB + CD = AD + BC where AB and CD are the displaced reactants.

A double displacement reaction occurs when two reactants exchange ions to form two new compounds. Double displacement reactions usually result in the formation of a precipitate as a product.

Precipitate is typically formed as a result of a double displacement reaction.

The two types of bonds that exist between the reactants can be covalent on ionic in nature.

The other name for a double displacement reaction is salt metathesis reaction.  It is an exchange reaction, or we can say a double decomposition reaction when one or more of the reactants does not dissolve in the solvent.

The simplest way to identify a double displacement reaction is to see if the cations exchanged anions with each other. If the states of matter are mentioned, look for aqueous reactants and the formation of a single solid product.

Learn more about displacement reactions here:

https://brainly.com/question/29794138

#SPJ4

Determine where each type of cleaning solution should be discarded after use.Water used to rinse detergent out of a flask _____ sink or waste containerSolvet used to rinse chemicals out of a beaker_____ sink or waste containerAcid solution used to clean a crucible___________ sink or waste container

Answers

Water used for washing purposes can be discarded into the sink as it does not affect the water pollution.

But in the case of organic solvent and acid solution they can be discarded into waste containers for proper disposal.

As we know that organic solvent and acid solution are hazardous for aquatic life. Their discopsal is a major concern.

What is water?

Water, a substance composed of the chemical elements hydrogen and oxygen and existing in gaseous, liquid and solid states. It is one of the most abundant and basic compounds. At room temperature, the tasteless and odorless liquid has an important ability to dissolve many other substances.

To know more about water, click the link given below:

https://brainly.com/question/17435626

#SPJ4

Why the small community of Mount Laguna, California, just 55 miles from San Diego much colder than San Diego ?

Answers

Answer: It all boils down to the two cities' proximity to the Pacific Ocean, along with wind currents and geographical location

Explanation: It is known throughout the whole scientific community that a body of water near a city produces very stable temperatures throughout the year with small dips. When it is summer, instead of San Diego boiling in the heat, the Pacific absorbs most of this heat, making the heat in the city tolerable (almost), this makes the ocean appear cold in the summer.

When it turns to winter, the heat absorbed by the ocean in the summer gets radiated making the cold in San Diego negligible. Applying this same logic to Mount Laguna, which is not near a body of water, it can be understood that it would have more extreme temp. swings.

Along with water, there is wind currents. I don't live in Mount Laguna, but I have to assume from the context you gave me that a cold wind current usually flows there, making it colder than in San Diego, which has a warm current.

The location also matters, if this town is under a valley, canyon, or mountain it could be under a shadow further decreasing the temp. more than San Diego.

Hopefully this helps, and good luck!

Other Questions
65. Explain how each of the two ways listed below assist in controlling computer. 1installing antivirus 2using firewall Choose the expression that is equivalent to the expression shown below. n/4+n/4+n/4+n/4 Consider a simplified program, where we can ONLY draw circles and rectangles on the canvas (no need to consider other shapes). Choose one of these languages: C++/C#/Java, and write down some pseudo-codes (i.e. doesnt need to be grammatically accurate) for the following questions.1. Define two classes for a Circle and a Rectangle. For both classes, we would also like to know where the center of the circle/rectangle is, and be able to get the area of the circle/rectangle.2. Obviously, these two classes share some common "characteristics". Define a "Shape" class that encapsulates these common characteristics. What is the name of the relationship between the Rectangle/Circle class and Shape class, and what do you need to change about your codes in Q1? Also, why do we want/need the "Shape" class at all?3. Should you be able to draw an "unspecified" Shape on the canvas? Or does it have to be a rectangular or circle? What does this mean about the Shape class? Hint: Im looking for the word "abstract" in your answer.4. Also note that, the Shapes above all have colors, fills, shades, outlines, etc. To simplify it, lets combine all of these aesthetic elements of the Shape into one thing, and call it the "Style" of the Shape. If we want to include these information, what changes would you need to make to your previous codes?5. Should Style be its own class? (Hint: yes). What is the relationship between Shape and Style in your code/design? Hint: your answer should be one or more of the following: association, aggregation, composition, inheritance.6. Now, the user wants to draw something on the canvas. There are many ways to do this, but lets follow this method: there is a Canvas class, with a "draw" function. The user decides upon the shape first, then clicks on the canvas, and the "draw" function is called, and the shape shows up on the canvas. Write the sketch codes for the Canvas class and the "draw" function in this scenario.7. Whats the relationship between Canvas and Shape: association, aggregation, composition, inheritance? Compare this relationship to the relationship between Shape and Style, what are the differences, if there are any? Explain what would happen to the Shape instances on a Canvas instance, when you delete a Canvas instance?What would happen to the "Style instances" when you delete a Shape instance? (20pts) What is inverse 2x2?. Find a contagious disease and describe the pathogen that causes it, describe the symptoms and how it is spread. Find out if there is a cure or treatment for the disease. List at least one activity that a company might do during each of the following stages of business: (a) Identify (0.5 points) (b) Plan (0.5 points) (c) Start (0.5 points) (d) Operate (0.5 points) How might the influence of the protestant reformation and the scientific revolution have contributed. a polymorphic virus changes its internal code to one of a set number of predefined mutations whenever it is executed. True or False The branch of systematic geography concerned with how people support themselves, with the spatial patterns of production, distribution, and consumption of goods and services, and with the areal variation of economic activities over the surface of the earth, are definition of The ideas of Enlightenment philosophers, as reflected in revolutionary documents including the American Declaration of Independence during the American Revolution, the French "Declaration of the Rights of Man and of the Citizen" during the French Revolution, and Bolvars "Letter from Jamaica" on the eve of the Latin American revolutions influenced resistance to existing political authority, often in pursuit of independence and democratic idealsNewly imagined national communities often linked this new national identity with borders of the state, and in some cases, nationalists challenged boundaries or sought unification of fragmented regions.Call for national unification or liberation: Propaganda Movement in the PhilippinesMaori nationalism and the New Zealand wars in New ZealandPuerto Ricowritings of Lola Rodrguez de TiGerman and Italian unificationsBalkan nationalismsOttomanism what is 345 divided by 2:3 Please need help on this What is the most famous line from The Shining?. determine the displacement (in m) of the object after a time of 6 seconds. (if negative, then enter a negative answer.) The ethical action is the one that treats people equally, or if unequally, thattreats people proportionately and fairly. Which option would help all participate more fully in the life we share as a family, community, society? An electron (mass 9.11 x 10-31 kg) traveling with a horizontal speed v = 4.00 x 106 m/s, enters a uniform electric field created by two charged parallel plates. The electron enters at the edge of the lower plate, and travels at an angle of 300 above horizontal, but is deflected toward the lower plate: The electron travels a horizontal distance of 5.00 cm before hitting - the lower plate: a) How long does it take the electron to hit the lower plate, from the time the electron enters the electric field? [1] b) What is the magnitude of the acceleration of the electron? [1] c) What is the magnitude of the electric field between the plates? [1] d) What is the direction of the electric field? [1] 300 morphine can be reversed by how would having too much sample in the melting point tube most likely affect a melting point measurement? what is the best malware cleaner to use in addition to a security program for chrome What is a good thesis statement example for an argumentative essay?.