The 225 g FeCl2 is about 1.8 moles.
What is the molar concentration of
the solution if the total volume is
450 mL?
Answers
Answer:
[tex]4 \frac{mol}{l} [/tex]
Explanation:
From the question, we have been asked to find the molarity of FeCl2 having a volume of 450 mL,
We have been provided with 225 g which is proportional to 1.8 moles.
We know that molarity of any solution should be in mol/L.
1 mole contained in 1 L means it has a molarity of 1 mol/L
Let's convert 450 mL to Litres which is,
[tex] \frac{450}{1000} litres[/tex]
= 0.450 L
Thus,
1 mole is contained in 1L
x moles are contained in 0.450 L
Hence,
x mole/molarity = {1 mole x 1 L}/{0.450 L}
= 4 mol/L
Therefore 4 mol/L is the molar concentration.
Related Questions
Nitrogen monoxide (NO) is a pollutant known to
destroy the ozone layer. Nitrogen monoxide reacts
with ozone molecules (0,) to release oxygen and
a nitrogen-containing compound Q. Given that one
molecule of nitrogen monoxide reacts with one
molecule of ozone to produce one molecule of
of Q.
oxygen and one molecule of Q, identify the formula.
Answers
Answer:
See below
Explanation:
NO + O3 ====> NO2 + O2 (ozone is O3)
8.0 mol AgNO3 reacts with 5.0 mol Zn in
a single replacement reaction.
2AgNO3 + Zn → 2Ag + Zn(NO3)2
How many moles of Ag form from 8.0
mol AgNO3?
[?] mol Ag
Round your answer to the tenths place.
Answers
Taking into account the reaction stoichiometry, 8 moles of Ag can be produced from 8 moles of AgNO₃ and 5 moles of Zn.
Reaction stoichiometryIn first place, the balanced reaction is:
2 AgNO₃ + Zn → 2 Ag + Zn(NO₃)₂
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
AgNO₃: 2 moles Zn: 1 mole Ag: 2 moles Zn(NO₃)₂: 1 moleLimiting reagentThe limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.
Limiting reagent in this caseTo determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 1 mole of Zn reacts with 2 moles of AgNO₃, 5 moles of Zn reacts with how many moles of AgNO₃?
[tex]amount of moles of AgNO_{3}= \frac{5 moles of Znx2 moles of AgNO_{3}}{1 mole of Zn}[/tex]
amount of moles of AgNO₃= 10 moles
But 10 moles of AgNO₃ are not available, 8 moles are available. Since you have less moles than you need to react with 5 moles of Zn, AgNO₃ will be the limiting reagent.
Moles of Ag formedConsidering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 2 moles of AgNO₃ form 2 moles of Ag, 8 moles of AgNO₃ form how many moles of Ag?
[tex]amount of moles of Ag=\frac{8 moles of AgNO_{3}x2 moles of Ag }{2 moles of AgNO_{3}}[/tex]
amount of moles of Ag= 8 moles
Then, 8 moles of Ag can be produced from 8 moles of AgNO₃ and 5 moles of Zn.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
A sample of pure nitrogen has a temperature of 15°c. What is the temperature of the nitrogen in units of kelvin?
Answers
The temperature of the nitrogen in units of kelvin is 288 kelvin
How to convert the temperature of nitrogen from degree Celsius to kelvin?The sample of pure nitrogen has a temperature of 15 degree Celsius.
Let's convert the temperature from degree Celsius to kelvin.
K = C + 273
where
K = temperature in kelvinC = temperature in degree Celsius.Therefore,
K = 15 + 273
K = 15 + 273
K = 288 kelvin
learn more on nitrogen here: https://brainly.com/question/13870292
#SPJ12
Justify that the shielding effect of an atom remain constant in a period but atomic size gradually gets smaller (chemistry)
Answers
Atomic size decreases across a period because but the positive charge of the nucleus gets increases across a period.
What is the shielding effect?The shielding effect is the shielding from the pulling force of the positively-charged nucleus given to. the outermost shell electrons by the inner electrons.
Since the shielding effect remains constant across a group but the positive charge of the nucleus gets bigger, atomic size decreases across a period.
Learn more about shielding effect at: https://brainly.com/question/19068425
#SPJ1
which trends increase to the lower left: metallic character, non-metallic character, atomic radius, ionization energy, electronegativity?
Answers
Metallic character increase to the lower left of the periodic table.
What is periodicity?Periodicity is the regular variation in the properties of an element across a period and down a group.
The following properties of elements show periodicity:
metallic character,non-metallic character,atomic radius, ionization energy,electronegativityThe properties that shows increasing trend to The lower left of the periodic table is metallic character.
Learn more about periodicity at: https://brainly.com/question/14227831
#SPJ11
how do we compare the PH of a weak acid and a strong acid of identical concentration and draw a conclusion about the concentration of hydrogen ions?
Answers
Answer:
This means that the pH values of strong acids are lower than that of weak acids, which explains why the rate of reaction of strong acids with substances (such as metals, metal carbonates etc) is higher than that of weak acids.
Explanation:
welcome
Which of the following equations represents a nuclear charge?
A) H2O(s) + Heat --> H2O(I)
B) H2CO3(aq) --> H2O(I) + CO2(g)
C) 14 14 0
C --> N + e
6 7 -1
D) H2CO3(aq) + Ca(OH)2(aq) --> CaCO3(s) + 2 H2O(I)
Select one:
a. A
b. B
c. C
d. D
Answers
The ideal gas law only approximates the behaviour of real gases. The conditions
under which the ideal gas law is MOST accurate are
a. Low pressure and high temperature
b. Low pressure and low temperature
c. High pressure and high temperature
d. High pressure and low temperature
Answers
7.0 mol Mn reacts with 5.0 mol
O2 according to the equation below:
2Mn + O₂ → 2MnO
How many moles of MnO form from
5.0 mol Mn?
[?] mol MnO
Round your answer to the tenths place.
Answers
5 moles of MnO form from 5.0 mol Mn. Details about stoichiometry can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated stoichiometrically as follows:
According to this question, the following chemical equation is given as follows:
2Mn + O₂ → 2MnO
2 moles of Mn forms 2 moles of MnO
Hence, 5 moles of Mn will form 5 × 2/2 = 5 moles of MnO.
Therefore, 5 moles of MnO form from 5.0 mol Mn.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
Answer: 10.0
Explanation: i took the test
Heat _____.
can only betransferredif molecules are touching
is always created by friction
is a type of potential energy
is the same as temperature
Answers
increasing the airplane's speed or wing size does which of the following
a) decreases the amount of drag on the plane
b) increases the gravitational pull on the pane
c) generates more lifting force
d) creates a sonic boom
Answers
Answer:
increases the gravitional pull on tge pane
Answer:
generates more lifting on the plane
Explanation:
the difference between cow stomach and human stomach
Answers
The primary distinction between the digestive systems of cows and humans is that the former uses a foregut fermenter while the latter uses a straightforward monogastric digestion. The types of teeth, mouths, stomachs, guts, and digestive enzymes released by the gut also vary between the two digestive systems. Cows and humans have different digestive systems because they have evolved two different sorts of dietary patterns based on their capacities. The primary distinctions between the digestive systems of cows and humans are in the types of teeth, mouths, stomachs, and intestines, as well as the enzymes released.
Answer:
The main difference between cow and human digestive system is that cow exhibits a foregut fermenter digestion whereas human exhibits a simple monogastric digestion. Both digestive systems also differ by the type of teeth, mouth, stomach, gut, and digestive enzymes secreted by the gut.
Explanation:
IB Chemistry SL Question - Empirical/Molecular formulae
A 4.406g sample of a compound containing only C, H and O was burnt in excess oxygen. 8.802g of CO2 and 3.604g of H2O were produced.
i) Determine the empirical formula of the compound (section 6 of the data booklet)
ii) Determine the molecular formula of this compound if its molar mass is 88.12gmol-1
Answers
Answer:
(i)
Explanation:
is it right
brainliest?
Suppose you add a cup of sugar to hot water and all of the sugar dissolves. then the water cools and some of the sugar is seen as a solid on the bottom of the beaker. explain why this happened.
Answers
Answer:
its becuz the water is not capable to disolve all the salt it has limits and ones it reaches its limit it wont have the ability to disolve any salt
Specialized periodicals in which scientists publish the results of their works are called
Answers
Specialized periodicals in which scientists publish the results of their works are called scientific journals.
In educational publishing, a scientific journal is a periodical book intended to similarly the progress of technology, typically by way of reporting new studies.
Journal articles may include original research, re-analyses of studies, opinions of literature in a selected place, proposals of new but untested theories, or opinion pieces.
These scientific journals include the following.
original articles, case reports, technical notes, pictorial essays, reviews, commentaries editorials.Learn more about scientific journals here https://brainly.com/question/14443228
#SPJ10
Find the ratio of the volume divided by the
temperature for the first data pair. Use significant
figures.
V/T=0.72/276= 0.002 ✓
COMPLETE
Now do the same computation for all six pairs of
values. What is the average of all six fractions V/
T?
Answers
From the pair of values given, the ratio of the volume to the temperature for the first data pair is, 0.0026 cm³/K
What is a Ratio?A ratio is a comparison between two quantities showing how much one quantity differs from another.
From the data given, the first data pair is as follows ;
Temperature = 276 KVolume = 0.72 cm³Ratio of volume to temperature = volume / temperature
Ratio = 0.72 / 276
Ratio = 0.002608 cm³/K
The significant figure's rule for division is the least number of significant figures used in the operation.
The least significant figure of the values given is 2.
Therefore, the ratio of the volume to the temperature for the first data pair is 0.0026 cm³/K
Learn more about ratio here :
brainly.com/question/25927869
#SPJ1
Answer:
0.0026
Explanation:
edge 2022 it's the same answer for both parts
write the advantages of molecular formula
Answers
Answer:
Its main advantage is they information fits on one line of text (thus works well when using the formula in paragraphs). Disadvantages are they can be confusing for larger molecules
hope this helps :3
When methane, CH4, is combusted, it produces carbon dioxide, CO₂, according to the unbalanced equation: CH4 +0₂ - CO₂ + H₂O.
Write the balanced equation for this reaction, and explain how it is possible for 10 grams of methane fuel to burn and emit 27 grams of carbon dioxide. Discuss whether or not this reaction obeys the law
of conservation of mass. (5 points)
Answers
The balanced equation will be [tex]CH_4 + 2O_2 --- > CO_2 + 2H_2O[/tex]
Stoichiometric problemsThe balanced equation of the reaction would be as follows:
[tex]CH_4 + 2O_2 --- > CO_2 + 2H_2O[/tex]
The mole ratio of methane to carbon dioxide is 1:1.
10 grams of methane will give 10/16 = 0.625 moles
0.625 moles of carbon dioxide would give 0.625 x 44.01 = 27.506 grams.
Thus, 10 grams of methane will produce approximately 27 grams of carbon dioxide stoichiometrically.
The reaction obeys the law of conservation of mass because the atoms of all the elements before and after the reaction are balanced.
More on stoichiometric problems can be found here: https://brainly.com/question/14465605
#SPJ1
6. How many grams are present in 13.2 moles of O₂?
Answers
Answer:
422.3868 Grams
Explanation:
13.2 (MOLES) * 31.999 (Dioxygen's Molar Mass) = 422.3868 (Grams Present)
What is the change in freezing
point, ATf, when the 0.195 m
aqueous solution of K2S dissolves
into 3 particles?
Answers
The change in the freezing point of the solution is 1.1°C.
What is freezing point depression?The freezing point depression is a colligative property thus we must take note of the number of particles in solution.
Using;
ΔT = k m i
k = 1.86 °C/m
m = 0.195 m
i = 3
ΔT = 1.86 °C/m * 0.195 m * 3
ΔT = 1.1°C
Learn kore about freezing point:https://brainly.com/question/3121416
#SPJ1
Answer:
1.0881
Explanation:
Correct answer for Acellus
1s22s²2p63s23p64s²3d104p5
Which element is this?
Answers
Answer: bromine
Explanation:
There are a total of 2+2+6+2+6+2+10+5=35 electrons, meaning there are 35 protons. The element with atomic number 35 is bromine
Ascorbic acid (vitamin C) has the molecular formula C H₂O (molar mass = 176.12 g/mol) The recommended daily allowance of
ascorbic acid in the diet of a human adult is 0.045 g. How many molecules of ascorbic acid is this?
Select one:
1.54 x 10^20molecules
2.56 x 10^-4molecules
2.71x 10^22 molecules
4.77 x 10^24 molecules
Answers
Answer:
1.54 × 10²⁰ molecules
Explanation:
Dividing the mass by the molar mass, we get the number of moles to be (0.045)/(176.12), which is about 0.0002555 mol.
Avogadro's law states that there are 6.022 × 10²³ molecules in one mole of a substance, so the answer is
(0.0002555)(6.022 × 10²³), which is 1.54 × 10²⁰ molecules.
Why is aluminum considered a nonrenewable resource?
Answers
Considering the temperature vs. time graph below, how does the temperature at the beginning of a change of state
compare with the temperature at the end of the change?
Temperature vs. Time
140
120
100
80
60
Time (min) →
4
The temperature is always lower.
The temperature is always the same.
The temperature is usually lower.
The temperature is usually higher.
Temperature (°C)
Answers
The temperature is always the same.
How Temperature manifests in objects ?Assume we have something in solid phase. As we increase the temperature, the particles on the solid increase their kinetic energy, thus, the particles move more.
This causes that the volume of the object increases (for example when we heat up a metal and it dilates) and this keeps happening until we reach a critical point, when we are near a change of phase.
At this point the energy given is not used to increase the temperature of the object, but is used to "break" bonds in such a way that the particles are more free than before.
When all these bonds are "broken" the change of phase is completed, and in the case of the solid, we go from solid phase to liquid phase.
So, the temperature is always the same at the beginning of a change of state compare with the temperature at the end of the change
If you want to learn more about this read here ;
brainly.com/question/11804615
#SPJ1
Se prepara 0,150dm3 de solucion poh=11,20 a partir de 10,00cm3 de una solucion acuosa de hno3 (( m=63,0g/mol). la concentracion de la solucion concentrada expresada en %m/v es?
Answers
Answer:
Translate your language to English ok
When producing a soluble salt in a reaction between an acid and an alkali, how can you prepare dry solid crystals from the solutions
1)evaporation/crystallization
2)filtration
3)condensation
4)nuetralisation
Answers
Explanation:
Making a salt from an alkali
If you are using an alkali - which is a soluble base - then you need to add just enough acid to make a neutral solution (check a small sample with universal indicator paper).
Warm the salt solution to evaporate the water. You get larger crystals if you evaporate the water slowly.
10.5 mL of an unknown solution are diluted to 80.0 mL. The concentration of the
new solution was determined to be 0.172 M. What was the molarity of the
unknown solution? (Report your answer to two places past the decimal point.
Moodle is looking for a number only, no units.)
Answers
Taking into account the definition of dilution, the molarity of the unknown solution is 0.133 M.
DilutionDilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.
In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
A dilution is mathematically expressed as:
Ci×Vi = Cf×Vf
where
Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volumeInitial concentrationIn this case, you know:
Ci= ?Vi= 10.5 mLCf= 0.172 MVf= 80 mLReplacing in the definition of dilution:
Ci× 10.5 mL= 0.172 M× 80 mL
Solving:
Ci= (0.172 M× 80 mL)÷ 10.5 M
Ci= 0.133 M
In summary, the molarity of the unknown solution is 0.133 M.
Learn more about dilution:
brainly.com/question/6692004
brainly.com/question/16343005
brainly.com/question/24709069
#SPJ1
Ammonia gas occupies a volume of 450. mL at a pressure of 720. mm Hg. What volume will it occupy at standard pressure?
Show your work Please!!!!
Answers
V1 = 450 ml
P1 pressure equals 720 mmHg.
P2 is the standard pressure (1 atm is 760 mmHg).
V2 = the volume,
By applying Boyle's law,
P1V1 =P2V2V2 = P1V1/ P2
= (720 × 450) / 760V2
= 426 ml
426 ml is the volume at standard pressure.
Why did potato chunks a, b, and c gain mass here?
Answers
The most likely reason why the potato chunks gained mass is that water entered the potato cells.
How does water enter potato cells?The process of Osmosis allows water to pass through the semi-permeable membrane of potato cells.
This happens when the potato cells have less water than the material around them which then leads to water entering the cells to balance the water concentration.
The potato cells will expand and have more mass as a result.
Find out more on osmosis at https://brainly.com/question/2625460.
#SPJ12
After balancing the chemical equation what are the coefficients for these compounds
Answers
The cofficient of the [tex]\rm H_2S,HNO_3,NO,H_2O,S[/tex] willl be 3,2,2,4 and 3 respectively.
What is a chemical reaction?One or more compounds, known as reactants, are transformed into one or more distinct substances, known as products. Such a process is known as a chemical reaction.
The overall reaction is found as;
[tex]\rm H_2S +HNO_3 \rightarrow S+NO+H_2O[/tex]
Reduction reaction;
[tex]\rm N^{+5} + 3e^{-1} \rightarrow N^{+2}[/tex]
The oxidation half-reaction from the overall reaction is;
[tex]\rm S^{-2} = S+ 2e^{-1}[/tex]
Multiply the oxidation reaction by 2 and the reduction reaction by 3 and add them.
[tex]\rm 2 N^{+5}+6e^{-1}+3S^{-2} \rightarrow 2N^{+2}+3S+H_2O \\\\ 2N^{+5}+3 S^{-2}\rightarrow 2N^{+2}+3S \\\\ 3H_2S +2HNO_3 \rightarrow 3 S + 2NO + 4H_2O[/tex]
The cofficient of the [tex]\rm H_2S,HNO_3,NO,H_2O,S[/tex] willl be 3,2,2,4 and 3 respectively.
To learn more about the chemical reaction refer to the link;
https://brainly.com/question/22817140
#SPJ1
