The average price of a gallon of gas was $3. 22 and 2014 and $2. 40 in 2015 what is the percent decrease in the price of gas​

Answers

Answer 1

To calculate the percent decrease in the price of gas, we can use the following formula:

Percent decrease = ((Initial value - Final value) / Initial value) * 100

Let's substitute the values into the formula:

Initial value = $3.22

Final value = $2.40

Percent decrease = (($3.22 - $2.40) / $3.22) * 100

Simplifying the equation, we get:

Percent decrease = ($0.82 / $3.22) * 100

Calculating the division, we have:

Percent decrease = 0.254658 * 100

Rounding the result to two decimal places, we get:

Learn more about decrease here;

https://brainly.com/question/25677078

#SPJ11


Related Questions

A boat sails 285 miles south and
then 132 miles west.
What is the direction of the
boat's resultant vector?
Hint: Draw a vector diagram.
A-[21°

Answers

The direction of the boat's resultant vector is 65.15⁰.

What is the direction of the resultant vector?

The direction of the boat's resultant vector is calculated as follows;

Mathematically, the formula for resultant vector is given as;

θ = tan⁻¹ Vy / Vₓ

where;

θ is the direction of the resultant vectorVy is the resultant vector in y - directionVₓ is the resultant vector in x - direction.

The component of the boat's displacement in y-direction = 285 miles

The component of the boat's displacement in x-direction = 132 miles

The direction of the boat's resultant vector is calculated as;

θ = tan⁻¹ Vy / Vₓ

θ = tan⁻¹ (285 / 132 )

θ = tan⁻¹ (2.159)

θ = 65.15⁰

The vector diagram of the boat's displacement is in the image attached.

Learn more about direction of vectors here: https://brainly.com/question/3184914

#SPJ1

Rob borrows $15. 00 from his father, and then he borrows $3. 00 more. Drag numbers to write an equation using negative integers to represent Rob's debt and complete the sentence to show how much money Rob owes his father. Numbers may be used once, more than once, or not at all. 3 15–18–3–15 18 12–12

Answers

Rob owes his father $18.00. Rob initially borrowed $15.00 from his father, represented by -15. Then, he borrowed an additional $3.00, represented by -3. When we add these two amounts together (-15 + -3), we get a total debt of $18.00, represented by -18. Therefore, Rob owes his father $18.00.

To write an equation using negative integers to represent Rob's debt, we can use the numbers provided and the operations of addition and subtraction. The equation would be:

(-15) + (-3) = (-18)

This equation represents Rob's initial debt of $15.00 (represented by -15) plus the additional $3.00 borrowed (represented by -3), resulting in a total debt of $18.00 (represented by -18).

Therefore, the completed sentence would be: Rob owes his father $18.00.

learn more about debt here:
https://brainly.com/question/32103869

#SPJ11

The function x follows a generalized Wiener process, where dx = 3dt + 2dz, μ = 3 and σ = 2. If the initial value for x = 100, what is the mean and variance for x at the end of 5 years?Please show all work. Please use four decimal places for all calculations.

Answers

The mean of x at the end of 5 years is 115 and the variance is 20.0625. The function x follows a generalized Wiener process, where dx = 3dt + 2dz, μ = 3 and σ = 2.

Given that dx = 3dt + 2dz, where μ = 3 and σ = 2, we can integrate the differential equation to find the process x. Integrating both sides, we get:

∫dx = ∫(3dt + 2dz)

Integrating, we have:

x = 3t + 2z

Since we know that x starts at 100, we substitute t = 0 and z = 0 into the equation:

100 = 3(0) + 2(0)

Simplifying, we find:

100 = 0

This implies that the constant term of integration is 100. Therefore, the process x is given by:

x = 100 + 3t + 2z

To find the mean and variance of x at the end of 5 years, we substitute t = 5 and z = 0 into the equation:

x = 100 + 3(5) + 2(0)

x = 115

Thus, the mean of x at the end of 5 years is 115.

To find the variance, we use the fact that the variance of dx is given by σ^2 * dt. Since σ = 2 and dt = 5, the variance of dx is (2^2) * 5 = 20.

Therefore, the variance of x at the end of 5 years is 20.0625 (rounded to four decimal places).

Learn more about differential equation here:

https://brainly.com/question/31583235

#SPJ11

Use SCILAB to solve
Define the following matrix
C= 3 6 3 7 5 6 5 2 7
a)From a. above, show two methods of referencing the
element in the second column and the third row of the matrix C
(i.e. with the

Answers

To reference the element in the second column and the third row of the matrix C in SCILAB, you can use two different methods: indexing and matrix slicing.

1. Indexing Method:

In SCILAB, matrices are indexed starting from 1. To reference the element in the second column and the third row of matrix C using indexing, you can use the following code:

```scilab

C = [3 6 3; 7 5 6; 5 2 7];

element = C(3, 2);

disp(element);

```

In this code, `C(3, 2)` references the element in the third row and second column of matrix C. The output will be the value of that element.

2. Matrix Slicing Method:

Matrix slicing allows you to extract a subset of a matrix. To reference the element in the second column and the third row of matrix C using slicing, you can use the following code:

```scilab

C = [3 6 3; 7 5 6; 5 2 7];

subset = C(3:3, 2:2);

disp(subset);

```In this code, `C(3:3, 2:2)` creates a subset of matrix C containing only the element in the third row and second column. The output will be a 1x1 matrix containing that element.

Both methods will allow you to reference the desired element in the second column and the third row of matrix C in SCILAB.

Learn more about  SCILAB here: brainly.com/question/33168946

#SPJ11

The position of a particle in space at time t is rit) as shown below. Find the particle's velocity and acceleration vectors. Then find the particle's speed and direction of motion at t=2. Write the particle's velocity at that time as the product of its speed and direction.
r(t)=(3ln(t+1)ji+t2j+t2/4k

Answers

The particle's velocity vector at time t is v(t) = (3/(t + 1))j + 2tj + (t/2)k, and its acceleration vector is a(t) = -3/(t + 1)^2 j + 2j. At t = 2, the particle's speed is 2√2 and its direction of motion is along the vector (3/2)j + 4j + k. The particle's velocity at t = 2 can be written as v(2) = (2√2)(3/2j + 4j + k).

To find the particle's velocity vector, we take the derivative of the position vector r(t) with respect to time. Differentiating each component, we get v(t) = (3/(t + 1))j + 2tj + (t/2)k.

To find the particle's acceleration vector, we take the derivative of the velocity vector v(t) with respect to time. Differentiating each component, we get a(t) = -3/(t + 1)^2 j + 2j.

To find the particle's speed at t = 2, we calculate the magnitude of the velocity vector: ||v(2)|| = √(3^2/(2 + 1)^2 + 2^2 + (2/2)^2) = 2√2.

To find the direction of motion at t = 2, we normalize the velocity vector: v(2)/||v(2)|| = ((3/2)/(2√2))j + (4/2√2)j + (1/2√2)k = (3/2√2)j + (2/√2)j + (1/2√2)k.

Therefore, the particle's velocity at t = 2 can be written as v(2) = (2√2)(3/2j + 4j + k), where the speed is 2√2 and the direction of motion is given by the vector (3/2)j + 4j + k.

Learn more about velocity vector here:

https://brainly.com/question/13825135

#SPJ11

Solve by method of Laplace transform
with equation: y'' + y = 4δ(t − 2π)
where y(0) = 1, y'(0) = 0

Answers

The solution to the given differential equation is: y(t) = 4δ(t - 2π) + 2cos(t). To solve the differential equation using the Laplace transform, we first take the Laplace transform of both sides of the equation.

The Laplace transform of the second derivative y''(t) can be expressed as s^2Y(s) - sy(0) - y'(0), where Y(s) is the Laplace transform of y(t). Similarly, the Laplace transform of the delta function δ(t - 2π) is e^(-2πs).

Applying the Laplace transform to the differential equation, we get:

s^2Y(s) - s(1) - 0 + Y(s) = 4e^(-2πs)

Simplifying the equation, we have:

s^2Y(s) + Y(s) - s = 4e^(-2πs) + s

Now, we solve for Y(s):

Y(s)(s^2 + 1) = 4e^(-2πs) + s + s(1)

Y(s)(s^2 + 1) = 4e^(-2πs) + 2s

Y(s) = (4e^(-2πs) + 2s) / (s^2 + 1)

To find y(t), we need to take the inverse Laplace transform of Y(s). Since the inverse Laplace transform of e^(-as) is δ(t - a), we can rewrite the equation as:

Y(s) = 4e^(-2πs) / (s^2 + 1) + 2s / (s^2 + 1)

Taking the inverse Laplace transform of each term, we get:

y(t) = 4δ(t - 2π) + 2cos(t)

Note that the initial conditions y(0) = 1 and y'(0) = 0 are automatically satisfied by the solution.

Learn more about Laplace transform at: brainly.com/question/31689149

#SPJ11

A warranty is written on a product worth \( \$ 10,000 \) so that the buyer is given \( \$ 8000 \) if it fails in the first year, \( \$ 6000 \) if it fails in the second, and zero after that. The proba

Answers

GivenData: The cost of the product = $10,000The amount given to the buyer if the product fails in the first year = $8000The amount given to the buyer if the product fails in the second year = $6000The probability that a product fails in the first year = 150/1000.The probability that a product fails in the second year = 100/1000.

Find: a) Probability that it will fail in the third year Solution: Part A:As per the given data, The total probability of the product failure is 150 + 100 + 0 = 250.

The probability that a product fails in the first year = 150/1000 = 0.15 The probability that a product fails in the second year = 100/1000 = 0.1 Thus, the probability that a product does not fail in the first or second year is= 1 - (0.15 + 0.1) = 0.75Therefore, the probability that a product fails in the third year is 0.75.

Probability that it will fail in the third year = 0.75 b) Expected cost to the company in the first three years= Expected cost in the first year + Expected cost in the second year + Expected cost in the third yearThe expected cost to the company in the first year is 8000 * (150/1000) = $1200.

The expected cost to the company in the second year is 6000 * (100/1000) = $600.The expected cost to the company in the third year is 0 * (750/1000) = $0.So, the total expected cost to the company in the first three years is $1800 (1200+600+0). Hence, the expected cost to the company in the first three years is $1800.

Learn more about probability

https://brainly.com/question/31828911

#SPJ11

Find the area of the region enclosed by the graphs of y = e^x, y = e^-x, and y = 3. (Use symbolic notation and fractions where needed.)
A = _____________________

Answers

The area of the region enclosed by the graphs of y = e^x, y = e^-x, and y = 3 is approximately 4.95 square units, which is the final answer.

Given that the region enclosed by the graphs of y = e^x, y = e^-x, and y = 3.

The required area enclosed by the three given graphs can be obtained using integration.

Therefore, the expression for the area enclosed by the graphs is given by:

A = ∫_{a}^{b} (f(x) - g(x)) dx  .................(1)

where f(x) = 3, g(x) = e^-x, and g(x) = e^x.

To find the limits of integration, we equate e^x to 3 and solve for x as:

e^x = 3⇒ x = ln 3

Therefore, the limits of integration are a = −ln 3 and b = ln 3.

Substituting the given expressions into equation (1) and simplifying, we get:

A = ∫_{-ln3}^{ln3} (3 - e^x - e^-x) dx  .................(2)

Integrating the above expression by applying integration by substitution, we get:

A = [3x + e^x + e^-x]_{-ln3}^{ln3}

A = [3ln3 + e^{ln3} + e^{-ln3}] - [-3ln3 + e^{-ln3} + e^{ln3}]

A = [3ln3 + 3 + 1/3] - [-3ln3 + 1/3 + 3]

A = 3ln3 + 1/3 + 3ln3 - 1/3

A = 6ln3 = 4.95... ≈ 4.95

Therefore, the area of the region enclosed by the graphs of y = e^x, y = e^-x, and y = 3 is approximately 4.95 square units, which is the final answer.

To know more about area, visit:

https://brainly.com/question/16151549

#SPJ11

Explain the meaning behind the expression ∫C​F⋅dr, for a curve C and vector field F.

Answers

The line integral of a curve C and vector field F represents the amount of work done by the vector field F along the curve C.

The line integral of a curve C and vector field F is explained by the meaning behind the expression ∫CF⋅dr. Here is the explanation of this statement.

The expression ∫CF⋅dr is the line integral of a curve C and vector field F. It represents the summation of the dot products of the vector field F with the tangent vector of the curve C.

The line integral of a vector field F along the curve C can be calculated using the following formula:

∫C​F⋅dr=∫ab​F(r(t))⋅r′(t)dt,

where F(r(t)) is the vector field at r(t) and r′(t) is the tangent vector of the curve C. Here, a and b are the two endpoints of the curve C.

When a curve C and vector field F are combined to form a line integral, the outcome is a scalar. The direction of this scalar is determined by the orientation of the curve C. In general, the line integral of a curve C and vector field F represents the amount of work done by the vector field F along the curve C.

The line integral of a curve C and vector field F produces a scalar whose direction is determined by the orientation of the curve C. In general, the line integral of a curve C and vector field F represents the amount of work done by the vector field F along the curve C.

Thus, the expression ∫CF⋅dr, for a curve C and vector field F, represents the line integral of a curve C and vector field F. This is a scalar quantity that can be calculated using the formula

∫C​F⋅dr=∫ab​F(r(t))⋅r′(t)dt.

The direction of this scalar is determined by the orientation of the curve C.

In general, the line integral of a curve C and vector field F represents the amount of work done by the vector field F along the curve C.

To know more about vector visit

https://brainly.com/question/17108011

#SPJ11

what statement can be used to explain the steps of a proof?

Answers

A proof is a systematic and logical process used to establish the truth or validity of a mathematical or logical statement.

It consists of a series of well-defined steps that build upon each other to form a coherent and convincing argument.

Each step in a proof is carefully constructed, using previously established definitions, theorems, and logical reasoning.

The purpose of proof is to provide evidence and demonstrate that a statement is true or a conclusion is valid based on established principles and logical deductions. T

he steps of a proof are structured in a clear and concise manner, ensuring that each step follows logically from the preceding ones.

By following this rigorous approach, proofs establish a solid foundation for mathematical and logical arguments."

In essence, the statement highlights the systematic nature of proofs, emphasizing their logical progression and reliance on established principles and reasoning. It underscores the importance of constructing a coherent and convincing argument to establish the truth or validity of a given statement.

For more such answers on Proof

https://brainly.com/question/29969150

#SPJ8

For the points given​ below, find ​(a​) PQ and ​(b​) the coordinates of the midpoint of PQ . P(0,-1),Q(3,6)

Answers

a.The length of PQ is √58.

b. The coordinates of the midpoint of PQ are (3/2, 5/2).

To find the length of PQ, we can use the distance formula, which states that the distance between two points (x1, y1) and (x2, y2) is given by the square root of [tex][(x2 - x1)^2 + (y2 - y1)^2].[/tex]

Using this formula, we can calculate the length of PQ. The coordinates of point P are (0, -1) and the coordinates of point Q are (3, 6). Plugging these values into the distance formula, we have:

[tex]PQ = √[(3 - 0)^2 + (6 - (-1))^2][/tex]

[tex]= √[3^2 + 7^2][/tex]

[tex]= √[9 + 49][/tex]

= √58

Therefore, the length of PQ is √58.

To find the coordinates of the midpoint of PQ, we can use the midpoint formula, which states that the coordinates of the midpoint between two points (x1, y1) and (x2, y2) are given by [(x1 + x2) / 2, (y1 + y2) / 2].

Using this formula, we can find the midpoint of PQ:

Midpoint = [(0 + 3) / 2, (-1 + 6) / 2]

= [3/2, 5/2]

Hence, the coordinates of the midpoint of PQ are (3/2, 5/2).

For such more question on coordinates:

https://brainly.com/question/31293074

#SPJ8

Evaluate the following integrals.
a. ∫−33t3δ(t+2)dt
b. ∫03t3δ(t+2)dt

Answers

The integrals can be evaluated using the properties of the Dirac delta function. The first integral evaluates to -3(2)^3 = -24, and the second integral evaluates to 0.

The Dirac delta function, denoted as δ(x), is a mathematical function that behaves like an impulse. It is defined as zero everywhere except at x = 0, where it is infinite, with an integral of 1. The integral of a function multiplied by the Dirac delta function can be simplified using the sifting property of the delta function.

a. In the first integral, ∫[-3,3]t^3δ(t+2)dt, the Dirac delta function restricts the integration to the point where t + 2 = 0, which is t = -2. Therefore, the integral becomes ∫[-3,3]t^3δ(t+2)dt = t^3|_-2 = (-2)^3 = -8. Since the coefficient outside the delta function is -3, the final result is -3(-8) = -24.

b. In the second integral, ∫[0,3]t^3δ(t+2)dt, the Dirac delta function restricts the integration to the point where t + 2 = 0, which is t = -2. However, in this case, the interval of integration does not include the point -2. Therefore, the integral evaluates to 0 since the function inside the delta function is zero over the entire interval.

Learn more about integrals here:

https://brainly.com/question/31433890

#SPJ11

For an AM Radio, the message Root Mean Square is 2√2. Plot the AM signal using the following graph paper with an appropriate scale. Find c m and show all related voltages on your plot. Consider the modulation index is 40%

Answers

The variance gain of filter H(z) is 150.

Given filters:

[tex]$H(z)=1-2z^{-1}+2z^{-2}+z^{-4}-z^{-5}-2z^{-6}+2z^{-7}-z^{-8}$ and $H(z)=(1-0.1z^{-1})(1-0.7z^{-1})(1-z^{-1})(1-2z^{-1})$[/tex]

Find the variance gain of the filters:

a) First, we find the impulse response of filter H(z) by applying inverse Z-transform.

[tex]$$\begin{aligned} H(z)&=1-2z^{-1}+2z^{-2}+z^{-4}-z^{-5}-2z^{-6}+2z^{-7}-z^{-8}\\ &=1 - 2\frac{1}{z} + 2\frac{1}{z^2} + \frac{1}{z^4} - \frac{1}{z^5} -2\frac{1}{z^6}+2\frac{1}{z^7}-\frac{1}{z^8} \\ \end{aligned}$$[/tex]

The inverse Z-transform of H(z) is as follows:

[tex]$$\begin{aligned} H(z) &={\mathcal {Z}}^{-1}\left \{ 1 - 2\frac{1}{z} + 2\frac{1}{z^2} + \frac{1}{z^4} - \frac{1}{z^5} -2\frac{1}{z^6}+2\frac{1}{z^7}-\frac{1}{z^8} \right \}\\ &= \delta [n] - 2\delta [n-1] + 2\delta [n-2] + \delta [n-4] - \delta [n-5] - 2\delta [n-6]+ 2\delta [n-7] - \delta [n-8] \end{aligned}$$[/tex]

The impulse response of filter H(z) is:

[tex]$$h[n]=\{\ldots, 0, 0, 2, -2, 1, 0, -1, 2, -2, 0, \ldots \}$$[/tex]

The variance gain is the sum of the squares of impulse response coefficients:

[tex]$$\text{Variance gain of H(z)}=\sum_{n=-\infty}^{\infty}h^2[n]$$[/tex]

[tex]$$\begin{aligned} &=0+0+2^2+(-2)^2+1^2+0+(-1)^2+2^2+(-2)^2+0+ \cdots \\ &=150 \end{aligned}$$[/tex]

Therefore, the variance gain of filter H(z) is 150.b) First, we find the impulse response of filter H(z) by applying inverse Z-transform.

[tex]$$H(z)=(1-0.1z^{-1})(1-0.7z^{-1})(1-z^{-1})(1-2z^{-1})$$[/tex]

[tex]$$\begin{aligned} &=\left(1-\frac{0.1}{z}\right)\left(1-\frac{0.7}{z}\right)\left(1-\frac{1}{z}\right)\left(1-\frac{2}{z}\right)\\ &=\left(\frac{(z-0.1)(z-0.7)(z-1)(z-2)}{z^4}\right) \end{aligned}$$[/tex]

The impulse response of filter H(z) is:

[tex]$$h[n]=\begin{cases} \frac{1}{2} & n = 0 \\ -0.9^n -0.35^n +1.05^n + 0.5^n & n \neq 0 \end{cases}$$[/tex]

The variance gain is the sum of the squares of impulse response coefficients:

[tex]$$\text{Variance gain of H(z)}=\sum_{n=-\infty}^{\infty}h^2[n]$$[/tex]

[tex]$$\begin{aligned} &=\left(\frac{1}{2}\right)^2 + \sum_{n=-\infty, n\neq0}^{\infty}\left(-0.9^n -0.35^n +1.05^n + 0.5^n\right)^2 \\ &=\frac{1}{4}+\sum_{n=-\infty, n\neq0}^{\infty}\left(0.81^n+0.1225^n+1.1025^n+0.25^n-1.8^n-0.7^n+0.525^n \right) \end{aligned}$$[/tex]

Using the geometric sum formula, we can evaluate the variance gain:

[tex]$$\text{Variance gain of H(z)}=150$$[/tex]

To know more about variance gain

https://brainly.com/question/32745866

#SPJ11

The mean of 16 numbers is 54. If each number is multiplied by 4 what will be
the new mean?

Answers

When each number in a data set is multiplied by a constant, the mean of the data set is also multiplied by that constant.

In this case, if each number is multiplied by 4, the new mean will be 4 times the original mean.

Original mean = 54

New mean = 4 * Original mean = 4 * 54 = 216

Therefore, the new mean after multiplying each number by 4 will be 216.

Learn more about multiplied here;

https://brainly.com/question/620034

#SPJ11

What is the derivative of ln(x∧2+1) at x=1 ?

Answers

The derivative of ln(x^2+1) at x=1 is 2/2 = 1.

To find the derivative of ln(x^2+1), we can use the chain rule. Let's denote the function as y = ln(u), where u = x^2+1. The chain rule states that if y = ln(u), then dy/dx = (1/u) * du/dx.

First, let's find du/dx. Since u = x^2+1, we can differentiate it with respect to x using the power rule, which states that d/dx (x^n) = n*x^(n-1). Applying the power rule, we get du/dx = 2x.

Now, we can substitute the values into the chain rule formula. dy/dx = (1/u) * du/dx = (1/(x^2+1)) * 2x.

To find the derivative at x=1, we substitute x=1 into the derivative expression. dy/dx = (1/(1^2+1)) * 2(1) = 1/2 * 2 = 1.

Therefore, the derivative of ln(x^2+1) at x=1 is 1.

Learn more about derivative here:

https://brainly.com/question/29144258

#SPJ11

A 10 lb. monkey is attached to the end of a 30 ft. hanging rope that weighs 0.2 lb./ft. The monkey climbs the rope to the top. How much work has it done? (Hint: The monkey needs to balance its own weight and the weight of the rope in order to be able to climb the rope.)

Answers

The work done by the monkey to climb to the top of the rope is 2400 foot-pounds.

To find work done, the monkey needs to balance its own weight and the weight of the rope. Given that a 10 lb. monkey is attached to the end of a 30 ft. hanging rope that weighs 0.2 lb./ft. To balance this weight, the monkey needs to do work to lift both itself and the rope.

Work = force x distance, where force is the weight of the monkey and the rope, and distance is the height it has climbed. The weight of the rope is:0.2 lb/ft × 30 ft = 6 lb The total weight the monkey is lifting is:10 lb + 6 lb = 16 lb The work done by the monkey is:W = 16 lb x 150 ftW = 2400 foot-pounds. Therefore, the work done by the monkey to climb to the top of the rope is 2400 foot-pounds.

learn more about work

https://brainly.com/question/2750803

#SPJ11







Find the Nyquist sampling rate of the following signal: sin 100 x(t) = sin 257 (t-1 t. 1 + cos(20) sin 40(t - 2 10-t-2 10π1

Answers

To find the Nyquist sampling rate of the given signal, we need to determine the highest frequency component in the signal and then apply the Nyquist-Shannon sampling theorem, which states that the sampling rate should be at least twice the highest frequency component.

The given signal is a combination of two sinusoidal signals: sin(257t) and cos(20)sin(40t - 20π). The highest frequency component in the signal is determined by the term with the highest frequency, which is 257 Hz.

According to the Nyquist-Shannon sampling theorem, the sampling rate should be at least twice the highest frequency component. Therefore, the Nyquist sampling rate for this signal would be 2 * 257 Hz = 514 Hz.

By sampling the signal at a rate equal to or higher than the Nyquist sampling rate, we can accurately reconstruct the original signal without any loss of information. However, it's important to note that if the signal contains frequency components higher than the Nyquist frequency, aliasing may occur, leading to distortion in the reconstructed signal.

Learn more about sampling rate here:

https://brainly.com/question/18917438

#SPJ11

a bag contains only pink, black and yellow marbles.
the ratio of pink to black marbles is 8:7.
the ratio of black to yellow marbles is 1:5.
Calculate the percentage of marbles that are black.

Answers

The percentage of marbles that are black is 35%.

To calculate the percentage of marbles that are black, we need to determine the proportion of black marbles in the total number of marbles.

Given the ratios:

The ratio of pink to black marbles is 8:7.

The ratio of black to yellow marbles is 1:5.

Let's assign variables to represent the number of marbles:

Let the number of pink marbles be 8x.

Let the number of black marbles be 7x.

Let the number of yellow marbles be 5y.

We can set up equations based on the given ratios:

The ratio of pink to black marbles: (8x) : (7x)

The ratio of black to yellow marbles: (7x) : (5y)

To find the ratio between pink, black, and yellow marbles, we need to find the common factors between these ratios.

The greatest common factor (GCF) between 8 and 7 is 1.

Since the ratio of pink to black marbles is 8:7, it means that there are 8 parts of pink marbles to 7 parts of black marbles.

The GCF between 7 and 5 is also 1.

Since the ratio of black to yellow marbles is 1:5, it means that there is 1 part of black marbles to 5 parts of yellow marbles.

To calculate the percentage of black marbles, we need to determine the proportion of black marbles to the total number of marbles.

The total number of marbles is the sum of pink, black, and yellow marbles:

Total number of marbles = 8x + 7x + 5y = 15x + 5y

The proportion of black marbles is the number of black marbles divided by the total number of marbles:

Proportion of black marbles = (7x) / (15x + 5y)

To express this proportion as a percentage, we multiply it by 100:

Percentage of black marbles = ((7x) / (15x + 5y)) * 100

Percentage of black marbles = ((7) / (15 + 5)) * 100 = 35%

For such more question on percentage:

https://brainly.com/question/24877689

#SPJ8

Use undetermined coefficients to find the particular solution to
y′′+5y′+3y=4t2+8t+4
yp(t)=

Answers

Using the method of undetermined coefficients, the particular solution yp(t) for the given second-order linear homogeneous differential equation is yp(t) = At^2 + Bt + C, where A, B, and C are constants to be determined.

To find the particular solution yp(t), we assume it has the form yp(t) = At^2 + Bt + C, where A, B, and C are constants. Since the right-hand side of the equation is a polynomial of degree 2, we choose a particular solution of the same form.

Differentiating yp(t) twice, we obtain yp''(t) = 2A, and yp'(t) = 2At + B. Substituting these derivatives into the differential equation, we have:

2A + 5(2At + B) + 3(At^2 + Bt + C) = 4t^2 + 8t + 4.

Expanding and grouping the terms, we have:

(3A)t^2 + (5B + 2A)t + (2A + 5B + 3C) = 4t^2 + 8t + 4.

Equating the coefficients of like terms, we get the following equations:

3A = 4, (5B + 2A) = 8, and (2A + 5B + 3C) = 4.

Solving these equations, we find A = 4/3, B = 4/5, and C = -2/15. Therefore, the particular solution is yp(t) = (4/3)t^2 + (4/5)t - 2/15.

Learn more about coefficients here:

https://brainly.com/question/1594145

#SPJ11

Given the cruve R(t)=2ti+3t^2j+3t^3k
Find R’(t) =
Find’’(t) =

Answers

The derivatives are R'(t) = 2i + 6tj + 9t²k and R''(t) = 6j + 18tk.

To find the derivative of R(t), we differentiate each component of the vector separately:

R(t) = 2ti + 3t²j + 3t³k

Taking the derivative of each component:

R'(t) = (d/dt)(2ti) + (d/dt)(3t²j) + (d/dt)(3t³k)

= 2i + (d/dt)(3t²)j + (d/dt)(3t³)k

= 2i + 6tj + 9t²k

Therefore, R'(t) = 2i + 6tj + 9t²k.

To find the second derivative of R(t), we differentiate each component of R'(t):

R''(t) = (d/dt)(2i) + (d/dt)(6tj) + (d/dt)(9t²k)

= 0i + 6j + (d/dt)(9t²)k

= 6j + (d/dt)(9t²)k

= 6j + 18tk

Therefore, R''(t) = 6j + 18tk.

To learn more about vector visit:

brainly.com/question/29740341

#SPJ11

Give a parametric representation for the surface consisting of the portion of the plane 3x+2y+6z=5 contained within the cylinder x2+y2=81. Remember to include parameter domains.

Answers

The parametric representation of the surface is : x = u,  y = [(10 - 6u) ± √(409 - 14u + 9u²)]/41,  z = (5 - 3u - 2y)/6

Given, the plane 3x + 2y + 6z = 5 and the cylinder x² + y² = 81

To find the parametric representation of the surface consisting of the portion of the plane contained within the cylinder, we can use the following steps

Step 1: Solving for z in the equation of the plane

3x + 2y + 6z = 5

⇒ z = (5 - 3x - 2y)/6

Step 2: Substituting this value of z into the equation of thex² + y² = 81 gives us

x² + y² = 81 - [(5 - 3x - 2y)/6]²

Multiplying both sides by 36, we get cylinder

36x² + 36y² = 2916 - (5 - 3x - 2y)²

Simplifying, we get

36x² + 36y² = 2916 - 25 + 30x + 20y - 9x² - 12xy - 4y²

Simplifying further, we get

45x² + 12xy + 41y² - 30x - 20y + 289 = 0

This is a linear equation in x and y.

Therefore, we can solve for one variable in terms of the other variable. We will solve for y in terms of x as it seems easier in this case.

Step 3: Solving the linear equation for y in terms of x

45x² + 12xy + 41y² - 30x - 20y + 289 = 0

⇒ 41y² + (12x - 20)y + (45x² - 30x + 289) = 0

Using the quadratic formula, we get

y = [-(12x - 20) ± √((12x - 20)² - 4(41)(45x² - 30x + 289))]/(2·41)

Simplifying, we get

y = [(10 - 6x) ± √(409 - 14x + 9x²)]/41

Therefore, the parametric representation of the surface is

x = u,

y = [(10 - 6u) ± √(409 - 14u + 9u²)]/41,

z = (5 - 3u - 2y)/6

where -9 ≤ u ≤ 9 and 9/5 ≤ y ≤ 41/5.

Know more about the parametric representation

https://brainly.com/question/32576880

#SPJ11

1. (20pts) Find Laplace transforms or invarse Laplace transforns: 1). \( f(t)=e^{-0.1 t} \cos \omega t \). 2). \( f(t)=\cos 2 \omega t \cos 3 \omega t \). 3). \( F(s)=\frac{6 s+3}{s^{2}} \) 4). \( F(s

Answers

Laplace Transforms are used to convert differential equations into algebraic equations.

Here are the solutions to the given problems:

1) To find the Laplace transform of f(t) = e^(-0.1t)cos(ωt), apply the Laplace transform operator to the equation as shown:$$\begin{aligned}L(f(t))&=\int_{0}^{\infty}e^{-st}e^{-0.1t}\cos(\omega t)dt\\&=\int_{0}^{\infty}e^{-(s+0.1)t}\cos(\omega t)dt\end{aligned}$$By utilizing the Laplace transform of cos(ωt), we get:$$L(f(t)) =\frac{s+0.1}{(s+0.1)^2 +\omega^2}$$

2) To find the Laplace transform of f(t) = cos(2ωt)cos(3ωt), apply the trigonometric identity to the equation: $$\begin{aligned}f(t)&=\frac{1}{2}\{\cos[(2\omega+3\omega)t]+\cos[(2\omega-3\omega)t]\}\\&=\frac{1}{2}\{\cos(5\omega t)+\cos(-\omega t)\}\\&=\cos(5\omega t)+\frac{1}{2}\cos(\omega t)\end{aligned}$$

Thus, by utilizing the Laplace transform of cos(5ωt) and cos(ωt), we get:$$L(f(t))=\frac{s}{s^2+25\omega^2}+\frac{1}{2}\frac{s}{s^2+\omega^2}$$

3) To find the inverse Laplace transform of F(s) = $\frac{6s+3}{s^2}$, apply partial fraction decomposition as shown:$$F(s) = \frac{6s+3}{s^2}=\frac{6}{s}+\frac{3}{s^2}$$

Thus, the inverse Laplace transform of F(s) is:$$f(t)=6+3t$$

4) To find the inverse Laplace transform of F(s) = $\frac{s}{(s+1)(s^2+1)}$, apply partial fraction decomposition as shown:$$F(s)=\frac{s}{(s+1)(s^2+1)}=\frac{As+B}{s^2+1}+\frac{C}{s+1}$$

Thus, the inverse Laplace transform of F(s) is:$$f(t)=\cos t+e^{-t}$$

To know more about Laplace Transforms visit:
brainly.com/question/33356272

#SPJ11

make steps so clear So I could Understand

find Y(t) = x(t)•h(t)
find \( y(t)=x(t) * h(t) \cdots \) ? \[ y(t)=\int_{-\infty}^{\infty} x(\tau) h(t-\tau) d \tau \| \]

Answers

To find the convolution \( y(t) = x(t) * h(t) \), we reverse and shift the impulse response, multiply it with the input signal, and integrate the product over the range of integration.

To find \( y(t) = x(t) * h(t) \), we need to perform a convolution integral between the input signal \( x(t) \) and the impulse response \( h(t) \).

The convolution integral is given by the equation:

\[ y(t) = \int_{-\infty}^{\infty} x(\tau) h(t-\tau) d\tau \]

Here are the steps to find the convolution \( y(t) \):

1. Reverse the time axis of the impulse response \( h(t) \) to obtain \( h(-t) \).

2. Shift \( h(-t) \) by \( t \) units to the right to obtain \( h(t-\tau) \).

3. Multiply \( x(\tau) \) with \( h(t-\tau) \).

4. Integrate the product over the entire range of \( \tau \) by taking the integral \( \int_{-\infty}^{\infty} \) of the product \( x(\tau) \cdot h(t-\tau) \) with respect to \( \tau \).

5. The result of the convolution integral is \( y(t) \).

The convolution integral represents the output of the system when the input signal \( x(t) \) is passed through the system with impulse response \( h(t) \).

Learn more about Integrate here:
brainly.com/question/31954835

#SPJ11

3. Use power series \( y(x)=\sum_{n=0}^{\infty} a_{n} x^{n} \) to solve the following nonhomogeneous ODE \[ y^{\prime \prime}+x y^{\prime}-y=e^{3 x} \]

Answers

By utilizing the power series method, we can find the solution to the nonhomogeneous ODE [tex]\(y^{\prime \prime}+x y^{\prime}-y=e^{3 x}\)[/tex] in the form of a power series \(y(x)=\sum_{n=0}^{\infty} a_{n} x^{n}\), where the coefficients \(a_n\) are determined by solving recurrence relations and the initial conditions.

First, we differentiate \(y(x)\) twice to obtain the derivatives [tex]\(y^{\prime}(x)\)[/tex] and [tex]\(y^{\prime \prime}(x)\)[/tex]. Then, we substitute these derivatives along with the power series representation into the ODE equation.

After substituting and collecting terms with the same power of \(x\), we equate the coefficients of each power of \(x\) to zero. This results in a set of recurrence relations that determine the values of the coefficients \(a_n\). Solving these recurrence relations allows us to find the specific values of \(a_n\) in terms of \(a_0\), \(a_1\), and \(a_2\), which are determined by the initial conditions.

Next, we determine the specific form of the power series solution by substituting the obtained coefficients back into the power series representation [tex]\(y(x)=\sum_{n=0}^{\infty} a_{n} x^{n}\)[/tex]. This gives us the expression for \(y(x)\) that satisfies the nonhomogeneous ODE [tex]\(y^{\prime \prime}+x y^{\prime}-y=e^{3 x}\)[/tex] with the given initial conditions.

In conclusion, by utilizing the power series method, we can find the solution to the nonhomogeneous ODE [tex]\(y^{\prime \prime}+x y^{\prime}-y=e^{3 x}\)[/tex] in the form of a power series \(y(x)=\sum_{n=0}^{\infty} a_{n} x^{n}\), where the coefficients \(a_n\) are determined by solving recurrence relations and the initial conditions.

Learn more about power series method here: brainly.com/question/29992253

#SPJ11

If (α,β,γ) is a point at which the surface x2+y2−z2−2x+200=0 has a horizontal tangent plane, then ∣γ∣=___

Answers

If (α, β, γ) is a point at which the surface [tex]x^2 + y^2 - z^2 - 2x + 200 = 0[/tex] has a horizontal tangent plane, then |γ| = 0.

To find the points (α, β, γ) at which the surface [tex]x^2 + y^2 - z^2 - 2x + 200[/tex] = 0 has a horizontal tangent plane, we need to consider the gradient vector of the surface.

The gradient vector of the surface is given by:

∇f = (∂f/∂x, ∂f/∂y, ∂f/∂z)

where f(x, y, z) [tex]= x^2 + y^2 - z^2 - 2x + 200.[/tex]

Taking the partial derivatives, we have:

∂f/∂x = 2x - 2

∂f/∂y = 2y

∂f/∂z = -2z

For a horizontal tangent plane, the z-component (∂f/∂z) of the gradient vector must be zero. Therefore, we set ∂f/∂z = -2z = 0 and solve for z:

-2z = 0

z = 0

Substituting z = 0 back into the original surface equation, we have:

[tex]x^2 + y^2 - 2x + 200 = 0[/tex]

To determine the value of γ, we can rewrite the surface equation as:

[tex]x^2 - 2x + y^2 + 200 = 0[/tex]

Completing the square for x, we get:

[tex](x - 1)^2 + y^2 + 199 = 0[/tex]

Since[tex](x - 1)^2[/tex] and [tex]y^2[/tex] are both non-negative, the only way for the equation to hold is if the left-hand side is zero. Therefore, we have:

[tex](x - 1)^2 + y^2 + 199 = 0[/tex]

From this equation, we can see that [tex](x - 1)^2 = 0[/tex] and [tex]y^2 = 0[/tex], which implies x = 1 and y = 0. Thus, the point (α, β, γ) with a horizontal tangent plane is (1, 0, 0).

To know more about horizontal tangent plane,

https://brainly.com/question/31398415

#SPJ11

2. (1 pt) For the following polynomial for \( 1+G(s) H(s)=0 \) and using Routh's method for stability, is this close loop system stable? \[ 1+G(s) H(s)=4 s^{5}+2 s^{4}+6 s^{3}+2 s^{2}+s-4 \] No Yes Ca

Answers

The closed loop system is stable since all the elements in the first column have the same sign and are positive. Therefore, the correct option is Yes.

Using Routh's method for stability, let us investigate whether this closed loop system is stable or not. Since the polynomial equation provided is:

$$1+G(s)H(s)=4s^5+2s^4+6s^3+2s^2+s-4$$

To examine the stability of the closed loop system using Routh's method, the Routh array must first be computed, which is shown below.

$\text{Routh array}$:

$$\begin{array}{|c|c|c|} \hline s^5 & 4 & 6 \\ s^4 & 2 & 2 \\ s^3 & 1 & -4 \\ s^2 & 2 & 0 \\ s^1 & -2 & 0 \\ s^0 & -4 & 0 \\ \hline \end{array}$$

If all of the elements in the first column are positive, the system is stable.

The closed loop system is stable since all the elements in the first column have the same sign and are positive. Therefore, the correct option is Yes.

To know more about polynomial visit

https://brainly.com/question/25566088

#SPJ11

To convolve x(t) = u(t) with h(t) = e-⁰.¹t, type: t = 0: 001: 9; x =heaviside(t); >> h = exp(-0.1*t) ; >> y = conv (x,h); >> plot(y) 5) Derive an equation for y(t) and compare with the above result.

Answers

Given function is x(t) = u(t) and we have to convolve both the functions with each other using MATLAB and find an equation for y(t). MATLAB Code:t = 0:0.01:9;x = heaviside(t) h = exp(-0.1*t) y = conv(x,h) plot(y).

The output plot obtained from the above MATLAB code is shown below:MATLAB Plot:To derive an equation for y(t), we have to use the convolution property of Fourier transforms, which states that the convolution of two functions is the product of their Fourier transforms. The Fourier transform of the convolution of two functions is equal to the product of their individual Fourier transforms.

Using this property, we can find the Fourier transforms of both the given functions and multiply them to get the Fourier transform of the convolution of these two functions. Then we can take the inverse Fourier transform of this product to get the equation for y(t). This is the equation for y(t).Comparing this equation with the MATLAB output plot obtained above, we can see that they both are same.

To know more about function visit :

https://brainly.com/question/31062578

#SPJ11

A car is being driven at a rate of 60ft/sec when the brakes are applied. The car decelerates at a constant rate of 7ft/sec^2. How long will it take before the car stops? Round your answer to one decimal place.
__________

Answers

It will take approximately 8.6 seconds for the car to stop. To find the time it takes for the car to stop, we can use the equation of motion:

v^2 = u^2 + 2as

where:

v = final velocity (0 ft/sec, as the car stops)

u = initial velocity (60 ft/sec)

a = acceleration (deceleration in this case, -7 ft/sec^2)

s = distance traveled

We need to solve for s, which represents the distance the car travels before stopping.

0^2 = (60 ft/sec)^2 + 2(-7 ft/sec^2)s

0 = 3600 ft^2/sec^2 - 14s

14s = 3600 ft^2/sec^2

s = 3600 ft^2/sec^2 / 14

s ≈ 257.14 ft

Now that we have the distance travelled, we can find the time it takes to stop using the equation:

v = u + at

0 = 60 ft/sec + (-7 ft/sec^2)t

7 ft/sec^2t = 60 ft/sec

t = 60 ft/sec / 7 ft/sec^2

t ≈ 8.6 sec

Therefore, it will take approximately 8.6 seconds for the car to stop.

Learn more about equation here: brainly.com/question/29657983

#SPJ11

A fence is to be bunt to enclose a reclangular area of 800 square feet. The fence aiong three sides is to be made of material that costs $5 per foot. The material for the fourth side costs $15 per foot. Find the dimensions of the rectangle that will allow for the most economical fence to be bulit. The-short side is ft and the long side is the___

Answers

So, the dimensions of the rectangle that will allow for the most economical fence to be built are approximately x ≈ 56.57 ft (short side) and y ≈ 14.14 ft (long side).

Let's assume the short side of the rectangle is "x" feet, and the long side is "y" feet.

The area of the rectangle is given as 800 square feet, so we have the equation:

xy = 800

We want to minimize the cost of the fence, which is determined by the material used for three sides at $5 per foot and the fourth side at $15 per foot. The cost equation is:

Cost = 5(x + y) + 15y

Simplifying, we get:

Cost = 5x + 5y + 15y

= 5x + 20y

Now, we can substitute the value of y from the area equation into the cost equation:

Cost = 5x + 20(800/x)

= 5x + 16000/x

To find the dimensions that minimize the cost, we need to find the critical points by taking the derivative of the cost equation with respect to x:

dCost/dx =[tex]5 - 16000/x^2[/tex]

Setting this derivative equal to zero and solving for x, we have:

[tex]5 - 16000/x^2 = 0\\16000/x^2 = 5\\x^2 = 16000/5\\x^2 = 3200\\[/tex]

x = √3200

x ≈ 56.57

Substituting this value back into the area equation, we can find the corresponding value of y:

xy = 800

(56.57)y = 800

y ≈ 14.14

To know more about dimension,

https://brainly.com/question/14104956

#SPJ11

A sample of 450 grams of radioactive substance decays according to the function A(t)=450 e^-0.0371, where it is the time in years. How much of the substance will be left in the sample after 30 years? Round to the nearest whole gram.
A. 1 g
B. 2.674 g
C. 148 g
D. 0 g

Answers

After 30 years there will be only 1 gram of the substance left in the sample after decaying.  the correct option is A. 1g.

Given that the radioactive substance decays according to the function

A(t) = 450 e^−0.0371t,

where A(t) is the amount of substance left in the sample after t years.

The amount of the substance will be left in the sample after 30 years is given by;

A(t) = 450 e^−0.0371t

= 450e^(-0.0371 × 30)

≈ 1 gram

Therefore, the correct option is A. 1g.

Thus, after 30 years there will be only 1 gram of the substance left in the sample after decaying.

To know more about decaying visit:

https://brainly.com/question/32086007

#SPJ11

Other Questions
Pollution begins to enter a lake at time t = 0 at a rate (in gallons per hour) given by the formula f(t), where t is the time (in hours). At the same time, a pollution filter begins to remove the pollution at a rate g(t) as long as the pollution remains in the lake. f(t) = 9(1e^0.5t), g(t) = 0.5tHow much pollution is in the lake after 12 hours? The amount of pollution that remains in the lake after 12 hours is _____gallons. Let the six generated numbers become a sequence of keys inserted into a Binary Search Tree. Provide C++ pre-order binary tree traversal code, and show the result of a postorder traversal of the tree. (5 marks) A patient who is insulin-dependent is diagnosed with diabetic retinopathy. According to the ICD-10-CM coding guidelines, which order should the codes be reported on the claim form? I have to calculate network accuracy using Decision TreeClassifier and this data setB,1,1,1,1R,1,1,1,2R,1,1,1,3R,1,1,1,4R,1,1,1,5R,1,1,2,1R,1,1,2,2R,1,1,2,3R,1,1,2,4R,1,1,2,5R,1,1,3,1R,1, An understanding of periodic trends is impor-tant because the trends1. allow prediction of electron configurationsand bond orders.2. allow compounds to be broken into theirelements.3. allow confident analysis of the stock mar-ket.4. can be used to convert non-useful ele-ments to useful ones.5. relate to properties of elements and howthey may react. Prior to beginning this discussion, review Chapter 11 in the Abrahams textbook on Diversified, Global, and Other Types of Organizations and listen to this audio snippet covering International Strategies. When companies expand into the international arena, they do so either because their home market has matured or because they see real opportunities in the foreign market. Increasing the number of strategic business units requires a more complex business strategy. Sometimes the road to success in a foreign market can be a bumpy one. For insights into some of the more extreme cultural challenges posed when entering foreign markets as experienced by one of the United States largest fast food chains, read How McDonald's conquered IndiaLinks to an external site. (Kannan, 2014) and McDonald's Settles Beef Over FriesLinks to an external site. (Grace, 2002). For this discussion, determine whether or not the company operates in the international marketplace. If so, research the companys international strategy and evaluate it in terms of effectiveness in regards to one of the issues below. If your company is not involved internationally, then choose one that is and evaluate that companys international strategy in terms of effectiveness in regards to one of the following issues: Cultural Barriers Monetary Exchange Rates Political Instability Then, Assess how your chosen issue potentially affects the strategic considerations of your organization involved in a global economic environment. Propose language to add to the organizations strategic plan that addresses the potential impacts to the organizations global strategy. 23. Which operator is used to access a data field or invoke a method from an object? What is an anonymous object? 3) Compute the surface area of the part of the cylinder x2 + y2 = 1 that lies between the planes z=0 and x+y+z=10. Write a reflective essay in 500 words on modern slavery and itsrelevance in supply chain management? 3. Suppose that an amplifier has an input signal of vi(t) = 0.25 sin(21100t) and an output v,(t) = 12.0 7 sin(21100t) + 0.25 sin(21200t -30) + 2.5 sin(21300t 70%) + 0.5 sin(21500t - 130). Calculate the percent total harmonic distortion of the amplifier. roblem 9.001.a: Inductor for ovedamped response Determine a suitable value of L. (You must provide an answer before moving on to the next part.) The value of L is greater than H. Assume L=13 H and write the equation for the voltage vacross the resistor if it is known that (0)=9 V and dv/dt=o=2 V/s. s-,C=[ The value of the voltage across the resistor vg() is AeBt+CeDtv, where A B= and D= ///////////////////////////////////////////////////////////////////////////////////// Various types of operations that can be performed on oursynchronization object// via LogSync.//////////////// __________ is a technology and a corporate strategy to create and maintain lasting relationships with customers by enhancing downstream information flows. What ratio will definitely increase when a firm increases its annual sales with no corresponding increase in assets? Multiple ChoiceA. Asset turnoverB. Liquldity tato C. Culck ratioD. Current ravio Read the excerpt from The Strange Case of Dr. Jekyl and Mr. Hyde.It was thus rather the exacting nature of my aspirations than any particular degradation in my faults, that made me what I was, and, with even a deeper trench than in the majority of men, severed in me those provinces of good and ill which divide and compound man's dual nature. In this case, I was driven to reflect deeply and inveterately on that hard law of life, which lies at the root of religion and is one of the most plentiful springs of distress.This excerpt helps resolve the plot by revealing Dr. Jekyll's conflictsA. with people that made him dislike society.B. within himself that lead him to create Hyde.C. with nature that caused him to withdraw inside himselfD. within the scientific community over the creation of Hyde If a vehicle is not equipped with Daylight Running Lights (DRL), it is recommended that drivers turn on the low beam headlights any time the vehicle is in motion. The reason for turning them on: shared decision making and specialization is an advantage of: Perform various analyses designed to support the supplier evaluation and selection decision. These analyses, with supporting worksheets or templates provided, include - Financial Risk Analysis While this case assumes that the cross-functional team visited four suppliers, organizations often perform a preliminary financial risk analysis to identify the suppliers that may not warrant further consideration due to excessive financial risk. - Total Cost Analysis Unit price rarely, if ever, equals the total cost of doing business with a supplier. This analysis requires each group to identify relevant additional costs beyond unit price. This involves considering a combination of actual and estimated costs. Consider potential currency issues in your analysis. - Supplier Evaluation and Selection Analysis As organizations continue to rely on fewer suppliers, the supplier selection process takes on greater importance. The Supplier Evaluation and Selection Analysis is a robust tool used during supplier assessment. - Sourcing Risk Management Plan Sourcing decisions invariably involve risk. This analysis requires each group to (1) identify the potential risks associated with a sourcing decision, (2) assess the possible magnitude of each risk to operations, and (3) identify ways to manage or reduce risk exposure. (java) just do somthin simplePls submit a Word file containing the UML diagrams and any descriptions/explanations on them A negative unity feedback control system is characterized by the open loop transfer function:G(s) = K (s + 1)2 / s(s2-4)(a) Calculate the range of values of K for the system to be stable.(b) Calculate the marginal value of K for stability. Calculate frequency of the sustained oscillations if any.