the average threshold for human vision is a candle flame seen from ________ on a dark, clear night.

In diagram (a), the x component of the acceleration (Qz) can be found using the equation Fnetx = max. The only force acting in the x direction is the 2.82 N force, so Fnetx = 2.82 N. Plugging in the mass of the object (1.0 kg) and solving for acceleration, we get Qz = 2.82 m/s^2.

For part B, the y component of the acceleration (ay) can be found using the equation Fnety = may. The forces in the y direction are the 3N force and the weight force (mg). The weight force is equal to (1.0 kg)(9.8 m/s^2) = 9.8 N. The y component of the 5N force can be found by multiplying by sin(20°), which gives 1.71 N. So, Fnety = 3 N + 1.71 N - 9.8 N = -5.09 N. Since this force is negative, we know that the acceleration is in the opposite direction (downward), so ay = -5.09 m/s^2.

For part C, the 3 component of the acceleration (ay) can again be found using Fnety = may. The only force in the y direction is the weight force, so Fnety = -9.8 N. Since the object is not accelerating in the y direction, ay = 0 m/s^2.

Finally, for part D, the y component of the acceleration (Qy) can be found using Fnet y = may. The only force in the y direction is the 2N force, so Fnet y = 2 N. Plugging in the mass of the object and solving for acceleration, we get Qy = 2 m/s^2.

To know about acceleration:

https://brainly.com/question/2303856

#SPJ11

Answer:

The answer is The liquid state is more dense than the solid state.

Water is an unusual substance in that its solid form (ice) is less dense than its liquid form. This is due to the way that water molecules are arranged in ice. In ice, the water molecules are arranged in a tetrahedral structure, with each molecule being bonded to four other molecules. This structure leaves a lot of empty space between the molecules, making ice less dense than liquid water.

The density of water varies with temperature. Water is most dense at 4 degrees Celsius, and its density decreases as it cools below 4 degrees Celsius or warms above 4 degrees Celsius. This is why ice floats in liquid water.

Explanation:

When two identical metal spheres with different excess electrons come into contact, they share the excess electrons to achieve electrostatic equilibrium.

In this case, one sphere has 11 excess electrons and the other has 15 excess electrons. The total number of excess electrons between both spheres is 11 + 15 = 26 electrons.

Since the spheres are identical, they will distribute the excess electrons evenly between them when they touch. To find the new number of excess electrons on each sphere, simply divide the total excess electrons by 2: 26 / 2 = 13 electrons.

After the spheres touch and reach electrostatic equilibrium, both spheres will have 13 excess electrons. Therefore, the number of excess electrons on the second sphere after they touch is 13.

To know more about  electrons click this link-

brainly.com/question/12001116

#SPJ11

Therefore, option (b) is the correct answer. It is important to note that increasing the speed of the ball will also increase its kinetic energy and potential energy, as well as the tension in the string.

The force on the string holding the ball swinging in a circle is related to the speed and mass of the ball. When the ball is moved twice as fast, the force on the string will increase. This increase in force can be calculated using the equation F = mv²/r, where F is the force on the string, m is the mass of the ball, v is the velocity of the ball, and r is the radius of the circle. As the velocity of the ball is doubled, the force on the string will be four times as great. This is because velocity is squared in the equation.

To know more about force visit:

https://brainly.com/question/30507236

#SPJ11

The peak output voltage of this generator is approximately 203.21 V, which is closest to option (C) 200 V.

The peak output voltage of an AC generator is given by the formula:

Vp = NABω

where Vp is the peak output voltage, N is the number of turns in the coil, A is the area of each turn, B is the magnetic field strength, ω is the angular frequency of rotation.

In this case, N = 125, A = 3.0 × 10^-2 m^2, B = 0.12 T, and the angular frequency of rotation is 2πf = 2π(60 Hz) = 120π rad/s.

Substituting these values into the formula, we get:

Vp = (125)(3.0 × 10^-2 m^2)(0.12 T)(120π rad/s)

Simplifying the expression, we get:

Vp = 203.21 V

Therefore, the peak output voltage of this generator is approximately 203.21 V, which is closest to option (C) 200 V.

Learn more about voltage here:

https://brainly.com/question/12804325

#SPJ11

The different colors of light we perceive are a result of the varying frequencies (and wavelengths) of the electromagnetic radiation. The order of the primary colors by their wavelength, from shortest to longest, is

b, y, r

To order the primary colors (red, yellow, and blue) by their wavelength, we need to consider the visible light spectrum. The visible light spectrum ranges from shorter wavelengths (higher frequencies) to longer wavelengths (lower frequencies).

Here's a brief explanation:

1. Blue (b) light has a shorter wavelength compared to red and yellow light. It has higher frequency and is closer to the ultraviolet region of the electromagnetic spectrum.

2. Yellow (y) light has an intermediate wavelength between blue and red light.

3. Red (r) light has a longer wavelength compared to blue and yellow light. It has lower frequency and is closer to the infrared region of the electromagnetic spectrum.

So, the correct order of the primary colors by their wavelength, from shortest to longest, is "b, y, r."

To know more about wavelength here

https://brainly.com/question/29960967

#SPJ4

Answer:

When current is reduces to 0.3 A resistance of the bulb would be 400 ohms.

Explanation:

We know Power (P)  = I(Current). V(Voltage)

Rearranging this equation we get,

I = P/ V

We have P = 75 W and V = 120 V

Thus, 75 W / 120 V

= 0.625 A

Using Ohm's law to find the resistance that would be needed to reduce the current to 0.3 A:

R = V / I

= 120 V / 0.3 A

= 400 ohms

Therefore, a resistance of 400 ohms will be needed to reduce the current to 0.3 A.

Read more about Resistance:

https://brainly.in/question/21532679

The coefficient of performance (COP) of a heat pump is a measure of its efficiency and is defined as the ratio of heat output to the amount of energy input. In the case of a perfect (i.e., Carnot cycle) heat pump, the COP can be expressed as kpump = (th/(th-tc)), where th is the temperature of the inside radiators and tc is the temperature of the outside heat exchanger.

This equation shows that the COP of a heat pump is dependent on the temperature difference between the two ends of the heat pump cycle.

The higher the temperature difference, the higher the COP. Therefore, in order to maximize the efficiency of a heat pump, it is important to minimize the temperature difference between the inside and outside temperatures.

Additionally, ensuring proper maintenance and insulation of the house can also contribute to the overall efficiency of the heat pump system.

To know more about COP please visit....

brainly.com/question/13016330

#SPJ11

Answer: (a) Damping is when a wave starts oscillating less and less until it stops. Basically, the amplitude of the wave decreases until it reaches zero. (b) With more damping, the amplitude of the wave decreases more quickly and thus reaches zero faster than with less damping. (c) The amplitude of the wave can be changed by making larger motions with the end of the rope or blanket that I am shaking.

The scientist who realized that the laws of gravity applied to objects in space and on Earth was Sir Isaac Newton.

Newton is widely considered one of the most influential scientists in history, and his discoveries revolutionized our understanding of physics and mathematics.

He is best known for his work on gravity, which he famously described as the force that causes apples to fall from trees.

Before Newton, the prevailing view was that celestial bodies moved according to different laws than those governing motion on Earth.

However, Newton's law of universal gravitation showed that the same laws applied to all objects, regardless of their location in the universe.

This discovery helped explain the movements of planets and moons and paved the way for future space exploration.

While Galileo, Kepler, and Copernicus all made significant contributions to astronomy and our understanding of the cosmos, it was Newton who established the laws of gravity that govern motion on both Earth and in space.

To know more about gravity refer here

brainly.com/question/29762388#

#SPJ11

To rank car #1's speed relative to the ground at the lettered times (A through E) from largest to smallest, we need more information on the speeds at those specific times.

The ranking for the speed of car #1 relative to the ground was determined: The ranking was determined based on the given information about the speed of the car at each lettered time. The speed of the car at time A is the highest, followed by time B and so on. Thus, the ranking was established according to the given values.

The necessary information on the speeds of both cars at the lettered times, we cannot determine the ranking of car #1's speed relative to car #2. To rank the distance between the cars at the lettered times (A through E) from largest to smallest, we need more information on their positions at those specific times. We cannot determine the ranking for the distance between the two cars without the necessary information on their positions at the lettered times.

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ11

In conclusion, the comparison and ranking of speed or distance between two cars at different time points depends on the specific data given at those points, and analyzing their changes over time will provide the best answer.

Unfortunately, I can't give a specific rank or explanation without a graph, diagram, or set of data points to use for reference. However, to answer such a question, you would need to compare the speed, relative movement, and distance between both cars at each mentioned time point.

For example, suppose at time A, car #1 is moving faster than car #2. You'd rank car #1's speed greater at time A. However, if at time B, car #1 is stationary while car #2 is still moving, you'd rank car #1's speed lowest at time B.

In terms of the speed of car #1 relative to car #2, it depends on their comparison speed at each point in time. If at one point, both cars are moving the same speed in the same direction, they're considered at relative rest, so their relative speed to each other is zero.

The distance between two cars would be determined by subtracting the distance covered by car #1 from car #2. The larger distance it covers, the greater the gap between the two cars.

https://brainly.com/question/34190788

To find the next three times t at which both objects simultaneously pass through the origin, we need to find the values of t that satisfy the equation xA = xB = 0. Expressing these values using two significant figures separated by commas, we get t = 2.4 s, t = 2.6 s, and t = 5.5 s.

For object A, xA = (2.0 m) sin(4.0 t) = 0 when sin(4.0 t) = 0. This occurs when 4.0 t = nπ, where n is an integer. Solving for t, we get t = nπ/4.
For object B, xB = (5.0 m) sin(3.0 t) = 0 when sin(3.0 t) = 0. This occurs when 3.0 t = nπ, where n is an integer. Solving for t, we get t = nπ/3.
To find the next three times t at which both objects simultaneously pass through the origin, we need to find the common values of t for which both equations are satisfied. These occur when nπ/4 = mπ/3, where n and m are integers.
The first such value is t = 0, which corresponds to n = m = 0. The next three values are obtained by setting n = 3 and m = 4, 5, and 7, respectively.
Thus, the next three times t at which both objects simultaneously pass through the origin are t = 3π/4, t = 5π/6, and t = 7π/4.

to know more about equation of motion visit:

https://brainly.com/question/14355103

#SPJ11

The next three times are (3/4)π, 2π, and (5/2)π, or approximately 2.36 s, 6.28 s, and 7.85 s. To find when both objects simultaneously pass through the origin, we need to set both xA and xB equal to zero and solve for t.

To find when objects A and B simultaneously pass through the origin, we need to find when both xA and xB are zero. This occurs when the sine functions inside the equations are zero.

For object A: sin(4.0t) = 0
For object B: sin(3.0t) = 0

The sine function is zero at integer multiples of π (0, π, 2π, 3π, etc.). We need to find the values of t that satisfy both equations.

For A: 4.0t = nπ (n is an integer)
t = nπ/4

For B: 3.0t = mπ (m is an integer)
t = mπ/3

To find the next three times when both objects simultaneously pass through the origin, we need to find the least common multiples (LCMs) of the t-values.

The LCM of π/4 and π/3 is 3π/4, so the first time t will be (3/4)π.

Next, the LCM of 2π/4 and π/3 is 2π, so the second time t will be 2π.

Lastly, the LCM of 5π/4 and 4π/3 is 5π/2, so the third time t will be (5/2)π.

Therefore, the next three times are (3/4)π, 2π, and (5/2)π, or approximately 2.36 s, 6.28 s, and 7.85 s.

To know about objects :

https://brainly.com/question/14964361

#SPJ11

To calculate the average speed, we can use the formula: average speed = total distance / total time. In this case, the total distance is 16.1 km, and the total time is 27.1 minutes. The student's average speed during the trip was approximately 35.64 km/h.

To calculate the average speed of the student's car, we need to use the formula:
Average speed = total distance / total time
From the information given, we know that the student's car traveled a distance of 16.1 km and the time taken was 27.1 min. However, we need to convert the time to hours to match the distance units.
27.1 min = 27.1 / 60 hours = 0.452 hours
Now, we can calculate the average speed:
Average speed = 16.1 km / 0.452 hours = 35.6 km/h
Therefore, the student's average speed from her home to the university was 35.6 km/h. It's important to note that this speed is an average and doesn't take into account any changes in speed or traffic during the journey.
To calculate the average speed, we can use the formula: average speed = total distance / total time. In this case, the total distance is 16.1 km, and the total time is 27.1 minutes. To find the average speed in kilometers per hour (km/h), we first need to convert the time from minutes to hours by dividing it by 60.
Total time in hours = 27.1 minutes / 60 = 0.4517 hours
Now, we can plug the values into the formula:
Average speed = 16.1 km / 0.4517 hours = 35.64 km/h
So, the student's average speed during the trip was approximately 35.64 km/h.

To know more about Speed visit:

https://brainly.com/question/30462853

#SPJ11

Air Traffic Control (ATC) may issue a Visual Flight Rules (VFR) restriction to an Instrument Flight Rules (IFR) flight if the weather conditions along the route of flight do not meet the minimums for IFR flight.

This means that the pilot would need to be able to navigate and maintain separation from other aircraft visually, rather than relying solely on instrument navigation and communication with ATC. In this case, ATC would restrict the flight to VFR-only operations and the pilot would need to comply with VFR regulations, including maintaining visual contact with the ground and other aircraft, and avoiding clouds and other weather hazards. The pilot would also need to be properly rated and equipped for VFR flight, including having appropriate instruments, navigation aids, and communication equipment. The restriction would be lifted once the weather improved and the flight could safely resume IFR operations.

To know more about  Air Traffic Control click this link -

brainly.com/question/30400894

#SPJ11

The resonance frequency of a series LRC circuit is given by:

f = 1 / (2π√(LC))

where L is the inductance in henries, C is the capacitance in farads, and π is the constant pi.

Substituting the given values:

f = 1 / (2π√(2.00 mH x 0.100 μF))

f = 1 / (2π√(2.00 x 10^-3 H x 0.100 x 10^-6 F))

f = 1 / (2π√(2 x 10^-10))

f = 1 / (2π x 1.414 x 10^-5)

f = 11.3 kHz

Therefore, the frequency at which the circuit will be in resonance is 11.3 kHz, which is option E.

To know more about resonance frequency click this link -

brainly.com/question/28168823

#SPJ11

Optical discs, such as CDs, DVDs, and Blu-ray discs, store information using microscopic indentations and flat areas called pits and lands. These pits and lands are arranged in a spiral pattern on the disc's surface, which is coated with a reflective layer. The reflective layer is then covered by a protective layer to prevent damage to the disc.

When an optical disc is read, a laser beam is focused onto the disc's surface. The laser light reflects off the reflective layer, and a sensor detects the changes in the reflection caused by the pits and lands. The pits and lands represent the binary code of the stored information, with pits representing a "1" and lands representing a "0". The laser and sensor work together to interpret the changes in reflection and convert them into digital signals that can be processed by a computer or other device.

To know more about Optical discs click this link -

brainly.com/question/30772025

#SPJ11

To determine the distance d at which the sound from the speakers first produces destructive interference at the listener's location, we can use the formula:

d = (n + 1/2) * λ / 2

where n is the number of wavelengths between the speakers and the listener, λ is the wavelength of the sound, and the factor of 1/2 is added because the sound waves need to travel half a wavelength difference to destructively interfere.

Assuming that the speakers are emitting sound of frequency f, and the speed of sound in air is v, then the wavelength λ can be calculated as:

λ = v / f

Let's assume that the speakers are 1 meter apart and the speed of sound in air is approximately 343 m/s. If the frequency of the sound is 440 Hz, then:

λ = 343 m/s / 440 Hz = 0.78 m

Now, we can plug this value of λ into the formula for d to calculate the distance at which the sound waves destructively interfere:

d = (n + 1/2) * λ / 2

For the first point of destructive interference, n = 0, so:

d = (0 + 1/2) * 0.78 m / 2 = 0.195 m

Therefore, the distance at which the sound from the speakers first produces destructive interference at the listener's location is 0.195 meters or approximately 19.5 centimeters.

To know more about destructive interference click this link -

brainly.com/question/31857527

#SPJ11

Answer: A

Explanation:

The more current flows through a bulb, the brighter the bulb and vice versa. Resistance and current are inversely proportional to each other. Since 100W lamp is brighter, more current flows through it, thus meaning that its resistance is lower than that of the 25W lamp.

The electrical resistance of the 100-W lamp is Less. The correct option is A.

The electrical resistance of a lamp is determined by its physical properties such as the length and cross-sectional area of its filament. A 100-W lamp glows brighter than a 25-W lamp because it is designed to dissipate more power as light energy, indicating that the 100-W lamp has a lower resistance than the 25-W lamp.

This is because, according to Ohm's Law, the power dissipated by a resistive element is equal to the square of the current passing through it multiplied by its resistance. If the power is increased, the current passing through the lamp will also increase, and in order to maintain the same voltage across the lamp, the resistance must decrease. Therefore, the electrical resistance of the 100-W lamp is less than that of the 25-W lamp.

Therefore the correct option is A.

To know more about resistance , refer here:

https://brainly.com/question/30669051#

#SPJ11

The color change in cars due to the Doppler effect is too minuscule to be detected by the human eye because cars move at a much slower speed than light. Therefore, we do not perceive cars as bluer when they approach or redder when they recede.

We need to understand the phenomenon of the Doppler effect. The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the wave source. In the case of sound waves, this effect is what causes an ambulance siren to sound higher pitched as it approaches and lower pitched as it moves away. However, the Doppler effect also applies to light waves, including the colors we see in the visible spectrum. When a car is approaching us, its headlights emit light waves that are compressed, or "squeezed," because the car is moving toward us. This compression causes the light waves to appear slightly bluer than they would if the car were stationary.

The Doppler effect does cause light waves to shift slightly in color as objects move toward or away from us, but the effect is generally too small to be noticeable with cars and other everyday objects. The reason we don't see cars as bluer when they approach and redder when they recede is due to the Doppler effect, which mainly affects sound and electromagnetic waves, like light. However, the speed of cars is much slower compared to the speed of light, making the color change imperceptible to our eyes.

To know more about Doppler effect visit :-

https://brainly.com/question/30761545

#SPJ11

A) The elastic potential energy stored in the spring is 25 J. B) The speed of the mass as it passes through the equilibrium point is 2.58 m/s.

A) To find the elastic potential energy stored in the spring, use the formula:
Elastic potential energy (PE) = (1/2)kx^2
Where k is the spring constant (500 N/m) and x is the displacement from the equilibrium length (0.1 m).
PE = (1/2)(500)(0.1)^2
PE = 25 J
B) The elastic potential energy will be converted to kinetic energy when the spring is released. Use the formula:
Kinetic energy (KE) = (1/2)mv^2
Where m is the mass (0.75 kg) and v is the velocity.
Since PE = KE, we can find the velocity:
25 J = (1/2)(0.75 kg)v^2
Solve for v:
v = 2.58 m/s

Learn more about spring constant here:

https://brainly.com/question/29975736

#SPJ11

The tangential acceleration of a point on the edge of the wheel 2.0 s after it has started accelerating is 28.563 m/s².

Diameter of the wheel, d = 61 cmxxsw

Radius of the wheel, r = d/2 = 61/2 cm = 0.305 m

Initial angular velocity, ω₁ = 120 rpm

Final angular velocity, ω₂ = 280 rpm

Time taken, t = 4 s

To find;

Tangential acceleration (aT) 2 seconds after starting acceleration

The formula for the angular acceleration is given as; a = (ω₂ - ω₁) / t

We have,ω₁ = 120 rpm

ω₂ = 280 rpm

t = 4 sa = (280 - 120) / 4= 40 rad/s²

Now, the tangential acceleration is given as;

aT = rαaT = r × (ω₂² - ω₁²) / 2t

Let's calculate ω₂² and ω₁²ω₂² = (280 × 2π / 60)²= (28π / 3)²ω₁² = (120 × 2π / 60)²= (4π)²

Now, the tangential acceleration at t = 2 s will be;

aT = r × (ω₂² - ω₁²) / 2taT = 0.305 × [(28π / 3)² - (4π)²] / 2×2aT = 28.563 m/s²

You can learn more about acceleration at: brainly.com/question/2303856

#SPJ11

5m/s² is the minimum acceleration of the body.

To determine the minimum acceleration of the body, we can use Newton's second law, which states that the force acting on a body is equal to its mass multiplied by its acceleration.

Given that two forces of 10N and 20N are acting on a body of mass 2kg, we can calculate the net force acting on the body as follows:

Net force = 20N - 10N = 10N

Now, we can use Newton's second law to calculate the minimum acceleration of the body:

Net force = mass x acceleration

10N = 2kg x acceleration

Rearranging the equation, we get:

Acceleration = 10N / 2kg

Acceleration = 5m/s²

Therefore, the minimum acceleration of the body is 5m/s².

It is important to note that this is the minimum acceleration because it assumes that the forces are acting in the same direction. If the forces were acting in opposite directions, the net force would be smaller and the acceleration would be less than 5m/s².

Know more about Newton's second law here:

https://brainly.com/question/25545050

#SPJ11

The wavelength is equal to 15 meters, which is twice the length of the medium, this standing wave pattern has a wavelength of 7.5 meters.

In a standing wave, the wavelength is related to the length of the medium and the number of antinodes (or nodes) formed. The wavelength is equal to twice the length of the medium divided by the number of antinodes. Therefore, we can determine the standing wave with a wavelength of 7.5 meters by finding a pattern that satisfies this condition.

Let's consider the possible standing wave patterns given in the image below:

O--O--O--O--O--O--O

|  |  |  |  |  |  |

O  O  O  O  O  O  O

In this diagram, the "O" represents a node, where there is no movement in the wave, and the "|" represents an antinode, where there is maximum displacement. The distance between two adjacent nodes or antinodes is half the wavelength.

To have a wavelength of 7.5 meters, the length of the medium should be an integer multiple of half the wavelength. Looking at the standing wave patterns, we can see that the third pattern satisfies this condition. The length of the medium in this pattern is 15 meters (7.5 meters x 2), and there are two antinodes. Therefore, the wavelength of the standing wave is:

wavelength = 2 x length of medium / number of antinodes

= 2 x 15 meters / 2

= 15 meters / 1

= 15 meters

For more such questions on wavelength visit:

https://brainly.com/question/10728818

#SPJ11

(b) X-rays, ultraviolet, visible, infrared s the correct sequence arranged in order from shorter wavelength to longer wavelength

1. X-rays have shorter wavelengths than ultraviolet, visible, and infrared light.
2. Ultraviolet light has shorter wavelengths than visible and infrared light.
3. Visible light has shorter wavelengths than infrared light.
4. Infrared light has the longest wavelengths among the options.

So, the sequence arranged in order from shorter wavelength to longer wavelength is X-rays, ultraviolet, visible, and infrared.

Learn more about "wavelength":

https://brainly.com/question/10750459

#SPJ11

Answer:

All of the above

Explanation:

A circuit must have wires, a light bulb, a battery and no gaps if u want to light up a bulb.

Hi! It is not possible to have negative drag in a wind tunnel. Drag is a force that opposes an object's motion through a fluid, like air in a wind tunnel. Negative drag would imply a force that assists the object's motion, which is contrary to the definition of drag.

Regarding question 53 options, oscillating refers to a repeated back-and-forth motion, like a pendulum. A standing wave occurs when two waves of equal amplitude and frequency interfere with each other, resulting in a wave that appears to be stationary. A stable jump is a phenomenon where an object experiences a rapid and controlled transition between two distinct states.

In the context of wind tunnel experiments, these terms may describe different fluid flow patterns or behaviors observed.

However, they do not relate to the concept of negative drag, which remains an invalid concept in fluid dynamics.

To know more about negative drag please visit..

brainly.com/question/15276310

#SPJ11

Option C, its speed doubled, and the acceleration and kinetic energy remain the same.

The momentum of a truck is the product of its mass and velocity. If the momentum of the truck is increased by a factor of 2, then its velocity must also increase by a factor of 2 to maintain the same mass. This means that option C, its speed doubled, is correct.
Acceleration is the rate at which an object's velocity changes over time. It is directly proportional to the net force acting on an object and inversely proportional to its mass. Therefore, if the weight of the truck does not change, its acceleration will not change either, making option A incorrect.
On the other hand, the kinetic energy of an object is directly proportional to its mass and the square of its velocity. Therefore, if the velocity of the truck doubles, its kinetic energy will increase by a factor of 4. This means that option D, its kinetic energy doubled, is also incorrect.

To know more about acceleration visit:
https://brainly.com/question/12550364

#SPJ11

The decibel (dB) is a logarithmic unit used to express the ratio of two values of a physical quantity, typically power or intensity.

In the case of sound, the decibel scale is used to measure the intensity of sound waves, with the reference level set to the threshold of human hearing (approximately 20 microPascals).

The faintest sound that can be detected by the human ear is typically around one decibel, although this can vary depending on factors such as age and hearing loss.

Normal conversation typically measures around 60 decibels, which is equivalent to the sound level of background music, an air  or a dishwasher. Sounds that are louder than 85 decibels can be harmful to hearing if exposure is prolonged, and sounds above 120 decibels can cause immediate damage. Some examples of sounds that measure above 120 decibels include a jet engine at takeoff, a gunshot, or fireworks.

By understanding the decibel scale and the typical sound levels associated with everyday activities, individuals can take steps to protect their hearing and avoid exposure to harmful noise levels. This can include using earplugs or earmuffs when working in noisy environments, turning down the volume on headphones and speakers, and taking breaks from noisy activities to give the ears time to recover.

Learn more about decibel here:

https://brainly.com/question/29310023

#SPJ11

Answer:

force is the one keeps it moving

Explanation:

the unbalanced force is the water that's why it sloshes over the side of

the cup and onto the floor.

When a proton is released from Point A, the direction of the electric force vector acting on it is towards Point C, as it moves from higher potential to lower potential.

Similarly, when an electron is released from Point B, the electric force vector acts in the opposite direction, towards Point A. For the two electrons released from Points B and C, we can say that they experience unequal forces as they move towards Point A. The electron released from Point B experiences a greater force due to the closer proximity to Point A and the stronger potential gradient. However, we cannot determine the exact relationship between the two forces without knowing the distance between the two points and the magnitude of the potentials.
When a proton is released from Point A, the electric force vector acting on it will be in the direction of the electric field, which is perpendicular to the equipotential lines and from high to low potential.

For an electron released from Point B, the electric force vector will be in the opposite direction of the electric field, as electrons experience force opposite to the field direction.

When electrons are released from Points C and D, they will experience electric forces based on the strength of the electric field at their respective locations. If the equipotential lines are evenly spaced, electrons at both points will experience equal forces. If not, the relationship between the forces cannot be determined without further information.

To know about electron :

https://brainly.com/question/12001116

#SPJ11