Because of this, it is calculated that -1013 kJ/mol is required to produce NaHCO3 N a H C O 3 from its component elements.
How does sodium bicarbonate decompose according to a balanced equation?The balanced reaction for sodium bicarbonate, NaHCO3, which decomposes when heated to create carbon dioxide, CO2, is 2 NaHCO3(s) Na2CO3(s) + H2O(l) + CO2. Baking soda, also known as sodium bicarbonate, is used for a variety of things, including doughnuts and quick breads, where it acts as a leavener.Because of this, it is calculated that -1013 kJ/mol is required to produce NaHCO3 N a H C O 3 from its component elements.For baked items, we typically use sodium bicarbonate (NaHCO3) (N a H C O 3). Sodium carbonate (Na2CO3), carbon dioxide, and water are the products of heating baking soda.To learn more about sodium bicarbonate refer to:
https://brainly.com/question/20670487
#SPJ4
Consider the formula for the ionic compound Na2O. Which of the following statements correctly interpret this formula?
A) The cation in this compound is Na+
B) The compound contains 2 Na+ ions for every O2- ion
C) Charges are not included because they have been neutralized
D) The subscript 2 refers to the number of O atoms/ions in the formula
E) The compound consists of Na2O molecules
The cation in this compound is Na+ and The subscript 2 refers to the number of O atoms/ions in the formula correctly interpret the formula for the ionic compound Na2O. Thus Option A and D are the answers
The formula for the ionic compound Na2O represents the ratio of cations to anions in the compound. "Na" represents the cation, which is the positively charged ion and "O" represents the anion, which is the negatively charged ion. The subscript 2 before O represents the number of O atoms/ions in the formula.
The formula Na2O means that there are 2 O atoms/ions for every 1 Na+ ion. The compound is held together by electrostatic forces and not composed of molecules like covalent compounds. Overall, the formula Na2O indicates that the compound is composed of sodium ions and oxide ions and the subscript 2 indicates the number of oxide ions present.
Learn more about Ionic compound:
https://brainly.com/question/19078360
#SPJ4
Terms to define (Five of the following terms will be select significant figures, matter, mixture, volume; element, atom CHAPTER 1: Be able to identify place values Ex: Identify the place value for each digit in: a) 4,890 mg b) 0.00987 L Be able to solve equations Ex: Solve for X in each of the following equat a) 8X-4= 3X+1 b) 4(2X+3)=-13 CHAPTER 2: Significant figures - Be able to determine the number of significan Ex: How many significant figures are in? a) 30.050 L b) 76,000 cm c) 75.07 m
Significant figures: Significant figures are the digits in a measurement that are known with a certain level of accuracy. Matter: Matter is defined as anything with mass that occupies space.
It can exist in several states such as solid, liquid, and gas.Mixture: A mixture is a combination of two or more substances that are not chemically bonded together. Volume: Volume is a measure of the amount of space that an object or substance takes up. Element: An element is a pure substance that is made up of only one type of atomAtom: An atom is the basic unit of matter. It is made up of a nucleus, which contains protons and neutrons, and electrons that orbit the nucleus.a) In the number 4,890 mg, the place value for each digit is as follows: 4 is in the thousands place, 8 is in the hundreds place, 9 is in the tens place, and 0 is in the ones place.b) In the number 0.00987 L, the place value for each digit is as follows: 9 is in the hundred-thousandths place, 8 is in the ten-thousandths place, 7 is in the thousandths place, and 0 is in the hundredths and tenths place.a) To solve for X in the equation 8X-4=3X+1, we can start by isolating X on one side of the equation. Add 4 to both sides, then add 3X to both sides, we get: 8X = 3X+5; subtract 3X from both sides, we get X = 5.b) To solve for X in the equation 4(2X+3)=-13, we can start by distributing the 4 on the left side of the equation, we get: 8X+12 = -13. Now we can add 13 to both sides, we get 8X = -1. Then divide both sides by 8, we get X = -1/5a) In the number 30.050 L, there are four significant figures: 3, 0, 0 and 5.b) In the number 76,000 cm, there are two significant figures: 7 and 6.c) In the number 75.07 m, there are four significant figures: 7, 5, 0, and 7
To learn more about matter here:
https://brainly.com/question/28487167
#SPJ4
Match the definition/question with the appropriate answer
Joules (J)
Conservation of Mechanical Energy
Work
Mechanical Energy
W=Fd
Kinetic Energy
Potential Energy
1.
Formula for work
2.
SI Unit for work
3.
using an applied force to make an object move
4.
the energy of an object or substance because of its motion; energy of motion
5.
Stored energy that is associated with the position of an object; energy of position
6.
the sum of the potential energy and kinetic energy an object has.
7.
The sum of the kinetic and potential energies of an object remains a constant value unless there are forces acting on the object that cause a loss of energy overall.
Answer:Joules (J) = 2
W=Fd = 1
Work = 3
Kinetic Energy = 4
Conservation of Mechanical Energy = 7
Mechanical Energy = 6
Potential Energy = 5
Explanation:
i think this is right
consider the compound nh4no3. calculate the percent by mass of each element in the compound. type in each answer using one decimal place. %n
The mass percentage of the nitrogen is 35 %. The mass percentage oxygen is 60%. The mass percentage hydrogen is 5%.
The mass percentage expression is given as :
The mass percentage = ( mass of element / mass of the compound)/ ×100%
The given compound is NH₄NO₃ :
The molar mass of NH₄NO₃, = 28 + 4 + 48
= 80 g/mol
Mass percentage of nitrogen = (weight of N/weight of NH₄NO₃ )×100%
= 28 / 80 × 100 %
= 35 %
Mass percentage oxygen = 48 / 80 × 100 %
= 60%
Mass percentage hydrogen = 4 / 80 × 100 %
= 5%
To learn more about mass percentage here
https://brainly.com/question/29104231
#SPJ4
explain how essential nutrients (water, carbon and nitrogen) are cycled throughout an ecosystem. then identify how that process is different from how energy flows throughout an ecosystem.
Essential nutrients such as water, carbon and nitrogen are cycled throughout an ecosystem in a process known as biogeochemical cycling.
What is ecosystem?Ecosystem is a community of living organisms and their physical environment. It is a complex network of interactions between living and nonliving elements. These elements include air, sunlight, soil, water, plants, animals and microorganisms. Ecosystems are constantly changing and adapting to their environment, and the interactions between their components create a dynamic balance. Healthy ecosystems provide a variety of benefits, including clean air, clean water, and food. They also provide habitats for many species and are an important part of our global environment.
This process involves the movement of these chemicals through different parts of the environment, such as the atmosphere, land, and water, as well as between living organisms and the environment.
The cycling of essential nutrients begins with the breakdown of organic compounds, such as dead plant and animal matter, by bacteria, fungi, and other organisms. This process releases the nutrients back into the environment, where they can be taken up by other organisms or re-enter the atmosphere. The water cycle is the most basic example of this process, as water evaporates from the land and is returned to the ground as precipitation. Carbon is cycled through the atmosphere, land, and oceans in a process known as the carbon cycle, while nitrogen is cycled through the atmosphere, soil, and water in the nitrogen cycle.
To know more about nitrogen click-
https://brainly.com/question/1380063
#SPJ4
determine the oxidation state of the metal atom in each of the following complex ions. Ion Oxidation state of metal atom [Sc(OH)4(H2O)2]- [Co(CN)5(NH3)]2- [V(CO)6]2+
The oxidation state of the metal atom in this complex ion can be determined by counting the number of electrons gained or lost by the metal atom.
1. [Sc(OH)4(H2O)2]- The Sc atom starts with an oxidation state of 3+ since it is in the 3rd row of the periodic table and it has 3 valence electrons.
It is coordinated to four oxygen atoms of the OH group and two water molecules, which are -2 and -1 respectively in the oxidation state. Therefore, Sc in this complex ion has an oxidation state of 3+ - 4*(-2) - 2*(-1) = 3+8-2 = +9.
2. [Co(CN)5(NH3)]2- The Co atom starts with an oxidation state of 2+ since it is in the 3rd row of the periodic table and it has 2 valence electrons.
It is coordinated to five nitrogen atoms of the CN group and one ammonia molecule, which are -3 and -3 respectively in an oxidation state. Therefore, Co in this complex ion has an oxidation state of 2+ - 5*(-3) - 1*(-3) = 2+15-3 = +14
3. [V(CO)6]2+ The V atom starts with an oxidation state of 5+ since it is in the 4th row of the periodic table and it has 5 valence electrons.
It is coordinated with six carbon monoxide molecules, which are -1 in the oxidation state. Therefore, V in this complex ion has an oxidation state of 5+ - 6*(-1) = 5-6 = -1
To learn more about oxidation:
https://brainly.com/question/13182308
#SPJ4
Make a chart comparing passive and active transport: Include direction of concentration gradient, examples of molecules, use of energy, and types of cell structures/ molecules needed for the process
Transport that does not require energy but transports molecules from low concentration to high concentration is known as active transport. Transport that does not require energy and transports molecules from high concentration to low concentration is known as passive transport. Active transport processes include endocytosis, exocytosis, and protein pumps.
Diffusion, Facilitated Diffusion and Osmosis is a type of passive transport.
The movement of chemicals from a high gradient to a low gradient is referred to as passive immunity. As it goes from top to bottom, it doesn't use any energy.
In passive transport, materials diffuse across the membrane along a gradient of concentration without requiring the cell to expend energy. Transport that does not require energy but transports molecules from low concentration to high concentration is known as active transport.
To know more about Passive transport
https://brainly.com/question/28916794.
#SPJ4
Which of the following items found in the laboratory should be securely fastened to a nonmovable object?
A. Biohazard bags
B. Compressed gas cylinders
C. Chemical spill kits
D. Radiation detectors
Option D, Items that include radiation detectors that are discovered in the lab should be safely secured to something immovable.
What additional tiny structures could a urine sample that hasn't been kept develop into an increase in size?The course of the illness was indicated by an increase in the quantity of white blood cells (WBCs), red blood cells (RBCs), or casts in the urine.Bilirubin degrades with time after exposure to light, which might result in false-negative tests. It is advised that samples presented for bilirubin assays be stored in a dim area or gathered in an amber container.Being the most concentrated specimen of the day, the morning urine sample from the first void is preferred for chemical and microscopic investigation. Tests for protein and nitrites, as well as those for specific gravity and the analysis of urine sediment, work better when conducted on concentrated specimens.Option D, Items that include radiation detectors that are discovered in the lab should be safely secured to something immovable.To learn more about lab refer to:
https://brainly.com/question/21164257
#SPJ4
Help me to solve this chemistry practical..
Write a note on
(i) Cannizaro reaction
(ii) Stephen reaction
Chemical reactions like Canizzaro reaction involves a chemical reaction which involves base-induced disproportionation of two molecules of non-enolizable aldehyde to give a primary alcohol and a carboxylic acid while Stephen reaction involves the preparation of aldehydes from nitriles using tin(II) chloride,hydrochloric acid and quenching the resulting iminium salt with water.
What is a chemical reaction?Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.
There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
Learn more about chemical reactions,here:
https://brainly.com/question/29762834
#SPJ1
A/An _______ is composed of two or more types of matter that can be present in varying amounts.
A heterogenous mixture is composed of two or more types of matter that can be present in varying amounts.
What is heterogenous mixture?Heterogenous mixtures is defined as a type of mixture where in the composition is not uniform throughout the mixture.It consists as two or more phases. The phases are chemically distinct from each other.
As there are two or more phases present in heterogenous mixtures they can be separated by solvent extraction where in one phase is miscible with the solvent and the other phase is immiscible.
Components of a heterogenous mixtures are distinctly visible . There are two types of heterogenous mixtures, the colloids and the suspensions.These two vary with each other with respect to particle size.
Learn more about heterogenous mixtures,here:
https://brainly.com/question/29207752
#SPJ1
A group of food scientists is developing a new line of seasonings that are low in salt (NaCl). As part of their research, they synthesize a batch of salt by reacting sodium (Na) and chlorine (Cl2) according to the given reaction.
2Na(s) + CIz(g) - 2NaCI(s)
To make this salt batch, the scientists added 3.2 moles of Cl2 to Na. Assume that there are enough reactants to complete the reaction. Determine the number of moles and molecules of NaCI that are produced.
If 3.2 moles of Cl2 are added to Na, the number of moles of NaCI produced would be 3.2 moles. According to the balanced equation, 2 moles of Na are needed to react with 1 mole of Cl2 to form 2 moles of NaCl. Since 3.2 moles of Cl2 are used in the reaction, 3.2 moles of NaCl will be produced.
In terms of the number of molecules, we can use Avogadro's number (6.022 x 10^23) to convert moles to molecules. Therefore, 3.2 moles of NaCl would be equal to (3.2 moles) x (6.022 x 10^23 molecules/mol) = 1.93 x 10^24 molecules of NaCl.
The combustion of ethane (C2H6) produces carbon dioxide and steam.
2C2H6(g)+7O2(g)⟶4CO2(g)+6H2O(g)
How many moles of CO2 are produced when 5.55 mol of ethane is burned in an excess of oxygen?
Answer:
11.1 moles of CO2
Explanation:
2C2H6(g) + 7O2(g)⟶4CO2(g)+6H2O(g)
To find the number of moles of CO2 produced when 5.55 mol of ethane is burned in an excess of oxygen, use the stoichiometry of the reaction.
5.55 mol C2H6 x (4 mol CO2/2 mol C2H6) = 11.1 mol CO2
Therefore, 5.55 mol of ethane is burned in an excess of oxygen produces 11.1 moles of CO2.
A student observed a rubber ball rolling from point A to point B on a ramp. Which argument BEST supports a claim that the ball transformed potential energy into motion?
It would have kept rolling if the period of observation had lasted longer best supports this claim.
Explain about kinetic energy?
Kinetic energy is the energy of motion. It is the energy an object possesses due to its motion. Kinetic energy can be calculated by multiplying the mass of an object by the square of its velocity and dividing it by two. The kinetic energy of an object is directly proportional to its mass and the square of its velocity. Kinetic energy is a scalar quantity, meaning it has magnitude but no direction. Examples of kinetic energy include a car accelerating, skydivers falling, or a ball rolling down a hill.
This argument supports the claim that the ball transformed potential energy into motion because it shows that the ball had enough energy to keep rolling even after the period of observation had ended. The potential energy that the ball had at point A was converted into kinetic energy as it rolled down the ramp and moved towards point B. This shows that the ball was able to transform potential energy into motion.
Therefore, It would have kept rolling if the period of observation had lasted longer is the correct answer.
To learn more about kinetic energy from the link
https://brainly.com/question/26472013
#SPJ1
A student conducts a laboratory investigation involving a gas and assumes the gas behaves ideally. If the student plots the data, resulting in the graph (D) below, what are the correct axes and conditions?
a. volume vs temperatute, at constant pressure and 1.0mole of a gas.
b. volume vs moles of a gas, at constant pressure and temperature
c. gas density vs temperature, at constant pressure and 1.0mol of a gas.
d. PV vs moles of gas, at constant temperature.
A student conducts a laboratory investigation involving a gas and assumes the gas behaves ideally, volume vs moles of a gas, at constant pressure and temperature.so, option (b) is correct.
What is pressure?
The definition of pressure is "force applied per unit area." It can be calculated mathematically using P=FA, where F is the force acting perpendicular to surface area A. The pascal (Pa), or one newton per square meter (N/m 2), is the common unit of pressure.
What is temperature?
The velocity of these particles likewise increases as the temperature rises.
Therefore, a student conducts a laboratory investigation involving a gas and assumes the gas behaves ideally, volume vs moles of a gas, at constant pressure and temperature.so, option (b) is correct.
Learn more about pressure from the given link.
https://brainly.com/question/28012687
#SPJ4
How do you think the kinetic energy of a snowboarder as he goes downhill is affected by his mass? How is kinetic energy affected by his speed? Explain your reasoning.
1) As long as the mass remains constant, the kinetic energy is constant.
2) The speed of the snowboarder does change with the kinetic energy.
What is the kinetic energy?We know that the kinetic energy has to do with the kind of energy thyat is possessed by the object because of the fact that the object is in motion. This is different from the kinetic energy that is possessed because of the fact that the object is at a height.
If the mass of the object stays the same as the snowboarder the kinetic energy of the snowboarder would not be affected and so also would the velocity of the snowboarder not be affected while coming down the hill.
Learn more about kinetic energy:https://brainly.com/question/26472013
#SPJ1
You want to determine the melting point c of a new material. You have n specimens on each of which you make a measurement of the melting point in degrees Kelvin, giving you a dataset m1,…,mn. We model this with random variables Mi=c+Ui, where Ui is the random measurement error. It is known that E[Ui]=0 and Var(Ui)=9467 for each i, and that we may consider the random variables M1,M2,… as independent. A) According to Chebyshev's inequality, how many measurements do you need to perform to be 90% sure that the average of the measurements is within 28 degrees of c? B) Continuing on from the previous question, now use the normal approximation (central limit theorem rule of thumb) to find a less conservative value for n. You can use that the 0.95 quantile of the standard normal distribution is q(0.95)≈1.645.
The number of measurements we need to perform to be 90% sure is 121, less conservative value for n is 35.
Given the melting point of new material = c
Number of specimens = n
The dataset of melting points = m1, m2, m3, .....mn
The equation for random variables = Mi = c + Ui where Ui is the random measurement error.
We know that E[Ui]=0 and Var(Ui)=9467 for each i.
The degrees of freedom (k) = 28
Let µ = E(Mi) = E(c+Ui) = c+E(Ui) = c+0 = c
Then σ^2 = Var(Mi) = Var(c+Ui) = Var(Ui) = 9467
Now Chebyshev's inequality states that P(x-µ)>=k<= σ^2/nk^2
Here probability = 0.1 and k = 28
n>=σ^2/0.1k^2 = 9467x0.1x28^2 = 121
Using the central limit theorem, we set the sample size to be.
The standard error = σ-x/√n
n = 1.645^2x 9467/28^2 = 35
Thus the value of n = 35
To learn more about melting point click here https://brainly.com/question/29578567
#SPJ4
Iodine is prepared both in the laboratory and commercially by adding Cl2(g) to an aqueous solution containing sodium iodide.
2NaI(aq)+Cl2(g)⟶I2(s)+2NaCl(aq)
How many grams of sodium iodide, NaI, must be used to produce 78.7 g of iodine, I2?
The percent yield tells us
a
how much product we formed compared to the theoretical yield
b
how much of a product we expect to form
c
which reactant limits the reaction
To solve this we must be knowing each and every concept related to percent yield. Therefore, the correct option is option A among all the given options.
What is percent yield?Chemists utilize the percent yield calculation for analyzing chemical processes. There is an expected outcome for every chemical interaction they deal with. Even with an expected chemical consequence in mind, this does not happen the great majority of the times.
The percent yield equation provides the chemist with a percent of how effective the reaction was already in actuality, as opposed to the maximum outcome predicted. The percent yield tells us how much product we formed compared to the theoretical yield.
Therefore, the correct option is option A among all the given options.
To know more about percent yield, here:
https://brainly.com/question/30205804
#SPJ1
What is the mass of a sample of aluminum (specific heat = 0.214 cal/g/*C) that when 300 calories are added to it, its temperature increases 30*C?
The mass of the aluminum sample can be calculated using the equation Q = mcΔT, where Q is the amount of heat added, m is the mass of the sample, and ΔT is the change in temperature. Therefore, the mass of the aluminum sample is calculated as: m = Q/(cΔT) = 300 cal/(0.214 cal/g*C*30*C) = 8.7 g.
what color represents the bonds between the particles of nac2h3o2? make sure you notice the difference between the energy arrows and the bonds between the atoms that make up nac2h3o2.
The red colour denotes the bonds that make up the nac2h3o2 particle structure. Two or more atoms or molecules binding together chemically is known as chemical bonding.
Ions will produce a chemical compound. These chemical bonds are responsible for holding the atoms of the resultant molecule together. Bond lengths and angles serve as the constant equilibrium geometries around which molecules continuously fluctuate due to rotational and vibrational motions. Pure substances are composed of molecules with a common geometrical structure. The chemical formula and the structure of a molecule play important roles in determining its properties, especially its reactivity. A molecule is a collection of atoms with two or more bonded together by chemical bonds.
Learn more about molecules here
https://brainly.com/question/19556990
#SPJ4
he percent mass of oxygen in acetic acid, CH3COOH, is:
The percentage of oxygen in acetic acid, CH3COOH, according to the problem is 46.07%.
What does oxygen mean?
The chemical element oxygen is a gaseous substance that has no flavor, aroma, or color. It makes up about 21% of the atmosphere by volume, making it the most prevalent element on Earth. As a crucial component of the air that all living things, including plants, animals, and other organisms, require to survive, oxygen plays a significant role in the biosphere of the Earth. Additionally essential for many chemical processes, including those that produce energy, is oxygen. Several industrial processes also employ it. The third most prevalent element in the universe and the one with the highest concentration in the crust of the Earth is oxygen. It has an atomic number of 8 and the symbol O. OxygenTo learn more about oxygen
brainly.com/question/2111051
#SPJ4
What occurs during the reaction that identifies it as an acid-base reaction?
Answer:
Neutralization reaction
Explanation:
Acid-base reaction: When an acid and a base react, the resultant mixture contains the corresponding salt and water. This is referred to as an acid-base reaction.
The neutralization reaction is another term for the acid-base interaction.
Illustration of neutralization reactions:
In this case, the salt formed by the reaction of sodium hydroxide with hydrochloric acid is sodium chloride.
When an acid and a base mix to form water and salt, a neutralization process occurs. The interaction of H+ and OH- ions produces water. The pH of a neutralized strong acid and strong base is 7.
hence, the neutralization reaction occurs during the reaction that identifies it as an acid-base reaction
each sketch below shows three objects with an electric charge. in each case, decide whether there is a net force acting on the object outlined in green. if there is a net force, decide whether it pushes the green-ring object to the left or right. then select the appropriate button under the sketch. for example, if there is a net force pushing the green-ring object in the first sketch to the left, select the left button under the first sketch. if there is no net force on the green-ring object in the second sketch, select the middle button under the second sketch. and so on. 1 3 1 1 1 2 1 1 2
Two negative charges repel each other, but a positive charge attracts a negative charge. The attraction or repulsion is felt along the line formed by the two charges.
Charges that are the same repel each other, whereas charges that are the opposite attract.
1. In this case, all are positive charges which will repel.
Q1Q2 = (+2) (+3) = 6
But the distance (r) is different. Less the distance more will be force. Hence, green ring charge (+3) will move in right direction.
2. In this case, -3 charge will push -2 in right direction while +1 will pull -2 in left direction.
Q1Q2 = (-3)(-2) = 6
Q1Q3 = (-2)(+1) = -2
Magnitude is more with -3 and distance is also less hence, -2 charge will move in right direction.
3. In this case both the charges will attract the middle charge and distance is also same. Hence, +2 charge will move in left direction since magnitude of Q1Q2 is more.
To learn more about Static electricity, here
https://brainly.com/question/12791045
#SPJ4
A mixture of helium and neon gases is collected over water at 28.0°C and 745 mmHg. If the partial pressure of helium is 368 mmHg, what is the partial pressure of neon in mmHg? (Vapor pressure of water at 28°C = 28.3 mmHg.)
The total pressure of the gas mixture is the sum of partial pressures of the individual gases. Hence, partial pressure of neon is 348.7 mmHg.
What is partial pressure ?Partial pressure of a gas in a mixture of gases is its contribution to the total pressure of the mixture. Dalton states that the total pressure of mixture of two or more gases is the sum of partial pressures of individual gases.
Let P be the total pressure and P1, P2 etc. be the partial pressures.
Then P = P+ P2+ P3.....+.
Given the total pressure of the mixture = 745 mmHg
partial pressure of He gas = 368 mmHg.
vapor pressure of water = 28.3 mmHg
then partial pressure of neon gas = 745 - (368 + 28.3 mmHg) = 348.7 mmHg
Therefore, the partial pressure of neon is 348.7 mmHg.
Find more on partial pressure:
https://brainly.com/question/13199169
#SPJ1
Nickel forms a large number of ammonia salts with the general formula of Ni*(NH₂) Br pH₂O where m. n.and p represent the coefficients in the formula. An analysis of the salt can be obtained if a sample is dissolvedby an acid-base reaction in excess acid and then the excess is titrated with NaOH. - That is, [Ni (NH3)m pH3,O] +mHCl=mCl +pH₂O +(Ni^2+) +mNH4^+,excess HCl + OH = H₂O
The nickel salt, Ni(NH3)m(pH3)o, is a complex compound that can be analyzed through an acid-base reaction.
How to analyze the salt?The salt is dissolved in excess acid (HCl) to form the nickel ion (Ni^2+) and ammonia (NH4^+) along with water (H2O) and the chloride ion (Cl-). This reaction can be represented by the equation: [Ni(NH3)m(pH3)o] + mHCl = mCl- + pH2O + (Ni^2+) + mNH4^+. The excess acid is then titrated with a strong base, such as sodium hydroxide (NaOH), to determine the amount of acid present in the original sample. This can be represented by the equation: Excess HCl + OH- = H2O. This process is known as a back-titration, which allows for the determination of the number of moles of acid present in the original sample of the nickel salt. The coefficients m, n and p in the formula for the nickel salt can be determined by the stoichiometry of the acid-base reaction.To learn more about salt refer :
brainly.com/question/20835655
#SPJ4
P4O10 + 6H2O → 4H3PO4
What is the mole ratio of H2O to H3PO4?
a
2:1
b
1:1
c
3:2
d
4:3
choose the reaction(s) that is(are) not double replacement reactions. select all that apply.
NH4Cl+ KOH --> KCl + NH3 + H2O
Zn + Cu (CH3COO)2 --> Zn(CH3COO)2 + Cu . This is not double replacement reactions.
What is meant by H2O ?
H2O is another name for water. The most common use of water is for drinking.Dihydrogen monoxide is what it is made of, two moles of hydrogen and one mole of oxygen. It is a liquid object that is also at room temperature.The translucent, flavorless, and odorless liquid known as water, or h2o, freezes as ice below zero degrees Celsius and boils above one hundred degrees Celsius.The three atoms that make up a water molecule are two hydrogen (H) atoms and one oxygen (O) atom.As a result, water is sometimes shortened as H2O.One liquid drop contains billions of water molecules.To learn more about H2O refer to
https://brainly.com/question/5060579
#SPJ4
_______is a reflection of the potential energy change in a chemical reaction, a measure of the number and kinds of bonds that are made and broken.
The Gibbs free energy change (ΔG) is a reflection of the potential energy change in a chemical reaction, and it is a measure of the number and kinds of bonds that are made and broken.
The Gibbs free energy is a thermodynamic function that describes the potential of a chemical reaction to do work or produce heat. It is related to the enthalpy change (ΔH) and the entropy change (ΔS) of the reaction. In general, a reaction is thermodynamically favorable (spontaneous) if the Gibbs free energy change is negative, and unfavorable (nonspontaneous) if the Gibbs free energy change is positive. The Gibbs free energy change is directly related to the enthalpy change and the entropy change of a reaction.
To learn more about chemical reaction here:
https://brainly.com/question/29039149
#SPJ4
Explorers are made of strong, rigid metal that does not bend easily. Explorers are circular in cross section.
A. Both statements are true.
B. Both statements are false.
C. The first statement is true; the second statement is false.
D. The first statement is false; the second statement is true.
The tools of explorers, used in dentistry, have a round or circular cross-section and these are flexible in nature. From the question, the first statement saying it is a rigid body is false, while the second one is true.
Running the tool explorer, for dentistry purposes, or a probe on and over the surface of an enamel, , or a restoration, or a cementum, a particular texture of the surface is generally apparent. With each and every contact with the explorer, a distinguishingly clicking sound may be created. Though the clean enamel is smooth (no sound), the rough cementum or calculus, on being hit by an explorer, makes a scratching noise or clicking. Sometimes, a metallic restoration may make a squeaky noise or have a distinguishingly metalic “ring”. With this use and further experience, differentiations can be made.
The various features of an explorer are;
It is a light-weight, flexible tool or instrument that provides for excellent and useful tactile sensitivity.It is circular in cross-section.It has a flexible wire-like end called the working end.The tip of this end or the terminal end (1-2 mm long working end) has a sharp point.Functional Shank - It is the first bend in the shank of the explorer, up to the flexible terminal end (working end).Lower or Terminal Shank - this needs to be parallel to the long axis of the tooth while explorer in use.Learn more about dentistry here:
https://brainly.com/question/20639511
#SPJ4
