The buildup of sediment where a river empties into a slow-moving or nonmoving body of water is known as a/an
A type of soil made almost entirely of windblown sediment is called _______.
The _______ in soil comes from decaying plants and animals and their waste products.
_______, which is made up of tiny particles and drains water very poorly, is one of the main components of soil.
A type of soil called peat is most likely to form in a/an
Water helps in the development of soil by carrying _______ and nutrients from upper layers to lower layers.
The _______ of nutrients from soil is common in wet environments, like rain forests.
Quartz-rich parent material leads to the development of _______ soils.
The layers of soil composed mainly of organic matter are known as the ______ and _______ horizon.
A layer of soil in which clay, iron, and other elements from the overlying soil accumulates is known as the _______ horizon, or subsoil.






ANSWERS:
river delta.
loess
organic matter
Clay
swamp (or wetland).
minerals
leaching
sandy
O and A
B

Answer:

In order to determine the charge of these elements you'll have to look at their placement in the periodic table by group number.

Explanation:

To further explain this, there is 18 groups of the periodic table.  These groups include:

Group 1: The alkali metals have a 1+ charge for their entire group.

For example: Sodium would have a charge of 1+.

Group 2: The earth alkali metals all have a charge of 2+. For example Mg has a charge of 2+.

Group 3-12: The transitions metals are a little harder to figure the charge of each, if given the compound they are bonded with you can use that to figure it out but only a few have distinct charges. Such as Ag (Silver) only have a 1+ charge. If you are still trying to figure the charge, try making an electron configuration to figure out it's spare electron count or charge.

Group 13: These elements in group 13 have a typical charge of 3+. For example Al has a charge of 3+.

Group 14: These elements in group 14 have a typical charge of 4+. For example Carbon has a charge 4+

Group 15: These elements start the shift towards a negative charge in the table, so for group 15 the elements have a 3- charge. For example Nitrogen has a 3- charge.

Group 16: These elements continue with a negative in group 16 with a negative charge of 2-. For example Oxygen's charge is 2-.

Group 17: The halogen elements in group 17 have a charge of 1-. For example Chlorine has a charge of -.

Group 18: The noble gases in group 18 do not have a charge because they are some of the most stable elements so they're not looking to gain or lose an electron (That is what a charge is basicaly). So, they're charge is none.  

Carbon dioxide + Water Glucose (sugar) + Oxygen CO2 + H2O C6H12O6 + 6O2 Cellular respiration or aerobic respiration is a series of chemical reactions which begin with the reactants of sugar in the presence of oxygen to produce carbon dioxide and water as waste products.

7.66g of ethyl butyrate is produced.

The reaction is

CH₃CH₂CH₂COOH + CH₃CH₂OH ----> CH₃CH₂CH₂COOCH₂CH₃

From 0.0845 mol of butanoic acid we get 0.78 x 0.0845 = 0.66 mol of ethyl butyrate.

The molar mass of ethyl butyrate is 116.16g/mol

So 0.66 x 116.16 = 7.66g

7.66g of ethyl butyrate is produced.

Learn more about esterification here:

https://brainly.com/question/14028062

#SPJ10

Answer:

V = 11 L

Explanation:

To find the missing value, you need to use the Ideal Gas Law. The equation looks like this:

PV = nRT

In this formula,

 ----> P = pressure (atm)

 ----> V = volume (L)

 ----> n = number of moles

 ----> R = constant (0.0821 atm*L/mol*K)

 ----> T = temperature (K)

You have been given all of the values in the correct units. Therefore, you can plug these values into the equation and simplify to find volume. The answer should have 2 sig figs to match the given value with the lowest amount of sig figs.

PV = nRT

(9.4 atm)V = (4.5 moles)(0.0821 atm*L/mol*K)(286 K)

(9.4 atm)V = 105.6627

V = 11 L

The type of crude oil that is considered to be the highest quality for gasoline is West Texas Intermediate (Option B).

Oil is a fossil fuel obtained from Earth's crust, which is fundamental nowadays to generate electricity.

West Texas Intermediate is a highly pure and high-type energy source of crude oil used in industry.

In conclusion, the type of crude oil that is considered to be the highest quality for gasoline is West Texas Intermediate.

Learn more about oil fuel here:

https://brainly.com/question/79954

#SPJ1

HgS will precipitate first when tiny amounts of sulfide ion are slowly added to the solution.

The solubility product constant, Ksp​, is the equilibrium constant for a solid substance dissolving in an aqueous solution. It represents the level at which a solute dissolves in solution.

If Solubility product is greater than the ionic product then no precipitate will form on adding more solute because unsaturated solution is formed.

If Solubility product is lower than the ionic product then excess solute will precipitate out because of the formation of super saturated solution.

Here, Ksp value of HgS is very low. Hence, HgS will precipitate first when tiny amounts of sulfide ion are slowly added to the solution.

Learn more about Ksp here:

https://brainly.com/question/4637627

#SPJ1

Answer:

T₂ = 39.4 °K

Explanation:

Because you are only dealing with volume and temperature, you can use Charles' Law to find the missing value. The formula looks like this:

V₁ / T₁ = V₂ / T₂

In this formula, "V₁" and T₁" represent the initial volume and temperature. "V₂" and "T₂" represent the final volume and temperature. You have been given values for all of the variables except for "T₂". Therefore, by plugging these values into the formula, you can simplify to find the answer.

V₁ = 350 mL                     T₁ = 45 °K

V₂ = 400 mL                     T₂ = ?

V₁ / T₁ = V₂ / T₂                                        <----- Charles' Law formula

(350 mL)(45 °K) = (400 mL)T₂                <----- Insert values into variables

15750 = (400 mL)T₂                                <----- Multiply left side

39.4 = T₂                                                 <----- Divide both sides by 400

Answer:

15 oxygens

Explanation:

Given the partially balanced reaction: [tex]\text{C}_{\text{5}}\text{H}_{\text{10}}+\text{O}_{\text{2}} \rightarrow \text{5C} \text{O}_{2}}+\text{5H}_\text{2}\text{O}[/tex]

The subscripts (small number to the right of each element symbol) are the number of atoms of the element within each compound/molecule, and the coefficients (numbers in front of each compound) represent the number of that molecule involved in one full reaction (if the equation were balanced).

The product side of the reaction is on the right of the arrow.

To determine the total number of Oxygens on the product side, we need to identify how many Oxygens are in each molecule (the subscript on the Oxygen), and then multiply times the number of that molecule that would be involved (Coefficient of the compound containing Oxygen).  There are multiple compounds on the right side of the equation that contain Oxygen, so we'll need to add together the number of Oxygens each part contributes.

[tex]\text{C}_{\text{5}}\text{H}_{\text{10}}+\text{O}_{\text{2}} \rightarrow \bold{5}\text{C} \bold{O_{2}}+\bold{5}\text{H}_\text{2}\bold{O}[/tex]

[tex]\text{\# reactant-side Oxygens}=\bold{5}\text{C} \bold{O_{2}}+\bold{5}\text{H}_\text{2}\bold{O}\\=5 \text{ CO}_{\text{2}}\text{ molecules} *\frac{\text{2 Oxygens}}{\text{1 CO}_{\text{2}}\text{ molecule}}+5 \text{ H}_{\text{2}}\text{O molecules} *\frac{1\text{ Oxygen}}{\text{1 H}_{\text{2}}\text{O molecule}}\\=10\text{ Oxygens}+5\text{ Oxygens}\\=15\text{ Oxygens}[/tex]

Answer:

Conducting Experiments

The Correct option is A. octahedral

because the molecule has 6 sigma bonds that results into sp³d² hybridization.

and octahedral structure is formed

Answer:

Octahedral

Explanation:

You have a atom connected to 6 others and each of the bonds are similar

Answer:

The answer for this problem would be "b. A 10 mL graduated cylinder".

Explanation:

The reason for this is because with a instrument that is closer to the value you're trying to measure, the more precise it will be.

For example using a teaspoon to measure something rather than a cup.

Decreasing the separation between the two magnets will result in increase in the magnetic force between two magnets.

This is referred to a substance which produces magnetic field and result in the attraction and repulsion of certain types  of things.

Increase in the separation will reduce the magnetic force and vice versa which is why option A was chosen.

Read more about Magnet here https://brainly.com/question/14997726

#SPJ1

Avogadro's law states that in each mole of a substance, there are [tex]6.022 \times 10^{23}[/tex] particles.

This means that 15000 atoms is equal to [tex]\frac{15000}{6.022 \times 10^{23}}=\boxed{2.4909 \times 10^{-20} \text{ moles (to 5 sf)}}[/tex]

There are 2.49 × [tex]10^{-20}[/tex] moles present in 15000 atoms of iron (Fe).

A mole is the quantity of a material that includes 6.023 x [tex]10^{23}[/tex] of that substance's components.

The smallest component of ordinary stuff that makes up a chemical element would be an atom.

Calculation of mole

It is known that 1 mole =  6.023 x [tex]10^{23}[/tex] particles.

So, the 1500 atoms will be equal to the = 1500 /  6.023 x [tex]10^{23}[/tex]  =  2.49 × [tex]10^{-20}[/tex] moles .

Therefore, there are 2.49 × [tex]10^{-20}[/tex] moles present in 15000 atoms of iron (Fe).

To know more about mole and atoms

https://brainly.com/question/1566330

#SPJ2

Answer:

1.57

Explanation:

moles = mass / molar mass

moles = 69 / 44.013

moles = 1.57

moles N₂O = 69 : 44 g/mol = 1.568

N₂O : 2 moles N, 1 mole O

moles N = 1.568 x 2 = 3.136

Answer:

Topographic maps generally shows Natural features such as Rivers and Lakes.

sometimes they also show some features made by humans like brodges, elevations etc.

Answer:

Topographic maps show contours, elevation, forest cover, marsh, pipelines, power transmission lines, buildings, and various types of boundary lines such as international, provincial, and administrative, and many others.

please give me brainliest

Answer:

organic chemistry is chemistry focused on structure and composition, extending to recations and properties of compounds.

often centered around compounds with carbon.

alcohols, amines, and aldehydes are some groups that are studied on organic chemistry

SHORT ANSWER:

a) chemistry focused on the structure qnd composition of compounds

b) alcohols, amines, aldehydes

Explanation:

Organic compounds, which are the compounds associated with life processes, are the subject matter of organic chemistry. Among the numerous types of organic compounds, four major categories are found in all living things: carbohydrates, lipids, proteins, and nucleic acids.

Answer:

The moles of H2 is 230-two hundred and thirty

For the reactants,

For the products,

Here, arsenic (+5 to +3) and carbon (+3 to +4) are the only oxidation numbers changing.

Note that an increase in oxidation number means electrons are lost. Thus oxidation is occurring, and a decrease in oxidation number means electrons are being gained, and thus reduction is occurring.

Also, the compound that contains the element being oxidized is the reducing agent, and the compound that contains the element being reduced is the oxidizing agent.

So, the answers are:

name of the element oxidized: Carbon

name of the element reduced: Arsenic

formula of the oxidizing agent: [tex]\text{H}_{3}\text{AsO}_{4}[/tex]

formula of the reducing agent: [tex]\text{H}_{2}\text{C}_{2}\text{O}_{4}[/tex]

It takes 31 s for 1.27 M H₃PO₄ to decrease its concentration to 7.0% of its initial value following first-order kinetics.

First-order kinetics occur when a constant proportion of a reactant disappears per unit time.

Let's consider the following first-order kinetics reaction with a rate constant k = 0.086 s⁻¹.

2 H₃PO₄(aq) = P₂O₅(aq) + 3 H₂O(aq)

Given the initial concentation is [H₃PO₄]₀ = 1.27 M, the concentration representing 7.0% of this value is:

[H₃PO₄] = 7.0% × 1.27 M = 0.089 M

We can calculate the time elapsed (t) using the following expression.

ln ([H₃PO₄]/[H₃PO₄]₀) = - k × t

ln (0.089 M/1.27 M) = - 0.086 s⁻¹ × t

t = 31 s

It takes 31 s for 1.27 M H₃PO₄ to decrease its concentration to 7.0% of its initial value following first-order kinetics.

Learn more about first-order kinetics here: https://brainly.com/question/18916637

#SPJ1

Answer:

I am a small palm-sized pointing device

So mass of sulphur

[tex]\\ \rm\Rrightarrow 0.02\times 757\times 10^{6}[/tex]

[tex]\\ \rm\Rrightarrow 1514\times 10^4[/tex]

Moles =64/32=2

So

So tons of sulphur dioxide

[tex]\\ \rm\Rrightarrow 2(1516)10^4[/tex]

[tex]\\ \rm\Rrightarrow 3032\times 10^4ton[/tex]

Explanation:

2% of 2million tons of sulphur=

2÷100×7.57E9

That is;

[tex] \frac{2}{100} \times 7.57 \times 10 {}^{6} = 0.02 \times 7.57 \times 10 {}^{6} \\ = 2 \times 10 {}^{ - 2} \times7.57 \times 10 {}^{6} = 2 \times 7.57(10 {}^{ - 2 + 6}) \\ = 15.14 \times 10 {}^{4} (for \: sulphur) \\ for \: sulphur \: dioxide = so2 \\ the \: molar \: mass \: of \: so2 = 64g.mol {}^{ -1} \\ if \: 32grams \: of \: sulphur \: weighs \: 15.14 \times 10 {}^{4} tones \\ 64grams \: will \: weigh \: \frac{64}{32} \times 15.14 \times 10 {}^{4} \\ = 2 \times 15.14 \times 10 {}^{4} \\ = 30.28 \times 10 {}^{4} \\ or = 3.028 \times 10 {}^{5} tones[/tex]

This is because fall has more weather patterns which are repetitive than summer.

This is defined as the atmospheric condition of a particular place at a given period of time.

The repetitive weather patterns have various effects on the stars which is why they were studied.

Read more about Weather here https://brainly.com/question/12455866

#SPJ1

Answer:

3Fe + 4H₂O --> Fe3O4 + 4H2

Answer:

nitrogen compounds in the air

Explanation:

Answer:

69.6 g CO₂

Explanation:

To find the mass of carbon dioxide, you need to (1) convert grams LiOH to moles LiOH (via molar mass from periodic table values), then (2) convert moles LiOH to moles CO₂ (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles CO₂ to grams CO₂ (via molar mass). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units (desired unit in the numerator). The final answer should have 3 sig figs to reflect the given value's sig figs.

Molar Mass (LiOH): 6.9410 g/mol + 15.998 g/mol + 1.008 g/mol

Molar Mass (LiOH): 23.947 g/mol

2 LiOH(s) + 1 CO₂(g) ----> Li₂CO₃(s) + H₂O(l)

Molar Mass (CO₂): 12.011 g/mol + 2(15.998 g/mol)

Molar Mass (CO₂): 44.007 g/mol

75.8 g LiOH          1 mole             1 mole CO₂               44.007 g
------------------  x  ----------------  x  -----------------------  x  -------------------  =
                            23.947 g         2 moles LiOH              1 mole

= 69.6 g CO₂

The mass in grams of carbon dioxide that would be required to react with 75.8 g of LiOH is 69.3g

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Mass of LiOH = 75.8g

Moles of LiOH = mass / molar mass

                       = 75.8 / 24 = 3.15 moles

From the reaction,

2 moles of LiOH react with 1 mole of CO₂

1 mole of LiOH needs 0.5 moles of CO₂

thus, 3.15 moles will need 0.5 × 3.15 moles = 1.575 moles of CO₂

Mass of Carbon dioxide = 1.575 × 44

                                       = 69.3g of carbon dioxide

Therefore, the mass in grams of carbon dioxide that would be required to react with 75.8 g of LiOH is 69.3g

Learn more about Moles, here:

https://brainly.com/question/26416088

#SPJ2

Answer:

pH = 4.6  

Explanation:

pH is the negative of the log of the hydrogen ion concentration

- log { 2.52 x 10^-5)   = ~ 4.6

The atomic mass of the unknown element is; 23

We are given that;

Number of protons = 11

Number of Neutrons = 12

Number of Electrons = 11

Now, formula for atomic mass is;

Atomic mass = Number of Neutrons + Number of Electrons

Atomic Mass = 12 + 11

Atomic Mass = 23

Read more about Atomic Mass at; https://brainly.com/question/3187640

#SPJ1