the cable will fail when subjected to a tension of 2 kn. determine the largest vertical load p the frame will support and calculate the normal force, shear force, and moment at point c for this loading. g

If the radius of an electron's orbit around a nucleus doubles but the wavelength remains unchanged, the number of electron wavelengths that can fit in the orbit remains the same.

This is because the wavelength of an electron is related to its momentum and is determined by the size of its orbit. Doubling the radius of the orbit would also double the wavelength, meaning the same number of wavelengths can fit in the larger orbit.

The shortest possible wavelength of the electron in the first Bohr orbit is 5.29 x 10[tex]^-11[/tex]m. This is also known as the Bohr radius and represents the smallest possible size of an atom in which the electron can exist in a stable orbit without emitting radiation.

Learn more about electron's orbit

https://brainly.com/question/19132667

#SPJ4

The amount of time between successive passes of the star Sirius across the meridian is approximately 23 hours, 56 minutes, and 4 seconds. This period is known as a sidereal day.

A meridian is an imaginary line that runs from the North Pole to the South Pole, passing through an observer's zenith, which is the point directly overhead. When a celestial object, like Sirius, crosses this line, it is said to be in transit or at its highest point in the sky.

A sidereal day is the time it takes for Earth to complete one rotation relative to the fixed stars, such as Sirius. This is slightly shorter than a solar day, which is based on Earth's rotation relative to the Sun and lasts approximately 24 hours. The difference between a sidereal and solar day is due to Earth's orbit around the Sun.

As Earth rotates, Sirius will appear to move across the sky and cross the meridian once per sidereal day. Since the sidereal day is about 3 minutes and 56 seconds shorter than a solar day, Sirius will seem to pass the meridian earlier each day when observed at the same local time. This is why the amount of time between successive passes of Sirius across the meridian is approximately 23 hours, 56 minutes, and 4 seconds.

To learn more about Sirius refer to

https://brainly.com/question/31369504

#SPJ11

The capacitance (C) of an oscillating LC circuit can be calculated using the equation C = Q/V, where Q is the maximum charge on the capacitor and V is the maximum voltage across the capacitor. The capacitance of the LC circuit is approximately 0.0091 µF.

In an LC circuit, the total energy (E) is given by the equation E = (1/2) * C * V² = (1/2) * Q²/C, where C is the capacitance and V is the maximum voltage across the capacitor.

Given that the maximum charge on the capacitor is 1.60 µC and the total energy is 140 mJ, we can use the equation for energy to find the capacitance:

E = (1/2) * Q²/C

140 mJ = (1/2) * (1.60 µC)² / C

Solving for C, we get:

C = (1/2) * (1.60 µC)² / (140 mJ) ≈ 0.0091 µF.

To know more about voltage, refer here:

https://brainly.com/question/30764403#

#SPJ11

The phase difference between the two waves arriving at a point 0.56cm from the center line is 0.845 radians.

To determine the phase difference between two waves arriving at a point 0.56cm from the center line in a double-slit experiment, we can use the following formula:

phase difference = (2π/λ) * d * sinθ

Where λ is the wavelength of light, d is the distance between the two slits (also known as slit spacing), θ is the angle between the center line and the point of interest, and 2π is the constant value of a full cycle.

Given the values in the question, we can plug them into the formula:

λ = 490nm = 4.9 x 10⁻⁷ m
d = 0.032mm = 3.2 x 10⁻⁵ m
θ = sin⁻¹ (0.56cm/1.6m) = 0.210 radians

Now we can solve for the phase difference:

phase difference = (2π/4.9 x 10⁻⁷) * 3.2 x 10⁻⁵ * sin(0.210)
phase difference = 0.845 radians

Therefore, the phase difference between the two waves arriving at a point 0.56cm from the center line is 0.845 radians.

To know more about waves, refer

https://brainly.com/question/1968356

#SPJ11

When the ping pong ball is thrown up into the air, two main forces act on it: gravity and air resistance. Gravity is the force that pulls the ball back down towards the ground, while air resistance is the force that opposes the motion of the ball through the air.

These forces will continue to act on the ball until it eventually falls back to the ground.

the forces acting on a ping pong ball thrown into the air. After the ball has left your hand and is traveling through the air, there are two main forces acting on it: gravity and air resistance.

1. Gravity: This is the force that pulls the ping pong ball towards the Earth. It acts downward and is responsible for the ball eventually falling back down.

2. Air resistance: This is the force exerted by air molecules as the ball moves through the atmosphere. It opposes the motion of the ball and acts in the opposite direction of its velocity.

In summary, while the ping pong ball is in the air after being thrown, the forces of gravity and air resistance are acting on it. Gravity pulls the ball downward, while air resistance opposes its motion.

To know more about forces visit:

https://brainly.com/question/13191643

#SPJ11

The sled's mass is 24 kg (since the total mass of the child and sled is 36 kg + 24 kg = 60 kg). The sled's mass is 24 kg. This can be calculated using the conservation of momentum principle, which states that the total momentum of a closed system remains constant if no external forces act on it.

In this case, the initial momentum of the child is 36 kg x 3.0 m/s = 108 kg·m/s. Since the sled is initially at rest, its momentum is 0. After the collision, the combined momentum of the child and sled is (36 kg + m sled) x 2.0 m/s, where m sled is the sled's mass. Using the conservation of momentum principle, we can set these two equations equal to each other and solve for m sled.


The initial momentum of the system is given by the product of the child's mass and velocity:

p initial = m child x v child = 36 kg x 3.0 m/s = 108 kg·m/s

Since the sled is initially at rest, its momentum is 0:

p sled = 0

After the collision, the combined momentum of the child and sled is given by:

p final = (m child + m sled) x v final

where v final is the common velocity of the child and sled after the collision. We are given that v final = 2.0 m/s, so we can substitute that in and solve for m sled:

p initial = p final

36 kg x 3.0 m/s = (36 kg + m sled) x 2.0 m/s

108 kg·m/s = 72 kg·m/s + 2.0 m/s x m sled

36 kg·m/s = 2.0 m/s x m sled

m sled = 36 kg·m/s / 2.0 m/s = 18 kg .

To know more about initial momentum refer to

https://brainly.com/question/12450698

#SPJ11

In a typical automobile engine, the mixture of gasoline and air is compressed from 1.0 atm to 9.5 atm in a cylinder. If the uncompressed volume of the cylinder is 410 mL, the volume in mL when the mixture is fully compressed can be calculated using Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature.

We can use the formula P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume. Substituting the values given in the problem, we get:

1.0 atm x 410 mL = 9.5 atm x V2

Solving for V2, we get:

V2 = (1.0 atm x 410 mL) / 9.5 atm = 44 mL

Therefore, the volume of the mixture when fully compressed is 44 mL. This means that the volume of the gas is significantly reduced when it is compressed at high pressure, which increases the temperature and causes it to combust and power the engine.

you know more about typical automobile engine pls visit-

ttps://brainly.com/question/8371128

#SPJ11

Coherence is important in all forms of wave interference. Each type of interference requires different considerations when it comes to coherence.

Interference is a phenomenon in which two or more waves combine to form a resultant wave of greater, lower, or the same amplitude. It can occur in many forms including constructive interference, in which the amplitudes add together, and destructive interference, in which the amplitudes subtract from each other.

Coherence is important in all forms of wave interference. Each type of interference requires different considerations when it comes to coherence.

Interference:

Interference is the phenomenon where two waves interact with each other and the resultant wave is the sum of the individual waves. Coherence is important in interference because the two waves must be in phase with each other in order for the interference pattern to be created. If the two waves are not in phase, then the interference pattern will not be created. This can be seen in the figure below.

Diffraction:

Diffraction is the phenomenon where a wave passes through an opening or around an obstacle and the wave spreads out after passing through the opening or around the obstacle. Coherence is important in diffraction because the waves must be coherent in order for the diffraction pattern to be created. If the waves are not coherent, then the diffraction pattern will not be created. This can be seen in the figure below.

Refraction:

Refraction is the phenomenon where a wave changes direction when it passes from one medium to another. Coherence is important in refraction because the waves must be coherent in order for the refracted wave to be created. If the waves are not coherent, then the refracted wave will not be created. This can be seen in the figure below

Reflection:

Reflection is the phenomenon where a wave bounces off a surface. Coherence is important in reflection because the waves must be coherent in order for the reflected wave to be created. If the waves are not coherent, then the reflected wave will not be created. This can be seen in the figure below.

To learn more about interference

https://brainly.com/question/2166481

#SPJ4

Answer:

If you were traveling in a spaceship at a velocity close to the speed of light, you would notice several effects of special relativity, including:

Time dilation: Time would appear to be passing more slowly for you compared to someone who is not moving at such a high velocity. This means that while only a few minutes may have passed for you on the spaceship, much more time may have passed for someone on Earth.

Length contraction: Objects in the direction of your motion would appear to be shorter than they actually are. This means that objects that are normally a certain length may appear shorter to you on the spaceship.

Relativistic Doppler effect: Light emitted by objects in the direction of your motion would appear to be shifted towards the blue end of the spectrum, while light emitted by objects behind you would appear shifted towards the red end of the spectrum. This is known as the relativistic Doppler effect.

Increased mass: As you approach the speed of light, your mass would appear to increase. This means that it would take more and more energy to continue accelerating the spaceship.

These effects are all consequences of the special theory of relativity and have been experimentally verified.

Explanation:

The charge of an alpha particle is positive 2. This is because it contains two protons, which have a positive charge of 1 each, and no electrons, which have a negative charge of 1.

Atoms consist of a nucleus, which contains protons and neutrons, and electrons, which orbit around the nucleus. Protons have a positive charge, neutrons have no charge, and electrons have a negative charge.

When an alpha particle is formed, it contains two protons and two neutrons. Since protons have a positive charge and there are no electrons to balance out this charge, the alpha particle has a net positive charge of 2.

An alpha particle consists of two protons and two neutrons. Protons have a positive charge, and neutrons have no charge. Therefore, the total charge of an alpha particle is the sum of the charges of its constituents, which is +1 (charge of a proton) multiplied by 2 (number of protons), resulting in a charge of +2.

To learn more about alpha particle visit:

brainly.com/question/2288334

#SPJ11

Some extreme conditions in space that challenge manned space exploration include extreme temperatures, radiation, microgravity, and the vacuum of space.



1. Extreme temperatures: Space has extreme temperature variations, ranging from -270°C (-454°F) in the cold of shadowed regions to 120°C (248°F) when exposed to direct sunlight. This requires spacecraft and spacesuits to have effective thermal control systems to protect astronauts.

2. Radiation: In space, astronauts are exposed to high levels of radiation from cosmic rays and solar particles. Earth's atmosphere and magnetic field protect us from most of this radiation, but astronauts in space need specialized shielding to avoid the harmful effects of radiation, which can lead to serious health issues such as cancer.

3. Microgravity: In the microgravity environment of space, astronauts experience weightlessness. This can cause muscle atrophy, bone loss, and changes to bodily fluids, which pose long-term health risks. Astronauts must engage in regular exercise and follow strict dietary guidelines to counteract these effects.

4. Vacuum of space: The vacuum of space is a challenging environment for manned space exploration, as it can cause rapid decompression if a spacecraft is compromised. Astronauts must wear pressurized spacesuits and rely on their spacecraft for life support when exposed to the vacuum of space.

In summary, the extreme conditions in space present significant challenges for manned space exploration. Effective engineering solutions, protective measures, and ongoing research are necessary to ensure the safety and well-being of astronauts in these harsh environments.

To know more about radiation visit:

brainly.com/question/13934832

#SPJ11

The I-V (current-voltage) relationship may not be the same when the voltage is increasing and when it is decreasing.

This could be due to hysteresis in the system, which means that the response of the system depends not only on the current input but also on the history of the input. The curves may not be the same because of hysteresis or other non-linear effects in the system.

To detect the voltage at which the motor stops moving, you would need to measure the current and voltage while gradually increasing or decreasing the voltage. The point at which the current drops to zero would indicate the voltage at which the motor stops moving. It is not possible to mark this point on the I-V curve without actually conducting the experiment and measuring the data.

To know more about I-V (current-voltage) relationship,

https://brainly.com/question/15721188

#SPJ11

(a)  It would take 8.4 kJ of energy to raise the temperature of 1 kg of water by 2 degrees Celsius.

(b) It would take 12.6 kJ of energy to raise the temperature of 3 kg of water by 1 degree Celsius.

To raise the temperature of 1 kg of water by 2 degrees Celsius, the amount of energy required is calculated as

E = 2 x 4200 J

E = 8400 J

E = 8400 J / 1000 = 8.4 kJ

(b) To raise the temperature of 3 kg of water by 1 degree Celsius, the amount of energy required is calculated as;

E = 1 x 4200 J x 3 kg

E = 12600 J

E = 12600 J / 1000

E = 12.6 kJ

Learn more about heat energy here: https://brainly.com/question/7541718

#SPJ1

The speed of the tip of the rod as it passes the horizontal position is approximately 1.98 m/s.

To arrive at this solution, we can use conservation of energy. When the rod is released from rest, it has only potential energy, which is given by mgh, where m is the mass of the rod, g is the acceleration due to gravity, and h is the height of the center of mass above the horizontal. At the horizontal position, all of the potential energy has been converted into kinetic energy, which is given by (1/2)mv^2, where v is the velocity of the tip of the rod.

Using trigonometry, we can find that the height of the center of mass above the horizontal is (2/3)sin(θ/2), where θ is the initial angle with respect to the horizontal. Plugging in the values, we get h = (2/3)sin(15°) ≈ 0.205 m.

Setting the potential energy equal to the kinetic energy and solving for v, we get:

mgh = (1/2)mv^2

Simplifying and solving for v, we get:

v = sqrt(2gh)

Plugging in the values, we get:

v = sqrt(2 x 9.81 x 0.205) ≈ 1.98 m/s

Therefore, the speed of the tip of the rod as it passes the horizontal position is approximately 1.98 m/s.

To know more about speed, visit:

https://brainly.com/question/28224010

#SPJ11

A bar magnet is a type of magnet shaped like a bar that has two poles, a north pole and a south pole. These poles are responsible for the magnet's ability to attract and repel other magnets.

The poles of the magnet are located at opposite ends and can be identified by their magnetic properties. The north pole is attracted to the south pole of another magnet, while the south pole is attracted to the north pole of another magnet.

The number of poles a bar magnet can have depends on the number of domains within the magnet. A domain is a region of a magnet where all of the atomic dipoles are aligned in the same direction.

If the magnet has a single domain, then it will only have two poles, a north and a south. However, if the magnet has multiple domains, then the number of poles it has can be greater than two. For example, a cube-shaped magnet with multiple domains may have four poles, such as a north, south, east, and west pole.

The strength of a bar magnet also depends on the number of poles it has. Generally, the more poles a bar magnet has, the stronger it is. This is because the more poles a bar magnet has, the greater the surface area of the magnet and the larger the magnetic field it can create.

Know more about Atomic dipoles  here

https://brainly.com/question/30434295#

#SPJ11

The shift in the physical description of the landlady can reveal a lot about her character and the tone of the story.

For example, if at first she is described as warm and welcoming, but then her appearance becomes more sinister or mysterious, it can create a sense of unease or foreboding for the reader. Alternatively, if the initial description is negative but then changes to be more positive, it can indicate a change in the character's attitude or actions towards the protagonist.

The physical description of the landlady is an important tool for establishing mood and character development in a story, and can greatly affect the reader's perception of the narrative.

To know more about landlady visit

https://brainly.com/question/30344531

#SPJ11

Answer:Slower

Explanation:

First things first, let's talk about what sound is. Sound is a type of energy that travels through air, water, and other materials in waves. These waves cause changes in pressure, which we hear as sound.

Now, let's get to the heart of the matter – would the sound produced by the Finse ice orchestra reach the audience faster or slower than the same sound produced by an orchestra in a warm auditorium? The answer is that it would reach the audience faster in the warm auditorium.

This is because the speed of sound depends on the temperature and density of the medium it's traveling through. In general, sound travels faster in warmer materials and slower in cooler materials. In an auditorium, the air is warm and less dense, which means that sound can travel faster through it. On the other hand, in an icy environment like the Finse ice orchestra, the air is colder and denser, which slows down the speed of sound.

So, in summary, the sound produced by the Finse ice orchestra would reach the audience slower than the same sound produced by an orchestra in a warm auditorium

Newton's Law of Gravitation states that every particle in the universe attracts every other particle with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.

This force is known as gravity. This law explains why objects with large masses such as planets and stars have a strong gravitational pull, while objects with small masses such as rocks and dust have a weaker gravitational pull. This law also explains why objects fall toward the Earth when they are dropped, and why the Moon orbits around the Earth.

By understanding Newton's Law of Gravitation, scientists can better predict the motion and behavior of objects in the universe.

Know more about Newton's Law of Gravitation here

https://brainly.com/question/9373839#

#SPJ11

The energy stored in a 7.09 × 10^-7 H inductor that carries a 1.50-A current is 1.09 × 10^-7 J.

The energy stored in an inductor can be calculated using the formula:
E = 1/2 * L * I^2 where E is the energy stored in the inductor, L is the inductance, and I is the current flowing through the inductor. Substituting the given values into the formula, we get:E = 1/2 * (7.09 × 10^-7 H) * (1.50 A)^2 = 1.09 × 10^-7 J. Therefore, the energy stored in the inductor is 1.09 × 10^-7 J. Hence, the correct option is (C).

To know more about current, click here https://brainly.com/question/23323183

#SPJ11

To solve this problem, we need to use the thin lens equation: 1/f = 1/do + 1/di, where f is the focal length of the lens, do is the object distance, and di is the image distance.

Plugging in the given values, we get:

1/30 = 1/60 + 1/di

Simplifying the equation, we get:

1/di = 1/30 - 1/60

1/di = 1/60

di = 60 cm

This means that the image is formed 60 cm away from the lens. To determine the nature of the image, we can use the magnification equation: m = -di/do, where m is the magnification of the image.

Plugging in the given values, we get:

m = -60/60
m = -1

The negative sign indicates that the image is inverted. Therefore, the nature of the image is real, inverted, and the same size as the object.

The location of the image is 60 cm away from the lens on the opposite side as the object.

In summary, the 4.0-cm tall object placed 60 cm away from a converging lens of focal length 30 cm forms a real,

inverted image that is the same size as the object and located 60 cm away from the lens on the opposite side as the object.

To know more about 1/f = 1/do + 1/direfer here

https://brainly.com/question/10722312#

#SPJ11

The equation for conservation of energy with friction is PEi + KEi + Wfriction = PEf + KEf.

Friction is a force that resists the relative motion of two surfaces that are in contact with each other. It is a force that works to oppose motion between two surfaces and is created when two objects rub against each other. Friction is the result of two surfaces interacting and the electrons of each surface reacting with the other. The rougher the surfaces, the more friction is generated. Friction can cause objects to heat up, slow down, or even stop.

The equation for conservation of energy states that the total energy of a system must remain constant. Friction is a form of energy, so it must be taken into account in the equation. In this case, the equation is modified to include the work done by friction (Wfriction) on the system. Thus, the equation for conservation of energy with friction is PEi + KEi + Wfriction = PEf + KEf.

To learn more about friction
https://brainly.com/question/24386803
#SPJ4

According to the question the pathologist can get a magnification of 2.09 from the lens.

Pathologists are medical doctors who specialize in diagnosing and determining the cause of diseases and medical conditions. They are often referred to as diagnostic physicians. Pathologists analyze samples of blood, urine, tissue, and other body fluids to look for abnormal cells or to identify bacteria, viruses, and other microorganisms that may be causing an illness.

The amount of magnification provided by a lens is determined by dividing the focal length of the lens (f) by the distance between the lens and the object (d):
M = f / d
In this case, we have a focal length of 4.50 cm and a distance of 2.17 cm, so:
M = 4.50 cm / 2.17 cm
M = 2.09
Therefore, the pathologist can get a magnification of 2.09 from the lens.

To learn more about magnification

https://brainly.com/question/15744335

#SPJ4

When the knob is rotated clockwise (cw), the channel 1 voltage increases while the channel 2 voltage decreases. This is because the knob controls the voltage divider network, which divides the input voltage between the two channels. As the knob is rotated clockwise, the resistance in the network decreases, allowing more of the input voltage to flow to channel 1 and less to channel 2.

Conversely, when the knob is rotated counterclockwise (ccw), the channel 1 voltage decreases while the channel 2 voltage increases. This is because the resistance in the voltage divider network increases, causing more of the input voltage to flow to channel 2 and less to channel 1.

It is important to note that the relationship between the channel 1 and channel 2 voltages is inversely proportional. This means that as one voltage increases, the other decreases, and vice versa. Additionally, the exact values of the voltages will depend on the input voltage and the resistance values in the voltage divider network.

Overall, understanding how the channel voltages change as the knob is rotated is essential for accurately measuring and analyzing signals in electronic circuits.

To know more about voltages, refer

https://brainly.com/question/27861305

#SPJ11

The approximate power developed by the synchronous motor is 2293.14 hp.

To calculate the approximate power developed by the motor in horsepower (hp), we will follow these steps:

1. Find the real power (kW) using the formula: Real Power (kW) = Apparent Power (kVA) × Power Factor.
2. Convert the real power (kW) to mechanical power (kW) using the efficiency: Mechanical Power (kW) = Real Power (kW) × Efficiency.
3. Convert the mechanical power (kW) to horsepower (hp) using the conversion factor: 1 kW = 1.34102 hp.

Using the given information:
- Apparent Power = 2000 kVA
- Power Factor = 90% leading = 0.9
- Efficiency = 95% = 0.95

1. Real Power (kW) = 2000 kVA × 0.9 = 1800 kW
2. Mechanical Power (kW) = 1800 kW × 0.95 = 1710 kW
3. Approximate Power Developed (hp) = 1710 kW × 1.34102 = 2293.14 hp

In conclusion, the approximate power developed by the motor is 2293.14 hp.

To know more about synchronous motor, visit:

https://brainly.com/question/31605298

#SPJ11

To determine the force needed to prevent the plate from moving horizontally due to the water stream, we need to use the principle of conservation of momentum. The momentum of the water stream before the strike is equal to the momentum of the water stream and plate after the strike.

The momentum of the water stream before the strike is given by:

P = m * v
where m is the mass flow rate of the water stream (10 kg/s) and v is the average speed of the water stream (20 m/s).
P = 10 kg/s * 20 m/s = 200 kg m/s

After the strike, the water stream splatters off in all directions in the plane of the plate. We can assume that the water stream and plate move together with the same final velocity v_f.

Therefore, the momentum of the water stream and plate after the strike is given by:

P_f = (m + M) * v_f
where M is the mass of the plate and v_f is the final velocity of the water stream and plate after the strike.

Since the plate is stationary before the strike, its initial momentum is zero. Thus, the conservation of momentum principle can be written as:

P = P_f
or
m * v = (m + M) * v_f

Solving for v_f, we get:

v_f = (m * v) / (m + M)

Substituting the given values, we get:

v_f = (10 kg/s * 20 m/s) / (10 kg/s + M)

Now, the force needed to prevent the plate from moving horizontally due to the water stream is equal to the change in momentum of the water stream and plate, divided by the time it takes for the water stream to hit the plate.

Assuming that the time it takes for the water stream to hit the plate is negligible, the force needed can be calculated as:

F = (m + M) * (v_f - 0) / t
where t is the time it takes for the water stream to hit the plate.

Since we don't know the value of t, we cannot calculate the force directly. However, we can make some assumptions about the time it takes for the water stream to hit the plate.

If we assume that the water stream hits the plate instantaneously (i.e., t = 0), then the force needed is infinite. This is because the change in momentum is instantaneous and the force required to stop the plate from moving horizontally in this scenario would be infinite.

If we assume that the water stream hits the plate over a very short period of time (i.e., t is very small), then the force needed would be very large but not infinite. This is because the change in momentum is still large, but it is spread out over a short period of time, reducing the magnitude of the force required.

In summary, we cannot determine the force needed to prevent the plate from moving horizontally due to the water stream without knowing the exact value of t. However, we can make some assumptions about the time it takes for the water stream to hit the plate and infer that the force needed would be very large, if not infinite, to prevent the plate from moving horizontally.
To determine the force needed to prevent the plate from moving horizontally due to the water stream, we'll apply the conservation of linear momentum principle. The momentum before the impact is equal to the momentum after the impact.

1. Calculate the initial momentum of the water stream:
Initial momentum = mass flow rate x initial velocity
Initial momentum = 10 kg/s x 20 m/s = 200 kg m/s (in the horizontal direction)

2. Determine the final momentum of the water stream:
Since the water splatters off in all directions in the plane of the plate, the net horizontal momentum after the impact is zero.

3. Apply the conservation of linear momentum principle:
Initial momentum = Force x time
Since the final momentum is zero, we can write:
200 kg m/s = Force x time

4. Calculate the force:
The force required to stop the horizontal motion of the plate can be found by rearranging the equation above. However, we need more information about the time involved in this process to calculate the force. If you can provide the duration of the impact, we can determine the force needed to prevent the plate from moving horizontally due to the water stream.

To know more about momentum visit:

brainly.com/question/30677308

#SPJ11

The average voltage induced in the coil is 6.25 V.

The voltage induced in a coil is given by the formula V = NAB/t, where N is the number of turns of wire, A is the area of the coil, B is the magnetic field strength, and t is the time interval over which the field changes. In this case, N = 2 500, A = (2.0 cm)^2 = 4.0 cm^2 = 4.0 x 10^-4 m^2, B = 0.25 T, and t = 1.0 s.

Substituting these values into the formula gives V = (2 500)(4.0 x 10^-4)(0.25)/1.0 = 6.25 V.

The average voltage induced in the square coil, with sides 2.0 cm long and wrapped with 2 500 turns of wire, by a uniform magnetic field perpendicular to its plane that increases to 0.25 T during an interval of 1.0 s, is 6.25 V.

To know more about voltage, visit;

https://brainly.com/question/1176850

#SPJ11

The momentum of ball when it strikes the ground is c)1.5 kg-m/s.

To calculate the momentum when the ball strikes the ground, we first need to find its final velocity. We can use the following equation to do that:
v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity (0 m/s, since the ball is dropped), a is the acceleration due to gravity (approximately 9.81 m/s^2), and s is the height (12 m).

v^2 = 0^2 + 2(9.81)(12)
v^2 = 235.44
v = √235.44
v ≈ 15.34 m/s

Now, we can calculate the momentum (p) using the equation:
p = mv
where m is the mass of the ball (0.1 kg, since 100 g = 0.1 kg) and v is the final velocity (15.34 m/s).
p = (0.1 kg)(15.34 m/s)
p ≈ 1.534 kg.m/s

To know more about momentum, please click on:

https://brainly.com/question/30677308

#SPJ11

According to the question, the speed of the dart as it leaves the blow gun is about: 60 m/s.

Speed is defined as the rate at which something moves or operates. It is measured in units such as meters per second (m/s), kilometers per hour (km/h) or miles per hour (mph). In physics, speed is the magnitude of velocity, which is the rate of change of position. It is a scalar quantity, meaning it is a magnitude without direction. Speed is used to measure how quickly an object is moving, and is often confused with velocity, which is a vector quantity that has both magnitude and direction.

The speed of the dart can be calculated using the equation v = F × t/m, where F is the force applied, t is the time the force was applied for, and m is the mass of the dart.

Plugging in the given values, we get: v = (2.0 N) × (0.75 s) / (0.05 kg)

v = 60 m/s

Therefore, the speed of the dart as it leaves the blow gun is about 60 m/s.

To learn more about speed

https://brainly.com/question/24739297

#SPJ4

2A  is the current (in amps) through the hole

Define electric current

An electric current is the movement of charged particles through a conductor or a vacuum, such as electrons or ions. It is referred to be the overall pace at which electric charge moves through a surface.

Electric current describes both how much electricity is going through a circuit and how it is flowing in an electronic circuit. It is expressed in amps (A). More electricity is flowing in the circuit when the amperage value is higher.

Charge, also known as electric charge, electrical charge, or electrostatic charge, is a property of a unit of matter that expresses how many more or fewer electrons than protons it possesses. It is denoted by the sign q.

I ⇒ dQ/dt

Q⇒12C

t ⇒ 6sec

I ⇒ 12/6 ⇒2A

To learn more about electric charge use:

https://brainly.com/question/26100412

#SPJ4

The current flowing through the hole is 2 amps. It's important to note that electric current is the rate of flow of charge, so the amount of charge passing through a point in a circuit per unit of time determines the current.

The flow of electric charge through a circuit is known as electric current. The standard unit for measuring an electric current is the ampere (A), which is defined as the flow of one coulomb of charge per second. In this problem, we are given that a collection of molecules with a charge of 12 coulombs passes through a hole in 6 seconds.

To calculate the current (in amps) through the hole, we need to use the formula:

Current = Charge / Time

In this case, the charge is 12 coulombs and the time is 6 seconds, so we can plug in the values:

Current = 12 coulombs / 6 seconds = 2 amps

This calculation demonstrates how the amount of charge and time taken for that charge to pass through a point in a circuit can be used to calculate the current.

To learn more about electric current

https://brainly.com/question/12791045

#SPJ4

To measure the absorbance of pigments extracted from spirulina and spinach, you should set the spectrometer to a wavelength of around 400-700 nanometers, which is the visible light range.

This is because the pigments in these plants, such as chlorophyll and carotenoids, absorb light in this range. By using a spectrometer to measure the absorbance of these pigments at different wavelengths, you can determine the specific wavelengths at which they absorb the most light and therefore their specific colors.
To measure the absorbance of pigments extracted from spirulina and spinach, you should set the spectrometer to wavelengths in the visible light range (approximately 400-700 nm). Specifically, focus on the wavelengths of chlorophyll pigments: chlorophyll a (peak absorbance around 430 nm and 662 nm) and chlorophyll b (peak absorbance around 453 nm and 642 nm).

To know more about wavelength visit:

https://brainly.com/question/31143857

#SPJ11