The decay energy of a short-lived particle has an uncertainty of 1. 0 mev due to its short lifetime. What is the smallest lifetime it can have?.

In many states, permit holders who are older than 21 years old are required to have a certain amount of supervised driving practice before they can take their road test. This practice is designed to help ensure that the driver has enough experience behind the wheel to operate a vehicle safely and competently.

The amount of supervised driving required may vary from state to state, but in general, it is recommended that new drivers have at least 50 hours of supervised driving practice before taking the road test. This may include a mix of daytime and nighttime driving, as well as driving on different types of roads and in different weather conditions.

During the supervised driving period, the new driver is expected to learn the rules of the road, develop good driving habits, and become comfortable and confident behind the wheel. With enough practice and experience, the driver will be better equipped to handle the challenges and hazards of driving on their own.

To know more about permit holders click here:

https://brainly.com/question/4503586

#SPJ11

The car is moving speed of approximately 5.12 m/s towards the pedestrian.

1. Given information: The source frequency (frequency produced by the car's horn) is [tex]f_s[/tex] = 381 Hz, and the frequency heard by the pedestrian is [tex]f_o[/tex] = 388 Hz. We will also use the speed of sound in air, which is approximately [tex]v_{sound}[/tex] = 343 m/s.
2. To find the speed of the car ([tex]v_{car}[/tex]), we will use the Doppler effect formula:
[tex]f_o[/tex] = [tex]f_s[/tex] * ([tex]v_{sound}[/tex] + [tex]v_o[/tex]) / ([tex]v_{sound}[/tex] - [tex]v_s[/tex])
where [tex]f_o[/tex] is the observed frequency, [tex]f_s[/tex] is the source frequency, [tex]v_o[/tex] is the speed of the observer (0 in this case, as the pedestrian is stationary), [tex]v_s[/tex] is the speed of the source (car), and [tex]v_{sound}[/tex] is the speed of sound in air.
3. Plug in the given values and solve for [tex]v_s[/tex]:
[tex]388 Hz = 381 Hz * \frac{ (343 m/s) }{ (343 m/s -v_{sound} )}[/tex]
4. To isolate [tex]v_s[/tex], first, divide both sides by 381 Hz:
1.0184 = (343 m/s) / (343 m/s - [tex]v_s[/tex])
5. Next, multiply both sides by (343 m/s - [tex]v_s[/tex]):
[tex]1.0184= \frac{ (343 m/s) }{ (343 m/s -v_{sound} )}[/tex]
6. Distribute 1.0184 to both terms in the parentheses:
349.29 m/s - 1.0184 *[tex]v_s[/tex] = 343 m/s
7. Now, move the[tex]v_s[/tex] term to the right side and subtract 343 m/s from both sides:
1.0184 * [tex]v_s[/tex] = 6.29 m/s
8. Finally, divide both sides by 1.0184 to find the speed of the car:
[tex]v_s[/tex] = 6.29 m/s / 1.0184 ≈ 5.12 m/s
The car is moving at approximately 5.12 m/s towards the pedestrian.

For more information on Doppler effect kindly visit to

https://brainly.com/question/28106478

#SPJ11

The magnitude of the magnetic flux through the loop is 0.098 Wb.The magnetic flux through a loop is given by the product of the magnetic field strength, the area of the loop, and the cosine of the angle between the magnetic field and the normal to the loop, the magnetic flux through the loop is zero.

However, if we assume that the magnetic field is directed perpendicular to the plane of the loop and passes through the center of the loop, the magnitude of the magnetic flux through the loop is given by the product of the magnetic field strength and the area of the loop, or: Magnetic flux = magnetic field strength x area of loop = (0.60 T) x (π x 0.40 m^2) = 0.098 Wb. Therefore, the correct answer is option B) 0.098 Wb.

To learn more about magnetic field:

https://brainly.com/question/14848188

#SPJ11

According to the question the mass of air in the room at 100kPa and 25°C is 0.119 g.

Mass is a measure of the amount of matter an object contains. It is usually measured in kilograms or grams. Mass is distinct from weight, which is the measure of the force of gravity on an object. Mass is an intrinsic property of matter and remains unchanged regardless of its location or environment. Mass is an important factor in Newton's law of universal gravitation which states that gravity is proportional to the product of the two masses.

n = (100kPa)(125m³) / (8.314J/mol-K)(298K)
n = 0.0041 moles
Now, we can calculate the mass of air in the room. The mass of air is equal to the number of moles multiplied by the molar mass of air, which is 28.97 g/mol. Plugging in the value of n, we get:
Mass of air = (0.0041 moles)(28.97 g/mol)
Mass of air = 0.119 g
Therefore, the mass of air in the room at 100kPa and 25°C is 0.119 g.

To learn more about mass
https://brainly.com/question/86444
#SPJ4

The difference in blood pressures between the normal and constricted segments of the artery is approximately 139.4 Pa.

To find the difference in blood pressures between the normal and constricted segments of the artery, we can use the Bernoulli's equation, which relates the pressure, velocity, and height of fluid flow in a system:

P1 + 0.5 * ρ * v1² = P2 + 0.5 * ρ * v2²

Here, P1 and P2 are the pressures in the normal and constricted segments, v1 and v2 are the blood speeds in these segments, and ρ is the density of blood (1060 kg/m³). Since the artery is horizontal, there is no height difference to consider.

Given that the constricted segment's cross-sectional area is one-fifth of the normal segment, and according to the principle of continuity (A1 * v1 = A2 * v2), we can find the blood speed in the constricted segment (v2):

A1 / A2 = v2 / v1

Since A2 = A1 / 5:

v2 = 5 * v1 = 5 * 0.13 m/s = 0.65 m/s

Now, we can find the difference in blood pressures (ΔP = P2 - P1):

P1 + 0.5 * ρ * v1² = P2 + 0.5 * ρ * v2²
ΔP = P2 - P1 = 0.5 * ρ * (v2² - v1²)

Substitute the known values:

ΔP = 0.5 * 1060 kg/m³ * (0.65 m/s² - 0.13 m/s²)
ΔP ≈ 139.4 Pa

The difference in blood pressures between the normal and constricted segments of the artery is approximately 139.4 Pa.

To learn more about blood, refer below:

https://brainly.com/question/26557101

#SPJ11

The oxidation of iron (Fe) is occurring at the anode and the reduction of copper (Cu) is occurring at the cathode, resulting in a net voltage of 0.972 V. therefore D is true.

Electrical energy is a form of energy that is generated through the use of electrical current. It is created when electrons move through a conductor, such as a metal wire, producing a voltage that can be used to power devices such as lights, appliances, and motors. Electrical energy can be generated from various sources, such as burning fossil fuels, nuclear energy, or through the use of solar panels and wind turbines. It is then transmitted to homes and businesses through power lines, and can be stored in batteries. Electrical energy is used for a variety of applications, from powering lights and computers to running factories and transportation systems.

To learn more about electrical energy
https://brainly.com/question/29395271
#SPJ4

Complete Question:
Consider the following voltaic cell for: fe (s) | fe2 (1 m) || cu2 (1 m) | cu (s) where the voltage is 0.972 v. which of the following statements is true?

According to the question the potential at the center of the sphere is 0 V.

A conductor is a material or object that allows the flow of electricity or heat. It is typically made of metal, such as copper or aluminum, and is used to connect different parts of an electrical circuit. In electronics, conductors are used to carry signals from one part of the circuit to another. In electrical engineering, conductors are often used to create electrical systems and components. In thermodynamics, conductors are used to transfer heat energy.

The potential at the center of the sphere is 0 V because the sphere is a conductor and any electric field inside the sphere is zero. This is due to the fact that electric fields inside a conductor are zero because the charges move around until the electric field inside is zero. Therefore, the option answer is D. 0 V.

To learn more about conductor
https://brainly.com/question/30759857
#SPJ4

One difference between a total solar and a total lunar eclipse is that a total solar eclipse occurs when the Moon passes between the Sun and Earth, blocking the Sun's light and casting a shadow on Earth, whereas a total lunar eclipse occurs when the Earth passes between the Sun and the Moon, and the Earth's shadow falls on the Moon.

In other words, a total solar eclipse is visible from a narrow path on the Earth's surface, while a total lunar eclipse is visible from anywhere on the night side of the Earth. Additionally, during a total solar eclipse, the Moon appears to completely cover the Sun, while during a total lunar eclipse, the Moon appears to be reddish-brown due to the Earth's atmosphere bending and filtering sunlight towards the Moon.

A total solar eclipse occurs when the moon passes between the sun and Earth, completely blocking out the sun's light and casting a shadow on the Earth's surface. In contrast, a total lunar eclipse occurs when the Earth passes between the sun and the moon, causing the Earth's shadow to fall on the moon and darken it. In other words, during a total solar eclipse, the moon blocks the sun's light from reaching the Earth, while during a total lunar eclipse, the Earth blocks the sun's light from reaching the moon.

To know more about eclipse,

https://brainly.com/question/4279342

#SPJ11

When warm air cools and the temperature drops to the dew point, condensation will likely occur. This happens because the air is saturated with water vapor and can no longer hold the moisture when it reaches the dew point.

Temperature is the measure of hot or cold in an environment. It is measured in units of Celsius, Fahrenheit and Kelvin. Temperature is a measure of the average kinetic energy of molecules in a substance. The higher the temperature, the faster the molecules in the substance move. Temperature is important in many aspects of life, such as cooking, industry and recreation. Temperature affects the rate of chemical reactions, which can affect the growth and health of living beings. Temperature can also affect the environment, such as increasing the growth of certain plants and animals or melting ice caps. Temperature is a key factor in weather patterns and climate change.

The water vapor then condenses into liquid water droplets, forming dew, fog, or clouds.

To learn more about temperature
https://brainly.com/question/27944554
#SPJ4

The enthalpy change for the reaction when 1 mole of FeCl₂(s) is 433.6 kJ/mol.

Reaction is the process of responding to a stimulus or action. It is an immediate response that is often instinctive and largely involuntary. Reaction is a natural process that helps us to adapt to our environment and survive. It can be physical, such as a reflex action, or emotional, such as feeling happy or sad.

The enthalpy change for a reaction is calculated by dividing the total amount of heat produced by the number of moles of product produced. In this case, 8.60 kJ of heat was produced when 1.42 g of iron reacted with 1.80 g of chlorine, yielding 3.22 g of FeCl₂(s). To calculate the enthalpy change per mole, we must convert the mass of FeCl₂(s) to moles. We can do this by taking the mass of FeCl₂(s) and dividing it by the molar mass of FeCl₂(s), which is 162.20 g/mol.

(3.22 g FeCl₂(s)) / (162.20 g/mol FeCl₂(s)) = 0.0198 mol FeCl₂(s)
We can now calculate the enthalpy change for the reaction when 1 mole of FeCl₂(s) is produced.
Enthalpy change = (8.60 kJ of heat) / (0.0198 mol FeCl₂(s)) = 433.6 kJ/mol.

To learn more about reaction
https://brainly.com/question/2051941
#SPJ4

F_new = (1/4) * F, which means the magnitude of the new force exerted by the positive point charge on the negative point charge is one-fourth the magnitude of the original force, or F/4.

To solve this problem, we need to understand the relationship between the force exerted by point charges and the distance between them, which is described by Coulomb's Law.

Coulomb's Law states that the magnitude of the electrostatic force (F) between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance (x) between them: F ∝ (q1 * q2) / x^2.

In this case, we have a positive point charge exerting a force of magnitude F on a negative point charge at a distance x. If the distance between the two charges is halved, the new distance is (1/2) * x.

We want to determine the magnitude of the new force exerted by the positive point charge on the negative point charge.

By applying Coulomb's Law, we can compare the initial and new situations:

Initial force: F = k * (q1 * q2) / x^2
New force: F_new = k * (q1 * q2) / [(1/2) * x]^2

To find the relationship between F and F_new, divide the equation for F_new by the equation for F:

F_new / F = [(1/2) * x]^2 / x^2

Simplifying the equation, we get:

F_new / F = (1/4)

To learn more about : point charge

https://brainly.com/question/27990053

#SPJ11

When an astronomer says that a star moves from one place to another on an H-R diagram, it means that the star is undergoing a change in its characteristics. An H-R diagram, also known as a Hertzsprung-Russell diagram, is a tool used by astronomers to study stars based on their luminosity and temperature.

The diagram plots stars' absolute magnitude, or brightness, against their spectral type, which is determined by the star's temperature.
As a star undergoes changes in its luminosity and temperature, it moves along the H-R diagram. For example, when a star exhausts the hydrogen fuel in its core and begins to fuse helium, it will become brighter and hotter, causing it to move up and to the left on the H-R diagram. This change is known as the star's evolution, and it can provide insight into the star's lifespan and eventual fate.
In summary, when an astronomer says that a star moves from one place to another on an H-R diagram, they are referring to the star's evolution and how its characteristics are changing over time.

To know more about astronomer visit :

https://brainly.com/question/14853303

#SPJ11

To calculate the heat required to convert ice to steam, we must first determine the amount of heat required to raise the temperature of the ice from -12.0 oC to 0 oC, then the heat required to melt the ice at 0 oC, then the heat required to raise the temperature of the resulting water from 0 oC to 100 oC, then the heat required to boil the water at 100 oC, and finally, the heat required to raise the temperature of the resulting steam from 100 oC to 120 oC.

The heat required to raise the temperature of 15.0 g of ice from -12.0 oC to 0 oC is given by:

q1 = mCΔT

q1 = 15.0 g × 2.06 J/g.oC × (0 - (-12.0))

q1 = 3,108 J

The heat required to melt 15.0 g of ice at 0 oC is given by:

q2 = mΔHf

q2 = 15.0 g × 333.5 J/g

q2 = 5,003 J

The heat required to raise the temperature of 15.0 g of water from 0 oC to 100 oC is given by:

q3 = mCΔT

q3 = 15.0 g × 4.18 J/g.oC × (100 - 0)

q3 = 6,270 J

The heat required to boil 15.0 g of water at 100 oC is given by:

q4 = mΔHv

q4 = 15.0 g × 2257 J/g

q4 = 33,855 J

The heat required to raise the temperature of the resulting steam from 100 oC to 120 oC is given by:

q5 = mCΔT

q5 = 15.0 g × 1.84 J/g.oC × (120 - 100)

q5 = 5,520 J

The total heat required is the sum of q1, q2, q3, q4, and q5:

q = q1 + q2 + q3 + q4 + q5

q = 3,108 J + 5,003 J + 6,270 J + 33,855 J + 5,520 J

q = 53,756 J

Converting J to kJ:

q = 53,756 J ÷ 1000

q = 53.8 kJ

Therefore, the heat required to convert 15.0 g of ice at -12.0 oC to steam at 120.0 oC is 53.8 kJ.

TO KNOW MORE ABOUT heat in kilojoules  CLICK THIS LINK -

brainly.com/question/359611

#SPJ11

The efficiency of the ideal Carnot-engine is 0.68, which is closest to option B (0.62).

The Carnot heat engine is a theoretical engine that operates between two temperature reservoirs, one hot and one cold, and is considered to be the most efficient engine possible. The efficiency of a Carnot engine is determined solely by the temperatures of the two reservoirs and is given by the equation:
Efficiency = 1 - (T_cold/T_hot)
where T_cold is the temperature of the cold reservoir and T_hot is the temperature of the hot reservoir. The efficiency is a ratio of the work output of the engine to the heat input.
In this question, the engine is operating between two temperatures, and we are asked to calculate its efficiency. We need to calculate the ratio of the work output of the engine to the heat input. Since the engine is ideal, it is assumed to have no energy losses. The temperatures of the hot and cold reservoirs are given, and we can use the equation for the efficiency of a Carnot engine to calculate the efficiency.
The efficiency of an ideal Carnot engine is given by the formula:
efficiency = 1 - (Tc/Th)
where Tc is the temperature of the cold reservoir and Th is the temperature of the hot reservoir.
Substituting the given values, we get:
efficiency = 1 - (273/873) = 0.68
Therefore, the efficiency of the ideal Carnot-engine is 0.68, which is closest to option B (0.62).

To learn more about Carnot-engine, click here:
https://brainly.com/question/31430273

#SPJ11

Therefore, the period of the tuning fork that holds the clay is either: 1.69 ms and 1.72 ms.

The beat frequency is the difference between the frequencies of the two tuning forks, which is 8 Hz in this case. Since the frequency of the two tuning forks before adding clay is the same (587 Hz), the frequency of the fork with the clay must be either 587 + 4 = 591 Hz or 587 - 4 = 583 Hz. We don't know which tuning fork has the clay, so we have to check both possibilities.

The period (T) of a vibrating object is the time it takes to complete one cycle of vibration. It is related to the frequency (f) by the equation T = 1/f. Therefore, we can find the period of the tuning fork that holds the clay by calculating its frequency first.

If the fork with the clay has a frequency of 591 Hz, then its period would be T = 1/591 s. If the fork with the clay has a frequency of 583 Hz, then its period would be T = 1/583 s.

T = 1/591 s ≈ 1.69 ms

or

T = 1/583 s ≈ 1.72 ms

To know more about tuning fork,

https://brainly.com/question/11811308

#SPJ11

If you stand closer to a concave mirror than a distance of one focal length, the image you see is virtual, upright, and magnified. However, the image will also be distorted and blurry.

As you move closer to the mirror, the magnification will increase, but the image will become even more distorted. It is important to note that the image will not be real, meaning it cannot be projected onto a screen or captured by a camera.

If you stand closer to a concave mirror than a distance of one focal length, the image you see is virtual, upright, and magnified. This is because when the object is located within the focal length of a concave mirror, the image formed will have these properties.

To know more about concave visit:

https://brainly.com/question/13320130

#SPJ11

To find the speed with which a wave travels on a piano string under a certain tension and with a specific mass per unit length,

we can use the formula v = sqrt(T/μ), where T is the tension in newtons and μ is the mass per unit length in kilograms per meter.

Plugging in the given values, we get:

v = sqrt(1200 N / 4.70 x 10^-3 kg/m)

v = sqrt(255319.15 m^2/s^2)

v ≈ 505.28 m/s

Therefore, the speed with which a wave travels on a piano string with a mass per unit length equal to 4.70 x 10^-3 kg/m under a tension of 1200 N is approximately 505.28 m/s.

To know more about specific mass refer here

https://brainly.com/question/28466802#

#SPJ11

The work done for a cart of mass .5 kg is attached to a copper spring with an associated spring constant of 7 N/m is 4.48 Joules.

Given:

Mass, m = 5 kg

Spring constant, k = 7 N/m

Distance, x = 8 m

The work done by a spring force is given by the formula:

Work = Potential energy + kinetic energy

The potential energy is given by:

(1/2) × k × x²

Substituting values:

U = (1/2) ×  7 N/m ×  (0.8 m)²

U = (1/2) ×  7 N/m ×  0.64 m²

U = 2.24 Joules

The kinetic and potential energy are equal. Therefore, the work done is:

W = 2.24 +2.24

W = 4.48 J

Hence, the total work done by the system is 4.48 Joules.

To learn more about work done, here:

https://brainly.com/question/28172139

#SPJ12

To predict the amount of water displaced by a sinking block, you can determine its volume using its dimensions and applying the Archimedes' principle.

To predict the amount of water displaced by a block that sinks without actually placing it in water, you can use the following steps:
1. Measure the dimensions of the block (length, width, and height).
2. Calculate the volume of the block by multiplying its length, width, and height (Volume = Length × Width × Height).
3. Apply Archimedes' principle, which states that the weight of the water displaced is equal to the weight of the submerged object. In other words, the volume of the water displaced will be equal to the volume of the block.
4. Assuming the block is fully submerged, the amount of water displaced would be equal to the volume of the block, which you calculated in step 2.
By following these steps, you can estimate the amount of water displaced by a block without actually submerging it.

Learn more about Archimedes' principle here:

https://brainly.com/question/787619

#SPJ11

A current loop can be used to determine the presence of a magnetic field in a given region of space by measuring the induced electromotive force (emf) generated by the changing magnetic field.

Electromotive force (EMF) is the electrical energy produced by a source of energy such as a battery or generator. EMF is measured in volts and is the electrical potential that drives the current in an electrical circuit. The magnitude of the force is determined by the amount of energy that is being converted from one form to another. For example, a battery will convert chemical energy into electrical energy and the EMF is determined by the amount of energy that is being converted. This EMF is what powers electrical devices and is a measure of the potential energy that can be used. EMF can also be produced by the movement of charged particles such as when an electric current is produced through a wire. EMF can also be induced in a coil of wire when a magnetic field is placed near the coil.

A current loop can be used to determine the presence of a magnetic field in a given region of space by measuring the induced electromotive force (emf) generated by the changing magnetic field. This can be done by connecting a galvanometer to the current loop and then moving it around the region of space in question. If a magnetic field is present, the induced emf in the current loop will cause a deflection in the galvanometer, indicating the presence of a magnetic field.

To learn more about electromotive force

https://brainly.com/question/10497991

#SPJ4

The correct answer is D. The force at the doorknob has more torque.

The force that is applied at a greater distance from the axis of rotation exerts a greater torque. In this case, the force applied at the doorknob is farther from the axis of rotation than the force applied at the midpoint of the door. Therefore, the force applied at the doorknob exerts a greater torque.

The direction of torque is given by the right-hand rule. If you curl the fingers of your right hand around the axis of rotation in the direction of rotation, then your thumb will point in the direction of the torque.

Torque is an important concept in physics and engineering, as it is used to describe the motion of rotating objects. It is responsible for causing changes in the rotational motion of objects, such as causing them to rotate faster or slower, or to change their direction of rotation.

In addition to the force and distance from the axis of rotation, the angle at which the force is applied also affects the torque. If the force is applied perpendicular to the axis of rotation, then the torque will be at its maximum. If the force is applied at an angle to the axis of rotation, then the torque will be less than its maximum value.

Torque is also related to angular acceleration, which is the rate at which an object changes its rotational speed. The relationship between torque and angular acceleration is given by Newton's second law of motion for rotational motion:

Torque = moment of inertia x angular acceleration

where the moment of inertia is a measure of an object's resistance to rotational motion.

In summary, torque is a measure of the rotational force on an object around a fixed axis, and is determined by the force applied and the perpendicular distance from the axis of rotation. It is an important concept in physics and engineering, and is used to describe the motion of rotating objects.

To know more about torque, please click on:

https://brainly.com/question/31248352

#SPJ11

In this present circumstance, an emf can be actuated by any of the accompanying means: Turning the loops around a random axis

2) Changing the shape of the loop because Faraday's Law says that the magnetic flux in a wire loop changes over time, an emf is induced there.

However, since we are informed that the magnetic field is uniform and constant, 1) and 2) are the only alternatives for modifying the flux.

Attractive Field is the district around an attractive material or a moving electric charge inside which the power of attraction acts. a visual representation of the magnetic field that shows how the distribution of a magnetic force within and around a magnetic material.

The magnetic field is the field that is created in the area around a magnetic dipole or a moving charge. Tesla (T) is the SI unit of field intensity for magnetic fields. The area around a magnet where the magnetic force is felt is called the magnetic field.

Learn more about Magnetic field:

brainly.com/question/26257705

#SPJ4

The car's height above sea level will increase by 175 feet and the rate of change of the height of the car with respect to time in terms of v is dH/dt = 175v.

A car is a wheeled, self-powered motor vehicle used for transportation. It is equipped with an engine, transmission, and other components necessary to drive it, and is used to transport people and goods from one place to another.

a) The rate at which the height above sea level is changing with respect to distance in the direction the car is driving is given by the partial derivative of h(N,E) with respect to N. This is the change in the height of the car above sea level for a given change in the distance traveled in the direction of the car's motion. This partial derivative can be expressed as:
dh/dN = 175
This means that for every 1 mile of distance traveled in the direction of the car's motion, the car's height above sea level will increase by 175 feet.

b) To express the rate of change of the height of the car with respect to time in terms of v, we can use the formula velocity = distance/time. Rearranging this equation, we can get the formula time = distance/velocity. Substituting in the rate of change of the height of the car above sea level that we derived in part (a) (dh/dN = 175), we can express the rate of change of the height of the car with respect to time as:
dH/dt = dh/dN * dN/dt
= 175 * v
Therefore, the rate of change of the height of the car with respect to time in terms of v is dH/dt = 175v.

To learn more about car
https://brainly.com/question/29386827
#SPJ4

The ratio of the net power emitted by object B to the power emitted by object A is 2.8

Net power is the difference between the power output of a device or system and the power input required to operate it. It is calculated by subtracting the power input from the power output. Net power is the measure of the efficiency of a system, and is calculated by dividing the net power output by the power input.

The net power emitted by an object is given by the Stefan-Boltzmann law, which states that the net power emitted per unit area is proportional to the fourth power of temperature. Thus, the ratio of the net power emitted by object B to the power emitted by object A is given by:
[tex]P_B/P_A = (T_B/T_A)^4[/tex]
= (90/50)⁴
= 2.8

To learn more about power
https://brainly.com/question/1634438
#SPJ4

By convention, current is in the direction that (a) positive charges move.

Current is the flow of electric charge in a circuit. It is the rate of flow of charged particles, such as electrons, through a conductor. Current has a direction, and by convention, the direction of current is taken as the direction of the flow of positive charges.

However, it is the negatively charged electrons that actually flow through a circuit, and hence, the actual direction of current is opposite to the direction of the flow of electrons. Therefore, current is said to flow from the negative terminal of a battery to the positive terminal, even though the electrons are flowing in the opposite direction.

To know more about current, click here:-

https://brainly.com/question/1255220

#SPJ11

Compared to the earth, the moon is no longer geologically active because it has a much smaller size and therefore less internal heat.

This means that the moon's core has cooled down, resulting in the lack of tectonic activity, volcanic eruptions,

and plate movements that are observed on earth.

Additionally, the moon lacks a protective magnetic field,

which contributes to the erosion of its surface by solar winds and cosmic rays, further limiting any geological activity.

To know more about internal heat refer here

https://brainly.com/question/1581254#

#SPJ11

For an object to be in equilibrium, the sum of all the forces acting on it must be zero (sum of forces = zero) and the sum of all the torques applied to it must also be zero (sum of torques is zero). Additionally, the object must not be spinning and its speed must be zero (speed is zero).

Equilibrium is a state in which opposing forces or influences are balanced. It can refer to a physical, chemical, or biological system in which there is no net change in the position or direction of motion of its components. In economics, it is a situation in which all participants in the market have no incentive to change their behavior. Equilibrium is a necessary condition for markets to function efficiently. It is a key concept in many areas of economics, including microeconomics, macroeconomics, and international economics.

To learn more about equilibrium
https://brainly.com/question/517289
#SPJ4

At speed of about, 6.38 m/s, a bicycle and its rider, with a combined mass of 110 kg , will have the same momentum as a 1300 kg car traveling at 5.4 m/s.

:: Combined mass of rider and bicycle = 110 kg

:: Mass of car = 1300 kg

:: Speed of car = 5.4 m/s

:: Required speed of bicycle = V(assume)

By law of conservation of momentum,

m1 x v1 = m2 x v2,

where, m1 &m2 are masses of bodies, and v1 & v2 are their respective velocities.

Therefore, on putting values, we get,

(1300kg x 5.4m/s) = (110kg x V m/s)

V = (7020 / 110) m/s

V ≈ 6.38 m/s

Therefore, the required speed of bicycle is 6.38 m/s.

Read more about law of conservation of momentum at:

https://brainly.com/question/30338122

The series resistance will increase if the resistance of one of the devices increases. This is because the total resistance in a series circuit is equal to the sum of the individual resistances. Therefore, if one of the resistors increases, the total resistance will also increase.

To explain in more detail, let's say the three resistors have resistances of R1, R2, and R3, and the total resistance is RT. The formula for calculating total resistance in a series circuit is:

RT = R1 + R2 + R3

If the resistance of one of the devices, let's say R2, increases to R2', the new total resistance will be:

RT' = R1 + R2' + R3

Since R2' is greater than R2, it follows that RT' will be greater than RT, meaning that the total resistance has increased.

In summary, an increase in the resistance of one of the devices in a series circuit will result in an increase in the total resistance of the circuit.

To know more about resistance, visit:

https://brainly.com/question/30799966

#SPJ11

To solve this problem, we need to use the principle of moments (torque). Therefore, the mass of the meter stick is 4.92 grams.
The principle of moments states that the sum of the clockwise moments is equal to the sum of the anticlockwise moments.

In this case, the meter stick balances horizontally on a knife-edge at the 50.0 cm mark. This means that the moments on either side of the knife-edge are equal.
Let x be the mass of the meter stick in grams.
Clockwise moments = (distance from knife-edge to center of mass of meter stick) x (mass of meter stick)
Anticlockwise moments = (distance from knife-edge to center of mass of meter stick) x (mass of two 5.00 g coins)
Since the meter stick balances at the 45.5 cm mark with the two 5.00 g coins stacked over the 12.0 cm mark, we can use the principle of moments to solve for x:
Clockwise moments = Anticlockwise moments
(50.0 cm - x/2) x (x) = (12.0 cm) x (2 x 5.00 g)
Simplifying the equation, we get:
50.0 cm x x - (x/2) x x = 120.0 cm x g
50.0 x^2 - 0.5 x^2 = 1200
49.5 x^2 = 1200
x^2 = 24.24
x = 4.92 g
Therefore, the mass of the meter stick is 4.92 grams.

To know more about torque visit:

https://brainly.com/question/31248352

#SPJ11