The fraction of an initial amount of dimethylether remains after 4710 seconds is 1/8.
Given the decomposition of dimethylether at 504oc is first order.
The half-life (t) = 1570 seconds.
A radioactive isotope's half-life is the length of time it takes for one half of it to decay. The half-life of a particular radioactive isotope is not influenced by the environment and is not dependent on the isotope's initial concentration.
Time taken (t1) = 4710 seconds.
Therefore, the fraction of an initial amount of dimethylether that remains after 4710 seconds will be: 1/2^n where n = t1/t such that:
n = 4710/1570 = 3.
Then the required fraction = 1/2^3 = 1/8.
To learn more about half-life click here https://brainly.com/question/24710827
#SPJ4
direct gene activation involves a second-messenger system.
Direct gene activation is a mechanism by which hormones and other signaling molecules can directly bind to receptors on the DNA and activate or repress the transcription of specific genes
This type of gene regulation does not involve a second-messenger system. A second-messenger system is a cascade of reactions that amplifies and amplifies the signal generated by a hormone or other signaling molecule. This system is typically triggered by a hormone or other signaling molecule binding to a receptor on the cell membrane. This binding causes a conformational change in the receptor, which in turn activates an intracellular signaling cascade that ultimately leads to changes in gene expression or other cellular responses. Second messengers are small molecules like cAMP, cGMP, IP3, DAG, and Calcium that are produced in response to the binding of a hormone or other signaling molecule to the receptor.
Examples of second-messenger systems include the cyclic AMP (cAMP) system and the phosphoinositide system. These systems are used by hormones such as adrenaline, glucagon, and thyroid hormones to regulate gene expression and other cellular responses.
To know more about gene activation, click here,
brainly.com/question/25703686
#SPJ4
caught in or between hazards are related with excavations t or f
False - caught in or between hazards are associated with excavations.
The hazards deemed to be the most dangerous are caught in or between hazards.
Important body parts are highly vulnerable to being cut or completely disabled in 'caught in or-between' hazards if proper safety measures are not used.In most cases, the only treatment available after an accident is amputation.As a result, it is absolutely necessary to plan the work ahead of time, to remain alert and attentive throughout the work process, and to implement all necessary safety measures."Caught in-between" hazards kill workers in a variety of ways. These include: cave-ins and other excavation hazards; body parts pulled into unguarded machinery; standing within the swing radius of cranes and other construction equipment; and being caught between equipment and fixed objects.
Learn more about " "Caught in-between" to visit here;
https://brainly.com/question/1342691
#SPJ4
Do clams have hearts?.
nitrogen in the air
to
A
nitrate in soil
decay
B
decay
ammonium compounds
(b) Describe what happens at A, B and C
(6 marks)
(c) How are some plants like the garden pea able to survive in soil deficient in nitrates?
(3 marks)
(d) Describe how nitrates are leached from the soil (3 marks)
(e) Nitrogen is a vital component of every living organism. Give ONE importance of nitrogen
to animals and ONE importance to plants. (2 marks)
Remains of plant and animal waste as well as soil organic materials serve as a constant source of nitrogen recycling. Crops, gaseous loss, runoff, erosion, and leaching all deplete the soil's nitrogen content.
How long does nitrogen stay in the soil?Until there has been sufficient rainfall to cause crop removal or losses due to extremely high rainfall. Nitrogen can be lost after it has been integrated into the soil by crop removal, leaching, or denitrification. In order for plants to develop, crop removal is necessary.Due to the fact that plants require a lot of it, nitrogen is the nutrient that is used most frequently to restrict plant development (10-60 g per kg of plant mass, to be exact). Furthermore, it does not linger in the soil for very long. It instead winds up in areas where we don't want it: in groundwater, bodies of water, and even the atmosphere.To Learn more About soil organic materials refer To:
https://brainly.com/question/4618039
#SPJ1
Groundwater can be _________ by landfills and septic tanks.
emptied
drained
contaminated
filled
Answer:
contaminated
Explanation:
Groundwater can be contimated by landfills and septic tanks
How does the structure of a molecule affect the properties of the substance?.
The molecular structure influences the molecular properties, since the shape of the molecule has a lot to do with the polarity of the compound. Polar compounds tend to dissolve in polar compounds, have high boiling and melting points, and form solids or liquids.
The polarity of a molecule strongly influences its physical properties. More polar molecules have stronger intermolecular forces between them and generally have higher boiling points (as well as various other physical properties). The shape of molecules is very important in biology as it determines how most molecules recognize and react to each other. One nerve cell in the brain signals another nerve cell by releasing molecules of a specific shape in order to find a matching receptor molecule on the surface of the receptor cell.
Learn more about Molecule
brainly.com/question/12864258
#SPJ4
the high speed signals that pass along the axons of nerve cells ia the function of ?
The high speed signals that pass along the axons of nerve cells is the function of A. Motor neuron; B. Sensory neuron; C. Relay neuron.
An electrical impulse in a neuron moves from the dendritic end to the axonal end. Chemicals released from one neuron's axonal end travel across the synapse and cause an electrical impulse of a similar nature to be produced in the dendrite of another neuron. A neuron transmits electrical impulses to muscle and gland cells in addition to other neurons.
A nerve impulse is a form of intercellular communication used by neurons. A nerve impulse, also known as an action potential, is primarily produced by electrical signals travelling along dendrites. Ions entering and exiting the cell cause the action potential.
From the dendritic end to the axonal end, a nerve impulse moves. A comparable electrical impulse is produced in a dendrite of another neuron when chemicals released from one neuron's axonal end cross the synapse. A neuron can provide electrical signals to muscle and gland cells in addition to other neurons.
To learn more about nerve cells Please click on the given link:
https://brainly.com/question/13393634
#SPJ4
hormones are released into the _______ space surrounding endocrine cells and then diffuse into the bloodstream.
Hormones are released into the extracellular space space surrounding endocrine cells and then diffuse into the bloodstream.
Hormones are chemical messengers that are produced by endocrine cells and released into the bloodstream to regulate various physiological processes in the body.
When an endocrine cell is stimulated, it releases hormones into the extracellular space surrounding it. These hormones then diffuse into the bloodstream, where they can travel to target cells and tissues throughout the body. The hormones bind to specific receptors on the surface of target cells, triggering a response.
The endocrine cells are found in various endocrine glands such as the pituitary gland, thyroid gland, adrenal gland, pancreas and gonads. Each gland produces specific hormones that regulate a variety of physiological processes, such as growth and development, metabolism, and reproduction. Hormones also play a role in maintaining homeostasis, which is the balance of internal conditions in the body.
To know more about hormones, click here,
brainly.com/question/8162998
#SPJ4
Which observation suggests that eukaryotes may share a more recent common ancestor with bacteria than with archaea?Many genes that affect metabolism in yeast are more similar to bacterial than archaeal genes.
Many yeast metabolism related genes resemble bacterial genes more so than archaeal genes.
Do both bacteria and archaea share any genes in common?
However, researchers later found that bacteria and archaea differ significantly in terms of molecules. Genetic studies have also shown that Domains Archaea and Eukarya are more closely related each other than to Genus Bacillus in terms of phylogeny.
What distinguishes bacterial from archaeal cells?
In contrast to archaeal cell walls, which are made of polysaccharides, bacteria cell walls are made of peptidoglycan, a mixture of proteins and carbohydrates sugars. Their cell walls' composition is also different from that of eukaryotic cell walls seen in fungi, insects, or plants cellulose chitin.
To know more about Archaea visit:
brainly.com/question/28768971
#SPJ4
Complete question
Which observation suggests that eukaryotes may share a more recent common ancestor with bacteria than with archaea?
a. behavioral traits
b. the tree that represents the fewest evolutionary changes, in either DNA sequences or morphology
c. gross morphological traits
d. Many genes that affect metabolism in yeast are more similar to bacterial than archaeal genes.
What is the name of the sugar that is made during the Calvin cycle?.
Glucose is the name of the sugar made during the Calvin cycle.
The Calvin cycle, a light-independent reaction, biosynthetic step, dark reaction, or photosynthetic carbon reduction cycle of photosynthesis, is a series of chemical reactions that convert carbon dioxide and hydrogen-carrying compounds to glucose. The Calvin Cycle reaction adds carbon (from atmospheric carbon dioxide) to a simple five-carbon molecule called RuBP. These reactions use chemical energy from NADPH and ATP generated in the photoreaction. The final product of the Calvin cycle is glucose. Carbon leaves the Calvin cycle to synthesize other products, such as triose phosphate to synthesize sucrose in the cytosol.
Learn more about Calvin Cycle
brainly.com/question/3199721
#SPJ4
What limits cell size How can the limitation of cell size be overcome?.
A cell's surface area grows as the square of its radius as the radius rises, yet its volume grows as the cube of its radius (much more rapidly). Thus, a cell's surface area to volume ratio drops as it grows in size.
A limited amount of cytoplasm can be under the control of each nucleus. This is one of the restrictions on certain biological cells' sizes. By possessing many nuclei, certain cells are able to get beyond this particular restriction. These unique cell types have multiple nuclei.
In biology, a cell is a basic membrane-bound entity that houses the building blocks of life and is the basic building block of all other living entities. As in the case of bacteria or yeast, a single cell is frequently an entire organism in and of itself.
To know more about cell
https://brainly.com/question/27666800
#SPJ4
a cell contain 98% water in its cytoplasm is place in a 2% salt solution. it should
Answer:
• The cell would neither lose nor gain water
Explanation:
The condition does not permit diffusion. The concentration of salt in the internal environment and the surrounding environment is in equilibrium.
what surrounds the epiphysis of the bones to reduce friction?
Epiphysis of Bone is covered by a thin layer of compact tissue called articular cartilage or Hyaline Cartilage. It reduces the friction caused due to movement of Bones.
A bone has two parts Long portion called Diaphysis and Two ends called Epiphysis. Epiphysis is covered with articular cartilage that prevents the friction where the bone articulates or joints , Hyaline cartilage is present at both ends of long bone, It forms a smooth surface on bone during the Movement of joints it reduces friction. Cartilage is a connective tissue which helps in joining one bone with next bone. It gets withered as it ages and the damage in Hyaline cartilage causes painful joints and results in Osteoarthritis.
Learn more about Hyaline Cartilage here
https://brainly.com/question/30118092
#SPJ4
On what factors does numbers of sweaters a factory owner produces depend?
They are employed in the creation of goods and services. Land, labor, capital, and entrepreneurship are the four categories of components of factory production that economics distinguish between.
What are the four production factors used for?The factors of production are the resources needed to produce a good or service in order to earn money. The four elements of production are land, labor, capital, and entrepreneurialism, according to economists. An economy could be said to be built on them.
What are the four production factors?Land, labor, capital, and entrepreneurship are the four categories into which economists generally divide the components of production. Natural resources are referred to as "land," "labor" is defined as "work effort,” and "capital" is everything created that is used to create anything else.
To know more about factory production visit:-
https://brainly.com/question/2275669
#SPJ1
Which process allows glycolysis to continue in the absence of oxygen?
A. Chemosynthesis
B. Photosystem 1
C. Cellular respiration
D. Fermentation
D. Fermentation, Glycolysis can proceed in the lack of oxygen thanks to fermentation.Fermentation is a crucial technique for producing ATP without the use of oxygen.
Inside the absence of oxygen, glycolysis continues through what process?Pyruvate will go through a procedure known fermentation when oxygen is absent.The NADH + H+ produced glycolysis would be recirculated to NAD+ during fermentation, allowing glycolysis to proceed.NAD+ is oxidized during glycolysis to create NADH + H+.
What is the name of oxygen-free fermentation?Anaerobic respiration is the term for respiration that occurs without oxygen.Another name for it is fermentation.Anaerobically breaking down glucose in this mechanism results in the production of two ATP.
To know more about Fermentation visit:
https://brainly.com/question/13050729
#SPJ4
rounded knob on the humerus that articulates with the radius
Located on the distolateral end of the humerus, the capitulum (Capitulum humeri) is a tiny, knob-like projection. It joins with the head of the radius bone at the elbow.
What is Anatomy of the Humerus bone?The shoulder girdle, also known as the pectoral girdle, which is made up of the scapula and clavicle bones, connects the humerus' distal end to the axial skeleton. The glenoid fossa, or scapular hollow, accommodates the rounded humeral head. The shoulder joint is given a lot of mobility but also loses some stability due to this small dip on the lateral side of the scapula.The picture descriptionmiddle portion of the humerus is a long, cylindrical shaft. Except for the deltoid tuberosity, which is situated close to the lateral margin's midway, the surface of the shaft is mostly smooth. Numerous muscles that move the upper arm and lower arm link to the shaft at this location.The trochlea of the humerus and the trochlear notch of the ulna, which resembles a pulley, make up the humero-ulnar joint. The concave surface of the radial head's superior surface and the humerus' rounded capitulum combine to form the humeroradial joint.To Learn more About humerus refer to:
https://brainly.com/question/7194643
#SPJ4
crystallization process diagram
Explanation:
[tex]here \: is \: your \: answer.[/tex]
[tex]have \: a \: good \: day.[/tex]
How do leaves reflect light?.
The leaves reflect light by the unused green light.
Leаves exhibit color for the sаme generаl reаson аs аny other object. They reflect аnd аbsorb certаin wаvelengths of visible light. There аre three mаin pigments thаt аllow leаves to do this. The pigments аre chlorophyll, cаrotenoids , аnd аnthocyаnins . These pigments аre primаrily just different аrrаngements of three types of аtoms-cаrbon, hydrogen, аnd oxygen-which hаve bonded in different wаys to form molecules.
Plаnt leаves аre green becаuse green light is less efficiently аbsorbed by chlorophylls а аnd b thаn red or blue light, аnd, therefore, green light hаs а higher probаbility to become diffusely reflected from cell wаlls thаn red or blue light. Chlorophylls do not reflect light.
For more information about photosynthesis refer to the link:
https://brainly.com/question/1388366
#SPJ4
Imagine you want to grow more of this kind of plant, quickly. How would you do it and what plant parts would you use?.
The best and quickest way to grow more of this plant would be to take stem cuttings and propagate them.
What are methods to propagate plants quickly?1. Division: Division is one of the most common methods used to propagate plants quickly. This involves dividing the root system of a mature plant into sections and replanting the sections. This method is used to propagate plants with multiple stems and roots, such as grasses, shrubs, and perennials.
2. Layering: Layering is a propagation technique used to promote the formation of roots on a stem before it is detached from the parent plant. The stem is bent down to the ground and partially buried, with a weight or pin holding it in place. When roots form, the stem can be cut away from the parent plant and transplanted.
3. Cuttings: Taking cuttings from a mature plant is one of the most common propagation methods. Cuttings can be stem, leaf, or root cuttings, and the components are placed in a rooting medium until the cuttings develop roots and can be transplanted.
4. Grafting: Grafting is a propagation technique used to combine two compatible plants. A stem or scion is taken from one plant and grafted onto the root system of another. This method is used to propagate plants that are difficult to propagate by other methods, such as certain fruit trees.
5. Air layering: Air layering is a propagation technique used to promote the formation of roots on a stem before it is detached from the parent plant. The stem is covered with a damp growing medium and then wrapped in a plastic bag or covered with a potting mix. When roots form, the stem can be cut away from the parent plant and transplanted.
To learn more about propagate plants refer to:
brainly.com/question/4483684
#SPJ4
1.08 Lab: Natural Selection
Biological evolution is the process by which populations of organisms change over time. In this lab, you were able to observe how a population of peppered moths can change based on their environmental surroundings. Why do these types of changes/adaptations occur?
Answer: These types of changes/adaptations occur in order for the peppered moths to camouflage which gives them a higher chance of surviving and producing offspring.
Explanation: When the environment changed, due to pollution, the color of the moth population shifted because light-colored moths became easier to see so they were eaten more often. The darker moths were better camouflaged and more likely to survive and produce offspring. Organisms that survive have a better chance of reproducing so the population continues to grow.
What are the benefits of the rounded structure of a typical red blood cell? How will the jagged, thin shape of these sickle cells be a disadvantage?
Answer:
Sickle cell anemia is one of a group of inherited disorders known as sickle cell disease. It affects the shape of red blood cells, which carry oxygen to all parts of the body.
Red blood cells are usually round and flexible, so they move easily through blood vessels. In sickle cell anemia, some red blood cells are shaped like sickles or crescent moons. These sickle cells also become rigid and sticky, which can slow or block blood flow.
what do the sign and magnitude of the δg of a reaction tell us about the speed of the reaction?
The amplitude and sign both influence the reaction's quickness and spontaneity. The size of G determines how quickly a response happens; the sign does not matter.
Which part of the equation ΔG δh tδs tells you if a process is spontaneous?As indicated, the response is spontaneous if G° is negative, which it is. The sign of G° is dependent on the magnitude differences between the H° and TS° terms because S° and H° for this reaction have the same sign.Exergonic reactions are those with a negative G that liberate free energy. Energy is Exiting the System, which is a helpful mnemonic for the phrase "exergonic." The beginning state, the reactants, contain more free energy than the final state, the products, when the G is negative.A reaction's rate can be influenced by any one of the following five general properties:How much of each reactant is present. The rate increases with increasing concentration.Temperature, the physical condition of the reactants, the presence (and concentration/physical form) of a catalyst (or inhibitor), and light are all factors in the reaction.To Learn more About spontaneity refer to:
https://brainly.com/question/13892753
#SPJ4
what shape does a bloodstain make when it falls perpendicular to a surface
A bloodstain from a perpendicular fall will typically make a round or oval shape.
What is bloodstain?
Bloodstain is a dried area of blood on a surface such as clothing, carpet, or other material. Bloodstains can be the result of a crime, an accident, or a medical procedure. Bloodstains can also be used in forensic science to help identify a perpetrator or victim. They are studied to determine the shape, size, and composition of the blood. Bloodstains can also be used to determine the angle and direction of the impact that caused them.
Therefore, A bloodstain from a perpendicular fall will typically make a round or oval shape.
To learn more about bloodstain
Here: https://brainly.com/question/14147273
#SPJ4
Now choose one of the resources used for energy production that you have studied in this lesson. Describe how the way humans use or obtain this resource might impact the natural resource you described in part A. If you don't think the natural resource in part A is affected, explain why.
In general, the way humans use or obtain any resource can have a significant impact on the natural resources.
For example, if the resource is fossil fuels such as coal, oil, and natural gas, the extraction and burning of these resources can lead to pollution of air, water, and soil. It also contributes to climate change and global warming, which can have severe impacts on various natural resources such as oceans, forests, and wildlife.
What is the energy production about?Mining and drilling for fossil fuels can also lead to habitat destruction and fragmentation, which can negatively impact wildlife populations and biodiversity.
The production and transportation of these resources can also lead to spills and leaks, which can harm aquatic wildlife and their habitats.
In conclusion, the way humans use or obtain resources can have a significant impact on the natural resources, and it's important to consider the environmental impact of different energy production methods in order to make more sustainable choices.
Learn more about energy from
https://brainly.com/question/22278603
#SPJ1
When were enzymes first isolated?
Answer:
1833
Explanation:
it was in 1833 by Anselme payen
where do terminal ends synapse with cell bodies in the central nervous system?
Mostly in central nervous system, terminal ends make synapses with cell bodies and gray matter.
In basic terms, how does the nervous system?The body's well-organized network of nerve tissue. The peripheral nervous system, which connects the brainstem to the rest of the body, the central nervous system, and additional nerve tissue are all included in it.
How is the nervous system impacted?Meningitis, encephalopathy, measles, and dorsal abscess are a few examples of infections. structural conditions such brain or spinal cord damage, Bell's palsy, cervical disk herniation, the carpal tunnel syndrome, tumors in the brain or spinal cord, nerve damage, and Guillain-Barré syndrome.
To know more about Nervous system visit:
brainly.com/question/2114466
#SPJ4
the gastrointestinal tract is _____________ft long
The gastrointestinal tract is 18 ft long.
The digestive system's path from the mouth to the anus is known as the gastrointestinal tract (GI tract, digestive tract, alimentary canal). All of the major digestive systems organs, such as the esophagus, stomach, and intestines, are located inside the GI tract in both humans and other animals.
The digestive system is made up of the liver, pancreas, and gallbladder as well as the gastrointestinal tract, commonly known as the GI tract or digestive tract. From the mouth to the anus, the GI tract is made up of several hollow organs connected by a protracted, twisted tube.
Learn more about the gastrointestinal tract here:
https://brainly.com/question/28207416
#SPJ4
How many sister chromatids are there in the primary oocytes if there are 46 single chromosomes in the Oogonium?.
Sister chromatids are there in the primary oocytes if there are 46 single chromosomes in the Oogonium is 92 chromatids
Fertilization is the process of fusion of ovum and sperm cells to produce diploid cells. Diploid cells are cells that consist of 46 chromosomes or 23 pairs of chromosomes.
A chromatid is one of the two replicated arms of a chromosome formed by duplication of chromosomes during S phase or Interphase synthesis. The chromatids consist of two arms namely the p arm and the q arm, and during mitosis the fixed chromatids are joined to the centromere and are called sister chromatids. So that the 46 single chromosomes in the primary oocyte have 92 chromatids because each chromosome has 2 chromatid arms.
Learn more about chromosomes at:
https://brainly.com/question/30077641
#SPJ4
Oberve: The rider have mae of 10 gram (top), 100 gram (middle), and 1 gram (bottom). Drag the 100-gram rider to 300. At thi poition it balance a 300-gram ma. What happen to the pointer?
The pointer goes down as the rider have masses of 10 gram (top), 100 gram (middle), and 1 gram (bottom) when drag the 100-gram rider to 300.
Levers of a particular kind are used to measure mass, or the quantity of substance in an item, such as a triple beam balance. On the measurement tray is placed a thing with an unknown mass. To balance the object, a group of sliding weights known as riders slide on beams on the opposite side of a fulcrum. The triple beam balance is a common tool for determining an object's mass. It consists of three beams, each of which has a single sliding weight whose size matches the notches on the notched scales of the beams.
To learn more about weight click here https://brainly.com/question/29856236
#SPJ4
5 animals or more, mammals, adorable
Answer:
5 adorable mammals,
1. Dogs & Cats
2. Horses
3. Whales
4. Ferret
5. Cows
Mammals are a warm-blooded vertebrate animal of a class that is distinguished by the possession of hair or fur, the secretion of milk by females for the nourishment of the young, and (typically) the birth of live young.
