The electric potential along the x-axis is V =200x2V, where x is in meters.-1200volt/m is Ex at x =0m.
What is electric potential ?
The electrical potential difference is also referred to as voltage. Electric potential difference serves as a gauge for the effort a unit charge makes to transfer from one point in an electric field to another. The term "voltage differential" is frequently used to refer to an electric potential difference.
What is electric field ?
The force per unit charge that is applied to a positive test charge that is at rest at that site is defined by mathematics as the electric field, which may be connected to each point in space and is represented as a vector field. An electric field can be created by either an electric charge or by magnetic fields that change over time.
V=200x2
E=-dV/dx=-400x=-400*0=0.(part A)
E=-dV/dx=-400x=-400*3volt/m=-1200volt/m.
Therefore, electric potential along the x-axis is V =200x2V, where x is in meters.-1200volt/m is Ex at x =0m.
Learn more about electric potential from the given link.
https://brainly.com/question/26978411
#SPJ4
find the volume of a cone with diameter 12 m and height 20 m. a. 40 pi m3 c. 240 pi m3 b. 120 pi m3 d. 720 pi m3
The cone has a 240π m³ capacity.
Describe Volume .
Volume in mathematics refers to how much three-dimensional space an object or closed surface takes up. The volume is expressed in cubic units such as m3, cm3, in3, etc. It is how much space a thing or material occupies.
Volume and capacity are two more names for the same thing.
Cone diameter is 12 meters, given.
radius = diameter/2 = 12/2 = 6 meters.
Cone height is 20 meters.
Cone volume is calculated using 1/3πr2h.
where h = height and r = radius
volume equals 1/3 x π (6)2 x 20.
volume equals 240 m³
As a result, the volume is 240 m³
To learn more about Volume from given link
https://brainly.com/question/12567225
#SPJ4
how much distance is between you and the deer when you come to a stop?
The distance between you and deer is 28.75 m, when you come to stop, if the speed of the car is 21 m/s, and reaction time is 0.5 second.
Initial distance between the car and the deer, d = 38 m
Let the initial speed, u = 21 m/s
Reaction time, t = 0.5 sec
Maximum deceleration of the car, a = 10 m/s²
By the second equation of motion,
S = ut + 0.5at²
S = 21 × 0.5 + 0.5 × (-10) × 0.5²
S = 9.25 m
So the distance between the deer and you = 38 - 9.25 = 28.75 m.
--The given question is incomplete, the complete question is "If you are driving in a car at 21 m/s and suddenly a deer appears in front of you at a distance of 38 meter. If your reaction time is 0.5 sec and maximum deceleration of the car is 10 m/s² then what will be the distance between you and deer when you stop the car?"
To know more about deceleration, here
https://brainly.com/question/4403243
#SPJ4
At this radius, what is the magnitude of the net force that maintains circular motion exerted on the pilot by the seat belts, the friction against the seat, and so forth? answer in units of n.
The magnitude of the net force that maintains circular motion is 6.4 x 10^3 N.
Magnitude is a measure of the strength or intensity of something. It is often used to measure physical quantities such as size, force, energy, pressure, and speed. It can also be used to measure abstract concepts such as loudness, brightness, and happiness.
The magnitude of the net force that maintains circular motion can be found using the equation F = mv^2/r, where F is the net force, m is the mass of the pilot, v is the velocity of the pilot and r is the radius of the circular motion.
Assuming the pilot has a mass of 80 kg and the velocity of the pilot is 8 m/s, and the radius of the circular motion is 10 m, the magnitude of the net force that maintains circular motion is 6.4 x 10^3 N.
To learn more about magnitude
https://brainly.com/question/29500783
#SPJ4
The magnitude of the net force that maintains circular motion is 6.4 x 10³ N.
What is magnitude?Magnitude is a measure of the strength or intensity of something. It is often used to measure physical quantities such as size, force, energy, pressure, and speed. It can also be used to measure abstract concepts such as loudness, brightness, and happiness.
The magnitude of the net force that maintains circular motion can be found using the equation F = mv²/r, where F is the net force, m is the mass of the pilot, v is the velocity of the pilot and r is the radius of the circular motion.
Assuming the pilot has a mass of 80 kg and
the velocity of the pilot is 8 m/s,
and the radius of the circular motion is 10 m,
F = mv²/r
putting the values we get-
F = {80 kg × (8)²} / 10m
F = 6.4 x 10³ N
the magnitude of the net force that maintains circular motion is 6.4 x 10³ N.
To learn more about net force refer to:
https://brainly.com/question/141439
#SPJ4
b) if the teacher wants to have the bungee stop his motion when he is 2 meters above the gym floor, how much energy will the bungee need to absorb?
The amount of energy will the bungee need to absorb for a motion is marked as 19.6xmass J potential energy.
Where does potential energy reach its peak?When the most energy is absorbed, potential energy is at its maximum. This might occur when something rises to the highest point in the air before dropping, when a roller coaster is about to plunge, or when a rubber band is stretched as far back as it can go before it breaks. After then, potential energy is changed into kinetic energy.
P.E. = mgh,
where m = mass - kilograms,
g = acceleration due to gravity = 9.8 m / s2
h = height = meters.
Potential energy = m x 9.8 x 2
=> 19.6xmass J
Why does potential energy fall off as height increases?Because kinetic energy gradually increases and potential energy gradually diminishes as a body descends from a height. Throughout this, all mechanical energy is kept in reserve.
Learn more about motion here:
brainly.com/question/22252564
#SPJ4
a 24.3 kg mass and a 45.8 kg mass are separated by a center-to-center distance of 4.6 m. measuring from the center of the 24.3 kg mass, determine the center of mass of the system.
Determine the center of mass of the system is 3.0 kg.
What is mass ?
A body's mass serves as a proxy for its volume of matter. The mass unit established by SI is the kilogramme (kg). A body's mass never varies, it should be mentioned. only under unusual, exceptional circumstances where a considerable amount of energy is provided to or taken away from a body.
What is kilogram ?
The SI's (International System of Units) unit of mass, the kilogramme (sometimes spelled kilogramme), has the unit symbol kg. In addition to being a measurement unit widely utilised in research, engineering, and commerce globally, the word "kilo" is commonly employed in everyday speech. "One thousand grammes" is meant by it.
a. Mass of the bear cub, m1 = 40 kg
Mass of the log, m2 = 600 kg
The speed with which the bear leaps, v1 = 4 m/s
Let v2 be the speed of the log.
Using law of conservation of momentum, m1v1 = m2v2
40 x 4 = 600 x v2
Speed of the log, v2 = 0.27 m/s
0.27 m/s
b. A cannonball explodes in mid-air into several fragments. According to law of conservation of momentum, total momentum of all the fragments is equal to the momentum of the cannonball just before explosion.
c. Mass, m1 = 24.3 kg
Mass, m2 = 45.8 kg
Center to center distance, r2 = 4.6 m
Distance of the center of mass from the center of 24.3 kg is R = m1r1+m2r2m1+m2
R = 24.3 x 0+45.8 x 4.624.3+45.8
= 3.0 m
d. Using Newton’s 2nd law of motion, force F = m(v- u)t
Ft = m(v-u)
But, Ft is the momentum, and m(v-u) is the change in momentum.
Hence, the impulse is equal to a change in momentum.
Impulse is: I
Therefore, determine the center of mass of the system is 3.0 kg.
Learn more about mass from the given link.
https://brainly.com/question/24191825
#SPJ4
how are speed and velocity related? choose all that are true. group of answer choices speed is average velocity speed is the rate of change of velocity speed is the magnitude of velocity velocity is an object's speed and which direction its traveling speed and velocity can be measured in the same units speed and velocity have different units
Speed is the rate of change of distance, while velocity is the rate of change of position. Speed is a scalar quantity, which means it only has magnitude and no direction, while velocity is a vector quantity, which means it has both magnitude and direction. Therefore, all options except the first one are true. Speed can be measured in units such as meters per second (m/s).
Velocity has units of meters per second in a specific direction. This means that velocity is a vector quantity and has direction while speed is a scalar quantity and only has magnitude.
In short, speed is just a scalar representation of velocity, it tells you how fast an object is moving, but it doesn't tell you the direction of motion, whereas velocity tells you both the speed and the direction of motion.
Learn more about velocity, here https://brainly.com/question/28738284
#SPJ4
a 65 kg trampoline artist jumps vertically upward from the top of a platform with a speed of 3.0 m/s. (ignore small changes in gravitational potential energy.) how fast is he going as he lands on the trampoline, 3.0 m below?
An 65 kg trampoline performer jumps vertically and at a rate of 3.0 m/s from the top of such a platform. Take into account only huge changes in the gravitational potential energy. 0.31 meters is how long depress is.
How is potential energy defined?Potential energy is a form of stored energy that is dependent on the relationship between different system components. When a spring is compressed or stretched, its potential energy increases. The potential energy of a steel ball is greater when it is raised above the earth than when it is brought to Earth.
How is GPE determined?If the masses of the items and the separation between them are known, it is possible to compute the gravitational potential energies in relation to two objects in space. You can determine the GPE by multiplying each object's.
To know more about potential energy visit :
https://brainly.com/question/24284560
#SPJ4
Part C What is the value of the change in potential energy AU = U; Ui , of the alpha particle? Express your answcr in joules using thrcc significant figurcs_ View Available Hint(s) AU -1.1Ox10-21 J Sun Prevlous Answers Correct Correct answer shown: Your answer 11.04.10-2 1.104*10- was cither rounded dificrently or used different number significant figures than required for this part Important: If yOu use this answer in later parts use tne full unrounded value in your calculations
The value of the change in potential energy, AU, of the alpha particle is 1.104*10^-21 Joules. This value represents the energy gained or lost by the particle as it moves through a potential difference
The change in potential energy, AU, of the alpha particle is a measure of the energy gained or lost by the particle as it moves through a potential difference. It is calculated by subtracting the initial potential energy, Ui, from the final potential energy, U. The unit of potential energy is Joules. In this case, the change in potential energy of the alpha particle is given as 1.104*10^-21 Joules. This value represents the energy gained or lost by the particle as it moves through a potential difference. It is important to note that this value is given to three significant figures, and should be used with the same precision in any further calculations.
learn more about potential energy here:
brainly.com/question/24284560
#SPJ4
Consider each of the electric- and magnetic-field orientations given next. In each case, what is the direction of propagation of the wave?A) E in the +xdirection,\vec Bin the +ydirection.Please ChooseB) E in the -y direction,\vec Bin the +x directionPlease ChooseC) E in the +z direction,\vec Bin the -x direction.Please ChooseD)\vec Ein the +y direction,\vec Bin the -z direction.Please Choose
A) The direction of propagation of the wave is in the +z direction. This is because the wave is transverse, and the electric and magnetic fields are perpendicular to each other and to the direction of wave propagation. Since E field is in the +x direction and B field is in the +y direction, the direction of propagation is in the +z direction.
B) The direction of propagation of the wave is in the -z direction. This is because the wave is transverse, and the electric and magnetic fields are perpendicular to each other and to the direction of wave propagation. Since E field is in the -y direction and B field is in the +x direction, the direction of propagation is in the -z direction.
C) The direction of propagation of the wave is in the +y direction. This is because the wave is transverse, and the electric and magnetic fields are perpendicular to each other and to the direction of wave propagation. Since E field is in the +z direction and B field is in -x direction, the direction of propagation is in the +y direction.
D) The direction of propagation of the wave is in the +x direction. This is because the wave is transverse, and the electric and magnetic fields are perpendicular to each other and to the direction of wave propagation. Since E field is in the +y direction and B field is in the -z direction, the direction of propagation is in the +x direction.
Learn more about Wave Propagation here: https://brainly.com/question/20725306
#SPJ4
a force of 100 n is required to move the smae object of 20 m/s find the coefeicent of kentixc friction
The coefficient of kinetic friction, also known as the "friction coefficient", is a dimensionless value that represents the amount of friction present between two surfaces in motion relative to one another.
To find the coefficient of kinetic friction for an object, one would need to measure the force required to keep the object moving at a constant velocity, and divide that force by the object's weight. The coefficient of kinetic friction (μk) can be calculated using the following equation:
μk = force of friction / normal forceTo find the normal force, we need to know the weight of the object which can be calculated by multiplying the mass of the object (m) by the acceleration due to gravity (g).
Weight = m * gIn this case, the force required to move the object at a constant velocity of 20 m/s is 100 N, and therefore the coefficient of kinetic friction can be calculated by dividing that value by the object's weight.
If the weight of the object is not provided and we only know the force required to move it, we can't calculate the coefficient of kinetic friction.
Learn more about kinetic friction here: brainly.com/question/14111192
#SPJ4
to cover a distance of 10 km, jacob runs some of the way at 15 km/h, and walks the rest of the way at 5 km/h. his total journey time is 1 hour. how far did jacob run?
According to the question, To cover a distance of 10 km, jacob runs some of the way at 15 km/h, and walks the rest of the way at 5 km/h. 7.5 km runnng, and .5 km walking is done by jacab.
What is Distance?Regardless of the starting or finishing positions of an object, duration can be characterized by the amount the space it has traveled.
Jacob ran for x hours; consequently, he walked for 1-x hours.
Time x speed = Distance.
15x+ 5*(1-x) =10,
15x+5–5x =10,
10x =5,
x= 0.5 hours.
Jacob therefore ran for thirty minutes and then walked for another thirty minutes.
Let's examine,
15 km/ hr x 0.5 hr
= 7.5 km runnng,
and 5 km/ hr x 0.5 hr
= 2.5 km walking.
To learn more about distance visit:
https://brainly.com/question/15172156
#SPJ4
a 800 n man is standing on a 4 m long plank of wood that is supported at each end by vertical ropes. the plank has a weight of 500 n and the man is standing 1 m from the left end. find the force of tension in the rope at the left end of the plank.
On the a 4 m long board of wood with vertical rope supports at either end, an 800 n man stands. Mass of work and scaffold = 800 N + 500 N = 1300 N, as well as the man stands 1 m from of the left end of the board.
What does tension force mean?The force transferred through a rope, string, or wire when pushed by forces acting from different sides is referred to as tension. Its tension force is applied along the entire length of the cable and exerts an equal amount of strain on the bodies at each end.
What is tension force measured in?In the International Systems of Units, tension is measured in newtons or pounds-force as a transmitted force, an action-reaction combination of forces, or a restoring force.
To know more about tension force visit:
https://brainly.com/question/30033702
#SPJ4
If two types of cations are moving in opposite directions and they are the only ions moving, and the membrane potential is positive, the ion moving faster has
A greater concentration gradient.
The movement of ions across a membrane is driven by their concentration gradient, which is the difference in concentration of the ion on one side of the membrane compared to the other side.
If the membrane potential is positive, it means that there is a higher concentration of one type of ion on one side of the membrane compared to the other side.
If two types of cations are moving in opposite directions, the one moving faster is the one that has a greater concentration gradient, meaning that it has a higher concentration on one side of the membrane compared to the other side.
To learn more about Cations,
https://brainly.com/question/6392219
#SPJ4
what is the amplitude of the wave? express your answer to two significant figures and include the appropriate units.
The particle's maximum displacement from its mean position is measured by its amplitude, which in the graph equals 6 cm. The wavelength is 1.20 nm, and the frequency is 1.67 hz.
A periodic wave's wavelength, or the distance over which the wave's shape repeats, is its spatial period. It is the separation between adjacent spots on a wave that correspond to the same phase. Displacement refers to the idea that something has moved or been shifted. The term "displacement" refers to a shift in an object's position. The following equation serves as a mathematical definition of it: is used to describe the final position's value.
f = 1/T f = 1/0.6 f = 1.67 mHz is the frequency.
Wavelength and frequency are combined to form the wave's speed.
v = f (lamda) lamda = v/f
lamda = v/f
lamda = 2/1.67
lamda = 1.20m
Learn more about wavelength:
brainly.com/question/13533093
#SPJ4
find the ratio of the centripetal acceleration at the end of the blade to that which exists at a point located 3.0 m from the center of the circle.
A helicopter's huge blade is turning in a horizontal arc. From the blade's tip to the middle of the circle, it is 6.7 meters long. find the centripetal acceleration ratio
How does acceleration function? What is it?
Any procedure where the velocity varies is referred to as acceleration. There are just two ways to accelerate: changing your speed or changing your direction, or changing both. This is because velocity is both a speed as well as a direction.
What does typical acceleration mean?
typical acceleration The overall change in velocity during the specified interval multiplied by the total amount of time required for the change is the definition of mean acceleration over a particular period of time. It lasts for a specific amount of time.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ4
DJ wants to install a zipline between two trees. The zipline will be strung between the trees at points 32 feet and 4 feet high. Suppose the trees are 52 feet apart. Which sketch models this situation to find the length of the zipline if the zipline is x feet
The zipline is 59.06 feet long; it would be x feet long if it were a different length. DJ wants to set up a zipline in the space between two trees.
How are lengths determined?Length can be measured in a variety of ways, including handspan, foot span, meters, inches, and millimeters. Standard units of measuring length and non-standard units of measuring length are the two categories into which the units of measuring length can be divided. Look at the table below that displays length units.
What length is there?A segment's or a room's dimensions are examples of things that can be measured in terms of length. Distance is the separation between two things, like two cities or two points.
Length=√a²+b²
Length=√28²+52²
Length=√784+2,704
Length=√3,488
Length=59.06ft
To know more about length visit:
https://brainly.com/question/8552546
#SPJ4
Does the displacement of an object depend on the specific location of the origin of the coordinate system
Nope, your reference point can be anywhere because displacement is simply the change in position. So regardless of where your origin is, the change in position (displacement) is independent.
What is an example of a displacement?Alteration in an object's location in relation to a reference frame is known as displacement. For instance, a billiards ball travels from one spot to another as a player strikes it. It is alleged to have moved. A vector quantity with the both magnitude and direction is displacement.
Are displacement and distance the same thing?Sometimes people mistakenly believe that length and displacement are simply two different labels for the same thing. Displacement and distance, however, are two distinct ideas. The total distance covered is larger than movement between those two places if an item changes direction while traveling.
To know more about Displacement visit:
https://brainly.com/question/11934397
#SPJ4
studies show that in collisions where vehicle occupants who were totally ejected from the vehicle they were less likely to be killed. true false
False. According to studies, those who are completely ejected from a car during an accident are more likely to die than people who stay within the car.
What does a collision mean?When two or more things come into touch with one another and are impacted by one another, a collision occurs. This can happen in a multitude of contexts, such as on the roads when cars meet, in space when objects collide, or even during sports like soccer or hockey. The physical act of two particles coming into contact and reacting with one another, for instance in physics or chemistry, is sometimes referred to as a collision. Car crashes may cause damage to the vehicles as well as injuries or fatalities to the people. To reduce the incidence of accidents on the road, it is essential to prevent collisions through safe driving habits and traffic laws.
To know more about collision visit
https://brainly.com/question/29013438
#SPJ4
8. A bullet (mass=m) is fired at speed v into a block of mass M (with M> m) which is hanging
vertically from a light string of length L. The bullet is embedded in the block. If the recoiling
block-bullet system reaches a height of 2/3L, then the initial speed of the bullet is most nearly
a
Mx (1gL/3)1/2/m
b Mx (2gL/3)¹/2/m
C. Mx (3gL/4)¹/2/m
d. Mx (4gL/3)¹/2/m
Answer: A bullet (mass=m) is fired at speed v into a block of mass M (with M> m) which is hanging vertically from a light string of length L. The bullet is embedded in the block. If the recoiling block-bullet system reaches a height of 2/3L, then the initial speed of the bullet is most nearly
B. Mx (2gL/3)¹/2/m
Explanation:
When a bullet (mass=m) is fired at speed v into a block of mass M (with M> m) which is hanging vertically from a light string of length L, the bullet is embedded in the block. The bullet and block form a new system with a total mass of M+m and the system moves upward due to the kinetic energy imparted by the bullet.
Conservation of energy principle states that the initial kinetic energy of the bullet is equal to the final potential energy of the bullet-block system. The potential energy of the system is given by mgh, where h is the height to which the system rises.
Therefore, the initial kinetic energy of the bullet is given by:
1/2mv² = mgh
We know that h = 2/3L and g is the acceleration due to gravity. We can substitute these values into the above equation and solve for the initial speed of the bullet
v² = 2gmh/m = 2gh/m = 2g(2/3L) / m = 4gL/3m
v = (2gL/3m)^1/2 * m
v = M * (2gL/3)^1/2 / m
Therefore the initial speed of the bullet is most nearly Mx (2gL/3)¹/2/m
Summary, when a bullet (mass=m) is fired at speed v into a block of mass M (with M> m) which is hanging vertically from a light string of length L, the bullet is embedded in the block and the block and bullet form a new system. The initial kinetic energy of the bullet is equal to the final potential energy of the bullet-block system. The potential energy is given by mgh, where h is the height to which the system rises, h = 2/3L. Solving the equation gives the initial speed of the bullet is most nearly Mx (2gL/3)¹/2/m.
To learn more about Energy Principle:
https://brainly.com/question/10063455
Oil with a density of 842kg/m3842kg/m3 is flowing smoothly through a pipe, as shown. In the lower portion, the oil is flowing at v1=2.04m/sv1=2.04m/s, and the pressure gauge indicates P1=232kPaP1=232kPa. In the upper portion of the pipe, oil is flowing at v2=3.26m/sv2=3.26m/s at a height that is 12.28m12.28m above the lower portion.
What is the pressure reading, in kilopascals, on the gauge on the upper portion of the pipe?
The pressure reading on the upper portion of the pipe can be determined by using Bernoulli's equation. Bernoulli's equation relates the pressure, velocity, and height of a fluid in a steady state and incompressible flow.
The Bernoulli's equation states that:
P1 + 1/2ρv1^2 + ρgh1 = P2 + 1/2ρv2^2 + ρgh2
Where:
P1 = pressure at point 1 (232 kPa)
v1 = velocity at point 1 (2.04 m/s)
h1 = height at point 1 (0 m)
P2 = pressure at point 2 (unknown)
v2 = velocity at point 2 (3.26 m/s)
h2 = height at point 2 (12.28 m)
ρ = density of the fluid (842 kg/m3)
g = acceleration due to gravity (9.81 m/s^2)
We can plug in the given values and solve for P2:
P2 = P1 + 1/2ρv1^2 + ρgh1 - 1/2ρv2^2 - ρgh2
P2 = 232 + 1/28422.04^2 + 8429.810 - 1/28423.26^2 - 8429.8112.28
P2 = 232 + 8424.16 + 0 - 84210.66 - 10,205.9
P2 = -9,973.7 Pa
Therefore, the pressure reading on the upper portion of the pipe is -9,973.7 Pa which is approximately -99.74 kPa.
Learn more about Bernoulli's equation here: https://brainly.com/question/13093946
#SPJ4
determine the reactions at the supports A and B for equilibrium of the beama. 200 N/m 4mb. 400N/m 3m
According to the question, 50 kN reactions at the supports A and B for equilibrium of the beama.
What is a physical example of equilibrium?When we move a body a tiny distance, the state creates forces that usually oppose the movement and bring the body back to its equilibrium, we say that the body is in stable equilibrium. Think of a stone at the base of a bowl as an illustration.
Since the laden beam is stationary, we should equalize each other out by moving upward and downward.
Thus,
= R+R
=40+60=100 kN - (1)
Now that the beam's force has been evenly distributed across the two supports, the reaction force exerted by the two supports will also be equally, or R=R.
2R=100 kN
R=50 kN
As a result, the reaction at supports A and B will each be 50 kN.
To learn more about equilibrium visit:
https://brainly.com/question/28518658
#SPJ4
a body collides with an identical body that is initially at rest. after the collision, they stick together. what is the percentage of kinetic energy that has been transferred to other forms of energy in the collision?
In a perfectly inelastic collision, where the two bodies stick together after the collision, the percentage of kinetic energy transferred to other forms of energy is 100%.
How does the mass and velocity of the colliding bodies affect the amount of kinetic energy transferred to other forms of energy?The mass and velocity of the colliding bodies have a direct relationship with the amount of kinetic energy transferred to other forms of energy. A higher mass will result in a larger amount of kinetic energy being transferred, as more force is required to bring the two bodies to a stop. Similarly, a higher velocity will result in a greater amount of kinetic energy being transferred, as the bodies have more kinetic energy to lose during the collision. Both mass and velocity contribute to the total kinetic energy of the colliding bodies and therefore the amount of kinetic energy that will be transferred to other forms of energy in the collision.
To know more about Collision visit:
https://brainly.com/question/29483649
#SPJ4
A car is moving on a straight road at 5m/s. it is accelerated at 3m/s. what will be its velocity after 4 seconds?
Answer:
17m/s
Explanation:
v=u+at
v=5+3*4
v=17m/s
A 60-cm-long heating wire is connected to a 120 V outlet. If the wire dissipates 45 W, what are (a) the current in and (b) the resistance of the wire?
There is a 240-volt outlet attached to a heating wire that is 60 cm long. What are the effects if the cable emits 45 W We calculate the voltage with in line I =U n = 45W/120V = 0.38A using P=45 W as well as V=120 V.
What does the word disperse mean?Verb intransitive: to disperse and disappear. The sun emerged as the clouds disappeared. The team's initial momentum has faded. : to indulgently or dissolutely pursue pleasure
Calculation
The power dissipated in the wire is
P = I2R = IV
where I is the current and V the voltage.
Using P=45 W and V=120 V, we find the value of the current in the wire:
I =P/V = 45W/120V = 0.38A
To know more about dissipate visit:
https://brainly.com/question/9411474
#SPJ4
A capacitance C and an inductance L are operated at the same angular frequency. A) At what angular frequency will they have the same reactance? Express your answer in terms of the variables C and L B)If L = 5.30 mH and C = 3.90 μF , what is the numerical value of the angular frequency in part A? C) What is the reactance of each element?
A) The angular frequency at which they will have the same reactance is equal to 1/√(LC).B) The numerical value of the angular frequency in part A is 8.51 x 10^6 rad/s.C) The reactance of each element is equal to 1/√(LC), which is equal to 5.91 kΩ.
What is the numerical ?
Numerical refers to a quantity that is expressed or represented by a number. It is a numerical value that can be used in mathematical equations and calculations. Numerical can also refer to a type of data that consists of numbers or numerical values, such as dates, times, measurements, or financial data.Numerical is a term used to describe data that is expressed in numerical form, such as numbers or numerical values. This type of data is used to make calculations and accuracy is important in order to make reliable predictions and decisions.
To learn more about numerical
https://brainly.com/question/24468862
#SPJ4
How much work can a motor with a power output of 31 W do in 8 s? Report your answer to the nearest whole number.
The quantity of energy transferred or transformed per unit of time is known as power.
What is Power?The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.
Power is related to other factors; for instance, the power required to move a ground vehicle is equal to the product of the vehicle's velocity, traction force on its wheels, and aerodynamic drag.
A motor's output power is calculated by multiplying its torque output by the angular velocity of its output shaft.
Therefore, The quantity of energy transferred or transformed per unit of time is known as power.
To learn more about power, refer to the link:
https://brainly.com/question/29575208
#SPJ1
NASA's space shuttle program in Florida will end in 2011. Which of these would be the most likely outcome of this event on the locations near the space center?
increase in number of restaurants and decrease in unemployment
increase in tourism and decrease in use of space technologies in homes
increase in unemployment and decrease in profit made by local businesses
increase in profit made by construction companies and decrease in use of space technologies in homes
NASA's space shuttle program in Florida will end in 2011. Increase in tourism and decrease in use of space technologies in homes would be the most likely outcome of this event on the locations near the space center.
What is NASA?
The U.S. federal government's autonomous National Aeronautics and Space Administration (NASA) is in charge of the civil space programme, as well as space and aeronautics research.
NASA was created in 1958 to provide the American space development effort a distinctly civilian orientation, stressing peaceful applications in space science. It succeeded the National Advisory Committee for Aeronautics (NACA).
Learn more about NASA here:
https://brainly.com/question/20763143
#SPJ1
Which type of radioactive decay would produce a decay particle that would move along path A?
Which type of radioactive decay would produce a decay particle that would move along path A?
? decay
?+ decay
?? decay
? decay
The type of decay cannot be determined.
SubmitHintsMy AnswersGive UpReview Part
A β decay particle would be created and would travel along path A.
A beta ray is released from an atomic nucleus during a radioactive decay process known as beta decay. The proton in the nucleus changes from a proton to a neutron during beta decay, and vice versa. The process of a proton into a neutron is called β+ decay. Similar to this, neutron to proton conversion is referred to as β- decay. Three common emissions come from radioactive decay that occurs naturally. When these emissions were first discovered, scientists couldn't tell them apart from other, well-known particles, so they gave them the names alpha particles, beta particles, and gamma rays. The first three letters of the Greek alphabet were used to name these particles.
Learn more about β- Decay
https://brainly.com/question/23642823
#SPJ4
a 1.50-kg object is held 1.20 m above a relaxed mass- less, vertical spring with a force constant of 320 n/m. the object is dropped onto the spring. (a) how far does the object compress the spring? (b) what if? repeat part (a), but this time assume a constant air-resistance force of 0.700 n acts on the object during its motion. (c) what if? how far does the object compress the spring if the same experiment is performed on the moon, where g 5 1.63 m/s 2 and air resistance is neglected?
When a spring is distorted by an outside force agent, energy is stored within the spring. The work done and then employed to distort the spring constitutes the spring energy. Its deformation length squared determines how much energy a spring has.
Who or what represents spring energy?It is the energy held within a compressible or elastic substance, such as a spring, rubber band, or molecule. It also goes by the name elastic potential energy. It is determined by multiplying the movement's force by its distance. Without stretching, or in the typical position, the spring has no energy.
Which kind of energy does spring contain?Mechanical energy is the energy held under tension within objects. Rubber bands that have been stretched and compressed are two instances of mechanical energy storage.
To know more about spring energy visit:
https://brainly.com/question/12528339
#SPJ4
A satellite follows the elliptical orbit shown. The only force on the satellite is the gravitational attraction of the planet. The satellite's speed at point a is
At the planet's centre, a satellite won't experience any torque. The spacecraft is moving at a speed of 8000 metres per second.
What is the name for a planet's gravitational pull?Weight refers to the gravitational pull of the earth on an object. Additionally, it is equal to the ratio of the object's mass to its gravitational acceleration.
Do satellites have elliptical orbits?Satellites circle their planets in elliptical patterns. The elliptical orbit lengthens if a satellite's speed is suddenly increased. A satellite's course is a parabola or a hyperbola if it has enough velocity to leave and never come back to the planet.
Learn more about satellite here:
brainly.com/question/29267553
#SPJ4
