Answer: The answer Option is A.
Explanation: Both the Ions have the electronic configuration 2,8,8
The electronic configuration of an ion is 2.8.8. This ion is S²⁻.
What is an electronic configuration ?The term electronic configuration is defined as the arrangement of electrons in orbitals around an atomic nucleus.There are four different types of orbitals (s,p,d, and f) have different shapes, and one orbital can contain a maximum of two electrons.
The symbols used for writing the electron configuration start with the shell number (n) and then the type of orbital and finally the superscript represent how many electrons are present in the orbital.
The electronic configuration of an ion is 2.8.8. This ion is S²⁻. Because S²⁻ contain electronic configuration of an ion is 2.8.8 while electronic configuration of S is 2, 8, 6.
Thus, The electronic configuration of an ion is 2.8.8. This ion is S²⁻.
To learn more about an electronic configuration, follow the link;
https://brainly.com/question/14283892
#SPJ2
A+wooden+boat+discovered+just+south+of+the+great+pyramid+in+egypt+has+a+carbon-14/carbon-12+ratio+that+is+72.0++%++of+that+found+in+living+organisms.+how+old+is+the+boat?++++++++
The approximate age of the boat by radiocarbon dating is 2660 years.
Radiocarbon dating, often known as carbon-14 dating, is a technique for determining an age that relies on radiocarbon's reduction to nitrogen. Neutrons combine with nitrogen-14 in the Earth's atmosphere to form carbon-14, which is a process that occurs frequently in nature. The neutrons needed for this reaction are created when cosmic rays impact the atmosphere.
The radiocarbon found in atmospheric carbon dioxide molecules enters the biological carbon cycle when green plants take it in from the air and then pass it on to animals through the food chain. A living thing's radiocarbon steadily deteriorates, and as long as it consumes food or air, the lost radiocarbon is constantly replaced. However, as an organism passes away, it can no longer take in carbon-14, therefore the amount of radiocarbon in its tissues steadily decreases.
To learn more about radiocarbon dating please visit-
https://brainly.com/question/12693872
#SPJ4
Choose the terms that correctly complete the paragraph.
Mr. Tracy drove to the nursery to buy plants for his garden. His trip involved several examples of chemical energy. The chemical energy contained in {Blank} changed into energy to run the car. The plants store chemical energy produced during {Blank} . Mr. Tracy had the energy to pick up the plants and carry them to the car because of the chemical energy stored in {Blank} .
The chemical energy contained in gas changed into energy to run the car. The plants store chemical energy produced during photosynthesis. Mr. Tracy had the energy to pick up the plants and carry them to the car because of the chemical energy stored in foods.
Energy conversion in systemsMr. Tracy drove to the nursery to buy plants for his garden. While driving, the chemical energy stored in the gas present in the gas tank in his car is burned to produce energy that drives the engine of the car.
The plants that Mr. Tracy was going to buy store chemical energy through the production of carbohydrates via the process of photosynthesis. Mr. Tracy had the energy to pick up the plants and carry them to the car because of the energy stored in foods.
The foods are oxidized during respiration to unlock the energy and convert them to usable energy by the body, usally in the form of ATP. Respiration involves series of steps, including the conversion of glucose to pyruvate molecules and the conversion of the pyruvates to carbon dioxide and water.
More on energy conversion can be found here: https://brainly.com/question/12503064
#SPJ1
Does a reaction occur when aqueous solutions of manganese(ii) sulfate and chromium(ii) nitrate are combined?
manganese(ii) sulfate and chromium(ii) nitrate precipitation reaction takes place.
Manganese(II) sulfate MnSO₄ and chromium nitrate Cr(NO₃)₂ are both water-soluble ionic compounds. When mixed in solution, the following constituent ions are formed:
Mn2+, Cr2+ NO
Possessing relatively good water solubility, manganese(II) nitrate remains dissolved in solution. . However, calcium sulfate is insoluble and common to most ionic compounds that bind Group 2A metal cations and sulfate anions. Therefore, a precipitation reaction takes place. The balanced molecular reaction equation is:
MnSO₄(aq) + Cr(NO₃)₂(aq) → CrSO₄
The ionic formula describes all strong electrolyte species in terms of fully dissociated ionic components.
Mn2+(aq) + SO2(aq) + Cr₂+(aq) + 2N
The net ion equation excludes manganese (II) and nitrate spectator ions.
Dissolution completely dissociates both reactant compounds into their constituent ions, allowing these ions to pair to form two new ionic compound products. A key feature is that one of these products is relatively insoluble in water, which can usually be predicted without calculation. The net ion equation for the precipitation reaction system focuses on the formation of this solid insoluble product so that all spectator ions are removed.
Learn more about double displacement reaction here https://brainly.com/question/23918356
#SPJ4
F this car's gas tank holds 45 l , how many tanks of gas will you use to drive 1600 km ?
1.52 tanks of gas will be used to drive 1600 km.
A certain fuel-efficient hybrid car gets gasoline mileage of 55.0 mpg (miles per gallon).
A gallon is a unit of volume in both the US customary and imperial systems of measurement. The US gallon is defined as 231 cubic inches (3.785 liters).
1 mpg = 0.425143707 km/l; to convert miles per gallon to kilometers per liter .
mileage = 23.38 km/l
volume = 1600 km ÷ 23.38 km/l
volume = 68.43 liters; the amount of gasoline needed the trip
tanks = 68.43 l ÷ 45 l
tanks = 1.52
More about units change: brainly.com/question/26715286
#SPJ4
A calorimeter initially contains 165.0 ml of water at 21.3oc. when 2.72 g k is added to the water, the temperature of the resulting solution rises to a maximum of 47.8oc. the reaction that occurs is:________
The reaction that occurs is:
2K (s)+H2O (l)→2KOH (aq)+H2 (g)
What is the Principle of Calorimeter?Two different types of matter—ideally a liquid and a solid—are in touch with one another in a calorimeter. Both bodies also have different temperatures. This configuration allows heat energy to move from an object with a higher temperature to an object with a lower temperature. Heat transfer does not stop, nevertheless, until there is a state of thermal equilibrium between the bodies. The "rule of conservation of energy," which is represented by the principle of calorimetry, states that the total amount of heat absorbed by the cold object and the total amount of heat released by the hot object are equal.To learn more about Calorimeter refer to:
https://brainly.com/question/4802333
#SPJ4
A 6 kg box is pushed across the floor with a force of 72N. Calculate the acceleration of the object.
The acceleration of the object is 12 m/s².
What is Acceleration?The rate at which velocity changes over time in terms of both speed and direction is known as acceleration. An object is considered to have been accelerated if its velocity changes. Depending on whether an object is moving faster, slower, or in a different direction, its velocity may change. Acceleration is a vector quantity since it has both a magnitude and a direction.The SI unit of acceleration is m/s².Given:
Force = 72N
Mass = 6 kg
To calculate acceleration apply the formula,
Acceleration = Force/mass
= 72N / 6kg
= 12 m/s²
Therefore, the acceleration of the object is 12 m/s².
To learn more about acceleration visit:
https://brainly.com/question/12550364
#SPJ9
Okkkkk I will give you 100 points and a brainliest if you please answer this question soon
Apply Graph mass versus volume for the data given
in the table. What is the slope of the line?
Answer:
y= .31120332x
How can blast help you identify the active site of your poi? make sure to include 2 advantages and 2 disadvantages of the program
Biochemical sequences that are similar to one another are found via BLAST. The application calculates the statistical significance by comparing nucleotide or protein sequences to sequence databases.
The Basic Local Alignment Search Tool (BLAST) identifies areas where sequences are locally similar. The software computes the statistical importance of matches between nucleotide or protein sequences and sequence databases.Advantages
1) Creating phylogeny
Using the BLAST web page, you can build a phylogenetic tree using the findings from the program. Only "first pass" phylogenetic analyses should use phylogenies based solely on BLAST as they are less reliable than other purpose-built computational phylogenetic methods.2) DNA analysis
BLAST can compare the chromosomal site of an interest sequence to pertinent sequences in the database while working with a known species and trying to sequence a gene at an unknown location (s). For this purpose, NCBI has a "Magic-BLAST" program based on BLAST.Disadvantages
1) You require repeatable, unbiased outcomes.
Because NCBI BLAST is a heuristic algorithm and uses a complex statistical model to determine whether a match is significant or not, it does not disclose all alignments it discovers. This choice is made based on the length of the alignment and the size of the database; if the database expands, it's possible that earlier findings will no longer be valid.2) Finding small sequences can be challenging
NCBI BLAST makes it more difficult by using algorithm shortcuts. The most crucial aspect of this heuristic is its word size parameter, which demands a continuous interval of three similar amino acids or eleven identical nucleotides before even attempting to align two sequences. Because of this, it is not the best option for finding brief sequences.In addition to assisting in the identification of gene family members, BLAST can be used to infer functional and evolutionary links between sequences.
Learn more about Nucleotide sequences here
https://brainly.com/question/1569358
#SPJ4
why does oil not dissolve in water?
Answer:
the oil won't disolve in water because the oils resistance keeps it from not deforming
Answer:
Water and oil are incompatible. They are said to be inseparable. This is because water is a polar molecule, which means it has a positive charge on one end and a negative charge on the other.
Explanation:
Three samples of sodium chloride are analyzed and found to contain differing percent by mass of chlorine. what does this information alone, tell us about the three samples?
Three samples of sodium chloride are analyzed and found to contain differing percent by mass of chlorine this indicates that only one solution has actual content of chlorine.
There may be differential volume of chlorine in sodium chloride solution in Nacl the mass percent of chlorine should be 60.8%.
With respect to 1 mole sodium chloride,
Mass of sodium in sodium chloride =23 g
Mass of chloride in sodium chloride =35.5 g
Total mass of sodium chloride =58.5 g
% of chlorine in NaCl =
58.5/35.5×100 = 60.85
To learn more about sodium chloride:
https://brainly.com/question/9811771
#SPJ4
An ion has a mass number of 65, 36 neutrons, and a charge of 1 . identify the element symbol, and determine the number of protons and electrons in this ion.
The ion with a mass number of 65, with 36 neutrons and a charge of +1 is Copper (Cu). It has 29 protons and 28 electrons.
An ion is a charged particle formed when an atom loses or gains electrons. When electrons are lost, a negatively charged anion is formed, electrons are gained. a positively charged cation is formed.
The ion in the question has a mass number of 65. This means that the total number of protons and neutrons is 65. To get the number of protons, we subtract the number of neutrons from the mass number. That will give us 29 protons.
From the number of protons, we can identify the element symbol. The number of protons equal to the atomic number. Hence, the ion has an atomic number of 29. On the periodic table, the element with an atomic number of 29 is Copper (Cu). It also has a charge of +1, meaning that it has given out one electron. Therefore, it will have 28 electrons instead of 29.
Learn more about ions here:
https://brainly.com/question/14644819
#SPJ4
Differentiate between element, compound and mixture
The Cullinan diamond, the largest diamond ever found, had an uncut volume of 177 mL. If 1 mL
of diamond has a mass of 3.51 g and 1 carat= 0.200 g, how many carats was the Cullinan
diamond?
If 1 mL of diamond has a mass of 3.51 g and 1 carat = 0.200 g, cullinan diamond is of 2795.7 carats.
The atoms of diamond are grouped in a crystal structure known as diamond cubic, and it is a solid form of the element carbon.The Imperial State Crown, which is used at British monarchs' coronations, was set with Cullinan II, the 2nd biggest stone and the 317-carat Second Star of Africa.The weight of diamonds and other valuable stones is measured in carats. There are 0.2 grams in it.Given,
Volume of uncut diamond is 177mL
1mL = 3.51 gram
and 1 carat = 0.200 gram
then we have to find out weight of cullinan diamond in carats.
Cullinan diamond is of 177mL volume that means
177 × 3.51 = 621.27 grams
If 1 carat = 0.200grams
then 1 gram = 4.5 carats
621.27 grams = 621.27 × 4.5 = 2795.7 carats
Hence, cullinan diamond is of 2795.7 carats.
Learn more about Volume here:
https://brainly.in/question/609711
#SPJ9
Define the term buffering region and describe how you could locate the buffering region on a titration curve.
A weak acid and its conjugate base are typically present in a buffer solution. When H+ is added to a buffer, the conjugate base of the weak acid accepts a proton (H+), “absorbing” the H+ before the pH of the solution drops significantly. The buffering region is approximately 1 pH unit on either side of the conjugate acid’s pKa. The buffering region’s midpoint occurs when one-half of the acid reacts to dissociation
A titration curve graphically depicts buffer capacity. The middle of the curve is flat because the addition of base or acid has little effect on the pH of the solution. This is known as the buffer zone. When a small amount of acid or base is added to the buffer system.
This portion of the titration curve corresponds to the buffer region: it exhibits the smallest change in pH per increment of an added strong base.
The acid-base properties of the solution are dominated by the equilibrium for dissociation of the weak acid, corresponding to Ka, in the region of the titration curve at the lower left, before the midpoint. The acid-base properties of the solution are dominated by the equilibrium for the reaction of the conjugate base of the weak acid with water, corresponding to Kb, in the region of the titration curve at the upper right, after the midpoint. However, because Ka and Kb are related by Kw, we can calculate one from the other.
For more information on buffer region click on the link below:
https://brainly.com/question/24188850
#SPJ4
Determine the density of a liquid if a 35.2 mL sample has a mass of 28.548 g.
The density of the liquid is 0.79.
Density can be determined by the ratio of mass and volume of a particular substance. It can be denoted by the symbol d. The concept of density is crucial because it enables us to predict which compounds will float and which ones will sink in a liquid. As long as an object's density is lower than that of the liquid's density, it will often float.
Density can be determined by the formula:
Density = mass / volume.
Given data:
Volume = 35.20mL
Mass = 28.54 g
Put the values of given data in above formula:
Density = 28.20 / 35.54
Density = 0.79 m³
Therefore, the density of the liquid will be 0.79.
To know more about density.
https://brainly.com/question/13289733
#SPJ1
The density of a liquid if a 35.2 mL sample has a mass of 28.548 g is 0.811 g/mL.
What is density?
Density is defined as the mass of the substance per unit of volume. It can be understood by the mass of a substance divided by its volume. Density is denoted using symbol ρ. Density of a liquid can be calculated by -
ρ = m
v
where,
ρ = density
m = mass
v = volume
Density is a physical property of a matter. Higher the density of a substance, higher will be its mass and volume. As long as an object's density is lower than that of the liquid's density, it will often float.
To calculate density of given liquid -
we have,
mass = 28.548 g
volume = 35.2 mL
Using the formula,
Density = mass
volume
ρ = 28.548
35.2
ρ = 0.811 g/mL
Therefore, density of liquid is 0.811 g/mL or m³
To learn more about density,
brainly.com/question/13289733
#SPJ1
Calculate the ph of a mixture of 0.25 m acetic acid (ch3cooh) and 0.1 m sodium acetate (ch3coo- na ) in a total volume of 1 l. the pka of acetic acid is 4.76.
The pH of a mixture of 0.25 m acetic acid (CH3COOH) and 0.1 m sodium acetate (CH3COO- Na ) in a total volume of 1 l is 4.37.
The above situation represents a case of buffer solution.
Buffer solutions are those solutions that can resist change in their pH if any acid or base is added to them.
To calculate the pH of a buffer solution, the Henderson-Hasselbalch equation is used
pH = pKa + log [Salt]/[Acid]
Putting
pKa = 4.76
[Salt] = Concentration of sodium acetate = 0.1 M
[Acid] = Concentration of acetic acid = 0.25 M
pH = 4.76 + log [0.1]/[0.25]
pH = 4.76 + log[0.4]
pH = 4.76 - 0.39
pH = 4.37
Hence, the pH of a mixture of 0.25 m acetic acid (ch3cooh) and 0.1 m sodium acetate (ch3coo- na ) in a total volume of 1 l is 4.37.
To know more about "buffer solution", refer to the link given below:
https://brainly.com/question/24262133?referrer=searchResults
#SPJ4
12)
Solve the question above:
How many ounces does an 8-ton elephant weigh?
weight of an 8-ton elephant in ounces = ? ounces
Ounces does an 8 - ton elephant in weight is 256000 ounces.
In the question the values are given as :
number of elephant = 8 ton
ton is measure of weight, and ounce is also a unit of weight.
1 ton = 2000 pounds
1 pound = 16 ounces
1 ton = 32000 ounces
the question is to convert 8 ton into ounces,
to convert 8 ton into ounces , we have
1 ton = 32000 ounces
so , in 8 ton ,we have :
8 ton = 8 × 32000 ounces
= 256000 ounces.
therefore, 8 ton = 256000 ounces.
Thus , Ounces does an 8 - ton elephant in weight is 256000 ounces.
To learn more about weight conversion here
https://brainly.com/question/15645895
#SPJ1
What sets noble gases apart from other groups on the periodic table?
Answer:
Noble gases are the least reactive of all elements. That's because they have eight valence electrons, which fill their outer energy level. This is the most stable arrangement of electrons, so noble gases rarely react with other elements and form compounds.
An aluminum beverage can contains 12.0 fluid ounces of liquid. What is this volume in liters? (1 fl oz=29.6ml).
The volume of 12-ounce fluid in an aluminum beverage is equal to 0.3552 liters.
We know that a fluid ounce is equal to 29.6 m and 1000 ml is equal to 1 liter in the metric system of units.
Converting 12 fluid ounces into milliliter(ml) by the unitary method:
1 fl ounce = 29.6 ml
1×12 fl ounce = 29.6×12 ml
12 fl ounce= 355.2 ml
Now converting 355.2 milliliters (ml) into Liter by the unitary method:
1000 ml= 1 L
1 ml= 0.001 L
1×355.2 ml= 0.001×355.2 L
355.2 ml= 0.3552 L
Therefore 12 fluid ounces of beverage is equal to 0.3552 Liters in volume.
LEARN MORE ABOUT UNIT CONVERSION HERE: https://brainly.com/question/141163
#SPJ4
What is the identity of a 100. 0 g sample of metal that, upon absorbing 4680 j of heat, increases in temperature by 52. 0 °c?.
Aluminum is a metal whose temperature rises by 52.0 °C when it absorbs 4680 J of heat in a 100 g sample. It has low density, non-toxicity, high thermal conductivity, good corrosion resistance.
The unknown metal has a mass (m) of 100.g and absorbs 4680 J of heat (Q) resulting in a temperature rise of 52.0 °C (ΔT).
It has low density, non-toxicity, high thermal conductivity, good corrosion resistance, and can be quickly cast, machined, and formed. Non-magnetic and non-flammable. It is the second most malleable metal and the sixth most malleable metal.
Aluminum is a metal with a specific heat capacity of 0.900 J/g.°C.
Specific heat, the amount of heat required to raise 1 gram of a substance by 1 degree Celsius. The units for specific heat are usually calories or joules/grams/Celsius.
Learn more about Specific heat capacity here https://brainly.com/question/27991746
#SPJ4
A compound consists of three times as many moles of chlorine as unknown metal m. Metal m contains 23 electrons and 31 neutrons when it forms this compound. What is the mass number of m?.
Answer:
57
Explanation:
An atom has a mass of 44 and 21 electrons. Fill in the chart given this information.
Assuming that the atom has a neutral charge:
The number of protons is equal to the number of electrons.
The number of neutrons is the mass subtracted by the number of protons.
The atomic number is the same as the number of protons.
Answer:
Protons = 21
Neutrons = 23
Atomic # = 21
How many electrons are in mystery atom Y?
Answer:Diagram of the nuclear composition and electron configuration of an atom of yttrium-89 (atomic number: 39), the most common isotope of this element. The nucleus consists of 39 protons (red) and 50 neutrons (blue). 39 electrons (green) bind to the nucleus, successively occupying available electron shells (rings).
Explanation:Need brainliest award
Answer:
Explanation:
39
Using standard reduction potentials from the aleks data tab, calculate the standard reaction free energy for the following redox reaction. 3fe2 cro42- 4h20
The standard Gibbs free energy for the given redox reaction is -106kJ/mol.
What is the standard Gibbs free energy?
The standard Gibbs free energy (ΔG°) is a thermodynamic potential that can be used to calculate the maximum reversible work that may be performed by a thermodynamic system under standard conditions.
To find the Gibbs free energy, first we have to know about the redox reaction,
10 Cl⁻(aq) + 2 MnO₄⁻(aq) + 16 H⁺(aq) ⇒ 5 Cl₂(g) + 2 Mn²⁺(aq) + 8 H₂O(l)
As we have to analyze the standard reduction potentials (E°red).
Cathode: 2 MnO₄⁻ + 16 H⁺ + 10 e⁻ ⇒ 2 Mn²⁺ + 8 H₂O
E°red = 1.51 V
Anode: 10 Cl⁻ ⇒ 5 Cl₂ + 10 e⁻
E°red = 1.40 V
Then, the potential difference between the cathode and anode is called the standard cell potential.
E°cell = E°red, cathode - E°red, anode
= 1.51 V - 1.40 V
= 0.11 V
The standard cell potential is 0.11 V.
The Gibbs free energy can be calculated as,
ΔG° = - n × F × E°cell
ΔG° = - 10 mol × (96,485 J/V.mol) × 0.11 V × (1 kJ/1000 J)
= -106 kJ/mol
where,
n - moles of electrons exchanged.
F -Faraday's constant.
The standard Gibbs free energy for the given redox reaction is -106kJ/mol.
Learn more about Standard Gibbs free energy, https://brainly.com/question/9238751
#SPJ4
A 35.00 gram sample of a substance containing only Carbon, Hydrogen and Oxygen was combusted. The products of this combustion reaction were shown to be 51.29 grams of CO2 and 20.99 grams of H2O. Determine the empirical formula of the original compound given this combustion analysis data.
The empirical formula of the original compound given the combustion analysis data is CH₂O
How to determine the mass of Carbon Mass of CO₂ = 51.29 gMolar mass of CO₂ = 44 g/mol Molar of C = 12 g/mol Mass of C =?Mass of C = (12 / 44) × 51.29
Mass of C = 13.99 g
How to determine the mass of HMass of H₂O = 20.99 gMolar mass of H₂O = 18 g/mol Molar of H = 2 × 1 = 2 g/mol Mass of H =?Mass of H = (2 / 18) × 20.99
Mass of H = 2.33 g
How to determine the mass of OMass of compound = 35 gMass of C = 13.99 gMass of H = 2.33 gMass of O =?Mass of O = (mass of compound) – (mass of C + mass of H)
Mass of O = 35 – (13.99 + 2.33)
Mass of O = 18.68 g
How to determine the empirical formula C = 13.99 gH = 2.33 gO = 18.68 gEmpirical formula =?Divide by their molar mass
C = 13.99 / 12 = 1.1658
H = 2.33 / 1 = 2.33
O = 18.68 / 16 = 1.1675
Divide by the smallest
C = 1.1658 / 1.1658 = 1
H = 2.33 / 1.1658 = 2
O = 1.1675 / 1.1658 = 1
Thus, the empirical formula of the compound is CH₂O
Learn more about empirical formula:
https://brainly.com/question/9459553
#SPJ1
The element iodine appears in
Period 5 of the Periodic Table. This
means that an iodine atom has-
A five electrons in its outer orbital
B five orbitals in its electron cloud
C an atomic mass greater than four
D five protons and five neutrons in its nucleus
The element iodine appears in Period 5 of the Periodic Table. This means that an iodine atom has five orbitals in its electron cloud. so the correct option is (b).
As a member of group 7, iodine possesses seven outer electrons. Since it is in the fifth period, its electrons will be in orbitals 5s and 5p. The chemical formula for iodine is 5s25px25py25pz1.
What does iodine's orbital notation mean?total amount of electrons that could occupy each orbital
Again using iodine as an example, we can observe on the periodic table that it has an atomic number of 53. ( In neutral state it contains 53 electrons). The configuration of the entire electron cloud is 1s22s22p63s23p64s23d104p65s24d105p5.
Facts about Iodine:Iodine is a trace element that can be found as a dietary supplement, as well as naturally in some foods and some forms of salt. Iodine is a necessary component of the thyroid hormones triiodothyronine (T3) and thyroxine (T4) (T3).
To know more about Iodine, visit:
https://brainly.com/question/6773013
#SPJ9
When compounding a sterile product, you should keep all supplies and manipulations at least ________ from all walls (including the filter) and the front edge of the hood.
When compounding a sterile product, you should keep all supplies and manipulations at least 6 inches within the hood from all walls (including the filter) and the front edge of the hood.
What does a sterile compounding room mean?
A well-lit buffer space, an ante area, a storage area for sterile supplies and products, and both are secondary engineering controls are all included in the sterile compounding area. An space where a PEC is situated and where operations like preparation, compounding, and staging of CSPs take place is referred to as a buffer area (or "cleanroom").
When preparing a sterile product, you must keep all materials and operations at least 6 inches away from the hood's front edge, all walls (including the filter), and all manipulations.
To learn more about sterile compounding room from the given link below,
https://brainly.com/question/22978608
#SPJ4
What two dimensions, in addition to mass, are commonly used by physicists to derive additional measurements? length and width area and mass length and time velocity and time
In addition to mass, physicists' two commonly used dimensions to derive additional measurements are length and time.
The SI system's fundamental units are those of the basic physical quantities that are not created from other units. There are seven fundamental units, including the meter, kilogram, ampere, and second. Derived units are those which are calculated and expressed with the help of above mentioned fundamental quantities.
The dimensional formula of any quantity is the expression that specifies the powers to which the fundamental units should be raised in order to obtain one unit of a derived quantity. It is written as [M^aL^bT^x] where a, b, and x are the power to which the fundamental quantity is raised.
Therefore the additional two dimensions used by the physicists to derive additional measurements are length and time.
LEARN MORE ABOUT DIMENSIONAL ANALYSIS HERE:
https://brainly.com/question/18559676
#SPJ4
A block of lead has dimensions of 5.50 cm by 6.20 cm by 8.00 cm. The block weighs 1587.g.
From this information, calculate the density of lead.
A block of lead has dimensions of 5.50 cm by 6.20 cm by 8.00 cm. The block weighs 1587g. The density of lead is 11.30 g/cm³.
What is density?Density is a scalar quantity. It is calculated by dividing mass by volume.
Given, Length = 4.50 cm
Width = 5.20 cm
Height = 6.00 cm
Mass of lead = 1587 g
First, calculate the volume
Volume = l x b x h
Volume = 4.50 x 5.20 x 6.00
Volume = 140.4 cm³
we calculate the density of lead
1587 / 140.4 =
Density = 11.30 g/cm³
Therefore, the density of lead is 11.30 g/cm³.
To learn more about density, refer to the below link:
https://brainly.com/question/18612058
#SPJ1
Which reaction pathways shows the effect a catalyst (black) might have on an uncatalyzed reaction (gray)?
Option D) is the correct option. The role of the catalyst is to provide a new pathway for the reaction to take place which has lower activation energy.
The function of the catalyst is to change the rate of reaction without interfering with the reaction itself or without getting consumed in the reaction itself.
Catalyst only affects the activation energy of the reaction and does not change the enthalpy difference of the reaction. In other words, the final and initial energy of the product and reactant respectively remains the same even in presence of the catalyst.
In options C) and B) the final and initial energy of the reaction is different for both pathways, hence these are incorrect.
In option A) the activation energy of the uncatalyzed reaction is less than the catalyzed one which is not possible.
Therefore Option D) is the correct reaction pathway showing the effect of catalyst on an uncatalyzed reaction.
LEARN MORE ABOUT CATALYSTS HERE: https://brainly.com/question/847624
#SPJ4
Your question was incomplete. Please check below the full content
