The government described in the passage most reflects the features of which type of democracy? No

The role of the salt bridge is to assure the neutrality of both compartments.

Answer:

N2 Covalent

CCl4 Covalent

SiO2 Covalent

AlCl3 Covalent

CaCl2 Ionic

LiBr Covalent

Explanation:

With covalent bonds, there is a sharing of electron pairs between the atoms.

With ionic bonds, there is complete transfer of valence electrons between atoms. Formed by the interaction of a metal with a non-metal.

Where:

Electrons aren't transferred in covalent bonds.

Protons aren't  transferred in covalent bonds

Protons aren't shared in covalent bonds

N3-

C4+

Cl-

Si4+ = Metal

O2- = Non-metal

Al3+ = Metal

Li+ = Metal

Ca2+ = Metal

Br  1-, 1+, 5+ = Halogen

N2 = N3- and N3- Covalent

CCl4 = C4+ and Cl- x4 Covalent

SiO2 = Si4+ and O2- x 2 Metal with non metal Covalent

AlCl3 = Al3+ and Cl- x 3 Covalent Though this one is complex as to why because it seems like it should be ionic

CaCl2 = Ca2+ and Cl- x 2 Metal with non-metal Ionic

LiBr = Li+ and Br- Covalent as neither is a non-metal

Answer:

molar mass of C₃H ₈ = 44 g/mole

Explanation:

Computation of the amount of oxygen that reacts .

⇒ 75 - 12.5

⇒ 62.5 cm³

Computation of  proportion of hydrocarbons

2 mole hydrocarbons 3n+1 oxygen

⇒ 3 n + 1 = [62.5 × 2] / 12.5

⇒ 3 n + 1 = 10

⇒ n = 3

So,

Formula of the hydrocarbon is C₃H ₈

Computation of molar mass of C₃H ₈

⇒ [12×3] + [1×8]

⇒ 44 g/mole

Answer:

In isolated sysrem mass remains constant.

Explanation:

Answer:

Yes is remains constant

Explanation:

Isolated systems can't make energy or matters come in or out, so the mass stays the same.

Think of it as a marble in a balloon once you tie it and shake the marble in the balloon, there is no extra marbles coming in nor is the marble out of the balloon so that mass(weight is the same.

Answer:

temperature and whether or not they are polar or non-polar.

Answer:

Scientists with varied experimental processes and interests perceive things differently.

Explanation:

Scientists believe in proposing theories which contradict current theories. So the correct option is D.

Recently, the structure of atoms has been discovered. Before the ideal model of an atom was found, several others were proposed and abandoned.

Atomic Model of J.J. Thomson

Atomic Model of Rutherford

Therefore the correct option is D.

Read more about atomic models, here

https://brainly.com/question/1566330

#SPJ2

Answer:

moles of N

4.04 g / 14.01 = 0.288

moles of O

11.46 / 16 = 0.72 moles

divide both of them by the lowest number of moles to get the ratio

0.288 / 0.288= 1

0.72 / 0.288 = 2.48

now multiply both by 2, to make it a whole number =

ratio = 2 : 5

empirical formula = N2O5

the molar mass of the compound = 108.01

molar mass of the empirical formula = 108.02

when you divide this to get the factor the factor is also 1, so you dont really change anything

FORMULA = N2O5

Explanation:

I had it written done from my school notes

I really hope this helps

Answer:

1) accepts a proton

Explanation:

CO₃⁻²  is a base here because it is accepting a proton ( H⁺) through coordinate bonding by donating a pair of electron .

So option (1) is correct .

Answer:

The First one is: 0.563atm

The second one is: 1.692atm

Hope this helps!

Explanation: Look at Photo Attached

The pressure has been reduced with the cooling of the container, and the change in pressure has been 1.06 atm. The pressure has been increased with the heating of the container and the change in pressure has been 572 mm Hg.

Assuming the gas has been following the ideal behavior. According to the ideal gas equation,

PV =nRT

If the same gas has been heated, the n and R will be constant, as well as with the constant volume of initial and final pressure, the relationship to the P and T can be given as:

[tex]\rm \dfrac{Initial\;pressure}{Initial\;temperature}\;=\;\dfrac{Final\;pressure}{Final\;temperature}[/tex]

(a) For the gas with an initial pressure of 1.69 atm, the final pressure will be:

[tex]\rm \dfrac{1.69}{300}\;=\;\dfrac{Final\;Pressure}{100}[/tex]

Final pressure = 0.563 atm.

The change in pressure = Initial pressure - Final pressure

The change in pressure = 1.63 - 0.563 atm

The change in pressure = 1.06 atm.

The pressure has been reduced with the cooling of the container, and the change in pressure has been 1.06 atm.

(b) For the gas at initial pressure 715 mm Hg, the final pressure will be:

[tex]\rm \dfrac{715}{500}\;=\;\dfrac{Final\;Pressure}{900}[/tex]

Final pressure = 1,287 mm Hg.

The change in pressure = Final pressure - Initial pressure

The change in pressure = 1,287 - 715 mm Hg

The change in pressure = 572 mm Hg

The pressure has been increased with the heating of the container and the change in pressure has been 572 mm Hg.

For more information about the change in pressure, refer to the link:

https://brainly.com/question/12152879

Answer:

The statement is true.

Explanation:

The different means by which the energy is transferred is commonly termed to be 'wave'.

Wave refers to the disturbance transmission from a specific point to another. Different sources are involved in this transmission. The vibration of particles helps in the flow of energy from one medium to another. Vibration leads to the formation of kinetic energy flowing from one medium to another.

Answer:

It is called a compound.

Explanation:

Answer:

D.

Explanation:

CH₃C≡ CCH₂CH₂Cl

Since there are 5 carbons so the suffix used is "pent"

There is a triple bond so its alkyne

So the compound becomes 2-pentyne (2 because the triple bond is with the 2nd carbon)

Then,

The functional group of chlorine is attached with 5th carbon So the compound becomes

5-chloro,2-pentyne

Answer:

in explanation

Explanation:

Human hands are distinguished from apes by possessing longer thumbs relative to fingers.

Hope this helps!!!

Answer:

The human hand and primate hand both have finger prints and palm prints, or palmar whorls, but the prints differ. Human fingerprints have a higher ride density than primate fingerprints, which means the print ridges, or lines, are closer together. While the human’s prints are denser, primates usually have more lines overall.

Explanation:

I've learned this before

Answer:

Conduction only happens when the object is a solid, because conduction happens in objects that are closely, with molecules that are closely packed together, and have a definite shape. Since, in liquids and gases, the shape is not definite nor do they have closely packed molecules., conduction does not take place in them

Answer:

copper(ll) carbonate

Explanation:

Since the product is a salt which is copper(II) carbonate, water and carbon dioxide, this reaction is an acid + metal carbonate reaction.

Looking at the salt, Cu²⁺ has to be part of the reactants.

Hence, the missing compound there has to be copper(ll) carbonate, CuCO₃.

The balanced chemical equation would be:

CuCO₃ + 2HNO₃➙ Cu(NO₃)₂ +H₂O +CO₂

P.s. You left out CO₂ as a product in Q2 ;)

Just a recap of the main reactions you would've learnt:

1) Acid + base/ alkali ➙ salt + water

2) Acid + metal ➙ salt + hydrogen gas

3) Acid + metal carbonate ➙ salt + H₂O + CO₂

Answer:

THE PRESSURE OF THE TIRE ON THE TRIP HOME AT THE ROAD SURFACE TEMPERATURE OF 32°C IS 160 kPa.

Explanation:

Initial Pressure = 75 kPa

Initial temperature = 15 °C

Final temperature = 32 °C

Final pressure = unknown

Using the combined equation of gases;

P1V1/T1 = P2V2/ T2

Since the tire will have the same volume of air in it showing that volume of constant both at the repair shop and on the road surface.

The relationship between pressure and temperature is used with constant volume.

P1/T1 = P2/ T2

75 kPa / 15 °C = P2 / 32 °C

P2 = 75 kPa * 32 °C / 15 °C

P2 = 2400 kPa °C / 15 °C

P2 = 160 kPa.

So therefore, the pressure of the tire on the trip home when the temperature of the road surface is 32°C is 160 kPa.

Answer:

X = 4

Explanation:

Start 2800

End 175

175 = 2800x(0.5)^X

175/2800 = 0.5^X

0.0625 = 0.5^X

log(0.5 x) = log(0.0625)

x · log(0.5) = log(0.0625)

-0.301x = -1.204

x = -1.204/-0.301

x = 4

Answer:

5.3578e+24

Explanation:

1 mole = 6.02 x 10^23

6.02 x 10^23 x 8.9 =

5.3578e+24

Answer:

1. Proteins

2. Alcohol

3. Unsaturated compounds are very reactive.

4. Butene has 4 carbon atoms and one double bonds attached to it

Explanation:

1. The polymerization of amino acids gives protein.

Polymerization is a process whereby smaller unit molecules of organic compounds combine repeatedly, in a regular fashion to form a larger organic structure or compound.

The smaller units are called monomers while the larger compound formed are called the polymers.

In this case, the smaller units are the amino acids held or linked together by peptide bonds to form a polymer called proteins.

2.

Compounds with functional group of -OH are called alcohols.

Alcohols are also known as alkanols and they belong to a class of organic compounds where -OH functional group is attached to an alkyl group. They have general formula of CₓH₂ₓ₊₁OH where x refers to the number of carbon atom. They're also categorized into primary, secondary and tertiary alcohols based on the type of carbon in the which the functional group (-OH) is attached to.

3.

Unsaturated compounds are very reactive due to the presence of lone pairs of electrons present in them.

4. Butene actually has 4 carbon atoms and several single bonds attached to it.

Butene has a total of 12 bonds and 1π (pi-bond) while several 11σ (sigma bonds) are attached to it.

Answer:

d

Explanation:

edg2020

Answer:

It will reduce the quantity of metals extracted for use in the manufacturing of electronics

Explanation:

The manufacturing of electronics is a huge market for the metal extraction industry. Many electronics have metal casing, metal circuit boards etc. This implies that a large quantity of metal is required for the production of electronics. This leads to consistent mining activities in order to supply enough quantity of metal to produce more electronics.

However, if electronics are recycled, less metals are extracted for the electronics industry. This saves energy required for mining operations and minimizes the deleterious environmental impact associated with metal mining from the earth. These deleterious consequences include; erosion, sinkholes, loss of biodiversity, contamination of soil, groundwater, and surface water by the chemicals emitted from mining processes.

Hence, recycling of electronics saves the environment from the degradation caused by consistent mining activities. Reduction of mining activities by recycling ought to be an important goal of the electronics manufacturing industry.

Answer:

Fractional distillation

Explanation:

Heat the mixture upto 700°C

The compuond with low boiling point will evaporate first and the compound with higher boiling point will evaporate last.

Answer:

A. formation of snow

Explanation:

The formation of snow is an example of interactions between the atmosphere and hydrosphere.

As snow formation takes place when water vapor converted into liquid through condensation in the clouds. As water droplets rises high in clouds, cooler air present in atmosphere allow to lower the temperature and water droplets form ice or snow.

Hence, the correct option is A.

Answer:

A:formation of snow

Explanation:

The final temperature of a mixture of 100g of water at 20°C and 50g of water at 50°C is 30°C.

The amount of heat lost by the hotter sample = The amount of heat gained by the cooler water sample

The amount of heat gained by the cooler water sample is: -

Q1₁= m₁c(T – T₁)

The amount of heat lost by the hotter water sample is: -

Q₂ = m₂c(T₂ - T)

Q₁ = Q₂

m₁c(T – T₁) = m₂c(T₂ - T)

T = (m₁T₁ + m₂T₂)/(m₁+ m₂)

Let the final temperature of the mixture of 100g of water at 20°C and 50g of water at 50°C be T.

m₁ = 100g

T₁ = 20°C

m₂ = 50g

T₂ = 50°C

The final temperature of water = (100*20+50*50)/(100+50)

= (2000+2500)/(150)

=4500/150

=30°C

Therefore , the final temperature of a mixture of 100g of water at 20°C and 50g of water at 50°C is 30°C.

To know more about method of mixtures

https://brainly.com/question/14033522

#SPJ2

Answer:

160.86 g to the nearest hundredth.

Explanation:

H2 + O  ---> H2O

2.016 g H2 produces 18.016 g H2O

1g      ..    ..   ..   ..   ..    18.016 / 2.016 g H2O

18g   ..   ..   ..  ..  .. . .     (18.016 * 18) / 2.016 g H2O.

= 160.86 g.

Answer:

The 1918 influenza pandemic and 2002-2003 SARS outbreak suggests social distancing measures, communication, and international cooperation are the most effective methods to slow down the coronavirus.

Explanation:

Answer:

Yes because magnesium has a more negative reduction potential than aluminum.

Explanation:

The single factor that will determine whether a battery with magnesium as anode and aluminium as cathode will work or not is the respective electrode potentials of the two elements.

Recall that in a battery, oxidation occur at the anode and reduction occurs that the cathode. The reduction potential shows the ease with which a metal is reduced or oxidized. The substance with the most negative reduction potential will function as the anode while the substance with the less negative electrode potential will function as the anode.

The reduction potential of Magnesium is -2.37 V while that of aluminum is -1.66 V. This implies that magnesium must function as the anode and aluminum as the cathode in order to have a spontaneous electrochemical process in the cell.