The correct answer for The half-life of an isotope is one day. At the end of three days, how much of the isotope remains is D) one-eighth
The half-life of an isotope is the amount of time it takes for half of the substance to decay. In this case, the half-life is one day. Therefore, after one day, half of the isotope will remain, and the other half will have decayed. After two days, half of what remained after the first day will remain, so a quarter of the original isotope will remain. After three days, half of what remained after the second day will remain, so one-eighth of the original isotope will remain. The correct answer is D) one-eighth. In conclusion, the amount of the isotope that remains after three days is determined by taking one-half of the previous day's remaining amount, resulting in one-eighth of the original isotope remaining after three days.
To know more about isotope visit:
brainly.com/question/28039996
#SPJ11
what are the molecular and empirical chemical formulas of a compound made up of these molecules? iron 70.0 oxygen 30.1
The empirical formula of the compound made up of 70.0% iron and 30.1% oxygen is Fe₂O₃, and the molecular formula can be the same as the empirical formula, Fe₂O₃.
To determine the empirical formula, we need to find the simplest whole-number ratio of the elements present in the compound. Given the percentages of iron (Fe) and oxygen (O), we can assume a 100 g sample of the compound.
The mass of iron is 70.0 g (70.0% of 100 g), and the mass of oxygen is 30.1 g (30.1% of 100 g).
Next, we calculate the moles of each element using their respective molar masses:
moles of Fe = 70.0 g / 55.85 g/mol ≈ 1.252
moles of O = 30.1 g / 16.00 g/mol ≈ 1.881
Then, we divide the number of moles of each element by the smallest number of moles to obtain the simplest whole-number ratio:
1.252 / 1.252 ≈ 1 (for Fe)
1.881 / 1.252 ≈ 1.5 (for O)
Since we need to express the empirical formula using whole numbers, we multiply the ratio by 2 to obtain the simplest ratio:
1 × 2 = 2 (for Fe)
1.5 × 2 = 3 (for O)
Therefore, the empirical formula of the compound is Fe₂O₃, and the molecular formula can be the same as the empirical formula, Fe₂O₃.
To learn more about empirical formula, here
https://brainly.com/question/32125056
#SPJ4
Under which of the following conditions would one mole of Ne have the highest entropy; S? 132*C and 30 L 28*€ and 26 L 132'C and 26 L 28'C and 30 L
The entropy of a gas is directly proportional to the volume it occupies and inversely proportional to its temperature. Therefore, under the given conditions, the highest entropy (S) of one mole of Ne would occur at 28°C and 30 L.
This is because at higher temperatures, the gas molecules have higher kinetic energy and move more rapidly, increasing their disorder or entropy. On the other hand, at lower volumes, the gas molecules are more confined and have less space to move around, leading to a decrease in entropy.
Therefore, the conditions of 28°C and 30 L would result in the highest entropy for one mole of Ne.
Learn more about entropy here:
https://brainly.com/question/20166134
#SPJ11
a solution of the amino acid aspartic acid is at ph 1. what will be the overall charge, the charge on the two functional groups, and the r group?
At pH 1, aspartic acid will have an overall charge of -1. The carboxyl group will have a charge of -1 and the amino group will be protonated with a charge of +1. The R group will remain unchanged.
Aspartic acid is an amino acid with an acidic side chain, which means it can donate protons. At pH 1, the solution is very acidic and the amino group will be protonated, giving it a charge of +1. The carboxyl group, which is already acidic, will also donate a proton at this pH, resulting in a charge of -1.
Since the charge on the carboxyl group is higher than that of the amino group, the overall charge of the molecule will be -1. The R group, which in this case is a carboxyl group, will remain unchanged as it is not affected by the pH of the solution. Therefore, the overall charge on aspartic acid at pH 1 is -1, with the carboxyl group carrying a charge of -1 and the amino group carrying a charge of +1.
Learn more about aspartic acid here:
https://brainly.com/question/9379332
#SPJ11
at the end of 14 min, 1/16 of a sample of radioactive polonium remains. the corresponding half-life is
The corresponding half-life of this sample of radioactive polonium is 43.22 min.
To solve this problem, we need to use the formula for radioactive decay:
N = N0 x (1/2)^(t/T)
where N is the remaining amount, N0 is the initial amount, t is the time elapsed, and T is the half-life.
We know that at the end of 14 min, 1/16 of the sample remains. This means that N/N0 = 1/16, or N0/N = 16. We can substitute these values into the formula and solve for T:
1/16 = (1/2)^(14/T)
Taking the logarithm of both sides, we get:
log(1/16) = log[(1/2)^(14/T)]
log(1/16) = (14/T) x log(1/2)
T = -14 / [log(1/2) x log(1/16)]
T = 43.22 min (rounded to two decimal places)
Therefore, the corresponding half-life of this sample of radioactive polonium is 43.22 min. This means that after 43.22 min, half of the remaining sample will decay, leaving only 1/32 of the original amount. After another 43.22 min, half of that remaining amount will decay, leaving only 1/64 of the original amount, and so on. The half-life is an important characteristic of a radioactive substance, as it allows us to predict how much of the substance will remain after a certain amount of time has passed.
To know more about Radioactive visit:
https://brainly.com/question/1770619
#SPJ11
how many moles of nacl are contained in 350. ml of a 0.115 m solution of sodium chloride? a. 0.114 b. 0.040 c. 0.081
The number of moles of NaCl contained in 350 ml of a 0.115 M solution can be calculated by using the formula: moles = volume (in liters) x molarity: moles = 0.35 L x 0.115 M = 0.04025 moles. Therefore, the correct answer is option (b) 0.040.
In the given solution, the volume is converted from milliliters to liters by dividing by 1000 since there are 1000 milliliters in a liter. Then, we multiply the converted volume by the molarity of the solution, which represents the number of moles of solute (NaCl) per liter of solution. By multiplying the volume and molarity, we obtain the number of moles of NaCl present in the solution. Rounding the result to the appropriate number of significant figures, we find that there are approximately 0.040 moles of NaCl in 350 ml of the 0.115 M solution, confirming option (b) as the correct answer.
learn more about molarity here: brainly.com/question/31545539
#SPJ11
how many equivalents of mg+2 are present in a solution that contains 2.75 mol of mg+2?
To answer this question, we need to convert the 2.75 mol of mg+2 to mg. The molar mass of mg+2 is 24.31 g/mol. Therefore, we can calculate the mass of 2.75 mol of mg+2 as follows:
mass = 2.75 mol x 24.31 g/mol = 66.7275 g
Since mg+2 has a charge of 2+, we need to divide the mass by 2 to get the number of equivalents of mg+2:
equivalents = 66.7275 g / 2 = 33.36375 equivalents
Finally, we need to convert the equivalents to mg+2. One equivalent of mg+2 is equal to 24.31 mg. Therefore, we can calculate the number of mg+2 equivalents as follows:
mg+2 equivalents = 33.36375 equivalents x 24.31 mg/equivalent = 811.51 mg
In conclusion, there are 811.51 mg+2 equivalents in a solution containing 2.75 mol of mg+2.
To determine the number of equivalents of Mg²⁺ in a solution, we need to know the valence of the ion. There are 5.50 equivalents of Mg²⁺ present in the solution containing 2.75 moles of Mg²⁺.
The definition of an equivalent is the amount of a substance that will react with or replace one mole of hydrogen ions (H⁺). Since Mg²⁺ has a valence of 2, one equivalent of Mg²⁺ will react with or replace two moles of H⁺.Given that you have 2.75 moles of Mg²⁺, we can calculate the number of equivalents:
equivalents of Mg²⁺ = (2.75 mol Mg²⁺) ₓ (2 equivalents/mol Mg²⁺)
equivalents of Mg²⁺= 5.50 equivalents
Therefore, there are 5.50 equivalents of Mg²⁺ present in the solution containing 2.75 moles of Mg²⁺.
Learn more about Mol
brainly.com/question/31065516
#SPJ4
an ag / agcl electrode dipping into 1.00 m hcl what is the molar concentration of cl- in the unknown solution
The molar concentration of Cl- in the unknown solution is 1.31 M.
Since the Ag/AgCl electrode is in equilibrium with the solution, the electrode potential can be used to determine the concentration of Cl- ions in the unknown solution. The standard electrode potential for the Ag/AgCl electrode is +0.222 V at 25 °C. At equilibrium, the electrode potential is equal to the potential of the half-reaction:
AgCl(s) + e- → Ag(s) + Cl-
The electrode potential can be expressed as:
Ecell = E°cell - (RT/nF) ln Q
where E°cell is the standard electrode potential, R is the gas constant, T is the temperature in kelvin, n is the number of electrons transferred, F is Faraday's constant, and Q is the reaction quotient.
For the half-reaction shown above, n = 1. At equilibrium, Q = [Ag+][Cl-]/[AgCl]. Since the Ag/AgCl electrode is a solid, its activity is considered to be 1. Therefore, Q = [Cl-].
Substituting the values into the equation, we get:
Ecell = 0.222 V - (0.0257 V/K)(298 K)/(1 mol/96485 C/mol) ln [Cl-]
Solving for [Cl-], we get [Cl-] = 1.31 M. Therefore, the molar concentration of Cl- in the unknown solution is 1.31 M.
Learn more about electrode here:
https://brainly.com/question/31642782
#SPJ11
the silicate mineral amphibole has 50% of its silicate tetrahedra possessing 3-shared oxygen atoms and 1-unshared and 50% of its silicate tetrahedra possessing 2-shared oxygen atoms and 2-unshared oxygen atoms. what is the ratio of si:o in the tetrahedral structure of this mineral?
If the silicate mineral amphibole has 50% of its silicate tetrahedral possessing 3-shared and 1-unshared and another 50% possessing 2-shared and 2-unshared oxygen atoms, the Si:O ratio is 1:4.
In the amphibole silicate mineral, 50% of the silicate tetrahedra have 3-shared oxygen atoms and 1-unshared, while the other 50% have 2-shared oxygen atoms and 2-unshared. To calculate the Si:O ratio, we'll analyze the contribution of each type of tetrahedron.
For the 3-shared, 1-unshared tetrahedra (50%):
1 Si and 4 O atoms (3 shared + 1 unshared) per tetrahedron.
For the 2-shared, 2-unshared tetrahedra (50%):
1 Si and 4 O atoms (2 shared + 2 unshared) per tetrahedron.
Since both types contribute equally, the overall ratio remains the same. Thus, the Si:O ratio in the tetrahedral structure of the amphibole silicate mineral is 1:4.
More on tetrahedral structure: https://brainly.com/question/28138253
#SPJ11
a compound has the formula al2x3. which one of the following could be x?
A. P
B. S
C. H
D. Cl
Based on the given compound formula Al2X3, the most likely element for X is: D. Cl. The compound with the formula Al2X3 suggests that there are two aluminum atoms and three atoms of a particular element represented by "X".
To determine which element "X" could be, we need to consider the valency of aluminum and the other elements. Aluminum has a valency of +3, which means it can bond with three other atoms to complete its valence shell. Among the given options, sulfur (S) and chlorine (Cl) have a valency of -2, while phosphorus (P) and hydrogen (H) have a valency of -3 and +1, respectively.
Therefore, the correct answer would be D. Cl, as it can form a compound with Al in the ratio of 2:3 by gaining three electrons to attain a noble gas configuration. The compound would be Al2Cl3, which is aluminum chloride, a well-known and stable compound. The other options (A. P, B. S, C. H) do not form stable compounds with aluminum in a 2:3 ratio.
To know about aluminum:
https://brainly.com/question/28989771
#SPJ11
What volume would 1.72 x 1023 molecules of an ideal gas occupy at STP?
Answer:
6.70 liters of volume
Explanation:
At STP (Standard Temperature and Pressure), the temperature is 273.15 K (0°C) and the pressure is 1 atm (101.325 kPa).
To determine the volume of the gas, we can use the ideal gas law, which relates the pressure, volume, temperature, and number of molecules of a gas:
PV = nRT
where:
P = pressure (in atm)
V = volume (in liters)
n = number of moles of gas
R = gas constant (0.08206 L·atm/K·mol)
T = temperature (in Kelvin)
To solve for the volume, we can rearrange the equation:
V = (nRT)/P
We are given the number of molecules of the gas, which is 1.72 x 10^23. To convert this to moles, we need to divide by Avogadro's number:
n = (1.72 x 10^23)/(6.022 x 10^23) = 0.286 moles
Substituting the values into the equation, we get:
V = (0.286 mol x 0.08206 L·atm/K·mol x 273.15 K)/1 atm = 6.70 liters
Therefore, 1.72 x 10^23 molecules of an ideal gas would occupy 6.70 liters of volume at STP.
ndium has the atomic number 49 and atomic mass of 114.8 g. naturally occurring indium contains a mixture of indium-112 and indium-115, respectively. calculate the percent ratio of in-112: in-115 112 in : 115in
The percent ratio of In-112 to In-115 in naturally occurring indium is approximately 21.3% to 78.7%. The atomic mass of indium is a weighted average of the atomic masses of its isotopes, taking into account their relative abundances:
Atomic mass of Indium = (mass of In-112 * % abundance of In-112) + (mass of In-115 * % abundance of In-115)
We can rearrange this equation to solve for the ratio of In-112 to In-115:
% abundance of In-112 / % abundance of In-115 = (Atomic mass of Indium - mass of In-115) / (mass of In-112 - mass of In-115)
Substituting the values given:
Atomic mass of Indium = 114.8 g/mol
Mass of In-112 = 111.905 g/mol
Mass of In-115 = 114.904 g/mol
% abundance of In-112 / % abundance of In-115 = (114.8 - 114.904) / (111.905 - 114.904) ≈ 0.213.
In conclusion, we have calculated the percent ratio of In-112 to In-115 in naturally occurring indium using the atomic mass of indium and the atomic masses and abundances of its isotopes.
for more questions on isotopes
https://brainly.com/question/14783375
#SPJ11
Refer to your Pink and Say book for a complete version of this text. Which detail from the story best explains to your Pink and Say book for a complete version of this text.
A:I took up and run away from my unit
B:“Then fever must have took me good, ‘cause I could feel a cool, sweet-smelling quilt next to my face.”
C:“’Bein’ here, boy, means you gotta be dead,’ the voice said as he gave me a drink from his kit.”
D:“Being just a lad, I was wishin’ I was home.”
I also picked a random subject cause i didnt see ELA/Reading
Based on the book Pink and Say by Patricia Polacco, The detail from the story that best explains what the "Pink and Say" book is about is option B: "Then fever must have took me good, ‘cause I could feel a cool, sweet-smelling quilt next to my face.”
What is the book about?The protagonist, Sheldon Russell Curtis, regains consciousness after being shot and abandoned during the American Civil War and notices a pleasant quilt next to him, indicating that he had been tended to by someone.
After being saved by a youthful African American soldier called Pinkus Aylee, or "Pink," he is transported to Pink's mother's residence to recuperate. The narrative revolves around the unexpected bond that evolves between Pink and Sheldon, who both confront the harrowing experiences of warfare and the unfairness of enslavement.
Learn more about Pink and Say from
https://brainly.com/question/22858786
#SPJ1
cro42−(aq)→cr(oh)3(s) express your answer as a chemical equation including phases.
[tex]CrO_{4} ^{2-} (aq) + 3H_{2} O (l)[/tex]→ [tex]Cr(OH)_{3} (s) + 4OH^{-} (aq)[/tex] is the chemical equation for the reaction between chromate ion and water.
The decent synthetic condition for the response between chromate particle ([tex]CrO_{4} ^{2-}[/tex]) and water to deliver chromium (III) hydroxide ([tex]Cr(OH)_{3}[/tex]) is as per the following:
[tex]CrO_{4} ^{2-} (aq) + 3H_{2} O (l)[/tex] → [tex]Cr(OH)_{3} (s) + 4OH^{-} (aq)[/tex]
In this situation, the chromate particle ([tex]CrO_{4} ^{2-}[/tex]) responds with water ([tex]H_{2} O[/tex]) to create chromium (III) hydroxide ([tex]Cr(OH)_{3}[/tex]) and hydroxide particles (Goodness ). This response is an illustration of a precipitation response, where an insoluble strong is framed when two watery arrangements are combined as one.
The chromium (III) hydroxide ([tex]Cr(OH)_{3}[/tex]) framed in this response is a green strong, which can be utilized as a color or in the assembling of different synthetic compounds. The hydroxide particles (Goodness ) created in the response can likewise respond with different particles to frame different mixtures or take part in corrosive base responses.
Generally, the reasonable compound condition for the response between chromate particle and water to deliver chromium (III) hydroxide is [tex]CrO_{4} ^{2-} (aq) + 3H_{2} O (l)[/tex]→ [tex]Cr(OH)_{3} (s) + 4OH^{-} (aq)[/tex].
To learn more about chemical equation, refer:
https://brainly.com/question/19588021
#SPJ1
The indicator used in the titration of a strong acid and a strong base is/are:
This question has multiple correct options
A. phenolphthalein
B. methyl orange
C. alizarin yellow
D. red litmus
The indicators used in the titration of a strong acid and a strong base are phenolphthalein and methyl orange. Option A and B.
Phenolphthalein changes color from colorless to pink at a pH of around 8.2-10.0, which is the endpoint of the titration of a strong base with a strong acid. On the other hand, methyl orange changes color from red to yellow at a pH of around 3.1-4.4, which is the endpoint of the titration of a strong acid with a strong base.
Alizarin yellow and red litmus are not commonly used as indicators in this type of titration. The choice of indicator depends on the type of acid and base being titrated, as well as the desired accuracy and precision of the results. The answers are options A and B.
More on indicators: https://brainly.com/question/30038798
#SPJ11
a buffer is 0.100 m in nh4cl and 0.100 m nh3. when a small amount of hydrobromic acid is added to this buffer, which buffer component neutralizes the added acid?
A buffer solution is a mixture of a weak acid and its conjugate base or a weak base and its conjugate acid that resists changes in pH when an acid or base is added to it.
In this case, the buffer solution contains 0.100 m NH4Cl and 0.100 m NH3, which is a weak base and its conjugate acid
when a small amount of hydrobromic acid (HBr) is added to the buffer solution, it will react with the weak base (NH3) in the buffer to form NH4+. This will increase the concentration of NH4+ in the solution. The excess H+ ions from HBr will be neutralized by the NH3 in the buffer, which acts as a base. The NH3 will react with the H+ ions to form NH4+, which will maintain the pH of the solution.
Therefore, in this case, the buffer component that neutralizes the added hydrobromic acid is NH3. It acts as a base to neutralize the excess H+ ions and maintain the pH of the solution in summary, the addition of hydrobromic acid to a buffer solution containing NH4Cl and NH3 will cause the NH3 component to neutralize the added acid.
To know more about conjugate base visit:
https://brainly.com/question/31229565
#SPJ11
sodium hydroxide (aq) + cadmium(ii) nitrate (aq) \longrightarrow
Answer:
Sodium hydroxide (NaOH) and cadmium(II) nitrate (Cd(NO3)2) react to form sodium nitrate (NaNO3) and cadmium hydroxide (Cd(OH)2). The balanced equation is:
NaOH(aq) + Cd(NO3)2(aq) → NaNO3(aq) + Cd(OH)2(s)
The reaction produces a white precipitate of cadmium hydroxide.
Explanation:
What change will be caused by the addition of a small amount of HCl to a solution containing fluoride ions (F
−
) and hydrogen fluoride (HF)?
a. The concentration of hydronium ions will increase significantly.
b. The concentration of fluoride ions will increase as will the concentration of hydronium ions.
c. The concentration of hydrogen fluoride will decrease and the concentration of fluoride ions will increase.
d. The concentration of fluoride ion will decrease and the concentration of hydrogen fluoride will increase.
e. The fluoride ions will precipitate out of solution as its acid salt.
When a small amount of HCl is added to a solution containing fluoride ions (F−) and hydrogen fluoride (HF), the following change will occur:
c. The concentration of hydrogen fluoride will decrease and the concentration of fluoride ions will increase.
This is because the HCl will react with the HF to form H
3
O
+
and F
−
, according to the following equation:
HCl + HF → H
3
O
+
+ F
−
This reaction is an example of an acid-base reaction, where HCl acts as the acid and HF acts as the base. The result is that the concentration of HF will decrease, since it is being used up in the reaction, while the concentration of F−
will increase, since it is being produced.
Fluoride ions are negatively charged atoms of the element fluorine (F), which have gained one electron to achieve a stable electron configuration. Fluoride ions are highly reactive and are found in many minerals, as well as in seawater and some freshwater sources.
Fluoride ions are widely used in dental products such as toothpaste, mouthwash, and professional fluoride treatments because they can help prevent tooth decay. Fluoride ions work by strengthening tooth enamel, which is the hard outer layer of the teeth that protects against decay.
Visit here to learn more about fluoride ions brainly.com/question/10916463
#SPJ11
What will be the new volume of a balloon if it has a volume of 350 mL at 19 C and 1 atm, and rises in the air to a temp of 17 C and 0.8 atm?
The new volume of the balloon at 17°C and 0.8 atm is approximately 434.5 mL.
What is the final volume of the balloon?The combined gas law put together both Boyle's Law, Charles's Law, and Gay-Lussac's Law.
It is expressed as:
[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}[/tex]
Given that:
Initial volume V₁ = 350 mLInitial pressure P₁ = 1.0 atmInitial temperature T₁ = 19°C = ( 19 + 273.15)K = Final pressure P₂ = 0.8 atmFinal temperature T₂ = 17°C = ( 17 + 273.15 ) = 290.15KFinal volume V₂ = ?Plug the given values into the combined gas law formula and solve for the final volume.
[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}\\\\P_1V_1T_2 = P_2V_2T_1\\\\V_2 = \frac{P_1V_1T_2}{P_2T_1} \\\\V_2 = \frac{1.0atm\ *\ 350mL\ * \ 290.15K}{0.8atm\ *\ 292.15K } \\\\V_2 = 434.5\ mL[/tex]
Therefore, the final volume is approximately 434.5 mL.
Learn more about the combined gas law here: https://brainly.com/question/27403107
#SPJ1
gasoline burning is a combustion reaction, which is always exothermic (gasoline engines get very blank when running).target 1 of 3 steam condensing is an exothermic process, since the steam blank a lot of heat when it condenses (which is why you can get severely burned from steam).target 2 of 3 water boiling is an endothermic process, since the water molecules in steam have blank kinetic energy than the molecules in the liquid phase.
The process that occurs when water molecules transition from the gaseous state to the liquid state is known as condensation.
It is an exothermic process. During condensation, the water vapor molecules lose energy and release heat as they come together to form liquid water. This release of heat is why you can get severely burned from the steam. The energy released during condensation is the latent heat of vaporization, which was absorbed during the vaporization process when water changed from a liquid to a gaseous state. So, condensation is an exothermic process that involves the transfer of heat from the vapor to the surroundings.
To know more about exothermic process, here
brainly.com/question/29555731
#SPJ4
--The complete Question is, Which type of process occurs when water molecules transition from the gaseous state to the liquid state? Is it exothermic or endothermic? --
radon is dangerous because . question 17 options: it is a gas it is used to treat lung cancer it produces gamma rays if it decays in the lungs, it produces an alpha particle and an atom of a radioactive solid
If it decays in the lungs, it produces an alpha particle and an atom of a radioactive solid.
Radon is a colorless, odorless, and tasteless radioactive gas that is formed naturally from the decay of uranium and thorium. When radon is inhaled, it can decay in the lungs and release alpha particles, which are highly ionizing and can damage lung tissue. This damage can increase the risk of developing lung cancer, particularly in individuals who are exposed to high levels of radon over a long period of time. Therefore, radon is considered dangerous and is classified as a carcinogen by the World Health Organization (WHO) and the Environmental Protection Agency.
To know more about Protection visit :
https://brainly.com/question/23421785
#SPJ11
pyo- (py/o/rrhea; pyo/genic) means:
The term "pyo-" (py/o/rrhea; pyo/genic) means "pus" or "related to pus."
What is the term "pyo-" (py/o/rrhea; pyo/genic)?The prefix "pyo-" is derived from the Greek word "pyon," which means pus. When used as a prefix in medical terminology, "pyo-" indicates a condition or process related to pus or the presence of pus.
For example, "pyorrhea" refers to a condition characterized by the discharge of pus from a wound or an infection of the gums. In this case, the term combines "pyo-" (meaning pus) and "-rrhea" (meaning discharge or flow).
Similarly, "pyogenic" refers to something that causes or is related to the production of pus. It is often used to describe bacteria or microorganisms that can lead to the formation of pus in infected tissues.
In summary, the prefix "pyo-" in medical terminology denotes pus or the involvement of pus in a specific condition, indicating a discharge, infection, or pus-forming process.
To know more about microorganisms, refer here:
https://brainly.com/question/9004624#
#SPJ4
how much heat is required to warm 1.50 kg of sand from 26.0 ∘c to 100.0 ∘c?The specific heat capacity of sand is Cs=0.84J/g⋅∘C. Express the heat in joules to three significant figures.
Part B)
A 61 g aluminum block initially at 26.0 ∘C absorbs 747 J of heat. What is the final temperature of the aluminum?
Express your answers using one decimal place and include the appropriate units
PArt C)
To determine whether a shiny gold-colored rock is actually gold, a chemistry student decides to measure its heat capacity. She first weighs the rock and finds it has a mass of 3.5 g . She then finds that upon absorption of 50.2 J of heat, the temperature of the rock rises from 25 ∘C to 53 ∘C.
Substance Specific heat
capacity, Cs
(J/(g⋅∘C))∗
Elements
Lead 0.128
Gold 0.128
Silver 0.235
Copper 0.385
Iron 0.449
Aluminum 0.903
Compounds
Ethanol 2.42
Water 4.18
Materials
Glass (Pyrex) 0.75
Granite 0.79
Sand 0.84
∗ At 298 K.
Find the specific heat capacity of the substance composing the rock.
Express the specific heat in joules per gram-Celsius to two significant figures.
Part A: the heat required to warm 1.50 kg of sand from 26.0 ∘C to 100.0 ∘C is 1.09 x 10^5 J. Part B: the final temperature of the aluminum block is 26.0 + 12.3 = 38.3 ∘C. Part C: the specific heat capacity of the substance composing the rock is 0.23 J/g⋅∘C.
Part A:
The heat required to warm 1.50 kg of sand can be calculated using the formula:
q = mCsΔT
where q is the heat, m is the mass of sand, Cs is the specific heat capacity of sand, and ΔT is the change in temperature.
Substituting the values, we get:
q = (1.50 kg) x (1000 g/kg) x (0.84 J/g⋅∘C) x (100.0 - 26.0) ∘C
q = 1.09 x 10^5 J
Therefore, the heat required to warm 1.50 kg of sand from 26.0 ∘C to 100.0 ∘C is 1.09 x 10^5 J.
Part B:
The final temperature of the aluminum block can be calculated using the formula:
q = mCsΔT
where q is the heat absorbed by the aluminum block, m is the mass of the block, Cs is the specific heat capacity of aluminum, and ΔT is the change in temperature.
Rearranging the formula, we get:
ΔT = q/(mCs)
Substituting the values, we get:
ΔT = 747 J / (61 g x 0.903 J/g⋅∘C)
ΔT = 12.3 ∘C
Therefore, the final temperature of the aluminum block is 26.0 + 12.3 = 38.3 ∘C.
Part C:
The specific heat capacity of the substance composing the rock can be calculated using the formula:
Cs = q/(mΔT)
where q is the heat absorbed by the rock, m is the mass of the rock, and ΔT is the change in temperature.
Substituting the values, we get:
Cs = 50.2 J / (3.5 g x (53 - 25) ∘C)
Cs = 0.23 J/g⋅∘C
Therefore, the specific heat capacity of the substance composing the rock is 0.23 J/g⋅∘C.
Visit here to learn more about heat capacity brainly.com/question/28302909
#SPJ11
Question 2(Multiple Choice Worth 3 points)
(01.05 LC)
Which of the following represents the average kinetic energy of an object's particles?
•Potential energy
•Thermal energy
•Type of atoms in matter
•Type of molecules in matter
The average kinetic energy of an object's particles is thermal energy and the correct option is option 2.
The energy associated with an object’s motion is called kinetic energy.
In chemistry, kinetic energy is the energy associated with the constant, random bouncing of atoms or molecules.
Thermal energy and temperature are closely related. Both reflect the kinetic energy of moving particles of matter. However, temperature is the average kinetic energy of particles of matter, whereas thermal energy is the total kinetic energy of particles of matter.
The greater the motion of particles, the higher a substance’s temperature and thermal energy.
Learn more about Kinetic energy, here:
https://brainly.com/question/999862
#SPJ1
you start with two connected bulbs at 25 degrees celsius at the following conditions:
bulb 1: 2.00 L; 0.9 atm H2
bulb 2: 4.5 L; 1.2 atm N2
when the connection between these two bulbs is open they proceed with the following reaction to completion:
3H2 + N2 = 2NH3
how many moles of ammonia (NH3) are present after the reaction ?
There are 0.0488 moles of ammonia (NH3) present after the reaction.
How many moles of NH3 are present after the reaction?To determine the moles of ammonia (NH3) produced after the reaction, we start by calculating the moles of H2 and N2 present initially.
Using the ideal gas law, we can calculate the moles of H2 by dividing the product of the pressure and volume of Bulb 1 by the gas constant and temperature.
This gives us 0.0732 moles of H2. Similarly, for N2, we find 0.2476 moles using the same calculation.
Since the stoichiometric ratio between H2 and NH3 is 3:2, we compare the moles of H2 and N2 to determine the limiting reagent. In this case, H2 is the limiting reagent.
Finally, we calculate the moles of NH3 produced by multiplying the moles of H2 by the ratio of NH3 to H2, which gives us 0.0488 moles of NH3.
Therefore, after the completion of the reaction, there are 0.0488 moles of ammonia present.
learn more about celsius
brainly.com/question/1373930
#SPJ11
electrostatic catalysis proceeds via covalent bonding interactions. True/ False
False. Electrostatic catalysis and covalent bonding interactions are two different types of chemical interactions that occur between atoms and molecules.
Electrostatic catalysis refers to a process in which a catalyst accelerates a chemical reaction by altering the charge distribution around the reactants, without participating in the reaction itself. This process relies on the electrostatic interactions between the catalyst and the reactants, which can help to stabilize the transition state of the reaction and lower the activation energy required for the reaction to proceed.
In contrast, covalent bonding interactions occur when atoms share electrons to form a chemical bond. These interactions are much stronger than electrostatic interactions and involve the sharing of electrons between atoms.
While both types of interactions can play important roles in chemical reactions, electrostatic catalysis does not typically involve covalent bonding interactions. Instead, it relies on the weaker electrostatic interactions between the catalyst and the reactants. These interactions can be enhanced by the geometric and electronic properties of the catalyst, as well as the nature of the reactants and the reaction conditions.
Learn more about catalysis here:
https://brainly.com/question/30898692
#SPJ11
what type of bond is joining the two hydrogen atoms? two hydrogen atoms that share two electrons. what type of bond is joining the two hydrogen atoms? two hydrogen atoms that share two electrons. hydrophilic ionic hydrogen covalent hydrophobic
Write the equation to show the formation of ions in NH4OH & HNO3.
The following equations shows the ion formation:
NH₄OH → NH₄⁺ + OH⁻
HNO₃ → H⁺ + NO₃⁻
Understanding Formation of IonsThe formation of an ion involves the process of adding or removing one or more electrons from an atom or molecule, resulting in a charged species.
This can occur through a variety of methods, including chemical reactions, exposure to radiation, or the application of an electric field.
From the above question, we can represent the formation of ions in NH₄OH (ammonium hydroxide) and HNO₃ (nitric acid) by the following equations:
NH₄OH → NH₄⁺ + OH⁻
In this equation, ammonium hydroxide dissociates into ammonium cation (NH₄⁺) and hydroxide anion (OH⁻) ions.
HNO₃ → H⁺ + NO₃⁻
In this equation, nitric acid dissociates into hydrogen cation (H⁺) and nitrate anion (NO₃⁻) ions.
Learn more about formation of ion here:
https://brainly.com/question/1310794
#SPJ1
One difference between carbon-12 (126C) is that carbon-14 (146C) has
A) two more electrons than carbon-12.
B) two more neutrons than carbon-12.
C) two more electrons and two more neutrons than carbon-12.
D) two more protons and two more neutrons than carbon-12.
E) two more protons than carbon-12.
The correct option is B) two more neutrons than carbon-12.
Carbon-12 and carbon-14 are isotopes of carbon, meaning they have the same number of protons (6) but different numbers of neutrons. Carbon-12 has 6 neutrons, while carbon-14 has 8 neutrons.
This difference in neutron number gives carbon-14 a different atomic mass than carbon-12.
Carbon-14 is a radioactive isotope that is commonly used for radiocarbon dating of materials. The extra neutrons in carbon-14 make it unstable and it undergoes radioactive decay, with a half-life of about 5,700 years.
By measuring the amount of carbon-14 remaining in a sample, scientists can determine how long ago it was alive. Carbon-14 is also used in medical research and as a tracer in scientific experiments.
Visit here to learn more about Neutrons:
brainly.com/question/26952570
#SPJ11
gas particles lose energy every time they collide with each other or the container wall.
True or False
The statement "gas particles lose energy every time they collide with each other or the container wall" False.
Gas particles do collide with each other and the container wall, but they do not necessarily lose energy with every collision. In an elastic collision, kinetic energy is conserved, meaning that the total kinetic energy of the gas particles remains constant before and after the collision.
Gases are made up of atoms or molecules that are always moving randomly. The walls of the gas particles' container and other gas particles are continually clashing with them. These collisions are elastic, meaning that there is no overall energy loss as a result of them.
When a gas particle collides with another particle or the container walls, none of its energy is wasted. So, the statement is False.
To know more about collision: https://brainly.com/question/30911220
#SPJ11
What happens to a material if it's dissolved in a solvent?
A. The solute is split into its ions.
B. The solute bonds to the solvent, forming new compounds.
C. The solute disappears forever.
D. The solvent is split into its ions.
The correct answer is B. The solute bonds to the solvent, forming new compounds.
When a material is dissolved in a solvent, the solute particles become dispersed and surrounded by solvent molecules. This process typically involves the solute molecules or ions breaking apart and interacting with the solvent molecules through various intermolecular forces such as hydrogen bonding, dipole-dipole interactions, or ion-dipole interactions.
As a result, new compounds or species are formed in the solution, where the solute particles are now incorporated within the solvent. This allows for the homogeneous mixing of the solute and solvent at the molecular or ionic level, resulting in a uniform distribution of particles throughout the solvent.
[tex]\huge{\mathcal{\colorbox{black}{\textcolor{lime}{\text{I hope this helps !}}}}}[/tex]
♥️ [tex]\large{\textcolor{red}{\underline{\texttt{SUMIT ROY (:}}}}[/tex]
