The Harrier Jump Jet is a fixed wing military jet designed for vertical takeoff and landing (VTOL). It is capable of rotating its jets from a horizontal to a vertical orientation in order to takeoff, land and conduct horizontal maneuvers. Determine the vertical thrust required to accelerate an 8600-kg Harrier upward at 0.40 m/s/s

Answers

Answer 1

Vertical thrust = 8600 kg x 0.40 m/s/s = 3440 N


Related Questions

The gravitational force between two bodies varies inversely as the square of the distance between them. If the force between two bodies is 18 N when the distance between them is 10 km, find the fource between the bodies when the distance between them is 7.5 km.

Answers

The statement states that the force between both the bodies at a distance of 7.5 km equals F = 32 N.

What is gravitational force?

This force that earth applies to a body is referred to as gravitational force. Its down motion of water in the river, the downwards motion if water in a stream, or an upwards motion of a ball being thrown are examples of motion brought on by gravitational influence.

Briefing:

F = k/d²  where k is the inverse variation's constant.

18 N = k / (10 km)²

18 N = k / 100 km²

k = (18 N) (100 km²)

k = 1800 (N)(km²)

F = ?

d = 7.5 km

k = 1800 (N) (km²)

F = 1800 (N)(km²) / (7.5 km)²

F = 1800 (N) (km²) / (55.25 km²)

F = 32 N

To know more about gravitational visit:

brainly.com/question/12528243

#SPJ4

An air-filled cavity for producing electromagnetic standing waves has two parallel, highly conducting walls separated by a distance L. One standing-wave pattern in the cavity produces nodal planes of the electric field with a spacing of 1.50 cm. The next-higher-frequency standing wave in the cavity produces nodal planes with a spacing of 1.25 cm. What is the distance L between the walls of the cavity?

Answers

The distance between the wall of the cavity is 7.5 cm

Distance is the length of a space between two points at rest or in motion.

It has the SI unit as meter denoted by letter 'm'.

Since the waves are travelling within two parallel, highly conducting walls, i.e. both the ends are rigid and closed, the general formula for the distance (L) between both closed ends is (n+1) λ/2

for n = 0, λ/2 = 1.5 cm

λ = 3.0 cm

for λ(n+1/2) = 1.25

λ(n+1) = 2.5

(n + 1) * 1.5 = (n + 2) * 1.25

n = 4

L = (n+1) λ/2

L  = (4+1) 3/2

L = (5) * 3 / 2

L = 7.5 cm

The distance L between the walls of the cavity is 7.5 cm.

To know more about distance,

https://brainly.com/question/16977761

#SPJ4

for the following surface, what is the minimum number of area vectors would you need to fully describe the area?

Answers

Only 1 area type of vector is necessary as the given surface is flat and the area vector must point either +x or -x-direction only. Option(2) is correct.

According to triangle regulation of vector addition minimal 3 coplanar vectors are had to get 0 resultant. We understand that best triangle is closed determine of minimal facet, Sides of triangle constitute vector, So the minimal range of unequal vectors whose vector sum may be 0 is 3.

Two vectors may have most cost while they're in identical direction, i.e. the perspective among them is 0°. And may have minimal cost while they're simply in contrary direction, i.e. perspective among them is 180°. Polygon described as a closed aircraft determine, having 3 or greater immediately aspects. So, the minimal range of the facet in a polygon is 3. So, a polygon with a minimal range of aspects is known as triangle.

To learn more about surface, refer: brainly.com/question/16519513

#SPJ4

Correct Question:

For the following surface, what is the minimum number of area vectors would you need to fully describe the area?

the wires of a toaster carry electrical current between the electrical outlet and the toaster. the wires inside the toaster also carry electrical current. during its operation, the wires inside the toaster get hot enough to glow, yet the wires to the outlet do not. list some factors that might determine how hot a wire will get when it conducts electricity. answer:

Answers

Some factors that might determine how hot a wire will get when it conducts electricity is Current, Material and Ambient temperature.

Resistance of the wire: The resistance of a wire determines how easily electricity can flow through it. Wires with higher resistance will tend to get hotter when conducting electricity because they resist the flow of current more than wires with lower resistance.

Current: The amount of current flowing through the wire can also affect how hot it gets. Higher current means more electrons are flowing through the wire, which can cause it to heat up more.

Length and diameter of the wire: The length and diameter of the wire can also affect how hot it gets. Longer wires or wires with a larger diameter will tend to have lower resistance, which means they will conduct electricity more easily and may not get as hot as shorter or thinner wires.

Material: The material of the wire can also play a role in how hot it gets. Different materials have different electrical conductivity and resistance properties, which can affect how hot the wire gets when conducting electricity.

Ambient temperature: The ambient temperature of the environment in which the wire is located can also influence how hot it gets. If the ambient temperature is higher, the wire may heat up more quickly due to increased thermal energy.

To know more about  electricity visit : https://brainly.com/question/12791045

#SPJ4

Which of the models predict that galaxies should be getting farther apart now? (Keep in mind that now is located at at time=0years on the graph.)

Answers

According to the accelerating, coasting, critical, and recollapsing theories, galaxies should be separating further apart right now.

On Earth, how many galaxies are there?

There were about 10,000 galaxies in this little area of the sky, all varying in size and form. Astronomers estimated that there are between 100 as well as 200 billion civilizations by multiplying this figure by how many times this little area of sky might fit into in the entire sky.

Exist any galaxies that have died?

Not one or 2, but as many as six galaxies that are no longer active in star-birthing have been discovered by the Hubble Space Telescope. Travelling to the past to a time when the cosmos was a few billion years old.

To know more about galaxies visit:

https://brainly.com/question/14169426

#SPJ4

Chapter 9 Chapter Review
297
6. The starting line of a cross country foot race is at the
bottom of a hill. Which form(s) of mechanical energy of
the runners will change when the starting gun is fired?
Kinetic energy only
a.
b.
Potential energy only
1
c.
Both kinetic and potential energy
d. Neither kinetic nor potential energy
02 Simple Machines

Answers

Answer:

c. Both kinetic and potential energy

Explanation:

When the starting gun is fired at the beginning of a cross country foot race, the runners will begin to move from a stationary position at the bottom of a hill. This movement will result in a change in both their kinetic energy and potential energy.

Kinetic energy is the energy of motion, and it will increase as the runners accelerate from a stationary position and begin moving at a faster speed.

Potential energy is energy stored in an object due to its position or shape. The runners at the starting line have potential energy due to their position at the bottom of a hill. As they begin to move upward, their potential energy will decrease as they move further away from the ground.

Therefore, both kinetic and potential energy will change when the starting gun is fired at the beginning of a cross country foot race.

when striking, the pike, a predatory fish, can accelerate from rest to a speed of 4.0 m/s in 0.14 s .

Answers

The acceleration of the predatory fish is 28.57 m/s².

What is the acceleration of predatory fish?

The acceleration of the predatory fish is the rate of change of velocity of the predatory fish with time.

Mathematically, the formula for acceleration is given as;

a = Δv / Δt

where;

Δv is the change in velocity of the predatory fishΔt is the change in time of motion of the predatory fish

The given parameters include the following;

the change in velocity of the predatory fish = 4 m/sthe change in time of motion of the predatory fish = 0.14 s

a = (4 m/s) / (0.14 s)

a = 28.57 m/s²

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

The complete question is below:

when striking, the pike, a predatory fish, can accelerate from rest to a speed of 4.0 m/s in 0.14 s . find the acceleration?

(100 Points) Three resistors of 100, 40.0, and 10.0 Ohms are in series with a 24.0 V power supply. What is the voltage drop across the 40.0 Ohm resistor?
(Unit= V)

Answers

Answer:

  6.4 V

Explanation:

You have a series circuit of three resistors and a 24 V power supply. You want to know the voltage across the 40 Ω resistor, when the other two resistors are 100 Ω and 10 Ω.

Voltage drop

The fraction of total voltage in a series circuit that is dropped across any resistor is the ratio of that resistor value to the total resistance in the circuit. The voltage drop across a 40 Ω resistor in a circuit with a total resistance of 150 Ω is ...

  (24 V)(40/150) = 32/5 V = 6.4 V

gfcis operate by comparing the amount of current flowing in the ___ circuit conductors of a 240-volt circuit. when these are not the same, the gfci device trips.

Answers

gfcis operate by comparing the amount of current flowing in the outlet circuit conductors of a 240-volt circuit. when these are not the same, the gfci device trips.

What is gfcis ?

This refers to an electrical safety device that immediately breaks an electrical circuit with leakage current to the ground. It protects equipment and reduces the risk of serious harm from an ongoing electric shock. It is also known as a residual-current device/ residual-current circuit breaker or ground fault circuit interrupter.

Learn more about ground fault circuit interrupter on

https://brainly.com/question/29821546

#SPJ1

what happens when light passes from air into water? does it slow down; when light travels from glass to air; when light travels from air to glass the ray of light bends; when light travels from air to glass what happens to the speed; when light travels from air to water does wavelength change; what happens when light travels from air to water; light refraction; what happens to a light ray when it travels from water into air?

Answers

When light passes from air into water, it slows down and bend towards the normal.

When light travels from glass to air its speed increases and bend away from the normal.

When light travels from air to glass, speed decreases.

When light travels from air to water wavelength increase as refractive index of air is less than the water.

When light travels from water into air, its speed increases and it bend away from the normal.

Refraction is defined as the bending of light at the surface of two media when it changes medium of propagation.

When light passes from an optically rarer medium to optically denser medium. its speed decreases and it bend towards the normal. When light passes from the denser medium to a rarer medium, its speed increases and it bends away from the normal.

To know more about refraction here

brainly.com/question/14760207

#SPJ4

A gas is compressed at a constant pressure of 0.800 atm from 9.00 L to 2.00 L. In the process, 400 J of energy leaves the gas by heat.Requirements:(a) What is the work done on the gas?(b) What is the change in its internal energy?

Answers

The gas has undergone work of 567.42 J, and the internal energy has changed by 167.42 J.

What exactly is inner energy?

It is the summation of all the potential and kinetic energy of the atoms and molecules that make up the material that is represented in the system.

Briefing:

As given in the problem a gas is compressed at a constant pressure of 0.800atm from 9.00 L to 2.00 L. In the process, 400 J of energy leaves the gas by heat.

1 atm = 101325.00 N/m²

0.800 atm = 0.800×101325.00

                 =81060 N/m²

The work done by the gas under constant pressure

W = P×( V₂ -V₁)

   =81060×(2- 9)×10⁻³

  = - 567.42 J

A negative sign represents that work is done on the gas

By using the first law of the thermodynamics

ΔQ = ΔU +W

-400 = ΔU - 567.42

ΔU = 167.42 J

Thus, The work done on the gas is 567.42 J and the change in the internal energy would be  167.42 J

To know more about internal energy visit:

https://brainly.com/question/11278589

#SPJ4

what is the magnetic field amplitude of an electromagnetic wave whose electric field amplitude is 12 v/m ? express your answer to two significant figures and include the appropriate units.\

Answers

The magnitude of the amplitude of the ⁸magnetic field in the Electromagnetic wave is 36 x 10⁸ T.

The energy of an electromagnetic wave in terms of electric field is given by,

E = 1/2e₀E²

Where,

e₀ is the permittivity of free space,

E is the the electric field amplitude.

The energy of an electromagnetic wave in terms of magnetic field is given by,

E = B²/2u₀

Where,

u₀ is the permeability of free space,

B is the the Magnetic field amplitude.

Both these energies are equal hence,

We can write,

E/B = √e₀u₀

Putting the standard values of e₀ and u₀ and E,

B = 12 x 3 x 10⁸

B = 36  x 10⁸ T

So, the amplitude of the magnetic field is 36 x 10⁸ T.

To know more about Electromagnetic waves, visit,

https://brainly.com/question/25847009

#SPJ4

Which may result an increase in friction?; Which may result from an increase in friction decreased traction?; Which may result from an increase in friction Brainly?; How can rolling friction be increased?

Answers

Considering both the object's mass and the surface's coefficient of friction In relation to heat energy, friction is a resistive force.

What are heat energy and what is its unit?

According to physics, heat is a type of energy that moves from a hotter body to a cooler one or it is the movement of atoms and molecules within a substance; the faster the atoms or molecules move, the more energy the substance has. The SI unit of heat is the joule (J).

What are the top ten heat sources?

Natural gas, propane (Mp), oil, coal, firewood, electricity, water heaters, ground source heat pumps, and solar energy are just a few of your many options for heating energy sources. Offering goods that are both extremely energy-efficient and wise investments is a goal of Radiantec.

To know more about  heat energy  visit:

https://brainly.com/question/25384702

#SPJ4

A roller-coaster car may be represented by a block of mass 50.0 kg . The car is released from rest at a height h = 60.0 m above the ground and slides along a frictionless track. The car encounters a loop of radius R = 20.0 m at ground level, as shown. As you will learn in the course of this problem, the initial height 60.0 m is great enough so that the car never loses contact with the track. Find the kinetic energy K of the car at the top of the loop. Find the minimum initial height hmin at which the car can be released that still allows the car to stay in contact with the track at the top of the loop.

Answers

The answer is 9800 J = + K.

Solution:

For this we can use energy conservation, the block starts at h=60 m, and at the top of the loop it is at h=2 x 20 = 40 m

Then:

E1 = E2

[tex]mgh_1=mgh_2+K[/tex]

[tex]mgh_1=mgh_2=+K[/tex]

[tex]50\cdot 9.8(60-40)=+K[/tex]

[tex]9800\, J=+K[/tex]

The min-height property defines the minimum height of the element. If the content is less than the minimum height, the minimum height is applied. Minimum Height means the vertical distance measured from the slope as defined herein to the lower limit of the sign or sign structure. Sample 1 Sample. Minimum height means the minimum building height permitted on a property or part of a property.

Learn more about Kinetic energy here:- https://brainly.com/question/25959744

#SPJ4

The brakes of a 1000kg car exert 3000N. How long will it take the car to come to a stop from a velocity of 30meter per second and how far will the car travel during this time?

Answers

If the car is traveling at 30 meters per second, it will take 10 seconds to halt. A 1,000 kilogram car's brakes produce 3000 N of force.

Which is greater, velocity or speed?

In contrast to speed, velocity represents the direction and speed of an object's motion since it follows a path. As a result, velocity is a vector, whereas speed is a scalar.

What distinguishes speed from acceleration?

The rate at which a displacement varies is measured by its velocity. Accelerated speed changes are experienced. Its velocity is an vector quantity since it is composed of two parts. Acceleration is also a vector quantity since it is simply the rate about which velocity varies.

To know more velocity  about visit:

https://brainly.com/question/18084516

#SPJ1

what is the buoyant force acting on the block?; what is the weight wb of the ball?; what is the density of the unknown liquid rhounknown ?; what is the pressure p2 of the fluid at the bottom of the beaker; what lift force must the shark's fins provide if the shark is swimming in seawater?; what is the force that her fist exerts on the top of the bottle?; rank these blocks on the basis of the scale reading when the blocks are completely submerged.

Answers

The weight of the liquid the object displaces determines the buoyant force that pulls an object upward when it is floating (or submerged).

Does the buoyant force pushing against the block exceed, fall short of, or be equal to its weight?

The idea behind Archimedes' principle is that the weight of the fluid that an object displaces is equal to the buoyant force acting on it.

Is an object under the influence of buoyancy?

A fully or partially submerged object is subject to an upward force known as the buoyant force. Upthrust is another name for this thrust upward. A body that is partially or completely submerged in a fluid appears to lose weight, or to be lighter, due to the buoyant force.

To know more about buoyant force visit :-

https://brainly.com/question/21990136

#SPJ4

an ammonia refrigeration cycle involves the conversion of 0.93 kg of liquid ammonia into vapor every minute at the boiling-point temperature.

Answers

The rate at which ammonia absorbs energy, according to the question, is 32166.7 W.

What does physics mean when it refers to temperature?

Temperature is a unit used to represent hotness or coolness on any of a range of scales, including F and Celsius. According to temperature, heat energy will naturally move from a hotter (body with a temperature higher) to a colder (body with a lower temperature) (one at a lower temperature).

Briefing:

Heat of evaporation (L) is equal to 1369.5*10³ J/kg.

Mass (m) = 1.41 kg

Formula:

Q = m*L = 1.41 * 1369.5*10³

Q = 1.93 * 10⁶ J

Finally, the rate of energy absorption by ammonia is:

Q/t = 1.93 * 10⁶/60

= 32166.7 W

To know more about Temperature visit:

https://brainly.com/question/28082597

#SPJ4

The complete question is-

10 of 10 An ammonia refrigeration cycle involves the conversion of 1.41 kg of liquid ammonia into vapor every minute at the boiling-point temperature. At what rate does the ammonia absorb energy?

What will happen when you throw paper airplane in the air?; What forces are acting on a paper airplane when you throw it?; What type of friction does a paper airplane experience as it flies through the air?; Is throwing a paper airplane a projectile motion?

Answers

When we throw paper airplane in the air, it will stop after sometimes due to friction and fall on ground due to gravity.

Physical friction is all around us. Static friction is the resistance to an object moving along a path. Finally, explain it with a simple example. Consider the common activity we all engage in: walking. While working, we are constantly in contact with the floor. The fact that friction operates in the opposite direction from relative motion is one important concept to be aware of in order to minimize friction. This phenomenon might be helpful for slowing down the action until it eventually stops.

To know more about  Friction visit : brainly.com/question/28356847

#SPJ4

An old campfire is uncovered during an archacological dig. Its charcoal is found to contain less than 1/1000 the normal amount ofC. Find the minimum age (in years) of the charcoal. Carbon-14 has a half-life of 5730 years which means half of it will be gone aftler 5730 years. You may find the equality 210- 1024 to be useful, Numeric : A numeric value is expected and not an expression. min

Answers

Answer:

57104 yrs old

Explanation:

Its charcoal is found to contain less than 1/1000 the normal amount ofC-14.

1/1000 = (1/2)^n     n = number of half lives  = 9.965 half lives

9.965 half lives * 5730 yrs/half life = 57,104 years

A powerful motorcycle can produce an acceleration of 4.00 m/s2 while traveling at 90.0 km/h. At that speed the forces resisting motion, including friction and air resistance, total 450 N. (Air resistance is analogous to air friction. It always opposes the motion of an object.) What is the magnitude (in N) of the force the motorcycle exerts backward on the ground to produce its acceleration if the mass of the motorcycle with rider is 250 kg

Answers

Answer:m/s2 wou

Explanation:

primary motor neurons of the direct motor pathway issue impulses for control of skeletal muscles; primary motor neurons of the indirect motor pathway issue impulses for control of skeletal muscles.

Answers

Primary motor neurons of the direct motor pathway produce impulses that cause skeletal muscles to contract voluntarily, whereas primary motor neurons of the indirect motor pathway produce impulses that cause skeletal muscles to contract involuntarily.

What is the main pathway for movement?

For higher motor neuronal signals coming from the cerebral cortex and from basic brainstem motor nuclei, the motor route, also known as the pyramidal tract or the corticospinal tract, acts as the motor pathway. In the corticospinal tract, upper and lower motor neurons are present.

Which route is responsible for the head's skeletal muscles?

The cranial nerves' higher motor neurons make up the corticobulbar tract. The corticobulbar system, which terminates on motor neurons, regulates the muscles of the face, head, and neck.

To know more about muscles visit:-

https://brainly.com/question/9883108

#SPJ4

9. after a nice dinner around the campfire on a camping trip, you and a friend decide to get away from the fire to observe the stars. as you get farther and further away, you see the brightness of the fire:

Answers

Decrease as the distance squared  after a nice dinner around the campfire on a camping trip, you and a friend decide to get away from the fire to observe the stars. as you get farther and further away.

The amount of thermal energy that a huge fire has transferred is more than that of a little fire, thus you must stand closer to a small fire to feel the same warmth you do when you are farther away. The reaction generates a lot of thermal energy in a huge fire. Less thermal energy is released from the reaction in a tiny fire.

When the temperature rises, a type of energy called thermal energy is produced. The amount of thermal energy is directly inversely proportional to the object's change in temperature. Thermal energy takes the form of heat.

To know more about distance

https://brainly.com/question/14328097

#SPJ4

Two 460g blocks of wood are 2.0 m apart on a frictionless table. A 12g bullet is fired at 400m/s?
toward the blocks. It passes all the way through the first block, then embeds itself in the second block. Th e speed of the first block immediately after ward is 6.2m/s.
What is the speed of the second block after the bullet stop

Answers

When two 460g blocks of wood are placed on a frictionless surface, 2.0 m apart, and the bullet stops, the second block moves at a speed of 2.5 m/s. 400m/s is the velocity of a 12g bullet.

comparison of frictionless synonyms continuous creamy easy effortless flat fluid gentle glossy mild tranquil polished serene

M = 460 g for the block's mass

Blocks are separated by x metres.

The bullet's weight is 12 g.

initial bullet speed = u = 400 m/s

final block velocity was 6.2 m/s.

The bullet's speed as it travels through the first block will initially be determined as follows:

mv + mu = Mv

(12)(400) = 12v+460(6.2) (6.2)

v = 162 m/s

V' = m/(m+M)*162

V' = 12/(12+460) *100

V' = 0.0254*100

V' = 2.5m/s

Learn more about frictionless here

https://brainly.com/question/13483826

#SPJ4

which of the following is Not a load in an electrical circuit. a. bulb b. electric fan c. oven d.wire​

Answers

I am pretty sure that it's the oven

How did ibn Sina changed the science of forces

Answers

Ibn Sina, also known as Avicenna, was a Persian polymath who made significant contributions to a wide range of fields, including philosophy, medicine, and science. However, his work in the field of the science of forces is not as well known as his contributions to other areas.

Ibn Sina's most significant contributions to the science of forces were in the field of mechanics, the study of motion and the forces that cause it. In his work, he described the concept of momentum, which is the product of an object's mass and velocity, and he also made important contributions to the study of the motion of projectiles.

However, it is important to note that while Ibn Sina made some important contributions to the science of forces, his work in this field was not as influential as the work of other scientists and philosophers, such as Sir Isaac Newton, who made more significant contributions to the development of the laws of motion and the theory of universal gravitation.

a spherical balloon has a radius of 7.55 m and is filled with helium. the density of helium is 0.179 kg/m3, and the density of air is 1.29 kg/m3. the skin and structure of the balloon has a mass of 970 kg . neglect the buoyant force on the cargo volume itself.

Answers

The total lift of the balloon is   1,411.74 kg

Step 1: Calculate the volume of the balloon:

V = 4/3πr^3

V = 4/3π*7.55^3

V = 1,630.64 m^3

Step 2: Calculate the mass of the helium:

m_He = V*d_He

m_He = 1,630.64 m^3*0.179 kg/m^3

m_He = 291.33 kg

Step 3: Calculate the mass of the air displaced by the helium:

m_air = V*d_air

m_air = 1,630.64 m^3*1.29 kg/m^3

m_air = 2,090.41 kg

Step 4: Calculate the total lift of the balloon:

Lift = m_He + m_air - mass_skin_structure

Lift = 291.33 + 2,090.41 - 970

Lift = 1,411.74 kg

For more questions like Lift click the link below:

https://brainly.com/question/14015428

#SPJ4

Which statement about the transfer of thermal energy is correct?

Answers

When two items come into close proximity, thermal energy moves from the warmer object (which has faster-moving particles) to the colder object (with slower-moving particles).

Which thermal energy transfer direction is correct?

First, heat is transferred from the lower-temperature object to the higher-temperature object, then it is transferred back to the lower-temperature object, and so on, until the objects are in thermal equilibrium.

What is the true statement concerning heat radiation?

Thermal radiations have a frequency range in the infrared and are electromagnetic in nature. All bodies that have an absolute temperature that is not zero emit these. Since they are electromagnetic, heat radiations can bounce off of them and move through space at the speed of light. All of the statements are true.

To know more about thermal energy visit :-

https://brainly.com/question/11278589

#SPJ4

According to the Bohr model of a hydrogen atom, the frequency of light radiated by an electron moving from an orbit n1 to an orbit n2corresponds to the energy level difference betweenn1 and n2 ofE=E0(1n21?1n22),whereE0=?meZ2e432?2?20?2,and where me is the electron mass, Z is the atomic number, e is the magnitude of the electron charge, ?0 is the permittivity of free space, and ?is Planck's constnt divided by 2?. In the case of hydrogen (Z=1) E0=?13.6eV.Part A: Find the frequency of light f radiated by an electron moving from orbit n1=2 to n2=1 inside of a He+ ion.Part B: In the Bohr model of hydrogen, the radius of the nth orbit is defined asrn=a0n2Z,wherea0=4???2mee2=5.29

Answers

9.86*1015 HZ, 2.65*10-11 m, and 40.8 eV of energy were released during the transition from phase 2 to phase 1. In accordance with the hydrogen atom's Bohr model.

A hydrogen atom is an atom belonging to the element hydrogen in chemistry. One positively charged proton and one negatively charged electron are both present in the electrically neutral atom and are held to the nucleus by the Coulomb force.

The energy released during the change from 2 to 1 is given by

E = Eo(1/n^2 - 1/na^2) (2)2(-13.6)(1/2^2-1) = 40.8eV

The frequency is calculated as follows:

f = E/h f = 9.86*1015 HZ

rn = Ao*n2/Z = (5.29*10-11)(1)/2 = 2.65*10-11m is the orbit's radius.

Learn more about hydrogen here

https://brainly.com/question/14805244

#SPJ4

in free fall the initial velocity of the object is always; inertia keeps the ball moving horizontally. the force of gravity acts on the object, causing; what is free fall in physics; what is the acceleration of an object in free fall; in the absence of air resistance, objects fall at constant; forces acting on a falling object; how does air resistance affect falling objects; free fall description

Answers

All objects descend toward the Earth's surface with a constant acceleration of g start text, g, end text in the absence of air resistance. g = 9.8 m s 2 g applies to Earth's surface.

When something descends without any air resistance, that is called free fall.

Objects that are claimed to be falling freely do not actually experience much air resistance; instead, gravity is the only force acting on them as they fall. Regardless of their mass, all objects will fall with the same rate of acceleration under these circumstances.

What is an object's constant acceleration in free fall?

The acceleration of a free falling object can be solved using algebra. The acceleration is constant and equal to the gravitational acceleration g, which at sea level on Earth is 9.8 meters per square second.

To know more about constant acceleration visit:-

https://brainly.com/question/29349889

#SPJ4

make sure the piston screw is still loosened (counterclockwise). move the piston to the lowest position possible by releasing the air by disconnecting the pressure sensor tube, then re-attaching. now put a 100g or 200g mass on top of the piston platform and predict what will happen when you immerse the gas bulb in hot water. do the experiment, note the results and explain them in terms of the first law and the work done on or by the mass. again, think of whether this process is a constant pressure or constant volume one. (10 pts)

Answers

In this given experiment the piston rises a little bit.

Piston compressors, also known as reciprocating compressors, piston air compressors work with the help of large  pistons driven by a crankshaft.These are the more traditional type of compressor, with a lot of moving parts. This design characteristic contributes to some of a piston compressor’s biggest downsides because it increases friction and heat. Screw compressors use two helical screws to compress the air, but the key difference is that the screws don’t touch each other.Since there’s no contact, there’s less wear and tear, reducing maintenance needs for screw compressors and making them more reliable. This mechanism provides other benefits for heat production, noise level, size, efficiency and oil content in output air.One of the most valuable benefits of a screw compressor is the ability to run one continuously. Since there’s less risk for overheating and wear, it can run without a duty cycle.

To know more about compressors visit:

https://brainly.com/question/14689866

#SPJ4

Other Questions
invasion of the body snatchers was a remake of a 1950s sci-fi film but has little in common with the original beyond the title. determine the theoretical yield of hcl if 60.0 g of bcl3 and 37.5 g of h2o are reacted according to the following balanced reaction. a possibly useful molar mass is bcl3 117.16 g/mol and h2o is 18.02 g/mol. if the hypotenuse of a right trinagle is 2cm and one leg is 3 cm the exact length of the other leg is write the sentence as an equation 22 equals a reduced by 295 under which circumstances may an updated entry be added to a patient's health record in place of a complete history and physical? Which department measures and provides financial information about an organization primarily for its decision markets, investors, and taxing authorities? after you finish giving a presentation, an audience member asks your team for additional information on your topic. your coworker is answering the question thoroughly, but you notice that the rest of your audience has tuned out. how can you re-engage your audience? select all that apply. the belmont report principle of beneficence requires that: the data from an independent-measures research study produce a sample mean difference of 12 points and an estimated standard error of 4 points.if there are n how would you know if a grignard reagent has reacted with water? (select all that apply) how would you know if a grignard reagent has reacted with water? (select all that apply) a bright yellow precipitate will form a white precipitate will form the reaction mixture will turn purple the reaction mixture will solidify What is 1 1/4 as a improper fraction? Has audit quality improved since the passage of Sarbanes-Oxley Act (SOX)? Which of the following statements is true with regards to audit quality since the passage of SOX?A) the frequency of financial statement restatements has increased since SOXB) PCAOB audit engagement findings continue to document a high level of audit deficienciesC) Finally, the auditing professions agrees on the definition of audit qualityD) no progress has been made on the definition of what are called "Audit Quality Indicators" since SOX Determine whether the correspondence is a function. Is this correspondence a function? Yes No What is the difference between 5 hundreds 6 tens and 4 tens When the maya captured commoners, they typically enslaved them for hard labor while this group almost always became sacrificial victims.a.all prisoners of war.b.drafted commoners who 'lost' the lotteryc.slaves who were old or no longer valuabled.captured nobility from other areas the graph of f(x) = x2 is translated to form g(x) = (x 5)2 + 1. Which graph represents g(x)? what financial variables or ratios you consider essential to compare companies' financial performance What is the volume of the sphere 3,3 Do network effects help or hurt innovation? Why? If you were competing in a market where network effects exist, what strategies would be available for you succeed? the theory that attempts to explain behavior change by suggesting that behavior with positive consequences tends to be repeated while behavior with negative consequences tends not to be repeated, is called