the heating curve for a sample of pure ethanol is provided above. the temperature was recorded as a 50.0 g sample of solid ethanol was heated at a constant rate. which of the following explains why the slope of segment t is greater than the slope of segment r? a the specific heat capacity of the gaseous ethanol is less than the specific heat capacity of liquid ethanol. b the specific heat capacity of the gaseous ethanol is greater than the specific heat capacity of liquid ethanol. c the heat of vaporization of ethanol is less than the heat of fusion of ethanol. d the heat of vaporization of ethanol is greater than the heat of fusion of ethanol.

The pH of hydroxide ion be if the hydrogen ion concentration was 1 x 10-6 m is 8.

You need to know the hydronium ion concentration in moles per litre to determine the pH of an aqueous solution molarity. The equation pH = - log [H3O+] is then used to determine the pH. Seven is the neutral pH. An increase in pH above 7 indicates an increase in alkalinity, whereas a fall in pH below 7 indicates an increase in acidity (hydrogen ions) (hydroxyl ions). Each pH unit corresponds to a concentration change of 10 times.

Total H+ is 1x 10–6M;

pH = -log[H+] =6; pOH = 14–6 = 8

(OH-)=3.2 x 10-8 M

So, pOH=-log(OH-)

=-log(3.2 x 10-8) => 7.49

Pure water (H20) has a pH of 7 at 25 °C, but when exposed to atmospheric carbon dioxide, this equilibrium results in a pH of about 5.2.

Learn more about hydroxide here:

brainly.com/question/25883474

#SPJ4

As a result, chromium has a specific heat of 20.79 J/g C.

Metals are bright, opaque materials that efficiently conduct electricity and heat. Most metals are malleable and ductile, and they frequently have a higher density than other elements. When newly treated, polished, or broken, a material takes on a bright look and conducts heat and electricity reasonably well. Generally speaking, metals are malleable and ductile.

Electrons, neutrons, and protons are the building blocks of metals. The number of protons in an atom allows scientists to distinguish between atoms of different elements. The earth's crust contains around 25% metals.

The following formula is used to determine the heat(Q).

Q = m(s)(ΔT)

Here, m denotes the mass of the body, s denotes its specific heat, and T is the temperature change.

As a result, the heat lost by titanium metal equals the heat received by the water in the calorimeter.

(msΔT)Titanium= (msΔT)Water

Adding the indicated numbers to the equation above

24.26 x s x 98.3-25.6 = 82.3 x 23.3 x 25.6-23.3

s = 20.79 J/g C

Consequently, titanium has a specific heat of 20.79 J/g C.

To know more about Metals visit:

https://brainly.com/question/28650063

#SPJ4

The six carbon compound formed when carbon dioxide and RuBP react immediately breaks down into two molecules of 3-phosphoglycerate, the Calvin cycle's first stable product.

Carboxylation is a chemical reaction that produces a carboxylic acid by exposing a substrate to carbon dioxide. Decarboxylation is the inverse reaction. Carbonylation (carboxylation) is the reaction in which an organic compound reacts with carbon monoxide, and carbonylation refers to reactions in which carbon monoxide is introduced into organic and inorganic compounds. Decarboxylation is a reaction in which carboxylic acids remove a carbon atom from a carbon chain. Carboxylation is a completely reversible process that occurs as the first chemical step in photosynthesis and involves the addition of CO2 to the compound.

Here,

When carbon dioxide and RuBP react, the six carbon compound formed immediately degrades into two molecules of 3-phosphoglycerate, the Calvin cycle's first stable product.

To know more about carboxylation,

https://brainly.com/question/30160762

#SPJ4

Additionally assuming that your perceptron will employ an activation function based on a straightforward step function with a threshold value of 0.5, resulting in a no-value condition where it will not fire.

An artificial neuron is known as a perceptron. The simplest Neural Network is this one. The foundation of machine learning is comprised on neural networks. The perceptron is a technique for supervised learning for binary classifiers in machine learning. Using a vector of integers as input, a binary classifier is indeed a function that can determine whether or not the input belongs to a particular class.

The data is often divided into two categories using perceptron. It also goes by the name Linear Binary Classifier for this reason. If you want to better comprehend machine learning offline as well. The bias term is a useful feature since it provides a second model parameter (in addition to weights) that may be adjusted to optimise the model's performance on training data. The bias weight's input value can be changed, and the default value is 1.

To know more about Perceptron visit:

https://brainly.com/question/29671015

#SPJ4

The molar mass of the protein is  13963.42 g/mol.

osmotic pressure (w 2 )=0.166g, R=0.075 Latm/(kmol), T= 21K =10.00 mm of Hg, which equals 7.50 /10.00 =0.0175 atm.

Solution volume: 0.01L

Making use of the formula M 2 = V W /2 RT​

We obtain M 2 = 0.075*0.01*0.01 / 0.075*21 = 13963.42 g/mol.

The molar mass of the protein is  13963.42 g/mol.

To learn more about molar mass refer to:

https://brainly.com/question/24191825

#SPJ4

Molarity is a unit of concentration that expresses the number of moles of solute per liter of solution. To calculate the molarity of a solution made by diluting a concentrated solution, you can use the following formula:

Molarity = moles of solute / liters of solution

First, you have to calculate the number of moles of solute in the original solution, you can use the formula:

moles of solute = molarity x liters of solution

moles of solute = 18.0 M x 0.3 L = 5.4 moles

Then, you can use this value to calculate the molarity of the dilute solution:

Molarity of dilute solution = moles of solute / liters of solution

Molarity of dilute solution = 5.4 moles / 3.5 L = 1.54 M

So, the dilute solution has a molarity of 1.54 M.

Learn more about calculation the molarity of a solution here:

https://brainly.com/question/15802995

#SPJ4

According to the stated information, the pressure inside the container at this temperature is 5.59 atm.

Numerous aerosol sprays include dangerous substances like formaldehyde and xylene, which are used to protect anatomical evidence in jars. In addition to being exceedingly dangerous for people, kids, and household pets, these toxic substances now include carcinogens and toxins.

2.30 g/ 44.097 g/mol (or 0.052 moles of propane)

V = 0.250

T = 25 + 273 = 298 K as a result.

p = nRT / V = 0.052 x 0.0821 x 298 / 0.250 =5.08 atm

At STP 1 mole => 22.4 L

Volume = 0.052 x 22.4 =1.164 L

130 F => 54.4 °C => 327.4 K

p = nRT / V = 0.052 x 0.0821 x 327.4 / 0.250 = 5.59 atm

To know more about Aerosol visit:

https://brainly.com/question/28853452

#SPJ4

The compound that contains an ion with a +3 charge is FejPz. So option D is correct.

FejPz is an Iron(III) Phosphide, and the Iron ion in it has a +3 charge. Iron can have multiple oxidation states and the +3 oxidation state is one of them.

NOa is Nitrite, Nitrite is a neutral compound and doesn't contain any ion with a +3 charge

Mn_Oa is Manganese (IV) oxide, and Manganese in it has a +4 charge.

BaCIO3 is Barium Carbonate which is a neutral compound as well and doesn't contain any ion with a +3 charge.

Therefore, the compound FejPz is the one containing an ion with a +3 charge.

To know more about chemical compounds:

https://brainly.com/question/26487468

#SPJ4

A five-carbon unbranched alkene with a single double bond contains hydrogen atoms. hence, there are five carbon atoms in all. One double bond is also present. Currently, hydrogen is usable. We now have two hydrogens.

In the process of photosynthesis, plants split water into nitrogen and oxygen with the help of sunlight, and then mix the generated hydrogen with atmospheric carbon dioxide to produce carbohydrates.

Many of the factors implicated in the pathophysiology and etiology of the metabolic syndrome and the diseases it is associated with have been linked to molecular hydrogen's ability to attenuate peroxidation, enhance cellular function, and decrease chronic inflammation5.

To know more about hydrogen visit:

https://brainly.com/question/29130026

#SPJ4

The relation between the two chemical species is isotopes, as they have the same atomic number (17) but different number of neutrons (18 and 20 respectively), based on the available question.

The relation between the two species is isotopes if they have the same number of protons but a different number of neutrons.

If they have the same number of neutrons but different number of protons then it is Isotones.

If they have the same number of protons and neutrons but different atomic number then it is Isodiaphers.

If they have the same atomic mass but different atomic number then it is Isobars.

Learn more about isotopes, isobars, isotones, and isodiaphers ;

https://brainly.com/question/11424432

https://brainly.com/question/4083888

The correct question can be:

Two atoms A and B have the following nuclear composition: Atom A consists of 17 protons, 18 neutrons, and 17 electrons, and atom B consists of 17 protons, 20 neutrons, and 17 electrons

What is the relation between the two chemical species?

a. Isobars

b. Isodiaphers

c. Isotopes

d. Isotones

Across the periodic table, the initial ionization energy fluctuates in a predictable manner. In groups, the ionization energy drops while rising from left to right during the course of a period.

Learn more about Ionization energy refer to :

https://brainly.com/question/20658080

#SPJ4

The balanced chemical equation for this reaction is 6CO2+6H2O+Δ→C6H12O6+6O2 that the reaction is balanced with respect to mass and charge .

A chemical is any substance that has a defined composition. In other words, a chemical is always made up of the same "stuff." Some chemicals occur in nature, such as water. Other chemicals are manufactured, such as chlorine (used for bleaching fabrics or in swimming pools).

Air, water, iron, gasoline, clothing, stones, furniture, plastics, plants, food are all composed of chemicals, some natural, some synthetic. Chemicals can be single chemical molecules, like water, or mixtures of different chemicals. Air is a mixture nitrogen, oxygen, water, carbon dioxide + other chemicals.

To know more about chemical visit

https://brainly.com/question/7160071

#SPJ4

Explanation:

Ionizable Amino Acids

Seven out of the twenty amino acids contain readily ionizable side chain groups. That means that at specific pH values, each side chain can participate in an acid-base reaction in which it can exchange a hydrogen atom with some other biomolecule. Since these side chains can form ions, that implies that they can also participate in forming ionic bonds. On top of these seven amino acids with ionizable side chains, all of the amino acids contain an ionizable alpha amino group and an alpha carboxyl group. The pKa value of each side chain group determines the pH value at which there will be equal concentrations of the acid and its conjugate base. The pKa value of the alpha amino group is 3.1 while the pKa value of the alpha amino group is 8.0. The pkA values of glutamic acid and aspartic acid are 4.1, the pKa of cysteine is 6.0, the pKa value of lysine is 8.3, the pKa value of lysine is 10.8, the pKa value of tyrosine is 10.9 and the pKa value of arginine is 12.5.

To find the percent composition of Carbon in a substance, you need to calculate the percent of the total mass that is made up of Carbon.

The first step is to add up the masses of all the elements in the substance to get the total mass:

2.59 g Carbon + 39.56 g Sulfur + 43.03 g Oxygen = 85.18 g

Next, divide the mass of Carbon by the total mass and multiply by 100 to get the percent of the total mass that is Carbon:

(2.59 g Carbon / 85.18 g) * 100 = 3.03% Carbon

So, the percent composition of Carbon in the substance is 3.03%.

Answer:

Assuming the container initially contains an ideal gas at 518.0 kpa at 298.15 k, the aluminium aerosol can will rupture when the internal pressure reaches 210.0 psi, whereas it will burst at 822.50 K.

Pressure is the force applied per unit area over the force perpendicular to an object's surface (symbol: p or P). The pressure as it relates to the air pressure around it is referred to as the gauge pressure. There are several different units used to express pressure. The behaviour of multiple  ideal gas under varied conditions is accurately approximated by the ideal gas law in thermodynamics. The Charle's Law, Boyle's Law, and T2 = (298.15*14.29)/5.18sT2 = 822.50K empirical laws are all combined in the Ideal Gas Equation.

Learn more about ideal gas here

https://brainly.com/question/28837405

#SPJ4

It would be more difficult for a ball bearing to fall through a beaker of hot honey than cold honey. This is because hot liquids are more viscous (thicker) than cold liquids, so the hot honey would provide more resistance to the ball bearing as it falls through.

Viscosity is a measure of a fluid's resistance to flow. Honey is a viscous liquid, which means it is thick and flows slowly. The viscosity of honey can be affected by temperature. As the temperature of honey increases, its viscosity decreases, which means it becomes thinner and flows more easily. Conversely, as the temperature of honey decreases, its viscosity increases, which means it becomes thicker and flows more slowly. So, hot honey is less viscous than cold honey.

Learn more about viscosity in brainly.com/question/13385698

#SPJ1

With sodium bromide and silver nitrate In this instance, sodium bromide (NaBr) is mixed with silver nitrate (AgNO3). The final product is white precipitate.

A drug called silver nitrate is employed during the cauterization procedure, which involves burning away skin in order to stop hemorrhage or stop an infection from spreading to a wound. Warts and granulation tissue (red, lumpy tissue covering a healing lesion) are other skin conditions that can be treated with it.

Contact with moisture causes the silver stick to work. When administered to wounds, potassium iodide sticks provide free substances to the tissue, which attach to tissue and clog blood vessels to produce an eschar.

To know more about silver nitrate visit:

https://brainly.com/question/29627918

#SPJ4

The Fe (Iron) element separates the and fusion processes according to of interaction energy per nucleon.

A bigger atom undergoes fission when a neutron smashes into it, causing it to excite , separate into two smaller atoms, also referred to as fission products. A chain reaction may be started by other neutrons that are also emitted. An enormous quantity of energy is produced when each atom divides.

By dissolving large, heavy atoms, like uranium, into smaller ones, like iodine, caesium, strontium, xenon, and barium, to mention just a few, fission produces energy. To create the heavier helium, fusion combines light atoms, such as the two hydrogen isotopes deuterium and tritium.

To know more about Fission visit:

https://brainly.com/question/1544488

#SPJ4

Part A: The strength of an electric field that will balance the weight of a proton is approximately 9.8 N/C (or 9.8 x 10^9 N/C).

Part B: The direction of an electric field that will balance the weight of a proton is upward.

Part C: The strength of an electric field that will balance the weight of a electron is approximately 9.8 x 10^16 N/C.

Part A: The weight of a proton is given by the equation F=mg, where F is force, m is the mass of proton and g is the acceleration due to gravity. The mass of proton is 1.67 x 10^-27 kg. So F = 1.67 x 10^-27 kg x 9.8 m/s^2 = 1.63 x 10^-26 N. The strength of an electric field required to balance the weight of a proton is the force acting on the proton divided by the charge of proton, which is approximately 9.8 x 10^9 N/C.

Part B: The weight of a proton is an upward force and the electric field that will balance this force will also be upward.

Part C: Similarly, the weight of an electron is given by the equation F=mg, where F is force, m is the mass of electron and g is the acceleration due to gravity. The mass of an electron is 9.11 x 10^-31 kg. So F = 9.11 x 10^-31 kg x 9.8 m/s^2 = 8.89 x 10^-31 N. The strength of an electric field required to balance the weight of an electron is the force acting on the electron divided by the charge of electron, which is approximately 9.8 x 10^16 N/C.

electric fields we must take into account that the charge of the proton is positive and the charge of electron is negative.

To know more about electric field click below:

brainly.com/question/8971780#

#SPJ4

Answer: the hotter the temperature the less solubility.

Explanation:

if it is cold it will be solid but the hotter it gets the less solid it will get if that makes sense.

The solubilization curve is shifted towards lower NaOH concentration with the increase of temperature.

The dissolution of NaOH in water is produced in exothermic in nature. If the temperature is increases, the equilibrium will shift towards the backward direction. Therefore, to nullify the effect of increased in temperature, This will decrease the solubility of NaOH.

With a larger number of particles present, there is likely to be a more number of collisions and a faster rate of reaction occur. The rate of reaction increases as the temperature is increases. When the concentration increases, the number of reactant particles also increases.

Thus, The solubilization curve is shifted towards lower NaOH concentration with the increase in temperature.

To learn more about NaOH, follow the link;

https://brainly.com/question/3366922

#SPJ2

Ca(OH)2 entirely separates into Ca + and OH- ions due to its strong basic nature.

A example weak base is ammonia. Hydroxide ions are plainly absent from ammonia itself, but they are produced when it interacts with water. At any one time, roughly 99% of the ammonia is still present as ammonia molecules since the process is reversible.

NaOH totally separates from water to produce Na+ and OH. Because all accessible [OH] in NaOH is present in solution as [OH] and ready to take protons, it is regarded as a strong base.

[ OH-]  =  2 *0.014M

          =  0.028 M

  pOH = - log ( 0.028 )

          =    1.55

   pH   = 14 - pOH

          = 12.44

To know more about strong base visit:

https://brainly.com/question/16749233

#SPJ4

mol Percent Yield 47.25%.

Full calculation in image

To know more about Percent Yield visit:

https://brainly.com/question/17042787

#SPJ4

A type of equal temperature at a specific period or date is represented by an isotherm on a geographic map. In terms of thermodynamics, a curve on a Pressure-Volume diagram at constant temperature is what we mean. We can actually see from the graph that the range is: 10 Fahrenheit degrees

A system's temperature can be used to calculate its average kinetic energy. As the particle's velocity rises, the system's kinetic energy also begins to grow, which raises the temperature of the system. Heat is the energy that is transmitted when two bodies having different surface temperatures interact. When two bodies of different temperatures were kept in contact, the direction for heat transfer is dependent on the temperatures. SI units use the kelvin (K).

We use thermometers to monitor temperature; chances are, you have one of them in your home for when you're feeling under the weather. Mercury-filled thermometers were once common, but they are no longer used because of the risk of mercury leakage or thermometer failure.

To know more about Temperature visit:

https://brainly.com/question/12035620

#SPJ4

The claim is accurate. Below its pi, an amino acid will have a positive average charge. Below its pi, an amino acid will often have a positive average charge.

Body protein as well as other vital nitrogen-containing substances including creatine, steroid hormones, and also some neurotransmitter cannot be produced without amino acids. Although limitations are expressed in terms of protein, amino acids are a biological necessity.

A protein is made up of one or more polypeptide chains—chains of amino acids—whose sequence is encoded by a gene. While the body can synthesis some amino acids, essential amino acids cannot and must be received from diet.

To know more about Amino acids visit :

https://brainly.com/question/1837143

#SPJ4

The amount of energy that the water has absorbed, according to the question, is 105 joules.

However, Mildrexler, who wasn't engaged in the current study, claims that the Lut Desert has truly arisen as the hottest site on Earth due to its "consistently hot imprint over a broad region."

Mass of water = 5 grams

Temperature change equals 10 ° from 15 degrees.

The formula for the amount of heat is as follows:

Q = m x c x Δθ

Where m =mass

c = specific heat capacity and

Δθ = change in temperature

c = 4.2J/g/degrees

Q = 5 x 4.2 x 5

Q = 105Joules

To know more about Temperature visit :

https://brainly.com/question/29072206

#SPJ4

Chlorine gas has the the chemical formula [tex]Cl_{2}[/tex] ,Solid phosphorus has the chemical formula [tex]P_{4}[/tex] ,Phosphorous pentachloride has the chemical formula [tex]PCl_{5}[/tex], The final balanced equation is [tex]P_{4}[/tex]  + 10 [tex]Cl_{2}[/tex]   ...........> 4 [tex]PCl_{5}[/tex],

distorted vision blisters, redness, and burning sensation on the skin after exposure to gas. If skin is subjected to liquid chlorine, it may suffer injuries resembling frostbite. feeling of burning in the eyes, throat, and nose.

The taste and smell of chlorine gas are both disagreeable. In concentrations as low as 1 part of every million, it can be detected (ppm). As an oxidizing agent, chlorine corrodes the metals used in plumbing and kitchen appliances. Equipment gaskets might become brittle due to corrosion from chlorine.

To learn more about Chlorine visit:

https://brainly.com/question/18094198

#SPJ1

Answer:

the density of the object is 1 g/mL

Explanation:

The lowest energy sublevel is always the 1s sublevel, which consists of one orbital

Because it is less effectively insulated, a 2s electron has a larger effective nuclear charge and is retained closer to the nucleus than a 2p electron, resulting in a lower energy for the 2s orbital.

The 1s sublevel, which consists of one orbital, is always the lowest energy sublevel. When the hydrogen atom is in its ground state, its solitary electron will occupy the 1s orbital.

An s-type subshell will have the lowest energy and an f-type subshell will have the greatest energy for the same main quantum number value, thus four electrons with the same principal quantum number. The energy of the electron increases as the secondary quantum number increases.

To learn more about orbital lower to refer:

brainly.com/question/10852220

#SPJ4

The maximum number of electrons that can fit in the outermost shell of an atom is 2 for s-block, 8 for p-block, 18 for d-block, and 32 for f-block elements.

The maximum number of electrons that can fit in the outermost shell of an atom is determined by the electron capacity of that shell, which is also known as the maximum number of electrons that can occupy a shell.

It is important to note that this information is based on the electronic structure of an atom and not on the number of valence electrons it has.

To learn more about electrons at

https://brainly.com/question/1255220?referrer=searchResults

#SPJ4