The magnitude of the electric field at point P which is 0.20 m to the right of the positive charge is 3,3375 N/C.
The electric field(E) due to an isolated point charge is
E= KQ/r^2
Here K is the Electrostatic Constant = 1/4π∈ = 9 x 10^9 N m^2/C^2
Q is the magnitude of the charge
r is the distance of the point from the charge
Putting q= 15 nC and r = 0.20 m in the given equation
E = 9 x 10^9 x 15 x 10^-9/(0.20)^2
E = 3375 N/C
Hence, the magnitude of the electric field at point p which is 0.20 m to the right of the positive charge is 3,3375 N/C.
To know more about "electric field", refer to the link given below:
https://brainly.com/question/8971780?referrer=searchResults
#SPJ4
A cube 5.0 cmcm on each side is made of a metal alloy. after you drill a cylindrical hole 2.5 cmcm in diameter all the way through and perpendicular to one face, you find that the cube weighs 6.30 nn.
(a) The density of the metal is 7486.88kg/[tex]m^{3}[/tex]
(b) The cube weigh 9.17N before we drill a hole in it.
The Newton's second rule, the definition of density, and the geometric relationships that enable us to calculate the volume of the given figures must all be applied in order to answer this problem.
The volume of a cube with equal sides is found in this situation by
[tex]V_{c} = l^{3}[/tex]
[tex]V_{c} = 5^{3}[/tex] = 125[tex]cm^{3}[/tex]
When it comes to perforated material, we know that its volume is determined by the cylindrical geometry, or
[tex]V_{d} = \pi r^{2} l[/tex]
[tex]V_{d} = \pi (\frac{2.5}{2}) ^{2} *5[/tex] = 12.5[tex]\pi cm^{3}[/tex]
The net volume would be in this case: ΔV = 125[tex]cm^{3}[/tex] - 12.5[tex]\pi cm^{3}[/tex] = 85.75[tex]cm^{3}[/tex] = 85.75×[tex]10^{-6}[/tex][tex]m^{3}[/tex]
Since we already know the weight and gravity, we can use Newton's second law to get the mass,
F = mg
[tex]m =\frac{6.3}{9.8}[/tex]
m = 0.642kg
Part(a) Based on the relationship between density and the mass and volume units, we must use;
ρ = m/v
ρ = [tex]\frac{0.642}{85.75*10^{-6} }[/tex]
ρ = 7486.88kg/[tex]m^{3}[/tex]
So, the density of the metal is 7486.88kg/[tex]m^{3}[/tex]
Part(b) Next, determine the cube's weight.
W = mg = Vρg
W = 125×[tex]10^{-6}[/tex] × 7486.88 × 9.8
W = 9.17N
The cube weigh 9.17N before we drill a hole in it.
Learn more about volume of a cube here:
https://brainly.com/question/11168779
#SPJ4
Sound from the siren of an emergency vehicle has a frequency of 667.2 hz and moves with a velocity of 349.8 m/s. what is the distance from one condensation to the next?
Sound from the siren of an emergency vehicle has a frequency of 667.2 hz and moves with a velocity of 349.8 m/s, thus the distance from one condensation to the next is 0.52m.
Sound wave characteristicsWaves of sound exist. A disturbance of matter that is conveyed from its source outward is how sound is more precisely defined. Anything that is shifted out of its balance is considered a disturbance.
Some sound waves are classified as periodic waves, which means that the matter’s atoms move in a straightforward harmonic fashion.
As, a string vibrating creates a sound wave. A portion of the string’s energy is used to compress and expand the surrounding air as it oscillates back and forth.
Pressures are a little bit higher and lower as a result. Low pressure regions are rarefactions, and higher-pressure regions are compressions. The air is moved by the pressure anomaly.
Provided that,
∨= 667.2 hz
V= 349.8 m/s
λ =?
∨ = x/λ
λ = 349.8/667.2
λ = 0.52m
To know more about sound waves, visit:
https://brainly.com/question/21995826
#SPJ4
Determine the work done in kj in a piston which has a constant pressure of 25 psi its initial volume is 0.3 m^3 while its final vloume
The work done is 51.71 kJ.
We need to know about work done to solve this problem. The work done in compression depends on the pressure and change in volume. It can be determined as
W = P . ΔV
where W is work done, P is pressure and ΔV is change in volume.
From the question above, we know that
P = 25 psi
ΔV = 0.3 m³
Convert the pressure to pascal
25 psi = 172369 Pa
By substituting the given parameter, we can calculate the work done
W = P . ΔV
W = 172369 . 0.3
W = 51710.7 joule
Convert to kj
W = 51710.7 x 10¯³ kJ
W = 51.71 kJ
Hence, the work done is 51.71 kJ
For more on work done at: https://brainly.com/question/25573309
#SPJ4
After completing their research, scientists often publish their data in journals or present their results at conferences so other scientists can evaluate their experiments. Why is this a necessary part of the scientific process?
The publication of research in peer-reviewed journals and conferences is a necessary part of the scientific process to ensure the dissemination of the line of investigation and thus increase the knowledge about a given topic.
What is the purpose of dissemination in research?In science, dissemination has a fundamental role because it ensures cutting-edge of knowledge about a given topic in particular, which is achieved by publication in journals.
In conclusion, the publication of research in peer-reviewed journals and conferences is a necessary part of the scientific process to ensure the dissemination of the line of investigation and thus increase the knowledge about a given topic.
Learn more about dissemination in research here:
https://brainly.com/question/13696644
#SPJ1
1.A ball is thrown vertically upwards with a velocity of 49 m/s. Calculate
(i) the maximum height to which it rises,
(ii) the total time it takes to return to the surface of the earth.
(i) Max height is 122.5 meters.
(ii) Total time is 10 seconds.
A space traveller weighs herself on earth at a location where the acceleration due to gravity is 9.81 m/s29.81 m/s2 and finds a value of 515 n.515 n. what is her mass?
The mass of the space traveller on earth is calculated as 56.22 kg. The correct answer is 56.22 kg
What is force?
Force is termed as the product of mass and acceleration. Terms like stretch and squeeze also can be used to denote force. In Physics, force is defined as: The push or pull on an object with mass causes it to vary its velocity. Force is an external agent capable of adjusting a body's state of rest or motion. it's a magnitude and a direction.
Given information;
A space traveler weighs herself on Earth at a location where the acceleration due to gravity is 9.81 meters per second square.
And force applied on earth 551 N.
The value of mass can be determined by using the formula;
Force = Mass × Acceleration
Mass = [tex]\frac{Force}{Acceleration}[/tex]
Substitute all the values in the formula;
Mass = [tex]\frac{Force }{Acceleration }[/tex]
Mass = [tex]\frac{551}{9.81}[/tex]
Mass = 56.22 kg
Hence, the mass of the object is 56.22 kg
Learn more about force :
brainly.com/question/26115859
#SPJ4
If a gas and a liquid are at the same temperature and pressure, diffusion occurs much faster in the gas because:_________
Diffusion occurs more quickly in gases than in liquids because the space between the constituent particles in gases is higher than in liquids. Gas particles therefore have more kinetic energy and move more quickly.
What causes diffusion to occur more quickly in a gas than a liquid at the same temperature?Because there is more space between the constituent particles in gases than in liquids, diffusion happens more quickly in gases than in liquids. As a result, the kinetic energy and speed of the particles in gas are increased.
Why does diffusion happen more quickly in a gas?Compounds diffuse more swiftly through gases than through liquids depending on the type of substance.
This is due to the fact that particles in a gas are more dispersed and move more quickly than those in a liquid.
To know more about diffusion visit:
https://brainly.com/question/24746577
#SPJ4
Given the s-n curve for 4340 steel, is there an endurance limit? if so, what is the stress value for the endurance limit? (4 pts)
The endurance limit is defined as the maximum amplitude. at Completely reversed stress that the standard Specimen Can Sustain for a 10° Cycle with out fatigue failure.
From the below graph,
[tex]10^6[/tex] cycles --> stress amplitude σ( MPa) = 750 M Pa
What is stress amplitude in fatigue?The fatigue strength is the stress amplitude at which failure occurs for a given number of cycles. N is the number of cycles required for a material to fall flat at a given stretch in order to extend fatigue life. S = Smax-Smin, the stretch runThe fatigue limit could be a stress amplitude threshold value. Stretch amplitudes below this level do not result in failure, whereas stretch amplitudes above the fatigue constraint result in crack initiation and split growth, which leads to failure. The fatigue strength is the stress amplitude at which failure occurs for a given number of cycles. N is the number of cycles required for a material to fail in fatigue life at a given stress range.The maximum amplitude is used to define the endurance limit. The standard specimen can withstand completely reversed stress for a 10° cycle without fatigue failure.To learn more about stress amplitude, visit;
https://brainly.com/question/15215962
#SPJ4
This is for Earth Space Science
One of the major events that contributed to Snowball Earth was the series of large volcanic eruptions that occurred 700 million years ago in what is now Canada. These eruptions caused ⎽⎽⎽(blank)⎽⎽⎽⎽⎽ particles to get trapped in the atmosphere. The particles blocked incoming solar radiation, which had a strong ⎽⎽⎽(blank)⎽⎽⎽ effect on the planet.
1. carbon dioxide; warming
2. sulfur gas; warming
3. sulfur gas; cooling
4. carbon dioxide; cooling
The words that complete the blanks are; carbon dioxide; warming. Option 1
What is volcanic eruption?The term volcanic eruption has to do with a situation in which molten magma suddenly bursts out of the earth and may solidify to give rise to the emergence of rocks. We know that rocks are the solid parts of the earth hat may occur above or below the earth's crust. During a large volcanic event. It is common that carbon dioxide is evolved into the atmosphere.
To complete the sentence; One of the major events that contributed to Snowball Earth was the series of large volcanic eruptions that occurred 700 million years ago in what is now Canada. These eruptions caused carbon dioxide particles to get trapped in the atmosphere. The particles blocked incoming solar radiation, which had a strong warming effect on the planet.
Learn more about volcanic eruption:https://brainly.com/question/1622004
#SPJ1
A mass of 30.4 g stretches a spring up to 0.85 m as it hangs from the spring. what is the spring constant?
By using Hooke's Law, the spring constant is 0.358 N/m.
We need to know about Hooke's Law to solve this problem. Hooke's Law describes the force applied to spring (elastic materials) will proportional to spring constant and displacement under the elastic condition. It can be described as
F = k . x
where F is force, k is spring constant and x is displacement.
From the question above, we know that
m = 30.4 grams = 0.0304 kg
x = 0.85 m
Find the weight
W = m . g
W = 0.0304 . 10
W = 0.304 N
By substituting the given parameters, we get
F = k . x
W = k . x
0.304 = k . 0.85
k = 0.304 / 0.85
k = 0.358 N/m
Hence, the spring constant is 0.358 N/m.
Find more on Hooke's Law at: https://brainly.com/question/12253978
#SPJ4
Imagine that you could build a telescope of any size in your backyard. Ultimately, the smallest angular size that could be resolved by this telescope would be governed by the?.
The blurring effects of the Earth's atmosphere would decide the smallest angular size that this telescope could resolve.
The term "angular size" refers to an object's apparent size as seen from an observer on Earth. The least angular size can be affected by the magnitude of lights received by telescopes, which can be changed by the earth's hazy atmosphere. Telescopes collect and amplify light from distant objects. Earth's atmosphere substantially limits astronomical observations for two basic reasons.
First, not all atmospheric wavelengths are equally transparent, and some wavelength regimes are completely out of range for ground-based telescopes. Therefore, while developing a telescope with a specific angular size, the earth's atmosphere must be considered.
To learn more about the angular size as seen from earth. Click, https://brainly.com/question/28417535
#SPJ4
Nuclear fusion can release large amounts of energy.
a. true
b. false
Nuclear fusion can release large amounts of energy is the True statement.
What is nuclear fusion?The nuclear fusion reaction occurs when two or more atom combine together to form a heavier atom. For example, when two hydrogen atoms fuse to form one helium atom.
This is the same process that powers the sun and creates huge amounts of energy several times greater than fission. It also doesn't produce highly radioactive fission products.
The nuclear fusion reaction releases large amount of energy, because Fusion reactions have an energy density many times greater than nuclear fission.
The reactions that produces far greater energy per unit of mass but even though the individual fission reactions are generally much more energetic than individual fusion ones, which are themselves millions of times more energetic than chemical reactions.
Thus, the statement is True.
Learn more about nuclear fusion,
https://brainly.com/question/12701636
#SPJ4
What volume, in ml, of 6.0 m sodium hydroxide is required to fully react with the copper (ii) nitrate produced?
The question is incomplete as the mass of copper is also needed to solve this. The given mass of copper is 0.9075 g.
The volume of 6.0 M sodium hydroxide(NaOH) required to fully react with copper nitrate produced is 4.76 ml.
The reaction between copper(Cu) and nitric acid(HNO3) is as follows:
Cu + HNO3 = Cu(NO3)2
According to the above reaction
1 mole of copper produces 1 mole of copper nitrate
Or 63.5 g of copper produces 1 mole of copper nitrate
Thus, 0.9075 g of copper produces 1/63.5 x 0.9075 = 0.0143 moles of copper nitrate
The reaction between sodium hydroxide(NaOH) and copper nitrate {Cu(NO3)2} is as follows:
2NaOH + Cu(NO₃)₂ ---> 2NaNO₃ + Cu(OH)₂
From the above equation,
1 mole of copper nitrate fully reacts with 2 moles of sodium hydroxide
Thus, 0.143 moles of copper nitrate fully reacts with 2 x 0.143 = 0.286 moles of sodium hydroxide
The molarity of the given NaOH solution is 6 M.
Hence its volume would be
Molarity = No. Of moles/Volume of solution(in liters)
6 = 0.286/ Volume
Volume = 0.0476 liters or 47.6 ml.
Hence, the volume of 6.0 M sodium hydroxide(NaOH) required to fully react with the copper nitrate produced is 4.76 ml.
To know more about "molarity", refer to the following link:
https://brainly.com/question/4401006?referrer=searchResults
#SPJ4
The question is incomplete as the mass of copper is also needed to solve this. The given mass of copper is 0.9075 g.
The volume of 6.0 M sodium hydroxide(NaOH) required to fully react with copper nitrate produced is 4.76 ml.
The reaction between copper(Cu) and nitric acid(HNO3) is as follows:
Cu + HNO3 = Cu(NO3)2
According to the above reaction,1 mole of copper produces 1 mole of copper nitrate. Or 63.5 g of copper produces 1 mole of copper nitrate. Thus, 0.9075 g of copper produces 1/63.5 x 0.9075 = 0.0143 moles of copper nitrate. The reaction between sodium hydroxide(NaOH) and copper nitrate {Cu(NO3)2} is as follows:
2NaOH + Cu(NO₃)₂ ---> 2NaNO₃ + Cu(OH)₂
From the above equation,1 mole of copper nitrate fully reacts with 2 moles of sodium hydroxide. Thus, 0.143 moles of copper nitrate fully react with 2 x 0.143 = 0.286 moles of sodium hydroxide. The molarity of the given NaOH solution is 6 M. Hence its volume would be
Molarity = No. Of moles/Volume of solution(in liters)
6 = 0.286/ Volume
Volume = 0.0476 liters or 47.6 ml.
Hence, the volume of 6.0 M sodium hydroxide(NaOH) required to fully react with copper nitrate produced is 4.76 ml.
To know more about "molarity", refer to the following link:
brainly.com/question/4401006?referrer=searchResults
#SPJ4
What is the index of refraction of a material in which the red-light wavelength is 450 nm?.
The index of refraction of a material in which the red-light wavelength is 450 nm is 1.38≤n≤1.67.
What is index of refraction?Refractive Index (Index of Refraction) is a value calculated from ratio of the speed of light in a vacuum to that in a second medium of greater density. The refractive index variable is most commonly symbolized by letter n or n' in descriptive text and mathematical equations.
The refractive index n is the factor by which wave slows down relative to the speed of light in vacuum c0 . Almost always, frequency of a wave is constant and so it is the speed and wavelength that change as light passes from one medium into another.
So the wavelength λ inside of the medium is related to free space wavelength λ0 through the refractive index n .
λ=λ0/n
Red light has free space wavelength λ0 of anywhere from 620 nm to 750 nm. All of those of wavelengths look red to our eyes. From above equation refractive index is
n1=λ0/λ=620 nm/450 nm=1.38
n2=λ0/λ=750 nm/450 nm=1.67
Based on information you gave, the refractive index could be anything in the range 1.38≤n≤1.67.
To know more about vacuum visit: brainly.com/question/11615301
#SPJ4
For each method - sometimes used a s heuristic, what is the distance from start to end? (ignore any coloring in the boxes)
Manhattan distance is a popular heuristic function for sliding-tile puzzles. It is calculated by tallying the number of moves along the grid that each tile takes to move away from its intended position.
What is the Manhattan distance heuristic?Manhattan distance is a popular heuristic function for sliding-tile puzzles. It is calculated by tallying the number of moves along the grid that each tile takes to move away from its intended position. The obvious option for a heuristic function is the Euclidean (straight-line) distance, which, as far as we are aware, can never underestimate the distance but might do so if there is a target obstacle to avoid on the way there.
Any problem-solving strategy that employs a practical approach or numerous short cuts in order to provide answers that might not be ideal but are adequate given a constrained timeline or deadline is known as a heuristic, or heuristic technique.
To learn more about heuristic technique refer to:
https://brainly.com/question/14789144
#SPJ4
Taylan is at rest with a cement truck in outer space at the space station, then Taylan begins to push on the cement truck with all his might to keep it from hitting the space station. What is that Susan will see really happening?
a
Taylan moving slowly backwards, while the cement truck moves away really slow.
b
Taylan moving backwards quickly, while the cement truck moves away really slow.
c
Taylan moving slowly forwards, while the cement truck moves towards him really fast.
d
Taylan moving slowly backwards, while the cement truck moves away really fast.
e
Taylan moving forwards quickly, while the cement truck moves away really fast.
Susan will see that Taylan moving slowly backward, while the cement truck moves away really slowly, therefore the correct answer is option A.
What is Newton's third law of motion?
Newton's third law of motion explains that forces exist in pairs. It states that for every action force there exists equal and opposite reaction force, these pairs of forces are equal in magnitude but opposite in direction.
As given in the problem, Taylan is at rest with a cement truck in outer space at the space station, then Taylan begins to push on the cement truck with all his might to keep it from hitting the space station,
Thus, Susan will see that Taylan moving slowly backward, while the cement truck moves away really slowly, therefore the correct answer is option A.
Learn more about Newton's third law of motion from here;
brainly.com/question/23772134
#SPJ1
The average speed of a runner in a 352. meter race is 8.0 meters per second. How long did it take the runner to complete the race?
Given that the temperature change observed is 11.5 c when 4.436 g of naoh are added to 150.0 ml of water. what is the heat energy in kj that is produced?
The heat energy in kj that is produced is 7.21kj given that the temperature change observed is 11.5 c when 4.436 g of naoh are added to 150.0 ml of water
It is given that 4.436g is the mass of NaOH. The density and volume of water it has been added to was also given.
We need to convert the water's volume to mass
Density = mass / volume
Thus, mass = density * volume
150.0mL H2O * (1.000 g/mL) = 150.0 g H2O.
Now simply add the two masses: 150g + 4.436g = 154.436g
Q = mcdT
Q = heat added or removed
m = mass of substance = 154.436g
c = specific heat of this solution is 4.06j/g C
dT = change in temperature
Q = 154.436g * 4.06 * 11.5
Q =7,210.62J
Q = 7.21kj
To learn more about the difference between heat energy and temperature. Click, https://brainly.com/question/20038450
#SPJ4
The following are summary statistics on triglyceride levels measured in a sample of n= 200 participants. are there outliers? justify your answer.
Statistics on triglyceride levels measured that there are no outliers as the minimum value (38) exceeds the lower limit of outliers and the maximum value (394) is less than the upper limit of outliers.
The risk of heart disease and stroke is increased by a number of disorders, including obesity and metabolic syndrome, which is characterised by excess body fat around the waist, high blood pressure, high triglycerides, high blood sugar, and abnormal cholesterol levels.
Your doctor categorises elevated triglyceride levels as: 150–199 mg/dL for mild. 200 to 499 mg/dL is moderate. Significant: More than 500 mg/dL.
Choosing a healthy lifestyle can help lower elevated triglyceride levels. Diet. Avoid simple carbs like sugar, white flour-based foods, fructose, trans fats, and food items containing hydrogenated oils or fats. Olive oil and canola oil are examples of plant-based fats that can be used in place of the fat present in meats.
Learn more about triglyceride:
https://brainly.com/question/23737740
#SPJ4
The complete question is ''The following are summary statistics on triglyceride levels measured in a sample of n = 200 participants. Are there outliers? Justify your answer.
n = 200 X = 203 s = 64 Min = 38 Q1 = 59 Median = 180 Q3 = 243 Max = 394''
On average, an African elephant is 12,125 lbs. What is the mass of an African elephant in kilograms, expressed in scientific notation (1 lb = 0.4536 kg)?
Answer:
See below
Explanation:
12 125 lbs * .4536 kg/lb = 5499.9 kg = 5 .4999 x 10 ^3 kg
A proton is placed in an electric field of intensity 800 n/c. what are the magnitude and direction of the acceleration of the proton due to this field?
The acceleration of the proton due to this field is 7.66 × 10¹⁰ m/s² in
the direction of the electric field.
What is Electric force on a Charged particle?
The electric force on a charged particle is measured using the following formula.
F=qE
The charge is q and the electric field intensity is E
So, we need the charge on the particle and electric field intensity to calculate the electric force on a charged particle.
Also, from Newton's laws of motion;
F = ma
where m is mass = 1.67×10⁻²⁷kg and a is acceleration
ma = qE
a = qE/m
a = [tex]\frac{1.6 * 10^{-19} *800}{1.67 *10^{-27} }[/tex]
a = 7.66 × 10¹⁰ m/s²
To learn more about Electric force, refer
to https://brainly.com/question/26117248
#SPJ4
What is the temperature of a 1.59l flask containing 0.175mol of ne at a pressure of 1.09atm?
The temperature of a 1.59l flask containing 0.175mol of Ne at a pressure of 1.09atm is 120.70 K.
How do you find the temperature of the compound?
We know that the ideal gas law uses the formula:
PV = nRT
where,
P is referred as the pressure, which is measured in atmospheres (atm),
V is referred as the volume, which is measured in cubic meter ([tex]m^{3}[/tex]),
T is referred as the temperature, which is measured in kelvin (K),
R is referred as the ideal gas law constant , i.e., 0.0821 atm(L)/mol(K),
n is known as the number of moles (mol).
Given that,
P = 1 atm = 101 325 Pa
1.09 atm = 1.09 atm x 101 325 Pa/atm = 110 444 Pa
n = 0.175 mol
V = 1.59 x 10⁻³ m³
By substituting the values in the ideal gas law formula,
PV = nRT
110 444 Pa x 1.59 x 10⁻³ m³ = 0.175 mol x 8.314 Jmol⁻¹K⁻¹ x T
T = 120.70 K
To know more about the Ideal Gas Law, visit the given link:
brainly.com/question/14553536
#SPJ4
Rolls of aluminu are 304 mm wide and 0.016mm thick. what maximum length of aluminum foil (in m) can be made from 1.10kg of aluminum? density of al 2.70g/cm'
Aluminum foil can be made to a maximum length of 87.76 meters from 1.10 kg of aluminum.
How do you compute density?Density is defined as d = M/V, where d is density, M is mass, and V is volume.Though the SI unit of density is kg/m3, we use g/cm3 for solids, g/ml for liquids, and g/L for gases for convenience.Density is an important concept because it tells us which substances will float and which will sink when placed in a liquid. Substances float in general if their density is less than the density of the liquid in which they are placed.By using the above formula for density
ρ = mass / volume
⇒ As given in the problem Rolls of aluminum foil are 304 mm wide and 0.016-mm thick.
the mass of the aluminum = 1.10-kg
mass = 1100 grams
the density of the aluminum = 2.70 g/cm3
density = 17/3
⇒ 2.70 g/cm3 = 1100 grams /volume
volume = 1100/ 2.70
=407.40 cm3
volume = width ×thickness ×length
407.40 cm3 = 30.4 ×.0016 ×length
⇒ length = 8375.97 cm
= 87.76 meters
Thus, the maximum length of aluminum foil that can be made from 1.10-kg of aluminum would be 87.76 meters.
To learn more about density refer to
https://brainly.com/question/26117248
#SPJ4
a car accelerates from rest to 22 m/s in 12.5 seconds. what distance does it cover in this time?
Answer:
Hope the picture helps you.............
3x+5=40 solve for x to get the answer.
This is question isnt real i just need to talk
with someone
Explanation:
3x=40-5
3x=35
x=35/3
x=11.66 or x=11 2/3
Venus and earth started out with roughly the same amount of water. while earth still has water in abundance, all of venus' was lost. where did it go?
Ultraviolet rays split the hydrogen from the oxygen components, and the hydrogen escaped into space.
How did the water disappear on Venus?Venus and earth begun out with generally the same amount of water. whereas soil still has water in wealth, all of Venus' was lost. At Venus, the solar wind strikes the upper air and carries off particles into space. Planetary researchers think that the planet has misplaced portion of its water in this way over the four and a half thousand million a long time since the planet's birth.
To learn more about venus, visit;
https://brainly.com/question/14598866
#SPJ4
What volume of h2 measured at 26 c and 100 kpa will be produced from 3.25g of na?
40.1L volume of h2 gas that is measured at 26 c and 100 kpa will be produced from Na of mass given as 3.25g.
What does pressure unit kPa mean?Kilopascal (kPa), a 1,000-fold increase in the meter-kilogram-second system’s measure of pressure and tension (the International System of Units [SI]).
Blaise Pascal, a French mathematician and scientist, is honored by its name.
How is kPa determined?The formula below can be used to translate kg/cm2 into kPa:
A kPa equals 1000 pascals (Pa)
1 kg/cm2 is equal to 98066.5 pascals (Pa), or kPa value multiplied by 1000 Pa.
Thereafter,
T = 26°C
= 299K
P = 100kPa
P= 100/101.325
=0.986923 atm
mass = 3.25g
Atomic mas of H = 1.00784
molar mass of H2 gas = 2x10.00784
= 2.01568g/mol
mole of H2 in 3.25g = 3.25/2.01568 = 1.612359 mol
This gas provided in the question follows the ideal gas equation, so it can be written as
PV = nRT
⇒ V = nRT/P
= (1.612359x 0.0821x 299) / 0.986929
⇒ V = 40.104473
V = 40.1 L
Thus, the volume of gas was found to be 40.1Liter.
To know more about ideal gas law, visit:
https://brainly.com/question/28257995
#SPJ4
Please help, don’t need explanations
The cyclist gets chemical energy from the food.
Peddling transfers mechanical energy to the Dynamo.
Electrical energy is transferred through the wires.
The bulb transfers energy to the room by converting electrical energy into light energy and heat
The sun is a store of solar energy.
Energy is transferred to solar cell by solar panel.
Electrical energy is transferred through the wires.
Energy is transferred to water by conduction.
The water is a store of hydro energy.
Energy is transferred to room by heat energy.
#SPJ9
An equilibrium in a game in which players pursue their own self-interests and do not cooperate is called a:_________
The Equilibrium in a game in which players pursue their self-interests and do not cooperate is called as Non-Cooperative Equilibrium.
What is Non-Cooperative Equilibrium?As opposed to cooperative games, non-cooperative games feature individual player competition, and alliances can only function there if they are self-enforcing. It is conceivable to model cooperation using non-cooperative game theory and competition using cooperative game theory, since the terms "cooperative" and "non-cooperative" are merely technical phrases for the game theory that is used to model a game.
The primary differentiating factor is the lack of an outside authority to set norms mandating cooperative behavior. Players are unable to form coalitions without outside control (such as contract law), therefore they must face off against one another alone.
Hence, Non-Cooperative Equilibrium is the state of a game in which players just look out for themselves and do not collaborate.
To get more information about Non-Cooperative Equilibrium :
https://brainly.com/question/2396609
#SPJ4
An object traveling in a straight line accelerates. What will definitely happen due to the acceleration?
• The distance traveled in a certain time will increase.
O The displacement covered in a certain time will decrease.
O The speed of the object will stay constant.
• The velocity of the object will change.
Answer:
The distance traveled in a certain time will increase
Explanation:
