The lengths of nails produced in a factory are normally distributed with a mean of 5.02 centimeters and a standard deviation of 0.05 centimeters. Find the two lengths that separate the top 6% and the bottom 6%. These lengths could serve as limits used to identify which nails should be rejected. Round your answer to the nearest hundredth, if necessary.

Answers

Answer 1

Answer:

The length that separates the top 6% is 5.1 centimeters.

The length that separates the bottom 6% is 4.94 centimeters.

Step-by-step explanation:

When the distribution is normal, we use the z-score formula.

In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the zscore of a measure X is given by:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the pvalue, we get the probability that the value of the measure is greater than X.

In this question, we have that:

[tex]\mu = 5.02, \sigma = 0.05[/tex]

Find the two lengths that separate the top 6% and the bottom 6%.

Top 6%:

The 100-6 = 94th percentile, which is X when Z has a pvalue of 0.94. So X when Z = 1.555.

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]1.555 = \frac{X - 5.02}{0.05}[/tex]

[tex]X - 5.02 = 1.555*0.05[/tex]

[tex]X = 5.1[/tex]

So the length that separates the top 6% is 5.1 centimeters.

Bottom 6%:

The 6th percentile, which is X when Z has a pvalue of 0.06. So X when Z = -1.555.

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]-1.555 = \frac{X - 5.02}{0.05}[/tex]

[tex]X - 5.02 = -1.555*0.05[/tex]

[tex]X = 4.94[/tex]

The length that separates the bottom 6% is 4.94 centimeters.


Related Questions

Determine the​ value(s) of h such that the matrix is the augmented matrix of a consistent linear system. [Start 2 By 3 Matrix 1st Row 1st Column 1 2nd Column 4 3rd Column negative 2 2nd Row 1st Column 3 2nd Column h 3rd Column negative 6 EndMatrix ]

Answers

Answer:

Step-by-step explanation:

Consider the augments matrix (the right most column is  the extra vector).

[tex]\left[\begin{matrix} 1 & 4 & -2 \\3 & h & -6\end{matrix}\right][/tex]

By multypling the first row by 3 and substracting it from the second row and saving the result in the second row we get the matrix

[tex]\left[\begin{matrix} 1 & 4 & -2 \\0 & h-12 & 0\end{matrix}\right][/tex]

Note that since the value of the third column in the second row is 0, any value of h gives us a consistent system. An inconsistent system is when we get a row of zeros that is equal to a number different from 0.

Given the following diagram, are and opposite rays? yes no

Answers

Answer:

Where is the diagram?

Step-by-step explanation:

Answer:

OC and OE are apposite rays so the Answer is yes

if the distance between sydney and goulburn is 200km, find the average speed to complete the journey in 2 hours and 30 minutes

Answers

Answer:

80 km/h

Step-by-step explanation:

2 h 30 min = 2.5 h

Average speed = distance/time= 200 km/2.5 h = 80 km/h

If 5=3+2,then 3+2=5. What is the truth value

Answers

Answer:

true

Step-by-step explanation:

If a function f(x) is defined as 3x2 + x + 2, what is the value of Lim h-0 f(x+h)-f(x)/h? A. 3x + 1 B. 3x + 2 C. 6x + 1 D. 6x + 2

Answers

Answer:

[tex] f(x+h) = 3(x+h)^2 +(x+h) +2= 3(x^2 +2xh+h^2) +x+h+2[/tex]

[tex]f(x+h) = 3x^2 +6xh +3h^2 +x+h+2= 3x^2 +6xh +x+h+ 3h^2 +2[/tex]

And replacing we got:

[tex] lim_{h \to 0} \frac{3x^2 +6xh +x+h+ 3h^2 +2 -3x^2 -x-2}{h}[/tex]

And if we simplfy we got:

[tex] lim_{h \to 0} \frac{6xh +h+ 3h^2 }{h} =lim_{h \to 0} 6x + 1 +3h [/tex]

And replacing we got:

[tex]lim_{h \to 0} 6x + 1 +3h = 6x+1[/tex]

And the bet option would be:

C. 6x + 1

Step-by-step explanation:

We have the following function given:

[tex] f(x) = 3x^2 +x+2[/tex]

And we want to find this limit:

[tex] lim_{h \to 0} \frac{f(x+h) -f(x)}{h}[/tex]

We can begin finding:

[tex] f(x+h) = 3(x+h)^2 +(x+h) +2= 3(x^2 +2xh+h^2) +x+h+2[/tex]

[tex]f(x+h) = 3x^2 +6xh +3h^2 +x+h+2= 3x^2 +6xh +x+h+ 3h^2 +2[/tex]

And replacing we got:

[tex] lim_{h \to 0} \frac{3x^2 +6xh +x+h+ 3h^2 +2 -3x^2 -x-2}{h}[/tex]

And if we simplfy we got:

[tex] lim_{h \to 0} \frac{6xh +h+ 3h^2 }{h} =lim_{h \to 0} 6x + 1 +3h [/tex]

And replacing we got:

[tex]lim_{h \to 0} 6x + 1 +3h = 6x+1[/tex]

And the bet option would be:

C. 6x + 1

Answer:

6x+1

Step-by-step explanation:

Plato :)

A teacher wrote the equation 3y + 12 = 6x on the board. For what value of b would the additional equation 2y = 4x + b form a system of linear equations with infinitely many solutions?
b = –8
b = –4
b = 2
b = 6

Answers

Answer:

-8

Step-by-step explanation:

For a system to have infinitely many solutions the two equations must be the same line. We can simplify the first and second equations by dividing them by 3 and 2 respectively to get:

y + 4 = 2x

y = 2x + b/2 → y -b/2 = 2x

Since the constants must be equal, 4 = -b/2 which means b = -8.

Answer:

b=-8

Step-by-step explanation:

Scientists think that robots will play a crucial role in factories in the next several decades. Suppose that in an experiment to determine whether the use of robots to weave computer cables is feasible, a robot was used to assemble 507 cables. The cables were examined and there were 9 defectives. If human assemblers have a defect rate of 0.035 (3.5%), does this data support the hypothesis that the proportion of defectives is lower for robots than humans

Answers

Answer:

The data support the hypothesis that the proportion of defectives is lower for robots than humans.

Step-by-step explanation:

To know if the proportion of defectives is lower for robots than humans so as to prove if the hypothesis is true.

From the data given:

Total number of cables a robot assembled = 507

Defectives = 9

To get the defect rate =  the number of defects divided by the total number of cables, multiplied by 100.

Defect rate =  (9 / 507) x 100 = 0.01775 x 100

Defect rate for the robot = 1.775‬%

From the question, a robot was used and the defect rate after the calculation is 1.775‬%. While for humans, the defect rate is 3.5%. This implies, if humans were used to assembling the same 507 cables, there will be 17.745‬ defectives.

x / 507 = 3.5%

x (defectives) = 17.745‬

Therefore, the data support the hypothesis that the proportion of defectives is lower for robots than humans.

A science club has 16 members. How many ways can a president, a Vice President, and a treasurer be selected from the members?

Answers

Answer:

3,360

Step-by-step explanation:

We calculate the number of permutations for this problem where the order in which we accommodate people matters to us as follows:

[tex]P=\frac{n!}{(n-r)!}[/tex]

where n is the total number of options we have; the total number of members: [tex]n=16[/tex]

and r is the number of places or positions we are considering which in this case are the President position, the Vice president position and the treasurer position ⇒ 3 positions in total ⇒ [tex]r=3[/tex]

substituting n and r in the formula:

[tex]P=\frac{16!}{(16-3)!} \\\\P=\frac{16!}{13!} \\\\P=3,360[/tex]

A president, a Vice President, and a treasurer can be selected from the members in 3,360 ways

A rocket is launched from a tower. The height of the rocket, y in feet, is related to the time after launch, x in seconds, by the given equation. Using this equation, find the maximum height reached by the rocket , to the nearest 100th of a foot. y=-16x^2+230x+112

Answers

Answer:

The maximum height reached by the rocket is of 938.56 feet.

Step-by-step explanation:

The height y, after x seconds, is given by a equation in the following format:

[tex]y(x) = ax^{2} + bx + c[/tex]

If a is negative, the maximum height is:

[tex]y(x_{v})[/tex]

In which

[tex]x_{v} = -\frac{b}{2a}[/tex]

In this question:

[tex]y(x) = -16x^{2} + 230x + 112[/tex]

So

[tex]a = -16, b = 230, c = 112[/tex]

Then

[tex]x_{v} = -\frac{230}{2*(-16)} = 7.1875[/tex]

[tex]y(7.1835) = -16*(7.1835)^{2} + 230*7.1835 + 112 = 938.56[/tex]

The maximum height reached by the rocket is of 938.56 feet.

(please answer as soon as possible)If two lines intersect at a point, then vertically opposite angles are always: a)Complememtary b)Supplementary c)Unequal d)Equal

Answers

Answer:

D

Step-by-step explanation:

This is the veritcal angles theorem

Customer arrivals at a bank are random and independent; the probability of an arrival in any one-minute period is the same as the probability of an arrival in any other one-minute period. Answer the following questions, assuming a mean arrival rate of three customers per minute.

Required:
a. What is the probability of exactly three arrivals in one-minute period?
b. What is the probability of at least three arrivals in a one-minute period?

Answers

Answer:

a)0.2240

b)0.5768

Step-by-step explanation:

Given:

µ=3

Poison probability is given by :

[tex]f_k=\frac{\mu^ke^-^\mu}{k!}[/tex]

a) Evaluating at k=3

[tex]f(3)=\frac{3^3e^-^3}{3!} \approx 0.2240[/tex]

b)Evaluating at k=0,1,2:

[tex]f(0)=\frac{3^0e^-^3}{0!} \approx 0.0498[/tex]

[tex]f(1)=\frac{3^1e^-^3}{1!} \approx 0.1494[/tex]

[tex]f(2)=\frac{3^2e^-^3}{2!} \approx 0.2240[/tex]

Use complement rule:

P(x≥3)= 1 - f(0) - f(1) - f(2)= 1- 0.0498 - 0.1494 - 0.2240 =0.5768

Determine the percentage of all samples of three men that have mean brain weights within 0.1 kg of the population mean brain weight of 1.20 kg. Interpret your answer in terms of sampling error.

Answers

Answer:

Percentage of all samples of three men that have mean brain weights within 0.1 kg of the population mean brain weight of 1.20 kg = 78.5%

The sampling error is 0.08083, in terms of the sampling error, 78.5% of samples of three men will have mean brain weights within (1.24×sampling error) of the mean.

Step-by-step explanation:

Complete Question

According to one study, brain weights of men are normally distributed with mean = 1.20 kg and a standard deviation = 0.14 kg.

Determine the percentage of all samples of three men that have mean brain weights within 0.1 kg of the population mean brain weight of 1.20 kg. Interpret your answer in terms of sampling error.

Solution

The Central limit theorem allows us to say

The mean of sampling distribution is approximately equal to the population mean.

μₓ = μ = 1.20 kg

And the standard deviation of the sampling distribution is given as

σₓ = (σ/√N)

σ = population standard deviation = 0.14 kg

N = sample size = 3

σₓ = (0.14/√3) = 0.08083

Percentage of all samples of three men that have mean brain weights within 0.1 kg of the population mean brain weight of 1.20 kg, that is, percentage of all samples of three men with mean brain weights within 1.10 kg and 1.30 kg.

P(1.10 ≤ x ≤ 1.30)

We first normalize or standardize 1.10 and 1.30

The standardized score for any value is the value minus the mean then divided by the standard deviation.

For 1.10 kg

z = (x - μₓ)/σₓ = (1.10 - 1.20)/0.08083 = -1.24

For 1.30 kg

z = (x - μₓ)/σₓ = (1.30 - 1.20)/0.08083 = 1.24

To determine the required probability

P(1.10 ≤ x ≤ 1.30) = P(-1.24 ≤ z ≤ 1.24)

We'll use data from the normal distribution table for these probabilities

P(1.10 ≤ x ≤ 1.30) = P(-1.24 ≤ z ≤ 1.24)

= P(z ≤ 1.24) - P(z ≤ -1.24)

= 0.89251 - 0.10749

= 0.78502 = 78.502%

The sampling error is 0.08083, in terms of the sampling error, 78.5% of samples of three men will have mean brain weights within (1.24×sampling error) of the mean.

Hope this Helps!!!

A farmer was interest in determining how many grasshoppers were in his field. He knows that the distribution of grasshoppers may not be normally distributed in his field due to growing conditions. As he drives his tractor down each row he counts how many grasshoppers he sees flying away. After several rows he figures the mean number of flights to be 57 with a standard deviation of 12. What is the probability of the farmer will count 52 or fewer flights on average in the next 40 rows down which he drives his tractor

Answers

Answer:

= 0.0041

Step-by-step explanation:

Given that:

A farmer was interest in determining how many grasshoppers were in his field. He knows that the distribution of grasshoppers may not be normally distributed in his field due to growing conditions. As he drives his tractor down each row he counts how many grasshoppers he sees flying away

mean number of flights to be 57

a standard deviation of 12

fewer flights on average in the next 40 rows

[tex]\mu = 57\\\\\sigma=12\\\\n=40[/tex]

so,

[tex]P(x<52)[/tex]

[tex]=P(\frac{x-\mu}{\sigma/\sqrt{n} } <\frac{52-57}{12/\sqrt{40} } )\\\\=P(z<\frac{-5\times6.325}{12} )\\\\=P(z<\frac{-31.625}{12})\\\\=P(z<-2.64)[/tex]

using z table

= 0.0041

The probability of the farmer will count 52 or fewer flights on average in the next 40 rows down which he drives his tractor is 0.0041 and this can be determined by using the properties of probability.

Given :

The distribution of grasshoppers may not be normally distributed in his field due to growing conditions.The mean number of flights to be 57 with a standard deviation of 12.

The probability of the farmer will count 52 or fewer flights on average in the next 40 rows down which he drives his tractor, can be determined by using the following calculations:

[tex]\rm P(x<52)=P\left (\dfrac{x-\mu}{\dfrac{\sigma}{\sqrt{n} }}<\dfrac{52-57}{\dfrac{12}{\sqrt{40} }}\right)[/tex]

[tex]\rm P(x<52)=P\left (z<\dfrac{-5\times 6.325}{12 }}\right)[/tex]

[tex]\rm P(x<52)=P\left (z<\dfrac{-31.625}{12 }}\right)[/tex]

[tex]\rm P(x<52)=P\left (z<-2.64\right)[/tex]

Now, using z-table:

P(x < 52) = 0.0041

For more information, refer to the link given below:

https://brainly.com/question/21586810

Show that T is a linear transformation by finding a matrix that implements the mapping. Note that x1, x2, ... are not vectors but are entries in vectors. T(X1,X2,X3,X4) = (x1 +4x2, 0, 3x2 +x4, x2 -x4)

Answers

The transformation matrix for the mapping T is the matrix T such that

[tex]\mathbf T(\vec x)=T\,\vec x[/tex]

where

[tex]T=\begin{bmatrix}1&4&0&0\\0&0&0&0\\0&3&0&1\\0&1&0&-1\end{bmatrix}[/tex]

The correct matrix A is

[tex]A=\left[\begin{array}{cccc}1&4&0&0\\0&0&0&0\\0&3&0&1&0&1&0&-1\end{array}\right][/tex]

To find the matrix A that represents the linear transformation T, we need to determine the coefficients that map the input vector (X₁, X₂, X₃, X₄) to the output vector (x₁ +4x₂, 0, 3x₂ +x₄, x₂ -x₄)

By comparing the corresponding entries in the input and output vectors, we can determine the coefficients of the matrix A.

The first row of A will have the coefficients for X₁ and X₂, which are 1 and 4 respectively. The second row will have all zeros since the output vector has a zero in the second position. The third row will have the coefficient 3 for X₂ and 1 for X₄. Finally, the fourth row will have the coefficient 1 for X₂ and -1 for X₄.

Thus, the matrix A that implements the mapping T is:

[tex]A=\left[\begin{array}{cccc}1&4&0&0\\0&0&0&0\\0&3&0&1&0&1&0&-1\end{array}\right][/tex]

Learn more about linear transformation here:

brainly.com/question/13595405

#SPJ2

which quadrilateral will always have four reflection symmetry

Answers

Step-by-step explanation:

a rectangle has reflectional symmetry when reflected over the line through the midpoints of its opposite sides

Answer: A square always has a four reflection symmetry no matter the size.

Please help will mark brainliest.

Answers

Answer:

  parallel lines both have slope 1/3; non-parallel lines both have length 5

Step-by-step explanation:

It generally works well to follow instructions.

A graph of the points shows you that the parallel sides are RA and PT. The difference between the end points of these segments are ...

  A - R = (6, 8) -(-3, 5) = (9, 3) = (Δx, Δy)

So, the slope of RA is Δy/Δx = 3/9 = 1/3

And the other difference and slope are ...

  P -T = (9, 4) -(-3, 0) = (12, 4)   ⇒   Δy/Δx = 4/12 = 1/3

The slope of RA is the same as the slope of PT, so those segments are parallel.

__

The length of segment TR can be found from the differences of the end point coordinates:

  R - T = (-3, 5) -(-3, 0) = (0, 5)

Since these points are on the same vertical line, this tells us the segment length is 5.

The other difference of coordinates is ...

  A - P = (6, 8) -(9, 4) = (-3, 4)

The distance formula tells us the length of AP is then ...

  AP = √((-3)² +4²) = √25 = 5

Non-parallel sides TR and AP have the same lengths, so the trapezoid is isosceles.

Any help would be great

Answers

Answer:

30%

Step-by-step explanation:

fat ÷ total

15 ÷ 50

.3

30%

Answer:

30%

Step-by-step explanation:

To find the percent from fat, take the calories from fat and divide by the total

15/50

.3

Multiply by 100%

30%

5 inches is blank times big as 1 inch

Answers

Answer:

5 inches is 5 times as big as 1 inch

please help you will get 10 points and brainliest. and explain your answer.

Answers

Answer:

Top prism = 262 in.² Bottom prism = 478 in.²

Step-by-step explanation:

top prism:

front + back: 5 x 3 = 15

sides: 19 x 4 x 2 = 152

bottom: 19 x 5 = 95

15 + 152 + 95 = 262

bottom prism:

front + back: 5 x 6 x 2 = 60

sides: 19 x 6 x 2 = 228

top + bottom: 19 x 5 x 2 = 190

60 + 228 + 190 = 478

At the beginning of year 1, Paolo invests $500 at an annual compound
interest rate of 4%. He makes no deposits to or withdrawals from the
account.
Which explicit formula can be used to find the account's balance at the
beginning of year 5? What is the balance?

Answers

Answer:

  see below

Step-by-step explanation:

The way the problem is worded, we expect "n" to represent the year number we're at the beginning of. That is the initial balance is that when n=1, and the balance at the beginning of year 5 (after interest accrues for 4 years) is the value of obtained when n=5.

After compounding interest for 4 years, the balance will be ...

  500·1.04^4 = 584.93

The matching answer choice is shown below.

Answer:

b

Step-by-step explanation:

help me please!!!! Dan's car depreciates at a rate of 8% per year. By what percentage has Dan's car depreciated after 3 years? Give your answer to the nearest percent.

Answers

Answer:

22%

Step-by-step explanation:

Car's price is reduced by 8% or 0.92 times a year

after 3 years it will make:

0.92³= 0.778688≈ 0.78 times

or

0.78 = 1- 0.22price decrease = 22%

Answer:

Hello!

Here is your answer:

22%

I hope I was able to help you.  If not, please let me know!

Step-by-step explanation:

Graph the line with slope -1/3 and y -intercept 6 .

Answers

Answer:

plot a point at 6 up from (0,0) and then go down one and over three places then plot another point- and so on - and so on

Step-by-step explanation:

To graph the line using the slope and intercept, first understand what the slope and intercept mean:

Slope is how steep or flat the line appears on the graph.

A very high or low slope (100 or -100) will be very steep on the graph.A slope very close to zero (0.0001 or -0.0001) will be very flat on the graph.A positive slope will travel northeast and southwest (for linear equations).A negative slope will travel northwest and southeast (for linear equations).

The y-intercept is the point at which the line hits the y-axis. In this equation, the line hits the y-axis at positive 6, which means that the point is (0, 6).

You can use a method called "rise over run" to graph. The slope is negative one over three, so the line will "rise" negative one units after "running" three units.

So, for every one unit down, the line will travel three units to the right.

Graph this from the point (0, 6), your y-intercept, and plot the points according to the slope:

A cell phone company is offering 2 different monthly plans. Each plan charges a monthly fee plus an additional cost per minute. Plan A: $ 40 fee plus $0.45 per minute Plan B: $70 fee plus $0.35 per minute a) Write an equation to represent the cost of Plan A b) Write an equation to represent the cost of Plan B c) Which plan would be least expensive for a total of 100 minutes?

*Please Show Work*

Answers

Answer:

Plan A would be the least expensive

Step-by-step explanation:

Plan A= $0.45x100= 45, 45+40=$85

Plan B= $0.35x100= 35, 35+70= %105

(Each plan is for 100 minutes)

List the four possible results of the combinations of decisions and true states of nature for a test of hypothesis. Which of the following lists the four possible results of the combinations of decisions and true states of nature for a test of​ hypothesis? A. Reject Upper H 0H0 when Upper H 0H0 is​ true; insufficient evidence to reject Upper H 0H0 when Upper H 0H0 is​ true; reject Upper H 0H0 when Upper H Subscript aHa is​ true; insufficient evidence to reject Upper H 0H0 when Upper H Subscript aHa is true B. Reject Upper H 0H0 when Upper H 0H0 is​ true; insufficient evidence to reject Upper H 0H0 when Upper H Subscript aHa is​ true; reject Upper H Subscript aHa when Upper H Subscript aHa is​ true; insufficient evidence to reject Upper H 0H0 when Upper H 0H0 is true C. Reject Upper H 0H0 when Upper H Subscript aHa is​ true; insufficient evidence to reject Upper H 0H0 when Upper H 0H0 is​ true; reject Upper H Subscript aHa when Upper H 0H0 is​ true; insufficient evidence to reject Upper H 0H0 when Upper H Subscript aHa is true D. Reject Upper H 0H0 when Upper H 0H0 is​ true; insufficient evidence to reject Upper H 0H0 when Upper H 0H0 is​ true; reject Upper H 0H0 when Upper H Subscript aHa is​ true; accept Upper H Subscript aHa when Upper H 0H0 is true

Answers

Answer:

A

Step-by-step explanation:

The combinations of decisions and true states of nature for a test of​ hypothesis is given below:

When [tex]H_o[/tex] is True, Accept [tex]H_o[/tex]When [tex]H_o[/tex] is True, Reject [tex]H_o[/tex] (Type I Error)When [tex]H_o[/tex] is False, Accept [tex]H_o[/tex] (Type II Error)When [tex]H_o[/tex] is False, Reject [tex]H_o[/tex]

Note that when [tex]H_o[/tex] is False, then the Alternate Hypothesis, [tex]H_a[/tex] is True.

Therefore Option A gives the possible combinations.

The possible choices in Option A are ordered below to correspond to the results above.

Insufficient evidence to reject [tex]H_o[/tex]  when [tex]H_o[/tex]  is​ true; Reject [tex]H_o[/tex]  when [tex]H_o[/tex]  is​ true; Type 1 Error Insufficient evidence to reject [tex]H_o[/tex]  when [tex]H_a[/tex]  is true -Type II Error Reject [tex]H_o[/tex]  when [tex]H_a[/tex]  is​ true;

Solve for x
A) 36
B) 54
C) 72
D) 84
Ayo help a girl out

Answers

Answer:

72°

Step-by-step explanation:

This is called an isosceles triangle. This means that the 2 angles related to the equal sides, are also equal. Hence, the answer is 72°

Answer:

A

Step-by-step explanation:

Since it is isosceles triangle (two equal sides) therefore, there are 2 equal angles too which at the base (72°)

The total angle of triange is 180°

So 180-72-72=36°

Use the quadratic formula to find both solutions to the quadratic equation given below. 2x^2+3x-5=0

Answers

Answer:

[tex] x =\frac{-b \pm \sqrt{b^2 -4ac}}{2a}[/tex]

Where a = 2 , b= 3, c= -5, replacing we have this:

[tex]x =\frac{-3 \pm \sqrt{(-3)^2 -4(2)(-5)}}{2*2}[/tex]

And simplifying we got:

[tex] x = \frac{-3 \pm \sqrt{49}}{4}[/tex]

And the two solutions are:

[tex] x_1 = \frac{-3+7}{4}= 1[/tex]

[tex] x_2 = \frac{-3-7}{4}= -\frac{5}{2}[/tex]

And the correct options are:

B and C

Step-by-step explanation:

We have the following equation given:

[tex] 2x^2 +3x -5=0[/tex]

And if we use the quadratic formula given by:

[tex] x =\frac{-b \pm \sqrt{b^2 -4ac}}{2a}[/tex]

Where a = 2 , b= 3, c= -5, replacing we have this:

[tex]x =\frac{-3 \pm \sqrt{(-3)^2 -4(2)(-5)}}{2*2}[/tex]

And simplifying we got:

[tex] x = \frac{-3 \pm \sqrt{49}}{4}[/tex]

And the two solutions are:

[tex] x_1 = \frac{-3+7}{4}= 1[/tex]

[tex] x_2 = \frac{-3-7}{4}= -\frac{5}{2}[/tex]

And the correct options are:

B and C

Answer:

B and C

Step-by-step explanation:

The graph of Ax), shown below, resembles the graph of G(X) = x, but it has
been stretched and shifted. Which of the following could be the equation of
Fx)?

Answers

Answer:

sorry'but I don't know the answer

When converting measurements in the metric system, you can move the decimal point to the left or to the right. Why? Select all that apply. A. When converting from smaller to larger units, you are dividing by a power of 10. B. Moving a decimal point is the same as adding or subtracting. C. The metric system is based on powers of 10. D. When converting from larger to smaller units, you are multiplying by a power of 10.

Answers

Answer:

This has multiple answers, A, C, And D

Step-by-step explanation:

Answer:

It is definitely A, C, and D.

Step-by-step explanation:

I just answered this question and got it right. I hope this helps and please mark brainliest!

Alguien me puede ayudar con esto por favor!!!!

Answers

Answer:

8 + 15i

Step-by-step explanation:

(-2 + 3i) + 2(5 + 6i) =

= -2 + 3i + 10 + 12i

= 8 + 15i

At the beginning of the season,jamie pays full price for a ticket to see the panthers,her favorite baseball team.

Answers

Corrected Question

At the beginning of the season, Jamie pays full price($49.64) for a ticket to see the panthers, her favorite baseball team. Ticket prices decrease $0.41 for every game the panthers lose this season. the panthers currently have 33 wins and 31 losses.

(a)Represent the total change in the cost of a ticket given their losses.

(b) What is the cost of a ticket for the next game they play?

Answer:

(a)$(49.64-0.41x)

(b)$36.93

Step-by-step explanation:

(a)Cost of a Full Ticket =$49.64

Let x be the number of losses

The ticket price reduces by $0.41 for every loss

Therefore:

Ticket Price after x losses =$(49.64-0.41x)

Therefore, total change in the cost of a ticket given their losses=$(49.64-0.41x)

(b)For this season the Panthers has suffered 31 losses.

Number of Losses, x=31

Therefore, cost of a ticket for the next game they play

= $(49.64-0.41*31)

=49.64-12.71

=$36.93

Other Questions
the sum of the three numbers in 2003,two of the numbers are 814 and 519 what is the third number The Riteway Ad Agency provides cars for its sales staff. In the past, the company has always purchased its cars from a dealer and then sold the cars after three years of use. The companys present fleet of cars is three years old and will be sold very shortly. To provide a replacement fleet, the company is considering two alternatives: Purchase alternative: The company can purchase the cars, as in the past, and sell the cars after three years of use. Ten cars will be needed, which can be purchased at a discounted price of $27,000 each. If this alternative is accepted, the following costs will be incurred on the fleet as a whole: Annual cost of servicing, taxes, and licensing $ 4,300 Repairs, first year $ 2,200 Repairs, second year $ 4,700 Repairs, third year $ 6,700At the end of three years, the fleet could be sold for one-half of the original purchase price.Lease alternative: The company can lease the cars under a three-year lease contract. The lease cost would be $70,000 per year (the first payment due at the end of Year 1). As part of this lease cost, the owner would provide all servicing and repairs, license the cars, and pay all the taxes. Riteway would be required to make a $15,000 security deposit at the beginning of the lease period, which would be refunded when the cars were returned to the owner at the end of the lease contract.Riteway Ad Agencys required rate of return is 20%.Required:1. Use the total-cost approach to determine the present value of the cash flows associated with each alternative. (Any cash outflows should be indicated by a minus sign. Round discount factor(s) to 3 decimal places.) what is the positive solution for the equation A sphere has a surface area equal to 125 square feet. Find the length of the diameter of the sphere. Round your answer to the nearest hundredth. Use 3.14 to approximate pi. How do you think to build a fire will end?? Which idea is a fundamental principle of the Articles of Confederation What is the mid point of the segment shown below please help Use synthetic division to solve [tex]\frac{3x^{4} +6x^{3} +2x^{2} + 9x + 10 }{x+2}[/tex]. What is the quotient? The diagram below shows a 5.0-kilogram bucket of water being swung in a horizontal circle of 0.70-meter radiusat a constant speed of 2.0 meters per second.5.0-kg Bucket0.70 mThe magnitude of the centripetal force on the bucket of water is approximately1) 5.7 N2) 14 N3) 29 N4) 200 N Okay so I need help figuring out how to do this table 16 of 22Save & ExitSample Space: TutorialActivityIn this exercise, you'll use the formula for the probability of the complement of an event.Another game you've set up at casino night involves rolling a fair six-sided die followed by tossing a fair coin. In this game, players earn pointsdepending on the number they get on the die and which side of the coin turns up. For example, the player earns 5 points for getting (2, tails).Question 1Find the total number of possible outcomes in each trial of this game. Solve for B. R = x(A + B) please help me out here *image attached A person needs to fill 20 water jugs with a hose. Filling the first 2 jugs has taken 3 minutes. How long to finish filling the remaining jugs who is our third president???????? 1). Calculate the mass of hydrogen peroxide needed to obtain 0.460 L of oxygen gas at STP2H2O2(aq) 2H2O(l) +O2(g)2) 1.Use the reaction shown to calculate the mass of iron that must be used to obtain 0.500 L of hydrogen at STP.3Fe(s) + 4H2O(l) Fe3O4(s) + 4H2(g) Transaction is an action or series of actions the execution of which should lead to a consistent database state from another consistent database state. Discuss which properties that transactions should have for their correct executions. Provide two examples to support your answer. The perimeter of the rectangle playing field is 432 yards the length of the field is 4 yards less than triple the width The perimeter of the rectangle playing field is 432 yards the length of the field is 4 yards less than triple the width. What is the length and width in yards? An oil company fills 1/10of a tank in 1/5, hour. At this rate, which expression can be used to determine how long it will take for the tank to fill completely?1010 hours01. 5 hours10.110hour55-10 hours The following is FALSE about adolescent calcium needs:About 50% of the calcium in your bones is built up while you are a teenager.Women are more likely than men to get osteoporosis.Teens do not need to worry about getting enough calcium.All of the above are true.