The men's world record (as of 2007) for swimming 1500 m in a long course pool is 14 min34.56 s. At this rate, how many seconds would it take the men's world record holder to swim 0.850mi ? (1mi=1609 m) time:

Answers

Answer 1

At the rate of the men's world record for swimming 1500 m in a long course pool, it would take the record holder approximately 900.44 seconds to swim 0.850 mi.

First, we need to convert 0.850 miles to meters using the conversion factor 1 mile = 1609 meters.

Distance in meters:

0.850 mi * 1609 m/mi ≈ 1367.65 m

Next, we can use the given time of 14 minutes and 34.56 seconds to calculate the time it would take to swim 1367.65 meters.

Time in seconds:

14 minutes * 60 seconds/minute + 34.56 seconds ≈ 840.56 seconds

Therefore, it would take approximately 840.56 seconds for the swimmer to swim 1367.65 meters.

Now, to find the time it would take to swim 0.850 miles (1367.65 meters), we can set up a proportion:

Time for 1367.65 meters / 1367.65 meters = Time for 0.850 miles / 0.850 miles

Let's denote the time for 0.850 miles as x.

x / 1367.65 ≈ 840.56 / 1367.65

Cross-multiplying and solving for x:

x ≈ (840.56 / 1367.65) * 1367.65

x ≈ 900.44 seconds

Therefore, at the rate of the men's world record for swimming 1500 m in a long course pool, it would take the record holder approximately 900.44 seconds to swim 0.850 miles.

To know more about conversion factor refer here:

https://brainly.com/question/30567263#

#SPJ11


Related Questions

1) How many kJ of energy are released to form one mole of 133Cs from protons and neutrons if the atom has a mass of 132.905429 amu? Please remember to include the mass of electrons in the calculation. Given the mass of a proton is 1.007825 amu

Answers

The energy released to form one mole of 133Cs from protons and neutrons is 2.61 x 10⁻⁵ kJ.

The energy released to form one mole of 133Cs from protons and neutrons can be found using the equation: E = Δmc² where E is the energy, Δm is the change in mass, and c is the speed of light. The first step is to calculate the mass of the Cs atom by adding the mass of the protons, neutrons, and electrons: Mass of Cs = (55 protons x 1.007825 amu/proton) + (78 neutrons x 1.008665 amu/neutron) + (55 electrons x 0.00054858 amu/electron)Mass of Cs = 132.905429 amu.

The mass of the Cs atom is 132.905429 amu, so the change in mass required to form one mole of Cs is:Δm = (133 moles x 132.905429 amu/mole) - (133.0000 moles x 1.007825 amu/mole) - (78.0000 moles x 1.008665 amu/mole) - (55.0000 moles x 0.00054858 amu/mole)Δm = 17.3304 amu The energy released is:

E = Δmc²

E = (17.3304 amu) x (1.66054 x 10⁻²⁷ kg/amu) x (2.99792 x 10⁸ m/s)²

E = 2.6117 x 10⁻ⁱ² J/mol Converting this to kilojoules per mole gives:2.6117 x 10⁻¹² J/mol x (1 kJ/1000 J) x (1 mol/1 mol) Therefore, the energy released to form one mole of 133Cs from protons and neutrons is 2.61 x 10⁻⁵ kJ.

To know more about energy released visit:-

https://brainly.com/question/28395807

#SPJ11

You need to prepare a sodium hydroxide (NaOH) solution with a pH of 12.00 at 25 ∘
C A) Calculate the concentration of sodium hydroxide solution. B) How many grams of sodium hydroxide (NaOH) do you need to prepare 500.0 mL of this solution? C) Calculate the hydronium ion concentration in the above solution.

Answers

The concentration of the NaOH solution required to achieve a pH of 12.00 is 0.01 M. One would need approximately 0.200 grams of sodium hydroxide (NaOH) to prepare 500.0 mL of a 0.01 M solution. The hydronium ion concentration in the NaOH solution with a pH of 12.00 is approximately 1.0 x [tex]10^(^-^1^2^)[/tex] M.

a,

pOH = 14 - pH

= 14 - 12.00

= 2.00

Since pOH is equal to the negative logarithm of the hydroxide ion concentration (OH⁻), we can calculate the concentration of OH⁻.

[OH⁻] = 1[tex]0^(^-^p^O^H^[/tex]) = [tex]10^-^2[/tex]= 0.01 M

Therefore, the concentration of the NaOH solution required to achieve a pH of 12.00 is 0.01 M.

b,

moles = concentration (M) × volume (L)

moles of NaOH = 0.01 M × 0.500 L = 0.005 mol

The molar mass of NaOH is 22.99 g/mol (Na) + 16.00 g/mol (O) + 1.01 g/mol (H) = 39.99 g/mol.

mass of NaOH = moles × molar mass = 0.005 mol × 39.99 g/mol ≈ 0.200 g

Therefore, you would need approximately 0.200 grams of sodium hydroxide (NaOH) to prepare 500.0 mL of a 0.01 M solution.

c, 

[H₃O⁺] × [OH⁻] = 1.0 x [tex]10^(^-^1^4^)[/tex] [tex]M^2[/tex]

Given that [OH⁻] is 0.01 M, we can calculate [H₃O⁺]:

[H₃O⁺] = (1.0 x [tex]10^(^-^1^4^)[/tex] [tex]M^2[/tex]) / 0.01 M

≈ 1.0 x [tex]10^(^-^1^2^)[/tex] M

Learn more about the PH concentration here

https://brainly.com/question/30953914

#SPJ4

Determine whether the following ionic compounds would be soluble (S) or insoluble (I). 1. \( \mathrm{Ba}\left(\mathrm{NO}_{3}\right)_{2}= \) 2. \( \mathrm{KOH}= \) 3. \( \mathrm{MgCrO}_{4}= \) 4. \( \

Answers

Ionic compounds that would be soluble are Ba(NO₃)₂, KOH, Na₃PO₄ and (NH₄)₂S.

Ba(NO₃)₂: Soluble (S). Most nitrate (NO3-) compounds are soluble, including barium nitrate (Ba(NO3)2).

KOH: Soluble (S). Most hydroxide (OH-) compounds are soluble, including potassium hydroxide (KOH).

MgCrO4: Insoluble (I). Most chromate (CrO4^2-) compounds are insoluble, including magnesium chromate (MgCrO4).

Na3PO4: Soluble (S). Most phosphate (PO4^3-) compounds are soluble, including sodium phosphate (Na3PO4).

(NH4)2S: Soluble (S). Most sulfide (S^2-) compounds are soluble, including ammonium sulfide ((NH4)2S).

Ca(OH)2: Insoluble (I). Most hydroxide (OH-) compounds are insoluble, including calcium hydroxide (Ca(OH)2).

In summary:

Ba(NO3)2 = S

KOH = S

MgCrO4 = I

Na3PO4 = S

(NH4)2S = S

Ca(OH)2 = I

Complete Question:

Soluble or Insoluble Determine whether the following ionic compounds would be soluble (S) or insoluble (I). 1. Ba(NO3)2 2. KOH 3. MgCrO4 4. Na3PO4 5. S(NH4)2 6. S(OH)2.

To know more about Ionic compounds, refer here:

https://brainly.com/question/489030#

#SPJ11

limestone (calcium carbonate) particles are stored in 50-l bags. the void fraction of the particulate matter is 0.30 (liter of void space per liter of total volume) and the specific gravity of solid calcium carbonate is 2.93. (a) estimate the bulk density of the bag contents (kg caco3/liter of total volume)

Answers

To estimate the bulk density of the bag contents, we need to consider the void fraction and the specific gravity of solid calcium carbonate. Therefore, the estimated bulk density of the bag contents is 2.05 kg CaCO3/liter of total volume.

Bulk density is defined as the mass of the solid material divided by its total volume, including both the solid particles and the void spaces. First, let's calculate the volume of the void spaces in the bag. The void fraction of 0.30 means that 30% of the total volume is void space. So, the volume of the void spaces can be calculated as:

Volume of void spaces = 0.30 × 50 liters = 15 liters

Now, let's calculate the volume occupied by the solid particles:

Volume of solid particles = Total volume - Volume of void spaces

= 50 liters - 15 liters

= 35 liters

Next, we can calculate the mass of the solid calcium carbonate in the bag by multiplying the volume of solid particles by the specific gravity:

Mass of solid particles = Volume of solid particles × Specific gravity

= 35 liters × 2.93

= 102.55 kg

Finally, we can calculate the bulk density:

Bulk density = Mass of solid particles / Total volume

= 102.55 kg / 50 liters

= 2.05 kg CaCO3/liter of total volume

To know more about gravity

https://brainly.com/question/9934704

#SPJ4

which reaction will shift to the left in response to a decrease in volume? group of answer choices n2 (g) 3h2 (g) 2 nh3 (g) 2 so3 (g) 2 so2 (g) o2 (g) 4 fe (s) 3 o2 (g) 2 fe2o3 (s) 2hi (g) h2 (g) i2 (g) h2 (g) cl2 (g) 2 hcl (g)

Answers

The reaction that will shift to the right in response to a decrease in volume is:

2HI (g) ⇄ H₂ (g) + I₂ (g)

When the volume of the system is decreased, the pressure increases. According to Le Chatelier's principle, the system will shift in the direction that reduces the number of moles of gas to counteract the increase in pressure.

In this reaction, there are two moles of gas on the left side (2HI) and only one mole of gas each on the right side (H₂ and I₂). Therefore, by decreasing the volume and increasing the pressure, the reaction will shift to the right, favoring the formation of more H₂ and I₂ and reducing the number of moles of gas and equilibrium.

The reaction that will shift to the right in response to a decrease in volume is:

2HI (g) ⇄ H₂ (g) + I₂ (g)

To know more about equilibrium:

https://brainly.com/question/31828725

#SPJ4

the effect of chlorofluorocarbons on the depletion of the ozone layer is well known. the use of substitutes, such as ch3ch2f(g), fluoromethane, has largely corrected the problem. calculate the volume occupied by 0.208 mol of ch3ch2f(g) at a temperature of 298.15 k and a pressure of 1 atm.

Answers

The volume occupied by 0.208 mol of CH₃CH₂F(g) at a temperature of 298.15 K and a pressure of 1 atm is approximately 5.38 liters.

To calculate the volume occupied by 0.208 mol of CH₃CH₂F(g) at a temperature of 298.15 K and a pressure of 1 atm, we can use the ideal gas law equation:

PV = nRT

Where:

P = Pressure (in atm)

V = Volume (in liters)

n = Number of moles

R = Ideal gas constant (0.0821 L·atm/(mol·K))

T = Temperature (in Kelvin)

Let's plug in the given values and solve for V:

P = 1 atm

n = 0.208 mol

R = 0.0821 L·atm/(mol·K)

T = 298.15 K

V = (nRT) / P

V = (0.208 mol × 0.0821 L·atm/(mol·K) × 298.15 K) / 1 atm

V ≈ 5.38 liters

Therefore, the volume occupied by 0.208 mol of CH₃CH₂F(g) at a temperature of 298.15 K and a pressure of 1 atm is approximately 5.38 liters.

To know more about volume :

https://brainly.com/question/32204237

#SPJ4

Rank each set of substituents from high to low priority using Cahn-Ingold-Prelog ranking rules. A. -OH, -Cl, -H, -CH3CH₂CH3 B. -NH₂, -OH, -H, -Br C. -OH, -CH₂SH, -CH₂CH3, -CH3

Answers

The rank of each set of substituents from high to low priority using Cahn-Ingold-Prelog ranking rules are:

A:  -Cl > -OH > [tex]-CH_3CH_2CH_3[/tex] > -H

B:  -Br > -OH >[tex]-NH_2[/tex] > -H

C: [tex]-CH_2SH[/tex] > -OH > [tex]-CH_2CH_3[/tex] > [tex]-CH_3[/tex]

Using the Cahn-Ingold-Prelog (CIP) ranking rules, we can rank the substituents from high to low priority based on atomic number and the concept of "priority" groups.

A. -OH, -Cl, -H, [tex]-CH_3CH_2CH_3[/tex]

The ranking for this set would be:

-Cl (highest priority due to chlorine having a higher atomic number than oxygen)

-OH (second highest priority)

[tex]-CH_3CH_2CH_3[/tex] (third highest priority)

-H (lowest priority)

B. [tex]-NH_2[/tex], -OH, -H, -Br

The ranking for this set would be:

-Br (highest priority due to bromine having a higher atomic number than nitrogen, oxygen, and hydrogen)

-OH (second highest priority)

[tex]-NH_2[/tex] (third highest priority)

-H (lowest priority)

C. [tex]-OH, -CH_2SH, -CH_2CH_3, -CH_3[/tex]

The ranking for this set would be:

[tex]-CH_2SH[/tex] (highest priority as sulfur has a higher atomic number than oxygen and carbon)

-OH (second highest priority)

[tex]-CH_2CH_3[/tex] (third highest priority)

[tex]-CH_3[/tex] (lowest priority)

In summary, the ranking of the substituents from high to low priority would be:

A. -Cl > -OH > [tex]-CH_3CH_2CH_3[/tex] > -H

B. -Br > -OH > [tex]-NH_2[/tex] > -H

C. [tex]-CH_2SH > -OH > -CH_2CH_3 > -CH_3[/tex]

To know more about substituents refer here

https://brainly.com/question/31973757#

#SPJ11

Aspirin-like compounds were originally obtained from the bark of which tree? A. oak B. willow C. cinnamon D. maple E. elm

Answers

Aspirin-like compounds were originally obtained from the bark of the willow tree (option B).

The use of willow bark for medicinal purposes dates back thousands of years and is attributed to its natural content of salicin, a chemical compound that has pain-relieving and anti-inflammatory properties.

The ancient Egyptians, Greeks, and Native Americans used willow bark to alleviate pain and reduce fever. In the 19th century, chemists discovered how to extract and synthesize salicylic acid from willow bark, which led to the development of modern-day aspirin.

Aspirin, or acetylsalicylic acid, is a derivative of salicylic acid and is widely used as an analgesic, anti-inflammatory, and antipyretic medication. The correct option is B.

To know more about Aspirin, refer here:

https://brainly.com/question/14988384#

#SPJ11

Which of the following is the conjugate acid of H2PO4−?
A.
H3PO4
B.
H4PO4−
C.
HPO4−2
D.
PO43−

Answers

The conjugate acid of [tex]H_2PO_4[/tex]− is option a) [tex]H_3PO_4.[/tex]

The terms in this answer are "conjugate acid" and "[tex]H_2PO_4[/tex].What is a conjugate acid?A conjugate acid is an acid that creates another acid by accepting a proton (H+ ion).Consider the following reaction:HF +[tex]H_2O[/tex] ⇌ [tex]H_3O[/tex]+ + F-The acid HF and the base F- are two conjugate acid-base pairs.

When the acid HF donates a proton (H+ ion), the base F- becomes the conjugate acid because it accepts the proton (H+ ion). [tex]H_3O[/tex]+ is the conjugate acid of [tex]H_2O[/tex] because it gains a proton (H+ ion) from water.Conjugate base is a species formed when an acid donates a proton. In comparison to a particular base, it has one less proton.

On the other hand, the acid and base pairs are known as a conjugate acid-base pair.In the provided options, [tex]H_3PO_4.[/tex] is the only compound which can gain a proton to form the conjugate acid. Therefore, the correct option is A. [tex]H_3PO_4.[/tex]

Know more about conjugate acid     here:

https://brainly.com/question/30225097

#SPJ8

Determine the energy of 1.10 mol of photons for each of the following kinds of light. (Assume three significant figures.) Part A infrared radiation (1460 nm) Express your answer using three significant figures. Part B visible light ( 505 nm ) Express your answer using three significant figures. ultraviolet radiation (135 nm ) Express your answer using three significant figures. View Avallable Hint(s)

Answers

The energy of 1.10 mol of photons is E ≈ 1.47 x 10⁻¹⁸ J

To determine the energy of photons, you can use the equation E = hc/λ, where E is the energy, h is Planck's constant (6.626 x 10⁻³⁴ J·s), c is the speed of light (3.00 x 10⁸ m/s), and λ is the wavelength of light.

For Part A, infrared radiation with a wavelength of 1460 nm, we can calculate the energy as follows:

E = (6.626 x 10⁻³⁴ J·s) * (3.00 x 10⁸ m/s) / (1460 x 10⁸ m)
E ≈ 1.36 x 10¹⁹ J

For Part B, visible light with a wavelength of 505 nm:

E = (6.626 x 10³⁴ J·s) * (3.00 x 10⁸ m/s) / (505 x 10⁻⁹ m)
E ≈ 3.92 x 10⁻¹⁹ J

For Part C, ultraviolet radiation with a wavelength of 135 nm:

E = (6.626 x 10⁻³⁴ J·s) * (3.00 x 10⁸ m/s) / (135 x 10⁻⁹ m)
E ≈ 1.47 x 10⁻¹⁸ J

To know more about photons visit-

https://brainly.com/question/33017722

#SPJ11

To determine the energy of 1.10 mol of photons, we use the equation E = hc/λ, where E is the energy, h is Planck's constant, c is the speed of light, and λ is the wavelength of the light in meters.
For each type of light, we convert the given wavelength from nanometers to meters and use the equation to calculate the energy per photon. Finally, we multiply this value by Avogadro's number to get the energy for 1.10 mol of photons.

The energy of photons can be determined using the equation E = hc/λ, where E is the energy, h is Planck's constant (6.626 x [tex]10^{-34}[/tex] J·s), c is the speed of light (3.00 x [tex]10^8[/tex] m/s), and λ is the wavelength of the light in meters.

Part A: Infrared radiation (1460 nm)
To find the energy of 1.10 mol of infrared photons, we need to convert the wavelength from nanometers (nm) to meters (m).
1460 nm = 1460 x 10^-9 m

Now we can use the equation E = hc/λ:
E = (6.626 x [tex]10^{-34}[/tex] J·s)(3.00 x [tex]10^8[/tex] m/s) / (1460 x [tex]10^{-9}[/tex] m)

Calculating this equation will give us the energy per photon in Joules (J). Multiply this value by Avogadro's number (6.022 x [tex]10^{23}[/tex]) to get the energy for 1.10 mol of photons.

Part B: Visible light (505 nm)
Similarly, we convert the wavelength of visible light from nanometers (nm) to meters (m):
505 nm = 505 x [tex]10^{-9}[/tex] m

Using the same equation, E = hc/λ, we can calculate the energy per photon in Joules (J) for visible light.

Part C: Ultraviolet radiation (135 nm)
Again, we convert the wavelength of ultraviolet radiation from nanometers (nm) to meters (m):
135 nm = 135 x [tex]10^{-9}[/tex] m

Using the equation E = hc/λ, we can calculate the energy per photon in Joules (J) for ultraviolet light.

Learn more about Ultraviolet radiation: https://brainly.com/question/30556527

#SPJ11

What is the mass in grams of Al that was reacted with excess HCl if 6.20 L of hydrogen gas were collected at STP in the following reaction? 2Al(s)+6HCl(aq)→2AlCl 3 (aq)+3H 2 ( g)

Answers

As per the details given, the mass of aluminum that was reacted with excess HCl is approximately 4.96 grams.

Here, it is given that:

Volume of hydrogen gas collected (VH₂) = 6.20 L

Molar volume of gas at STP = 22.4 L/mol

Using the molar volume at STP, we can calculate the number of moles of hydrogen gas:

moles of H₂ = VH₂ / molar volume

moles of H₂ = 6.20 L / 22.4 L/mol

moles of H₂ ≈ 0.277 mol

moles of Al = (moles of H2 * 2) / 3

moles of Al = (0.277 mol * 2) / 3

moles of Al ≈ 0.184 mol

mass of Al = moles of Al * molar mass of Al

mass of Al = 0.184 mol * 26.98 g/mol

mass of Al ≈ 4.96 g

Thus, the mass of aluminum that was reacted with excess HCl is approximately 4.96 grams.

For more details regarding moles, visit:

https://brainly.com/question/15209553

#SPJ4

In one gravimetric analysis, a sample that weighed 0.810 g is analysed for its phosphorous (P) content by precipitating the phosphorous as Mg₂P₂O, The precipitate is filtered, washed and weighed. The mass of the precipitate is found to be 0.4250 g. a. Give two advantages of gravimetric analysis over volumetric analysis. b. Why must the precipitate be washed? c. Calculate the percentage of P.

Answers

The advantages of gravimetric analysis over volumetric analysis are highlighted, including its high accuracy and insensitivity to interferences. In the context of precipitates, it is essential to wash them to remove impurities that can affect the accuracy of results. The calculation of the percentage of phosphorous (P) in a sample is explained using the formula and given data

Following is the answer for Advantages of Gravimetric Analysis over Volumetric Analysis, and the washing of precipitates:

High Accuracy: Gravimetric analysis is known for its high accuracy. It involves the measurement of mass, which can be done with great precision using analytical balances. This makes gravimetric analysis suitable for determining the amount of a particular substance in a sample.

Insensitivity to Interferences: Gravimetric analysis is generally less affected by interferences from other substances present in the sample compared to volumetric analysis. This is because gravimetric analysis relies on the physical separation and weighing of the precipitate, which is less influenced by chemical reactions or the presence of other substances.

b. The Precipitate Must be Washed:

The precipitate must be washed to remove any impurities or contaminants that may have been carried over during the filtration process. These impurities can affect the accuracy and purity of the final result. Washing the precipitate ensures that unwanted substances are eliminated, leaving behind only the pure precipitate for accurate determination of the analyte.

c. Calculation of the Percentage of P:

To calculate the percentage of phosphorous (P) in the sample, we need to use the following formula:

%P = (mass of P in the precipitate / mass of the sample) x 100

Given:

Mass of the sample = 0.810 g

Mass of the precipitate (Mg₂P₂O) = 0.4250 g

To determine the mass of P in the precipitate, we need to consider the stoichiometry of the compound. In Mg₂P₂O, there are two phosphorous atoms.

Molar mass of P = 30.97 g/mol

Molar mass of Mg₂P₂O = 222.57 g/mol

Mass of P in the precipitate = (2 x molar mass of P) / molar mass of Mg₂P₂O) x mass of the precipitate

Mass of P in the precipitate = (2 x 30.97 g/mol) / 222.57 g/mol) x 0.4250 g

Finally, we can calculate the percentage of P:

%P = (mass of P in the precipitate / mass of the sample) x 100

%P = (mass of P in the precipitate / 0.810 g) x 100

Substituting the values, we can calculate the percentage of P.

To know more on gravimetric analysis: https://brainly.com/question/6163057

#SPJ11

1. 3O2(g) ⇌ 2O3(g) ; if 10.0g of O2 is at equilibrium with 7.50g of O3 calculate Kp if the total pressure is 1.10atm.
A. 2.95
B. 0.339
C. 0.499

Answers

The value of the equilibrium constant, Kp, is 0.339. The correct option is B.

The equilibrium constant can be determined using the equilibrium partial pressures of O2 and O3 when the total pressure is 1.10 atm. The equation given is:
3O2(g) ⇌ 2O3(g)
The equilibrium partial pressure of O2 is:
P(O2) = (10.0 g / 32.00 g/mol) × (1.10 atm) / (10.0 g / 32.00 g/mol + 7.50 g / 48.00 g/mol)
P(O2) = 0.343 atm
The equilibrium partial pressure of O3 is:
P(O3) = (7.50 g / 48.00 g/mol) × (1.10 atm) / (10.0 g / 32.00 g/mol + 7.50 g / 48.00 g/mol)
P(O3) = 0.242 atm

The equilibrium constant, Kp, can now be calculated using the expression:
Kp = (P(O3))² / (P(O2))³
Substituting the values for P(O2) and P(O3) yields:
Kp = (0.242 atm)² / (0.343 atm)³
Kp = 0.339
Therefore, the value of the equilibrium constant, Kp, is 0.339. Thus, the correct option is B.

To know more about equilibrium constant visit:-

https://brainly.com/question/29809185

#SPJ11

Calculate the standard free energy change (ΔG ma ​
) for the following reaction at 298 K based on the provided equilibrium constant. Ans. ΔG m

=−8.55kd PC 3

(g)+Cl 2

(g)⇌PCl 3

(g)K=31.5

Answers

The standard free energy change (ΔGₘ°) for the reaction is -8.55 kJ/mol.

The standard free energy change (ΔGₘ°) can be calculated using the equation:

ΔGₘ° = -RT ln(K)

Where:

ΔGₘ° is the standard free energy change

R is the gas constant (8.314 J/(mol·K))

T is the temperature in Kelvin (298 K)

K is the equilibrium constant

Given that the equilibrium constant (K) is 31.5, we can substitute the values into the equation:

ΔGₘ° = -8.314 J/(mol·K) × 298 K × ln(31.5)

Converting the units of the gas constant to kJ/(mol·K) and simplifying the equation, we have:

ΔGₘ° = -(8.314 × 298 × ln(31.5)) / 1000 kJ/mol

Calculating the expression within the parentheses and converting to kJ/mol, we get:

ΔGₘ° ≈ -8.55 kJ/mol

learn more about standard free energy change here:

https://brainly.com/question/32675075

#SPJ11

How many people need to be riding on a city bus in your city on average to make it more eco-friendly than your mode of transportation? Lynx bus use Compressed Natural Gas 6.6 miles in total from my location to the location I want to go. My car MPG is 28. The distance is 4.9 miles using my car.
CH4(g)+2O2(g)⟶CO2(g)+2H2O(l)

Answers

Approximately 223 passengers would need to be riding on the city bus to make it more eco-friendly than your car for the given distances and emissions.

We need to analyze the emissions and fuel consumption of both forms of transportation to figure out how many people a city bus has to carry in order to be more environmentally friendly than your automobile.

Let's start by calculating the amount of fuel consumed by your car for a distance of 4.9 miles:

Fuel consumption (in gallons) = Distance / MPG

Fuel consumption = 4.9 miles / 28 MPG ≈ 0.175 gallons

Next, we can calculate the amount of carbon dioxide (CO₂) emitted by your car:

CO₂ emissions = Fuel consumption x CO₂ emissions factor

Assuming the CO₂ emissions factor for gasoline is around 19.64 pounds/gallon:

CO₂ emissions = 0.175 gallons x 19.64 pounds/gallon ≈ 3.43 pounds of CO₂

Let's now think about the city bus's emissions. We'll concentrate on the CO₂ emissions as you said that the Lynx bus burns compressed natural gas (CNG), which emits carbon dioxide (CO₂) and water (H₂O) when burned.

Given the balanced chemical equation:

CH₄(g) + 2O₂(g) ⟶ CO₂ (g) + 2H₂O(l)

We are aware that methane (CH₄) produces one mole of carbon dioxide (CO₂). Methane (CH₄) has a molecular weight of around 16 grams per mole, while carbon dioxide (CO₂) has a molecular weight of about 44 grams per mole.

Now, let's calculate the amount of CO₂ produced by the Lynx bus for a distance of 6.6 miles:

CO₂ emissions (in grams) = (Distance / Car's distance) x Car's CO₂ emissions

= (6.6 miles / 4.9 miles) x 3.43 pounds x (453.592 grams/pound)

= 6.98 grams of CO₂

The number of people on the bus must be taken into account in order to compare the environmental impact. Let's call the quantity of travelers "P."

To determine the threshold number of passengers needed for the bus to be more eco-friendly, we need to equate the CO₂ emissions from your car (3.43 pounds) to the CO₂ emissions from the bus (6.98 grams) multiplied by the number of passengers:

3.43 pounds = (6.98 grams x P)

Let's convert the pounds to grams (1 pound = 453.592 grams):

1555.58 grams = (6.98 grams x P)

Now, we can solve for P:

P = 1555.58 grams / 6.98 grams

P ≈ 222.73

To know more about gas emissions, refer:

https://brainly.com/question/12634507

#SPJ4

What element reacts negatively to Au

Answers

One example of an element that can react negatively with gold is fluorine (F).

Fluorine is a highly reactive nonmetal and the most electronegative element on the periodic table. It readily accepts electrons to achieve a stable electron configuration.

When fluorine reacts with gold, it can form a compound known as gold trifluoride (AuF3). Gold trifluoride is a yellow solid that is thermodynamically unstable and decomposes at room temperature.

The reactivity of fluorine towards gold is attributed to the large electronegativity difference between the two elements. Fluorine's strong electron affinity and high electronegativity allow it to oxidize gold by accepting electrons from the gold atoms. This results in the formation of AuF3.

It's important to note that the reactivity of gold with fluorine is relatively uncommon and occurs under specific conditions. Gold's unreactive nature is one of the reasons it is highly valued and widely used in jewelry, electronics, and various other applications.

For more such question on element visit:

https://brainly.com/question/18096867

#SPJ8

"1. At what temperature does the following reaction have to take
place, in order to exist at equilibrium?
H2(g) + F2(g) ⇔ 2HF(g)
ΔH = −271 kJ/mol
ΔS = −159.8 J/mol∙K

Answers

The equilibrium temperature at which the reaction H₂(g) + F₂(g) ⇔ 2HF(g) exists is 1697k

The equilibrium temperature is calculated using the equation ΔG = ΔH - TΔS, where ΔG is the change in Gibbs free energy, ΔH is the change in enthalpy, T is the temperature in Kelvin, and ΔS is the change in entropy. At equilibrium, ΔG is zero, so the equation simplifies to 0 = ΔH - TΔS.

The equation that relates temperature (T), enthalpy change (ΔH), and entropy change (ΔS) is:

ΔG = ΔH - TΔS

At equilibrium, the free energy change (ΔG) is zero. So, we can set the equation to:

0 = ΔH - TΔS

Rearranging the equation to solve for temperature (T):

T = ΔH / ΔS

Substituting the given values:

T = (-271 kJ/mol) / (-159.8 J/mol·K) = 1697 K

learn more about equilibrium temperature here:

https://brainly.com/question/31961430

#SPJ11

6. Multiple Lewis Structures can be drawn from the molecular formula C₂H5NO. Draw a Lewis Structure with one double bond, no formal charges, and one of the hydrogen atoms participating in hydrogen bonding. Show all non-bonding (lone) pairs of electrons. Draw a second Lewis Structure using the formula above with one ring, and no formal charges. Show all lone pairs of electrons.

Answers

For the molecular formula C₂H₅NO, one Lewis Structure can be drawn with one double bond, no formal charges, and one hydrogen atom participating in hydrogen bonding. Another Lewis Structure can be drawn with one ring and no formal charges.

1. Lewis Structure with One Double Bond and Hydrogen Bonding:

To draw the Lewis Structure with one double bond, no formal charges, and hydrogen bonding, we start by determining the central atom. In this case, the central atom is nitrogen (N). The carbon atoms (C) will be bonded to the nitrogen atom.

- Place the nitrogen (N) atom in the center.

- Attach two carbon (C) atoms to the nitrogen atom.

- Each carbon atom is bonded to three hydrogen (H) atoms.

- Create a double bond between one carbon atom and the nitrogen atom to satisfy the valence electrons.

The resulting structure is:

       H

        |

   H – C – N = C – H

        |

        H

In this structure, one carbon atom forms a double bond with the nitrogen atom, satisfying the valence electrons of both atoms. Additionally, one hydrogen atom (H) from the carbon atom bonded to nitrogen can participate in hydrogen bonding with another molecule.

2. Lewis Structure with One Ring and No Formal Charges:

To draw the Lewis Structure with one ring and no formal charges, we need to rearrange the atoms and bonds.

- Start with a carbon (C) atom.

- Attach another carbon (C) atom to it.

- Attach a nitrogen (N) atom to the second carbon atom.

- Attach an oxygen (O) atom to the nitrogen atom.

- Finally, attach three hydrogen (H) atoms to the carbon atoms, and one hydrogen atom to the nitrogen atom.

The resulting structure is:

      H

       |

   H – C – C – N – O

       |

       H

In this structure, a ring is formed with two carbon atoms, one nitrogen atom, and one oxygen atom. There are no formal charges in this Lewis Structure.

These two Lewis Structures satisfy the molecular formula C₂H₅NO and provide different arrangements of the atoms and bonds, illustrating the multiple forms that can be drawn for the given formula.

To know more about molecular formula refer here:

https://brainly.com/question/29435366#

#SPJ11

Provide your answers in the Text Submission box below.
The following names are incorrect. Write the correct form. (a)
3,5-dibromobenzene; (b) o-aminophenyl fluoride; (c)
p-fluorochlorobenzene.

Answers

(a) The correct name for the compound 3,5-dibromobenzene is 1,3-dibromobenzene. The numbering of the substituents on the benzene ring starts from the lowest possible position to maintain the lowest locants for the substituents.

(b) The correct name for the compound o-aminophenyl fluoride is 2-aminophenyl fluoride. The prefix "o-" indicates ortho, which implies that the amino group is located at the 1st position on the benzene ring. However, the correct locant is 2 to maintain the lowest numbering for the amino group.

(c) The correct name for the compound p-fluorochlorobenzene is 1-fluoro-4-chlorobenzene. The prefix "p-" indicates para, suggesting that the fluorine and chlorine substituents are in the 4th position. However, the correct locants are 1 and 4 to maintain the lowest numbering for the substituents.

To know more about the amino group refer here,

https://brainly.com/question/28549414#

#SPJ11

Drinking water in the USA cannot exceed 0.500 ppm mercury. What mass of mercury is present in 2.00 L of water at this concentration?

Answers

The mass of mercury present in 2.00 L of water at a concentration of 0.500 ppm is 1.00 mg.To calculate the mass of mercury present in 2.00 L of water at a concentration of 0.500 ppm (parts per million), we need to convert the concentration to a mass unit.

1 ppm is equivalent to 1 mg/L (milligram per liter), so 0.500 ppm is equal to 0.500 mg/L.

Given:

Volume of water = 2.00 L

Mercury concentration = 0.500 mg/L

To find the mass of mercury, we can use the formula:

Mass of mercury = Concentration of mercury x Volume of water

Mass of mercury = 0.500 mg/L x 2.00 L

Mass of mercury = 1.00 mg

Therefore, the mass of mercury present in 2.00 L of water at a concentration of 0.500 ppm is 1.00 mg.

To learn more about mercury click here: brainly.com/question/24257702

#SPJ11

Thinking about the two trajectories of the hydride's mechanism
(direction of its attack on the C=O), which of the two possible
products (borneol vs isoborneol) is the expected kinetic product?
Explain

Answers

The expected kinetic product in the hydride's mechanism is borneol.

In the hydride's mechanism, the attack of the hydride ion (H^-) on the carbonyl group (C=O) of a ketone or aldehyde can occur from two different directions: either from the top face or from the bottom face of the carbonyl group. These two possible trajectories are known as the syn addition and anti addition.

The kinetic product is determined by the faster reaction, which is usually the one that occurs through the lower energy transition state. In the case of the hydride's mechanism, the attack of the hydride ion on the carbonyl group typically occurs through the transition state that leads to the formation of the more stable carbocation intermediate.

In the case of borneol and isoborneol, the hydride ion attacks the carbonyl group from the top face, resulting in the formation of a more stable primary carbocation intermediate. This trajectory is favored due to the greater stabilization of the positive charge by the adjacent oxygen atom.

Therefore, the expected kinetic product is borneol, which is formed when the hydride ion attacks the carbonyl group from the top face. Isoborneol, on the other hand, is the thermodynamic product and is formed through a subsequent rearrangement of the initially formed borneol.

In summary, the expected kinetic product in the hydride's mechanism is borneol due to the lower energy transition state leading to the more stable primary carbocation intermediate.

To know more about kinetic product refer here:

https://brainly.com/question/31643864#

#SPJ11

How many grams of the non-electrolyte
C3H8O3 must be dissolved in 411g
of water to produce a solution whose calculated freezing point is
-1.00°C?

Answers

To produce a solution with a calculated freezing point of -1.00°C, approximately 20.36 grams of the non-electrolyte C₃H₈O₃ must be dissolved in 411 grams of water.

The freezing point depression of a solution can be calculated using the formula:

ΔT = Kf * m * i

Where ΔT is the change in freezing point, Kf is the freezing point depression constant for the solvent (water in this case), m is the molality of the solute, and i is the van't Hoff factor.

Since the solute in this case is a non-electrolyte, the van't Hoff factor (i) is equal to 1.

Rearranging the equation to solve for molality (m):

m = ΔT / (Kf * i)

Given that the freezing point depression (ΔT) is -1.00°C and the freezing point depression constant (Kf) for water is approximately 1.86°C/m, we can substitute these values into the equation.

m = (-1.00°C) / (1.86°C/m * 1) ≈ -0.537 m

Now, we can calculate the moles of the solute (C₃H₈O₃) using the molality (m) and the mass of water (411 g):

moles = m * kg of water

Converting the mass of water to kilograms:

kg of water = 411 g / 1000 = 0.411 kg

moles = -0.537 m * 0.411 kg ≈ -0.221 mol

Since the solute is a non-electrolyte, the number of moles is equal to the number of formula units. Therefore, we can use the molar mass of C₃H₈O₃ to calculate the mass:

mass = moles * molar mass

The molar mass of C₃H₈O₃ is approximately 92.09 g/mol.

mass = -0.221 mol * 92.09 g/mol ≈ 20.36 g

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ11

2. Balance the following chemical reaction equations. a. b 4

ci. C 4

H 9

OH(g)+6O 2

( g)→4CO 2

( g)+5H 2

O d. Ca(OH) 2

( s)+H 3

PO 4

(aq)→ +H 2

O(1) e. NaHCO 3

( s)+H 2

SO 4

(aq)→ (aq)+ (g)+H 2

O(1) f. Cd(s)+H 3

PO 4

(aq)→ (aq)+H 2

( g)

Answers

Chemical reactions involve the rearrangement of atoms, and balancing the equations is essential to ensure the conservation of matter. The provided balanced chemical equations represent different reactions, including combustion, acid-base reactions, and precipitation, demonstrating the conservation of atoms in each reaction.

a. C₄H₉OH(g) + 6O₂(g) → 4CO₂(g) + 5H₂O

b. Ca(OH)₂(s) + H₃PO₄(aq) → Ca(H₂PO₄)₂(aq) + H₂O(ℓ)

c. NaHCO₃(s) + H₂SO₄(aq) → Na₂SO₄(aq) + CO₂(g) + H₂O(ℓ)

d. Cd(s) + H₃PO₄(aq) → Cd₃(PO₄)₂(aq) + H₂(g)

The balanced chemical equations are as follows:

a. The combustion of C₄H₉OH (butanol) in the presence of oxygen produces carbon dioxide (CO₂) and water (H₂O).

b. The reaction between Ca(OH)₂ (calcium hydroxide) and H₃PO₄ (phosphoric acid) forms Ca(H₂PO₄)₂ (calcium dihydrogen phosphate) and water.

c. Sodium bicarbonate (NaHCO₃) reacts with sulfuric acid (H₂SO₄) to yield sodium sulfate (Na₂SO₄), carbon dioxide (CO₂), and water.

d. The reaction between cadmium (Cd) and phosphoric acid (H₃PO₄) produces cadmium phosphate (Cd₃(PO₄)₂) and hydrogen gas (H₂).

These balanced equations ensure that the number of atoms of each element is conserved on both sides of the equation, indicating a balanced chemical reaction.

To know more about the conservation of matter refer here,

https://brainly.com/question/30035132#

#SPJ11

A sample of Ar weighs 74.0 grams. Will a sample of S that contains the same number of atoms weigh more or less than 74.0grams ? A sample of S weighs less than 74.0 grams. A sample of S weighs more than 74.0 grams. Calculate the mass of a sample of S that contains the same number of atoms. Mass =gS

Answers

A sample of sulfur (S) that contains the same number of atoms as a 74.0 g sample of argon will weigh 74.0 grams.

The mass of a sample of sulfur (S) that contains the same number of atoms as a 74.0 g sample of argon (Ar), we need to compare their molar masses and use the concept of mole-to-mole ratios.

1. Determine the molar mass of argon (Ar):

  The molar mass of argon is approximately 39.95 g/mol.

2. Calculate the number of moles of argon:

  Moles of Ar = Mass of Ar / Molar mass of Ar

  Moles of Ar = 74.0 g / 39.95 g/mol

3. Use the mole-to-mole ratio to calculate the mass of sulfur:

  According to the balanced chemical equation, 1 mole of Ar is equivalent to 1 mole of S.

  Mass of S = Moles of S × Molar mass of S

  Mass of S = Moles of Ar × Molar mass of S

  Since the number of moles of Ar is the same as the number of moles of S, their masses are equal.

Therefore, the mass of a sample of sulfur that contains the same number of atoms as a 74.0 g sample of argon is also 74.0 grams.

To know more about atoms refer here

https://brainly.com/question/46808380#

#SPJ11

What is the mass of a 2.25 mol sample of the fertilizer ammonium hydrogen phosphate is (NH4​)2​HPO4​ 

Answers

The mass of a 2.25 mol sample of the fertilizer ammonium hydrogen phosphate is (NH4​)2​HPO4​ the mass of a 2.25 mol sample of ammonium hydrogen phosphate is approximately 297.15 grams.

To calculate the mass of a 2.25 mol sample of ammonium hydrogen phosphate ((NH4)2HPO4), we need to know the molar mass of the compound.

The molar mass of (NH4)2HPO4 can be calculated by adding up the atomic masses of all the elements present in the compound.

(NH)HPO: (2 × molar mass of N) + (8 × molar mass of H) + molar mass of P + (4 × molar mass of O)

Looking up the atomic masses of each element:

N (nitrogen): 14.01 g/mol

H (hydrogen): 1.01 g/mol

P (phosphorus): 31.00 g/mol

O (oxygen): 16.00 g/mol

Calculating the molar mass:

(2 × 14.01 g/mol) + (8 × 1.01 g/mol) + 31.00 g/mol + (4 × 16.00 g/mol) = 132.06 g/mol

Therefore, the molar mass of (NH4)2HPO4 is 132.06 g/mol.

To find the mass of a 2.25 mol sample, we can use the following formula:

Mass = Molar mass × Number of moles

Mass = 132.06 g/mol × 2.25 mol = 297.15 g

Therefore, the mass of a 2.25 mol sample of ammonium hydrogen phosphate is approximately 297.15 grams.

To know more about ammonium refer here:

https://brainly.com/question/11173657#

#SPJ11

Consider the following half reactions:
Zn2+(aq) + 2e- → Zn(s) Eo = -0.76V
Fe3+(aq) + 3e- → Fe(s) Eo = -0.036V
If these two metals were used to construct a galvanic cell:
The anode would be
The cathode would be
The cell potential would be (report answer to 2 decimal places)

Answers

The anode would be zinc (Zn) and the cathode would be iron (Fe). The cell potential would be -0.72V.

In a galvanic cell, the anode is where oxidation occurs, and the cathode is where reduction occurs. From the given half reactions, we can determine the anode and cathode materials based on their reduction potentials.

The half reaction with the more negative reduction potential is the anode, as it is more likely to undergo oxidation. In this case, the reduction potential of zinc (Zn2+ + 2e- → Zn) is -0.76V, which is more negative than the reduction potential of iron (Fe3+ + 3e- → Fe), which is -0.036V.

Therefore, zinc would be the anode and iron would be the cathode.

The cell potential is calculated by subtracting the reduction potential of the anode from the reduction potential of the cathode. In this case, -0.036V (Fe) - (-0.76V) (Zn) gives us a cell potential of -0.72V.

To know more about cell potential, refer to the link:

https://brainly.com/question/10470515#

#SPJ11

The reaction CH(g)2C₂H₂(g) has an activation energy of 262 kJ/mol. At 600.0 K, the rate constant, k, is 6.1 x 10-8 s. What is the value of the rate constant at 800.0 K?

Answers

The value of the rate constant (k) at 800.0 K is approximately 2.9 x 10⁻⁶ s⁻¹.

To calculate the value of the rate constant at a different temperature, we can use the Arrhenius equation, which relates the rate constant (k) to the activation energy (Ea) and the temperature (T): k = A * exp(-Ea / (RT))

Where:

k = Rate constant

A = Pre-exponential factor (frequency factor)

Ea = Activation energy

R = Gas constant (8.314 J/(mol·K))

T = Temperature in Kelvin

Given:

Activation energy (Ea) = 262 kJ/mol

Temperature (T₁) = 600.0 K

Rate constant (k₁) = 6.1 x 10⁻⁸ s⁻¹

To find the value of the rate constant (k₂) at a different temperature (T₂ = 800.0 K), we can rearrange the Arrhenius equation and solve for k₂:

k₂ = k₁ * exp((Ea / R) * (1 / T₁ - 1 / T₂))

Substituting the given values into the equation:

k₂ = (6.1 x 10⁻⁸ s⁻¹) * exp((262,000 J/mol / (8.314 J/(mol·K))) * (1 / 600.0 K - 1 / 800.0 K))

k₂ ≈ 2.9 x 10⁻⁶ s⁻¹

Therefore, the value of the rate constant at 800.0 K is approximately 2.9 x 10⁻⁶ s⁻¹.

To learn more about rate constant  here:

https://brainly.com/question/20305922

#SPJ11

- Construct a model of 1.2- dichloroethane to help draw Newman projections of the following conformations. Indicate which you think is the most stable and which the least stable -

Answers

The most stable conformation of 1,2-dichloroethane is the anti-configuration, while the least stable conformation is the gauche-configuration.

1. Start by drawing the skeletal structure of 1,2-dichloroethane, which consists of two carbon atoms connected by a single bond. Attach a chlorine atom to each carbon atom.

    Cl       Cl

     |         |

    C --- C

2. Choose one carbon atom as the front carbon (C1) and the other as the rear carbon (C2).

3. Draw a circle representing the front carbon (C1) and put the rear carbon (C2) directly behind it.

    Cl       Cl

     |         |

    C --- C

      C2

      |

     (C1)

4. Now, draw the substituents attached to each carbon atom in the Newman projection.

    Cl       H

     |         |

    C --- C

      C2

      |

     (C1)

5. For the most stable conformation, the two largest substituents (in this case, the chlorine atoms) should be placed in the anti-configuration, meaning they are on opposite sides of the Newman projection.

    Cl       H

     |         |

    C --- C

      C2

      |

     (C1)

6. For the least stable conformation, the two largest substituents should be placed in the gauche-configuration, meaning they are on the same side of the Newman projection.

    Cl       H

     |         |

    C --- C

      C2

      |

     (C1)

Based on the steric interactions, the most stable conformation of 1,2-dichloroethane is the anti-configuration, where the two largest substituents (chlorine atoms) are opposite each other, minimizing steric hindrance.

The least stable conformation is the gauche-configuration, where the chlorine atoms are on the same side, resulting in increased steric hindrance and decreased stability.

To know more about conformation refer here

https://brainly.com/question/1945232#

#SPJ11

5. If you consumed polyglutamate and if you consumed food in excess of your energy needs, you would deposit some of the carbon in this foodstuff as triacylglycerols in your adipose tissue. Outline the metabolic reactions in your small intestine, liver, and adipose tissue that allow for this transfer of dietary polyglutamate to body fat (triacylglycerols). a. (3 pts) Intestinal tract: b. (3 pts) Liver: c. (3 pts) Adipose tissue:

Answers

a. Intestinal tract: Polyglutamate is broken down by enzymes into glutamate and glutamine. Glutamate is further metabolized to produce alpha-ketoglutarate, which enters the citric acid cycle for energy production. Glutamine is transported to the liver.

b. Liver: In the liver, glutamine is converted back to glutamate, and some of the glutamate is used for energy production. Excess glutamate is converted to alpha-ketoglutarate, which can also enter the citric acid cycle. Alpha-ketoglutarate can then be used for fatty acid synthesis.

c. Adipose tissue: Fatty acids synthesized in the liver are packaged into triacylglycerols and transported to adipose tissue. In adipose tissue, triacylglycerols are stored as energy reserves in specialized cells called adipocytes.

These triacylglycerols can be broken down through lipolysis when the body requires energy.

a. Intestinal tract: Polyglutamate is a form of protein that needs to be broken down into smaller components for absorption and utilization. In the intestinal tract, enzymes called proteases act on polyglutamate, breaking it down into individual amino acids.

Specifically, enzymes like glutaminase and peptidases cleave the peptide bonds between the amino acids. This process results in the release of glutamate and other amino acids. Glutamate can then be transported into the bloodstream and further metabolized.

b. Liver: After absorption in the intestinal tract, glutamate is transported to the liver via the bloodstream. In the liver, glutamate can undergo several metabolic reactions.

One important reaction is the conversion of glutamate to alpha-ketoglutarate, which occurs through the action of the enzyme glutamate dehydrogenase.

This reaction releases ammonia as a byproduct. Alpha-ketoglutarate can then enter the citric acid cycle (also known as the Krebs cycle or TCA cycle), where it is further metabolized to produce energy in the form of ATP.

In the context of excess energy consumption, the liver can also use glutamate to synthesize fatty acids. Through a series of enzymatic reactions, alpha-ketoglutarate is converted to citrate, which is then transported out of the mitochondria into the cytoplasm.

In the cytoplasm, citrate is cleaved by the enzyme ATP citrate lyase to generate acetyl-CoA, which is the precursor for fatty acid synthesis. Acetyl-CoA is then used in the fatty acid synthesis pathway to produce fatty acids.

c. Adipose tissue: Fatty acids synthesized in the liver are packaged into triacylglycerols (also known as triglycerides) and transported to adipose tissue through the bloodstream.

Adipose tissue is specialized connective tissue that stores excess energy in the form of fat. In adipose tissue, fatty acids are taken up by adipocytes, which are the main cell type in adipose tissue. Inside adipocytes, fatty acids are reassembled into triacylglycerols through a process called esterification.

Triacylglycerols are then stored in specialized lipid droplets within the adipocytes. When the body requires energy, such as during periods of fasting or increased physical activity, triacylglycerols can be broken down through lipolysis.

Lipolysis is the enzymatic breakdown of triacylglycerols into fatty acids and glycerol, which can be released into the bloodstream and used as a fuel source by other tissues in the body.

To know more about "Fatty acid" refer here:

https://brainly.com/question/29593274#

#SPJ11

Arrange the following aqueous solutions in order of increasing boiling point. 0.12MK2​SO4​0.20MC6​H12​O6​ (glucose)  0.15MNa3​PO4​ a. (lowest bp) 0.20MC6​H12​O6​<0.15MNa3​PO4​<0.12MK2​SO4​ (highest bp) b. (lowest bp) 0.20MC6​H12​O6​<0.12MK2​SO4​<0.15MNa3​PO4​ (highest bp) c. (lowest bp) 0.12MK2​SO4​<0.20MC6​H12​O6​<0.15MNa3PO4​ (highest bp) d. (lowest bp) 0.15MNa3​PO4​<0.20MC6​H12​O6​<0.12MK2​SO4​ (highest bp) e. (lowest bp) 0.15MNa3​PO4​<0.12MK2​SO4​<0.20MC6​H12​O6​ (highest bp) 

Answers

The correct order of aqueous solutions in increasing boiling point is Option (d) 0.15 M Na₃PO₄ < 0.20 M C₆H₁₂O₆ < 0.12 M K₂SO₄.

What is boiling point?

The temperature at which the vapor pressure of the liquid is equal to the external pressure acting on the liquid surface is known as the boiling point. The boiling point of a liquid is influenced by the intermolecular forces that exist between the liquid molecules.

Boiling point elevation:When a non-volatile solute, such as salt or sugar, is dissolved in a solvent, such as water, the boiling point of the solution increases. When a solute is added to a solvent, the solution's boiling point is raised. The boiling point elevation is directly proportional to the number of solute particles in the solution.Boiling point elevation can be calculated using the following formula:

ΔTb = Kbm. where ΔTb is the change in boiling point, Kb is the molal boiling point elevation constant, m is the molality of the solution, and b is the molal boiling point elevation constant.

So, the correct answer is option D.

To know more about aqueous solutions click on below link :

https://brainly.com/question/1382478#

#SPJ11

Other Questions
What are some of the problems that arise with the collection of physical evidence? How can these problems be mitigated and what legal issues arise if they are not mitigated? We are interested in the first few Taylor Polynomials for the function f(x) = 4e +5e- centered at a = 0. To assist in the calculation of the Taylor linear function, T(x), and the Taylor quadratic function, T(1), we need the following values: f(0) = f'(0) = f''(0) = Using this information, and modeling after the example in the text, what is the Taylor polynomial of degree one: Ti(z) = What is the Taylor polynomial of degree two: T(x) = Air is kept in a tank at pressure Po = 689 KPa abs and temperature To = 17C. If one allows the air to issue out in a one-dimensional isentropic flow, the flow per unit area at the exit of the nozzle where P = 101.325 KPa is ____ kg/m-s. For air, Use R = 287 J/kg-K and Mol. Wt. = 29.1 *Express your answers in whole significant figure without decimal value and without unit* The total cost function for a good is given by \[ T C(Q)=3 Q^{2}-6 Q+200 \] Find the marginal cost function and determine the minimum total cost. Air at the Earth's surface always flows faster than airflow aloft. moves from regions of high pressure to regions of low pressure. moves from regions of low density to regions of high density. moves from regions of low pressure to regions of high pressure. contains more moisture than air aloft. Connect with 4 elements of Risk Management and explain how they apply and correlate Shirin Elahi's "Here be Dragons" literature.HERE BE DRAGONS: EXPLORING THE UNKNOWN UNKNOWNSShirin Elahipp. 168-184 (17 pages) when documenting the findings from a physical examination of the head and neck, what will the nurse include when describing the client's head? 1. My grandfather goes swimming every day. He is 87. 2. The house has just been opened to the public. It was built in 1883. 3. Jack spends a lot of time with his grandchildren. He is retired now. 4. We want to see the new Tom Carter film. It was released on Friday. 5. When I left, they threw me a party. It was a complete surprise. 6. My birthday turned out to be a wonderful day! It was my 10th. 7. They went to a concert at the new arena. It was built last year. 8. The global warming conference ended without agreement. It was held in N.Y. 9. Dublin is my favorite city. It is the capital of Ireland. 10. This smartphone takes great photos. I bought it last week. 11. Ferraris are very expensive. They are made in Italy. 12. Russell Crowe was born in New Zealand. He starred in "Gladiator". 1 . What is Decision? What is decision making process?Explain with suitable example2. What is communicationprocess? Give example?3.. What are different types & functions of communication? Explain communicationprocess with diagram ? 10. Refer to Scenario . As a result of the new restaurant, existing restaurant owners in Boston are likely to experience a a. product-variety externality, which is a negative externality. b. produc when will you leave this place (change into passive voice) Evaluate the improper iterated integral 0[infinity] yy(x 2+y 2) 3/2arctan(y/x) 2+(x 2+y 2) 1/21dxdy. Help me plssssssssssssssss How does the Cuban Missile Crisis show that cooler heads prevailed"? exercise: random variables versus numbers 2 points possible (graded) let be a random variable that takes integer values, with pmf . let be another integer-valued random variable and let be a number. a) is a random variable or a number? What are related service providers of an onlinetutoring company? 1 kg of nitrogen (N) gas at 140 K and 10 MPa undergoes a Joule-Thomson expansion to 1 MPa. For this purpose a throttle valve is used and the expansion happens rapidly and adiabatically. For the above system, a) Show that Joule-Thomson expansion is an isenthalpic process. b) Calculate the enthalpy and temperature of nitrogen, and the fraction of vapour and liquid, leaving the throttle valve by using the nitrogen pressure- enthalpy diagram provided. c) Calculate how much heat needs to be removed from nitrogen after it has undergone Joule-Thomson expansion as explained in a) to achieve full liquefaction at the same pressure, i.e. 1MPa. Suppose a plate with uniform density p = 1 occupies the region between the graph of y = sin x + 1 and the x-axis in the interval [0, p/ 2]. Which one of the following is closest to the y-coordinate of the center of mass of this plate? 1. explain how multiprogramming is made possible for these models. how is this implemented? 2. with no multiprogramming, why is the input queue needed? why is the ready queue needed. 3. what aspect of an operating system is the model representing? 4. what performance measures does the model compute? 5. after changing some of the parameters in the model (the workload) and executing again the model: 6. what changes in the results do you notice? A linkage of two anomeric carbons is found in: gentiobiose. cellobiose. sucrose chitin. amylose