the motion of a particle along a straight line is represented by the position versus time graph above. at which of the labeled points on the graph is the magnitude of the acceleration of the particle greatest?

Answers

Answer 1

Point A has the largest magnitude of acceleration as compared to other points on the position verses time graph.

On the graph, A is the point where magnitude of the acceleration of the particle is greatest as compared to other positions on the graph because the height of point A is the largest as compared to other points of the graph.

The graph shows at which point acceleration of an object is higher and lower so we can conclude that point A has the largest magnitude of acceleration as compared to other points on the position verses time graph.

Learn more about acceleration here: https://brainly.com/question/933224

Learn more: https://brainly.com/question/25887663


Related Questions

1. Una carga Q1 = + 12 μC se coloca a una distancia r = 0.024 m desde una carga Q2 = + 16 μC. a) Determina la magnitud de la fuerza electrostática que actúa sobre las dos cargas, Q1 y Q2. b) ¿Es la fuerza la atracción o repulsión? 2. Determina la intensidad del campo eléctrico a una distancia radial de r = 48 mm desde una carga de Q = 24 μC. 3. Una carga Q1 = 24 mC se coloca a una distancia r = 0.032 m desde una carga Q2 = - 12 μC. a. Determina la cantidad de energía potencial eléctrica que tiene la carga Q1. b. Determina el potencial eléctrico en la posición de Q2.

Answers

Answer:

1. a. 3,000 N

b. Repulsión

2. 46.875 × 10⁶ N/C

3. a. 81,000 J

b. 6.75 × 10⁹ V

Explanation:

1. Los parámetros dados son;

Q₁ = +12 μC, Q₂ = +16 μC

La distancia entre las cargas, r = 0.024

La magnitud de la fuerza electrostática, F, entre cargas se da como sigue;

[tex]F = k \times \dfrac{Q_1 \cdot Q_2}{r^2}[/tex]

Donde, k = constante de Coulomb = 9.0 × 10⁹ N · m² / C²

Por lo tanto, obtenemos;

F = 9.0 × 10⁹ × 12 × 10⁻⁶ × 16 × 10⁻⁶ / 0.024² = 3.000

La magnitud de la fuerza electrostática, entre las cargas, F = 3000 N

(b) Dado que tanto Q₁ como Q₂ son cargas positivas, y las cargas iguales se repelen entre sí, la fuerza es la repulsión.

2) La intensidad de un campo eléctrico, E, se da como sigue;

[tex]E = \dfrac{k \cdot Q}{r^2}[/tex]

La magnitud de la carga, Q = 24 μC

La distancia donde se mide el campo, r = 48 mm = 0.048 m

Por lo tanto, E = 9.0 × 10⁹ × 12 × 10⁻⁶ / 0.048² = 46,875,000 N / C

La intensidad de un campo eléctrico, E = 46,875,000 N / C = 46.875 × 10⁶ N / C

3. La magnitud de las cargas son;

Q₁ = 24 mC

Q₂ = -12 μC

La distancia entre las cargas, r = 0.032 m

un. El potencial eléctrico de una carga, [tex]U_E[/tex] , se da de la siguiente manera;

[tex]U_E = k \times \dfrac{Q_1 \cdot Q_2}{r}[/tex]

Por lo tanto;

[tex]U_E[/tex] = 9.0×10⁹ × 24 × 10⁻³ × (-12) × 10⁻⁶ /0.032 = -81,000

La energía potencial eléctrica entre la carga, Q₁ y Q₂= -81,000 J

b. El potencial eléctrico de Q₁ en Q₂, V₁ = [tex]k \times \dfrac{Q_1 }{r}[/tex]

Por lo tanto, V₁ = 9.0×10⁹ × 24 × 10⁻³/0.032 = 6.75 × 10⁹

El potencial eléctrico de Q₁ en Q₂, V₁ = 6.75 × 10⁹ V

the power station uses some of its waste thermal energy to hear water for houses in a nearby town. State one problem of using waster energy in this way if the power station is far from town. Suggest a way of reducing this problem​

Answers

Answer:

Explanation:

By the time the hot water gets to the place where it can be used for heating, it will have lost a great deal of energy to the surroundings.

The way to prevent that from happening is to insulate the pipeline with fiber glass like house insulation. Of course since this is a physics question and not an engineering problem, you could move the power station closer to the houses to be heated.

The use of Insulating Layers with low Conduction Coefficients and radii greater than Critical Radius diminish Losses and gives important Savings in terms of Energy Efficiency.

The main problem of Transportation of Waste Energy through Long Distances is the heat transfer between the Fluid flowing through the Tube and Surroundings. Heat Losses are directly proportional to the Distance travelled by the Fluid.

A possible way to minimize this Problem is to isolate outer surface of Tubes with materials with low Conduction Coefficients. at Critical Radius, in which Heat Losses reach its theoretical Maximum, from which Heat Transfer tends to diminish at greater radii.

According to the Theory of Heat Transfer, the Critical Radius of the Insulating Layer is equal to:

[tex]r_{c} = \frac{k}{h}[/tex] (1)

Where:

[tex]k[/tex] - Conduction coefficient, in watts per meter-Kelvin.[tex]h[/tex] - Convection coefficient, in watts per square meter-Kelvin.

Using materials with low Conduction Coefficient minimize Thickness requirements and, therefore, overall costs tends to sink when [tex]r > r_{c}[/tex].

Hence, the use of Insulating Layers with low Conduction Coefficients and Radii greater than Critical Radius diminish Losses and gives important Savings in terms of Energy Efficiency.

Name the type of motion executed by the motion of the moon around the earth.

Answers

Answer:

The motion of the moon around the earth is circular motion

Explanation:

state physical quantity represented by the gradient of a displacement - time graph

Answers

Answer:

velocity

Explanation:

this is because velocity has both magnitude and direction

Squids rely on jet propulsion to move around in water. A 1.5 kg squid at rest suddenly expels 0.12 kg of water backward to quickly get itself moving forward at 2.8 m/s. If other forces (such as the drag force on the squid) are ignored, what is the speed with which the squid expels water

Answers

Answer:

The speed of water is 32.2 m/s .

Explanation:

Mass of squid, M = 1.5 kg

mass of water, m = 0.12 kg

velocity of squid, V = - 2.8 m/s

Let the speed of water is v.

Use the conservation of momentum,

Momentum before expelling the water  momentum after expelling water

M x 0 = (M - m) x V + m x v

0 = - (1.5 - 0.12) x 2.8 + 0.12 v

3.864 = 0.12 v

v = 32.2 m/s

Object A has a mass of 5 kg and a velocity of 6 m/s to the east while Object 1 point B has a mass of 12 kg and velocity 0.6 m/s also to the east. What is the momentum of the system? (Let east be positive)
help plss I got family

Answers

Answer:

Momentum of system = 37.2 Kgm/s.

Explanation:

Given the following data;

Mass A = 5 kgVelocity A = 6 m/sMass B = 12 kgVelocity B = 0.6 m/s

To find the momentum of the system;

Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.

Mathematically, momentum is given by the formula;

Momentum = mass * velocity

For object A;

Momentum A = 5 * 6

Momentum A = 30 Kgm/s

For object B;

Momentum B = 12 * 0.6

Momentum B = 7.2 Kgm/s

Next, we would determine the momentum of this system using the formula;

Momentum of system = Momentum A + Momentum B

Substituting the values into the formula, we have;

Momentum of system = 30 + 7.2

Momentum of system = 37.2 Kgm/s.

Define SI units. Also mention their importance. SI unit The​

Answers

Answer:

SI unit is an internationally accepted system and have the same value all over the world .

I don't know the importance sotry

Answer:

SI unit is an internationally accepted system that have same value all over the world.

hai vật chuyển động ngược chiều qua A với B cùng lúc, ngược chiều để gặp nhau . Vật qua A có vận tốc 10m/s, qua B có vận tốc 15m/s. AB=100m
a, lấy trục tọa độ là đường thẳng AB, gốc tọa độ ở B , có chiều dương từ A sang B , gốc thời gian là lúc chúng cùng đi qua A và B . Lập phương trình chuyển động của hai xe
b, xác định vị trí , thời điểm 2 xe gặp nhau
c, xác định vị trí , thời điểm 2 xe cách nhau 25m

Answers

Answer:

wah wats this again

Explanation:

Bhai mujhe samaj nahi ah Raha

Kya Bolne Chahtaa hu tum

Answer:

bạn vẽ ra rồi làm

Explanation:

An ant moves towards the plane mirror with speed of 2 m/s & the mirror is moved towards the ant with the same speed. What is the relative velocity between the ant and its image?​

Answers

Speed of ant-V_a=2m/sSpeed of mirror =v_b=2m/s

We know

[tex]\boxed{\sf Relative\:velocity(V_{AB})=V_A-V_B}[/tex]

[tex]\\ \sf\longmapsto V_{AB}=2-2[/tex]

[tex]\\ \sf\longmapsto V_{AB}=0m/s[/tex]

The vector difference between the velocities of two bodies : the velocity of a body with respect to another regarded as being at rest  compare relative motion

[tex]Relative velocity $\left(\mathrm{V}_{\mathrm{AB}}\right)=\mathrm{V}_{\mathrm{A}}-\mathrm{V}_{\mathrm{B}}$$$\begin{aligned}&\longmapsto \mathrm{V}_{\mathrm{AB}}=2-2 \\&\longmapsto \mathrm{V}_{\mathrm{AB}}=0 \mathrm{~m} / \mathrm{s}\end{aligned}$$[/tex]

What is relative velocity and its unit?

The relative velocity of an object with respect to another is the velocity with which one object moves with respect to another object. The unit of velocity can be referred to as the ratio of unit of distance and that of time. The SI unit of Relative velocity is meter per second.

What is absolute velocity?

The concept of absolute velocity is mainly used in turbomachinery design and defines the velocity of a fluid particle in relation to the surrounding, stationary environment. Together with the relative velocity (w) and the circumferential speed (u), it forms the velocity triangle.

To learn more about relative velocity, refer

https://brainly.com/question/24430414

#SPJ2

What is the right hand rule for magnetic Force?

Answers

Answer:

The right hand rule states that, to find the direction of the magnetic force on a positive moving charge, the thumb of the right hand point in the direction of v, the fingers in the direction of B, and the force (F) is directed perpendicular to the right hand palm.

Explanation:

pls mark brainliest

Hope this helps u

Two rams run toward each other. One ram has a mass of 44 kg and runs south with a speed of 6 m/s, while the other has a mass of 50 kg and runs north with a speed of 3 m/s. What will the momentum of the system made up of the two rams be after they collide? Assume the total momentum of the system is conserved.
A. 114 kg-m/s south
B. 414 kg-m/s south
C. 414 kg m/s north
D. 114 kg-m/s north

Answers

Answer = D. 114 kg-m/s north

why do flames go upwards​

Answers

Answer:

Easy search it on g o o g l e

A train travels 600 kilometers in 1 hour. What is the train's velocity in meters/second?

Answers

here's the answer to your question

Two Carnot air conditioners, A and B, are removing heat from different rooms. The outside temperature is the same for both rooms, 314 K. The room serviced by unit A is kept at a temperature of 292 K, while the room serviced by unit B is kept at 298 K. The heat removed from either room is 4430 J. For both units, find (a), (b) the magnitude of the work required and (c), (d) the magnitude of the heat deposited outside for A and B conditioners respectively

Answers

Answer:

(a)  333.77 J

(b) 237.85 J

(c) 4763.77 J

(d) 4667.85 J

Explanation:

Temperature of source, TH = 314 K

Temperature of A, Tc = 292 K

Temperature of B, Tc' = 298 K

heat taken out, Qc = 4430 J

Let the heat deposited outside is QH and QH' by A and B respectively.

[tex]\frac{Q_H}{Q_c}=\frac{T_H}{T_c}\\\\Q_H = \frac{4430\times314}{292}=4763.77 J[/tex]

Now

[tex]\frac{Q_H'}{Q_c}=\frac{T_H}{T_c'}\\\\Q_H' = \frac{4430\times314}{298}=4667.85 J[/tex]

(a) Work done for A

W = QH - QC = 4763.77 - 4430 = 333.77 J

(b) Work done for B

W' = QH' - Qc = 4667.85 - 4430 = 237.85 J

(c) QH = 4763.77 J

(d) QH' = 4667.85 J

3.7 kg of a saturated water vapor at 0.4 MPa is isothermally cooled until it is a saturated liquid. Calculate the amount of heat rejected during this process in MJ. (Report your answer in 3 decimal places.)

Answers

Answer:

7.894 MJ

Explanation:

Given that:

The mass of the saturated water vapor = 3.7 kg

The pressure of the saturated water vapor = 0.4 MPa

From saturated properties of steam tables when the pressure is at 0.4 Mpa

The enthalpy in (kJ/kg);

hf = 604.7 kJ/kg

hg = 2738.1 kJ/kg

The rejected heat during this process is:

Q = m(hg - hf)

Q = 3.7(2738.1 - 604.7) kJ/kg

Q = 3.7(2133.4) kJ/kg

Q = 7893.58 kJ/kg

Q = 7.894 MJ

Plutonium-32 has a half-life of 14.2 days. After 99.4 days, how much of what was originally a 499.2 gram sample remains?


14 grams

3.9 grams

35.7 grams

0.71 grams

Answers

Answer:

3.9 gm remains

Explanation:

499.2 ( 1/2)^(99.4/14.2)   = 3.9 gm

A spring has a spring constant of 5 N/m and is stretched 10 m. What its U,?
a. 50 J
b. 70 J
c. 90 J
d. 250 J

Answers

Answer

I am not sure but it is may be 50J

I hope that's, this answer is fine.

Water falls down as a stream from a tap. Why does it not scatter?​

Answers

Answer:

as it hits the ground it's dispersed and this causes it to move in different directions

describe the forest ecosystem with examples​

Answers

A forest ecosystem describes the community of plants, animals, microbes and all other organisms in interaction with the chemical and physical features of their environment: Specifically, a terrestrial environment dominated by trees growing in a closed canopy — a forest, in other words.

Hope this helps you buddy! :)

The needle in the following diagram rotates around a fixed point in the middle. Based on the information given, what way will the needle rotate when the current is applied?

Answers

Answer:

nods 40th anniversary rid off e 49en9 snns

An astronaut on Pluto attaches a small brass ball to a 1.00-m length of string and makes a simple pendulum. She times 10 complete swings in a time of 257 seconds. From this measurement she calculates the acceleration due to gravity on Pluto. What is her result

Answers

Answer:

The acceleration due to gravity at Pluto is 0.0597 m/s^2.

Explanation:

Length, L = 1 m

10 oscillations in 257 seconds

Time period, T = 257/10 = 25.7 s

Let the acceleration due to gravity is g.

Use the formula of time period of simple pendulum

[tex]T = 2\pi\sqrt{\frac{L}{g}}\\\\25.7 = 2 \times 31.4\sqrt{\frac{1}{g}}\\\\g = 0.0597 m/s^2[/tex]

The image shows a landform created by Earth’s forces.

A dip in a mountain range between two plates.

Which describes this landform?

anticline
shearing
syncline
tension

Answers

The term that best describes the landform "dip in a mountain range" is C. Syncline.

Syncline is a term to refer to a fold of the Earth's crust caused by the tectonic effects of the earth's dynamics. A synclinal fold is characterized by being a concave fold, that is, in the shape of a U.

According to the above, answers A, B and D are not correct options because they refer to different shapes of the Earth. Therefore, the landform shown is syncline.

Learn more at: https://brainly.com/question/17137827

Answer: C

Explanation: E2022

A particle makes 800 revolution in 4 minutes of a circle of 5cm. Find
i. it's period
ii. Angular Velocity
iii. Linear Velocity
iv. It's acceleration
PLEASE FORMULAE SHOULD BE WRITTEN CLEARLY.
YOU CAN SNAP AND SEND

Answers

Answer:

i) The period of the particle is 0.3 seconds

ii) The angular velocity is approximately 20.94 rad/s

iii) The linear velocity is approximately 1.047 m/s

iv) The centripetal acceleration is approximately 6.98 m/s²

Explanation:

The given parameters are;

The number of revolution of the particle, n = 800 revolution

The time it takes the particle to make 800 revolutions = 4 minutes

The dimension of the circle = 5 cm = 0.05 m

Given that the dimension of the circle is the radius of the circle, we have;

i) The period of the particle, T = The time to complete one revolution

T = 1/(The number of revolutions per second)

∴ T = 1/(800 rev/(4 min × 60 s/min)) = 3/10 s

The period, T = 3/10 seconds = 0.3 seconds

ii) The angular velocity, ω = Angle covered/(Time)

800 revolutions in 4 minutes = Angle of (800 × 2·π) in 4 minutes

∴ ω = (800 × 2·π)/(4 × 60) = 20·π/3

The angular velocity, ω = 20·π/3 rad/s ≈ 20.94 rad/s

iii) The linear velocity, v = r × ω

∴ The linear velocity, v = 0.05 m × 20·π/3 rad/s = π/3 m/s ≈ 1.047 m/s

iv) The centripetal acceleration, [tex]a_c[/tex] = v²/r

∴ The centripetal acceleration, [tex]a_c[/tex] = (π/3)²/(0.05) = 20·π/9

The centripetal acceleration, [tex]a_c[/tex] = 20·π/9 m/s² ≈ 6.98 m/s²

A bullet of mass of 50g is moving with the velocity of 200km/h .calculate the kinetic energy of the bullet .​

Answers

Not sure if this it completely right but here’s what I got: 77.16050617284 J

Answer:

is 10³

Explanation:

cuz the formula of KE is 1/2mv²

covert 50g to kg first then plug in the formula

1/2 × 0.05 × 200 = 10³ J

What comes before Action-reaction?

Answers

These two forces are called action and reaction forces and are the subject of Newton's third law of motion. Formally stated, Newton's third law is: For every action, there is an equal and opposite reaction. The statement means that in every interaction, there is a pair of forces acting on the two interacting objects.

A 750 kg National Geographic Drone is rising vertically up into the atmosphere at constant speed. The lift force pushing it upward is 125% of its weight. The drone reaches the cruising speed almost immediately. It takes 25 seconds for the drone to reach a height of 250m starting from the surface.
a. What is the mechanical energy of the drone at the surface?
b. What is the mechanical energy of the drone at the 150 m height?
c. Is the mechanical energy of the drone conserved, increased, or decreased. Explain your choice.
d. What is the work done by each force acting on the drone?

Answers

Answer:

a. 0

b. 1.103625 MJ

c. Conserved

d. 1.103625/n MJ where n = The number of forces

Explanation:

The mass of the drone, m = 750 kg

The upward lift force = 125% of the weight of the drone

The time it takes the drone to reach a height of 250 m = 25 seconds

a. The mechanical energy = The kinetic energy + Potential energy

Therefore, given that the drone stars motion from the surface and was initially at rest, the mechanical energy at the surface = 0

b. The mechanical energy at height, h = 150 m, ME₁₅₀ = The potential energy gained = m·g·h

Where;

g = The acceleration due to gravity = 9.81 m/s²

∴ ME₁₅₀ = 750 kg × 9.81 m/s² × 150 m = 1103625 J = 1.103625 MJ

c. The mechanical energy is equivalent to the potential energy of the drone at the 150 m height, therefore, it is conserved

d. The work done by the force = The energy gained

Therefore, where there are n number of forces, the work done by each force = 1.103625/n MJ

A car and a truck collide in an intersection and the merged wreck continues along. During the collision. both kinetic energy and momentum are conserved.B. neither kinetic energy not momentum is conserved.C. momentum is conserved but not kinetic energy.D. kinetic energy is conserved but not momentum.E. conservation depends upon the details of the collision.

Answers

Answer:

C. Momentum is conserved but not kinetic energy.

Explanation:

This case represents an entirely inelastic collision, that is, a collision between the car and the truck that reduces total kinetic energy of the entire system, whereas linear momentum is conserved. Hence, correct answer is C.

Which of the following statements are true when it comes to impairment?

Answers

Answer:

Reduction in recoverable amount

Explanation:

Impairment of an asset happens when there is drastic reduction in recoverable amount of the asset. Long term assets are at risk of impairment because their carrying values may exceed the fair value. The business record it as a loss in assets value.

what is the economic application of changes in states of matter

Answers

Answer:

Changes of state are physical changes in matter. They are reversible changes that do not change matter's chemical makeup or chemical properties. For example, when fog changes to water vapor, it is still water and can change back to liquid water again.

Turbine blades are rotated by the steam in the steam turbine.The water at the high temperature get converted into the steam used to rotate the turbine blades.

What is state?

The property of any system on a specified point is known as the state of the system.Pressure,temperature are the properties of the system.

They are reversible modifications that do not alter the chemical composition or characteristics of matter.

The steam turbine blades are turned by the steam. The high-temperature water is turned to steam, which is utilized to rotate the turbine blades.

When fog transforms into water vapor, for example, it is still water and may transform back into liquid water.

Hence the steam turbine is the economic application of changes in states of matter.

To learn more about the state refer to the link;

https://brainly.com/question/15858706

#SPJ2

5. Tại sao khi lặn ta luôn cảm thấy tức ngực và càng lặn sâu thì cảm giác tức ngực càng tăng? A. Ap suất của nước giảm ​​B. Ap suất không khí tăng C. Ap suất không khí giảm ​​D. Ap suất của nước tăng

Answers

Answer:

c and d

Explanation:

obviously kksxsxksxkskxkskxksxksxsxsxsxsxsxsxs

Other Questions
The value of w??????? Answer the following question What is love ???Please don't spam An engineer is writing above the HTML page that currently displays a title message in large text at the top of the page . The engineer wants to add a subtitle directly underneath that is smaller than the title but still longer than most of the text on page Which factor would speed up a chemical reaction? (Choose all that apply)Decreasing particle sizeIncreasing the temperatureDecreasing the temperatureIncreasing particle size Date Page If the product of two identical number is 1024, find one of the numbers X ^2 + 2x + y + 6y = 15 The observation is sometimes erratic with intravenous administration? Yumi believes that he has a microchip planted in his brain that allows aliens to control his thoughts and actions. He also believes that law enforcement agencies are trying to hack into this microchip to stop him from telling the world about the existence of aliens. Identify a characteristic of schizophrenia that Yumi is exhibiting. Carl is listening to his colleague give an overview of the store's new vacation policy. Which behavior can Carl exhibit to best demonstrate that he is paying attention to what his colleague is saying? a) Tap his finger on his knees b) Confirm what's being said with the person next to him c) Summarize back what he heard at the end of his colleague's overview d) Say "yes, okay" frequently ESPAOL 2 : MY COMMUNITY : 02.09 EVALUACIN ORAL Alain is a sales representative for an established awnings manufacturer. Business is good, but he is concerned that the company has spent little on new product development and has not created a new product in over five years. Without new products, Alain can market his current products only to his current customers or Multiple Choice diversify. intensify his prototyping. expand his early adopter market segment. market the same products to similar customers. Find the missing side lengthsI need help in y = ( it's not 6 I put every number and still got it wrong) welp I am getting graded for this Instructions: State what additional information is required in orderto know that the triangles in the image below are congruent for thereason givenReasory. ASAPostulate How does development bring changes in human life? Explain. Select all that apply Some disadvantages of relying solely on financial measures include that: (Check all that apply.) Multiple select question. they can encourage managers to focus too heavily on short-term goals. they can encourage managers to focus too heavily on long-term goals. some profitable opportunities may be rejected to keep return on investment high. residual income is not as effective when comparing investment centers of different sizes. they require managers to focus on too many perspectives. 2. Write down the differences and similarities between Bheja, Badghar and Guthi Evaluate 20 + 16 2 5. is it 13 18 14 23 Jackie is 8 years younger than her neighbor, Paula. The sum of their ages is 30. How old are Jackie and Paula?