The pathway to release of neurohormones follows a series of steps. Arrange the phrases from left to right to create the correct pathway for the neurohormone ADH from synthesis to release.1) ADH synthesis in supraoptic neurons2) Transport in tract in infundibulum3) Storage in axon termini in posterior pituitary4) Action potentials arrive at the axon terminals

The Balanced Chemical Equation is: Na2SO3(aq)+2HCl(aq)→H2SO3(aq)+2NaCl(aq)

What is an Equivalent point?

In an acid-base reaction, the equivalence point is when chemically equal amounts of acid and base are mixed. This is a general reaction pathway that produces a specific acid/base or salt from a mixture of other acids and bases.

This is a mixed acid-base reaction up to the equivalence point.

Aqueous Sulfurous Acid: H2SO3(aq)

Aqueous Hydrochloric Acid: NaCl(aq)

Aqueous Sodium Sulfite: Na2SO3(aq)

Aqueous Hydrochloric Acid: HCl(aq)

Therefore, the balanced formula is:

Na2SO3(aq)+2HCl(aq)→H2SO3(aq)+2NaCl(aq)

To learn more about the Equivalent point, click on the given link: https://brainly.com/question/2496608

#SPJ4

If  the vapor pressure of pure methanol at 50 °c is 400 torr. The change in vapor pressure of a solution made from 23.5 g of glycerin in 130 g of methanol at 50 °C  is 24 torr.

The vapor pressure is given as :

p = x1 p°1

The lowering in vapor pressure :

Δp = p°1 - p1

     = p°1 - x1p°1

    = p°1 ( 1 - x1)

Δp = x2 p°1

Moles of glycerin = 23.5 / 92

                              = 0.255 mol

Moles of methanol = 130 / 32

                                = 4 mol

Total moles = 0.25 + 4

                    = 4.25 mol

Mole fraction , x2 = 0.255 / 4.25

                             = 0.06

Δp = x2 p°1

     = 0.06 × 400 torr

     = 24 torr

To learn more about vapor pressure here

https://brainly.com/question/14897199

#SPJ4

HCl is a polar covalent compound.                            

The H-Cl bond is covalent, meaning that the electrons are shared between the hydrogen and chlorine atoms. However, the electron density is not evenly distributed between the two atoms. The chlorine atom is more electronegative than the hydrogen atom, meaning it attracts electrons more strongly. This causes the electrons to be more concentrated around the chlorine atom, creating a partial negative charge on the chlorine atom and a partial positive charge on the hydrogen atom. This uneven distribution of charge makes HCl a polar covalent compound.

To learn more about covalent bond:

https://brainly.com/question/2234173

#SPJ4

The timing of when lake-effect snow stops depends on several factors, including the temperature and wind patterns. Typically, lake-effect snow will stop when the temperature warms up, or when the wind direction changes so that it is no longer blowing over the lake.

Lake-effect snow is a type of precipitation that occurs when cold air moves over a large body of relatively warm water, such as a lake. The air picks up moisture from the lake and as it rises, it cools and the moisture condenses into snow.

The snowfall can be intense and localized, and it typically stops when the temperature inversion breaks down, or when the wind direction changes so that it is no longer blowing over the lake.

In general, lake-effect snow is most common in the winter and early spring, when the temperature contrast between the lake and the surrounding land is greatest. The timing of when it stops can vary depending on the specific weather conditions at the time.

Learn more about Snow from

https://brainly.com/question/15919831

#SPJ1

Answer:

The mass number of an atom is the total number of protons and neutrons in its nucleus. The mass of the atom is a unit called the atomic mass unit (amu)

If a substance contains 92 gram with a molar mass of 261.887 g/mol then it will have .351 moles of substance.

No. of moles of an atom = Given mass ÷ Molar mass

Here given mass = 92grams

Molar mass = 261.887 g/mol

By substituting the values,

Number of moles = 92 /261.887

Number of moles = 0.351 mol

To learn more about moles refer to :

https://brainly.com/question/14357742

#SPJ1

The number of moles of each reactant involved in the reaction are as follows: 1 mole of lead (II) nitrate and 2 moles of potassium iodide (option C).

A chemical reaction is a process, typically involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

According to this question, lead (II) nitrate and potassium iodide combine to form potassium nitrate and lead iodide as follows:

Pb(NO₃)₂ + 2KI → PbI₂ + 2KNO₃

It can be observe that 1 mole of lead nitrate and 2 moles of pottasium iodide reacted.

Learn more about chemical reaction at: https://brainly.com/question/3461108

#SPJ1

The number of moles of each reactant involved in the reaction is shown below:

1 mole of lead (II) nitrate and 2 moles of potassium iodide

(option C). is correct

A chemical reaction is described as a process that leads to the chemical transformation of one set of chemical substances to another.

From the queation, we can deduce that lead (II) nitrate and potassium iodide combine to form potassium nitrate and lead iodide as follows:

Pb(NO₃)₂ + 2KI → PbI₂ + 2KNO₃

Therefore, 1 mole of lead nitrate and 2 moles of potassium iodide reacted to form 2KNO₃.

Learn more about chemical reaction at: https://brainly.com/question/11231920

#SPJ1

The primary fate of the hydrogen atoms in the oxidation of glucose is reaching oxidation state I in water after going from oxidation state 0 in H2.

In essence, glycolysis splits a 6-carbon glucose molecule into two 3-carbon pyruvate molecules. NAD+ is involved in the process and captures hydrogen atoms and electrons. Any energy released will either be retained as ATP or NADH, or it will be expelled as heat.

When glucose and molecule of oxygen interact, carbon dioxide and water are created. Glucose's carbon atoms undergo oxidation. In other words, they lose an electron and go to a more oxidized state. In molecular oxygen, the oxygen atoms undergo reduction.

To know more about oxidation visit :

https://brainly.com/question/16976470

#SPJ4

Answer: The health effects of hydrochloric acid are eye, nose, and respiratory tract irritation or inflammation, pulmonary edema. I hope this helps!

Explanation: This is otherwise known as Acute inhalation exposure.

It is not possible to conclude that light carries energy by comparing the temperature of the two thermometers.

To learn more about temperature refer:

brainly.com/question/2339046

#SPJ1

Charles Law states that volume increases with temperature.

Charles law state that the volume given mass of gas varies directly with the absolute temperature of the gas when pressure is kept constant. The absolute temperature is measures with the kelvin scale.

The volume of a gas having fixed mass tends to decrease when cooled and increases when the temperature is increased. The volume of gas tends to get increased by 1/273 of its actual volume at 0° C.

The law also states that the kelvin temperature and the volume will be in direct proportion when the pressure exerted on a sample of dry gas is held constant.

Learn more about Charles law,

https://brainly.com/question/30321367

The light independent reactions occur when light is present with NADPH and ATP.

What is light independent reactions?

Carbon dioxide and energy in the form of ATP and NADPH are the prerequisites or components for light-independent processes. The light-independent processes consume these necessary components and produce glucose. The energy carriers that return from these reactions to the ones that depend on light are ADP and NADP+.

What is reactions ?

The conversion of one or more chemicals, known as reactants, into one or more new compounds, known as products, is referred to as a chemical reaction. when two or more substances interact, the arrangement of their atoms or molecules changes, resulting in the formation of one or more new substances.

Therefore, light independent reactions occur when light is present with NADPH and ATP.

Learn more about light reactions from the given link.

https://brainly.com/question/2854133

#SPJ4

The energy is coming from the battery that is in the torchlight.

In the case of an object in motion, energy is coming from the kinetic energy of the object. Kinetic energy is the energy an object possesses due to its motion. This energy is transferred to the object by an external force, such as a push or a pull, which causes the object to start moving or to change its motion.

Energy is the ability to do work and can take many forms, such as thermal, kinetic, potential, and chemical energy. Energy can be transformed from one form to another and can also be transferred from one object to another.

Therefore, In the case of an object being put into motion, energy is coming from the potential energy of the object. Potential energy is the energy an object possesses due to its position or configuration. This energy is transferred to the object by an external force, such as gravity, which causes the object to start moving or to change its motion.

Learn more about energy from

https://brainly.com/question/2003548

#SPJ1

Magnetite is black or brownish-black with a metallic luster, has a Mohs hardness of 5–6 and leaves a black streak. Small grains of magnetite are very common in igneous and metamorphic rocks.

What is meant by metamorphic ?

To learn more about metamorphic refer to

https://brainly.com/question/398139

#SPJ4

Samples A and B are metals, and samples C and D are nonmetals.

We have to note that the appearance of the object can be used to determine the kind of object that it is. We know that a metal would always have a luster and the exception here is only mercury that is a liquid metal.

On the other hand, the non metals are either liquid or they are solids that are brittle and would have a low melting and boiling point due to the lack of a crystalline structure.

Learn more about metals:https://brainly.com/question/29404080

#SPJ1

If a beaker of tetrahydrofuran is put inside a sealed tank containing tetrahydrofuran gas at 63 degrees Celsius and 810 torr, after ten minutes, the liquid in the beaker will evaporate and the amount of liquid in the beaker will decrease.

This is due to the fact that at a higher temperature and pressure, the vapour pressure of the liquid tetrahydrofuran in the beaker will increase, which means that more molecules of tetrahydrofuran will escape from the liquid phase into the gas phase. This process is known as evaporation. As more molecules of tetrahydrofuran evaporate from the liquid in the beaker, the amount of liquid in the beaker will decrease.

The pressure inside the tank is 810 torr and this pressure is greater than the vapour pressure of tetrahydrofuran at 63 degrees C, meaning that the vapour pressure of the liquid tetrahydrofuran will be less than the pressure inside the tank, it will escape to the gas phase, therefore the amount of liquid in the beaker will decrease.

Learn more about Evaporation here: https://brainly.com/question/5019199

#SPJ4

Correct option is B, The quartz pebble is rounded throughout its passage through the stream as a result of abrasion by colliding with other rocks.

In the subglacial environment, abrasion is accomplished by the sliding of debris-charged ice across the substrate. Abrasion is the process of (frictional) wear, caused by surfaces rubbing against each other.

The collision of the rock and pebble caused the pebbles to be transported through the stream. The surge in between them is caused by the rock and clashing. As a result, the edges will break off and the pebble will become smoother and rounder. Abrasion weathering is the term used to describe this form of weathering.

As a result of abrasion weathering brought on by the quartz pebble's impact with the rocks, it becomes round as it travels through the stream.

To learn more about abrasion from given link

https://brainly.com/question/15034861

#SPJ4

Since the majority of the molecules in this chemical class are created by combining carbon and water, the term "carbohydrate" derives from this.

Only the domain Eukarya contains multicellular, visible organisms like humans, animals, plants, and trees. Many microorganisms, including fungi, algae, and micro-animals, inhabit this region as well. Viruses are nonliving agents, hence they are excluded from the major categories of microorganisms. Single-celled or multicellular eukaryotic creatures are both possible.

There are three domains: Archaea, Bacteria, and Eukarya. Prokaryotic organisms fall under the domains Archaea or Bacteria, while eukaryotic organisms fall under the category Eukarya. Archaea. In terms of size and structure, archaea resemble bacteria but have a greater range of cell forms.A domain, also known as a dominion, superkingdom, realm, or empire, is the highest taxonomic rank that may be assigned to an entire group of organisms in biological taxonomy.

To learn more about carbohydrate refer to :

https://brainly.com/question/797978

#SPJ4

There are 45g in 2. 5 moles of H2O

The "counting unit" used by chemists to describe the quantity of atoms, ions, molecules, or formula units in a specific chemical sample is called a mole. The mole is comparable to other counting units you have employed in the past, such as pair (2), dozen (12), and gross (144). Avogadro's number (6.022 x 10₂₃) of molecules (or formula units) make up one mole of a substance (ionic compound).

The mass of 1 mole of a chemical is indicated by its molar mass. It provides you with the amount of grams per mole of a substance, to put it another way. Therefore, grams/mole are the units for molar mass. so to find mass of compoud you need to multiplying the moles to the mass molar

mass = moles x mass molar

mas 2.5 moles of water (H₂O) = 2.5 moles ×(2+16)g/ moles

mas 2.5 moles of water (H₂O) =45g

Learn more about mass at https://brainly.com/question/29769894

#SPJ4

The frequency of light required to remove the valence electron(s) from an atom is known as the ionization energy. The ionization energy is dependent on the atomic structure and is specific to each element.

To learn more about frequency of electron refer:

brainly.in/question/37881991

#SPJ1

The boiling point of a 2m solution of nacl in water is >100 °C. The boiling point elevation formula may be used to calculate the boiling point of a 2 M solution of NaCl in water.

Tb = Kb x m, where Kb is the boiling point elevation constant for water. >100 °C (Since the boiling point for water is 100 °C, we would expect for the boiling point of the aqueous solution to be greater than 100 °C.) which is 0.52 K kg/mol. Because the molality of a 2 M solution of NaCl is 2 mol/kg, the anticipated change in boiling point is: Tb = 0.52 K kg/mol multiplied by 2 mol/kg = 1.04 K Because the average boiling point of pure water is 100 °C (at 1 atm), the anticipated boiling point of the 2 M NaCl solution in water is:Temperature at which water boils The boiling point elevation formula may be used to calculate the boiling point of a 2 M solution of NaCl in water. Tb = Kb x m, where Kb is the boiling point elevation constant for water. the boiling point of a 2m solution of nacl in water.

learn more about NaCl  here:

https://brainly.com/question/1550455

#SPJ4

The complete question is:

Estimate the boiling point of a 2M solution of NaCl in water.

A. 100 °C

B. >100 °C

C. <100 °C

The discovery of electrons and their arrangement in atoms gave further support to Mendeleev's ideas by providing a more detailed understanding of the structure of atoms and the way in which they interact with one another.

Mendeleev proposed that elements are arranged in the periodic table according to their atomic weight and chemical properties. This arrangement allows for patterns and trends to be observed in the properties of elements and helps to predict the properties of elements that had not yet been discovered.

The discovery of electrons, which are negatively charged particles that orbit the nucleus of an atom, and their arrangement in atoms provided a more detailed understanding of the structure of atoms and the way in which they interact with one another.

It was found that the number of electrons in the outermost shell of an atom, known as the valence electrons, determines the chemical properties of an element. The number of valence electrons is related to the position of an element in the periodic table, with elements in the same group having the same number of valence electrons

Learn more about atomic weight here:

https://brainly.com/question/28007578

70g of oxygen are required to react with 20. 0 grams of octane

What does the law of conservation of mass mean?

According to the law of conservation of mass, mass is neither generated nor destroyed during a chemical process. For instance, when coal is burned, the carbon atom in it transforms into carbon dioxide. The carbon atom transforms from a solid to a gas, yet its mass remains constant.

Every chemical equation must have a product mass that is equal to the reactant mass in accordance with the law of conservation of mass. Therefore, every element must have the same amount of atoms on both sides of the equation.

2C8H18 + 25O2 → 16CO2 + 18H2O

2 moles of octane will be 2*114g i.e. 228g

25 moles of oxygen will be 25*32g i.e. 800g

228 g of octane reacts with 800 g of Oxygen,

So 20g of octane reacts with (800/228)*20g of Oxygen i.e. 70g

To learn more about  law of conservation of mass use link below:

https://brainly.com/question/13891351

#SPJ4

Answer:

A. seeds, sperm and eggs cells, or DNA

Explanation:

Germplasm are living genetic resources such as seeds or tissues that are maintained for the purpose of animal and plant breeding, preservation, and other research uses.

The principle of faunal succession is a key concept in the study of prehistoric life and the age of sedimentary rocks. It is based on the idea that the fossilized remains of different species of animals and plants found in sedimentary rocks can be used to infer the relative age of the rocks and the conditions that existed when they were formed.

The principle of faunal succession states that over time, the species of animals and plants that lived in a particular area changed and evolved. As a result, the fossilized remains of different species found in sedimentary rocks can be used to infer the relative age of the rocks.

This principle is based on the idea that the fossil record is a record of the evolution of life on Earth. In addition, the principle of faunal succession also provides insight into the ancient environment and climate. For example, the presence of certain types of fossils, such as coral reefs or tropical plants, may indicate that the area was once a warm, shallow sea.

In all, the principle of faunal succession is a powerful tool that connects prehistoric life to the age of sedimentary rocks. By studying the fossilized remains of different species found in sedimentary rocks, scientists can infer the relative age of the rocks and the conditions that existed when they were formed.

Learn more about  sedimentary rocks from

https://brainly.com/question/7437433

#SPJ1

Option ( c) is correct. MnO is most ionic. Because it has lowest magnitude positive charge.

The ionic compounds are the chemical compounds composed of ions held together by electrostatic forces. The bond is called ionic bond. The compound consists of positively charged ions called cations and the negatively charged ions called anions. Manganese oxide is most ionic because it has lower oxidation state. Lower the charge on metal more is the ionic character. larger the charge more is the covalent character. Ionic compounds are hard and brittle. It has high melting and boiling points. They are electrically insulating as solids. the ions become highly conductive when melted.  Ionic compounds can be synthesized from their constituent ions through solvent evaporation and precipitation.

To learn more about Ionic compounds please visit:

https://brainly.com/question/29730254

#SPJ4

To calculate velocity,the formula is v = x/t. Average velocity is total change in displacement divided by total change in time. v = dx/dt is the formula for instantaneous velocity.

Velocity is defined as a vector measurement of the rate and direction of motion. Put simply, velocity is the speed at which something moves in one direction. The speed of a car traveling north on a major freeway and the speed a rocket launching into space can both be measured using velocity.

As you might have guessed, the scalar (absolute value) magnitude of the velocity vector is the speed of motion. In calculus terms, velocity is the first derivative of position with respect to time. You can calculate velocity by using a simple formula that includes rate, distance, and time.

Learn more about velocity at https://brainly.com/question/18084516.

#SPJ4

6.07 x 10-2  moles of kf are contained in 347 g of water in a 0. 175 mol kg-1 kf solution

What does the word "molality" mean?

The quantity of a material dissolved in a given mass of solvent is known as its molality (m), also known as molal concentration. The moles of a solute per kilogram of a solvent are how it is defined. The word "molality" is derived from the word "molarity," which refers to a solution's molar concentration.

The mole is the volume of a system that has the same number of atoms in 0.012 kilograms of carbon 12 as there are elementary particles.

The given mass of water, m1 is 347g

Molality, m is 0.175mol/kg

347 g of water is the same as 347 ml  (since 1 ml of water has a mass of 1 gram) which is 0.347 L.

KF is therefore equal to 0.17 * 0.347 i.e. 6.07 x 10-2.

To learn more about molality use link below:

https://brainly.com/question/1370684

#SPJ4

HF is a polar covalent bond. The difference in electronegativity between hydrogen and fluorine causes the electrons in the bond to be unevenly distributed, resulting in a partial positive charge on the hydrogen atom and a partial negative charge on the fluorine atom.

This creates a polar bond rather than a nonpolar covalent bond. In a nonpolar covalent bond, the electrons are shared equally between the two atoms, resulting in no net dipole (separation of charge).

However, in a polar covalent bond, the electrons are not shared equally, resulting in a net dipole. The difference in electronegativity between the atoms causes one atom to have a stronger attraction for the electrons than the other, resulting in a partial positive charge on one atom and a partial negative charge on the other.

In the case of the HF molecule, the fluorine atom has a much higher electronegativity than the hydrogen atom.

As a result, the electron cloud is pulled more towards the fluorine atom, leaving the hydrogen atom with a partial positive charge (+) and the fluorine atom with a partial negative charge (-). This creates a polar bond with a net dipole moment, meaning that the molecule has a positive and a negative pole.

It is also important to mention that the polar nature of a covalent bond can also be determined by the molecular geometry.

The bond dipole moment is determined by the vector difference of the charges and the distance between them, so the bond dipole moment is zero in a symmetrical molecule but not in an asymmetrical one.

Learn more about covalent bond:

https://brainly.com/question/9833711

#SPJ4

Synthetic materials are material that can be made by chemical process instead of being extracted from a natural resource.

Define chemical process.

An effective way to modify one or more chemicals or chemical compounds is through a chemical process. Such a chemical process involves a chemical reaction of some kind and can happen naturally or be triggered by an external factor.

A synthetic material is one in which the components are purposefully combined to create a substance with various properties. While most synthetic materials are the consequence of chemical processes, some are created from combinations. Synthetic fibers, ceramics, polymers, artificial foods, artificial pharmaceuticals, and composites are a few examples of synthetic materials. Flexible synthetic fibers are available. They can be utilized to create apparel and other items. The synthetic fibers nylon, polyester, and rayon are some examples.

To learn more about chemical reaction use link below:

https://brainly.com/question/11231920

#SPJ4