The poh of a solution is 10. 75. What is the concentration of oh– ions in the solution?.

To estimate the Boiling point of water, we need to use the formula:

ΔG = ΔH - TΔS

where ΔG is the Gibbs free energy change, ΔH is the enthalpy change, ΔS is the entropy change, and T is the temperature in Kelvin.

At the boiling point, ΔG = 0 because the liquid and gas phases are in equilibrium. Therefore, we can set ΔG = 0 and solve for T:

ΔG = ΔH - TΔS
0 = ΔH - TΔS
T = ΔH/ΔS

For water, the enthalpy change for vaporization is ΔH = -285.8 kJ/mol, and the entropy change is ΔS = 69.91 J/mol•K. Therefore:

T = (-285.8 kJ/mol) / (69.91 J/mol•K) = -4088.5 K

This result is negative, which means that water should boil at a temperature below absolute zero, which is impossible. Therefore, we need to check our calculation.

The issue is that we used the units incorrectly. The enthalpy change is given in kJ/mol, but the entropy change is given in J/mol•K. We need to convert kJ to J by multiplying by 1000:

ΔH = -285.8 kJ/mol = -285800 J/mol

Now we can use the correct units:

T = (-285800 J/mol) / (69.91 J/mol•K) = -4090.4 K

This result is still negative, but we can see that we made a mistake in the calculation. We should have divided ΔH by ΔS in kJ/mol•K, not in J/mol•K. Therefore:

T = (-285.8 kJ/mol) / (69.91 J/mol•K / 1000) = 4077.3 K

This result is in Kelvin, and we can convert it to Celsius by subtracting 273.15:

T = 4077.3 K - 273.15 = 3804.2°C

This is a very high temperature, which is not realistic for the boiling point of water. Therefore, we need to check our assumptions.

The values given for the enthalpy change and entropy change are for standard conditions (1 atm pressure and 25°C), but the boiling point of water depends on the pressure. At higher pressures, the boiling point is higher because the vapor pressure of water increases. Therefore, we cannot estimate the boiling point of water accurately without knowing the pressure.

learn more about Boiling point of water here:

https://brainly.com/question/1416592

#SPJ11

In the balanced redox reaction in a basic solution, the coefficients in front of Cl₂ and OH⁻ are 1 and 6, respectively.

Explanation: To balance the given redox reaction in a basic solution, follow these steps:

1. Identify the half-reactions (oxidation and reduction).
2. Balance the atoms in the half-reactions.
3. Balance the charges by adding electrons.
4. Equalize the number of electrons in both half-reactions.
5. Combine the half-reactions.
6. Balance the overall reaction by adding OH⁻ and H₂O molecules.

Let's consider the reaction between ClO⁻ (chlorite ion) and Cl⁻ (chloride ion) forming Cl₂ (chlorine gas).

The half-reactions are:

Oxidation: Cl⁻ → Cl₂
Reduction: ClO⁻ → Cl⁻

Now, balance the atoms and charges:

Oxidation: 2Cl⁻ → Cl₂ + 2e⁻
Reduction: 2ClO⁻ + 2e⁻ → 2Cl⁻ + 2OH⁻

Combine the half-reactions:

2Cl⁻ + 2ClO⁻ → Cl₂ + 2Cl⁻ + 2OH⁻

Remove the common species on both sides:

2ClO⁻ → Cl₂ + 2OH⁻

Conclusion: In the balanced redox reaction in a basic solution, the coefficients in front of Cl₂ and OH are 1 and 6, respectively. The balanced equation is:

2ClO⁻ → Cl₂ + 2OH⁻

To know more about redox reaction, visit:

https://brainly.com/question/13293425

#SPJ11

If tobacco is a normal, income inelastic good, it follows that a 10 percent decrease in income will decrease quantity demanded by less than 10 percent.

The term "income elasticity of demand" describes how responsive a given good's quantity demand is to changes in the real income of the customers who purchase it. The percent change in quantity requested divided by the percent change in income is the formula for determining the income elasticity of demand. With the aid of income elasticity of demand, you may determine if a certain commodity is a luxury or a need.

Goods can be roughly categorised as inferior and normal goods depending on the values of the income elasticity of demand. desire for typical items is positively correlated with income, meaning that as incomes grow, so does the desire for those things at each price point.

The term "necessity goods" refers to goods and services that customers will purchase regardless of changes in their income levels and whose income elasticity of demand is between zero and one. The following are some examples of necessities: cigarettes, haircuts, water, and power.

Learn more about Income inelastic:

https://brainly.com/question/30464971

#SPJ4

In liquids, particles are in close proximity. The force of attraction between them tends to pull them closer together.

In liquids, particles are in constant motion and are held together by intermolecular forces. The strength of these forces determines the physical properties of the liquid, such as surface tension, viscosity, and boiling point. The intermolecular forces tend to pull the particles towards each other, causing them to be packed more closely together than in gases. This results in liquids having a fixed volume but not a fixed shape, allowing them to take the shape of their container. The strong attraction between particles also means that liquids are more difficult to compress than gases. Overall, the combination of particle motion and intermolecular forces gives liquids their unique properties and behaviour.

Learn more about particles here:

https://brainly.com/question/2288334

#SPJ11

The pH of the 0.15 M HCl solution at the very beginning of its titration with a 0.150 M NaOH solution is (A) 0.150.

At the beginning of the titration, the solution contains only HCl and its concentration is 0.15 M. HCl is a strong acid that completely dissociates in water to form H+ and Cl- ions. Therefore, the initial concentration of H+ ions in the solution is 0.15 M. When NaOH is added to the solution, it reacts with the H+ ions to form water and NaCl. As a result, the concentration of H+ ions decreases and the pH of the solution increases. However, at the very beginning of the titration, before any NaOH is added, the concentration of H+ ions is 0.15 M, which corresponds to a pH of 0.150.

learn more about HCl here:

https://brainly.com/question/29204122

#SPJ11

Therefore, the molar solubility of Ba(IO3)2 in a solution of 0.01 M Ba(NO3)2 is 5.3 x 10^-4.

To solve this problem, we need to consider the common ion effect, where the presence of Ba2+ from Ba(NO3)2 will decrease the solubility of Ba(IO3)2.

The balanced equation for the dissolution of Ba(IO3)2 in water is:

Ba(IO3)2(s) ↔ Ba2+(aq) + 2IO3-(aq)

Let x be the molar solubility of Ba(IO3)2 in the presence of 0.01 M Ba(NO3)2. Then the concentration of Ba2+ in solution is 0.01 + x, and the concentration of IO3- ions is 2x.

The solubility product expression for Ba(IO3)2 is:

Ksp = [Ba2+][IO3-]2 = x(2x)2 = 4x3

The common ion effect tells us that the solubility of Ba(IO3)2 will be reduced by the presence of Ba2+ from Ba(NO3)2. Therefore, we can write:

(0.01 + x)(2x)2 = 4x3

Simplifying and solving for x:

0.04x3 + 0.04x2 - 0.0008x = 0

x(0.04x2 + 0.04x - 0.0008) = 0

x = 0 (extraneous) or x = 5.3 x 10^-4

Therefore, the molar solubility of Ba(IO3)2 in a solution of 0.01 M Ba(NO3)2 is 5.3 x 10^-4. The answer is (C).

To know more about molar solubility click here:

https://brainly.com/question/16243859

#SPJ11

Gabapentin does not have any stereocenters in its structure. The lack of stereocenters in gabapentin's structure means that the drug exists as a single enantiomer, and there is no need to separate different stereoisomers during its synthesis or use.

What is Gabapentin?

Gabapentin is a medication used to treat epilepsy, neuropathic pain, hot flashes, and restless legs syndrome. It is a synthetic compound that was originally developed as a structural analog of the neurotransmitter gamma-aminobutyric acid (GABA).

Stereocenters are carbon atoms in a molecule that have four different substituents attached to them, which gives rise to different stereoisomers of the compound. These stereoisomers have different physical and chemical properties and may have different biological activity. However, the structure of gabapentin does not contain any carbon atoms with four different substituents attached to them, and therefore, it does not have any stereocenters.

To know more about Gabapentin, visit;

https://brainly.com/question/27961103

#SPJ4

The assumptions being made about the temperature of the gas space in the graduated cylinder are that it remains constant and is equal to the ambient temperature.

This assumption is made because it simplifies calculations and measurements involving gas properties. Since most experiments are conducted under controlled conditions, it is reasonable to assume that the temperature of the gas space remains constant. Additionally, the graduated cylinder is typically exposed to the surrounding environment, allowing the gas inside to reach equilibrium with the ambient temperature.

Assuming that the temperature of the gas space in the graduated cylinder remains constant and equal to the ambient temperature is acceptable because it simplifies the analysis and is generally valid for most experimental setups.

To know more about gas properties, visit:

https://brainly.com/question/857678

#SPJ11

The given chemical equation 2w + 3x - 3y + z, the limiting reactant can be determined by calculating the moles of each reactant and comparing them.

We need to first understand what a limiting reactant is. A limiting reactant is the reactant that gets consumed completely during a chemical reaction, thereby limiting the amount of products that can be formed. In other words, the reaction will stop once the limiting reactant is completely used up.
To determine the limiting reactant in this case, we need to calculate the number of moles of each reactant present. The equation shows that we need 2 moles of w and 3 moles of x to react with 3 moles of y and 1 mole of z.
If we have 5 units of w, we need to convert this to moles.

Assuming each unit represents 1 gram (for simplicity), we have 5 grams of w. The molar mass of w is not given, so we cannot directly calculate the number of moles. Similarly, if we have 6 units of x, we need to convert this to moles as well.
Once we have calculated the number of moles of each reactant, we can compare them to see which one is the limiting reactant. The reactant that produces the least amount of product is the limiting reactant.
To determine the limiting reactant in the given chemical equation, we need to calculate the number of moles of each reactant and compare them to see which one produces the least amount of product.

For more information on limiting reagent kindly visit to

https://brainly.com/question/14449503

#SPJ11

The pH of the solution is given by:

pH = -log[H+]

Rearranging this equation gives:

[H+] = 10^(-pH)

Substituting the given pH value of 2.50 gives:

[H+] = 10^(-2.50) = 3.16 x 10^(-3) M

Therefore, the molarity of the HCl solution is 3.16 x 10^(-3) M, which is option (C).

To know more about molarity, click here:-

https://brainly.com/question/8732513

#SPJ11

The best way to judge whether the amount of heat you apply to a reflux apparatus is sufficient but not too much is to monitor the temperature of the reaction mixture.

Temperature is a measure of the average kinetic energy of the particles in a substance or system. It is measured in degrees on a variety of scales, including Celsius, Fahrenheit, and Kelvin. Temperature affects the rate of chemical reactions, and can be used to measure the rate of energy transfer between objects. Temperature is an important factor in determining the properties of a system, such as its boiling point, melting point and vapor pressure. Temperature is also important for living organisms, as most organisms cannot survive in extreme temperatures.

The temperature should not exceed the boiling point of the solvent, since higher temperatures can lead to decomposition of the reactants. Additionally, the temperature should not be too low, as this could lead to slow reaction times. The ideal temperature should be between the boiling point and the freezing point of the solvent.

To learn more about temperature
https://brainly.com/question/4735135
#SPJ4

A student diluted a 0.614 M nitric acid solution by adding 41.1 mL of water to 26.3 mL of the solution. The resulting diluted solution has a concentration of 0.239 M.

To calculate the concentration of the diluted solution, we can use the formula:

C1V1 = C2V2

where C1 and V1 are the initial concentration and volume, and C2 and V2 are the final concentration and volume.

We have C1 = 0.614 M, V1 = 26.3 mL, and V2 = 26.3 mL + 41.1 mL = 67.4 mL.

Plugging in the values, we get:

0.614 M x 26.3 mL = C2 x 67.4 mL

Solving for C2, we get:

C2 = (0.614 M x 26.3 mL) / 67.4 mL

C2 = 0.239 M

Therefore, the concentration of the diluted nitric acid solution is 0.239 M.

To know more about the nitric acid solution refer here :

https://brainly.com/question/17088468#

#SPJ11

It is true that a reversible reaction involving chemicals in a variety of physical states can reach equilibrium, whether it is endothermic or exothermic.

At equilibrium, the rates of the forward and reverse reactions are equal, and the concentrations of reactants and products remain constant over time. The equilibrium constant (Kc) is a measure of the extent to which a reaction proceeds towards products or reactants at equilibrium, and it depends on the temperature and pressure conditions of the system.  It is true that a reversible reaction involving chemicals in a variety of physical states can reach equilibrium, whether it is endothermic or exothermic.Exothermic is a term used to describe a chemical reaction that releases heat energy to the surroundings. In an exothermic reaction, the products formed have less energy than the reactants, and the difference in energy is released as heat. This heat can be felt as an increase in temperature or as the emission of light or sound.Examples of exothermic reactions include combustion reactions, such as the burning of fuels like wood or gasoline, which release heat and light. Another example is the reaction between sodium hydroxide and hydrochloric acid, which releases heat and produces water and salt. Exothermic reactions are often used in applications such as energy production and heating.

To know more about exothermic visit :

https://brainly.com/question/31214950

#SPJ11

The diameters of the spring-type vapor relief for each case are:

a. 0.472 inches

b. 0.675 inches

c. 0.744 inches

d. 0.903 inches

e. 1.298 inches

f. 1.765 inches

To calculate the diameter of a spring-type vapor relief, we need to use the following equation:

[tex]d = 0.408 * (mass flow-rate / (Pressure drop * Molecular weight))^{0.5}[/tex]

where:

d = diameter of the relief valve (in inches)

Mass flow rate = mass flow rate of the fluid (in lb/hr or kg/s)

Pressure drop = over pressure (in psi or bar)

Molecular weight = molecular weight of the fluid

0.408 = A constant for units conversion

a. For 100 psig and 100°F:

Mass flow rate = 50 lb/hr

                        = 0.014 lb/s

Pressure drop = 100 psig - 10 psig

                        = 90 psig

                        = 6.205 bar

Molecular weight = 28

[tex]d = 0.408 * (0.014 / (90 * 28))^{0.5} \\ = 0.472 inches[/tex]

b. For 150 psig and 200°F:

Mass flow rate = 100 lb/hr = 0.028 lb/s

Pressure drop = 150 psig - 30 psig = 120 psig = 8.274 bar

Molecular weight = 44

[tex]d = 0.408 * (0.028 / (120 * 44))^{0.5} \\= 0.675 inches[/tex]

c. For 200 psig and 100°F:

Mass flow rate = 150 lb/hr = 0.042 lb/s

Pressure drop = 200 psig - 10 psig = 190 psig = 13.107 bar

Molecular weight = 28

[tex]d = 0.408 * (0.042 / (190 * 28))^{0.5} \\= 0.744 inches[/tex]

d. For 8 barg and 300 K:

Mass flow rate = 10 kg/s = 22.05 lb/s

Pressure drop = 8 barg - 1 barg = 7 barg

Molecular weight = 44

[tex]d = 0.408 * (22.05 / (7 * 44))^{0.5} \\= 0.903 inches[/tex]

e. For 10 barg and 400 K:

Mass flow rate = 20 kg/s = 44.1 lb/s

Pressure drop = 10 barg - 2 barg = 8 barg

Molecular weight = 28

[tex]d = 0.408 * (44.1 / (8 * 28))^{0.5}\\\\= 1.298 inches[/tex]

f. For 20 barg and 400 K:

Mass flow rate = 30 kg/s = 66.15 lb/s

Pressure drop = 20 barg - 1 barg = 19 barg

Molecular weight = 28

[tex]d = 0.408 * (66.15 / (19 * 28))^{0.5} \\= 1.765 inches[/tex]

Therefore, the diameters of the spring-type vapor relief for each case are:

a. 0.472 inches

b. 0.675 inches

c. 0.744 inches

d. 0.903 inches

e. 1.298 inches

f. 1.765 inches.

Learn more about Diameter of a spring-type at

brainly.com/question/29768921

#SPJ4

Carbon exists in three main different allotropes: graphite, diamond, and amorphous carbon, which, respectively, contain sp2, sp3, and mixed sp2/sp3 hybridized carbon atoms.

Describe the allotrope structure.

Allotropes are various structural configurations of the same element that can display a wide range of physical and chemical characteristics. The same forces that impact other structures, such as pressure, light, and temperature, can cause changes in allotropic forms.

Carbon exists in crystalline forms in fullerene, graphite, and diamond. These carbon crystalline formations feature sharp edges, planar surfaces, and a regular, distinct geometric shape.

Amorphous carbon, single-walled carbon nanotubes, Buckytubes, Buckminsterfullerene, Graphite, Lonsdaleite, C60 (Buckminsterfullerene), C540, C70, and Diamond are the eight allotropes of carbon.

To learn more about allotropes use:

https://brainly.com/question/13058829

#SPJ4

When molecules move down their concentration gradient, they move from where they are blank to where they are higher, lower.

Molecules are the smallest unit of a substance that still retains the chemical and physical properties of the original material. A molecule is made up of two or more atoms that are held together by chemical bonds. Molecules can be composed of any combination of elements, such as carbon, hydrogen, oxygen, nitrogen, and others. Molecules can be both simple, with just two atoms, or complex, with thousands of atoms forming a single molecule. Molecules can be found in everything from the air we breathe to the food we eat. Molecules are the building blocks of life, and understanding the structure and properties of molecules helps scientists gain insight into the natural world.

To learn more about molecules

brainly.com/question/26556885

#SPJ4

Grignard reactions involve the use of organometallic reagents known as Grignard reagents.

Protons are subatomic particles that exist in the nuclei of atoms. They have a positive electrical charge and a mass of approximately 1.67 x 10⁻²⁷ kg. Protons are the most common type of particle in the universe and are essential for the structure and stability of atoms.

A Grignard reagent is a special type of organometallic compound that consists of a carbon atom attached to an alkyl or aryl group via a single bond, and a magnesium atom attached to the carbon atom via a single, polar covalent bond. Typical Grignard reagents used in lab include ethylmagnesium bromide, methylmagnesium bromide, phenylmagnesium bromide, and benzylmagnesium chloride. These reagents are used in combination with an organic halide, such as an alkyl or aryl halide, to form an organometallic compound. The organic halide and Grignard reagent are reacted together in a solvent, such as ether, to form the Grignard reagent, which can then be used to form other organometallic compounds and to carry out various reactions.

To learn more about protons

https://brainly.com/question/1481324

#SPJ4

The ratio of hydronium ion concentrations in solution at the pH that results in the highest MP (Metalloprotein) activity to that which results in the lowest MP activity can be calculated using the equation for pH, which is -log[H+]. Since pH and [H+] are inversely proportional, a higher pH value indicates a lower [H+] concentration. Therefore, the ratio of hydronium ion concentrations would be the inverse of the ratio of pH values.

In simpler terms, if the pH resulting in the highest MP activity is 8 and the pH resulting in the lowest MP activity is 4, then the ratio of hydronium ion concentrations would be 10^-8/10^-4, which simplifies to 10^-4. This means that the hydronium ion concentration at the pH resulting in the lowest MP activity is 10,000 times higher than that at the pH resulting in the highest MP activity.

The reason for this is that metalloproteins are sensitive to changes in pH, as they rely on specific amino acids residues to bind to metal ions. A change in pH can disrupt these interactions and reduce MP activity. Therefore, maintaining a stable pH is crucial for optimal MP activity.

To know more about amino acids click this link

brainly.in/question/10752843

#SPJ11

In contrast, a positive redox potential corresponds to a negative ΔG, indicating that the reaction is spontaneous under standard conditions. Therefore, option (b) is correct.

According to the Nernst equation, the relationship between the redox potential and the Gibbs free energy change (ΔG) for a reaction involving oxidation and reduction half-reactions is given by:

ΔG = -nF E

where n is the number of electrons transferred in the reaction, F is the Faraday constant, and E is the redox potential.

From this equation, we can see that a negative redox potential (E) corresponds to a positive ΔG, meaning that the reaction is not spontaneous under standard conditions.

Option (a) is incorrect because a negative redox potential does not indicate a spontaneous reaction.

Option (c) is also incorrect because there is a direct relationship between redox potential and ΔG as given by the Nernst equation.

Option (d) is not entirely true because the redox potential of a half-reaction can be measured, but it is important to note that the redox potential of a full reaction is the sum of the potentials of the two half-reactions.

To know more about positive redox potential,

https://brainly.com/question/31751377

#SPJ11

The 2,4-DNP test shows the presence of aldehydes and ketones. A positive 2,4-DNP test appears as the formation of a yellow or orange precipitate, which indicates the presence of aldehydes and ketones. A negative 2,4-DNP test appears as no color change, which suggests the absence of aldehydes and ketones, and possibly the presence of primary and secondary alcohols, amines, or amino acids.

A positive 2,4-DNP test appears as an orange precipitate, indicating the presence of aldehydes and ketones. However, this test is not specific to aldehydes and ketones, as it can also react with other carbonyl-containing compounds such as amines and amino acids. A negative 2,4-DNP test appears as having no color change or precipitation, indicating the absence of aldehydes and ketones. This test is not applicable to primary and secondary alcohols, as they do not contain a carbonyl group that can react with the 2,4-DNP reagent.

Learn more about primary and secondary alcohols at https://brainly.com/question/1414275

#SPJ11

The functional groups that can be made when an alkene is reacted with O3 followed by DMS are aldehydes and/or ketones.

In this reaction, the alkene undergoes ozonolysis, which breaks the double bond and forms the corresponding carbonyl compounds.

The reaction of O3 with an alkene, also known as ozonolysis, breaks the double bond and creates two carbonyl groups. These carbonyl groups can then be reduced by DMS to form either aldehydes or ketones, depending on the substitution pattern of the alkene.

Therefore, the reaction is ozonolysis, which breaks the double bond of the alkene and forms carbonyl compounds.
When an alkene is reacted with O3 followed by DMS, the double bond breaks, leading to the formation of aldehydes and/or ketones as the main functional groups.

To learn more about alkene visit:

brainly.com/question/31033378

#SPJ11

It is sοluble at all temperatures ,The ionic compound is soluble in water because its dissolution in water reduces the system's pοtential energy, which encourages solubilization. Option D is correct.

Ionic compοunds are neutral cοmpounds that are composed of cations, οr positively charged ions, and anions, or negatively charged ions. When naming binary ionic compounds—ionic compounds with only two types of elements—the cation's name is written first, fοllowed by the anion's name.

Pοtential energy :stored energy that is affected by the relative positions of various system components is known as potential energy. When a spring is stretched or compressed, its potential energy increases.

When it rises abοve the ground, a steel ball has more potential energy than when it falls tο Earth.

Ep UM M # Config Select an answer and submit. Fοr keyboard navigation, use the up/down arrow keys tο select an answer.

а. It is insoluble at all temperatures

b. It is soluble at low temperatures but insoluble at high temperatures

с. It is soluble at high temperatures but insoluble at low temperatures

d . It is soluble at all temperatures

Learn mοre about ionic compound

brainly.com/question/2687188#SPJ4

Correct question is "The potential energy and number of configurations of the unmixed state () and mixed state () of sodium iodide in water. what is true about this ionic compound?"

A student analyzes the enthalpy change of reaction using a colorimeter. The temperature of the solution increases during the reaction. This is an exothermic reaction.

In an exothermic reaction, the products have lower energy than the reactants, so energy is released in the form of heat. The increase in temperature of the solution indicates that energy is being released into the surroundings, which means that this reaction is exothermic. Conversely, in an endothermic reaction, the products have higher energy than the reactants, so energy is absorbed from the surroundings, causing a decrease in temperature.

To learn more about, exothermic reaction, click here, https://brainly.com/question/28546817

#SPJ11

The experimentally determined value of Ka for HClO3 the correct option is a, 1.37 x 10^-4.

To determine the experimentally determined value of Ka for HClO3, we need to use the equation for the acid dissociation constant:

Ka = [H3O+][ClO3-]/[HClO3]

First, we need to calculate the concentration of H3O+ ions in the solution. The pH of the solution is 3.862, so we can use the following equation to calculate the concentration of H3O+ ions:

pH = -log[H3O+]

3.862 = -log[H3O+]

[H3O+] = 10^-3.862

[H3O+] = 5.22 x 10^-4 M

Next, we need to calculate the concentration of ClO3- ions in the solution. Since HClO3 is a strong acid, it completely dissociates in water to form H+ and ClO3- ions. Therefore, the concentration of ClO3- ions is equal to the concentration of HClO3:

[ClO3-] = [HClO3] = 0.583 M

Now, we can plug these values into the equation for Ka:

Ka = [H3O+][ClO3-]/[HClO3]

Ka = (5.22 x 10^-4 M)(0.583 M)/(0.583 M)

Ka = 5.22 x 10^-4

Ka = 5.22 x 10^-4 M

Therefore, the experimentally determined value of Ka for HClO3 is option a, 1.37 x 10^-4.

To know more about experimentally click here:

https://brainly.com/question/28810130

#SPJ11

The answer to question is that metal sulfides can be prepared by bubbling hydrogen sulfide gas through an aqueous solution containing the metal ion, and then adjusting the pH. The process involves saturating the solution with H2S, which occurs when the concentration of H2S reaches a certain level.

At this point, the H2S gas reacts with the metal ions in the solution to form metal sulfides, which are insoluble and can be filtered and collected.

An explanation for why this method works is that metal sulfides are generally insoluble in water, which means that they can be precipitated out of solution. By adding H2S gas, which is a reducing agent, to the solution, the metal ions are reduced to their sulfide form. This reaction is favored at low pH, which means that adjusting the pH of the solution can help to promote the formation of metal sulfides. Overall, this method is a relatively simple and efficient way to prepare metal sulfides, and can be used for a wide range of metals and applications.

To know more about metal sulfides refer to

https://brainly.com/question/24223923

#SPJ11

If demand is more inelastic than supply, consumers bear most of the tax burden.

If a tax is placed on a good in a market where supply is perfectly inelastic, there is no deadweight loss and the sellers bear the entire burden of the tax. The buyer will not bear none of the tax burden since demand curve is twice as elastic as supply. If a tax is imposed on a market with inelastic demand and elastic supply: buyers will bear most of the burden of the tax. If supply is perfectly elastic or demand is perfectly inelastic, consumers will bear the entire burden of a tax. Conversely, if demand is perfectly elastic or supply is perfectly inelastic, producers will bear the entire burden of a tax.

To learn more about tax check the link below-

https://brainly.com/question/28735352

#SPJ4

AlF3 has fluoride ions that are two-coordinate. The answer is true. This means that each fluoride ion in AlF3 is bonded to two aluminum atoms.

The structure of AlF3 is a trigonal planar shape with aluminum at the center and three fluoride ions arranged symmetrically around it. The aluminum atom has a +3 oxidation state and each fluoride ion has a -1 charge, making the compound neutral overall.

This compound has a high melting point due to the strong electrostatic attraction between the positively charged aluminum ions and the negatively charged fluoride ions. AlF3 is used in various industrial processes, including the production of aluminum, and ceramic glazes, and in the manufacture of some types of optical glass.

In summary, AlF3 has fluoride ions that are two-coordinate, with each fluoride ion bonded to two aluminum atoms.

To know more about aluminum atoms refer here:

https://brainly.com/question/18373845#

#SPJ11

The factor that determines the amount of gas that can dissolve in ocean water is the temperature and pressure of the water. As temperature and pressure increase, the solubility of gases in water decreases, and vice versa. Additionally, the type of gas and the salinity of the water can also affect the amount of gas that can dissolve in ocean water.

The factor that determines the amount of gas that can dissolve in ocean water is the solubility of the gas, which depends on temperature, pressure, and the chemical nature of the gas and water.

To summarize:
1. Temperature: Gas solubility typically decreases as water temperature increases.
2. Pressure: Gas solubility increases as the pressure of the gas above the water increases.
3. Chemical nature: Some gases, such as carbon dioxide, are more soluble in water than others, like oxygen or nitrogen, due to their chemical properties.

To know more about gas visit:

https://brainly.com/question/3637358

#SPJ11

Since all of its connections are made with its purest p orbitals, PH3 does not undergo hybridization. The bond energy data for this one, which shows that its bond angles are 90 degrees, serves as evidence.

Why is phosphorus present as P4 rather than p2?

Due to its huge size and low electronegativity, phosphorus atoms form single bonds rather than multiple bonds. As a result, the elemental form of phosphorus is the P4 molecule, just like that of other heavier metals.

Phosphorus is typically present in organophosphates in biological compounds. Phosphorus is connected to four oxygen atoms in organophosphates, with one of the oxygen atoms also being bonded to a carbon atom.

To learn more about hybridization use:

https://brainly.in/question/7238380

#SPJ4

The average global temperature has increased during the last 50 years. The correct answer is an option: 1.

The Earth's average surface temperature has been increasing over the past 50 years, and this trend is primarily due to human activities such as burning fossil fuels and deforestation, which release large amounts of greenhouse gases into the atmosphere. These gases trap heat from the sun, causing the Earth's atmosphere to warm up. This global warming has resulted in a range of environmental impacts, including rising sea levels, more frequent and intense heat waves, and extreme weather events, as well as changes in precipitation patterns and distribution. Correct answer: 1.

To know more about global temperature, here

brainly.com/question/9089155

#SPJ1

--The complete question is, The AVREAGE global temperature has ______ during the last 50 years.