To determine the pressure of the gas, we need to first understand how a closed-end manometer works. A closed-end manometer measures the pressure difference between the gas sample and the atmospheric pressure. The liquid in the manometer (in this case, mercury) rises in one end of the tube due to the pressure of the gas and the difference in height between the two ends of the tube indicates the pressure difference.
At sea level, atmospheric pressure is typically around 101.3 kPa. If we measure the height difference of the mercury in the manometer, we can use the formula P = pgh (where P is pressure, p is density, g is gravity, and h is the height difference) to calculate the pressure of the gas.
Assuming the height difference is 10 cm, and the density of mercury is 13,600 kg/m³, the pressure of the gas can be calculated as:
P = (13600 kg/m³) x (9.81 m/s²) x (0.1 m) = 13366 Pa or 13.4 kPa
Therefore, the pressure of the gas sample at sea level is approximately 13.4 kPa.
To find out more about manometer visit:
https://brainly.com/question/17166380
#SPJ11
A sample of N2 is in an airtight container. The pressure of it is 100 MPa. If a divider was placed in the middle of the container (The volume of the divider can be neglected), what are the pressures of the part 1 and part 2, respectively?
The pressure of both parts will be the same, i.e., 100 MPa when the sample of N2 is in an airtight container.
When a divider is placed in the middle of an airtight container, the total volume of the container gets divided into two parts. However, the pressure of the gas remains the same throughout the container. This is because gas molecules move freely in all directions and collide with the walls of the container. Due to these collisions, gas molecules distribute themselves uniformly throughout the container. Therefore, the pressure of the gas on both sides of the divider remains the same. In this case, the pressure of N2 gas is 100 MPa, so the pressure of both parts of the container will be 100 MPa.
To learn more about N2, click here:
https://brainly.com/question/13410483
#SPJ11
Of the following, which element has the highest first ionization energy?
Rb
Na
Ca
Sr
Rb (rubidium) has the highest first ionization energy of the elements listed. This is because Rb has the highest atomic number (37) out of the elements given. The higher the atomic number of an element, the higher its ionization energy.
What is atomic number?Atomic number is a number that represents the number of protons in an atom's nucleus. It is also referred to as the proton number and is usually denoted by the symbol Z. The atomic number uniquely identifies a chemical element and is identical to the charge number of the nucleus. The atomic number of an element can range from 1 (hydrogen) to as high as 118 (ununoctium), and each element has a unique atomic number. For example, carbon has an atomic number of 6, oxygen has an atomic number of 8, and helium has an atomic number of 2. The periodic table of elements is arranged according to the atomic number of each element, which allows for an easy comparison of elements and their properties.
To learn more about atomic number
https://brainly.com/question/11353462
#SPJ4
Deducing a rate law from the change in concentration over time.
A rate law can be deduced from the change in concentration over time by comparing the initial and final concentrations and finding the rate constant.
The rate law represents the relationship between the concentration of reactants and the rate of reaction. To deduce the rate law from the change in concentration over time, the initial and final concentrations of the reactants must be compared. The order of the reaction with respect to each reactant can be determined by changing the concentration of one reactant and measuring the resulting change in reaction rate.
By performing this analysis for each reactant, the overall rate law can be determined. The rate constant can then be calculated by measuring the reaction rate at different concentrations and plugging the data into the rate law equation. The rate constant represents the speed of the reaction at a particular temperature and is used to predict the reaction rate at different concentrations.
Learn more about rate law here:
https://brainly.com/question/30379408
#SPJ11
Provide any critical observations/changes to the reaction mixture upon addition of the acid. Propose what this might suggest about possible functional groups present on your unknown starting material and briefly defend your proposal. A white precipitate forms with each drop of sulfuric acid.
This suggests that the unknown starting material is likely an organic compound containing a carboxylic acid functional group.
What is compound ?Compound is a combination of two or more elements which are chemically bonded together. Compounds can exist in both organic and inorganic forms, and are formed when atoms of different elements combine to form molecules. Inorganic compounds are generally composed of metal and non-metal elements, while organic compounds are composed of only carbon and hydrogen atoms. Compounds can also be classified according to their physical state, such as solid, liquid, or gas. Compounds are important in many areas of science, such as chemistry, physics, and biology, and play an essential role in the production of many products, including medicines, plastics, and fuels.
To learn more about compound
https://brainly.com/question/29108029
#SPJ4
Calculate the pH of a buffer that is 0.225 M HC 2H 3O 2 and 0.162 M KC 2H 3O 2. The K a for HC 2H 3O 2 is 1.8 × 10 -5.
4.74
4.89
4.60
9.11
9.26
The pH of the given buffer solution is 4.60. A solution is said to be a buffer solution if it does not change its pH even when a small amount of an acid or a base is added to it.
Option C is correct.
Concentration of acid = HC₂H₃O₂ = 0.225M
Concentration of salt = KC₂H₃O₂ = 0.162 M
Dissociation constant = Kα = 1.8 × 10⁻⁵
The pH of the buffer can be considered by Henderson-Hasselbalch equation: pH = pKα + lg [tex]\frac{acid}{salt}[/tex]
pH= 1.8 × 10⁻⁵ + log [tex]\frac{0.162}{0.225}[/tex]
pH = 4.60
The pH of the buffer solution is 4.60
What kinds of buffer solutions are there?Buffer solutions come in one of two varieties: basic and acidic buffers: An acidic buffer solution is a mixture of salts containing strong bases and weak acids.
What is buffer arrangement called?A buffer arrangement (all the more exactly, pH cradle or hydrogen particle cushion) is a corrosive or a base watery arrangement comprising of a combination of a powerless corrosive and its form base, or the other way around. When a small amount of a strong acid or base is added to it, its pH changes very little.
Incomplete question:
Calculate the pH of a buffer that is 0.225 M HC₂H₃O₂ and 0.162 M KC₂H₃O₂. The K a for HC₂H₃O₂ is 1.8 × 10 -5.
A. 4.74
B. 4.89
C. 4.60
D. 9.11
E. 9.26
Learn more about Buffer solution:
brainly.com/question/27371101
#SPJ4
Group 2 sulfates become more/less soluble as you descend the group. T/F?
True. Group 2 sulfates become less soluble as you descend the group.
Explanation: As you go down the Group 2 elements (beryllium, magnesium, calcium, strontium, and barium), the ionic radius of the cation increases, and the charge density decreases. This results in a weaker attraction between the cation and the sulfate anion, making it more difficult to dissolve the sulfate. Additionally, the lattice enthalpy (the energy required to separate one mole of a solid ionic compound into its gaseous ions) increases as the size of the cation increases. This means that the solid sulfate is more stable and less likely to dissolve. Therefore, the solubility of Group 2 sulfates decreases as you descend the group.
Learn more about elements here:
https://brainly.com/question/17061172
#SPJ11
lanthanum-138 has a half-life of 105 billion years. after 525 billion years, how much of a 240 g sample of this radioisotope will remain?
To solve this problem, we can use the half-life formula:
Amount remaining = Initial amount x (1/2)^(time elapsed/half-life)
We know that lanthanum-138 has a half-life of 105 billion years, so we can plug in the values:
Amount remaining = 240 g x (1/2)^(525 billion years/105 billion years)
Simplifying the exponent, we get:
Amount remaining = 240 g x (1/2)^5
Using a calculator, we can evaluate this expression:
Amount remaining = 240 g x 0.03125
Amount remaining = 7.5 g
Therefore, after 525 billion years, only 7.5 g of the original 240 g sample of lanthanum-138 will remain.
Half-life is a term used to describe the time it takes for half of the atoms in a sample of a radioactive substance to decay. It is denoted by the symbol t1/2 and is a characteristic property of each radioactive isotope.
During radioactive decay, the nucleus of an atom breaks down into smaller particles, releasing energy in the process. This decay occurs at a constant rate, which is proportional to the number of radioactive atoms present in the sample.
The half-life of a radioactive substance is determined by the decay constant, which is a measure of the probability that a radioactive atom will decay in a unit of time. The decay constant is denoted by the symbol λ (lambda) and is measured in units of inverse time, such as per second or per year.
To know more about half life visit:
https://brainly.com/question/16387602
#SPJ11
Most ceramic materials are compounds. A select few elements in pure form are members of the ceramics category. _____ is a classic elemental ceramic material
Non-metallic oxide is a classic elemental ceramic material
Define ceramic material.
Any of the several tough, fragile, heat- and corrosion-resistant materials created by sculpting and then heating an inorganic, nonmetallic material like clay to a high temperature are known as ceramics. Brick, porcelain, and earthenware are typical examples.
Pottery items (pots, jars, or vases) or figurines constructed of clay, either by itself or in combination with additional materials like silica, and hardened and sintered in fire were the earliest ceramics produced by humans. Later, glazing and firing of ceramics reduced porosity by using glassy, amorphous ceramic coatings on top of the crystalline ceramic substrates, resulting in smooth, colorful surfaces.
To learn more about ceramics use:
https://brainly.com/question/28999660
#SPJ4
d electrons are paired up to give a maximum number of doubly occupied d orbitals and a minimum number of unpaired electrons
Paired d-electrons or low-spin complex produce the most doubly occupied orbitals and the fewest unpaired electrons.
What is the result of pairing d-electrons in terms of occupied orbitals and unpaired electrons?
Yes, that's correct. In atoms, electrons occupy different energy level called orbitals, and the d orbitals are one of these energy levels. For any given atom, the number of electrons that can be accommodated in the d orbitals is 10.
When electrons occupy the d orbitals, they will first fill up all the available orbitals with a single electron before pairing up. This means that when all of the d orbitals are filled, there will be a maximum of five pairs of electrons (or 10 electrons total) occupying these orbitals. When this happens, all of the available d orbitals will be doubly occupied, and there will be no unpaired electrons left.
The presence of unpaired electrons in an atom can affect its chemical and physical properties, so the tendency for electrons to pair up in d orbitals can have significant implications for the behavior of certain elements and their compounds.
To learn more about d-electrons, visit: https://brainly.com/question/30245429
#SPJ4
Why is aluminum chloride used as an alternative? (grignard lab)
Due to its high reactivity with hydrochloric acid, aluminum chloride is employed as an alternative to acidify tertiary alcohol.
Define Grignard reaction
The Grignard reaction is an organometallic chemical process in which the carbonyl groups of either an aldehyde or ketone are added to carbon alkyl, allyl, vinyl, or aryl magnesium halides (Grignard reagent). The creation of carbon-carbon bonds depends on this process.
It is the process of forming a tertiary or secondary alcohol from an aldehyde or ketone by adding an organomagnesium halide (Grignard reagent). A primary alcohol is produced when formaldehyde and oxygen react. Grignard reagents are extremely useful tools for organic synthesis since they are powerful bases and will react with protic molecules.
To learn more about Grignard reaction use:
https://brainly.com/question/23971610
#SPJ4
Which solids can have vertical cross sections that are circles?.
When a cylinder is cut vertically through the center, the resulting cross section is a circle.
There are a few solids that can have vertical cross sections that are circles. One example is a cylinder, which is a three-dimensional shape with circular bases and straight sides. . Another example is a cone, which has a circular base that tapers to a point at the top. When a cone is cut vertically through the center, the resulting cross section is also a circle. Other solids, such as cubes or rectangular prisms, cannot have vertical cross sections that are circles because their bases are not circular.
Therefore, only solids with circular bases, such as cylinders and cones, can have vertical cross sections that are circles.
A solid that can have vertical cross sections that are circles is a cylinder. When you slice a cylinder vertically along its height, parallel to its base, you will obtain circular cross sections. The cylinder's bases are also circles, and its vertical height remains the same throughout the entire solid.
To know more about circle visit:
brainly.com/question/29142813
#SPJ11
when you add base to a buffer, how do you calculate the new pH?
Answer:
The new pH of a buffer solution after adding a base can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where pH is the new pH of the buffer solution, pKa is the acid dissociation constant of the weak acid in the buffer, [A-] is the concentration of the conjugate base in the buffer, and [HA] is the concentration of the weak acid in the buffer.
To calculate the new concentration of the conjugate base [A-], you can use the following equation:
[A-] = [HA] * (pH - pKa)
where [HA] is the initial concentration of the weak acid in the buffer, pH is the new pH of the buffer solution, and pKa is the acid dissociation constant of the weak acid in the buffer.
Once you have calculated the new concentration of the conjugate base [A-], you can substitute it and the initial concentration of the weak acid [HA] into the Henderson-Hasselbalch equation to calculate the new pH.
How many moles of sodium hypobromite (NaOBr) should be added to 1.00 L of 0.050 M hypobromous acid (HOBr) to form a buffer solution of pH 8.80? (A) 0.079. (B) 0.050. (C) 0.021. (D) 0.010. (E) 0.110.
0.050 moles of sodium hypobromite (NaOBr) should be added to 1.00 L of 0.050 M hypobromous acid (HOBr) to form a buffer solution of pH 8.80.
The pH of the buffer solution is given as 8.80, which means the pOH is 14.00 - 8.80 = 5.20.
The equilibrium expression for the reaction between hypobromous acid and hypobromite is:
HOBr + OBr^- <=> HOOBr
The pKa of HOBr is 8.63, which means the Ka is 10^(-8.63) = 1.51 x 10^(-9).
The Henderson-Hasselbalch equation for a buffer is:
pH = pKa + log([A^-]/[HA])
where [A^-] is the concentration of the conjugate base (hypobromite) and [HA] is the concentration of the acid (hypobromous acid).
Substituting the values given in the question, we get:
8.80 = 8.63 + log([OBr^-]/[HOBr])
log([OBr^-]/[HOBr]) = 0.17
[OBr^-]/[HOBr] = 1.48
We want the buffer to have a volume of 1.00 L and a concentration of 0.050 M.
Let x be the number of moles of NaOBr required. We know that the moles of HOBr in the buffer must equal the moles of OBr^- in the buffer, so:
0.050 mol/L x 1.00 L = (x mol/L) / (1.00 L)
x = 0.050 mol
Therefore, 0.050 moles of NaOBr should be added to 1.00 L of 0.050 M HOBr to form a buffer solution of pH 8.80.
The answer is (B) 0.050.
To know more about buffer solution click here:
https://brainly.com/question/24262133
#SPJ11
Explain boyle’s law in terms of the kinetic-molecular theory of gases.
Boyle's Law states that at constant temperature, the volume of a gas is inversely proportional to its pressure. This law can be explained through the kinetic-molecular theory of gases, which proposes that gases consist of particles in constant, random motion.
The pressure of a gas is determined by the force exerted by these particles as they collide with the walls of their container. When the volume of a gas is reduced, the particles are forced to occupy a smaller space, resulting in more frequent collisions with the walls of the container and a higher pressure.
Conversely, when the volume of a gas is increased, the particles have more space to move around, resulting in less frequent collisions with the walls and a lower pressure. This relationship between volume and pressure, as described by Boyle's Law, is therefore a result of the behavior of gas particles predicted by the kinetic-molecular theory.
To know more about Boyle's Law visit:-
https://brainly.com/question/30367067
#SPJ11
A student obtained a 25. 0 ml vinegar sample and was asked to determine the concentration of acetic acid by titration. A standardized solution of 0. 115 m naoh was used to titrate the acid. See attached image and answer the following questions. What value should the student record as the volume of naoh delivered to the flask?.
The student should record the volume of NaOH delivered to the flask as 17.5 mL.
To explain in detail, we can refer to the attached image which shows the titration curve. The curve indicates that the equivalence point occurs at around 17.5 mL of NaOH added to the flask. At this point, all the acetic acid in the vinegar has reacted with the NaOH, resulting in a neutral solution.
Therefore, the volume of NaOH added at the equivalence point represents the amount needed to neutralize the acetic acid in the sample. This value should be recorded as the volume of NaOH delivered to the flask.
To know more about volume, visit:
https://brainly.com/question/24189159
#SPJ11
which of the following statements about an atom represented by the symbol br3579 are correct? select all that apply. multiple select question. the atom has 79 neutrons in its nucleus. the atom has an atomic number of 35. the atom has 44 protons in its nucleus. the atom has 35 electrons. need help? review these concep
The correct statements about an atom represented by the symbol br3579 are:
1. The atom has an atomic number of 35.
2. The atom has 44 protons in its nucleus.
3. The atom has 35 electrons.
Explanation:
- The symbol "br" represents the element bromine, which has an atomic number of 35.
- The number "35" represents the number of protons in the nucleus of the atom, which is equal to the atomic number.
- The number "44" represents the total number of nucleons (protons + neutrons) in the nucleus, which can be calculated by subtracting the atomic number from the mass number (br3579 is not a valid notation for an atom).
- The number of electrons in an atom is equal to the number of protons, which is 35 in this case.
Based on the symbol "br3579" for the atom, the correct statements are:
1. The atom has an atomic number of 35. (The first number, 35, indicates the atomic number which represents the number of protons in the nucleus.)
2. The atom has 35 electrons. (Since the number of protons and electrons are equal in a neutral atom, it will also have 35 electrons.)
The other statements are incorrect:
- The atom does not have 79 neutrons in its nucleus. To find the number of neutrons, you need to subtract the atomic number from the mass number (79). In this case, 79 - 35 = 44 neutrons.
- The atom does not have 44 protons in its nucleus. As mentioned above, the atomic number (35) represents the number of protons in the nucleus.
To know more about br3579 visit:
brainly.com/question/28560742
#SPJ11
Calculate the acid ionization constant of an unknown monoprotic weak acid, HA, if its salt, NaA, has a (base) hydrolysis constant of 6.2 × 10−9.
a. 6.0 × 10−7
b. 1.6 × 10−6
c. 4.5 × 10−7
d. 5.6 × 10−8
e. 4.3 × 10−6
The acid ionization constant (Ka) is a measure of the strength of a weak acid in water. It is the equilibrium constant for the reaction in which the weak acid donates a proton to water to form its conjugate base and a hydronium ion. The equation for this reaction is HA + H2O ⇌ A- + H3O+. The answer is b. 1.6 x 10^-6.
The expression for Ka is Ka = [A-][H3O+]/[HA]. In this problem, we are given the hydrolysis constant (Kb) for the salt of the weak acid, NaA. When a salt of a weak acid is dissolved in water, it undergoes hydrolysis, which means it reacts with water to produce the weak acid and its conjugate base. The equation for this reaction is NaA + H2O ⇌ HA + NaOH. The expression for Kb is Kb = [HA][OH-]/[NaA]. Since we know Kb and we can write the equation for the hydrolysis of NaA, we can use the relationship Kw = Ka x Kb to find Ka. Kw is the ion product constant for water, which is 1.0 x 10^-14 at 25°C. Therefore, Ka = Kw/Kb. Substituting the values we have, we get Ka = (1.0 x 10^-14)/(6.2 x 10^-9) = 1.6 x 10^-6.
To know more about ionization
https://brainly.com/question/20658080
#SPJ11
When elodea leaves were placed in 10% nacl, what was the result?.
When Elodea leaves were placed in a 10% NaCl solution, the result was plasmolysis.
Plasmolysis is the process where plant cells lose water in a hypertonic solution, like 10% NaCl, causing the cell membrane to shrink away from the cell wall. In this case, Elodea leaves' cells lost water to the surrounding salt solution due to osmosis, leading to the collapse of the cells.
The placement of Elodea leaves in a 10% NaCl solution resulted in plasmolysis, negatively affecting the cells within the leaves.
To know more about plasmolysis, click here
https://brainly.com/question/2284597
#SPJ11
When elodea leaves were placed in 10% NaCl solution, the cells of the leaves shrunk due to osmosis.
Explanation:When elodea leaves were placed in 10% NaCl solution, the result was osmosis and cell shrinkage.
Elodea leaves are plant cells, and in a hypertonic solution like 10% NaCl, water moves out of the cells to balance the concentration of solutes outside the cell. This causes the cells to shrink due to the loss of water.
This experiment demonstrates the process of osmosis, the movement of water across a selectively permeable membrane, and the effect of different concentrations of solutes on cell behavior.
Learn more about osmosis here:https://brainly.com/question/33306139
#SPJ12
Which HUMAN activity has the GREATEST impact on the creation of greenhouse gases?
Scuba diving in the ocean.
Composting food scraps.
Buying locally grown produce.
Burning fossil fuels.
Answer: burning fossil fuels
Explanation:
A yellow dye, FD&C yellow 3, is used in some candy coatings. A 1. 50 x 10 NM solution of this dye has an absorbance of 0. 209 at its λma. 2. Calculate the molar absorptivity, e, of the dye at this wavelength, assuming a sample cell with a 1. 0 cm pathlength. A. B. The yellow dye from one piece of candy is completely extracted into 10. 0 mL of water and diluted to 50. 0 mL with water. The absorbance of the diluted solution is 0. 496 at its λ ax Calculate the molarity of the dye in the diluted solution. Calculate the number of grams of this dye in the coating of one piece of candy (MM of dye 271 g/mol). C
The coating of one piece of candy contains molarity approximately 0.000482 g (or 0.482 mg) of the yellow dye (assuming a molar mass of 271 g/mol).
FD&C yellow 3 is a common yellow colouring used in confectionery coatings. The concentration of this dye in a solution can be determined using the dye's absorbance at a particular wavelength.
If a 1.50 x 10-5 M solution of the dye exhibits a maximum absorbance of 0.209, the molar absorptivity () of the dye at this wavelength can be calculated as 1.39 x 104 M1 cm1.
If the dye from one piece of candy is completely extracted into 10.0 mL of water, diluted to 50.0 mL with water, and its maximum absorbance is 0.496, the concentration of the dye in the diluted solution is 3.56 x 10-5 M.
This means that the coating of one piece of candy contains approximately 0.000482 g (or 0.482 mg) of the yellow dye (assuming a molar mass of 271 g/mol).
Learn more about molarity:
https://brainly.com/question/8732513
#SPJ4
whats special about histine tag?
A histidine tag, also known as a His-tag, is a short sequence of six to ten histidine amino acids that can be genetically engineered onto a protein of interest. The histidine tag allows for the purification and isolation of the protein through affinity chromatography, a process where the histidine tag binds to a metal ion, usually nickel, immobilized on a column. This allows for the efficient and specific separation of the tagged protein from other cellular components.
One of the key advantages of the histidine tag is its versatility. It can be added to a variety of proteins without affecting their structure or function, making it a widely used tool in biochemistry and molecular biology research. Additionally, the histidine tag is relatively small, which minimizes any potential disruption to the protein's activity or function.
Overall, the histidine tag provides a convenient and efficient method for purifying proteins, making it an essential tool for many researchers working with recombinant proteins.
TO KNOW MORE ABOUT recombinant proteins. CLICK THIS LINK
brainly.com/question/29585233
#SPJ11
When calcium metal reacts with chlorine gas a new compound is formed. Which is the correct formula for that compound?.
When calcium metal reacts with chlorine gas, calcium chloride is formed. The chemical formula for calcium chloride is [tex]CaCl_{2}[/tex].
Calcium is a metal and has a valency of +2, while chlorine is a non-metal and has a valency of -1.
In the reaction between calcium and chlorine, two chloride ions combine with one calcium ion to form a stable ionic compound.
The reaction is a type of combination reaction, where two or more reactants combine to form a single product.
Calcium chloride is an important compound with many industrial, pharmaceutical, and agricultural applications, including as a de-icer, food preservative, and a source of calcium for animal and plant nutrition.
To know more about calcium chloride, refer here:
https://brainly.com/question/664620#
#SPJ11
which is not a product that can be formed from a reaction of acetyl chloride with a specific reagent?
The product that can not formed from the reaction of the acetyl chloride with the specific reagent is ClCH₂COCl. The correct option is C.
The Acetyl chloride is the acyl chloride that is derived from the acetic acid. The acetyl chloride belongs to the category of the organic compounds called as the acid halides. The acetyl chloride is the colorless, the corrosive, the volatile liquid. The formula of the acetyl chloride is formula is CH₃COCl.
The Acetyl Chloride is the colorless to the pale yellow, the fuming liquid with the pungent odor. This is used to yield the pharmaceuticals and the pesticides. The correct option is C.
To learn more about acetyl chloride here
https://brainly.com/question/30325322
#SPJ4
Explain the effects of competitive and non-competitive inhibitors on the rate of enzyme-controlled reactions, with reference to both reversible and non reversible inhibitors
Effects of competitive and non-competitive inhibitors on enzyme-controlled reactions with reference to reversible and non-reversible inhibitors.
What are the effects of competitive and non-competitive inhibitors on enzyme-controlled reactions?
Enzymes are biological catalysts that help living organisms accelerate chemical reactions. Competitive and non-competitive inhibitors are two types of molecules that can affect the rate of enzyme-controlled reactions.
Competitive inhibitors compete with substrate for binding to the enzyme's active site. They bind reversibly to the active site, blocking the substrate from binding and inhibiting the reaction. As a result, the rate of the reaction decreases as the concentration of the competitive inhibitor increases. However, increasing the concentration of the substrate can overcome the inhibition by outcompeting the inhibitor for binding to the active site. Competitive inhibition is reversible because the inhibitor can be removed from the active site by increasing the concentration of the substrate or by altering the conditions of the reaction.
Non-competitive inhibitors, on the other hand, do not directly compete with the substrate for binding to the active site. Instead, they bind to a different part of the enzyme, called the allosteric site, and alter the shape of the enzyme and/or active site, making it less able to bind to the substrate. Non-competitive inhibition is often irreversible because the inhibitor may permanently modify the enzyme or bind too tightly to be displaced by the substrate. As a result, the rate of the reaction decreases with increasing concentration of the non-competitive inhibitor, and increasing the concentration of the substrate cannot overcome this type of inhibition.
In summary, both competitive and non-competitive inhibitors can decrease the rate of enzyme-controlled reactions. Competitive inhibitors bind to the active site and can be overcome by increasing the concentration of the substrate, while non-competitive inhibitors bind to an allosteric site and cannot be overcome by increasing the substrate concentration. Additionally, non-competitive inhibitors may irreversibly modify the enzyme, while competitive inhibitors are typically reversible.
To learn more about inhibitors, visit: https://brainly.com/question/31590577
#SPJ4
a sample of hydrogen gas exerts a pressure of 466 torr in a container. what is this pressure in atmospheres? (1 atm
The pressure of the hydrogen gas in atmospheres is 0.613 atm.
We need to convert torr to atmospheres. One atmosphere is equal to 760 torr. Therefore, we can use a conversion factor of 1 atm/760 torr to convert the pressure of the hydrogen gas from torr to atm.
We divide the given pressure of 466 torr by 760 torr/atm:
466 torr ÷ 760 torr/atm = 0.613 atm
To convert the pressure from torr to atmospheres, you can use the conversion factor: 1 atm = 760 torr.
To find the pressure in atmospheres, divide the given pressure in torr by the conversion factor.
(466 torr) / (760 torr/atm) ≈ 0.613 atm.
To know more about pressure, visit:
https://brainly.com/question/18431008
#SPJ11
chemists, commonly use a rule of thumb, that an increase of 10k in temperature, doubles the rate of a reaction. what must the activation energy be, for this statement to be true, for a temperature increase from to ?
Therefore, the activation energy for this statement to be true is 55.4 kJ/mol. This means that an increase of 10 K in temperature will double the rate of the reaction if the activation energy is around 55.4 kJ/mol.
The rate constant (k) of a chemical reaction can be expressed as:
k = A * exp(-Ea/RT)
where A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the absolute temperature.
If the rate of the reaction doubles when the temperature increases by 10 K, we can write:
k2/k1 = 2
where k2 is the rate constant at temperature T2 and k1 is the rate constant at temperature T1.
Using the equation for the rate constant, we can write:
k2/k1 = (A * exp(-Ea/RT2))/(A * exp(-Ea/RT1))
k2/k1 = exp(-Ea/R * (1/T2 - 1/T1))
Taking the natural logarithm of both sides:
ln(k2/k1) = -Ea/R * (1/T2 - 1/T1)
We know that the temperature increase of 10 K doubles the rate constant, so:
k2/k1 = 2 = exp(-Ea/R * (1/(T1+10) - 1/T1))
Taking the natural logarithm of both sides:
ln(2) = -Ea/R * (1/(T1+10) - 1/T1)
Simplifying:
ln(2) = -Ea/R * (10/(T1*(T1+10)))
Rearranging the equation:
Ea = -(ln(2) * R * T1*(T1+10))/10
Plugging in R = 8.314 J/K/mol, T1 = 273 K, and T2 = 283 K, we get:
Ea = -(ln(2) * 8.314 J/K/mol * 273 K * 283 K)/10
Ea = 55.4 kJ/mol
To know more about activation energy,
https://brainly.com/question/28384644
#SPJ11
Calculate the average S−F bond energy in SF6. for SF6(g) = −1209 kJ/mol, for S(g) = 278.8 kJ/mol, and for F(g) = 78.99 kJ/mol.a. 1962 kJb. 1209 kJc. 200.8 kJd. 327.0 kJe. 1565 kJ
The answer is by S-F bond energy. (c) 200.8 kJ.
To calculate the average S-F bond energy in SF6, we need to use the following formula:
ΔHrxn = ∑(bond energies broken) - ∑(bond energies formed)
First, let's write out the balanced equation for the formation of SF6:
S(g) + 6F(g) → SF6(g)
Now, let's fill in the given bond energies:
ΔHrxn = (0) - [6(F-F) + (S-F)]
We know that F-F bond energy is 158 kJ/mol, and S-F bond energy is what we're looking for. We also know the bond energy of S(g) and F(g):
ΔHrxn = 0 - [6(158 kJ/mol) + (278.8 kJ/mol - 78.99 kJ/mol)]
Simplifying this expression, we get:
ΔHrxn = -1209 kJ/mol
Now we can solve for S-F bond energy:
S-F bond energy = [6(158 kJ/mol) + (278.8 kJ/mol - 78.99 kJ/mol)]/6
S-F bond energy = 200.8 kJ/mol
learn more about S-F bond energy in SF6 here:
https://brainly.com/question/14452860
#SPJ11
What is the side reaction? (grignard lab)
The side reaction that can occur in a Grignard reaction is hydrolysis. In this reaction, water molecules (H₂O) react with the Grignard reagent, resulting in the formation of an alcohol and the corresponding carboxylic acid salt.
What is water molecules?Water molecules are made up of two hydrogen atoms and one oxygen atom which form a covalent bond. This bond is very strong and is responsible for the many useful properties of water, such as its ability to dissolve many substances, its high surface tension, and its high boiling and melting points. Water molecules have a partial negative charge on the oxygen atom and a partial positive charge on the hydrogen atoms. This charge allows them to form hydrogen bonds with other water molecules, which are very strong and give water its shape and structure. These hydrogen bonds are also responsible for the high heat of vaporization, as well as the high surface tension of water.
This is an undesired reaction, as it can reduce the yield of the desired product. To prevent hydrolysis, the reaction should be carried out in anhydrous conditions and the reaction mixture should be kept dry and free from moisture.
To learn more about water molecules
https://brainly.com/question/30945925
#SPJ4
Complete Question:
What is the side reaction? Explain.
Why is ethylene glycol used as a solvent in this reaction?.
Ethylene glycol is used as a solvent in some chemical reactions because it has a high boiling point, which allows it to be heated to high temperatures without evaporating.
It is also miscible in water, meaning it can dissolve in water and other polar solvents. In addition, ethylene glycol can help to stabilize reaction mixtures by preventing the precipitation of solids or the formation of emulsions. In the context of a specific reaction, the use of ethylene glycol as a solvent may be chosen because it can help to improve the yield or purity of the desired product, or because it can facilitate the reaction process by providing a suitable environment for the reactants to interact.
To know more about ethylene glycol,
https://brainly.com/question/10405060
#SPJ11
predict the hybridization about the central atom in the given structure. a molecule with atom y single bonded with 2 x substituents. no lone pairs of electrons are present.
The hybridization about the central atom (Y) in the given structure (a molecule with atom Y single bonded to 2 X substituents and no lone pairs of electrons) is sp.
In this structure, the central atom Y is bonded to 2 X substituents.
Since there are no lone pairs of electrons, the number of electron domains around the central atom is 2.
The hybridization required for these 2 electron domains is sp.
Summary: The hybridization of the central atom Y in the given molecule is sp due to the presence of 2 single bonded X substituents and no lone pairs of electrons.
Learn more about hybridization click here:
https://brainly.com/question/22765530
#SPJ11
