The pressure on a 30 mL sample of an ideal gas increases from 400 K to 1600 K at a
constant pressure. The new volume is?

Answers

Answer 1

A 30 mL sample of an ideal gas experiences a continuous pressure increase as the temperature rises from 400 K to 1600 K. The new volume exists 0.015 L.

What is meant by Boyle's Law?

Boyle's Law is a gas law that establishes a relationship between pressure and volume of a specific quantity of gas at a fixed temperature.

According to the statement, "The volume occupied by a given gas mass at constant temperature is inversely proportional to the pressure," the volume falls and grows as the pressure changes.

Boyle's law is expressed mathematically as:

Pressure × Volume = constant

or PV = k

If a change in pressure or volume occurs at a constant temperature, the following is true:

P1 × V1 = P2 × V2

The pressure and volume in state 1 are P1 and V1, while the pressure and volume in state 2 are P2 and V2.

In other words, the final pressure divided by the final volume is equal to the product of the starting pressure and the original volume.

P1 = 101.3 kPa = 101,300 Pa (being 1 kPa = 1,000 Pa)

V1 = 30 mL = 0.03 L (1 L = 1,000 mL)

P2 = 202.6 kPa = 202,600 Pa

101,300 Pa × 0.03 L=202,600 Pa × V2

simplifying the above equation we get

[tex]$& V 2=\frac{101,300 P a * 0.03 \mathrm{~L}}{202,600 P a} \\[/tex]

V 2 = 0.015 L

The new volume is 0.015 L.

The complete question is:

The pressure on 30 milliliter of an ideal gas increases from 101.3 kPa to 202.6 kPa at constant temperature. What is the new volume?

To learn more about Boyle's Law refer to:

https://brainly.com/question/1696010

#SPJ1


Related Questions

what is the weathering of rocks by chemicals called____

Answers

Weathering of rocks by chemicals called  the breaking down or dissolving of rocks and minerals on Earths surface.

What is meant by rocks?

Any naturally occurring solid mass or combination of minerals or mineraloid materials is referred to as rock (or stone) in geology.It is divided into groups based on the minerals it contains, its chemical make-up, and how it is produced.Except for the liquid outer core and pockets of magma in the asthenosphere, the Earth's crust and the majority of its interior are made of rocks. Petrology and mineralogy are just two of the many geology subdisciplines that are involved in the study of rocks.It might only cover rocks found on Earth, or it might also cover planetary geology, which examines materials from other celestial bodies.

To learn more about rocks refer to

https://brainly.com/question/26046551

#SPJ4

Substance A is a liquid at room temperature and pressure, while substance B is a gas under the same conditions. Both are molecular substances. Based on this observation, we can say that the intermolecular attractions in substance A are __________ those in substance B.

A. Stronger than
B. The same strength as
C. Weaker than

Answers

Substance A is  liquid at room temperature and pressure, while substance B is  gas under the same conditions.Based on this observation, we can say that intermolecular attractions in substance A are stronger than those in substance B.

What are intermolecular attractions?

Intermolecular attractions  is a force by which atoms in a molecule  combine. it is basically an attractive force in nature.  It can act between an ion  and an atom as well.It varies for different  states  of matter that is solids, liquids and gases.

The forces of attraction are maximum in solids as  the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.

Learn more about intermolecular attractions,here:

https://brainly.com/question/10626096

#SPJ1

heisenberg uncertainty principle definition chemistry

Answers

Heisenberg's uncertainty principle states that the speed and position both cannot be known with perfect accuracy, the more we know about the position, the less we know about speed.

There are certain circumstances that explain that both the position and speed can be found out at the same time like in vehicles, but the uncertainty principle incorporates the uncertainties that are too small as compared to an ordinary object. And this principle is based on the wave duality of matter. It has a mathematical form of Δ x. ΔV≥[tex]\frac{h}{4 pi m}[/tex]

where V is representing velocity, x is representing position, h is the Planck constant and m is the mass of the object.

Learn more about speed here:

https://brainly.com/question/28224010

#SPJ4

Find the molecular formula for a compound made up of 76.6 % carbon, 6.4 %
hydrogen, and 17.0% oxygen by mass that has a molar mass of 94.12 g/mol.

Answers

A chemical with a mass composition of 76.6% carbon, 6.4 hydrogen, and 17.0% oxygen with a molar mass of 94.12 g/mol has the molecular formula C6H6O.

What is the empirical formula for a substance that contains 94% oxygen and 6% hydrogen?

A substance with a mass percentage of 94% oxygen and 6% hydrogen has the empirical formula OH. It might seem that oxygen and hydrogen should be present in greater proportions in the empirical formula, but keep in mind that the percentages are based on the mass of the elements.

What is the empirical equation for 7.7% hydrogen and 92.3% carbon?

In a hydrocarbon, carbon makes up 92.3% of the mass and hydrogen makes up 7.7%. The compound's empirical formula will be revealed. HCHC5, HCHC3.

To know more about hydrogen visit:-

https://brainly.com/question/28937951

#SPJ1

which process is used to separate soluble compounds from insoluble compounds?
Decantation
Filtration Sublimation
Extraction

Answers

Decantation is a technique for separating immiscible liquids or soluble compounds from insoluble compounds in mixtures.

What is Decantation?Decanting is another chemical laboratory process for separating mixtures. In its most basic form, it simply means allowing a solid-liquid mixture or two immiscible liquids to settle and separate by gravity.The process of removing liquid from a container without disturbing the sediment is known as decantation. Following that, the solids are mixed together and water is added. The soluble solid dissolves, while the insoluble solid settles to the flask's bottom. Using a glass rod, the soluble solid is gently poured out, leaving the insoluble solid behind.Decantation has the disadvantage of not completely separating the mixture, and Filtration is frequently used to separate soluble compounds from insoluble compounds.

To learn more about decantation refer to :

https://brainly.com/question/8472739

#SPJ4

For each of the formulas, classify the formula as either an empirical formula, a molecular formula, or both. Nahco3 c2h6.

Answers

Sodium bicaronate's empirical and molecular formulas are both NaHCO3. The empirical formula for C2 H6 is CH3.

What does "structural formula" mean?

Chemical bonds connecting the atoms of a molecule are located in structural formulae. A structural formula is made up of symbols for the atoms joined by brief lines that stand in for chemical bonds. Single, double, and triple bonds are denoted by one, two, or three lines, respectively.

If we look at the molecular formula for NaHCO3, we can see that it has a molar ratio of 1:1:1:3 and that everything in this molar ratio results in a total mass of: 23g + 1g + 12g + 48g = 84g. Knowing that the molecular formula shows the total molar ratio of each element in a compound, while the empirical formula shows the simplest ratio of the elements present in a compound.

To determine the empirical formula of C2 H6 , you divide the molecular formula by a number that gives the smallest ratio of atoms. So, we divide C2 H6 by 2 to determine the empirical formula CH3. Structural formula in picture given.

To learn more about structural formula use link belwo:

https://brainly.com/question/514499

#SPJ4

Answer:

Both and then Molecular

Explanation:

A sealed container can hold
6.28 L CO2 at 1.00 atm and 293 K.
How many moles of CO2 fill the
container?

Answers

Answer:

0.26

Explanation:

PV=nRT

n= PV/RT

n = (1*6.28)/(0.082*293)

n=0.26 moles

The groundwater in a certain area i being pumped out to provide drinking water. What mut happen for the water table to remain unchanged

Answers

For the water table to remain unchanged in an area where groundwater is being pumped out, the rate at which water is being pumped out must be equal to the rate at which water is being replenished through natural processes such as precipitation and surface water infiltration.

Key points:

Groundwater is water that is found underground in the spaces between rocks and soil.It can be pumped out using wells to provide drinking water, irrigation, and other uses.The water table is the level of underground water that can be found in an area.When the water is pumped out, the water table drops.To keep the water table unchanged, the rate of water pumped out must be equal to the rate of water replenishment by natural process.This is known as "sustainable yield".If the rate of pumping exceeds the rate of replenishment, the water table will drop over time.Conversely, if the rate of pumping is less than the rate of replenishment, the water table will rise.

Learn more about the water table here:

https://brainly.com/question/6284267

#SPJ4

How many Particles of silver will be formed from 17.54 g copper, when Copper (II) reacts with Silver Nitrate?
Equation: Cu + 2AgNO3 → Cu(NO3)2 + 2Ag

Answers

59.60grams particles of silver will be formed from 17.54 g copper, when Copper (II) reacts with Silver Nitrate. The equation is  Cu(s) + 2AgNO₃(aq) → Cu(NO₃)₂ (aq) + 2Ag(s).  

What is molar mass ?

The term molar mass is defined as the mass in grams of one mole of the compound.

The equation is as follows:

Cu(s) + 2AgNO₃(aq) → Cu(NO₃)₂ (aq) + 2Ag(s).  

1mol of Cu will produce 2 mol Ag.

The molar mass of Cu = 63.5g/mol

The molar mass of Ag = 107.9g/mol

63.5g Cu will produce 2 × 107.9 = 215.8g of Ag

17.54g Cu will produce 17.54g Cu / 63.5gCu × 215.8g Ag

= 0.276 × 215.8

= 59.60grams of Ag produced.

Thus, 59.60grams particles of silver will be formed from 17.54 g copper, when Copper (II) reacts with Silver Nitrate.

To learn more about the molar mass, follow the link;

https://brainly.com/question/12127540

#SPJ1

scientists have made a breakthrough in their mission to reverse aging

Answers

The given statement "scientists have reached a main milestone in learning how to reverse aging" is true because scientists have investigated that lifestyle interventions, such as proper and healthy diet, exercise and supplements can reverse aging.

Scientific studies reveal that lifestyle interventions, including diet, exercise, and supplements can reverse aging. For instance, in one of the studies, patients were put on a healthy diet, had to take particular supplements, and exercise. After 8 weeks of following this plan, their epigenetic age was reversed by almost two years.

Thus, the given statement correctly specifies that scientists have achieved a big milesotme to reduce or reverse aging.

"

Complete question

scientists have reached a key milestone in learning how to reverse aging

True

False

"

You can learn more about Scientific studies at

https://brainly.com/question/28145780

#SPJ4

how can a small contained fire be extinguished most easily?
A. Use a fire extinguisher B. Use water C. Call the instructor D. Smother the fire with a small container

Answers

To extinguish or put off a small contained (non-spreading) fire, an efficient and easy way is to smother the contained fire with another container or equipment so that no oxygen can further react with the fire.

Safety methods and safety precautions are very crucial and important while performing an experiment or while doing some research work in a laboratory or in general whenever working with hazardous inflammable substances.

During any fire hazard, safety measures differ in forms and procedures relative to the intensity and spread of the fire.

While any major fire breakout, the initial/primary action should be getting yourself to safety first while pushing the fire alarm (if available) or informing the fire extinguishing team. To put off a huge fire by manual work yourself or smothering it, won't generally work in the situation.

For any minor fire hazard, as for a small contained fire, for an instance if a fire breaks out in a beaker, then the easiest way would be to smother the contained fire so as no more oxygen gas from the air can enter into the container. Gradually the oxygen (or any other fuel) present in the container would wear out or finish as it gets used and no more combustible substance would be present to help the fire to expand.

Therefore, using extinguisher, or water, or calling the instructor are not the better ways to extinguish a small contained fire.

Hence, Option D among the options is the correct answer to the question.

Learn more about oxygen here:

https://brainly.com/question/13905823

#SPJ4

Compared with solid ionic compounds, solid molecular compounds generally...A) have lower melting pointsB) are more brittleC) are harderD) conduct electricity as liquids

Answers

A) have lower melting points. Solid molecular compounds often have lower melting points than solid ionic ones. Chemical substances known as molecular compounds assume the shape of distinct molecules.

Molecular compounds are made up of separate molecules that are connected by sharing electrons (covalent bonding). Examples include water, which has molecules of H2O, methane, which has molecules of CH4, and hydrogen fluoride, which has molecules of HF. Ionic bonding will often be present in compounds when a metal is bound to either a non-metal or a semi-metal. Molecular compounds are those that include just non-metals or semi-metals combined with non-metals and exhibit covalent bonding. Nonmetals are used to create molecular (or covalent) compounds. Compound molecules are created when certain quantities of atoms from several elements combine. Water, ammonia, and carbon dioxide are among examples. Metals and nonmetals are used to create ionic compounds.

learn more about Molecular compounds here:

https://brainly.com/question/23088724

#SPJ4

chemical test for oxygen gas

Answers

Explanation:

You're required to put a glowing splinter of wood(red hot charcoal) into a test tube of unknown gas and if the wood starts burning again or rekindles. That gas is said to be oxygen. Although another gas that does that is dinitrogen(I)oxide but to differ them from each other, dinitrogen(I) oxide has a pleasant smell while oxygen is odourless.

bonds between two atoms that are equally electronegative are___

Answers

Bonds between atoms having the same value of electronegativity in the bond, is called as the non-polar covalent bond.

A covalent bond is a chemical bond between two atoms in which pairs of electrons are shared between both the two atoms. The covalent bond is also called a molecular bond. The forces of attraction or repulsion acting between two atoms, when they both share electron pair or bonding pair, is called as Covalent Bonding. If the atoms have the same electronegativity, they will share their valence electrons equally with each other. This type of a covalent bond where electrons are shared equally between the two bonded atoms is called a non-polar covalent bond.

Covalent bonding also includes many kinds or types of interactions, including σ-bonding (sigma bonding), π-bonding ( pi bonding), metal-to-metal bonding, bent bonds, agostic bonding, three-center two-electron bonds and three-center four-electron bonds.

On the other hand, a polar covalent bond is formed between two non-metal atoms that have different electronegativities. Thus the electrons consisting the bond are unevenly shared between th atoms of a polar covalent bond.

Learn more about electronegativity here:

https://brainly.com/question/17762711

#SPJ4

which types of reactions are essentially opposites of one another?

Answers

Synthesis reaction and Decomposition reaction are two essentially opposite reactions to one another.

The reaction that occurs when two different atoms or molecules interact to form a different molecule or compound is known as the synthesis reaction.

For example, the formation of Sodium Chloride ([tex]NaCl[/tex]) from Sodium ([tex]Na[/tex]) and Chlorine([tex]Cl_2[/tex]). The reaction can be given by the chemical equation:

[tex]2Na+Cl_2 \rightarrow2NaCl[/tex]

The reaction that occurs when one reactant breaks down into two or more products is known as the decomposition reaction.

For example, the decomposition of Calcium Carbonate([tex]CaCO_3[/tex]) by heat into Calcium Oxide ([tex]CaO[/tex]) and Carbon Di-Oxide([tex]CO_2[/tex]). The reaction can be given by the chemical equation:

[tex]CaCO_3\rightarrow CaO+CO_2[/tex]

Hence, Synthesis reaction and Decomposition reaction are two essentially opposite reactions to one another.

Learn more about synthesis and decomposition reaction here:https://brainly.com/question/11735551

#SPJ4

What gas is not used during fermentation ?

Answers

Fermentation does not require oxygen as it is an anaerobic process. If oxygen is present, pyruvate will be completely oxidized to water and carbon dioxide molecules by some yeast species spiration. On the other hand, yeast species will produce ethanol only in an anaerobic environment by a process called Pasteur Effect.

What is fermentation

Fermentation  is a process of energy production in cells with a state anaerobic (without oxygen) that produces changes in organic biochemistry through the action of enzymes. Fermentation is a form of anaerobic respiration in general, but there is a more precise definition that defines fermentation as respiration in an anaerobic environment without the presence of an external electron acceptor. Examples of fermentation can be found in bread making, wine (beer) and cheese making.

Sugar is a common ingredient in fermentation. Some examples of fermented products are ethanol, lactic acid and hydrogen. However, several other components can also be produced from fermentation, such as butyric acid and acetone. Yeast is a common fermenting agent used to produce ethanol in beer, wine, and other alcoholic beverages. Anaerobic respiration (without external electron acceptor) in mammalian muscles during hard work can be classified as a form of fermentation which produces lactic acid as a by-product. This accumulation of lactic acid can cause muscle fatigue.

Learn more about fermentation at https://brainly.com/question/13050729.

#SPJ4

what should you do if all of the solvent evaporates while you are cooling your recrystallization beaker?

Answers

If this occurs, just redissolve the solute with more solvent because the chemical that crystallized out of solution owing to evaporation is unlikely to be pure. the solvent evaporates recrystallization .

while you are cooling your recrystallization.  Recrystallization is a physical process for purifying compounds depending on their solubility. The procedure is finished by heating the material to dissolve the chemical with impurities in a solvent combination. Recrystallization is a method used in chemistry to purify compounds. When a compound and impurities combination is dissolved in a suitable solvent, either the desired compound or the impurities can be extracted from the solution, leaving the other behind. It gets its name from the crystals that form when the chemical precipitates. Recrystallization can also refer to the natural formation of bigger ice crystals at the cost of smaller ones.

learn more about recrystallization  here:

https://brainly.com/question/29215760

#SPJ4

The loss of part or all of a forest, _____, is a major threat to biodiversity.

1)Deforestation
2)Damming
3)Drainage
4)Poaching

Answers

Answer: #1 deforestation

Explanation:

Deforestation (1) is the correct answer

the substances initially involved in a chemical reaction

Answers

The substances initially involved in a chemical reaction are called reactants.

They are the substances that are present at the start of the reaction and are transformed into different substances, known as products, during the reaction. The reactants are written on the left side of a chemical equation and the products are written on the right side.

In a chemical reaction,

Reactants are the starting materials that are transformed into different substances called products. These substances participate in the chemical reaction by forming new chemical bonds, breaking existing bonds, or both. The reactants are listed on the left side of a chemical equation, while the products are listed on the right side.

Example:

In the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O), the reactants are H2 and O2, and the product is H2O. This reaction can be represented by the equation: H2 + O2 -> H2O

In this equation, the reactants H2 and O2 are listed on the left side of the arrow and the product H2O is listed on the right side.

It is important to note that the number of atoms of each element on the reactants side and products side must be equal. This principle is called the law of conservation of mass.

Learn more about chemical reactions here:

https://brainly.com/question/29470602

#SPJ4

CAN ANYONE HELP ME
NAME 5 POLYMERS

Answers

Answer:

1. Polyethylene (PE)
2. Polypropylene (PP)
3. Polyvinyl chloride (PVC)
4. Polystyrene (PS)
5. Polytetrafluoroethylene (PTFE), also known as Teflon.

what is the correct reading for the graduated cylinder in the close-up? make sure to report your reading with the appropriate significant figures.
Select one :
41 mL
39.5 mL
40.05 mL
40.5 mL
40.50 mL

Answers

Answer: The correct volumetric reading for the above measuring tube is 40.5 ml.

What are Significant Figures in Measurement?

Measured size numbers are not exact, as opposed to defined sizes or directly counted sizes. To measure the volume of liquid in a graduated cylinder, we need to read the bottom of the meniscus, the lowest point on the curved surface of the liquid.

We know there are three significant digits in graduated tube measurement . Two digits are reliable and one digit is uncertain.

Here in the above measurements the the reliable volume measurement is 40 ml and the uncertain digit is 5.

Hence, the correct answer is 40.5 ml.

To learn more about reading for the graduated cylinder, click on the given link: https://brainly.com/question/29152088

#SPJ4

how many grams of gold are produced if 123.7g of potassium react with gold chloride

Answers

If 123.7 g of potassium reacts with gold chloride, the amount of gold produced would be 208.79 grams.

Stoichiometric problem

Potassium metal reacts with gold chloride to produce potassium chloride and gold metal according to the following chemical reaction:

[tex]3K + AuCl_3 -- > 3KCl + Au[/tex]

Recall that: mole = mass/molar mass

123.7 g of potassium would be equivalent to: 123.7/39 = 3.17 mol

From the equation of the reaction, the mole ratio of potassium to gold is 3:1. Thus, the mole equivalent of the produced gold would be:

3.17/3 = 1.06 mol

Mass = mole x molar mass

1.06 mol of gold would be equivalent to: 1.06 x 196.97 = 208.79 grams

In other words, the amount of gold produced from the reaction of 123.7 g of potassium with gold chloride would be 208.79 grams.

More on stoichiometric calculations can be found here: https://brainly.com/question/29841194

#SPJ1

which water should you use for the water bath during the recrystallization?

Answers

Answer:

Tap Water. Yes, Tap water

On each chair structure identify the relationship of the substituents as cis or trans? a. I = trans; Il trans b. I=cis; Il = cis c. I = trans; Il = cis d. I=cis; Il trans e. not possible to tell while in a chair structure

Answers

The chair structure I has the trans confirmation and the chair structure II has the cis confirmation.

A particular structure can have two isomers, namely, the cis and the trans isomers. The confirmation is said to be cis confirmation when both the substituents are facing in same axial or equatorial plane. The confirmation is said to be trans when both the substituents are facing in the opposite planes.

In the structure I, we can see that both the groups are facing in the opposite planes and hence the structure must have a trans confirmation. In structure two, the groups are in the same plane and hence the confirmation is a cis confirmation.

Hence, the correct option is  c. I = trans; II = cis.

To know more about isomers here

https://brainly.com/question/16289453

#SPJ4

The structures of four isomers of an aldotetrose are given below. Which of the structures are Diastereomers of A? Enantiomers of C? Stereoisomers of D?

Answers

A is a diastereomer of C and B, and C and B are enantiomers of A. B is a stereoisomer of D. Diastereomers are molecules having the same chemical structure and bonding arrangement.

Components, but they can't be combined. In every other way, enantiomers are identical chemically. When two enantiomers are dissolved molecules in a solution, we can distinguish between them based on which way polarized light rotates. Stereochemistry is the study of how molecules with the same chemical formula and atom-bonding order (constitution) can differ in terms of the three-dimensional spatial orientations of their atoms. This phenomenon is known as stereoisomerism, also referred to as spatial isomerism.

Learn more about molecules here

https://brainly.com/question/15444131

#SPJ4

Which of the following elements is most likely to form a covalent bond with oxygen? Ca Na Mg H

Answers

The elements is most likely to form a covalent bond with the oxygen is hydrogen, H.

The covalent bond is bond formed between the atoms by the sharing of the valence electrons. Covalent bond is formed by the mutual sharing of the electrons. The covalent bond formed between the atoms of the same element. The covalent bond formed between the atoms of the different elements.

The covalent bond is formed between the oxygen and the hydrogen by the sharing of the electrons. The example of the covalent bond between the hydrogen and oxygen is H₂O. The two hydrogen atoms and one oxygen atoms combine and form the covalent bond.

To learn more about covalent bond here

https://brainly.com/question/10777799

#SPJ4

Is NaCl a nonpolar covalent bond?.

Answers

No, NaCl is not a nonpolar covalent bond. NaCl, also known as table salt, is an ionic compound, not a covalent compound.

Ionic compounds are formed when a metal and a nonmetal combine, and the bond between them is an ionic bond. In the case of NaCl, the sodium atom donates an electron to the chlorine atom, creating a positive ion (Na+) and a negative ion (Cl-), which are held together by the electrostatic attraction between the ions.

Covalent compounds, on the other hand, are formed when nonmetal atoms share electrons in order to fill their valence shells. Covalent bonds can be polar or nonpolar. A polar covalent bond occurs when the electrons are not shared equally between the atoms. In contrast, a nonpolar covalent bond occurs when the electrons are shared equally between the atoms, creating a symmetrical distribution of electron density.

In summary, NaCl is an ionic compound formed by the combination of a metal (Na) and a nonmetal (Cl) by an ionic bond, not a covalent bond, and it is not a polar or nonpolar covalent bond.

Learn more about covalent bond:

https://brainly.com/question/9833711

#SPJ4

Billy, the toolbox, took out a bag of sugar when he heard that the fern was in need of glucose. But the chloroplast said there was no need. Why?
From Mosa mack

Answers

The chloroplast was not in need of glucose as itself manufactures and stores glucose during the process of photosynthesis.

What is photosynthesis?

It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy  through the process of cellular respiration.

Some of the energy which is converted  is stored in molecules of carbohydrates like sugar and starches  which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis  are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.

Learn more about photosynthesis,here:

https://brainly.com/question/29764662

#SPJ1

Which types of posted signs convey information about chemical storage? (Select all that apply)
Hazard signs such as "Flammable," "Oxidizer," and "Corrosive"
Exit sign
Gas Cylinder sign
National Fire Protection Association (NFPA) diamond
Safety equipment signs such as "Safety Shower" and "Eyewash Station"

Answers

Hazard signs such as "Flammable," "Oxidizer," and "Corrosive" National Fire Protection Association (NFPA) diamond Gas Cylinder sign posted signs convey information about chemical storage.

Pictograms are pictorial symbols that are used to express particular information about a chemical's risks. OSHA mandates pictograms on principal labels to indicate chemical dangers. The exact OSHA danger categorization determines each pictogram(s). There are several forms of risks in the workplace, including chemical, ergonomic, physical, and psychological hazards, to mention a few. Dangerous situations. Employees who operate with machinery or on construction sites are more likely to be exposed to safety concerns.  Biological dangers. Biological dangers are exceedingly hazardous  Physical dangers Ergonomic risks Chemical risks Workload risks.

learn more about Pictograms here:

brainly.com/question/29898314

#SPJ4

How many significant figures does the number 48.050 have?

Answers

Answer: 5 -There are 5 significant figures in 48.050. Count the number of significant figures. Non-zero digits, zeros found between two significant digits, and zeros following a significant digit in a decimal are significant.

Explanation:

Other Questions
which of the following would result in higher price elasticity of good x? group of answer choices more substitutes for good x a shorter period of time has passed since the change in the price of good x lower costs of labor in the production of good x good x is more of a necessity than a luxury Which one of the following states a requirement or characteristic of special use valuation under IRC Section 2032A?A)Special use valuation can benefit an estate by allowing it to deduct up to $675,000 from the gross estate.B)An estate cannot use special use valuation unless it has business real estate.C)The benefit that can be gained by using special use valuation is limited to $1,000,000.D)The decedent must have materially participated in a farm or closely held business for at least eight years preceding death. Write a program that defines the following two lists:names = ['Alice', 'Bob', 'Cathy', 'Dan', 'Ed', 'Frank','Gary', 'Helen', 'Irene', 'Jack','Kelly', 'Larry']ages = [20, 21, 18, 18, 19, 20, 20, 19, 19, 19, 22, 19]These lists match up, so Alices age is 20, Bobs age is 21, and so on. Write a programthat asks the user to input the number of the person to retrieve the correspondingdata from the lists. For example, if the user inputs 1, this means the first personwhose data is stored in index 0 of these lists. Then, your program should combinethe chosen persons data from these two lists into a dictionary. Then, print thecreated dictionary.Hint: Recall that the function input can retrieve a keyboard input from a user. Thesignature of this function is as follows:userInputValue = input("Your message to the user")N.B.: userInputValue is of type String third root of 27x ^ 9 Use the number line to find the missing value. (-6)+_=-3 before any court can hear any dispute between miriam and the trucking company, it must have jurisdiction over the person or company against whom the suit is brought against or over the property involved in that lawsuit. in order for miriam to sue the trucking firm, she has to file the lawsuit in a court that has in personam jurisdiction over the defendant . the firm's headquarters are in georgia, although the company does business in florida, so georgia and florida have in personam jurisdiction over the trucking firm. miriam can sue the trucking firm in both georgia and florida state courts. Act 2, Scene 1:1. What is Gonzalo's advice to Alonso at the beginning of the scene? How doyou think Alonso will respond? What do we already know about Gonzalo?2. Act 2, Scene 1, Lines 10-197 become clearer when we realize that Sebastianand Antonio are standing apart, commenting to each other on what theother characters say. How does this device affect the scene? How would thescene be different if Antonio's and Sebastian's side comments wereeliminated?3. Who is "Widow Dido"?4. Why isn't Alonso impressed with or entertained by what his followers aresaying? What do we know that he doesn't know? (Dramatic irony!)?5. What sort of commonwealth would Gozalo create on the island?Help please How do you write radicals in simplest form?. Place an X in front of the ONE phrase that best replaces the question mark in this cause and effect diagram: refer to exhibit 19-3. when price decreases from $3.50 to $2.50, the price elasticity of supply is group of answer choices 0. 1.0. 5.0. 0.1. 0.5. Other debt should be included such as car loans, student loans and credit cards when considering BOTH the 20% and the 10% in the 20-10 rule. 10. A company sold a total of $1440 in gift bears for Valentine's Day. If the gift bears cost $15 apiece, how many gift bears did it sell? A. 15 B. 96 C. 144 D. 1440 Which is a correct expansion of (4x + 1)(2x - 2)?A. 4x 2x + 4xB. 4x 2x2 + 4xC. 4x 2x + 4x(-2) +1.2x+1 (-2)(-2) +1.4x+1 (-2)(1) + 1.2x +1 (-2) Is 36 rational or irrational?. Asexually reproducing organisms produce offspring that are genetically identical to each other and to the parents. What type of cell division are the offspring a product of? Please describe the factors that are facing Belgium in the modern era, what are the contributing factorsassociated with this national crisis? (Provide at least two examples in depth) A crash test car of mass 1,000 kg moving at constant speed of 12 m/s collides completely inelastically with an object of mass M at time t = 0. The object was initially at rest. The speed v in m/s of the car-object system after the collision is given as a function of time t in seconds by the expression v=s/1+5la. Calculate the mass M of the object. b. Assuming an initial position of x = 0, determine an expression for the position of the car- object system after the collision as a function of time t. c. Determine an expression for the resisting force on the car-object system after the collision as a function of time t. d. Determine the impulse delivered to the car-object system from t = 0 tot = 2.0 s. What should you do if a fire starts in a beaker? question 18 options: O pour water on the fire. O wait and see if the fire goes out on its own. O cover the fire with a rag. O cover the mouth of the beaker with a watch glass. a. La moneda de Chile se llama ______________.b. En Per se usa el ______________.c. La moneda de Guatemala es ______________.d. La moneda de Espaa se llama ______________.e. En Paraguay se usa ______________.f. La moneda de Puerto Rico es ______________.g. La moneda de Costa Rica se llama ______________. ddram in 150 words introduction