The properties and interactions of magnets are called?

As a result, there is almost no friction in space to slow moving objects. A ship in space, unlike a ship on the water, does not require constant thrust to keep moving forward. After the engines are turned off, the momentum of a space ship will continue to propel it forward indefinitely at a constant speed.

Momentum is defined as a body's amount of motion. It is measured by "mass velocity," since velocity and the direction of the body's motion impact momentum. Momentum is a vector quantity since velocity is a vector and mass is a scalar variable. Momentum is defined as the product of mass and velocity. Momentum is a body's "power" while it moves, indicating how much force it can exert on another. A bowling ball (large mass) traveling slowly (low velocity), for example, can have the same momentum as a baseball (small mass) thrown quickly (high velocity).

Here,

As a result, almost no friction exists in space to slow moving objects. Unlike a ship on the water, a ship in space does not require constant thrust to keep moving forward. After the engines are turned off, a space ship's momentum will continue to propel it forward at a constant speed indefinitely.

To know more about momentum,

https://brainly.com/question/20290738

#SPJ4

The force applied must have been 1100 Newtons.

To calculate the force applied, we can use the equation for work done by a lever:

Work done = effort force x effort arm x cos(theta)

where theta is the angle between the effort arm and the load arm. Since the angle is not given, we can assume it to be 90 degrees.

We know that the work done is 400 joules, the effort arm is 10 meters, and the load arm is 2 meters.

We can substitute these values into the equation:

400 = F_effort x 10 x cos(90)

The cosine of 90 is zero.

So

F_effort = 400/0 = undefined

To find the force applied, we can use the principle of the mechanical advantage of the lever.

MA = load arm/effort arm = 2/10 = 1/5

F_effort = F_load / MA = 220 N / (1/5) = 1100 N

So the force applied must have been 1100 Newtons.

For more questions like Lever click the link below:

https://brainly.com/question/16106840

#SPJ4

The word done will be 120 joules if we lift an object with a force of 20 N off the ground.

Work is the application of force to a task. It is directly correlated with both the amount of force applied to the object and its motion. The equation below can be used to calculate work: Work is equal to force times distance. The Newton meter is the SI unit of work (N m).

W = Fd is the formula for the amount of work W that a constant force does on an object. It is determined by multiplying the force's intensity by the distance the object moves in the force's direction.

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ1

The magnitude doesn't equal to direction. The magnitude of the vector is its length, while the direction indicates which way the vector points.

The answer to "how much?" is magnitude, and the answer to "which way?" is direction. 5 meters is a magnitude, and North is a direction. The vector quantity 5 meters north has both magnitude and direction. Some quantities in physics (known as vector quantities) are affected by their orientation, but others are not (called scalar quantities).

For example, if a friend is throwing a party and you need directions, knowing 5 miles isn't enough; you also need to know which direction to travel. If, on the other hand, you're bringing juice to the party and she tells you to bring 10 bottles, that's all the information you need; the amount of juice doesn't need to be specified.

Learn more about magnitude here: https://brainly.com/question/24468862

#SPJ4

The angular acceleration of the turning wheel that has a displacement of 7.23 rad is 0.27 rad/s².

The term "angular acceleration" refers to the rate at which the angular velocity of an item changes over time in rotational motion. It is a way to gauge how quickly an object's rotational motion is accelerating or decelerating. Similar to linear acceleration, which depicts variations in linear velocity, is angular acceleration.

Given:

Angular speed, ω  = -2 rad/s

Time, t = 8.25 s

Angular displacement, θ = 7.25 rad

The angular acceleration is given by:

θ = ω + ¹/₂αt²

7.25 = -2 + ¹/₂ (α) (8.25)²

7.25 = -2  +  34.03α

34.03α = 9.25

α = 9.25 / 34.03

α = 0.27 rad/s²

Hence, the angular acceleration of the turning wheel that has a displacement of 7.23 rad is 0.27 rad/s².

To learn more about Angular acceleration, here:

https://brainly.com/question/17123770

#SPJ12

Claire likely has a combination of potential energy, which is stored energy, and kinetic energy, which is energy in motion.

The energy a body has as a result of its motion is known as kinetic energy. It is the energy required to move an object from one place to another. It is the energy of motion and is often referred to as being “in motion”. Kinetic energy is proportional to the mass of an object and the square of its velocity. Kinetic energy is often used in physics to describe the energy of objects moving in a given direction.

Her potential energy is due to the fact that she is standing at the edge of the pool, while her kinetic energy is due to the fact that she is ready to run into the diving board.

To learn more about kinetic energy
https://brainly.com/question/25959744
#SPJ4

The new distance between the two objects should be r/3 units to have the attractional force of 135 N

The gravitational force, which is what pushes mass-containing objects toward one another. We frequently consider the pull of gravity from the Earth. Your body is kept on the ground by this force. However, all mass-bearing objects are pulled toward one another by gravity.

The gravitational pull between two masses Ocean tides rise and fall due to the moon's gravitational pull. of or pertaining to a strong inclination or movement in the direction of something or someone: There has been a lot of research on why they gravitate toward harmful conduct.

Gravity is a basic interaction that causes all objects with mass or energy to attract one another.

Let the masses be M and m kg

The distance is given as'r'

So when the distance is 'r'

GMm/r² = 15

Now when the distance is modified to z

GMm/z² = 135

The ratio of the two

(GMm/z²)/(GMm/r²) = 135/15

⇒r²/z² = 9

⇒z = r/3

The new distance between the two objects should be r/3 units to have the attractional force of 135 N

To learn more about Gravitational Force refer to :

https://brainly.com/question/14931141

#SPJ1

Two gametes will be produced by meiosis II, which will have unequal number of chromosomes.

A nondisjunction event during meiosis II results in the production of two aneuploid gametes. Nondisjunction is a type of error that occurs during meiosis, the process by which cells divide to produce sperm and egg cells. During meiosis, chromosomes first replicate and then line up in pairs along the center of the cell. Then, the pairs of chromosomes are pulled apart, one to each of the two new cells, ensuring that each cell gets one copy of each chromosome. Nondisjunction occurs when chromosomes fail to separate properly, resulting in one daughter cell receiving an extra copy of a chromosome, while the other daughter cell is missing a copy. In the case of meiosis II, this means that the two gametes produced will have an unequal number of chromosomes. One gamete will have an extra copy of a particular chromosome, while the other gamete will be missing a copy of that chromosome. These gametes are called aneuploid because they have an abnormal number of chromosomes.

Aneuploidy can have serious consequences, as the extra or missing chromosomes can disrupt the normal genetic makeup of the organism. Aneuploidy in sperm or egg cells can lead to the formation of genetically unbalanced zygotes when fertilization occurs, which can result in various genetic disorders and developmental abnormalities. For example, Down syndrome, a common chromosomal disorder, is caused by an extra copy of chromosome 21. Similarly, Turner syndrome is caused by the absence of one X chromosome in females, resulting in a total of 45 chromosomes.

In summary, a nondisjunction event in meiosis II results in the production of two aneuploid gametes, each with an abnormal number of chromosomes, which can lead to various genetic disorders and developmental abnormalities.

Learn more about meiosis II here:

https://brainly.com/question/10621150

#SPJ4

Missy diwater, the former platform diver for the ringling brother's circus, had a kinetic energy of 12 000 j just prior to hitting the bucket of water. If Missy's mass is 40 kg, then her speed is: 24.49 m/sec

The energy of motion, or kinetic energy, may be seen in the movement of an item or subatomic particle. Kinetic energy can be discovered in every moving object and particle. Kinetic energy is generated when anything moving, such as a person walking, a baseball rising through the air, a piece of food dropping from a table, or a charged particle in an electric field. The object's squared velocity determines the kinetic energy. As a result, an object's kinetic energy quadruples when its velocity doubles. Kinetic energy is divided into five kinds radiative, thermal, sound, electrically, and mechanic.

Given that,

kinetic energy = 12000 J

m = mass = 40 kg

v = velocity m/s

Kinetic energy of an object can be expressed in terms of its mass m and velocity v as:

K.E = 1/2 × m × v²

or, 12000 = 1/2 × 40 × v²

or, v² = 600

or, v = √600
or, v = 24.49 m/sec

To know more about Kinetic energy refer to:

https://brainly.com/question/8101588

#SPJ4

When the magnetic dipole is at a right angle to the applied magnetic field, or when theta = 90, the torque is maximum. When the torque is zero, or when = 0, the minimum torque is anticipated.

The torque is smallest when the magnetic dipole is oriented parallel to the direction of the applied magnetic field. Torque is a velocimetric quantity. The direction of the torque vector is determined by the force acting on the axis. Everyone who has ever opened a door has an  understanding of torque. To open a door, one pushes on the side that is farthest. Torque is a quantity that can be thought of as the cross product of force and distance. The Newton metre, is the torque unit in the SI system (m2*kg*s^2).

Learn more about torque here

https://brainly.com/question/6855614

#SPJ4

if they are within 8 horizontal feet of a grounded item or surface, a grounding conductor for equipment.

To learn more about horizontal refer to:

https://brainly.com/question/25705666

#SPJ4

Answer: Exothermic

Explanation:

An exothermic reaction causes an increase in temperature. This is because the energy released when the bonds are broken among the reactants is greater than than the energy absorbed when new bonds are formed among the products. This leftover energy gets passed along to the surroundings, where it produces a measurable increase in heat.

Explanation:

m1u1+m2u2=m1v1+m2v2

(3000×15)+(2200×-10)=(3000×v)+(2200×v)

45000-22000=5200v

23000=5200v

v=230/52

v=4.423m/s to the east.

A form of energy conversion that captures heat energy from within Earth is Geothermal Energy.

Geothermal energy is heat energy from the earth—Geo (earth) + thermal (heat). Geothermal resources are reservoirs of hot water that exist or are human made at varying temperatures and depths below the Earth's surface. Geothermal energy is the thermal energy in the Earth's crust which originates from the formation of the planet and from radioactive decay of materials in currently uncertain but possibly roughly equal proportions. Geothermal energy is a type of renewable energy taken from the Earth's core. It comes from heat generated during the original formation of the planet and the radioactive decay of materials. This thermal energy is stored in rocks and fluids in the centre of the earth.

Learn more about Geothermal Energy

brainly.com/question/1061324

#SPJ4

After the completion of meiosis nondisjunction, 2 of the four daughter cells will have a normal complement of 23 chromosomes and the other two daughter cells will be aneuploid, one with n+1 and other with n-1 chromosomes.

The cell cycle has two main parts which is-

The Interphase and mitosis/meiosis. Interphase is further subdivided into three other phases.

Nondisjunction can occur during either mitosis or meiosis, but the effects of meiosis are more widely studied because they have a direct impact on the offspring. Meiosis, also known as reductional division, is the process by which chromosome numbers are reduced and haploid gametes are produced. Gametes are sex cells that merge during sexual reproduction to produce new, unique offspring — eggs in females and sperm in males. Nondisjunction creates gametes with abnormal chromosome numbers, which result in offspring with ploidy numbers after fertilization.

Learn more about Meiosis here:

https://brainly.com/question/29383386

#SPJ4

The acceleration dawn a ramp is not negative because when an object dawn from a ramp is in the same direction with gravity which is make the object get faster or has positive acceleration.

In law of motion, Constant acceleration define as an even more specific type of accelerated moving object. An object which moves with constant acceleration has a speed which changes for the same amount every second. For a finite time, constant acceleration are determine by deviation between initial velocity and  the velocity during the end of the counted time. It is formulated as: a = V - Vo * t where Vo is initial velocity, t is counted time, and V is the counted velocity in the end of counted time.

Learn more about law of motion here

https://brainly.com/question/2009830

#SPJ4

Both the balls hit the ground at the same time because their initial velocity( = 0) & acceleration towards the ground is same(g = 9.8m/s²)

The measurement of change in an object's velocity is known as acceleration. When you press the gas pedal in a car, it surges forward at an increasing rate. Acceleration is the change in velocity.

The formula for calculating acceleration is as follows:

Acceleration = (Velocity Change)/ (change in time)

The standard unit of acceleration measurement is metres per second squared (m/s2). This is calculated using the above formula, where velocity is measured in metres per second and time is measured in seconds.

In physics, acceleration has both a magnitude (the m/s2 number we discussed earlier) and a direction. As a result, acceleration is now a vector.

Learn more about acceleration

https://brainly.com/question/12550364

#SPJ4

Complete question:

A physics demo launches a ball horizontally while dropping a second ball vertically at exactly the same time. [Delayed Feedback] 1) Which ball hits the ground first?

The process of escaping molecules from the surface of a liquid at any temperature is known as Evaporation.

When a liquid turns into a gas, this is referred to as evaporation. In these examples, the liquid water is evaporating into a gas known as water vapour rather than disappearing.

On a global scale, evaporation occurs. Evaporation, along with condensation and precipitation, is one of the three major steps in the Earth's water cycle. Evaporation accounts for 90% of the moisture in the Earth's atmosphere, with plant transpiration accounting for the remaining 10%.

Matter exists in three states that is solid, liquid and gaseous state. Evaporation is just one way for a substance, such as water, to transition between these states.

Learn more about states of matter here:

https://brainly.com/question/29069107

#SPJ4

(a) The coefficient of static friction between the tires and the road is 0.84.

(b) You don't need the mass to find the coefficient of static friction because the coefficient of static friction depends on speed of the car, radius of the road and acceleration due to gravity.

The coefficient of static friction between the tires and the road is calculated as follows;

static friction force = centripetal force

μmg = mv²/r

μg = v²/r

μ = ( v² ) / ( gr )

where;

The coefficient of static friction between the tires and the road is calculated as;

μ = (26.5 ² ) / ( 9.8 x 85 )

μ = 0.84

Learn more about coefficient of static friction here: https://brainly.com/question/25050131

#SPJ1

The measured value of g is determined by the slope of the  time period T² vs. l graph (acceleration due to gravity).

Time period the amount of time that a behavior lasts or a condition persists. Depending on the type of activity or situation under consideration, it may be measured in seconds or in millions of years.

the duration T as determined by the formula T = 2π √(l/g). The pendulum's length, l, is indicated here.

The result of squaring both sides is  T² = 4π² l/g

42 and g are constants, thus

⇒ T² = ml

The slope of the T² vs l graph in this case is m. The slope's value is m =  4π²/g

We can determine the value of g from the slope of the graph by substituting π = 10 in the equation above.

g = 40/m

To learn more about Time period from given link

https://brainly.com/question/28570026

#SPJ1

The terms "main sequence, spectrum, and light year" are discussed here.

Any star with a hot, dense core that burns hydrogen into helium to produce energy is said to be in the main sequence. The majority of stars in the galaxy are main-sequence stars, including the Sun, Tau Ceti, and Alpha Centauri A.

The temperature, chemical make-up, and inherent luminosity of a star are all revealed in the spectrum. A series of photos taken at different wavelengths of the slit in the star's light make up spectrograms obtained with a slit spectrograph.

The distance light travels in a year is measured in light-years.

Learn more about light-years here:

https://brainly.com/question/1302132

#SPJ1

The energy can be lost in the of heat energy, kinetic energy and potential energy. If lenore pushes a box up the plane and into her truck.

First of all "energy lost" is an inappropriate word used here. Energy can neither be lost nor be generated. It only transforms from one form to another.

The plane on which the box is being pushed up is inclined. There are different types of energy transformation takes places. Firstly muscular force and thereby energy is transfer to the kinetic energy, then this kinetic energy gets transfer partially into heat energy and partially into potential energy. Heat energy is generated due to the friction of the inclined surface, and potential energy is generated due to the height of the box above ground surface.

To  know more about kinetic energy, here

https://brainly.com/question/26472013

#SPJ4

Answer:

excessive growth of algae that kills other organisms

Explanation:

if they eat more than it would delete the algea levels. This is should be right.

Answer:

Work done = 466.128 KJ

Explanation:

We can solve this question using the work-energy theorem

Given,

Velocity = 100km/hr = 27.7 m/s (Approx)

Mass = 1215 kg

Initial velocity = 0

Work done =  1/2 m[tex](v-u)^{2}[/tex]

                    = 1/2*1215 * 27.7*27.7

                     = 466.128 KJ

For neat explanation you can refer to the attachment

Answer:

I hope its this one

A the energy transferred ()

My understanding of the concept of when a baby is considered alive is based on the medical, legal, and ethical standards provided by the scientific and medical communities, and it is not based on personal beliefs or opinions.

The determination of when a baby is considered alive is a complex and nuanced issue that is influenced by a variety of factors, including medical, legal, religious, and ethical considerations.

Therefore, it is important to consult with qualified professionals in each area to gain a better understanding of this topic.

For more questions like Baby click the link below:

https://brainly.com/question/30262310

#SPJ4

Complete Question:

What I your view on when the baby I alive? What standard or standard are you using to form your opinion?

Force depends on two main factors: mass and acceleration.

According to Newton's second law of motion, force is equal to the mass of an object multiplied by its acceleration. This means that a more massive object will require more force to accelerate, while a less massive object will require less force. Additionally, the greater the acceleration, the more force will be required to achieve it. This is why a car going 60 mph requires more force to stop than a car going 30 mph.Understanding the relationship between force, mass, and acceleration is crucial in understanding how objects move and interact in the world around us.

To learn more about force:

https://brainly.com/question/17820837

#SPJ4

According to the first law, until a force acts on an object, it will not alter its motion. According to the second law, an object's force is determined by multiplying its mass by its acceleration. According to the third law, when two objects interact, they exert equal-sized and opposite-direction pressures upon one another.

Law of inertia is another name for the first law of Newton. For instance, when the bus driver suddenly applies the breaks while we are riding, we often experience a brief pull to the front. The law of inertia is to blame for the sudden movement that the bus's occupants experienced. Our body keeps moving even after the bus stops because of the inertia of motion, which causes us to move ahead.

Hitting a ball is an example of the second law of motion. When we kick a ball, we direct force in a specific direction.

The third rule is demonstrated by a book laying on a table, which exerts a downward force equal to its weight on the surface.

To know more about Newton's laws:

https://brainly.com/question/13230056

#SPJ4

Anders celsius devise the temperature scale using a mercury thermometer.

To know  more about temperature visit:

https://brainly.com/question/5121135

#SPJ4

The volume of the sphere is  41.89 centimeters cubed.

A sphere is a three-dimensional shape that is made up of all points that are the same distance from the center. It is a perfectly round, symmetrical object that looks the same from any angle. A sphere is one of the most basic shapes in geometry and is found in many everyday objects. A soccer ball, basketball, and even a globe are all examples of spheres. The surface of a sphere is called a spherical surface and has no edges or vertices.

The volume of a sphere is calculated using the formula V = 4/3 * π * r^3, where r is the radius of the sphere. In this case, the radius of the sphere is 12 centimeters, so the volume would be 4/3 * π * 12^3 = 4,188.8 cubic centimeters, which is equivalent to 41.89 cubic centimeters. Therefore, the answer is 41.89 centimeters cubed.

To learn more about sphere

https://brainly.com/question/30271191

#SPJ4