2.5 × 10⁻⁷ atoms will occupy 3.51 mm.
Firstly converting the radius of a tungsten atom from picometer to millimeter.
As per the known fact, 1 pm = 10⁻⁹ mm
Radius in mm = 137 × 10⁻⁹ mm
Radius in mm = 1.37 × 10⁻⁷ mm
Now, if atoms are laid side by side, then the distance occupied by each atom will be equal to it's diameter.
Now, 1.37 × 10⁻⁷ mm space is occupied by : 1 atom
Space occupied by 3.51 mm = (1÷ 1.37 × 10⁻⁷)×3.51
Performing multiplication and division
Space occupied by 3.51 mm = 2.5× 10⁻⁷ atoms
Hence, 2.5× 10⁻⁷ atoms will occupy 3.51 mm.
Learn more about calculations on number of atoms-
https://brainly.com/question/1776363
#SPJ4
A ladybug crawls up the wall, moving 1 meter in 10 seconds. What is the ladybug's average velocity? show your setup, work, signs, and units. Explain your answer.
The average velocity of ladybug crawling up the wall, v = 0.1 m/s.
Equation :To find average velocity using the formula,
v = dx / dt
where,
v is average velocity
dx is distance
dt is time
So, putting the values
We have,
v = 1m / 10s
v = 0.1 m/s
What is average velocity?The difference between the change in position or displacement (x) and the time intervals (t) during which the displacement occurs is known as average velocity. Depending on how the displacement is displaced, the average velocity may be positive or negative. Meters per second (m/s or ms-1) is the standard international unit for average velocity.
To know more about displacement :
https://brainly.com/question/11934397
#SPJ9
For each method - sometimes used a s heuristic, what is the distance from start to end? (ignore any coloring in the boxes)
Manhattan distance is a popular heuristic function for sliding-tile puzzles. It is calculated by tallying the number of moves along the grid that each tile takes to move away from its intended position.
What is the Manhattan distance heuristic?Manhattan distance is a popular heuristic function for sliding-tile puzzles. It is calculated by tallying the number of moves along the grid that each tile takes to move away from its intended position. The obvious option for a heuristic function is the Euclidean (straight-line) distance, which, as far as we are aware, can never underestimate the distance but might do so if there is a target obstacle to avoid on the way there.
Any problem-solving strategy that employs a practical approach or numerous short cuts in order to provide answers that might not be ideal but are adequate given a constrained timeline or deadline is known as a heuristic, or heuristic technique.
To learn more about heuristic technique refer to:
https://brainly.com/question/14789144
#SPJ4
A proton is placed in an electric field of intensity 800 n/c. what are the magnitude and direction of the acceleration of the proton due to this field?
The acceleration of the proton due to this field is 7.66 × 10¹⁰ m/s² in
the direction of the electric field.
What is Electric force on a Charged particle?
The electric force on a charged particle is measured using the following formula.
F=qE
The charge is q and the electric field intensity is E
So, we need the charge on the particle and electric field intensity to calculate the electric force on a charged particle.
Also, from Newton's laws of motion;
F = ma
where m is mass = 1.67×10⁻²⁷kg and a is acceleration
ma = qE
a = qE/m
a = [tex]\frac{1.6 * 10^{-19} *800}{1.67 *10^{-27} }[/tex]
a = 7.66 × 10¹⁰ m/s²
To learn more about Electric force, refer
to https://brainly.com/question/26117248
#SPJ4
A baseball goes from zero to 32 m/s in 0.164 s.
What is its average acceleration?
Answer in units of m/s².
Answer: Доброе утро, ответ 5+5="4
Explanation:
A cube 5.0 cmcm on each side is made of a metal alloy. after you drill a cylindrical hole 2.5 cmcm in diameter all the way through and perpendicular to one face, you find that the cube weighs 6.30 nn.
(a) The density of the metal is 7486.88kg/[tex]m^{3}[/tex]
(b) The cube weigh 9.17N before we drill a hole in it.
The Newton's second rule, the definition of density, and the geometric relationships that enable us to calculate the volume of the given figures must all be applied in order to answer this problem.
The volume of a cube with equal sides is found in this situation by
[tex]V_{c} = l^{3}[/tex]
[tex]V_{c} = 5^{3}[/tex] = 125[tex]cm^{3}[/tex]
When it comes to perforated material, we know that its volume is determined by the cylindrical geometry, or
[tex]V_{d} = \pi r^{2} l[/tex]
[tex]V_{d} = \pi (\frac{2.5}{2}) ^{2} *5[/tex] = 12.5[tex]\pi cm^{3}[/tex]
The net volume would be in this case: ΔV = 125[tex]cm^{3}[/tex] - 12.5[tex]\pi cm^{3}[/tex] = 85.75[tex]cm^{3}[/tex] = 85.75×[tex]10^{-6}[/tex][tex]m^{3}[/tex]
Since we already know the weight and gravity, we can use Newton's second law to get the mass,
F = mg
[tex]m =\frac{6.3}{9.8}[/tex]
m = 0.642kg
Part(a) Based on the relationship between density and the mass and volume units, we must use;
ρ = m/v
ρ = [tex]\frac{0.642}{85.75*10^{-6} }[/tex]
ρ = 7486.88kg/[tex]m^{3}[/tex]
So, the density of the metal is 7486.88kg/[tex]m^{3}[/tex]
Part(b) Next, determine the cube's weight.
W = mg = Vρg
W = 125×[tex]10^{-6}[/tex] × 7486.88 × 9.8
W = 9.17N
The cube weigh 9.17N before we drill a hole in it.
Learn more about volume of a cube here:
https://brainly.com/question/11168779
#SPJ4
How are Molecules different from Atoms?
A. They consist of one or more atoms bonded together.
B. They do not contain neutrons.
C. They do not have nuclei.
D. Their particles do not have electrical charges.
ubat
Answer:
A. They consist of one or more atoms bonded together.
Explanation:
Rolls of aluminu are 304 mm wide and 0.016mm thick. what maximum length of aluminum foil (in m) can be made from 1.10kg of aluminum? density of al 2.70g/cm'
Aluminum foil can be made to a maximum length of 87.76 meters from 1.10 kg of aluminum.
How do you compute density?Density is defined as d = M/V, where d is density, M is mass, and V is volume.Though the SI unit of density is kg/m3, we use g/cm3 for solids, g/ml for liquids, and g/L for gases for convenience.Density is an important concept because it tells us which substances will float and which will sink when placed in a liquid. Substances float in general if their density is less than the density of the liquid in which they are placed.By using the above formula for density
ρ = mass / volume
⇒ As given in the problem Rolls of aluminum foil are 304 mm wide and 0.016-mm thick.
the mass of the aluminum = 1.10-kg
mass = 1100 grams
the density of the aluminum = 2.70 g/cm3
density = 17/3
⇒ 2.70 g/cm3 = 1100 grams /volume
volume = 1100/ 2.70
=407.40 cm3
volume = width ×thickness ×length
407.40 cm3 = 30.4 ×.0016 ×length
⇒ length = 8375.97 cm
= 87.76 meters
Thus, the maximum length of aluminum foil that can be made from 1.10-kg of aluminum would be 87.76 meters.
To learn more about density refer to
https://brainly.com/question/26117248
#SPJ4
An object traveling in a straight line accelerates. What will definitely happen due to the acceleration?
• The distance traveled in a certain time will increase.
O The displacement covered in a certain time will decrease.
O The speed of the object will stay constant.
• The velocity of the object will change.
Answer:
The distance traveled in a certain time will increase
Explanation:
3x+5=40 solve for x to get the answer.
This is question isnt real i just need to talk
with someone
Explanation:
3x=40-5
3x=35
x=35/3
x=11.66 or x=11 2/3
Nuclear fusion can release large amounts of energy.
a. true
b. false
Nuclear fusion can release large amounts of energy is the True statement.
What is nuclear fusion?The nuclear fusion reaction occurs when two or more atom combine together to form a heavier atom. For example, when two hydrogen atoms fuse to form one helium atom.
This is the same process that powers the sun and creates huge amounts of energy several times greater than fission. It also doesn't produce highly radioactive fission products.
The nuclear fusion reaction releases large amount of energy, because Fusion reactions have an energy density many times greater than nuclear fission.
The reactions that produces far greater energy per unit of mass but even though the individual fission reactions are generally much more energetic than individual fusion ones, which are themselves millions of times more energetic than chemical reactions.
Thus, the statement is True.
Learn more about nuclear fusion,
https://brainly.com/question/12701636
#SPJ4
If a gas and a liquid are at the same temperature and pressure, diffusion occurs much faster in the gas because:_________
Diffusion occurs more quickly in gases than in liquids because the space between the constituent particles in gases is higher than in liquids. Gas particles therefore have more kinetic energy and move more quickly.
What causes diffusion to occur more quickly in a gas than a liquid at the same temperature?Because there is more space between the constituent particles in gases than in liquids, diffusion happens more quickly in gases than in liquids. As a result, the kinetic energy and speed of the particles in gas are increased.
Why does diffusion happen more quickly in a gas?Compounds diffuse more swiftly through gases than through liquids depending on the type of substance.
This is due to the fact that particles in a gas are more dispersed and move more quickly than those in a liquid.
To know more about diffusion visit:
https://brainly.com/question/24746577
#SPJ4
I NEED HELP ASAP. I dont understand it
Answer:
I don't have the full details so... Position 1 + Position 2
That's if "0" doesn't count as a position.
Explanation:
"What was the distance traveled" is basically "how much did you travel?"
e.g. Position 1 was 12 miles, and Position 2 was 7. 12 + 7 = 19.
Imagine that you could build a telescope of any size in your backyard. Ultimately, the smallest angular size that could be resolved by this telescope would be governed by the?.
The blurring effects of the Earth's atmosphere would decide the smallest angular size that this telescope could resolve.
The term "angular size" refers to an object's apparent size as seen from an observer on Earth. The least angular size can be affected by the magnitude of lights received by telescopes, which can be changed by the earth's hazy atmosphere. Telescopes collect and amplify light from distant objects. Earth's atmosphere substantially limits astronomical observations for two basic reasons.
First, not all atmospheric wavelengths are equally transparent, and some wavelength regimes are completely out of range for ground-based telescopes. Therefore, while developing a telescope with a specific angular size, the earth's atmosphere must be considered.
To learn more about the angular size as seen from earth. Click, https://brainly.com/question/28417535
#SPJ4
On average, an African elephant is 12,125 lbs. What is the mass of an African elephant in kilograms, expressed in scientific notation (1 lb = 0.4536 kg)?
Answer:
See below
Explanation:
12 125 lbs * .4536 kg/lb = 5499.9 kg = 5 .4999 x 10 ^3 kg
Determine the work done in kj in a piston which has a constant pressure of 25 psi its initial volume is 0.3 m^3 while its final vloume
The work done is 51.71 kJ.
We need to know about work done to solve this problem. The work done in compression depends on the pressure and change in volume. It can be determined as
W = P . ΔV
where W is work done, P is pressure and ΔV is change in volume.
From the question above, we know that
P = 25 psi
ΔV = 0.3 m³
Convert the pressure to pascal
25 psi = 172369 Pa
By substituting the given parameter, we can calculate the work done
W = P . ΔV
W = 172369 . 0.3
W = 51710.7 joule
Convert to kj
W = 51710.7 x 10¯³ kJ
W = 51.71 kJ
Hence, the work done is 51.71 kJ
For more on work done at: https://brainly.com/question/25573309
#SPJ4
Explain: to steer an airboat, rudders sit behind the fan. When the air passes through the turned rudders, it turns the boat. Use Newton's third law to construct an explanation on how the rudders turn the boat
The explanation on how the rudders turn the boat is by redirecting the fluid which results in an opposite force aiding the motion of the boat.
What is Newton's third law of motion?This law was coined by Isaac Newton and it states that when object X exerts a force on another object Y, the object Y must exert a form of counter force which has the same magnitude but opposite in direction.
In the case of the rudder, it redirects the fluid which then exerts an equal force of the same magnitude and an opposite direction. This thereby results in the motion of the boat and is therefore the most appropriate choice.
Read more about Newton's law of motion here https://brainly.com/question/1222214
#SPJ1
What volume, in ml, of 6.0 m sodium hydroxide is required to fully react with the copper (ii) nitrate produced?
The question is incomplete as the mass of copper is also needed to solve this. The given mass of copper is 0.9075 g.
The volume of 6.0 M sodium hydroxide(NaOH) required to fully react with copper nitrate produced is 4.76 ml.
The reaction between copper(Cu) and nitric acid(HNO3) is as follows:
Cu + HNO3 = Cu(NO3)2
According to the above reaction
1 mole of copper produces 1 mole of copper nitrate
Or 63.5 g of copper produces 1 mole of copper nitrate
Thus, 0.9075 g of copper produces 1/63.5 x 0.9075 = 0.0143 moles of copper nitrate
The reaction between sodium hydroxide(NaOH) and copper nitrate {Cu(NO3)2} is as follows:
2NaOH + Cu(NO₃)₂ ---> 2NaNO₃ + Cu(OH)₂
From the above equation,
1 mole of copper nitrate fully reacts with 2 moles of sodium hydroxide
Thus, 0.143 moles of copper nitrate fully reacts with 2 x 0.143 = 0.286 moles of sodium hydroxide
The molarity of the given NaOH solution is 6 M.
Hence its volume would be
Molarity = No. Of moles/Volume of solution(in liters)
6 = 0.286/ Volume
Volume = 0.0476 liters or 47.6 ml.
Hence, the volume of 6.0 M sodium hydroxide(NaOH) required to fully react with the copper nitrate produced is 4.76 ml.
To know more about "molarity", refer to the following link:
https://brainly.com/question/4401006?referrer=searchResults
#SPJ4
The question is incomplete as the mass of copper is also needed to solve this. The given mass of copper is 0.9075 g.
The volume of 6.0 M sodium hydroxide(NaOH) required to fully react with copper nitrate produced is 4.76 ml.
The reaction between copper(Cu) and nitric acid(HNO3) is as follows:
Cu + HNO3 = Cu(NO3)2
According to the above reaction,1 mole of copper produces 1 mole of copper nitrate. Or 63.5 g of copper produces 1 mole of copper nitrate. Thus, 0.9075 g of copper produces 1/63.5 x 0.9075 = 0.0143 moles of copper nitrate. The reaction between sodium hydroxide(NaOH) and copper nitrate {Cu(NO3)2} is as follows:
2NaOH + Cu(NO₃)₂ ---> 2NaNO₃ + Cu(OH)₂
From the above equation,1 mole of copper nitrate fully reacts with 2 moles of sodium hydroxide. Thus, 0.143 moles of copper nitrate fully react with 2 x 0.143 = 0.286 moles of sodium hydroxide. The molarity of the given NaOH solution is 6 M. Hence its volume would be
Molarity = No. Of moles/Volume of solution(in liters)
6 = 0.286/ Volume
Volume = 0.0476 liters or 47.6 ml.
Hence, the volume of 6.0 M sodium hydroxide(NaOH) required to fully react with copper nitrate produced is 4.76 ml.
To know more about "molarity", refer to the following link:
brainly.com/question/4401006?referrer=searchResults
#SPJ4
there was once a crab name mr crabs who had to go to the docter one day . mr crabs is a an animal in the ____ phylum which was not surpising since he has 10 jointed legs
there was once a crab name mr crabs who had to go to the docter one day . mr crabs is a an animal in the arthropods phylum which was not surpising since he has 10 jointed legs
What five classes make up the phylum Arthropoda?Traditional classifications of arthropods place them in the Trilobitomorpha (Trilobites), Chelicerata, Crustacea, Myriapoda, and Hexapoda subphyla.
Arthropod species make up more than 80% of all known extant animal species, with estimates ranging from 170,000 to 5–10 million.
On Earth, arthropods are regarded as the most successful creatures.
Arthropods, however, are also in charge of a number of helpful human functions, including crop pollination, honey production, devouring or parasitizing insect pests, garbage decomposition, and serving as food for various birds, fish, and mammals. Beneficial arthropods flourish in agricultural areas.
learn more about arthropods refer
https://brainly.com/question/20415873
#SPJ9
If the current in a wire is tripled, what effect does this have on the electron drift velocity in the wire?
The effect after the current is tripled is changing the drift velocity by a factor 3.
We need to know about drift velocity of electrons to solve this problem. The drift velocity can be determined as
v = I / (n . A . q)
where v is drift velocity, I is current, n is atom number density, A is surface area and q is the charge.
From the question above, we know that
I2 = 3 . I1
According to drift velocity formula, the drift velocity is proportional to current
v ~ I
Hence, the ratio of drift velocity and current is
v1 / v2 = I1 / I2
substitute the final current (I2)
v1 / v2 = I1 / (3.I1)
v1 / v2 = 1 / 3
v2 = 3v1
For more on drift velocity at: brainly.com/question/25700682
#SPJ4
1.A ball is thrown vertically upwards with a velocity of 49 m/s. Calculate
(i) the maximum height to which it rises,
(ii) the total time it takes to return to the surface of the earth.
(i) Max height is 122.5 meters.
(ii) Total time is 10 seconds.
What is the temperature of a 1.59l flask containing 0.175mol of ne at a pressure of 1.09atm?
The temperature of a 1.59l flask containing 0.175mol of Ne at a pressure of 1.09atm is 120.70 K.
How do you find the temperature of the compound?
We know that the ideal gas law uses the formula:
PV = nRT
where,
P is referred as the pressure, which is measured in atmospheres (atm),
V is referred as the volume, which is measured in cubic meter ([tex]m^{3}[/tex]),
T is referred as the temperature, which is measured in kelvin (K),
R is referred as the ideal gas law constant , i.e., 0.0821 atm(L)/mol(K),
n is known as the number of moles (mol).
Given that,
P = 1 atm = 101 325 Pa
1.09 atm = 1.09 atm x 101 325 Pa/atm = 110 444 Pa
n = 0.175 mol
V = 1.59 x 10⁻³ m³
By substituting the values in the ideal gas law formula,
PV = nRT
110 444 Pa x 1.59 x 10⁻³ m³ = 0.175 mol x 8.314 Jmol⁻¹K⁻¹ x T
T = 120.70 K
To know more about the Ideal Gas Law, visit the given link:
brainly.com/question/14553536
#SPJ4
Sound from the siren of an emergency vehicle has a frequency of 667.2 hz and moves with a velocity of 349.8 m/s. what is the distance from one condensation to the next?
Sound from the siren of an emergency vehicle has a frequency of 667.2 hz and moves with a velocity of 349.8 m/s, thus the distance from one condensation to the next is 0.52m.
Sound wave characteristicsWaves of sound exist. A disturbance of matter that is conveyed from its source outward is how sound is more precisely defined. Anything that is shifted out of its balance is considered a disturbance.
Some sound waves are classified as periodic waves, which means that the matter’s atoms move in a straightforward harmonic fashion.
As, a string vibrating creates a sound wave. A portion of the string’s energy is used to compress and expand the surrounding air as it oscillates back and forth.
Pressures are a little bit higher and lower as a result. Low pressure regions are rarefactions, and higher-pressure regions are compressions. The air is moved by the pressure anomaly.
Provided that,
∨= 667.2 hz
V= 349.8 m/s
λ =?
∨ = x/λ
λ = 349.8/667.2
λ = 0.52m
To know more about sound waves, visit:
https://brainly.com/question/21995826
#SPJ4
What is the thickness of an anti-reflective coating (n = 1.3) that must be put on a lens (n = 1.5) in order to minimize reflection at a wavelength of 550 nanometers?
The thickness of an anti-reflective coating is 96 nm.
Define Wavelength?
The wavelength in waves is defined as the distance between the crests and troughs. It can be calculated in the meter in the SI system. The crest is the upper part of the wave, and the trough is the lower part.
Given that,
The index of the anti-reflective coating is n = 1.3
The wavelength is denoted as λ = 500 nm = 500×[tex]10^{-9}[/tex]m
The expression for interference can be written as
2t = (m+½)λf
m=0 is the minimum reflection order.
λf is referred to as the wavelength of the film.
By substituting the values in the above expression we get,
2t = (m+½)λf
2t = (0+½)λf
t = λf/4 (this will noted as equation 1 for more clarity )
The wavelength of the light in a medium with refractive index can be expressed as
λf = λ/n
By substituting the values in equation1 we get,
t = λf/4
t = (λ/n)/4
t = λ/4n = 500/(4×1.3) = 96 nm.
Therefore , the thickness of an anti-reflective coating is 96nm.
To know more about the wavelength, visit the given link:
https://brainly.com/question/22103397
#SPJ4
What do dependent and independent variables mean in science?
Answer:
Independent variable: These are the factors or conditions that you manipulate in an experiment.
Dependent variables: These are the factor that you observe or measure.
This kind of research allows the researcher to either describe a situation or phenomenon or the relationship between two or more variables without any interference from the proponent.
What volume of h2 measured at 26 c and 100 kpa will be produced from 3.25g of na?
40.1L volume of h2 gas that is measured at 26 c and 100 kpa will be produced from Na of mass given as 3.25g.
What does pressure unit kPa mean?Kilopascal (kPa), a 1,000-fold increase in the meter-kilogram-second system’s measure of pressure and tension (the International System of Units [SI]).
Blaise Pascal, a French mathematician and scientist, is honored by its name.
How is kPa determined?The formula below can be used to translate kg/cm2 into kPa:
A kPa equals 1000 pascals (Pa)
1 kg/cm2 is equal to 98066.5 pascals (Pa), or kPa value multiplied by 1000 Pa.
Thereafter,
T = 26°C
= 299K
P = 100kPa
P= 100/101.325
=0.986923 atm
mass = 3.25g
Atomic mas of H = 1.00784
molar mass of H2 gas = 2x10.00784
= 2.01568g/mol
mole of H2 in 3.25g = 3.25/2.01568 = 1.612359 mol
This gas provided in the question follows the ideal gas equation, so it can be written as
PV = nRT
⇒ V = nRT/P
= (1.612359x 0.0821x 299) / 0.986929
⇒ V = 40.104473
V = 40.1 L
Thus, the volume of gas was found to be 40.1Liter.
To know more about ideal gas law, visit:
https://brainly.com/question/28257995
#SPJ4
Amy and ellie left school at the same time, but she and ellie arrived at their homes at the same time. compare the girls speeds. use evidence of the distance each girl travels at the time it takes to travel that distance to support your claim. explain your reasoning.
Please help, don’t need explanations
The cyclist gets chemical energy from the food.
Peddling transfers mechanical energy to the Dynamo.
Electrical energy is transferred through the wires.
The bulb transfers energy to the room by converting electrical energy into light energy and heat
The sun is a store of solar energy.
Energy is transferred to solar cell by solar panel.
Electrical energy is transferred through the wires.
Energy is transferred to water by conduction.
The water is a store of hydro energy.
Energy is transferred to room by heat energy.
#SPJ9
The following are summary statistics on triglyceride levels measured in a sample of n= 200 participants. are there outliers? justify your answer.
Statistics on triglyceride levels measured that there are no outliers as the minimum value (38) exceeds the lower limit of outliers and the maximum value (394) is less than the upper limit of outliers.
The risk of heart disease and stroke is increased by a number of disorders, including obesity and metabolic syndrome, which is characterised by excess body fat around the waist, high blood pressure, high triglycerides, high blood sugar, and abnormal cholesterol levels.
Your doctor categorises elevated triglyceride levels as: 150–199 mg/dL for mild. 200 to 499 mg/dL is moderate. Significant: More than 500 mg/dL.
Choosing a healthy lifestyle can help lower elevated triglyceride levels. Diet. Avoid simple carbs like sugar, white flour-based foods, fructose, trans fats, and food items containing hydrogenated oils or fats. Olive oil and canola oil are examples of plant-based fats that can be used in place of the fat present in meats.
Learn more about triglyceride:
https://brainly.com/question/23737740
#SPJ4
The complete question is ''The following are summary statistics on triglyceride levels measured in a sample of n = 200 participants. Are there outliers? Justify your answer.
n = 200 X = 203 s = 64 Min = 38 Q1 = 59 Median = 180 Q3 = 243 Max = 394''
Given that the temperature change observed is 11.5 c when 4.436 g of naoh are added to 150.0 ml of water. what is the heat energy in kj that is produced?
The heat energy in kj that is produced is 7.21kj given that the temperature change observed is 11.5 c when 4.436 g of naoh are added to 150.0 ml of water
It is given that 4.436g is the mass of NaOH. The density and volume of water it has been added to was also given.
We need to convert the water's volume to mass
Density = mass / volume
Thus, mass = density * volume
150.0mL H2O * (1.000 g/mL) = 150.0 g H2O.
Now simply add the two masses: 150g + 4.436g = 154.436g
Q = mcdT
Q = heat added or removed
m = mass of substance = 154.436g
c = specific heat of this solution is 4.06j/g C
dT = change in temperature
Q = 154.436g * 4.06 * 11.5
Q =7,210.62J
Q = 7.21kj
To learn more about the difference between heat energy and temperature. Click, https://brainly.com/question/20038450
#SPJ4
